- Linux-kselftest-mirror - lists.linaro.org

[PATCH net-next v3 0/2] Add nci suit and virtual nci device driver

by Bongsu Jeon

From: Bongsu Jeon <bongsu.jeon(a)samsung.com> A NCI virtual device can be made to simulate a NCI device in user space. Using the virtual NCI device, The NCI module and application can be validated. This driver supports to communicate between the virtual NCI device and NCI module. To test the basic features of NCI module, selftest for nci is added. Test cases consist of making the virtual NCI device on/off and controlling the device's polling for NCI1.0 and NCI2.0 version. 1/2 is the Virtual NCI device driver. 2/2 is the NCI selftest suite v3: 1/2 - change the Kconfig help comment. - remove the mutex init code. - remove the unnecessary mutex(nci_send_mutex). - remove the full_txbuff. - add the code to release skb at error case. - refactor some code. v2: 1/2 - change the permission of the Virtual NCI device. - add the ioctl to find the nci device index. 2/2 - add the NCI selftest suite. MAINTAINERS | 8 + drivers/nfc/Kconfig | 11 + drivers/nfc/Makefile | 1 + drivers/nfc/virtual_ncidev.c | 227 ++++++++++ tools/testing/selftests/Makefile | 1 + tools/testing/selftests/nci/Makefile | 6 + tools/testing/selftests/nci/config | 3 + tools/testing/selftests/nci/nci_dev.c | 599 ++++++++++++++++++++++++++ 8 files changed, 856 insertions(+) create mode 100644 drivers/nfc/virtual_ncidev.c create mode 100644 tools/testing/selftests/nci/Makefile create mode 100644 tools/testing/selftests/nci/config create mode 100644 tools/testing/selftests/nci/nci_dev.c -- 2.25.1

4 years, 5 months

2
4
0 0

[PATCH v15 00/11] mm: introduce memfd_secret system call to create "secret" memory areas

