From: Xu Kuohai xukuohai@huawei.com
This patchset fixes a umin > umax reg bound error and adds cases for it.
v2: 1. add bound check to avoid min > max 2. update 32-bit reg min/max when 64-bit reg value is a constant 3. add Fixes tag
v1: https://lore.kernel.org/bpf/20230307220449.2933650-1-xukuohai@huaweicloud.co...
Xu Kuohai (2): bpf: Fix a umin > umax reg bound error selftests/bpf: check bounds not in the 32-bit range
kernel/bpf/verifier.c | 143 ++++++++++++------ tools/testing/selftests/bpf/verifier/bounds.c | 121 +++++++++++++++ 2 files changed, 214 insertions(+), 50 deletions(-)
From: Xu Kuohai xukuohai@huawei.com
After commit 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking"), the following bpf prog is rejected:
0: (61) r2 = *(u32 *)(r1 +0) ; R2_w=pkt(off=0,r=0,imm=0) 1: (61) r3 = *(u32 *)(r1 +4) ; R3_w=pkt_end(off=0,imm=0) 2: (bf) r1 = r2 3: (07) r1 += 1 4: (2d) if r1 > r3 goto pc+8 5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff)) 6: (18) r0 = 0x7fffffffffffff10 8: (0f) r1 += r0 ; R1_w=scalar(umin=0x7fffffffffffff10,umax=0x800000000000000f) 9: (18) r0 = 0x8000000000000000 11: (07) r0 += 1 12: (ad) if r0 < r1 goto pc-2 13: (b7) r0 = 0 14: (95) exit
And the verifier log says:
[...]
from 12 to 11: R0_w=-9223372036854775794 R1=scalar(umin=9223372036854775823,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 11: (07) r0 += 1 ; R0_w=-9223372036854775793 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775793 R1=scalar(umin=9223372036854775823,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 13: safe
from 12 to 11: R0_w=-9223372036854775793 R1=scalar(umin=9223372036854775824,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 11: (07) r0 += 1 ; R0_w=-9223372036854775792 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775792 R1=scalar(umin=9223372036854775824,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 13: safe
[...]
What can be seen here is that r1->umin grows blindly and becomes bigger than r1->umax. The reason is because the loop does not terminate, when r0 increases to r1->umax_value, the following code in reg_set_min_max() sets r1->umin_value to r1->umax_value + 1 blindly:
case BPF_JGT: { if (is_jmp32) { [...] } else { u64 false_umax = opcode == BPF_JGT ? val : val - 1; u64 true_umin = opcode == BPF_JGT ? val + 1 : val;
false_reg->umax_value = min(false_reg->umax_value, false_umax); true_reg->umin_value = max(true_reg->umin_value, true_umin); } break; }
Why the loop does not terminate is because tnum_is_const(src_reg->var_off) always returns false, causing is_branch_taken() to be skipped:
if (src_reg->type == SCALAR_VALUE && !is_jmp32 && tnum_is_const(src_reg->var_off)) { pred = is_branch_taken(dst_reg, // could not reach here src_reg->var_off.value, opcode, is_jmp32); }
Why tnum_is_const(src_reg->var_off) always returns false is because r1->umin_value starts increasing from 0x7fffffffffffff10, always bigger than U32_MAX, causing the __reg_combine_64_into_32() to mark the lower 32 bits unbounded, i.e. not a constant.
To fix it: 1. avoid increasing reg lower bound to a value bigger than the upper bound, or decreasing reg upper bound to a value smaller than the lower bound. 2. set 32-bit min/max values to the lower 32 bits of the 64-bit min/max values when the 64-bit min/max values are equal.
Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Signed-off-by: Xu Kuohai xukuohai@huawei.com --- kernel/bpf/verifier.c | 143 +++++++++++++++++++++++++++--------------- 1 file changed, 93 insertions(+), 50 deletions(-)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 2bbd89279070..b775b50353d6 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -2223,14 +2223,21 @@ static bool __reg64_bound_u32(u64 a)
static void __reg_combine_64_into_32(struct bpf_reg_state *reg) { + s64 smin = reg->smin_value; + s64 smax = reg->smax_value; + u64 umin = reg->umin_value; + u64 umax = reg->umax_value; + __mark_reg32_unbounded(reg); - if (__reg64_bound_s32(reg->smin_value) && __reg64_bound_s32(reg->smax_value)) { - reg->s32_min_value = (s32)reg->smin_value; - reg->s32_max_value = (s32)reg->smax_value; + if ((__reg64_bound_s32(smin) && __reg64_bound_s32(smax)) || + smin == smax) { + reg->s32_min_value = (s32)smin; + reg->s32_max_value = (s32)smax; } - if (__reg64_bound_u32(reg->umin_value) && __reg64_bound_u32(reg->umax_value)) { - reg->u32_min_value = (u32)reg->umin_value; - reg->u32_max_value = (u32)reg->umax_value; + if ((__reg64_bound_u32(umin) && __reg64_bound_u32(umax)) || + umin == umax) { + reg->u32_min_value = (u32)umin; + reg->u32_max_value = (u32)umax; } reg_bounds_sync(reg); } @@ -12828,6 +12835,62 @@ static int is_pkt_ptr_branch_taken(struct bpf_reg_state *dst_reg, return -1; }
