For ppc64le, depending on the kernel configuration used, offset 16 from function start address can also be considered function entry. Update the test case to accommodate such configurations.
Signed-off-by: Hari Bathini hbathini@linux.ibm.com --- .../selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc index a16c6a6f6055..c03b94cc5784 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc @@ -111,7 +111,11 @@ check_error 'p vfs_read $arg* ^$arg*' # DOUBLE_ARGS if !grep -q 'kernel return probes support:' README; then check_error 'r vfs_read ^$arg*' # NOFENTRY_ARGS fi +if [ "$(uname -m)" = "ppc64le" ]; then +check_error 'p vfs_read+20 ^$arg*' # NOFENTRY_ARGS +else check_error 'p vfs_read+8 ^$arg*' # NOFENTRY_ARGS +fi check_error 'p vfs_read ^hoge' # NO_BTFARG check_error 'p kfree ^$arg10' # NO_BTFARG (exceed the number of parameters) check_error 'r kfree ^$retval' # NO_RETVAL
Hi!
On Sat, Nov 02, 2024 at 12:49:25AM +0530, Hari Bathini wrote:
For ppc64le, depending on the kernel configuration used, offset 16 from function start address can also be considered function entry. Update the test case to accommodate such configurations.
(This is true for all ELfv2, not just LE. For the kernel that is about the same).
The LEP and GEP can differ by zero, one, two, four, eight, or sixteen insns (where an insn is four bytes). Four insns is common, yes, but maybe you can support all? See the function symbol's st_other field to see what the offset is: 0, 1: zero insns, zero bytes N = 2..6: 1 << (N-2) insns, i.e. 1<<N bytes 7: reserved
(This is the top 3 bits of st_other, the other bits have other meanings).
Four insns is common, yes, but by no means the only possibility.
Segher
On 02/11/24 2:29 am, Segher Boessenkool wrote:
Hi!
On Sat, Nov 02, 2024 at 12:49:25AM +0530, Hari Bathini wrote:
For ppc64le, depending on the kernel configuration used, offset 16 from function start address can also be considered function entry. Update the test case to accommodate such configurations.
(This is true for all ELfv2, not just LE. For the kernel that is about the same).
The LEP and GEP can differ by zero, one, two, four, eight, or sixteen insns (where an insn is four bytes). Four insns is common, yes, but maybe you can support all? See the function symbol's st_other field to see what the offset is: 0, 1: zero insns, zero bytes N = 2..6: 1 << (N-2) insns, i.e. 1<<N bytes 7: reserved
(This is the top 3 bits of st_other, the other bits have other meanings).
Four insns is common, yes, but by no means the only possibility.
Hi Segher,
Querying for function arguments is supported on kprobes only at function entry. This is a negative test case where the offset is intentionally set beyond function entry while querying for function arguments. I guess, simply setting the offset to 20 (vfs_read is anyway going to be beyond 5 instructions) instead of 8 for powerpc would make all platforms and ABI variants happy?
Thanks Hari
Hi!
On Mon, Nov 04, 2024 at 02:51:57PM +0530, Hari Bathini wrote:
On 02/11/24 2:29 am, Segher Boessenkool wrote:
On Sat, Nov 02, 2024 at 12:49:25AM +0530, Hari Bathini wrote:
For ppc64le, depending on the kernel configuration used, offset 16 from function start address can also be considered function entry. Update the test case to accommodate such configurations.
(This is true for all ELfv2, not just LE. For the kernel that is about the same).
The LEP and GEP can differ by zero, one, two, four, eight, or sixteen insns (where an insn is four bytes). Four insns is common, yes, but maybe you can support all? See the function symbol's st_other field to see what the offset is: 0, 1: zero insns, zero bytes N = 2..6: 1 << (N-2) insns, i.e. 1<<N bytes 7: reserved
(This is the top 3 bits of st_other, the other bits have other meanings).
Four insns is common, yes, but by no means the only possibility.
Hi Segher,
Querying for function arguments is supported on kprobes only at function entry. This is a negative test case where the offset is intentionally set beyond function entry while querying for function arguments. I guess, simply setting the offset to 20 (vfs_read is anyway going to be beyond 5 instructions) instead of 8 for powerpc would make all platforms and ABI variants happy?
I have no idea. What is this "offset" anyway?
This is just the ELFv2 ABI. No platform can make up its own thing at all (well, none decided to be gratuitously incompatible, so far). And there are no "ABI variants"!