by Mike Rapoport

From: Mike Rapoport <rppt(a)linux.ibm.com> Hi, @Andrew, this is based on v5.11-rc4-mmots-2021-01-19-13-54 with secretmem patches dropped from there, I can rebase whatever way you prefer. This is an implementation of "secret" mappings backed by a file descriptor. The file descriptor backing secret memory mappings is created using a dedicated memfd_secret system call The desired protection mode for the memory is configured using flags parameter of the system call. The mmap() of the file descriptor created with memfd_secret() will create a "secret" memory mapping. The pages in that mapping will be marked as not present in the direct map and will be present only in the page table of the owning mm. Although normally Linux userspace mappings are protected from other users, such secret mappings are useful for environments where a hostile tenant is trying to trick the kernel into giving them access to other tenants mappings. Additionally, in the future the secret mappings may be used as a mean to protect guest memory in a virtual machine host. For demonstration of secret memory usage we've created a userspace library https://git.kernel.org/pub/scm/linux/kernel/git/jejb/secret-memory-preloade… that does two things: the first is act as a preloader for openssl to redirect all the OPENSSL_malloc calls to secret memory meaning any secret keys get automatically protected this way and the other thing it does is expose the API to the user who needs it. We anticipate that a lot of the use cases would be like the openssl one: many toolkits that deal with secret keys already have special handling for the memory to try to give them greater protection, so this would simply be pluggable into the toolkits without any need for user application modification. Hiding secret memory mappings behind an anonymous file allows (ab)use of the page cache for tracking pages allocated for the "secret" mappings as well as using address_space_operations for e.g. page migration callbacks. The anonymous file may be also used implicitly, like hugetlb files, to implement mmap(MAP_SECRET) and use the secret memory areas with "native" mm ABIs in the future. To limit fragmentation of the direct map to splitting only PUD-size pages, I've added an amortizing cache of PMD-size pages to each file descriptor that is used as an allocation pool for the secret memory areas. As the memory allocated by secretmem becomes unmovable, we use CMA to back large page caches so that page allocator won't be surprised by failing attempt to migrate these pages. v15: * Add riscv/Kconfig update to disable set_memory operations for nommu builds (patch 3) * Update the code around add_to_page_cache() per Matthew's comments (patches 6,7) * Add fixups for build/checkpatch errors discovered by CI systems v14: https://lore.kernel.org/lkml/20201203062949.5484-1-rppt@kernel.org * Finally s/mod_node_page_state/mod_lruvec_page_state/ v13: https://lore.kernel.org/lkml/20201201074559.27742-1-rppt@kernel.org * Added Reviewed-by, thanks Catalin and David * s/mod_node_page_state/mod_lruvec_page_state/ as Shakeel suggested v12: https://lore.kernel.org/lkml/20201125092208.12544-1-rppt@kernel.org * Add detection of whether set_direct_map has actual effect on arm64 and bail out of CMA allocation for secretmem and the memfd_secret() syscall if pages would not be removed from the direct map v11: https://lore.kernel.org/lkml/20201124092556.12009-1-rppt@kernel.org * Drop support for uncached mappings Older history: v10: https://lore.kernel.org/lkml/20201123095432.5860-1-rppt@kernel.org v9: https://lore.kernel.org/lkml/20201117162932.13649-1-rppt@kernel.org v8: https://lore.kernel.org/lkml/20201110151444.20662-1-rppt@kernel.org v7: https://lore.kernel.org/lkml/20201026083752.13267-1-rppt@kernel.org v6: https://lore.kernel.org/lkml/20200924132904.1391-1-rppt@kernel.org v5: https://lore.kernel.org/lkml/20200916073539.3552-1-rppt@kernel.org v4: https://lore.kernel.org/lkml/20200818141554.13945-1-rppt@kernel.org v3: https://lore.kernel.org/lkml/20200804095035.18778-1-rppt@kernel.org v2: https://lore.kernel.org/lkml/20200727162935.31714-1-rppt@kernel.org v1: https://lore.kernel.org/lkml/20200720092435.17469-1-rppt@kernel.org Mike Rapoport (11): mm: add definition of PMD_PAGE_ORDER mmap: make mlock_future_check() global riscv/Kconfig: make direct map manipulation options depend on MMU set_memory: allow set_direct_map_*_noflush() for multiple pages set_memory: allow querying whether set_direct_map_*() is actually enabled mm: introduce memfd_secret system call to create "secret" memory areas secretmem: use PMD-size pages to amortize direct map fragmentation secretmem: add memcg accounting PM: hibernate: disable when there are active secretmem users arch, mm: wire up memfd_secret system call where relevant secretmem: test: add basic selftest for memfd_secret(2) arch/arm64/include/asm/Kbuild | 1 - arch/arm64/include/asm/cacheflush.h | 6 - arch/arm64/include/asm/set_memory.h | 17 + arch/arm64/include/uapi/asm/unistd.h | 1 + arch/arm64/kernel/machine_kexec.c | 1 + arch/arm64/mm/mmu.c | 6 +- arch/arm64/mm/pageattr.c | 23 +- arch/riscv/Kconfig | 4 +- arch/riscv/include/asm/set_memory.h | 4 +- arch/riscv/include/asm/unistd.h | 1 + arch/riscv/mm/pageattr.c | 8 +- arch/x86/entry/syscalls/syscall_32.tbl | 1 + arch/x86/entry/syscalls/syscall_64.tbl | 1 + arch/x86/include/asm/set_memory.h | 4 +- arch/x86/mm/pat/set_memory.c | 8 +- fs/dax.c | 11 +- include/linux/pgtable.h | 3 + include/linux/secretmem.h | 30 ++ include/linux/set_memory.h | 16 +- include/linux/syscalls.h | 1 + include/uapi/asm-generic/unistd.h | 6 +- include/uapi/linux/magic.h | 1 + kernel/power/hibernate.c | 5 +- kernel/power/snapshot.c | 4 +- kernel/sys_ni.c | 2 + mm/Kconfig | 5 + mm/Makefile | 1 + mm/filemap.c | 3 +- mm/gup.c | 10 + mm/internal.h | 3 + mm/mmap.c | 5 +- mm/secretmem.c | 444 ++++++++++++++++++++++ mm/vmalloc.c | 5 +- scripts/checksyscalls.sh | 4 + tools/testing/selftests/vm/.gitignore | 1 + tools/testing/selftests/vm/Makefile | 3 +- tools/testing/selftests/vm/memfd_secret.c | 296 +++++++++++++++ tools/testing/selftests/vm/run_vmtests | 17 + 38 files changed, 910 insertions(+), 52 deletions(-) create mode 100644 arch/arm64/include/asm/set_memory.h create mode 100644 include/linux/secretmem.h create mode 100644 mm/secretmem.c create mode 100644 tools/testing/selftests/vm/memfd_secret.c -- 2.28.0