+static void reg_inc_u32_min(struct bpf_reg_state *reg, u32 val) +{ + reg->u32_min_value = max(reg->u32_min_value, val); + if (reg->u32_min_value > reg->u32_max_value) + reg->u32_min_value = reg->u32_max_value; +} + +static void reg_dec_u32_max(struct bpf_reg_state *reg, u32 val) +{ + reg->u32_max_value = min(reg->u32_max_value, val); + if (reg->u32_max_value < reg->u32_min_value) + reg->u32_max_value = reg->u32_min_value; +} + +static void reg_inc_s32_min(struct bpf_reg_state *reg, s32 val) +{ + reg->s32_min_value = max(reg->s32_min_value, val); + if (reg->s32_min_value > reg->s32_max_value) + reg->s32_min_value = reg->s32_max_value; +} + +static void reg_dec_s32_max(struct bpf_reg_state *reg, s32 val) +{ + reg->s32_max_value = min(reg->s32_max_value, val); + if (reg->s32_max_value < reg->s32_min_value) + reg->s32_max_value = reg->s32_min_value; +} + +static void reg_inc_u64_min(struct bpf_reg_state *reg, u64 val) +{ + reg->umin_value = max(reg->umin_value, val); + if (reg->umin_value > reg->umax_value) + reg->umin_value = reg->umax_value; +} + +static void reg_dec_u64_max(struct bpf_reg_state *reg, u64 val) +{ + reg->umax_value = min(reg->umax_value, val); + if (reg->umax_value < reg->umin_value) + reg->umax_value = reg->umin_value; +} + +static void reg_inc_s64_min(struct bpf_reg_state *reg, s64 val) +{ + reg->smin_value = max(reg->smin_value, val); + if (reg->smin_value > reg->smax_value) + reg->smin_value = reg->smax_value; +} + +static void reg_dec_s64_max(struct bpf_reg_state *reg, s64 val) +{ + reg->smax_value = min(reg->smax_value, val); + if (reg->smax_value < reg->smin_value) + reg->smax_value = reg->smin_value; +} + /* Adjusts the register min/max values in the case that the dst_reg is the * variable register that we are working on, and src_reg is a constant or we're * simply doing a BPF_K check. @@ -12898,76 +12961,56 @@ static void reg_set_min_max(struct bpf_reg_state *true_reg, case BPF_JGE: case BPF_JGT: { - if (is_jmp32) { - u32 false_umax = opcode == BPF_JGT ? val32 : val32 - 1; - u32 true_umin = opcode == BPF_JGT ? val32 + 1 : val32; + bool neq = (opcode == BPF_JGT);
- false_reg->u32_max_value = min(false_reg->u32_max_value, - false_umax); - true_reg->u32_min_value = max(true_reg->u32_min_value, - true_umin); + if (is_jmp32) { + reg_dec_u32_max(false_reg, neq ? val32 : val32 - 1); + reg_inc_u32_min(true_reg, neq ? val32 + 1 : val32); } else { - u64 false_umax = opcode == BPF_JGT ? val : val - 1; - u64 true_umin = opcode == BPF_JGT ? val + 1 : val; - - false_reg->umax_value = min(false_reg->umax_value, false_umax); - true_reg->umin_value = max(true_reg->umin_value, true_umin); + reg_dec_u64_max(false_reg, neq ? val : val - 1); + reg_inc_u64_min(true_reg, neq ? val + 1 : val); } break; } case BPF_JSGE: case BPF_JSGT: { - if (is_jmp32) { - s32 false_smax = opcode == BPF_JSGT ? sval32 : sval32 - 1; - s32 true_smin = opcode == BPF_JSGT ? sval32 + 1 : sval32; + bool neq = (opcode == BPF_JSGT);
- false_reg->s32_max_value = min(false_reg->s32_max_value, false_smax); - true_reg->s32_min_value = max(true_reg->s32_min_value, true_smin); + if (is_jmp32) { + reg_dec_s32_max(false_reg, neq ? sval32 : sval32 - 1); + reg_inc_s32_min(true_reg, neq ? sval32 + 1 : sval32); } else { - s64 false_smax = opcode == BPF_JSGT ? sval : sval - 1; - s64 true_smin = opcode == BPF_JSGT ? sval + 1 : sval; - - false_reg->smax_value = min(false_reg->smax_value, false_smax); - true_reg->smin_value = max(true_reg->smin_value, true_smin); + reg_dec_s64_max(false_reg, neq ? sval : sval - 1); + reg_inc_s64_min(true_reg, neq ? sval + 1 : sval); } break; } case BPF_JLE: case BPF_JLT: { - if (is_jmp32) { - u32 false_umin = opcode == BPF_JLT ? val32 : val32 + 1; - u32 true_umax = opcode == BPF_JLT ? val32 - 1 : val32; + bool neq = (opcode == BPF_JLT);
- false_reg->u32_min_value = max(false_reg->u32_min_value, - false_umin); - true_reg->u32_max_value = min(true_reg->u32_max_value, - true_umax); + if (is_jmp32) { + reg_inc_u32_min(false_reg, neq ? val32 : val32 + 1); + reg_dec_u32_max(true_reg, neq ? val32 - 1 : val32); } else { - u64 false_umin = opcode == BPF_JLT ? val : val + 1; - u64 true_umax = opcode == BPF_JLT ? val - 1 : val; - - false_reg->umin_value = max(false_reg->umin_value, false_umin); - true_reg->umax_value = min(true_reg->umax_value, true_umax); + reg_inc_u64_min(false_reg, neq ? val : val + 1); + reg_dec_u64_max(true_reg, neq ? val - 1 : val); } break; } case BPF_JSLE: case BPF_JSLT: { - if (is_jmp32) { - s32 false_smin = opcode == BPF_JSLT ? sval32 : sval32 + 1; - s32 true_smax = opcode == BPF_JSLT ? sval32 - 1 : sval32; + bool neq = (opcode == BPF_JSLT);
- false_reg->s32_min_value = max(false_reg->s32_min_value, false_smin); - true_reg->s32_max_value = min(true_reg->s32_max_value, true_smax); + if (is_jmp32) { + reg_inc_s32_min(false_reg, neq ? sval32 : sval32 + 1); + reg_dec_s32_max(true_reg, neq ? sval32 - 1 : sval32); } else { - s64 false_smin = opcode == BPF_JSLT ? sval : sval + 1; - s64 true_smax = opcode == BPF_JSLT ? sval - 1 : sval; - - false_reg->smin_value = max(false_reg->smin_value, false_smin); - true_reg->smax_value = min(true_reg->smax_value, true_smax); + reg_inc_s64_min(false_reg, neq ? sval : sval + 1); + reg_dec_s64_max(true_reg, neq ? sval - 1 : sval); } break; }
On 3/14/23 9:34 PM, Xu Kuohai wrote:
From: Xu Kuohai xukuohai@huawei.com
After commit 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking"), the following bpf prog is rejected:
0: (61) r2 = *(u32 *)(r1 +0) ; R2_w=pkt(off=0,r=0,imm=0) 1: (61) r3 = *(u32 *)(r1 +4) ; R3_w=pkt_end(off=0,imm=0) 2: (bf) r1 = r2 3: (07) r1 += 1 4: (2d) if r1 > r3 goto pc+8 5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff)) 6: (18) r0 = 0x7fffffffffffff10 8: (0f) r1 += r0 ; R1_w=scalar(umin=0x7fffffffffffff10,umax=0x800000000000000f) 9: (18) r0 = 0x8000000000000000 11: (07) r0 += 1 12: (ad) if r0 < r1 goto pc-2 13: (b7) r0 = 0 14: (95) exit
And the verifier log says:
[...]
