Make sv48 the default address space for mmap as some applications currently depend on this assumption. Users can now select a desired address space using a non-zero hint address to mmap. Previously, requesting the default address space from mmap by passing zero as the hint address would result in using the largest address space possible. Some applications depend on empty bits in the virtual address space, like Go and Java, so this patch provides more flexibility for application developers.
-Charlie
--- v5: - Minor wording change in documentation - Change some parenthesis in arch_get_mmap_ macros - Added case for addr==0 in arch_get_mmap_ because without this, programs would crash if RLIMIT_STACK was modified before executing the program. This was tested using the libhugetlbfs tests.
v4: - Split testcases/document patch into test cases, in-code documentation, and formal documentation patches - Modified the mmap_base macro to be more legible and better represent memory layout - Fixed documentation to better reflect the implmentation - Renamed DEFAULT_VA_BITS to MMAP_VA_BITS - Added additional test case for rlimit changes ---
Charlie Jenkins (4): RISC-V: mm: Restrict address space for sv39,sv48,sv57 RISC-V: mm: Add tests for RISC-V mm RISC-V: mm: Update pgtable comment documentation RISC-V: mm: Document mmap changes
Documentation/riscv/vm-layout.rst | 22 +++ arch/riscv/include/asm/elf.h | 2 +- arch/riscv/include/asm/pgtable.h | 20 ++- arch/riscv/include/asm/processor.h | 46 +++++- tools/testing/selftests/riscv/Makefile | 2 +- tools/testing/selftests/riscv/mm/.gitignore | 1 + tools/testing/selftests/riscv/mm/Makefile | 21 +++ .../selftests/riscv/mm/testcases/mmap.c | 133 ++++++++++++++++++ 8 files changed, 234 insertions(+), 13 deletions(-) create mode 100644 tools/testing/selftests/riscv/mm/.gitignore create mode 100644 tools/testing/selftests/riscv/mm/Makefile create mode 100644 tools/testing/selftests/riscv/mm/testcases/mmap.c
Make sv48 the default address space for mmap as some applications currently depend on this assumption. A hint address passed to mmap will cause the largest address space that fits entirely into the hint to be used. If the hint is less than or equal to 1<<38, an sv39 address will be used. An exception is that if the hint address is 0, then a sv48 address will be used. After an address space is completely full, the next smallest address space will be used.
Signed-off-by: Charlie Jenkins charlie@rivosinc.com --- arch/riscv/include/asm/elf.h | 2 +- arch/riscv/include/asm/pgtable.h | 12 +++++++- arch/riscv/include/asm/processor.h | 46 +++++++++++++++++++++++++----- 3 files changed, 51 insertions(+), 9 deletions(-)
diff --git a/arch/riscv/include/asm/elf.h b/arch/riscv/include/asm/elf.h index 30e7d2455960..1b57f13a1afd 100644 --- a/arch/riscv/include/asm/elf.h +++ b/arch/riscv/include/asm/elf.h @@ -49,7 +49,7 @@ extern bool compat_elf_check_arch(Elf32_Ehdr *hdr); * the loader. We need to make sure that it is out of the way of the program * that it will "exec", and that there is sufficient room for the brk. */ -#define ELF_ET_DYN_BASE ((TASK_SIZE / 3) * 2) +#define ELF_ET_DYN_BASE ((DEFAULT_MAP_WINDOW / 3) * 2)