4 years, 5 months

3
17
0 0

[PATCH v4] selftests: drivers: fpga: A test for interrupt support

by trix＠redhat.com

From: Tom Rix <trix(a)redhat.com> Check that the ioctl DFL_FPGA_PORT_ERR_GET_IRQ_NUM returns an expected result. Tested on vf device 0xbcc1 Sample run with # make -C tools/testing/selftests TARGETS=drivers/fpga run_tests ... TAP version 13 1..1 # selftests: drivers/fpga: intr # TAP version 13 # 1..1 # # Starting 1 tests from 1 test cases. # # RUN global.afu_intr ... # # OK global.afu_intr # ok 1 global.afu_intr # # PASSED: 1 / 1 tests passed. # # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 1 selftests: drivers/fpga: intr Signed-off-by: Tom Rix <trix(a)redhat.com> Acked-by: Moritz Fischer <mdf(a)kernel.org> --- v1: Convert to kselftest_harness.h framework v2: reverse xmas tree variables v3: rebase to linux-kselftest, tag linux-kselftest-next-5.11-rc3 --- MAINTAINERS | 1 + tools/testing/selftests/Makefile | 1 + tools/testing/selftests/drivers/fpga/Makefile | 7 ++++ tools/testing/selftests/drivers/fpga/config | 1 + tools/testing/selftests/drivers/fpga/intr.c | 36 +++++++++++++++++++ 5 files changed, 46 insertions(+) create mode 100644 tools/testing/selftests/drivers/fpga/Makefile create mode 100644 tools/testing/selftests/drivers/fpga/config create mode 100644 tools/testing/selftests/drivers/fpga/intr.c diff --git a/MAINTAINERS b/MAINTAINERS index 6eff4f720c72..10bea5417c82 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6972,6 +6972,7 @@ F: Documentation/driver-api/fpga/ F: Documentation/fpga/ F: drivers/fpga/ F: include/linux/fpga/ +F: tools/testing/selftests/drivers/fpga/ FPU EMULATOR M: Bill Metzenthen <billm(a)melbpc.org.au> diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index afbab4aeef3c..aad4763ec348 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -9,6 +9,7 @@ TARGETS += core TARGETS += cpufreq TARGETS += cpu-hotplug TARGETS += drivers/dma-buf +TARGETS += drivers/fpga TARGETS += efivarfs TARGETS += exec TARGETS += filesystems diff --git a/tools/testing/selftests/drivers/fpga/Makefile b/tools/testing/selftests/drivers/fpga/Makefile new file mode 100644 index 000000000000..eba35c405d5b --- /dev/null +++ b/tools/testing/selftests/drivers/fpga/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0-only +CFLAGS += -I../../../../../usr/include/ +CFLAGS += -I../../../../../include/uapi/ + +TEST_GEN_PROGS := intr + +include ../../lib.mk diff --git a/tools/testing/selftests/drivers/fpga/config b/tools/testing/selftests/drivers/fpga/config new file mode 100644 index 000000000000..e2111b81d8d7 --- /dev/null +++ b/tools/testing/selftests/drivers/fpga/config @@ -0,0 +1 @@ +CONFIG_FPGA_DFL_AFU=m diff --git a/tools/testing/selftests/drivers/fpga/intr.c b/tools/testing/selftests/drivers/fpga/intr.c new file mode 100644 index 000000000000..927dcc757f0b --- /dev/null +++ b/tools/testing/selftests/drivers/fpga/intr.c @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <stdio.h> +#include <stdlib.h> +#include <stdint.h> +#include <string.h> +#include <sys/fcntl.h> +#include <sys/ioctl.h> +#include <linux/fpga-dfl.h> + +#include "../../kselftest_harness.h" + +TEST(afu_intr) +{ + struct dfl_fpga_port_info port_info; + uint32_t irq_num = UINT32_MAX; + int devfd, status; + + devfd = open("/dev/dfl-port.0", O_RDONLY); + if (devfd < 0) + SKIP(0, "no fpga afu device 0"); + /* + * From fpga-dl.h : + * Currently hardware supports up to 1 irq. + * Return: 0 on success, -errno on failure. + */ + status = ioctl(devfd, DFL_FPGA_PORT_ERR_GET_IRQ_NUM, &irq_num); + ASSERT_EQ(0, status) { + TH_LOG("ioctl() failed to get the number irqs"); + } + ASSERT_LT(irq_num, 256) { + TH_LOG("unexpeced number of irqs"); + } + close(devfd); +} + +TEST_HARNESS_MAIN -- 2.27.0