from 12 to 11: R0_w=-9223372036854775794 R1=scalar(umin=9223372036854775823,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 11: (07) r0 += 1 ; R0_w=-9223372036854775793 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775793 R1=scalar(umin=9223372036854775823,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 13: safe
from 12 to 11: R0_w=-9223372036854775793 R1=scalar(umin=9223372036854775824,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 11: (07) r0 += 1 ; R0_w=-9223372036854775792 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775792 R1=scalar(umin=9223372036854775824,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 13: safe
[...]
What can be seen here is that r1->umin grows blindly and becomes bigger than r1->umax. The reason is because the loop does not terminate, when r0 increases to r1->umax_value, the following code in reg_set_min_max() sets r1->umin_value to r1->umax_value + 1 blindly:
case BPF_JGT: { if (is_jmp32) { [...] } else { u64 false_umax = opcode == BPF_JGT ? val : val - 1; u64 true_umin = opcode == BPF_JGT ? val + 1 : val;
false_reg->umax_value = min(false_reg->umax_value, false_umax); true_reg->umin_value = max(true_reg->umin_value, true_umin); } break;}
Why the loop does not terminate is because tnum_is_const(src_reg->var_off) always returns false, causing is_branch_taken() to be skipped:
if (src_reg->type == SCALAR_VALUE && !is_jmp32 && tnum_is_const(src_reg->var_off)) { pred = is_branch_taken(dst_reg, // could not reach here src_reg->var_off.value, opcode, is_jmp32); }
Why tnum_is_const(src_reg->var_off) always returns false is because r1->umin_value starts increasing from 0x7fffffffffffff10, always bigger than U32_MAX, causing the __reg_combine_64_into_32() to mark the lower 32 bits unbounded, i.e. not a constant.
To fix it:
- avoid increasing reg lower bound to a value bigger than the upper bound, or decreasing reg upper bound to a value smaller than the lower bound.
- set 32-bit min/max values to the lower 32 bits of the 64-bit min/max values when the 64-bit min/max values are equal.
Should both these be separate patches, meaning are both of them strictly required as one logical entity or not? From your description it's not really clear wrt reg_{inc,dec}_{u32,u64}_{min,max} and if this is mainly defensive or required.
Also, while you describe to some degree how we get here, there is no analysis on why your proposed changes are safe. If you want to make the verifier less conservative to start accepting such progs, can you then elaborate on the latter?
Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Signed-off-by: Xu Kuohai xukuohai@huawei.com
kernel/bpf/verifier.c | 143 +++++++++++++++++++++++++++--------------- 1 file changed, 93 insertions(+), 50 deletions(-)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 2bbd89279070..b775b50353d6 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -2223,14 +2223,21 @@ static bool __reg64_bound_u32(u64 a) static void __reg_combine_64_into_32(struct bpf_reg_state *reg) {
- s64 smin = reg->smin_value;
- s64 smax = reg->smax_value;
- u64 umin = reg->umin_value;
- u64 umax = reg->umax_value;
- __mark_reg32_unbounded(reg);
- if (__reg64_bound_s32(reg->smin_value) && __reg64_bound_s32(reg->smax_value)) {
reg->s32_min_value = (s32)reg->smin_value;reg->s32_max_value = (s32)reg->smax_value;
- if ((__reg64_bound_s32(smin) && __reg64_bound_s32(smax)) ||
smin == smax) {
Did you look into debugging reg_bounds_sync()? Assumption for constant register is register_is_const() and it's explicitly looking at var_off.
reg->s32_min_value = (s32)smin;reg->s32_max_value = (s32)smax;
- if (__reg64_bound_u32(reg->umin_value) && __reg64_bound_u32(reg->umax_value)) {
reg->u32_min_value = (u32)reg->umin_value;reg->u32_max_value = (u32)reg->umax_value;
- if ((__reg64_bound_u32(umin) && __reg64_bound_u32(umax)) ||
umin == umax) {reg->u32_min_value = (u32)umin;reg->u32_max_value = (u32)umax;@@ -12828,6 +12835,62 @@ static int is_pkt_ptr_branch_taken(struct bpf_reg_state *dst_reg, return -1; } +static void reg_inc_u32_min(struct bpf_reg_state *reg, u32 val) +{
- reg->u32_min_value = max(reg->u32_min_value, val);
- if (reg->u32_min_value > reg->u32_max_value)
reg->u32_min_value = reg->u32_max_value;+}
+static void reg_dec_u32_max(struct bpf_reg_state *reg, u32 val) +{
- reg->u32_max_value = min(reg->u32_max_value, val);
- if (reg->u32_max_value < reg->u32_min_value)
reg->u32_max_value = reg->u32_min_value;+}
+static void reg_inc_s32_min(struct bpf_reg_state *reg, s32 val) +{
- reg->s32_min_value = max(reg->s32_min_value, val);
- if (reg->s32_min_value > reg->s32_max_value)
reg->s32_min_value = reg->s32_max_value;+}
+static void reg_dec_s32_max(struct bpf_reg_state *reg, s32 val) +{
- reg->s32_max_value = min(reg->s32_max_value, val);
- if (reg->s32_max_value < reg->s32_min_value)
reg->s32_max_value = reg->s32_min_value;+}
+static void reg_inc_u64_min(struct bpf_reg_state *reg, u64 val) +{
- reg->umin_value = max(reg->umin_value, val);
- if (reg->umin_value > reg->umax_value)
reg->umin_value = reg->umax_value;+}
+static void reg_dec_u64_max(struct bpf_reg_state *reg, u64 val) +{
- reg->umax_value = min(reg->umax_value, val);
- if (reg->umax_value < reg->umin_value)
reg->umax_value = reg->umin_value;+}
+static void reg_inc_s64_min(struct bpf_reg_state *reg, s64 val) +{
- reg->smin_value = max(reg->smin_value, val);
- if (reg->smin_value > reg->smax_value)
reg->smin_value = reg->smax_value;+}
+static void reg_dec_s64_max(struct bpf_reg_state *reg, s64 val) +{
- reg->smax_value = min(reg->smax_value, val);
- if (reg->smax_value < reg->smin_value)
reg->smax_value = reg->smin_value;+}
All this feels more like a workaround and papering over the issue.
