Commit 5c3bf6cba791 ("bonding: assign random address if device address is same as bond") fixed an issue where, after releasing the first slave and re-adding it to the bond with fail_over_mac=follow, both the active and backup slaves could end up with duplicate MAC addresses. To avoid this, the new slave was assigned a random address.
However, if this happens when adding the very first slave, the bond’s hardware address is set to match the slave’s. Later, during the fail_over_mac=follow check, the slave’s MAC is randomized because it naturally matches the bond, which is incorrect.
The issue is normally hidden since the first slave usually becomes the active one, which restores the bond's MAC address. However, if another slave is selected as the initial active interface, the issue becomes visible.
Fix this by assigning a random address only when slaves already exist in the bond.
Fixes: 5c3bf6cba791 ("bonding: assign random address if device address is same as bond") Reported-by: Qiuling Ren qren@redhat.com Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- drivers/net/bonding/bond_main.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 257333c88710..8832bc9f107b 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2132,6 +2132,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, memcpy(ss.__data, bond_dev->dev_addr, bond_dev->addr_len); } else if (bond->params.fail_over_mac == BOND_FOM_FOLLOW && BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP && + bond_has_slaves(bond) && memcmp(slave_dev->dev_addr, bond_dev->dev_addr, bond_dev->addr_len) == 0) { /* Set slave to random address to avoid duplicate mac * address in later fail over.
Add a test to check each value of bond fail_over_mac option.
Also fix a minor garp_test print issue.
Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- .../drivers/net/bonding/bond_options.sh | 139 +++++++++++++++++- .../drivers/net/bonding/bond_topo_2d1c.sh | 3 + .../drivers/net/bonding/bond_topo_3d1c.sh | 2 + 3 files changed, 142 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_options.sh b/tools/testing/selftests/drivers/net/bonding/bond_options.sh index 7bc148889ca7..e3f3cc803b56 100755 --- a/tools/testing/selftests/drivers/net/bonding/bond_options.sh +++ b/tools/testing/selftests/drivers/net/bonding/bond_options.sh @@ -7,6 +7,7 @@ ALL_TESTS=" prio arp_validate num_grat_arp + fail_over_mac "
lib_dir=$(dirname "$0") @@ -352,8 +353,8 @@ garp_test()
exp_num=$(echo "${param}" | cut -f6 -d ' ') active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave") - slowwait_for_counter $((exp_num + 5)) $exp_num \ - tc_rule_handle_stats_get "dev s${active_slave#eth} ingress" 101 ".packets" "-n ${g_ns}" + slowwait_for_counter $((exp_num + 5)) $exp_num tc_rule_handle_stats_get \ + "dev s${active_slave#eth} ingress" 101 ".packets" "-n ${g_ns}" &> /dev/null
# check result real_num=$(tc_rule_handle_stats_get "dev s${active_slave#eth} ingress" 101 ".packets" "-n ${g_ns}") @@ -376,6 +377,140 @@ num_grat_arp() done }
+check_all_mac_same() +{ + RET=0 + # all slaves should have same mac address (with the first port's mac) + local bond_mac=$(ip -n "$s_ns" -j link show bond0 | jq -r '.[]["address"]') + local eth0_mac=$(ip -n "$s_ns" -j link show eth0 | jq -r '.[]["address"]') + local eth1_mac=$(ip -n "$s_ns" -j link show eth1 | jq -r '.[]["address"]') + local eth2_mac=$(ip -n "$s_ns" -j link show eth2 | jq -r '.[]["address"]') + if [ "$bond_mac" != "${mac[0]}" ] || [ "$eth0_mac" != "$bond_mac" ] || \ + [ "$eth1_mac" != "$bond_mac" ] || [ "$eth2_mac" != "$bond_mac" ]; then + RET=1 + fi +} + +check_bond_mac_same_with_first() +{ + RET=0 + # bond mac address should be same with the first added slave + local bond_mac=$(ip -n "$s_ns" -j link show bond0 | jq -r '.