4 years, 5 months

1
0
0 0

[PATCH v6 00/14] prohibit pinning pages in ZONE_MOVABLE

by Pavel Tatashin

Changelog --------- v6 Small update, but I wanted to send it out quicker, as it removes a controversial patch and replaces it with something sane. - Removed forcing FOLL_WRITE for longterm gup, instead added a patch to skip zero pages during migration. - Added reviewed-by's and minor log changes. v5 - Added the following patches to the beginning of series, which are fixes to the other existing problems with CMA migration code: mm/gup: check every subpage of a compound page during isolation mm/gup: return an error on migration failure mm/gup: check for isolation errors also at the beginning of series mm/gup: do not allow zero page for pinned pages - remove .gfp_mask/.reclaim_idx changes from mm/vmscan.c - update movable zone header comment in patch 8 instead of patch 3, fix the comment - Added acked, sign-offs - Updated commit logs based on feedback - Addressed issues reported by Michal and Jason. - Remove: #define PINNABLE_MIGRATE_MAX 10 #define PINNABLE_ISOLATE_MAX 100 Instead: fail on the first migration failure, and retry isolation forever as their failures are transient. - In self-set addressed some of the comments from John Hubbard, updated commit logs, and added comments. Renamed gup->flags with gup->test_flags. v4 - Address page migration comments. New patch: mm/gup: limit number of gup migration failures, honor failures Implements the limiting number of retries for migration failures, and also check for isolation failures. Added a test case into gup_test to verify that pages never long-term pinned in a movable zone, and also added tests to fault both in kernel and in userland. v3 - Merged with linux-next, which contains clean-up patch from Jason, therefore this series is reduced by two patches which did the same thing. v2 - Addressed all review comments - Added Reviewed-by's. - Renamed PF_MEMALLOC_NOMOVABLE to PF_MEMALLOC_PIN - Added is_pinnable_page() to check if page can be longterm pinned - Fixed gup fast path by checking is_in_pinnable_zone() - rename cma_page_list to movable_page_list - add a admin-guide note about handling pinned pages in ZONE_MOVABLE, updated caveat about pinned pages from linux/mmzone.h - Move current_gfp_context() to fast-path --------- When page is pinned it cannot be moved and its physical address stays the same until pages is unpinned. This is useful functionality to allows userland to implementation DMA access. For example, it is used by vfio in vfio_pin_pages(). However, this functionality breaks memory hotplug/hotremove assumptions that pages in ZONE_MOVABLE can always be migrated. This patch series fixes this issue by forcing new allocations during page pinning to omit ZONE_MOVABLE, and also to migrate any existing pages from ZONE_MOVABLE during pinning. It uses the same scheme logic that is currently used by CMA, and extends the functionality for all allocations. For more information read the discussion [1] about this problem. [1] https://lore.kernel.org/lkml/CA+CK2bBffHBxjmb9jmSKacm0fJMinyt3Nhk8Nx6iudcQS… Previous versions: v1 https://lore.kernel.org/lkml/20201202052330.474592-1-pasha.tatashin@soleen.… v2 https://lore.kernel.org/lkml/20201210004335.64634-1-pasha.tatashin@soleen.c… v3 https://lore.kernel.org/lkml/20201211202140.396852-1-pasha.tatashin@soleen.… v4 https://lore.kernel.org/lkml/20201217185243.3288048-1-pasha.tatashin@soleen… v5 https://lore.kernel.org/lkml/20210119043920.155044-1-pasha.tatashin@soleen.… Pavel Tatashin (14): mm/gup: don't pin migrated cma pages in movable zone mm/gup: check every subpage of a compound page during isolation mm/gup: return an error on migration failure mm/gup: check for isolation errors mm cma: rename PF_MEMALLOC_NOCMA to PF_MEMALLOC_PIN mm: apply per-task gfp constraints in fast path mm: honor PF_MEMALLOC_PIN for all movable pages mm/gup: do not migrate zero page mm/gup: migrate pinned pages out of movable zone memory-hotplug.rst: add a note about ZONE_MOVABLE and page pinning mm/gup: change index type to long as it counts pages mm/gup: longterm pin migration cleaup selftests/vm: test flag is broken selftests/vm: test faulting in kernel, and verify pinnable pages .../admin-guide/mm/memory-hotplug.rst | 9 + include/linux/migrate.h | 1 + include/linux/mm.h | 11 ++ include/linux/mmzone.h | 13 +- include/linux/sched.h | 2 +- include/linux/sched/mm.h | 27 +-- include/trace/events/migrate.h | 3 +- mm/gup.c | 175 ++++++++---------- mm/gup_test.c | 29 +-- mm/gup_test.h | 3 +- mm/hugetlb.c | 4 +- mm/page_alloc.c | 33 ++-- tools/testing/selftests/vm/gup_test.c | 36 +++- 13 files changed, 185 insertions(+), 161 deletions(-) -- 2.25.1