/* Adjusts the register min/max values in the case that the dst_reg is the
- variable register that we are working on, and src_reg is a constant or we're
- simply doing a BPF_K check.
@@ -12898,76 +12961,56 @@ static void reg_set_min_max(struct bpf_reg_state *true_reg, case BPF_JGE: case BPF_JGT: {
if (is_jmp32) {u32 false_umax = opcode == BPF_JGT ? val32 : val32 - 1;u32 true_umin = opcode == BPF_JGT ? val32 + 1 : val32;
bool neq = (opcode == BPF_JGT);
false_reg->u32_max_value = min(false_reg->u32_max_value,false_umax);true_reg->u32_min_value = max(true_reg->u32_min_value,true_umin);
if (is_jmp32) {reg_dec_u32_max(false_reg, neq ? val32 : val32 - 1);reg_inc_u32_min(true_reg, neq ? val32 + 1 : val32);
u64 false_umax = opcode == BPF_JGT ? val : val - 1;u64 true_umin = opcode == BPF_JGT ? val + 1 : val;false_reg->umax_value = min(false_reg->umax_value, false_umax);true_reg->umin_value = max(true_reg->umin_value, true_umin);
reg_dec_u64_max(false_reg, neq ? val : val - 1);reg_inc_u64_min(true_reg, neq ? val + 1 : val);
On 3/17/23 11:24 PM, Daniel Borkmann wrote:
On 3/14/23 9:34 PM, Xu Kuohai wrote:
From: Xu Kuohai xukuohai@huawei.com
After commit 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking"), the following bpf prog is rejected:
0: (61) r2 = *(u32 *)(r1 +0) ; R2_w=pkt(off=0,r=0,imm=0) 1: (61) r3 = *(u32 *)(r1 +4) ; R3_w=pkt_end(off=0,imm=0) 2: (bf) r1 = r2 3: (07) r1 += 1 4: (2d) if r1 > r3 goto pc+8 5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff)) 6: (18) r0 = 0x7fffffffffffff10 8: (0f) r1 += r0 ; R1_w=scalar(umin=0x7fffffffffffff10,umax=0x800000000000000f) 9: (18) r0 = 0x8000000000000000 11: (07) r0 += 1 12: (ad) if r0 < r1 goto pc-2 13: (b7) r0 = 0 14: (95) exit
And the verifier log says:
[...]
from 12 to 11: R0_w=-9223372036854775794 R1=scalar(umin=9223372036854775823,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 11: (07) r0 += 1 ; R0_w=-9223372036854775793 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775793 R1=scalar(umin=9223372036854775823,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 13: safe
from 12 to 11: R0_w=-9223372036854775793 R1=scalar(umin=9223372036854775824,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 11: (07) r0 += 1 ; R0_w=-9223372036854775792 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775792 R1=scalar(umin=9223372036854775824,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 13: safe
[...]
What can be seen here is that r1->umin grows blindly and becomes bigger than r1->umax. The reason is because the loop does not terminate, when r0 increases to r1->umax_value, the following code in reg_set_min_max() sets r1->umin_value to r1->umax_value + 1 blindly:
case BPF_JGT: { if (is_jmp32) { [...] } else { u64 false_umax = opcode == BPF_JGT ? val : val - 1; u64 true_umin = opcode == BPF_JGT ? val + 1 : val;
false_reg->umax_value = min(false_reg->umax_value, false_umax); true_reg->umin_value = max(true_reg->umin_value, true_umin); } break; }
Why the loop does not terminate is because tnum_is_const(src_reg->var_off) always returns false, causing is_branch_taken() to be skipped:
if (src_reg->type == SCALAR_VALUE && !is_jmp32 && tnum_is_const(src_reg->var_off)) { pred = is_branch_taken(dst_reg, // could not reach here src_reg->var_off.value, opcode, is_jmp32); }
Why tnum_is_const(src_reg->var_off) always returns false is because r1->umin_value starts increasing from 0x7fffffffffffff10, always bigger than U32_MAX, causing the __reg_combine_64_into_32() to mark the lower 32 bits unbounded, i.e. not a constant.
To fix it:
- avoid increasing reg lower bound to a value bigger than the upper bound,
or decreasing reg upper bound to a value smaller than the lower bound. 2. set 32-bit min/max values to the lower 32 bits of the 64-bit min/max values when the 64-bit min/max values are equal.
Should both these be separate patches, meaning are both of them strictly required as one logical entity or not? From your description it's not really clear wrt reg_{inc,dec}_{u32,u64}_{min,max} and if this is mainly defensive or required.
Fyi, I'm working on the below draft patch which passes all of test_verifier and your test cases as well from patch 2. Will cook a proper patch once I'm through with further analysis:
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index d517d13878cf..8bef2ed89e87 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -1823,7 +1823,7 @@ static void __reg_bound_offset(struct bpf_reg_state *reg) struct tnum var64_off = tnum_intersect(reg->var_off, tnum_range(reg->umin_value, reg->umax_value)); - struct tnum var32_off = tnum_intersect(tnum_subreg(reg->var_off), + struct tnum var32_off = tnum_intersect(tnum_subreg(var64_off), tnum_range(reg->u32_min_value, reg->u32_max_value));
On 3/21/2023 12:42 AM, Daniel Borkmann wrote:
On 3/17/23 11:24 PM, Daniel Borkmann wrote:
On 3/14/23 9:34 PM, Xu Kuohai wrote:
From: Xu Kuohai xukuohai@huawei.com
After commit 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking"), the following bpf prog is rejected:
0: (61) r2 = *(u32 *)(r1 +0) ; R2_w=pkt(off=0,r=0,imm=0) 1: (61) r3 = *(u32 *)(r1 +4) ; R3_w=pkt_end(off=0,imm=0) 2: (bf) r1 = r2 3: (07) r1 += 1 4: (2d) if r1 > r3 goto pc+8 5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff)) 6: (18) r0 = 0x7fffffffffffff10 8: (0f) r1 += r0 ; R1_w=scalar(umin=0x7fffffffffffff10,umax=0x800000000000000f) 9: (18) r0 = 0x8000000000000000 11: (07) r0 += 1 12: (ad) if r0 < r1 goto pc-2 13: (b7) r0 = 0 14: (95) exit
And the verifier log says:
[...]