You're just making assumptions here that are based on nothing else but observations of what is done most of the time. That might work for a while -- maybe a long while even! -- but it can easily break down.
Segher
On 04/11/24 3:14 pm, Segher Boessenkool wrote:
Hi!
On Mon, Nov 04, 2024 at 02:51:57PM +0530, Hari Bathini wrote:
On 02/11/24 2:29 am, Segher Boessenkool wrote:
On Sat, Nov 02, 2024 at 12:49:25AM +0530, Hari Bathini wrote:
For ppc64le, depending on the kernel configuration used, offset 16 from function start address can also be considered function entry. Update the test case to accommodate such configurations.
(This is true for all ELfv2, not just LE. For the kernel that is about the same).
The LEP and GEP can differ by zero, one, two, four, eight, or sixteen insns (where an insn is four bytes). Four insns is common, yes, but maybe you can support all? See the function symbol's st_other field to see what the offset is: 0, 1: zero insns, zero bytes N = 2..6: 1 << (N-2) insns, i.e. 1<<N bytes 7: reserved
(This is the top 3 bits of st_other, the other bits have other meanings).
Four insns is common, yes, but by no means the only possibility.
Hi Segher,
Querying for function arguments is supported on kprobes only at function entry. This is a negative test case where the offset is intentionally set beyond function entry while querying for function arguments. I guess, simply setting the offset to 20 (vfs_read is anyway going to be beyond 5 instructions) instead of 8 for powerpc would make all platforms and ABI variants happy?
I have no idea. What is this "offset" anyway?
offset (in bytes) from function start address..
This is just the ELFv2 ABI. No platform can make up its own thing at all (well, none decided to be gratuitously incompatible, so far). And there are no "ABI variants"!
The test case applies for ABIv1 & ABIv2. All ppc32 & ppc64 platforms..
You're just making assumptions here that are based on nothing else but observations of what is done most of the time. That might work for a while -- maybe a long while even! -- but it can easily break down.
Hmmm.. I understand that you want the test case to read st_other field but would you rather suggest an offset of 64? Is a GEP of 8/16 instructions going to be true anytime soon or is it true already for some cases? The reason I ask that is some kprobe/ftrace code in the kernel might need a bit of re-look if that is the case.
Thanks Hari
Hi!
On Mon, Nov 04, 2024 at 03:40:26PM +0530, Hari Bathini wrote:
On 04/11/24 3:14 pm, Segher Boessenkool wrote:
On Mon, Nov 04, 2024 at 02:51:57PM +0530, Hari Bathini wrote:
On 02/11/24 2:29 am, Segher Boessenkool wrote:
On Sat, Nov 02, 2024 at 12:49:25AM +0530, Hari Bathini wrote:
For ppc64le, depending on the kernel configuration used, offset 16 from function start address can also be considered function entry. Update the test case to accommodate such configurations.
(This is true for all ELfv2, not just LE. For the kernel that is about the same).
The LEP and GEP can differ by zero, one, two, four, eight, or sixteen insns (where an insn is four bytes). Four insns is common, yes, but maybe you can support all? See the function symbol's st_other field to see what the offset is: 0, 1: zero insns, zero bytes N = 2..6: 1 << (N-2) insns, i.e. 1<<N bytes 7: reserved
(This is the top 3 bits of st_other, the other bits have other meanings).
Four insns is common, yes, but by no means the only possibility.
Hi Segher,
Querying for function arguments is supported on kprobes only at function entry. This is a negative test case where the offset is intentionally set beyond function entry while querying for function arguments. I guess, simply setting the offset to 20 (vfs_read is anyway going to be beyond 5 instructions) instead of 8 for powerpc would make all platforms and ABI variants happy?
I have no idea. What is this "offset" anyway?
offset (in bytes) from function start address..
But what is there?
This is just the ELFv2 ABI. No platform can make up its own thing at all (well, none decided to be gratuitously incompatible, so far). And there are no "ABI variants"!
The test case applies for ABIv1 & ABIv2. All ppc32 & ppc64 platforms..
Hrm. So you allow essentially random entry points on other ABIs to work?
You're just making assumptions here that are based on nothing else but observations of what is done most of the time. That might work for a while -- maybe a long while even! -- but it can easily break down.
Hmmm.. I understand that you want the test case to read st_other field but would you rather suggest an offset of 64?
I have no idea what "offset" means here.