4 years, 5 months

2
22
0 0

[PATCH v7 00/14] prohibit pinning pages in ZONE_MOVABLE

by Pavel Tatashin

Changelog --------- v7 - Added reviewed-by's - Fixed a compile bug on non-mmu builds reported by robot v6 Small update, but I wanted to send it out quicker, as it removes a controversial patch and replaces it with something sane. - Removed forcing FOLL_WRITE for longterm gup, instead added a patch to skip zero pages during migration. - Added reviewed-by's and minor log changes. v5 - Added the following patches to the beginning of series, which are fixes to the other existing problems with CMA migration code: mm/gup: check every subpage of a compound page during isolation mm/gup: return an error on migration failure mm/gup: check for isolation errors also at the beginning of series mm/gup: do not allow zero page for pinned pages - remove .gfp_mask/.reclaim_idx changes from mm/vmscan.c - update movable zone header comment in patch 8 instead of patch 3, fix the comment - Added acked, sign-offs - Updated commit logs based on feedback - Addressed issues reported by Michal and Jason. - Remove: #define PINNABLE_MIGRATE_MAX 10 #define PINNABLE_ISOLATE_MAX 100 Instead: fail on the first migration failure, and retry isolation forever as their failures are transient. - In self-set addressed some of the comments from John Hubbard, updated commit logs, and added comments. Renamed gup->flags with gup->test_flags. v4 - Address page migration comments. New patch: mm/gup: limit number of gup migration failures, honor failures Implements the limiting number of retries for migration failures, and also check for isolation failures. Added a test case into gup_test to verify that pages never long-term pinned in a movable zone, and also added tests to fault both in kernel and in userland. v3 - Merged with linux-next, which contains clean-up patch from Jason, therefore this series is reduced by two patches which did the same thing. v2 - Addressed all review comments - Added Reviewed-by's. - Renamed PF_MEMALLOC_NOMOVABLE to PF_MEMALLOC_PIN - Added is_pinnable_page() to check if page can be longterm pinned - Fixed gup fast path by checking is_in_pinnable_zone() - rename cma_page_list to movable_page_list - add a admin-guide note about handling pinned pages in ZONE_MOVABLE, updated caveat about pinned pages from linux/mmzone.h - Move current_gfp_context() to fast-path --------- When page is pinned it cannot be moved and its physical address stays the same until pages is unpinned. This is useful functionality to allows userland to implementation DMA access. For example, it is used by vfio in vfio_pin_pages(). However, this functionality breaks memory hotplug/hotremove assumptions that pages in ZONE_MOVABLE can always be migrated. This patch series fixes this issue by forcing new allocations during page pinning to omit ZONE_MOVABLE, and also to migrate any existing pages from ZONE_MOVABLE during pinning. It uses the same scheme logic that is currently used by CMA, and extends the functionality for all allocations. For more information read the discussion [1] about this problem. [1] https://lore.kernel.org/lkml/CA+CK2bBffHBxjmb9jmSKacm0fJMinyt3Nhk8Nx6iudcQS… Previous versions: v1 https://lore.kernel.org/lkml/20201202052330.474592-1-pasha.tatashin@soleen.… v2 https://lore.kernel.org/lkml/20201210004335.64634-1-pasha.tatashin@soleen.c… v3 https://lore.kernel.org/lkml/20201211202140.396852-1-pasha.tatashin@soleen.… v4 https://lore.kernel.org/lkml/20201217185243.3288048-1-pasha.tatashin@soleen… v5 https://lore.kernel.org/lkml/20210119043920.155044-1-pasha.tatashin@soleen.… v6 https://lore.kernel.org/lkml/20210120014333.222547-1-pasha.tatashin@soleen.… Pavel Tatashin (14): mm/gup: don't pin migrated cma pages in movable zone mm/gup: check every subpage of a compound page during isolation mm/gup: return an error on migration failure mm/gup: check for isolation errors mm cma: rename PF_MEMALLOC_NOCMA to PF_MEMALLOC_PIN mm: apply per-task gfp constraints in fast path mm: honor PF_MEMALLOC_PIN for all movable pages mm/gup: do not migrate zero page mm/gup: migrate pinned pages out of movable zone memory-hotplug.rst: add a note about ZONE_MOVABLE and page pinning mm/gup: change index type to long as it counts pages mm/gup: longterm pin migration cleanup selftests/vm: test flag is broken selftests/vm: test faulting in kernel, and verify pinnable pages .../admin-guide/mm/memory-hotplug.rst | 9 + include/linux/migrate.h | 1 + include/linux/mm.h | 11 ++ include/linux/mmzone.h | 13 +- include/linux/pgtable.h | 3 +- include/linux/sched.h | 2 +- include/linux/sched/mm.h | 27 +-- include/trace/events/migrate.h | 3 +- mm/gup.c | 176 ++++++++---------- mm/gup_test.c | 29 +-- mm/gup_test.h | 3 +- mm/hugetlb.c | 4 +- mm/page_alloc.c | 33 ++-- tools/testing/selftests/vm/gup_test.c | 36 +++- 14 files changed, 191 insertions(+), 159 deletions(-) -- 2.25.1