from 12 to 11: R0_w=-9223372036854775794 R1=scalar(umin=9223372036854775823,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 11: (07) r0 += 1 ; R0_w=-9223372036854775793 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775793 R1=scalar(umin=9223372036854775823,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 13: safe
from 12 to 11: R0_w=-9223372036854775793 R1=scalar(umin=9223372036854775824,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 11: (07) r0 += 1 ; R0_w=-9223372036854775792 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775792 R1=scalar(umin=9223372036854775824,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 13: safe
[...]
What can be seen here is that r1->umin grows blindly and becomes bigger than r1->umax. The reason is because the loop does not terminate, when r0 increases to r1->umax_value, the following code in reg_set_min_max() sets r1->umin_value to r1->umax_value + 1 blindly:
case BPF_JGT: { if (is_jmp32) { [...] } else { u64 false_umax = opcode == BPF_JGT ? val : val - 1; u64 true_umin = opcode == BPF_JGT ? val + 1 : val;
false_reg->umax_value = min(false_reg->umax_value, false_umax); true_reg->umin_value = max(true_reg->umin_value, true_umin); } break; }
Why the loop does not terminate is because tnum_is_const(src_reg->var_off) always returns false, causing is_branch_taken() to be skipped:
if (src_reg->type == SCALAR_VALUE && !is_jmp32 && tnum_is_const(src_reg->var_off)) { pred = is_branch_taken(dst_reg, // could not reach here src_reg->var_off.value, opcode, is_jmp32); }
Why tnum_is_const(src_reg->var_off) always returns false is because r1->umin_value starts increasing from 0x7fffffffffffff10, always bigger than U32_MAX, causing the __reg_combine_64_into_32() to mark the lower 32 bits unbounded, i.e. not a constant.
To fix it:
- avoid increasing reg lower bound to a value bigger than the upper bound,
or decreasing reg upper bound to a value smaller than the lower bound. 2. set 32-bit min/max values to the lower 32 bits of the 64-bit min/max values when the 64-bit min/max values are equal.
Should both these be separate patches, meaning are both of them strictly required as one logical entity or not? From your description it's not really clear wrt reg_{inc,dec}_{u32,u64}_{min,max} and if this is mainly defensive or required.
Fyi, I'm working on the below draft patch which passes all of test_verifier and your test cases as well from patch 2. Will cook a proper patch once I'm through with further analysis:
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index d517d13878cf..8bef2ed89e87 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -1823,7 +1823,7 @@ static void __reg_bound_offset(struct bpf_reg_state *reg) struct tnum var64_off = tnum_intersect(reg->var_off, tnum_range(reg->umin_value, reg->umax_value)); - struct tnum var32_off = tnum_intersect(tnum_subreg(reg->var_off), + struct tnum var32_off = tnum_intersect(tnum_subreg(var64_off), tnum_range(reg->u32_min_value, reg->u32_max_value)); .
[forget to reply to the list, resend]
Thanks for the patch, it works for me. But as replied in the other mail, it seems more reasonable to converge var32_off to constant by converging [u32_min_value, u32_max_value] to constant.
On 3/18/2023 6:24 AM, Daniel Borkmann wrote:
On 3/14/23 9:34 PM, Xu Kuohai wrote:
From: Xu Kuohai xukuohai@huawei.com
After commit 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking"), the following bpf prog is rejected:
0: (61) r2 = *(u32 *)(r1 +0) ; R2_w=pkt(off=0,r=0,imm=0) 1: (61) r3 = *(u32 *)(r1 +4) ; R3_w=pkt_end(off=0,imm=0) 2: (bf) r1 = r2 3: (07) r1 += 1 4: (2d) if r1 > r3 goto pc+8 5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff)) 6: (18) r0 = 0x7fffffffffffff10 8: (0f) r1 += r0 ; R1_w=scalar(umin=0x7fffffffffffff10,umax=0x800000000000000f) 9: (18) r0 = 0x8000000000000000 11: (07) r0 += 1 12: (ad) if r0 < r1 goto pc-2 13: (b7) r0 = 0 14: (95) exit
And the verifier log says:
[...]
from 12 to 11: R0_w=-9223372036854775794 R1=scalar(umin=9223372036854775823,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 11: (07) r0 += 1 ; R0_w=-9223372036854775793 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775793 R1=scalar(umin=9223372036854775823,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 13: safe
from 12 to 11: R0_w=-9223372036854775793 R1=scalar(umin=9223372036854775824,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 11: (07) r0 += 1 ; R0_w=-9223372036854775792 12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775792 R1=scalar(umin=9223372036854775824,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) 13: safe
[...]
What can be seen here is that r1->umin grows blindly and becomes bigger than r1->umax. The reason is because the loop does not terminate, when r0 increases to r1->umax_value, the following code in reg_set_min_max() sets r1->umin_value to r1->umax_value + 1 blindly:
case BPF_JGT: { if (is_jmp32) { [...] } else { u64 false_umax = opcode == BPF_JGT ? val : val - 1; u64 true_umin = opcode == BPF_JGT ? val + 1 : val;
false_reg->umax_value = min(false_reg->umax_value, false_umax); true_reg->umin_value = max(true_reg->umin_value, true_umin); } break; }
Why the loop does not terminate is because tnum_is_const(src_reg->var_off) always returns false, causing is_branch_taken() to be skipped:
if (src_reg->type == SCALAR_VALUE && !is_jmp32 && tnum_is_const(src_reg->var_off)) { pred = is_branch_taken(dst_reg, // could not reach here src_reg->var_off.value, opcode, is_jmp32); }
Why tnum_is_const(src_reg->var_off) always returns false is because r1->umin_value starts increasing from 0x7fffffffffffff10, always bigger than U32_MAX, causing the __reg_combine_64_into_32() to mark the lower 32 bits unbounded, i.e. not a constant.