Is a GEP of 8/16 instructions going to be true anytime soon or is it true already for some cases? The reason I ask that is some kprobe/ftrace code in the kernel might need a bit of re-look if that is the case.
An entry point has no instructions at all. Oh, you mean the code at the GEP.
The LEP can already be all the allowed distances after the GEP. And the .localentry GAS directive already supports all those distances always. Not a lot of code written in assembler does use that, and certainly GCC does not use a lot of the freedom it has here, but it could (and so could assembler programmers). Typically people will want to make the code here as short as possible, and there are restrictions on what is *allowed* to be done here anyway (ld, the link editor, can change this code after all!), so it is not too likely you will ever see big code at the GEP often, but times change, etc.
Segher
On Mon, 4 Nov 2024 04:36:15 -0600 Segher Boessenkool segher@kernel.crashing.org wrote:
Querying for function arguments is supported on kprobes only at function entry. This is a negative test case where the offset is intentionally set beyond function entry while querying for function arguments. I guess, simply setting the offset to 20 (vfs_read is anyway going to be beyond 5 instructions) instead of 8 for powerpc would make all platforms and ABI variants happy?
I have no idea. What is this "offset" anyway?
offset (in bytes) from function start address..
But what is there?
Function start address is what kallsyms returns. That is:
grep function /proc/kallsyms
This is just the ELFv2 ABI. No platform can make up its own thing at all (well, none decided to be gratuitously incompatible, so far). And there are no "ABI variants"!
The test case applies for ABIv1 & ABIv2. All ppc32 & ppc64 platforms..
Hrm. So you allow essentially random entry points on other ABIs to work?
You're just making assumptions here that are based on nothing else but observations of what is done most of the time. That might work for a while -- maybe a long while even! -- but it can easily break down.
Hmmm.. I understand that you want the test case to read st_other field but would you rather suggest an offset of 64?
I have no idea what "offset" means here.
The offset is the number of bytes from the address that is returned by kallsyms.
Is a GEP of 8/16 instructions going to be true anytime soon or is it true already for some cases? The reason I ask that is some kprobe/ftrace code in the kernel might need a bit of re-look if that is the case.
An entry point has no instructions at all. Oh, you mean the code at the GEP.
The LEP can already be all the allowed distances after the GEP. And the .localentry GAS directive already supports all those distances always. Not a lot of code written in assembler does use that, and certainly GCC does not use a lot of the freedom it has here, but it could (and so could assembler programmers). Typically people will want to make the code here as short as possible, and there are restrictions on what is *allowed* to be done here anyway (ld, the link editor, can change this code after all!), so it is not too likely you will ever see big code at the GEP often, but times change, etc.
This is all determined by the kernel. It's considered a function entry by the function:
arch_kprobe_on_func_entry()
Which on PowerPC has:
static bool arch_kprobe_on_func_entry(unsigned long offset) { #ifdef CONFIG_PPC64_ELF_ABI_V2 #ifdef CONFIG_KPROBES_ON_FTRACE return offset <= 16; #else return offset <= 8; #endif #else return !offset; #endif }
So, being greater than 16 on powerpc with config CONFIG_PPC64_ELF_ABI_V2 set, would work. If that function changes, then the test needs to change.
-- Steve
Hi Segher,
On 04/11/24 4:06 pm, Segher Boessenkool wrote:
Hi!
On Mon, Nov 04, 2024 at 03:40:26PM +0530, Hari Bathini wrote:
On 04/11/24 3:14 pm, Segher Boessenkool wrote:
On Mon, Nov 04, 2024 at 02:51:57PM +0530, Hari Bathini wrote:
On 02/11/24 2:29 am, Segher Boessenkool wrote:
On Sat, Nov 02, 2024 at 12:49:25AM +0530, Hari Bathini wrote:
For ppc64le, depending on the kernel configuration used, offset 16 from function start address can also be considered function entry. Update the test case to accommodate such configurations.
(This is true for all ELfv2, not just LE. For the kernel that is about the same).
The LEP and GEP can differ by zero, one, two, four, eight, or sixteen insns (where an insn is four bytes). Four insns is common, yes, but maybe you can support all? See the function symbol's st_other field to see what the offset is: 0, 1: zero insns, zero bytes N = 2..6: 1 << (N-2) insns, i.e. 1<<N bytes 7: reserved
(This is the top 3 bits of st_other, the other bits have other meanings).
Four insns is common, yes, but by no means the only possibility.