#ifdef CONFIG_64BIT #ifdef CONFIG_COMPAT diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h index 75970ee2bda2..e13f5872bfe9 100644 --- a/arch/riscv/include/asm/pgtable.h +++ b/arch/riscv/include/asm/pgtable.h @@ -63,12 +63,22 @@ * position vmemmap directly below the VMALLOC region. */ #ifdef CONFIG_64BIT +#define VA_BITS_SV39 39 +#define VA_BITS_SV48 48 +#define VA_BITS_SV57 57 + +#define VA_USER_SV39 (UL(1) << (VA_BITS_SV39 - 1)) +#define VA_USER_SV48 (UL(1) << (VA_BITS_SV48 - 1)) +#define VA_USER_SV57 (UL(1) << (VA_BITS_SV57 - 1)) + #define VA_BITS (pgtable_l5_enabled ? \ - 57 : (pgtable_l4_enabled ? 48 : 39)) + VA_BITS_SV57 : (pgtable_l4_enabled ? VA_BITS_SV48 : VA_BITS_SV39)) #else #define VA_BITS 32 #endif
+#define MMAP_VA_BITS ((VA_BITS >= VA_BITS_SV48) ? VA_BITS_SV48 : VA_BITS) + #define VMEMMAP_SHIFT \ (VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT) #define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT) diff --git a/arch/riscv/include/asm/processor.h b/arch/riscv/include/asm/processor.h index 6fb8bbec8459..d889dabada46 100644 --- a/arch/riscv/include/asm/processor.h +++ b/arch/riscv/include/asm/processor.h @@ -12,20 +12,52 @@
#include <asm/ptrace.h>
-/* - * This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE / 3) - -#define STACK_TOP TASK_SIZE #ifdef CONFIG_64BIT +#define DEFAULT_MAP_WINDOW (UL(1) << (MMAP_VA_BITS - 1)) #define STACK_TOP_MAX TASK_SIZE_64 + +#define arch_get_mmap_end(addr, len, flags) \ +({ \ + unsigned long mmap_end; \ + if ((addr) >= VA_USER_SV57) \ + mmap_end = STACK_TOP_MAX; \ + else if ((((addr) >= VA_USER_SV48)) && (VA_BITS >= VA_BITS_SV48)) \ + mmap_end = VA_USER_SV48; \ + else if ((addr) == 0) \ + mmap_end = DEFAULT_MAP_WINDOW; \ + else \ + mmap_end = VA_USER_SV39; \ + mmap_end; \ +}) + +#define arch_get_mmap_base(addr, base) \ +({ \ + unsigned long mmap_base; \ + if (((addr) >= VA_USER_SV57) && (VA_BITS >= VA_BITS_SV57)) \ + mmap_base = (base) + (VA_USER_SV57 - DEFAULT_MAP_WINDOW); \ + else if ((((addr) >= VA_USER_SV48)) && (VA_BITS >= VA_BITS_SV48)) \ + mmap_base = (base) + (VA_USER_SV48 - DEFAULT_MAP_WINDOW); \ + else if ((addr) == 0) \ + mmap_base = (base); \ + else \ + mmap_base = (base) + (VA_USER_SV39 - DEFAULT_MAP_WINDOW); \ + mmap_base; \ +}) + #else +#define DEFAULT_MAP_WINDOW TASK_SIZE #define STACK_TOP_MAX TASK_SIZE #endif #define STACK_ALIGN 16
+#define STACK_TOP DEFAULT_MAP_WINDOW + +/* + * This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE PAGE_ALIGN(DEFAULT_MAP_WINDOW / 3) + #ifndef __ASSEMBLY__
struct task_struct;
Add tests that enforce mmap hint address behavior. mmap should default to sv48. mmap will provide an address at the highest address space that can fit into the hint address, unless the hint address is less than sv39 and not 0, then it will return a sv39 address. In addition, ensure that rlimit changes do not cause mmap to fail.
Signed-off-by: Charlie Jenkins charlie@rivosinc.com --- tools/testing/selftests/riscv/Makefile | 2 +- tools/testing/selftests/riscv/mm/.gitignore | 1 + tools/testing/selftests/riscv/mm/Makefile | 21 +++ .../selftests/riscv/mm/testcases/mmap.c | 133 ++++++++++++++++++ 4 files changed, 156 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/riscv/mm/.gitignore create mode 100644 tools/testing/selftests/riscv/mm/Makefile create mode 100644 tools/testing/selftests/riscv/mm/testcases/mmap.c