To fix it:
- avoid increasing reg lower bound to a value bigger than the upper bound,
or decreasing reg upper bound to a value smaller than the lower bound. 2. set 32-bit min/max values to the lower 32 bits of the 64-bit min/max values when the 64-bit min/max values are equal.
Should both these be separate patches, meaning are both of them strictly required as one logical entity or not? From your description it's not really clear wrt reg_{inc,dec}_{u32,u64}_{min,max} and if this is mainly defensive or required.
It's defensive, not required. It was added to address "umin > umax" concerns received in v1. Maybe I misunderstood something.
Also, while you describe to some degree how we get here, there is no analysis on why your proposed changes are safe. If you want to make the verifier less conservative to start accepting such progs, can you then elaborate on the latter?
I have some discussion below and hope it makes some sense.
Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Signed-off-by: Xu Kuohai xukuohai@huawei.com
kernel/bpf/verifier.c | 143 +++++++++++++++++++++++++++--------------- 1 file changed, 93 insertions(+), 50 deletions(-)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 2bbd89279070..b775b50353d6 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -2223,14 +2223,21 @@ static bool __reg64_bound_u32(u64 a) static void __reg_combine_64_into_32(struct bpf_reg_state *reg) { + s64 smin = reg->smin_value; + s64 smax = reg->smax_value; + u64 umin = reg->umin_value; + u64 umax = reg->umax_value;
__mark_reg32_unbounded(reg); - if (__reg64_bound_s32(reg->smin_value) && __reg64_bound_s32(reg->smax_value)) { - reg->s32_min_value = (s32)reg->smin_value; - reg->s32_max_value = (s32)reg->smax_value; + if ((__reg64_bound_s32(smin) && __reg64_bound_s32(smax)) || + smin == smax) {
Did you look into debugging reg_bounds_sync()? Assumption for constant register is register_is_const() and it's explicitly looking at var_off.
I checked this function and saw that the low 32 bits and high 32 bits of var_off are updated separately, and the new low/high 32 bits are the intersection of the old low/high 32 bits and the new [u32_min, u32_max] or [umin, umax] range. So as the range [u32_min, u32_max] or [umin, umax] converges, the low/high 32 bits converge as well.
This converge process is reasonable. The lower 32 bits of var_off do not converge to constant is because the range [u32_min, u32_max] does not converge to constant.
IIUC, what _reg_combine_64_into_32 does before calling reg_bounds_sync is find the value range of y when the 64-bit variable x changes from smin to smax for function y = (s32)x, and the value range of y when x changes from umin to umax for function y = (u32)x.
So when the value range of x is a constant, the value range of y is naturally also a constant, that is, it's reasonable to infer u32_min == u32_max from the 64-bit umin == umax.
In fact, the range of y could be found from function graph directly.
1. function graph for y = (u32)x:
^ y = (u32)x | U32_MAX + _ _ | _/ | _| | | _| | _| | | _| | _| | | _| | _| | | _| | _| | | _| | _| | | _| | _| | | _| | _| | | | | | | 0 +-------------------+-------------------+----> x/u64
|<---U32_MAX + 1--->|<---U32_MAX + 1--->|
1A) if umin == umax, then u32_min = (u32)umin, u32_max = (u32)umax:
^ y = (u32)x | U32_MAX + _ _ | _/ | _| | | _| | _| | | _| | _| | u32_min == u32_max | _ _ _ _ _| | _| | | _| | _| | | _| | | _| | | _| | | _| | | _| | | _| | | | | | | | 0 +---------+---------+-------------------+----> x/u64 umin == umax
|<---U32_MAX + 1--->|<---U32_MAX + 1--->|
1B) if umax - umin <= U32_MAX and (u32)umin < (u32)umax, then u32_min = (u32)umin, u32_max = (u32)umax:
^ y = (u32)x | U32_MAX + _ _ u32_max = (u32)umax | _ _ _ _ _ _ _ _/ | _| | | _| | _| | | _| | | _| | u32_min = (u32)umin | _ _ _ _ _| | | _| | | _| | | _| | | _| | | | _| | | _| | | | _| | | _| | | | _| | | | | | | | | 0 +---------+-----+---+-------------------+----> x/u64 umin umax
|<---U32_MAX + 1--->|<---U32_MAX + 1--->|
1C) if umax - umin <= U32_MAX and (u32)umin > (u32)umax, then u32_min = U32_MIN, u32_max = U32_MAX:
^ y = (u32)x | u32_max = 32_MAX + _ _ | _/ | _| | | _| | _| | | _| | _| | (u32)umin | _ _ _ _ _| | _| | | _| | _| | | _| | | _| | (u32)umax | _ _| _ |_ _ _ _ _|_ _ _| | | _| | | _| | | | | | | | | | u32_min = U32_MIN 0 +---------+---------+-----+-------------+----> x/u64 umin umax
|<---U32_MAX + 1--->|<---U32_MAX + 1--->|
1D) if umax - umin > U32_MAX, then u32_min = U32_MIN, u32_max = U32_MAX:
^ y = (u32)x | u32_max = 32_MAX + _ _ | _/ | _| | (u32)umax | _ _ _ _ _ _ _|_ _|_ _ _ _ _ _ _ _| | | _| | _| | (u32)umin | _ _ _ _ _| | _| | | | _| | _| | | | _| | | _| | | | _| | | _| | | | _| | | _| | | | | | | | | | u32_min = U32_MIN 0 +---------+---------+-------------+-----+----> x/u64 umin umax
|<---U32_MAX + 1--->|<---U32_MAX + 1--->|
2. function graph for y = (s32)x:
^ y = (s32)x | S32_MAX | _ _ _ _ _ _ | _| | _| | | _| | _| | | _| | _| | | _| | _| | --+---------0----------+---------+----------+---> x/s64 | _| | _| | _| | | _| | _| | | _| | _| | | _| |_| _ _ _ | S32_MIN |_| | | |<--- U32_MAX + 1--->|<--- U32_MAX + 1--->|