Hi Segher,
Querying for function arguments is supported on kprobes only at function entry. This is a negative test case where the offset is intentionally set beyond function entry while querying for function arguments. I guess, simply setting the offset to 20 (vfs_read is anyway going to be beyond 5 instructions) instead of 8 for powerpc would make all platforms and ABI variants happy?
I have no idea. What is this "offset" anyway?
offset (in bytes) from function start address..
But what is there?
This is just the ELFv2 ABI. No platform can make up its own thing at all (well, none decided to be gratuitously incompatible, so far). And there are no "ABI variants"!
The test case applies for ABIv1 & ABIv2. All ppc32 & ppc64 platforms..
Hrm. So you allow essentially random entry points on other ABIs to work?
You're just making assumptions here that are based on nothing else but observations of what is done most of the time. That might work for a while -- maybe a long while even! -- but it can easily break down.
Hmmm.. I understand that you want the test case to read st_other field but would you rather suggest an offset of 64?
I have no idea what "offset" means here.
Is a GEP of 8/16 instructions going to be true anytime soon or is it true already for some cases? The reason I ask that is some kprobe/ftrace code in the kernel might need a bit of re-look if that is the case.
An entry point has no instructions at all. Oh, you mean the code at the GEP.
The LEP can already be all the allowed distances after the GEP. And the .localentry GAS directive already supports all those distances always. Not a lot of code written in assembler does use that, and certainly GCC does not use a lot of the freedom it has here, but it could (and so could assembler programmers). Typically people will want to make the code here as short as possible, and there are restrictions on what is *allowed* to be done here anyway (ld, the link editor, can change this code after all!), so it is not too likely you will ever see big code at the GEP often, but times change, etc.
Seems like a bit of misunderstanding there. Function entry here intends to mean the actual start of function code (function prologue) - after GEP and function profiling sequence (mflr r0; bl mcount).
Function arguments can be accessed with kprobe only while setting a probe at an address the kernel treats as function start address. Note that the test case pass criteria here is setting probe to fail by providing an address (sym+offset) beyond the function start address.
And in this specific test case (with "vfs_read+8", where vfs_read is the symbol and '8' is the offset), the test case was failing on powerpc because setting the probe at 'sym+8' was succeeding, as anywhere between 'sym' to 'sym+16' is treated as function start address on powerpc:
https://github.com/torvalds/linux/blob/master/arch/powerpc/kernel/kprobes.c#...
So, the fix here essentially is to provide an address that is at least an insn or two beyond function start address. As GEP is 8 bytes and function profile sequence is 8 bytes, sym+20 is beyond function start address on ppc64le. In fact, sym+20 should work for other platforms too as sym+20 not treated as function start address on any platform on powerpc as of today, and that is all the test case cares about...
Thanks Hari
Hi!
On Mon, Nov 04, 2024 at 11:06:23PM +0530, Hari Bathini wrote:
Seems like a bit of misunderstanding there. Function entry here intends to mean the actual start of function code (function prologue) - after GEP and function profiling sequence (mflr r0; bl mcount).
What you call "function entry" here simply does not exist. The compiler can -- and ***WILL***, ***DOES*** -- mix up all of that. In particular, "function prologue" does not exist at all (on any architecture worth its salt, including PowerPC), and all instructions you consider part of a function prologue might end up anywhere. The "profiling sequence" is part of that btw, and that typically ends up *not* the first thing in the function, not the first thing after the LEP (register saves are earlier often, they are generated in that order in the first place, but they can (and will) be moved if that schedules better).
Function arguments can be accessed with kprobe only while setting a probe at an address the kernel treats as function start address.
That is a silly assumption to make. There is no guarantee you can access function arguments *at all*, we're not in 1975 anymore. You *need* to look at debug information if you want to deal with anything about your high-level language program. Looking at the machine code can only tell you about the machine state, whatever is in registers etc.
Note that the test case pass criteria here is setting probe to fail by providing an address (sym+offset) beyond the function start address.
And in this specific test case (with "vfs_read+8", where vfs_read is the symbol and '8' is the offset), the test case was failing on powerpc because setting the probe at 'sym+8' was succeeding, as anywhere between 'sym' to 'sym+16' is treated as function start address on powerpc:
Yeah, fragile tests sometimes break. Changing a randomly chosen number to some other randomly chosen number will not fix the problem (but you can postpone having to deal with it, sure!)