diff --git a/tools/testing/selftests/riscv/Makefile b/tools/testing/selftests/riscv/Makefile index 32a72902d045..0fee58f990ae 100644 --- a/tools/testing/selftests/riscv/Makefile +++ b/tools/testing/selftests/riscv/Makefile @@ -5,7 +5,7 @@ ARCH ?= $(shell uname -m 2>/dev/null || echo not)
ifneq (,$(filter $(ARCH),riscv)) -RISCV_SUBTARGETS ?= hwprobe +RISCV_SUBTARGETS ?= hwprobe mm else RISCV_SUBTARGETS := endif diff --git a/tools/testing/selftests/riscv/mm/.gitignore b/tools/testing/selftests/riscv/mm/.gitignore new file mode 100644 index 000000000000..9a6f303edcd3 --- /dev/null +++ b/tools/testing/selftests/riscv/mm/.gitignore @@ -0,0 +1 @@ +mmap diff --git a/tools/testing/selftests/riscv/mm/Makefile b/tools/testing/selftests/riscv/mm/Makefile new file mode 100644 index 000000000000..cf68e63e7495 --- /dev/null +++ b/tools/testing/selftests/riscv/mm/Makefile @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0 +# Originally tools/testing/selftests/arm64/signal + +# Additional include paths needed by kselftest.h and local headers +CFLAGS += -D_GNU_SOURCE -std=gnu99 -I. + +SRCS := $(filter-out testcases/testcases.c,$(wildcard testcases/*.c)) +PROGS := $(patsubst %.c,%,$(SRCS)) + +# Generated binaries to be installed by top KSFT script +TEST_GEN_PROGS := $(notdir $(PROGS)) + +# Get Kernel headers installed and use them. + +# Including KSFT lib.mk here will also mangle the TEST_GEN_PROGS list +# to account for any OUTPUT target-dirs optionally provided by +# the toplevel makefile +include ../../lib.mk + +$(TEST_GEN_PROGS): $(PROGS) + cp $(PROGS) $(OUTPUT)/ diff --git a/tools/testing/selftests/riscv/mm/testcases/mmap.c b/tools/testing/selftests/riscv/mm/testcases/mmap.c new file mode 100644 index 000000000000..d8e751f7b8c9 --- /dev/null +++ b/tools/testing/selftests/riscv/mm/testcases/mmap.c @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include <sys/mman.h> +#include <sys/resource.h> +#include <sys/time.h> + +#include "../../kselftest_harness.h" +struct addresses { + int *no_hint; + int *on_37_addr; + int *on_38_addr; + int *on_46_addr; + int *on_47_addr; + int *on_55_addr; + int *on_56_addr; +}; + +void do_mmaps(struct addresses *mmap_addresses) +{ + // Place all of the hint addresses on the boundaries of mmap + // sv39, sv48, sv57 + // User addresses end at 1<<38, 1<<47, 1<<56 respectively + void *on_37_bits = (void *)(1UL << 37); + void *on_38_bits = (void *)(1UL << 38); + void *on_46_bits = (void *)(1UL << 46); + void *on_47_bits = (void *)(1UL << 47); + void *on_55_bits = (void *)(1UL << 55); + void *on_56_bits = (void *)(1UL << 56); + + int prot = PROT_READ | PROT_WRITE; + int flags = MAP_PRIVATE | MAP_ANONYMOUS; + + mmap_addresses->no_hint = + mmap(NULL, 5 * sizeof(int), prot, flags, 0, 0); + mmap_addresses->on_37_addr = + mmap(on_37_bits, 5 * sizeof(int), prot, flags, 0, 0); + mmap_addresses->on_38_addr = + mmap(on_38_bits, 5 * sizeof(int), prot, flags, 0, 0); + mmap_addresses->on_46_addr = + mmap(on_46_bits, 5 * sizeof(int), prot, flags, 0, 0); + mmap_addresses->on_47_addr = + mmap(on_47_bits, 5 * sizeof(int), prot, flags, 0, 0); + mmap_addresses->on_55_addr = + mmap(on_55_bits, 5 * sizeof(int), prot, flags, 0, 0); + mmap_addresses->on_56_addr = + mmap(on_56_bits, 5 * sizeof(int), prot, flags, 