[]["address"]') + if [ "$bond_mac" != "${mac[0]}" ]; then + RET=1 + fi +} + +check_bond_mac_same_with_active() +{ + RET=0 + # bond mac address should be same with active slave + local bond_mac=$(ip -n "$s_ns" -j link show bond0 | jq -r '.[]["address"]') + local active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave") + local active_slave_mac=$(ip -n "$s_ns" -j link show "$active_slave" | jq -r '.[]["address"]') + if [ "$bond_mac" != "$active_slave_mac" ]; then + RET=1 + fi +} + +check_backup_slave_mac_not_change() +{ + RET=0 + # backup slave's mac address is not changed + if ip -n "$s_ns" -d -j link show type bond_slave | jq -e '.[] + | select(.linkinfo.info_slave_data.state=="BACKUP") + | select(.address != .linkinfo.info_slave_data.perm_hwaddr)' &> /dev/null; then + RET=1 + fi +} + +check_backup_slave_mac_inherit() +{ + local backup_mac + RET=0 + + # backup slaves should use mac[1] or mac[2] + local backup_macs=$(ip -n "$s_ns" -d -j link show type bond_slave | \ + jq -r '.[] | select(.linkinfo.info_slave_data.state=="BACKUP") | .address') + for backup_mac in $backup_macs; do + if [ "$backup_mac" != "${mac[1]}" ] && [ "$backup_mac" != "${mac[2]}" ]; then + RET=1 + fi + done +} + +check_first_slave_random_mac() +{ + RET=0 + # remove the first added slave and added it back + ip -n "$s_ns" link set eth0 nomaster + ip -n "$s_ns" link set eth0 master bond0 + + # the first slave should use random mac address + eth0_mac=$(ip -n "$s_ns" -j link show eth0 | jq -r '.[]["address"]') + [ "$eth0_mac" = "${mac[0]}" ] && RET=1 + log_test "bond fail_over_mac follow" "random first slave mac" + + # remove the first slave, the permanent MAC address should be restored back + ip -n "$s_ns" link set eth0 nomaster + eth0_mac=$(ip -n "$s_ns" -j link show eth0 | jq -r '.[]["address"]') + [ "$eth0_mac" != "${mac[0]}" ] && RET=1 +} + +do_active_backup_failover() +{ + local active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave") + ip -n ${s_ns} link set ${active_slave} down + slowwait 2 active_slave_changed $active_slave + ip -n ${s_ns} link set ${active_slave} up +} + +fail_over_mac() +{ + # Bring down the first interface on the switch to force the bond to + # select another active interface instead of the first one that joined. + ip -n "$g_ns" link set s0 down + + # fail_over_mac none + bond_reset "mode active-backup miimon 100 fail_over_mac 0" + check_all_mac_same + log_test "fail_over_mac 0" "all slaves have same mac" + do_active_backup_failover + check_all_mac_same + log_test "fail_over_mac 0" "failover: all slaves have same mac" + + # fail_over_mac active + bond_reset "mode active-backup miimon 100 fail_over_mac 1" + check_bond_mac_same_with_active + log_test "fail_over_mac 1" "bond mac is same with active slave mac" + check_backup_slave_mac_not_change + log_test "fail_over_mac 1" "backup slave mac is not changed" + do_active_backup_failover + check_bond_mac_same_with_active + log_test "fail_over_mac 1" "failover: bond mac is same with active slave mac" + check_backup_slave_mac_not_change + log_test "fail_over_mac 1" "failover: backup slave mac is not changed" + + # fail_over_mac follow + bond_reset "mode active-backup miimon 100 fail_over_mac 2" + check_bond_mac_same_with_first + log_test "fail_over_mac 2" "bond mac is same with first slave mac" + check_bond_mac_same_with_active + log_test "fail_over_mac 2" "bond mac is same with active slave mac" + check_backup_slave_mac_inherit + log_test "fail_over_mac 2" "backup slave mac inherit" + do_active_backup_failover + check_bond_mac_same_with_first + log_test "fail_over_mac 2" "failover: bond mac is same with first slave mac" + check_bond_mac_same_with_active + log_test "fail_over_mac 2" "failover: bond mac is same with active slave mac" + check_backup_slave_mac_inherit + log_test "fail_over_mac 2" "failover: backup slave mac inherit" + check_first_slave_random_mac + log_test "fail_over_mac 2" "first slave mac random" + +} + trap cleanup EXIT
