tso.py uses the active features at the time of test execution as the set of available gso features to test. This means if a gso feature is supported but toggled off at test start, the test will be skipped with a "Device does not support {feature}" message.

Instead, we can enumerate the set of toggleable features by capturing the driver's hw_features bitmap. To avoid configuration side-effects from running the test, we also snapshot the wanted_features flag set before making any feature changes, and then attempt to restore the same set of wanted_features before test exit.

Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test") Signed-off-by: Daniel Zahka daniel.zahka@gmail.com --- tools/testing/selftests/drivers/net/hw/tso.py | 52 ++++++++++++++----- 1 file changed, 40 insertions(+), 12 deletions(-)

diff --git a/tools/testing/selftests/drivers/net/hw/tso.py b/tools/testing/selftests/drivers/net/hw/tso.py index 3370827409aa..f8386e3d88cd 100755 --- a/tools/testing/selftests/drivers/net/hw/tso.py +++ b/tools/testing/selftests/drivers/net/hw/tso.py @@ -119,15 +119,30 @@ def build_tunnel(cfg, outer_ipver, tun_info): return remote_v4, remote_v6

+def restore_wanted_features(cfg): + features_cmd = "" + for feature in cfg.hw_features: + setting = "on" if feature in cfg.wanted_features else "off" + features_cmd += f" {feature} {setting}" + try: + ethtool(f"-K {cfg.ifname} {features_cmd}") + except Exception as e: + ksft_pr(f"WARNING: failure restoring wanted features: {e}") + + def test_builder(name, cfg, outer_ipver, feature, tun=None, inner_ipver=None): """Construct specific tests from the common template.""" def f(cfg): cfg.require_ipver(outer_ipver) + defer(restore_wanted_features, cfg)

if not cfg.have_stat_super_count and \ not cfg.have_stat_wire_count: raise KsftSkipEx(f"Device does not support LSO queue stats")

+ if feature not in cfg.hw_features: + raise KsftSkipEx(f"Device does not support {feature}") + ipver = outer_ipver if tun: remote_v4, remote_v6 = build_tunnel(cfg, ipver, tun) @@ -138,12 +153,12 @@ def test_builder(name, cfg, outer_ipver, feature, tun=None, inner_ipver=None):

tun_partial = tun and tun[1] # Tunnel which can silently fall back to gso-partial - has_gso_partial = tun and 'tx-gso-partial' in cfg.features + has_gso_partial = tun and 'tx-gso-partial' in cfg.hw_features

# For TSO4 via partial we need mangleid if ipver == "4" and feature in cfg.partial_features: ksft_pr("Testing with mangleid enabled") - if 'tx-tcp-mangleid-segmentation' not in cfg.features: + if 'tx-tcp-mangleid-segmentation' not in cfg.hw_features: ethtool(f"-K {cfg.ifname} tx-tcp-mangleid-segmentation on") defer(ethtool, f"-K {cfg.ifname} tx-tcp-mangleid-segmentation off")

@@ -161,11 +176,8 @@ def test_builder(name, cfg, outer_ipver, feature, tun=None, inner_ipver=None): should_lso=tun_partial)

# Full feature enabled. - if feature in cfg.features: - ethtool(f"-K {cfg.ifname} {feature} on") - run_one_stream(cfg, ipver, remote_v4, remote_v6, should_lso=True) - else: - raise KsftXfailEx(f"Device does not support {feature}") + ethtool(f"-K {cfg.ifname} {feature} on") + run_one_stream(cfg, ipver, remote_v4, remote_v6, should_lso=True)

f.__name__ = name + ((outer_ipver + "_") if tun else "") + "ipv" + inner_ipver return f @@ -176,23 +188,39 @@ def query_nic_features(cfg) -> None: cfg.have_stat_super_count = False cfg.have_stat_wire_count = False

- cfg.features = set() features = cfg.ethnl.features_get({"header": {"dev-index": cfg.ifindex}}) - for f in features["active"]["bits"]["bit"]: - cfg.features.add(f["name"]) + + cfg.wanted_features = set() + for f in features["wanted"]["bits"]["bit"]: + cfg.wanted_features.add(f["name"]) + + cfg.hw_features = set() + hw_all_features_cmd = "" + for f in features["hw"]["bits"]["bit"]: + if f.get("value", False): + feature = f["name"] + cfg.hw_features.add(feature) + hw_all_features_cmd += f" {feature} on" + try: + ethtool(f"-K {cfg.ifname} {hw_all_features_cmd}") + except Exception as e: + ksft_pr(f"WARNING: failure enabling all hw features: {e}") + ksft_pr("partial gso feature detection may be impacted")

# Check which features are supported via GSO partial cfg.partial_features = set() - if 'tx-gso-partial' in cfg.features: + if 'tx-gso-partial' in cfg.hw_features: ethtool(f"-K {cfg.ifname} tx-gso-partial off")

no_partial = set() features = cfg.ethnl.features_get({"header": {"dev-index": cfg.ifindex}}) for f in features["active"]["bits"]["bit"]: no_partial.add(f["name"]) - cfg.partial_features = cfg.features - no_partial + cfg.partial_features = cfg.hw_features - no_partial ethtool(f"-K {cfg.ifname} tx-gso-partial on")