4 years, 5 months

2
19
0 0

[PATCH v3] selftests: drivers: fpga: A test for interrupt support

by trix＠redhat.com

From: Tom Rix <trix(a)redhat.com> Check that the ioctl DFL_FPGA_PORT_ERR_GET_IRQ_NUM returns an expected result. Tested on vf device 0xbcc1 Sample run with # make -C tools/testing/selftests TARGETS=drivers/fpga run_tests ... TAP version 13 1..1 # selftests: drivers/fpga: intr # TAP version 13 # 1..1 # # Starting 1 tests from 1 test cases. # # RUN global.afu_intr ... # # OK global.afu_intr # ok 1 global.afu_intr # # PASSED: 1 / 1 tests passed. # # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 1 selftests: drivers/fpga: intr Signed-off-by: Tom Rix <trix(a)redhat.com> --- v1: Convert to kselftest_harness.h framework v2: reverse xmas tree variables --- MAINTAINERS | 1 + tools/testing/selftests/Makefile | 1 + tools/testing/selftests/drivers/fpga/Makefile | 7 ++++ tools/testing/selftests/drivers/fpga/config | 1 + tools/testing/selftests/drivers/fpga/intr.c | 36 +++++++++++++++++++ 5 files changed, 46 insertions(+) create mode 100644 tools/testing/selftests/drivers/fpga/Makefile create mode 100644 tools/testing/selftests/drivers/fpga/config create mode 100644 tools/testing/selftests/drivers/fpga/intr.c diff --git a/MAINTAINERS b/MAINTAINERS index de610a06cb5c..7ed3ce58d95e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6973,6 +6973,7 @@ F: Documentation/driver-api/fpga/ F: Documentation/fpga/ F: drivers/fpga/ F: include/linux/fpga/ +F: tools/testing/selftests/drivers/fpga/ FPGA SECURITY MANAGER DRIVERS M: Russ Weight <russell.h.weight(a)intel.com> diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index afbab4aeef3c..aad4763ec348 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -9,6 +9,7 @@ TARGETS += core TARGETS += cpufreq TARGETS += cpu-hotplug TARGETS += drivers/dma-buf +TARGETS += drivers/fpga TARGETS += efivarfs TARGETS += exec TARGETS += filesystems diff --git a/tools/testing/selftests/drivers/fpga/Makefile b/tools/testing/selftests/drivers/fpga/Makefile new file mode 100644 index 000000000000..eba35c405d5b --- /dev/null +++ b/tools/testing/selftests/drivers/fpga/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0-only +CFLAGS += -I../../../../../usr/include/ +CFLAGS += -I../../../../../include/uapi/ + +TEST_GEN_PROGS := intr + +include ../../lib.mk diff --git a/tools/testing/selftests/drivers/fpga/config b/tools/testing/selftests/drivers/fpga/config new file mode 100644 index 000000000000..e2111b81d8d7 --- /dev/null +++ b/tools/testing/selftests/drivers/fpga/config @@ -0,0 +1 @@ +CONFIG_FPGA_DFL_AFU=m diff --git a/tools/testing/selftests/drivers/fpga/intr.c b/tools/testing/selftests/drivers/fpga/intr.c new file mode 100644 index 000000000000..927dcc757f0b --- /dev/null +++ b/tools/testing/selftests/drivers/fpga/intr.c @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <stdio.h> +#include <stdlib.h> +#include <stdint.h> +#include <string.h> +#include <sys/fcntl.h> +#include <sys/ioctl.h> +#include <linux/fpga-dfl.h> + +#include "../../kselftest_harness.h" + +TEST(afu_intr) +{ + struct dfl_fpga_port_info port_info; + uint32_t irq_num = UINT32_MAX; + int devfd, status; + + devfd = open("/dev/dfl-port.0", O_RDONLY); + if (devfd < 0) + SKIP(0, "no fpga afu device 0"); + /* + * From fpga-dl.h : + * Currently hardware supports up to 1 irq. + * Return: 0 on success, -errno on failure. + */ + status = ioctl(devfd, DFL_FPGA_PORT_ERR_GET_IRQ_NUM, &irq_num); + ASSERT_EQ(0, status) { + TH_LOG("ioctl() failed to get the number irqs"); + } + ASSERT_LT(irq_num, 256) { + TH_LOG("unexpeced number of irqs"); + } + close(devfd); +} + +TEST_HARNESS_MAIN -- 2.27.0