setup_prepare diff --git a/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh b/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh index 195ef83cfbf1..167aa4a4a12a 100644 --- a/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh +++ b/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh @@ -39,6 +39,8 @@ g_ip4="192.0.2.254" s_ip6="2001:db8::1" c_ip6="2001:db8::10" g_ip6="2001:db8::254" +mac[0]="00:0a:0b:0c:0d:01" +mac[1]="00:0a:0b:0c:0d:02"
gateway_create() { @@ -62,6 +64,7 @@ server_create()
for i in $(seq 0 1); do ip -n ${s_ns} link add eth${i} type veth peer name s${i} netns ${g_ns} + ip -n "${s_ns}" link set "eth${i}" addr "${mac[$i]}"
ip -n ${g_ns} link set s${i} up ip -n ${g_ns} link set s${i} master br0 diff --git a/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh b/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh index 3a1333d9a85b..23a2932301cc 100644 --- a/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh +++ b/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh @@ -26,6 +26,7 @@ # +-------------------------------------+
source bond_topo_2d1c.sh +mac[2]="00:0a:0b:0c:0d:03"
setup_prepare() { @@ -36,6 +37,7 @@ setup_prepare() # Add the extra device as we use 3 down links for bond0 local i=2 ip -n ${s_ns} link add eth${i} type veth peer name s${i} netns ${g_ns} + ip -n "${s_ns}" link set "eth${i}" addr "${mac[$i]}" ip -n ${g_ns} link set s${i} up ip -n ${g_ns} link set s${i} master br0 ip -n ${s_ns} link set eth${i} master bond0
Hangbin Liu liuhangbin@gmail.com wrote:
Commit 5c3bf6cba791 ("bonding: assign random address if device address is same as bond") fixed an issue where, after releasing the first slave and re-adding it to the bond with fail_over_mac=follow, both the active and backup slaves could end up with duplicate MAC addresses. To avoid this, the new slave was assigned a random address.
However, if this happens when adding the very first slave, the bond’s hardware address is set to match the slave’s. Later, during the fail_over_mac=follow check, the slave’s MAC is randomized because it naturally matches the bond, which is incorrect.
The description here seems confusing to me; what does "this" refer to? I don't understand the sequence of events that lead to the issue being fixed here.
I wonder if there's another bug somewhere, since nominally when releasing the last interface in the bond, __bond_release_one() should randomize the bond's MAC address, so it shouldn't match when adding (or re-adding ?) the first interface to the bond.
-J
The issue is normally hidden since the first slave usually becomes the active one, which restores the bond's MAC address. However, if another slave is selected as the initial active interface, the issue becomes visible.
Fix this by assigning a random address only when slaves already exist in the bond.
Fixes: 5c3bf6cba791 ("bonding: assign random address if device address is same as bond") Reported-by: Qiuling Ren qren@redhat.com Signed-off-by: Hangbin Liu liuhangbin@gmail.com
drivers/net/bonding/bond_main.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 257333c88710..8832bc9f107b 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2132,6 +2132,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, memcpy(ss.__data, bond_dev->dev_addr, bond_dev->addr_len); } else if (bond->params.fail_over_mac == BOND_FOM_FOLLOW && BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP &&
bond_has_slaves(bond) &&
- address in later fail over.