+ restore_wanted_features(cfg) + stats = cfg.netnl.qstats_get({"ifindex": cfg.ifindex}, dump=True) if stats: if 'tx-hw-gso-packets' in stats[0]:

The non-tunneled tso6 test case was showing up as: ok 8 tso.ipv4

This is because of the way test_builder() uses the inner_ipver arg in test naming, and how test_info is iterated over in main(). Given that some tunnels not supported yet, e.g. ipip or sit, only support ipv4 or ipv6 as the inner network protocol, I think the best fix here is to call test_builder() in separate branches for tunneled and non-tunneled tests, and to make supported inner l3 types an explicit attribute of tunnel test cases.

# Detected qstat for LSO wire-packets TAP version 13 1..14 ok 1 tso.ipv4 # Testing with mangleid enabled ok 2 tso.vxlan4_ipv4 ok 3 tso.vxlan4_ipv6 # Testing with mangleid enabled ok 4 tso.vxlan_csum4_ipv4 ok 5 tso.vxlan_csum4_ipv6 # Testing with mangleid enabled ok 6 tso.gre4_ipv4 ok 7 tso.gre4_ipv6 ok 8 tso.ipv6 # Testing with mangleid enabled ok 9 tso.vxlan6_ipv4 ok 10 tso.vxlan6_ipv6 # Testing with mangleid enabled ok 11 tso.vxlan_csum6_ipv4 ok 12 tso.vxlan_csum6_ipv6 # Testing with mangleid enabled ok 13 tso.gre6_ipv4 ok 14 tso.gre6_ipv6 # Totals: pass:14 fail:0 xfail:0 xpass:0 skip:0 error:0

Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test") Signed-off-by: Daniel Zahka daniel.zahka@gmail.com --- tools/testing/selftests/drivers/net/hw/tso.py | 26 ++++++++++--------- 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/tools/testing/selftests/drivers/net/hw/tso.py b/tools/testing/selftests/drivers/net/hw/tso.py index 6461a83b3d0e..5fddb5056a20 100755 --- a/tools/testing/selftests/drivers/net/hw/tso.py +++ b/tools/testing/selftests/drivers/net/hw/tso.py @@ -227,14 +227,14 @@ def main() -> None: query_nic_features(cfg)

test_info = ( - # name, v4/v6 ethtool_feature tun:(type, args) - ("", "4", "tx-tcp-segmentation", None), - ("", "6", "tx-tcp6-segmentation", None), - ("vxlan", "4", "tx-udp_tnl-segmentation", ("vxlan", "id 100 dstport 4789 noudpcsum")), - ("vxlan", "6", "tx-udp_tnl-segmentation", ("vxlan", "id 100 dstport 4789 udp6zerocsumtx udp6zerocsumrx")), - ("vxlan_csum", "", "tx-udp_tnl-csum-segmentation", ("vxlan", "id 100 dstport 4789 udpcsum")), - ("gre", "4", "tx-gre-segmentation", ("gre", "")), - ("gre", "6", "tx-gre-segmentation", ("ip6gre", "")), + # name, v4/v6 ethtool_feature tun:(type, args, inner ip versions) + ("", "4", "tx-tcp-segmentation", None), + ("", "6", "tx-tcp6-segmentation", None), + ("vxlan", "4", "tx-udp_tnl-segmentation", ("vxlan", "id 100 dstport 4789 noudpcsum", ("4", "6"))), + ("vxlan", "6", "tx-udp_tnl-segmentation", ("vxlan", "id 100 dstport 4789 udp6zerocsumtx udp6zerocsumrx", ("4", "6"))), + ("vxlan_csum", "", "tx-udp_tnl-csum-segmentation", ("vxlan", "id 100 dstport 4789 udpcsum", ("4", "6"))), + ("gre", "4", "tx-gre-segmentation", ("gre", "", ("4", "6"))), + ("gre", "6", "tx-gre-segmentation", ("ip6gre","", ("4", "6"))), )

cases = [] @@ -244,11 +244,13 @@ def main() -> None: if info[1] and outer_ipver != info[1]: continue

- cases.append(test_builder(info[0], cfg, outer_ipver, info[2], - tun=info[3], inner_ipver="4")) if info[3]: - cases.append(test_builder(info[0], cfg, outer_ipver, info[2], - tun=info[3], inner_ipver="6")) + cases += [ + test_builder(info[0], cfg, outer_ipver, info[2], info[3], inner_ipver) + for inner_ipver in info[3][2] + ] + else: + cases.append(test_builder(info[0], cfg, outer_ipver, info[2], None, outer_ipver))

ksft_run(cases=cases, args=(cfg, )) ksft_exit()