4 years, 5 months

3
2
0 0

[PATCH] x86/sgx: Allows ioctl PROVISION to execute before CREATE

by Tianjia Zhang

In function sgx_encl_create(), the logic of directly assigning value to attributes_mask determines that the call to SGX_IOC_ENCLAVE_PROVISION must be after the command of SGX_IOC_ENCLAVE_CREATE. If change this assignment statement to or operation, the PROVISION command can be executed earlier and more flexibly. Reported-by: Jia Zhang <zhang.jia(a)linux.alibaba.com> Signed-off-by: Tianjia Zhang <tianjia.zhang(a)linux.alibaba.com> --- arch/x86/kernel/cpu/sgx/ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/sgx/ioctl.c b/arch/x86/kernel/cpu/sgx/ioctl.c index f45957c05f69..0ca3fc238bc2 100644 --- a/arch/x86/kernel/cpu/sgx/ioctl.c +++ b/arch/x86/kernel/cpu/sgx/ioctl.c @@ -108,7 +108,7 @@ static int sgx_encl_create(struct sgx_encl *encl, struct sgx_secs *secs) encl->base = secs->base; encl->size = secs->size; encl->attributes = secs->attributes; - encl->attributes_mask = SGX_ATTR_DEBUG | SGX_ATTR_MODE64BIT | SGX_ATTR_KSS; + encl->attributes_mask |= SGX_ATTR_DEBUG | SGX_ATTR_MODE64BIT | SGX_ATTR_KSS; /* Set only after completion, as encl->lock has not been taken. */ set_bit(SGX_ENCL_CREATED, &encl->flags); -- 2.19.1.3.ge56e4f7

4 years, 5 months

3
6
0 0

[GIT PULL] KUnit update for Linux 5.11-rc5

by Shuah Khan

Hi Linus, Please pull the following KUnit fixes update for Linux 5.11-rc5. This KUnit update for Linux 5.11-rc5 consists of 5 fixes to kunit tool and documentation from Daniel Latypov and David Gow. diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit 65a4e5299739abe0888cda0938d21f8ea3b5c606: kunit: tool: Force the use of the 'tty' console for UML (2021-01-04 09:18:38 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux-kselftest-kunit-fixes-5.11-rc5 for you to fetch changes up to 2b8fdbbf1c616300312f71fe5b21fe8f03129950: kunit: tool: move kunitconfig parsing into __init__, make it optional (2021-01-15 17:52:12 -0700) ---------------------------------------------------------------- linux-kselftest-kunit-fixes-5.11-rc5 This KUnit update for Linux 5.11-rc5 consist of 5 fixes to kunit tool and documentation from Daniel Latypov and David Gow. ---------------------------------------------------------------- Daniel Latypov (4): Documentation: kunit: include example of a parameterized test kunit: tool: surface and address more typing issues kunit: tool: fix minor typing issue with None status kunit: tool: move kunitconfig parsing into __init__, make it optional David Gow (1): kunit: tool: Fix spelling of "diagnostic" in kunit_parser Documentation/dev-tools/kunit/usage.rst | 57 +++++++++++++++++++++++ tools/testing/kunit/kunit.py | 34 +++++--------- tools/testing/kunit/kunit_config.py | 7 +-- tools/testing/kunit/kunit_json.py | 2 +- tools/testing/kunit/kunit_kernel.py | 54 +++++++++++----------- tools/testing/kunit/kunit_parser.py | 81 ++++++++++++++++----------------- 6 files changed, 141 insertions(+), 94 deletions(-) ----------------------------------------------------------------