2A) if smin == smax, then s32_min = (s32)smin, s32_max = (s32)smax:
^ y = (s32)x | S32_MAX | _ _ _ _ _ _ | _| | _| | | _| | _| | s32_min == s32_max|__ _| | _| | | _| | | _| | --+---------0----+-----+---------+----------+---> x/s64 | _| smin | _| | _| | smax | _| | _| | | _| | _| | | _| |_| _ _ _ | S32_MIN |_| | | |<--- U32_MAX + 1--->|<--- U32_MAX + 1--->|
2B) if smax - smin <= U32_MAX and (s32)smin < (s32)smax, then s32_min = (u32)smin, s32_max = (s32)smax:
^ y = (s32)x | S32_MAX | _ _ _ _ _ _ s32_max | _ _ _ _| | _| | | _| | _| | | _| | | _| | | _| | | _| | --+---+-----0------+---+---------+----------+---> x/s64 | smin _| smax | _| | | _| | | _| | |_|_ _| s32_min | _| | _| | | _| |_| _ _ _ | S32_MIN |_| | | |<--- U32_MAX + 1--->|<--- U32_MAX + 1--->|
2C) if smax - smin <= U32_MAX and (s32)smin > (s32)smax, then s32_min = S32_MIN, s32_max = S32_MAX:
^ y = (s32)x | s32_max = S32_MAX | _ _ _ _ _ _ | _| | _| | (s32)smin |_ _ _| | _| | | _| | _| | | _| | | smax _| | --+---------0----+-----+-----+---+----------+---> x/s64 | smin | | _| (s32)smax | _ _ _ _ _|_ _ _|_| | | _| | | _| s32_min = S32_MIN | _ _ _ _ _|_| | | |<--- U32_MAX + 1--->|<--- U32_MAX + 1--->|
2D) if smax - smin > U32_MAX, then s32_min = S32_MIN, s32_max = S32_MAX:
^ y = (s32)x | s32_max = S32_MAX | _ _ _ _ _ _ (s32)smax | _ _ _ _|_|_ _ _ _ _ _ _ _ _| | | _| | _| | (s32)smin | _ _| | _| | | | _| | _| | | --+---------0--+-------+---------+------+---+---> x/s64 | smin | _| smax | | _| | | _| | | _| s32_min = S32_MIN | _ _ _ _ _|_| | | |<--- U32_MAX + 1--->|<--- U32_MAX + 1--->|
+ reg->s32_min_value = (s32)smin; + reg->s32_max_value = (s32)smax; } - if (__reg64_bound_u32(reg->umin_value) && __reg64_bound_u32(reg->umax_value)) { - reg->u32_min_value = (u32)reg->umin_value; - reg->u32_max_value = (u32)reg->umax_value; + if ((__reg64_bound_u32(umin) && __reg64_bound_u32(umax)) || + umin == umax) { + reg->u32_min_value = (u32)umin; + reg->u32_max_value = (u32)umax; } reg_bounds_sync(reg); } @@ -12828,6 +12835,62 @@ static int is_pkt_ptr_branch_taken(struct bpf_reg_state *dst_reg, return -1; } +static void reg_inc_u32_min(struct bpf_reg_state *reg, u32 val) +{ + reg->u32_min_value = max(reg->u32_min_value, val); + if (reg->u32_min_value > reg->u32_max_value) + reg->u32_min_value = reg->u32_max_value; +}
+static void reg_dec_u32_max(struct bpf_reg_state *reg, u32 val) +{ + reg->u32_max_value = min(reg->u32_max_value, val); + if (reg->u32_max_value < reg->u32_min_value) + reg->u32_max_value = reg->u32_min_value; +}
+static void reg_inc_s32_min(struct bpf_reg_state *reg, s32 val) +{ + reg->s32_min_value = max(reg->s32_min_value, val); + if (reg->s32_min_value > reg->s32_max_value) + reg->s32_min_value = reg->s32_max_value; +}
+static void reg_dec_s32_max(struct bpf_reg_state *reg, s32 val) +{ + reg->s32_max_value = min(reg->s32_max_value, val); + if (reg->s32_max_value < reg->s32_min_value) + reg->s32_max_value = reg->s32_min_value; +}
+static void reg_inc_u64_min(struct bpf_reg_state *reg, u64 val) +{ + reg->umin_value = max(reg->umin_value, val); + if (reg->umin_value > reg->umax_value) + reg->umin_value = reg->umax_value; +}
+static void reg_dec_u64_max(struct bpf_reg_state *reg, u64 val) +{ + reg->umax_value = min(reg->umax_value, val); + if (reg->umax_value < reg->umin_value) + reg->umax_value = reg->umin_value; +}
+static void reg_inc_s64_min(struct bpf_reg_state *reg, s64 val) +{ + reg->smin_value = max(reg->smin_value, val); + if (reg->smin_value > reg->smax_value) + reg->smin_value = reg->smax_value; +}
+static void reg_dec_s64_max(struct bpf_reg_state *reg, s64 val) +{ + reg->smax_value = min(reg->smax_value, val); + if (reg->smax_value < reg->smin_value) + reg->smax_value = reg->smin_value; +}
All this feels more like a workaround and papering over the issue.
Agree, making umin > umax disappear from error log does not fix the issue, and may make debugging more difficult.
/* Adjusts the register min/max values in the case that the dst_reg is the * variable register that we are working on, and src_reg is a constant or we're * simply doing a BPF_K check. @@ -12898,76 +12961,56 @@ static void reg_set_min_max(struct bpf_reg_state *true_reg, case BPF_JGE: case BPF_JGT: { - if (is_jmp32) { - u32 false_umax = opcode == BPF_JGT ? val32 : val32 - 1; - u32 true_umin = opcode == BPF_JGT ? val32 + 1 : val32; + bool neq = (opcode == BPF_JGT); - false_reg->u32_max_value = min(false_reg->u32_max_value, - false_umax); - true_reg->u32_min_value = max(true_reg->u32_min_value, - true_umin); + if (is_jmp32) { + reg_dec_u32_max(false_reg, neq ? val32 : val32 - 1); + reg_inc_u32_min(true_reg, neq ? val32 + 1 : val32); } else { - u64 false_umax = opcode == BPF_JGT ? val : val - 1; - u64 true_umin = opcode == BPF_JGT ? val + 1 : val;
- false_reg->umax_value = min(false_reg->umax_value, false_umax); - true_reg->umin_value = max(true_reg->umin_value, true_umin); + reg_dec_u64_max(false_reg, neq ? val : val - 1); + reg_inc_u64_min(true_reg, neq ? val + 1 : val);
.