Segher
Hi,
On Tue, 5 Nov 2024 02:20:18 -0600 Segher Boessenkool segher@kernel.crashing.org wrote:
Hi!
On Mon, Nov 04, 2024 at 11:06:23PM +0530, Hari Bathini wrote:
Seems like a bit of misunderstanding there. Function entry here intends to mean the actual start of function code (function prologue) - after GEP and function profiling sequence (mflr r0; bl mcount).
What you call "function entry" here simply does not exist. The compiler can -- and ***WILL***, ***DOES*** -- mix up all of that.
Here is the "function entry" means the function address. Not the prologue. On some architecture, we are sure fixed sequences right after the function address for ftrace/security. For example, x86 has an `ENDBR` for security. Thus, even if we tend to put a probe on the "function entry", kprobes shifts the probe point forcibly skipping the `ENDBR`. So from the probe callback, the probed address does not look like the function address (shift the sizeof(ENDBR)).
However, the ENDBR does nothing from the program point of view, we can still think of that address as the address of the function. That is the reason why I introduced arch_kprobe_on_func_entry().
For the other architecture, it might be misunderstood and could be miss-implemented. In that case, we should fix that.
In particular, "function prologue" does not exist at all (on any architecture worth its salt, including PowerPC), and all instructions you consider part of a function prologue might end up anywhere. The "profiling sequence" is part of that btw, and that typically ends up *not* the first thing in the function, not the first thing after the LEP (register saves are earlier often, they are generated in that order in the first place, but they can (and will) be moved if that schedules better).
Function arguments can be accessed with kprobe only while setting a probe at an address the kernel treats as function start address.
That is a silly assumption to make. There is no guarantee you can access function arguments *at all*, we're not in 1975 anymore. You *need* to look at debug information if you want to deal with anything about your high-level language program. Looking at the machine code can only tell you about the machine state, whatever is in registers etc.
Yeah, understood. So the `$arg*` here does not guarantee to access arguments, but the best effort to do that. And it fully depends on regs_get_kernel_argument(). Thus `$arg*` works only where the regs_get_kernel_argument() can return most likely function argument value from `pt_regs`. That is where we call "function entry" in this context.
And since it checks the function entry by arch_kprobe_on_func_entry() this test fails on powerpc because it returns true if the offset from the kallsyms symbol address is less than 8/16 bytes.
Note that the test case pass criteria here is setting probe to fail by providing an address (sym+offset) beyond the function start address.
And in this specific test case (with "vfs_read+8", where vfs_read is the symbol and '8' is the offset), the test case was failing on powerpc because setting the probe at 'sym+8' was succeeding, as anywhere between 'sym' to 'sym+16' is treated as function start address on powerpc:
Yeah, fragile tests sometimes break. Changing a randomly chosen number to some other randomly chosen number will not fix the problem (but you can postpone having to deal with it, sure!)
Yeah, sorry about the test case. Actually `+8` is also not a good number for x86 too since we are not sure whether the address is an instruction boundary or not. In that case it may report another error and failed.
Thank you,
Segher
Hi!
On Tue, Nov 05, 2024 at 06:17:51PM +0900, Masami Hiramatsu wrote:
On Tue, 5 Nov 2024 02:20:18 -0600 Segher Boessenkool segher@kernel.crashing.org wrote:
On Mon, Nov 04, 2024 at 11:06:23PM +0530, Hari Bathini wrote:
Seems like a bit of misunderstanding there. Function entry here intends to mean the actual start of function code (function prologue) - after GEP and function profiling sequence (mflr r0; bl mcount).
What you call "function entry" here simply does not exist. The compiler can -- and ***WILL***, ***DOES*** -- mix up all of that.
Here is the "function entry" means the function address.
"Function entry point". "Function entry" can mean whatever nebulous thing done at the start of a function :-)
You're free to use your own terminology of course, but it help to use standard names for standard things!
Not the prologue.
But that is literally what Hari said, so it confused me.
On some architecture, we are sure fixed sequences right after the function address for ftrace/security. For example, x86 has an `ENDBR` for security. Thus, even if we tend to put a probe on the "function entry", kprobes shifts the probe point forcibly skipping the `ENDBR`. So from the probe callback, the probed address does not look like the function address (shift the sizeof(ENDBR)).
On almmost all architectures and ABIs the prologues aren't so very fixed, which is a good thing, because typically the compiler can make things better in some way (typically faster or smaller code). Or other parts of the toolchain can, the loader or dynamic loader often.
However, the ENDBR does nothing from the program point of view, we can still think of that address as the address of the function. That is the reason why I introduced arch_kprobe_on_func_entry().
Understood.
For the other architecture, it might be misunderstood and could be miss-implemented. In that case, we should fix that.
In particular, "function prologue" does not exist at all (on any architecture worth its salt, including PowerPC), and all instructions you consider part of a function prologue might end up anywhere. The "profiling sequence" is part of that btw, and that typically ends up *not* the first thing in the function, not the first thing after the LEP (register saves are earlier often, they are generated in that order in the first place, but they can (and will) be moved if that schedules better).
Function arguments can be accessed with kprobe only while setting a probe at an address the kernel treats as function start address.
That is a silly assumption to make. There is no guarantee you can access function arguments *at all*, we're not in 1975 anymore. You *need* to look at debug information if you want to deal with anything about your high-level language program. Looking at the machine code can only tell you about the machine state, whatever is in registers etc.
Yeah, understood. So the `$arg*` here does not guarantee to access arguments, but the best effort to do that. And it fully depends on
Is that GDB syntax? Or what else?
regs_get_kernel_argument(). Thus `$arg*` works only where the regs_get_kernel_argument() can return most likely function argument value from `pt_regs`. That is where we call "function entry" in this context.
And since it checks the function entry by arch_kprobe_on_func_entry() this test fails on powerpc because it returns true if the offset from the kallsyms symbol address is less than 8/16 bytes.
Note that the test case pass criteria here is setting probe to fail by providing an address (sym+offset) beyond the function start address.
And in this specific test case (with "vfs_read+8", where vfs_read is the symbol and '8' is the offset), the test case was failing on powerpc because setting the probe at 'sym+8' was succeeding, as anywhere between 'sym' to 'sym+16' is treated as function start address on powerpc:
Yeah, fragile tests sometimes break. Changing a randomly chosen number to some other randomly chosen number will not fix the problem (but you can postpone having to deal with it, sure!)
Yeah, sorry about the test case. Actually `+8` is also not a good number for x86 too since we are not sure whether the address is an instruction boundary or not. In that case it may report another error and failed.
So what is it that the testcase really wants to test for?
Thanks for explaining the context somewhat, I know nothing (except all details about ELFv2 and the other PowerPC ABIs :-) ), it helped :-)
Segher
On 06/11/24 1:22 am, Segher Boessenkool wrote:
Hi!
On Tue, Nov 05, 2024 at 06:17:51PM +0900, Masami Hiramatsu wrote:
On Tue, 5 Nov 2024 02:20:18 -0600 Segher Boessenkool segher@kernel.crashing.org wrote:
On Mon, Nov 04, 2024 at 11:06:23PM +0530, Hari Bathini wrote:
Seems like a bit of misunderstanding there. Function entry here intends to mean the actual start of function code (function prologue) - after GEP and function profiling sequence (mflr r0; bl mcount).
What you call "function entry" here simply does not exist. The compiler can -- and ***WILL***, ***DOES*** -- mix up all of that.
Here is the "function entry" means the function address.
"Function entry point". "Function entry" can mean whatever nebulous thing done at the start of a function :-)
You're free to use your own terminology of course, but it help to use standard names for standard things!
Not the prologue.
But that is literally what Hari said, so it confused me.
Sorry about that. I should have said.. maybe prologue or whatever nebulous thing at the start of a function :-)
Basically, the address provided to test case can be any insn in the function code expect what the kernel considers function entry address..
Thanks Hari
On Sat, 2 Nov 2024 00:49:25 +0530 Hari Bathini hbathini@linux.ibm.com wrote:
For ppc64le, depending on the kernel configuration used, offset 16 from function start address can also be considered function entry. Update the test case to accommodate such configurations.
Hi Hari, so have you met any error on this test case? Can you share the error result too?