4 years, 5 months

2
1
0 0

[PATCH net-next v2 0/2] Add nci suit and virtual nci device driver

by Bongsu Jeon

From: Bongsu Jeon <bongsu.jeon(a)samsung.com> A NCI virtual device can be made to simulate a NCI device in user space. Using the virtual NCI device, The NCI module and application can be validated. This driver supports to communicate between the virtual NCI device and NCI module. To test the basic features of NCI module, selftest for NCI is added. Test cases consist of making the virtual NCI device on/off and controlling the device's polling for NCI1.0 and NCI2.0 version. 1/2 is the Virtual NCI device driver. 2/2 is the NCI selftest suite v2: 1/2 - change the permission of the Virtual NCI device. - add the ioctl to find the nci device index. 2/2 - add the NCI selftest suite. Bongsu Jeon (2): nfc: Add a virtual nci device driver selftests: Add nci suite MAINTAINERS | 8 + drivers/nfc/Kconfig | 11 + drivers/nfc/Makefile | 1 + drivers/nfc/virtual_ncidev.c | 235 ++++++++++ tools/testing/selftests/Makefile | 1 + tools/testing/selftests/nci/Makefile | 6 + tools/testing/selftests/nci/config | 3 + tools/testing/selftests/nci/nci_dev.c | 599 ++++++++++++++++++++++++++ 8 files changed, 864 insertions(+) create mode 100644 drivers/nfc/virtual_ncidev.c create mode 100644 tools/testing/selftests/nci/Makefile create mode 100644 tools/testing/selftests/nci/config create mode 100644 tools/testing/selftests/nci/nci_dev.c -- 2.25.1

4 years, 5 months

2
3
0 0

[PATCH v2 bpf-next 0/4] libbpf: BTF dumper support for typed data

by Alan Maguire

Add a libbpf dumper function that supports dumping a representation of data passed in using the BTF id associated with the data in a manner similar to the bpf_snprintf_btf helper. Default output format is identical to that dumped by bpf_snprintf_btf(), for example a "struct sk_buff" representation would look like this: struct sk_buff){ (union){ (struct){ .next = (struct sk_buff *)0xffffffffffffffff, .prev = (struct sk_buff *)0xffffffffffffffff, (union){ .dev = (struct net_device *)0xffffffffffffffff, .dev_scratch = (long unsigned int)18446744073709551615, }, }, ... Patches 1 and 2 make functions available that are needed during dump operations. Patch 3 implements the dump functionality in a manner similar to that in kernel/bpf/btf.c, but with a view to fitting into libbpf more naturally. For example, rather than using flags, boolean dump options are used to control output. Patch 4 is a selftest that utilizes a dump printf function to snprintf the dump output to a string for comparison with expected output. Tests deliberately mirror those in snprintf_btf helper test to keep output consistent. Changes since RFC [1] - The initial approach explored was to share the kernel code with libbpf using #defines to paper over the different needs; however it makes more sense to try and fit in with libbpf code style for maintenance. A comment in the code points at the implementation in kernel/bpf/btf.c and notes that any issues found in it should be fixed there or vice versa; mirroring the tests should help with this also (Andrii) [1] https://lore.kernel.org/bpf/1610386373-24162-1-git-send-email-alan.maguire@… Alan Maguire (4): libbpf: add btf_has_size() and btf_int() inlines libbpf: make skip_mods_and_typedefs available internally in libbpf libbpf: BTF dumper support for typed data selftests/bpf: add dump type data tests to btf dump tests tools/lib/bpf/btf.h | 36 + tools/lib/bpf/btf_dump.c | 974 ++++++++++++++++++++++ tools/lib/bpf/libbpf.c | 4 +- tools/lib/bpf/libbpf.map | 5 + tools/lib/bpf/libbpf_internal.h | 2 + tools/testing/selftests/bpf/prog_tests/btf_dump.c | 233 ++++++ 6 files changed, 1251 insertions(+), 3 deletions(-) -- 1.8.3.1

4 years, 5 months

2
11
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror