- Linux-kselftest-mirror - lists.linaro.org

Re: [PATCH 5.17 000/772] 5.17.14-rc1 review

by Naresh Kamboju

On Tue, 7 Jun 2022 at 23:41, Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> wrote: > > This is the start of the stable review cycle for the 5.17.14 release. > There are 772 patches in this series, all will be posted as a response > to this one. If anyone has any issues with these being applied, please > let me know. > > Responses should be made by Thu, 09 Jun 2022 16:48:02 +0000. > Anything received after that time might be too late. > > The whole patch series can be found in one patch at: > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.17.14-rc… > or in the git tree and branch at: > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.17.y > and the diffstat can be found below. > > thanks, > > greg k-h Results from Linaro’s test farm. Regressions found on qemu_x86_64: - kunit/kasan [1] Regressions found on qemu_i386: - kunit/kfence [2] - kunit/test_out_of_bounds_read We will bisect and let you know more details about this reported problem. Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> [1] https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.17.y/build/v5.17… [2] https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.17.y/build/v5.17… ## Build * kernel: 5.17.14-rc1 * git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc * git branch: linux-5.17.y * git commit: d0f9b2818e1e4d43847e10d6e5310a0c653cb18f * git describe: v5.17.13-773-gd0f9b2818e1e * test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.17.y/build/v5.17… ## Test Regressions (compared to v5.17.11-188-g8eb69e8f0d45) Regressions found on qemu_x86_64: - kunit/kasan [1] Regressions found on qemu_i386: - kunit/kfence [2] - kunit/test_out_of_bounds_read ## Metric Regressions (compared to v5.17.11-188-g8eb69e8f0d45) No metric regressions found. ## Test Fixes (compared to v5.17.11-188-g8eb69e8f0d45) No test fixes found. ## Metric Fixes (compared to v5.17.11-188-g8eb69e8f0d45) No metric fixes found. ## Test result summary total: 134591, pass: 121555, fail: 447, skip: 11730, xfail: 859 ## Build Summary * arm: 17 total, 14 passed, 3 failed * arm64: 20 total, 20 passed, 0 failed * i386: 17 total, 12 passed, 5 failed * mips: 4 total, 1 passed, 3 failed * parisc: 2 total, 2 passed, 0 failed * powerpc: 5 total, 2 passed, 3 failed * riscv: 5 total, 5 passed, 0 failed * s390: 5 total, 2 passed, 3 failed * sh: 2 total, 0 passed, 2 failed * sparc: 2 total, 2 passed, 0 failed * x86_64: 20 total, 20 passed, 0 failed ## Test suites summary * fwts * kunit * kvm-unit-tests * libgpiod * libhugetlbfs * log-parser-boot * log-parser-test * ltp-cap_bounds * ltp-cap_bounds-tests * ltp-commands * ltp-commands-tests * ltp-containers * ltp-containers-tests * ltp-controllers-tests * ltp-cpuhotplug-tests * ltp-crypto * ltp-crypto-tests * ltp-cve-tests * ltp-dio-tests * ltp-fcntl-locktests * ltp-fcntl-locktests-tests * ltp-filecaps * ltp-filecaps-tests * ltp-fs * ltp-fs-tests * ltp-fs_bind * ltp-fs_bind-tests * ltp-fs_perms_simple * ltp-fs_perms_simple-tests * ltp-fsx * ltp-fsx-tests * ltp-hugetlb * ltp-hugetlb-tests * ltp-io * ltp-io-tests * ltp-ipc * ltp-ipc-tests * ltp-math-tests * ltp-mm-tests * ltp-nptl * ltp-nptl-tests * ltp-open-posix-tests * ltp-pty * ltp-pty-tests * ltp-sched-tests * ltp-securebits * ltp-securebits-tests * ltp-syscalls-tests * ltp-tracing-tests * network-basic-tests * packetdrill * perf * rcutorture * ssuite * v4l2-compliance * vdso -- Linaro LKFT https://lkft.linaro.org

3 years, 2 months

6
8
0 0

[PATCH bpf-next] selftests/bpf: Enable config options needed for xdp_synproxy test

by Maxim Mikityanskiy

This commit adds the kernel config options needed to run the recently added xdp_synproxy test. Users without these options will hit errors like this: test_synproxy:FAIL:iptables -t raw -I PREROUTING -i tmp1 -p tcp -m tcp --syn --dport 8080 -j CT --notrack unexpected error: 256 (errno 22) Signed-off-by: Maxim Mikityanskiy <maximmi(a)nvidia.com> Suggested-by: Alexei Starovoitov <alexei.starovoitov(a)gmail.com> --- tools/testing/selftests/bpf/config | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/tools/testing/selftests/bpf/config b/tools/testing/selftests/bpf/config index 3b3edc0fc8a6..c05904d631ec 100644 --- a/tools/testing/selftests/bpf/config +++ b/tools/testing/selftests/bpf/config @@ -57,3 +57,9 @@ CONFIG_FPROBE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_MPTCP=y +CONFIG_NETFILTER_SYNPROXY=y +CONFIG_NETFILTER_XT_TARGET_CT=y +CONFIG_NETFILTER_XT_MATCH_STATE=y +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_SYNPROXY=y +CONFIG_IP_NF_RAW=y -- 2.30.2

3 years, 2 months

2
1
0 0

[PATCH 0/5] Rework KUnit test execution in modules

by David Gow

This patch series makes two changes to how KUnit test suites are stored and executed: - The .kunit_test_suites section is now used for tests in modules (in lieu of a module_init funciton), as well as for built-in tests. The module loader will now trigger test execution. This frees up the module_init function for other uses. - Instead of storing an array of arrays of suites, have the kunit_test_suite() and kunit_test_suites() macros append to one global (or per-module) list of test suites. This removes a needless layer of indirection. The upshot of this is that it should now be possible to use the kunit_test_suite() and kunit_test_suites() macros to register test suites even from within modules which otherwise had module_init functions. This was proving to be quite a common issue, resulting in several modules calling into KUnit's private suite execution functions to run their tests (often introducing incompatibilities with the KUnit tooling). This series also fixes the thunderbolt, nitro_enclaves, and sdhci-of-aspeed tests to use kunit_test_suite() now that it works. Huge thanks to Jeremy Kerr, who designed and implemented the module loader changes, and to Daniel Latypov for pushing the simplification of the nested arrays in .kunit_test_suites. I've tested this series both with builtin tests, and with modules on x86_64, but there's always the possibility that there's something subtle and nasty on another architecture, so please test! Cheers, -- David Daniel Latypov (1): kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites David Gow (3): thunderbolt: test: Use kunit_test_suite() macro nitro_enclaves: test: Use kunit_test_suite() macro mmc: sdhci-of-aspeed: test: Use kunit_test_suite() macro Jeremy Kerr (1): kunit: unify module and builtin suite definitions drivers/mmc/host/Kconfig | 5 +- drivers/mmc/host/sdhci-of-aspeed-test.c | 8 +- drivers/mmc/host/sdhci-of-aspeed.c | 27 ---- drivers/thunderbolt/Kconfig | 5 +- drivers/thunderbolt/domain.c | 3 - drivers/thunderbolt/tb.h | 8 - drivers/thunderbolt/test.c | 12 +- drivers/virt/nitro_enclaves/Kconfig | 5 +- drivers/virt/nitro_enclaves/ne_misc_dev.c | 27 ---- .../virt/nitro_enclaves/ne_misc_dev_test.c | 5 +- include/kunit/test.h | 60 ++------ include/linux/module.h | 5 + kernel/module/main.c | 6 + lib/kunit/executor.c | 117 ++++----------- lib/kunit/executor_test.c | 139 +++++------------- lib/kunit/test.c | 54 ++++++- 16 files changed, 152 insertions(+), 334 deletions(-) -- 2.36.1.476.g0c4daa206d-goog

3 years, 2 months

6
13
0 0

[PATCH v2 net] ipv4: fix bind address validity regression tests

by Riccardo Paolo Bestetti

Commit 8ff978b8b222 ("ipv4/raw: support binding to nonlocal addresses") introduces support for binding to nonlocal addresses, as well as some basic test coverage for some of the related cases. Commit b4a028c4d031 ("ipv4: ping: fix bind address validity check") fixes a regression which incorrectly removed some checks for bind address validation. In addition, it introduces regression tests for those specific checks. However, those regression tests are defective, in that they perform the tests using an incorrect combination of bind flags. As a result, those tests fail when they should succeed. This commit introduces additional regression tests for nonlocal binding and fixes the defective regression tests. It also introduces new set_sysctl calls for the ipv4_bind test group, as to perform the ICMP binding tests it is necessary to allow ICMP socket creation by setting the net.ipv4.ping_group_range knob. Fixes: b4a028c4d031 ("ipv4: ping: fix bind address validity check") Reported-by: Riccardo Paolo Bestetti <pbl(a)bestov.io> Signed-off-by: Riccardo Paolo Bestetti <pbl(a)bestov.io> --- This has been tested on the net tree (@ b4a028c4d031) w/ the following: $ cd $KERNEL_TREE/tools/testing/selftests/net $ make nettest # PATH=$PATH:./ ./fcnal-test.sh -t ipv4_bind -v All tests, including the previously broken ones and the new tests, pass with the expected results. tools/testing/selftests/net/fcnal-test.sh | 36 +++++++++++++++++------ 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index 75223b63e3c8..03b586760164 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -1800,24 +1800,32 @@ ipv4_addr_bind_novrf() done # - # raw socket with nonlocal bind + # tests for nonlocal bind # a=${NL_IP} log_start - run_cmd nettest -s -R -P icmp -f -l ${a} -I ${NSA_DEV} -b - log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address after device bind" + run_cmd nettest -s -R -f -l ${a} -b + log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address" + + log_start + run_cmd nettest -s -f -l ${a} -b + log_test_addr ${a} $? 0 "TCP socket bind to nonlocal address" + + log_start + run_cmd nettest -s -D -P icmp -f -l ${a} -b + log_test_addr ${a} $? 0 "ICMP socket bind to nonlocal address" # # check that ICMP sockets cannot bind to broadcast and multicast addresses # a=${BCAST_IP} log_start - run_cmd nettest -s -R -P icmp -l ${a} -b + run_cmd nettest -s -D -P icmp -l ${a} -b log_test_addr ${a} $? 1 "ICMP socket bind to broadcast address" a=${MCAST_IP} log_start - run_cmd nettest -s -R -P icmp -f -l ${a} -b + run_cmd nettest -s -D -P icmp -l ${a} -b log_test_addr ${a} $? 1 "ICMP socket bind to multicast address" # @@ -1870,24 +1878,32 @@ ipv4_addr_bind_vrf() log_test_addr ${a} $? 1 "Raw socket bind to out of scope address after VRF bind" # - # raw socket with nonlocal bind + # tests for nonlocal bind # a=${NL_IP} log_start - run_cmd nettest -s -R -P icmp -f -l ${a} -I ${VRF} -b + run_cmd nettest -s -R -f -l ${a} -I ${VRF} -b log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address after VRF bind" + log_start + run_cmd nettest -s -f -l ${a} -I ${VRF} -b + log_test_addr ${a} $? 0 "TCP socket bind to nonlocal address after VRF bind" + + log_start + run_cmd nettest -s -D -P icmp -f -l ${a} -I ${VRF} -b + log_test_addr ${a} $? 0 "ICMP socket bind to nonlocal address after VRF bind" + # # check that ICMP sockets cannot bind to broadcast and multicast addresses # a=${BCAST_IP} log_start - run_cmd nettest -s -R -P icmp -l ${a} -I ${VRF} -b + run_cmd nettest -s -D -P icmp -l ${a} -I ${VRF} -b log_test_addr ${a} $? 1 "ICMP socket bind to broadcast address after VRF bind" a=${MCAST_IP} log_start - run_cmd nettest -s -R -P icmp -f -l ${a} -I ${VRF} -b + run_cmd nettest -s -D -P icmp -l ${a} -I ${VRF} -b log_test_addr ${a} $? 1 "ICMP socket bind to multicast address after VRF bind" # @@ -1922,10 +1938,12 @@ ipv4_addr_bind() log_subsection "No VRF" setup + set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null ipv4_addr_bind_novrf log_subsection "With VRF" setup "yes" + set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null ipv4_addr_bind_vrf } -- 2.36.1

3 years, 2 months

2
1
0 0

[PATCH 00/10] drm: selftest: Convert to KUnit

by Maíra Canal

KUnit unifies the test structure and provides helper tools that simplify the development of tests. The basic use case allows running tests as regular processes, which makes it easier to run unit tests on a development machine and to integrate the tests into a CI system. That said, the conversion of selftests for DRM to KUnit tests is beneficial as it unifies the testing API by using the KUnit API. KUnit is beneficial for developers as it eases the process to run unit tests. It is possible to run the tests by using the kunit-tool on userspace with the following command: ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/gpu/drm/tests --arch=x86_64 For CI system, it is possible to execute during the build. But, we also think about IGT: we are developing a patch to introduce KUnit to IGT. These patches were developed during a KUnit hackathon [0] last October. Now, we believe that both the IGT side and the Kernel side are in good shape for submission. If you are willing to check the output, here is the Pastebin with the output and execution times [1]. [0] https://groups.google.com/g/kunit-dev/c/YqFR1q2uZvk/m/IbvItSfHBAAJ [1] https://pastebin.com/FJjLPKsC - Arthur Grillo, Isabella Basso, and Maíra Canal Arthur Grillo (2): drm: selftest: refactor drm_cmdline_parser drm: selftest: convert drm_mm selftest to KUnit Maíra Canal (8): drm: selftest: convert drm_damage_helper selftest to KUnit drm: selftest: convert drm_cmdline_parser selftest to KUnit drm: selftest: convert drm_rect selftest to KUnit drm: selftest: convert drm_format selftest to KUnit drm: selftest: convert drm_plane_helper selftest to KUnit drm: selftest: convert drm_dp_mst_helper selftest to KUnit drm: selftest: convert drm_framebuffer selftest to KUnit drm: selftest: convert drm_buddy selftest to KUnit drivers/gpu/drm/Kconfig | 20 +- drivers/gpu/drm/Makefile | 2 +- drivers/gpu/drm/selftests/Makefile | 8 - .../gpu/drm/selftests/drm_buddy_selftests.h | 15 - .../gpu/drm/selftests/drm_cmdline_selftests.h | 68 - drivers/gpu/drm/selftests/drm_mm_selftests.h | 28 - .../gpu/drm/selftests/drm_modeset_selftests.h | 40 - drivers/gpu/drm/selftests/drm_selftest.c | 109 -- drivers/gpu/drm/selftests/drm_selftest.h | 41 - drivers/gpu/drm/selftests/test-drm_buddy.c | 994 -------------- .../drm/selftests/test-drm_cmdline_parser.c | 1141 ----------------- .../drm/selftests/test-drm_damage_helper.c | 667 ---------- drivers/gpu/drm/selftests/test-drm_format.c | 280 ---- .../drm/selftests/test-drm_modeset_common.c | 32 - .../drm/selftests/test-drm_modeset_common.h | 52 - drivers/gpu/drm/tests/.kunitconfig | 3 + drivers/gpu/drm/tests/Kconfig | 130 ++ drivers/gpu/drm/tests/Makefile | 10 + drivers/gpu/drm/tests/test-drm_buddy.c | 748 +++++++++++ .../gpu/drm/tests/test-drm_cmdline_parser.c | 799 ++++++++++++ .../gpu/drm/tests/test-drm_damage_helper.c | 633 +++++++++ .../test-drm_dp_mst_helper.c | 82 +- drivers/gpu/drm/tests/test-drm_format.c | 284 ++++ .../test-drm_framebuffer.c | 25 +- .../drm/{selftests => tests}/test-drm_mm.c | 1135 +++++++--------- .../test-drm_plane_helper.c | 101 +- .../drm/{selftests => tests}/test-drm_rect.c | 124 +- 27 files changed, 3240 insertions(+), 4331 deletions(-) delete mode 100644 drivers/gpu/drm/selftests/Makefile delete mode 100644 drivers/gpu/drm/selftests/drm_buddy_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_cmdline_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_mm_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_modeset_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_selftest.c delete mode 100644 drivers/gpu/drm/selftests/drm_selftest.h delete mode 100644 drivers/gpu/drm/selftests/test-drm_buddy.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_cmdline_parser.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_damage_helper.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_format.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_modeset_common.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_modeset_common.h create mode 100644 drivers/gpu/drm/tests/.kunitconfig create mode 100644 drivers/gpu/drm/tests/Kconfig create mode 100644 drivers/gpu/drm/tests/Makefile create mode 100644 drivers/gpu/drm/tests/test-drm_buddy.c create mode 100644 drivers/gpu/drm/tests/test-drm_cmdline_parser.c create mode 100644 drivers/gpu/drm/tests/test-drm_damage_helper.c rename drivers/gpu/drm/{selftests => tests}/test-drm_dp_mst_helper.c (73%) create mode 100644 drivers/gpu/drm/tests/test-drm_format.c rename drivers/gpu/drm/{selftests => tests}/test-drm_framebuffer.c (96%) rename drivers/gpu/drm/{selftests => tests}/test-drm_mm.c (58%) rename drivers/gpu/drm/{selftests => tests}/test-drm_plane_helper.c (62%) rename drivers/gpu/drm/{selftests => tests}/test-drm_rect.c (53%) -- 2.36.1

3 years, 2 months

5
16
0 0

[RFC PATCH] selftests/vm: enable running select groups of tests

by Joel Savitz

Add the ability to run one or more groups of vm tests (specified by the environment variable TEST_ITEMS). Preserve existing default behavior of running all tests when TEST_ITEMS is empty or "default". Documentation of test groups is included in the patch as follows: # ./run_vmtests.sh [ -h || --help ] usage: ./tools/testing/selftests/vm/run_vmtests.sh [ -h ] -h: display this message The default behavior is to run all tests. Alternatively, specific groups tests can be run by defining the TEST_ITEMS shell variable with a space-separated string of one or more of the following: - mmap tests for mmap(2) - gup_test tests for gup using gup_test interface - userfaultfd tests for userfaultfd(2) - compaction a test for the patch "Allow compaction of unevictable pages" - mlock tests for mlock(2) - mremap tests for mremap(2) - hugevm tests for very large virtual address space - vmalloc vmalloc smoke tests - hmm hmm smoke tests - madv_populate test memadvise(2) MADV_POPULATE_{READ,WRITE} options - memfd_secret test memfd_secret(2) - process_mrelease test process_mrelease(2) - ksm ksm tests that do not require >=2 NUMA nodes - ksm_numa ksm tests that require >=2 NUMA nodes example: TEST_ITEMS="hmm mmap ksm" ./run_vmtests.sh Signed-off-by: Joel Savitz <jsavitz(a)redhat.com> --- tools/testing/selftests/vm/run_vmtests.sh | 224 +++++++++++++++------- 1 file changed, 150 insertions(+), 74 deletions(-) diff --git a/tools/testing/selftests/vm/run_vmtests.sh b/tools/testing/selftests/vm/run_vmtests.sh index 41fce8bea929..d31fc66205f8 100755 --- a/tools/testing/selftests/vm/run_vmtests.sh +++ b/tools/testing/selftests/vm/run_vmtests.sh @@ -1,22 +1,74 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -#please run as root +# Please run as root # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 mnt=./huge exitcode=0 - -#get huge pagesize and freepages from /proc/meminfo -while read -r name size unit; do - if [ "$name" = "HugePages_Free:" ]; then - freepgs="$size" - fi - if [ "$name" = "Hugepagesize:" ]; then - hpgsize_KB="$size" +nr_tests_ran=0 + +if [ ${1:-0} == "-h" ] || [ ${1:-0} == "--help" ] +then + cat <<EOF +usage: ${BASH_SOURCE[0]:-$0} [ -h ] + -h: display this message + +The default behavior is to run all tests. + +Alternatively, specific groups tests can be run by defining +the TEST_ITEMS shell variable with a space-separated string +of one or more of the following: +- mmap + tests for mmap(2) +- gup_test + tests for gup using gup_test interface +- userfaultfd + tests for userfaultfd(2) +- compaction + a test for the patch "Allow compaction of unevictable pages" +- mlock + tests for mlock(2) +- mremap + tests for mremap(2) +- hugevm + tests for very large virtual address space +- vmalloc + vmalloc smoke tests +- hmm + hmm smoke tests +- madv_populate + test memadvise(2) MADV_POPULATE_{READ,WRITE} options +- memfd_secret + test memfd_secret(2) +- process_mrelease + test process_mrelease(2) +- ksm + ksm tests that do not require >=2 NUMA nodes +- ksm_numa + ksm tests that require >=2 NUMA nodes +example: TEST_ITEMS="hmm mmap ksm" ./run_vmtests.sh +EOF + exit 0 +fi # $1 == -h || $1 == --help + +# default behavior: run all tests +TEST_ITEMS=${TEST_ITEMS:-default} + +echo "Selected test items: ${TEST_ITEMS}" + +test_selected() { + if [ "$TEST_ITEMS" == "default" ]; then + # If no TEST_ITEMS are specified, run all tests + return 0 fi -done < /proc/meminfo + echo ${TEST_ITEMS} | grep ${1} 2>&1 >/dev/null + return ${?