0, 0); +} + +TEST(default_rlimit) +{ +// Only works on 64 bit +#if __riscv_xlen == 64 + struct addresses mmap_addresses; + + do_mmaps(&mmap_addresses); + + EXPECT_NE(mmap_addresses.no_hint, MAP_FAILED); + EXPECT_NE(mmap_addresses.on_37_addr, MAP_FAILED); + EXPECT_NE(mmap_addresses.on_38_addr, MAP_FAILED); + EXPECT_NE(mmap_addresses.on_46_addr, MAP_FAILED); + EXPECT_NE(mmap_addresses.on_47_addr, MAP_FAILED); + EXPECT_NE(mmap_addresses.on_55_addr, MAP_FAILED); + EXPECT_NE(mmap_addresses.on_56_addr, MAP_FAILED); + + EXPECT_LT((unsigned long)mmap_addresses.no_hint, 1UL << 47); + EXPECT_LT((unsigned long)mmap_addresses.on_37_addr, 1UL << 38); + EXPECT_LT((unsigned long)mmap_addresses.on_38_addr, 1UL << 38); + EXPECT_LT((unsigned long)mmap_addresses.on_46_addr, 1UL << 38); + EXPECT_LT((unsigned long)mmap_addresses.on_47_addr, 1UL << 47); + EXPECT_LT((unsigned long)mmap_addresses.on_55_addr, 1UL << 47); + EXPECT_LT((unsigned long)mmap_addresses.on_56_addr, 1UL << 56); +#endif +} + +TEST(zero_rlimit) +{ +// Only works on 64 bit +#if __riscv_xlen == 64 + struct addresses mmap_addresses; + struct rlimit rlim_new = { .rlim_cur = 0, .rlim_max = RLIM_INFINITY }; + + setrlimit(RLIMIT_STACK, &rlim_new); + + do_mmaps(&mmap_addresses); + + EXPECT_NE(mmap_addresses.no_hint, MAP_FAILED); + EXPECT_NE(mmap_addresses.on_37_addr, MAP_FAILED); + EXPECT_NE(mmap_addresses.on_38_addr, MAP_FAILED); + EXPECT_NE(mmap_addresses.on_46_addr, MAP_FAILED); + EXPECT_NE(mmap_addresses.on_47_addr, MAP_FAILED); + EXPECT_NE(mmap_addresses.on_55_addr, MAP_FAILED); + EXPECT_NE(mmap_addresses.on_56_addr, MAP_FAILED); + + EXPECT_LT((unsigned long)mmap_addresses.no_hint, 1UL << 47); + EXPECT_LT((unsigned long)mmap_addresses.on_37_addr, 1UL << 38); + EXPECT_LT((unsigned long)mmap_addresses.on_38_addr, 1UL << 38); + EXPECT_LT((unsigned long)mmap_addresses.on_46_addr, 1UL << 38); + EXPECT_LT((unsigned long)mmap_addresses.on_47_addr, 1UL << 47); + EXPECT_LT((unsigned long)mmap_addresses.on_55_addr, 1UL << 47); + EXPECT_LT((unsigned long)mmap_addresses.on_56_addr, 1UL << 56); +#endif +} + +TEST(infinite_rlimit) +{ +// Only works on 64 bit +#if __riscv_xlen == 64 + struct addresses mmap_addresses; + struct rlimit rlim_new = { .rlim_cur = RLIM_INFINITY, + .rlim_max = RLIM_INFINITY }; + + setrlimit(RLIMIT_STACK, &rlim_new); + + do_mmaps(&mmap_addresses); + + EXPECT_NE(mmap_addresses.no_hint, MAP_FAILED); + EXPECT_NE(mmap_addresses.on_37_addr, MAP_FAILED); + EXPECT_NE(mmap_addresses.on_38_addr, MAP_FAILED); + EXPECT_NE(mmap_addresses.on_46_addr, MAP_FAILED); + EXPECT_NE(mmap_addresses.on_47_addr, MAP_FAILED); + EXPECT_NE(mmap_addresses.on_55_addr, MAP_FAILED); + EXPECT_NE(mmap_addresses.on_56_addr, MAP_FAILED); + + EXPECT_LT((unsigned long)mmap_addresses.no_hint, 1UL << 47); + EXPECT_LT((unsigned long)mmap_addresses.on_37_addr, 1UL << 38); + EXPECT_LT((unsigned long)mmap_addresses.on_38_addr, 1UL << 38); + EXPECT_LT((unsigned long)mmap_addresses.on_46_addr, 1UL << 38); + EXPECT_LT((unsigned long)mmap_addresses.on_47_addr, 1UL << 47); + EXPECT_LT((unsigned long)mmap_addresses.on_55_addr, 1UL << 47); + EXPECT_LT((unsigned long)mmap_addresses.on_56_addr, 1UL << 56); +#endif +} + +TEST_HARNESS_MAIN
sv57 is supported in the kernel so pgtable.h should reflect that.