Thank you,
Signed-off-by: Hari Bathini hbathini@linux.ibm.com
.../selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc index a16c6a6f6055..c03b94cc5784 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc @@ -111,7 +111,11 @@ check_error 'p vfs_read $arg* ^$arg*' # DOUBLE_ARGS if !grep -q 'kernel return probes support:' README; then check_error 'r vfs_read ^$arg*' # NOFENTRY_ARGS fi +if [ "$(uname -m)" = "ppc64le" ]; then +check_error 'p vfs_read+20 ^$arg*' # NOFENTRY_ARGS +else check_error 'p vfs_read+8 ^$arg*' # NOFENTRY_ARGS +fi check_error 'p vfs_read ^hoge' # NO_BTFARG check_error 'p kfree ^$arg10' # NO_BTFARG (exceed the number of parameters) check_error 'r kfree ^$retval' # NO_RETVAL -- 2.47.0
On 03/11/24 10:27 am, Masami Hiramatsu (Google) wrote:
On Sat, 2 Nov 2024 00:49:25 +0530 Hari Bathini hbathini@linux.ibm.com wrote:
For ppc64le, depending on the kernel configuration used, offset 16 from function start address can also be considered function entry. Update the test case to accommodate such configurations.
Hi Hari, so have you met any error on this test case?
Hi Masami,
vfs_read+8 is function entry on powerpc. So, the test case bails out at: "check_error 'p vfs_read+8 ^$arg*' # NOFENTRY_ARGS"
as it allows setting kprobe "vfs_read+8 $arg*"
Can you share the error result too?
End of the log file for reference:
" Test command: p vfs_read $arg* $arg* [2661828.483436] trace_kprobe: error: $arg* can be used only once in the parameters Command: p vfs_read $arg* $arg* ^ Test command: p vfs_read+8 $arg* "
Thanks Hari
Thank you,
Signed-off-by: Hari Bathini hbathini@linux.ibm.com
.../selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc index a16c6a6f6055..c03b94cc5784 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc @@ -111,7 +111,11 @@ check_error 'p vfs_read $arg* ^$arg*' # DOUBLE_ARGS if !grep -q 'kernel return probes support:' README; then check_error 'r vfs_read ^$arg*' # NOFENTRY_ARGS fi +if [ "$(uname -m)" = "ppc64le" ]; then +check_error 'p vfs_read+20 ^$arg*' # NOFENTRY_ARGS +else check_error 'p vfs_read+8 ^$arg*' # NOFENTRY_ARGS +fi check_error 'p vfs_read ^hoge' # NO_BTFARG check_error 'p kfree ^$arg10' # NO_BTFARG (exceed the number of parameters) check_error 'r kfree ^$retval' # NO_RETVAL -- 2.47.0
On Mon, 4 Nov 2024 15:02:12 +0530 Hari Bathini hbathini@linux.ibm.com wrote:
On 03/11/24 10:27 am, Masami Hiramatsu (Google) wrote:
On Sat, 2 Nov 2024 00:49:25 +0530 Hari Bathini hbathini@linux.ibm.com wrote:
For ppc64le, depending on the kernel configuration used, offset 16 from function start address can also be considered function entry. Update the test case to accommodate such configurations.
Hi Hari, so have you met any error on this test case?
Hi Masami,
vfs_read+8 is function entry on powerpc. So, the test case bails out at: "check_error 'p vfs_read+8 ^$arg*' # NOFENTRY_ARGS"
as it allows setting kprobe "vfs_read+8 $arg*"
Can you share the error result too?
End of the log file for reference:
" Test command: p vfs_read $arg* $arg* [2661828.483436] trace_kprobe: error: $arg* can be used only once in the parameters Command: p vfs_read $arg* $arg* ^ Test command: p vfs_read+8 $arg* "
Ah, OK. so it should fail but passed. (and test failure)
Thank you,
Thanks Hari
Thank you,
Signed-off-by: Hari Bathini hbathini@linux.ibm.com
.../selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc index a16c6a6f6055..c03b94cc5784 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc @@ -111,7 +111,11 @@ check_error 'p vfs_read $arg* ^$arg*' # DOUBLE_ARGS if !grep -q 'kernel return probes support:' README; then check_error 'r vfs_read ^$arg*' # NOFENTRY_ARGS fi +if [ "$(uname -m)" = "ppc64le" ]; then +check_error 'p vfs_read+20 ^$arg*' # NOFENTRY_ARGS +else check_error 'p vfs_read+8 ^$arg*' # NOFENTRY_ARGS +fi check_error 'p vfs_read ^hoge' # NO_BTFARG check_error 'p kfree ^$arg10' # NO_BTFARG (exceed the number of parameters) check_error 'r kfree ^$retval' # NO_RETVAL -- 2.47.0
linux-kselftest-mirror@lists.linaro.org
-
Hari Bathini -
Masami Hiramatsu -
Segher Boessenkool -
Steven Rostedt