-- 2.50.1
--- -Jay Vosburgh, jv@jvosburgh.net
On Fri, Aug 22, 2025 at 05:21:30PM -0700, Jay Vosburgh wrote:
Hangbin Liu liuhangbin@gmail.com wrote:
Commit 5c3bf6cba791 ("bonding: assign random address if device address is same as bond") fixed an issue where, after releasing the first slave and re-adding it to the bond with fail_over_mac=follow, both the active and backup slaves could end up with duplicate MAC addresses. To avoid this, the new slave was assigned a random address.
However, if this happens when adding the very first slave, the bond’s hardware address is set to match the slave’s. Later, during the fail_over_mac=follow check, the slave’s MAC is randomized because it naturally matches the bond, which is incorrect.
The description here seems confusing to me; what does "this" refer to? I don't understand the sequence of events that lead to the issue being fixed here.
I wonder if there's another bug somewhere, since nominally when releasing the last interface in the bond, __bond_release_one() should randomize the bond's MAC address, so it shouldn't match when adding (or re-adding ?) the first interface to the bond.
Sorry I didn't make it clear. A easy reproducer would describe the issue. e.g. (omit the lo interface)
[root@virtme-ng net]# ip link add type veth [root@virtme-ng net]# ip link add bond0 type bond mode 1 miimon 100 fail_over_mac 2 [root@virtme-ng net]# ip link show 3: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 02:0a:04:c2:d6:21 brd ff:ff:ff:ff:ff:ff 4: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 82:a8:52:f4:81:4e brd ff:ff:ff:ff:ff:ff 5: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 92:5d:9c:47:e7:53 brd ff:ff:ff:ff:ff:ff [root@virtme-ng net]# ip link set veth0 master bond0 [root@virtme-ng net]# ip link show 3: veth0@veth1: <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP,M-DOWN> mtu 1500 qdisc noqueue master bond0 state LOWERLAYERDOWN mode DEFAULT group default qlen 1000 link/ether 4e:b5:4a:b4:03:18 brd ff:ff:ff:ff:ff:ff 4: veth1@veth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 82:a8:52:f4:81:4e brd ff:ff:ff:ff:ff:ff 5: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 02:0a:04:c2:d6:21 brd ff:ff:ff:ff:ff:ff
Here we can see the veth0's mac address is randomized. The reason is in function bond_enslave(), we set the bond mac address to the same as slave's if it's the first one.
/* If this is the first slave, then we need to set the master's hardware * address to be the same as the slave's. */ if (!bond_has_slaves(bond) && bond->dev->addr_assign_type == NET_ADDR_RANDOM) { res = bond_set_dev_addr(bond->dev, slave_dev); if (res) goto err_undo_flags; }
And later
} else if (bond->params.fail_over_mac == BOND_FOM_FOLLOW && BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP && memcmp(slave_dev->dev_addr, bond_dev->dev_addr, bond_dev->addr_len) == 0) { /* Set slave to random address to avoid duplicate mac * address in later fail over. */ eth_random_addr(ss.__data); } else {
Here we check the bond and slave's mac address, which would be the same definitely, which cause the first slave's mac got changed.
Thanks Hangbin
The issue is normally hidden since the first slave usually becomes the active one, which restores the bond's MAC address. However, if another slave is selected as the initial active interface, the issue becomes visible.
Fix this by assigning a random address only when slaves already exist in the bond.
Fixes: 5c3bf6cba791 ("bonding: assign random address if device address is same as bond") Reported-by: Qiuling Ren qren@redhat.com Signed-off-by: Hangbin Liu liuhangbin@gmail.com
drivers/net/bonding/bond_main.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 257333c88710..8832bc9f107b 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2132,6 +2132,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, memcpy(ss.__data, bond_dev->dev_addr, bond_dev->addr_len); } else if (bond->params.fail_over_mac == BOND_FOM_FOLLOW && BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP &&
bond_has_slaves(bond) &&
- address in later fail over.
-- 2.50.1
-Jay Vosburgh, jv@jvosburgh.net
linux-kselftest-mirror@lists.linaro.org
-
Hangbin Liu -
Jay Vosburgh