Signed-off-by: Charlie Jenkins charlie@rivosinc.com --- arch/riscv/include/asm/pgtable.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h index e13f5872bfe9..28660bab754c 100644 --- a/arch/riscv/include/asm/pgtable.h +++ b/arch/riscv/include/asm/pgtable.h @@ -840,14 +840,16 @@ static inline pte_t pte_swp_clear_exclusive(pte_t pte) * Task size is 0x4000000000 for RV64 or 0x9fc00000 for RV32. * Note that PGDIR_SIZE must evenly divide TASK_SIZE. * Task size is: - * - 0x9fc00000 (~2.5GB) for RV32. - * - 0x4000000000 ( 256GB) for RV64 using SV39 mmu - * - 0x800000000000 ( 128TB) for RV64 using SV48 mmu + * - 0x9fc00000 (~2.5GB) for RV32. + * - 0x4000000000 ( 256GB) for RV64 using SV39 mmu + * - 0x800000000000 ( 128TB) for RV64 using SV48 mmu + * - 0x100000000000000 ( 64PB) for RV64 using SV57 mmu * * Note that PGDIR_SIZE must evenly divide TASK_SIZE since "RISC-V * Instruction Set Manual Volume II: Privileged Architecture" states that * "load and store effective addresses, which are 64bits, must have bits * 63–48 all equal to bit 47, or else a page-fault exception will occur." + * Similarly for SV57, bits 63–57 must be equal to bit 56. */ #ifdef CONFIG_64BIT #define TASK_SIZE_64 (PGDIR_SIZE * PTRS_PER_PGD / 2)
The behavior of mmap is modified with this patch series, so explain the changes to the mmap hint address behavior.
Signed-off-by: Charlie Jenkins charlie@rivosinc.com --- Documentation/riscv/vm-layout.rst | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
diff --git a/Documentation/riscv/vm-layout.rst b/Documentation/riscv/vm-layout.rst index 5462c84f4723..892412b91300 100644 --- a/Documentation/riscv/vm-layout.rst +++ b/Documentation/riscv/vm-layout.rst @@ -133,3 +133,25 @@ RISC-V Linux Kernel SV57 ffffffff00000000 | -4 GB | ffffffff7fffffff | 2 GB | modules, BPF ffffffff80000000 | -2 GB | ffffffffffffffff | 2 GB | kernel __________________|____________|__________________|_________|____________________________________________________________ + + +Userspace VAs +-------------------- +To maintain compatibility with software that relies on the VA space with a +maximum of 48 bits the kernel will, by default, return virtual addresses to +userspace from a 48-bit range (sv48). This default behavior is achieved by +passing 0 into the hint address parameter of mmap. On CPUs with an address space +smaller than sv48, the CPU maximum supported address space will be the default. + +Software can "opt-in" to receiving VAs from another VA space by providing +a hint address to mmap. A call to mmap is guaranteed to return an address +that will not override the unset left-aligned bits in the hint address, +unless there is no space left in the address space. If there is no space +available in the requested address space, an address in the next smallest +available address space will be returned. + +For example, in order to obtain 48-bit VA space, a hint address greater than +:code:`1 << 38` must be provided. Note that this is 38 due to sv39 userspace +ending at :code:`1 << 38` and the addresses beyond this are reserved for the +kernel. Similarly, to obtain 57-bit VA space addresses, a hint address greater +than or equal to :code:`1 << 47` must be provided.
On Thu, Jul 13, 2023 at 05:13:59PM -0700, Charlie Jenkins wrote:
Make sv48 the default address space for mmap as some applications currently depend on this assumption. Users can now select a desired address space using a non-zero hint address to mmap. Previously, requesting the default address space from mmap by passing zero as the hint address would result in using the largest address space possible. Some applications depend on empty bits in the virtual address space, like Go and Java, so this patch provides more flexibility for application developers.
The patchwork automation failed to apply this, what is the base for the series?
-Charlie
v5:
- Minor wording change in documentation
- Change some parenthesis in arch_get_mmap_ macros
- Added case for addr==0 in arch_get_mmap_ because without this, programs would crash if RLIMIT_STACK was modified before executing the program. This was tested using the libhugetlbfs tests.