From: Xu Kuohai xukuohai@huawei.com
Add cases to check if bound is updated correctly when 64-bit value is not in the 32-bit range.
Signed-off-by: Xu Kuohai xukuohai@huawei.com --- tools/testing/selftests/bpf/verifier/bounds.c | 121 ++++++++++++++++++ 1 file changed, 121 insertions(+)
diff --git a/tools/testing/selftests/bpf/verifier/bounds.c b/tools/testing/selftests/bpf/verifier/bounds.c index 33125d5f6772..74b1917d4208 100644 --- a/tools/testing/selftests/bpf/verifier/bounds.c +++ b/tools/testing/selftests/bpf/verifier/bounds.c @@ -753,3 +753,124 @@ .result_unpriv = REJECT, .result = ACCEPT, }, +{ + "bound check with JMP_JLT for crossing 64-bit signed boundary", + .insns = { + BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)), + BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data_end)), + BPF_MOV64_REG(BPF_REG_1, BPF_REG_2), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 1), + BPF_JMP_REG(BPF_JGT, BPF_REG_1, BPF_REG_3, 8), + + BPF_LDX_MEM(BPF_B, BPF_REG_1, BPF_REG_2, 0), + BPF_LD_IMM64(BPF_REG_0, 0x7fffffffffffff10), + BPF_ALU64_REG(BPF_ADD, BPF_REG_1, BPF_REG_0), + + BPF_LD_IMM64(BPF_REG_0, 0x8000000000000000), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 1), + /* r1 unsigned range is [0x7fffffffffffff10, 0x800000000000000f] */ + BPF_JMP_REG(BPF_JLT, BPF_REG_0, BPF_REG_1, -2), + + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .result = ACCEPT, + .prog_type = BPF_PROG_TYPE_XDP, +}, +{ + "bound check with JMP_JSLT for crossing 64-bit signed boundary", + .insns = { + BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)), + BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data_end)), + BPF_MOV64_REG(BPF_REG_1, BPF_REG_2), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 1), + BPF_JMP_REG(BPF_JGT, BPF_REG_1, BPF_REG_3, 8), + + BPF_LDX_MEM(BPF_B, BPF_REG_1, BPF_REG_2, 0), + BPF_LD_IMM64(BPF_REG_0, 0x7fffffffffffff10), + BPF_ALU64_REG(BPF_ADD, BPF_REG_1, BPF_REG_0), + + BPF_LD_IMM64(BPF_REG_0, 0x8000000000000000), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 1), + /* r1 signed range is [S64_MIN, S64_MAX] */ + BPF_JMP_REG(BPF_JSLT, BPF_REG_0, BPF_REG_1, -2), + + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .errstr = "BPF program is too large", + .result = REJECT, + .prog_type = BPF_PROG_TYPE_XDP, +}, +{ + "bound check for loop upper bound greater than U32_MAX", + .insns = { + BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)), + BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data_end)), + BPF_MOV64_REG(BPF_REG_1, BPF_REG_2), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 1), + BPF_JMP_REG(BPF_JGT, BPF_REG_1, BPF_REG_3, 8), + + BPF_LDX_MEM(BPF_B, BPF_REG_1, BPF_REG_2, 0), + BPF_LD_IMM64(BPF_REG_0, 0x100000000), + BPF_ALU64_REG(BPF_ADD, BPF_REG_1, BPF_REG_0), + + BPF_LD_IMM64(BPF_REG_0, 0x100000000), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 1), + BPF_JMP_REG(BPF_JLT, BPF_REG_0, BPF_REG_1, -2), + + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .result = ACCEPT, + .prog_type = BPF_PROG_TYPE_XDP, +}, +{ + "bound check with JMP32_JLT for crossing 32-bit signed boundary", + .insns = { + BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)), + BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data_end)), + BPF_MOV64_REG(BPF_REG_1, BPF_REG_2), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 1), + BPF_JMP_REG(BPF_JGT, BPF_REG_1, BPF_REG_3, 6), + + BPF_LDX_MEM(BPF_B, BPF_REG_1, BPF_REG_2, 0), + BPF_MOV32_IMM(BPF_REG_0, 0x7fffff10), + BPF_ALU32_REG(BPF_ADD, BPF_REG_1, BPF_REG_0), + + BPF_MOV32_IMM(BPF_REG_0, 0x80000000), + BPF_ALU32_IMM(BPF_ADD, BPF_REG_0, 1), + /* r1 unsigned range is [0, 0x8000000f] */ + BPF_JMP32_REG(BPF_JLT, BPF_REG_0, BPF_REG_1, -2), + + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .result = ACCEPT, + .prog_type = BPF_PROG_TYPE_XDP, +}, +{ + "bound check with JMP32_JSLT for crossing 32-bit signed boundary", + .insns = { + BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, offsetof(struct xdp_md, data)), + BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, offsetof(struct xdp_md, data_end)), + BPF_MOV64_REG(BPF_REG_1, BPF_REG_2), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 1), + BPF_JMP_REG(BPF_JGT, BPF_REG_1, BPF_REG_3, 6), + + BPF_LDX_MEM(BPF_B, BPF_REG_1, BPF_REG_2, 0), + BPF_MOV32_IMM(BPF_REG_0, 0x7fffff10), + BPF_ALU32_REG(BPF_ADD, BPF_REG_1, BPF_REG_0), + + BPF_MOV32_IMM(BPF_REG_0, 0x80000000), + BPF_ALU32_IMM(BPF_ADD, BPF_REG_0, 1), + /* r1 signed range is [S32_MIN, S32_MAX] */ + BPF_JMP32_REG(BPF_JSLT, BPF_REG_0, BPF_REG_1, -2), + + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .errstr = "BPF program is too large", + .result = REJECT, + .prog_type = BPF_PROG_TYPE_XDP, +},
linux-kselftest-mirror@lists.linaro.org
-
Daniel Borkmann -
Xu Kuohai