v4:
- Split testcases/document patch into test cases, in-code documentation, and formal documentation patches
- Modified the mmap_base macro to be more legible and better represent memory layout
- Fixed documentation to better reflect the implmentation
- Renamed DEFAULT_VA_BITS to MMAP_VA_BITS
- Added additional test case for rlimit changes
Charlie Jenkins (4): RISC-V: mm: Restrict address space for sv39,sv48,sv57 RISC-V: mm: Add tests for RISC-V mm RISC-V: mm: Update pgtable comment documentation RISC-V: mm: Document mmap changes
Documentation/riscv/vm-layout.rst | 22 +++ arch/riscv/include/asm/elf.h | 2 +- arch/riscv/include/asm/pgtable.h | 20 ++- arch/riscv/include/asm/processor.h | 46 +++++- tools/testing/selftests/riscv/Makefile | 2 +- tools/testing/selftests/riscv/mm/.gitignore | 1 + tools/testing/selftests/riscv/mm/Makefile | 21 +++ .../selftests/riscv/mm/testcases/mmap.c | 133 ++++++++++++++++++ 8 files changed, 234 insertions(+), 13 deletions(-) create mode 100644 tools/testing/selftests/riscv/mm/.gitignore create mode 100644 tools/testing/selftests/riscv/mm/Makefile create mode 100644 tools/testing/selftests/riscv/mm/testcases/mmap.c
-- 2.41.0
On Fri, Jul 14, 2023 at 12:17:00PM +0100, Conor Dooley wrote:
On Thu, Jul 13, 2023 at 05:13:59PM -0700, Charlie Jenkins wrote:
Make sv48 the default address space for mmap as some applications currently depend on this assumption. Users can now select a desired address space using a non-zero hint address to mmap. Previously, requesting the default address space from mmap by passing zero as the hint address would result in using the largest address space possible. Some applications depend on empty bits in the virtual address space, like Go and Java, so this patch provides more flexibility for application developers.
The patchwork automation failed to apply this, what is the base for the series?
I forgot to pull in the changes to the riscv selftests so the conflict is in that Makefile. I will send out a v6 with the correct base.
-Charlie
v5:
- Minor wording change in documentation
- Change some parenthesis in arch_get_mmap_ macros
- Added case for addr==0 in arch_get_mmap_ because without this, programs would crash if RLIMIT_STACK was modified before executing the program. This was tested using the libhugetlbfs tests.
v4:
- Split testcases/document patch into test cases, in-code documentation, and formal documentation patches
- Modified the mmap_base macro to be more legible and better represent memory layout
- Fixed documentation to better reflect the implmentation
- Renamed DEFAULT_VA_BITS to MMAP_VA_BITS
- Added additional test case for rlimit changes
Charlie Jenkins (4): RISC-V: mm: Restrict address space for sv39,sv48,sv57 RISC-V: mm: Add tests for RISC-V mm RISC-V: mm: Update pgtable comment documentation RISC-V: mm: Document mmap changes
Documentation/riscv/vm-layout.rst | 22 +++ arch/riscv/include/asm/elf.h | 2 +- arch/riscv/include/asm/pgtable.h | 20 ++- arch/riscv/include/asm/processor.h | 46 +++++- tools/testing/selftests/riscv/Makefile | 2 +- tools/testing/selftests/riscv/mm/.gitignore | 1 + tools/testing/selftests/riscv/mm/Makefile | 21 +++ .../selftests/riscv/mm/testcases/mmap.c | 133 ++++++++++++++++++ 8 files changed, 234 insertions(+), 13 deletions(-) create mode 100644 tools/testing/selftests/riscv/mm/.gitignore create mode 100644 tools/testing/selftests/riscv/mm/Makefile create mode 100644 tools/testing/selftests/riscv/mm/testcases/mmap.c
-- 2.41.0
On Fri, Jul 14, 2023 at 09:36:45AM -0700, Charlie Jenkins wrote:
On Fri, Jul 14, 2023 at 12:17:00PM +0100, Conor Dooley wrote:
On Thu, Jul 13, 2023 at 05:13:59PM -0700, Charlie Jenkins wrote:
Make sv48 the default address space for mmap as some applications currently depend on this assumption. Users can now select a desired address space using a non-zero hint address to mmap. Previously, requesting the default address space from mmap by passing zero as the hint address would result in using the largest address space possible. Some applications depend on empty bits in the virtual address space, like Go and Java, so this patch provides more flexibility for application developers.
The patchwork automation failed to apply this, what is the base for the series?
I forgot to pull in the changes to the riscv selftests so the conflict is in that Makefile. I will send out a v6 with the correct base.
If you don't actually _depend_ on the content of those changes to the self tests, then just submit on top of v6.5-rc1 & Palmer can sort out the conflicts.
linux-kselftest-mirror@lists.linaro.org
-
Charlie Jenkins -
Conor Dooley