} +} + +# Hugepage setup only needed for hugetlb tests +if test_selected "hugetlb"; then # Simple hugetlbfs tests have a hardcoded minimum requirement of # huge pages totaling 256MB (262144KB) in size. The userfaultfd @@ -28,7 +80,17 @@ hpgsize_MB=$((hpgsize_KB / 1024)) half_ufd_size_MB=$((((nr_cpus * hpgsize_MB + 127) / 128) * 128)) needmem_KB=$((half_ufd_size_MB * 2 * 1024)) -#set proper nr_hugepages +# get huge pagesize and freepages from /proc/meminfo +while read -r name size unit; do + if [ "$name" = "HugePages_Free:" ]; then + freepgs="$size" + fi + if [ "$name" = "Hugepagesize:" ]; then + hpgsize_KB="$size" + fi +done < /proc/meminfo + +# set proper nr_hugepages if [ -n "$freepgs" ] && [ -n "$hpgsize_KB" ]; then nr_hugepgs=$(cat /proc/sys/vm/nr_hugepages) needpgs=$((needmem_KB / hpgsize_KB)) @@ -57,126 +119,140 @@ else exit 1 fi -#filter 64bit architectures +fi # test_selected "hugetlb" + +# filter 64bit architectures ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64" if [ -z "$ARCH" ]; then ARCH=$(uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/') fi VADDR64=0 -echo "$ARCH64STR" | grep "$ARCH" && VADDR64=1 +echo "$ARCH64STR" | grep "$ARCH" &>/dev/null && VADDR64=1 # Usage: run_test [test binary] [arbitrary test arguments...] run_test() { - local title="running $*" - local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -) - printf "%s\n%s\n%s\n" "$sep" "$title" "$sep" - - "$@" - local ret=$? - if [ $ret -eq 0 ]; then - echo "[PASS]" - elif [ $ret -eq $ksft_skip ]; then - echo "[SKIP]" - exitcode=$ksft_skip - else - echo "[FAIL]" - exitcode=1 - fi + if test_selected ${CATEGORY}; then + local title="running $*" + local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -) + printf "%s\n%s\n%s\n" "$sep" "$title" "$sep" + + "$@" + local ret=$? + if [ $ret -eq 0 ]; then + echo "[PASS]" + elif [ $ret -eq $ksft_skip ]; then + echo "[SKIP]" + exitcode=$ksft_skip + else + echo "[FAIL]" + exitcode=1 + fi + nr_tests_ran=$((nr_tests_ran + 1)) + fi # test_selected } -mkdir "$mnt" -mount -t hugetlbfs none "$mnt" +# setup only needed for hugetlb tests +if test_selected "hugetlb"; then + mkdir "$mnt" + mount -t hugetlbfs none "$mnt" +fi -run_test ./hugepage-mmap +CATEGORY="hugetlb" run_test ./hugepage-mmap shmmax=$(cat /proc/sys/kernel/shmmax) shmall=$(cat /proc/sys/kernel/shmall) echo 268435456 > /proc/sys/kernel/shmmax echo 4194304 > /proc/sys/kernel/shmall -run_test ./hugepage-shm +CATEGORY="hugetlb" run_test ./hugepage-shm echo "$shmmax" > /proc/sys/kernel/shmmax echo "$shmall" > /proc/sys/kernel/shmall -run_test ./map_hugetlb +CATEGORY="hugetlb" run_test ./map_hugetlb -run_test ./hugepage-mremap "$mnt"/huge_mremap -rm -f "$mnt"/huge_mremap +CATEGORY="hugetlb" run_test ./hugepage-mremap "$mnt"/huge_mremap +test_selected "hugetlb" && rm -f "$mnt"/huge_mremap -run_test ./hugepage-vmemmap +CATEGORY="hugetlb" run_test ./hugepage-vmemmap -run_test ./hugetlb-madvise "$mnt"/madvise-test -rm -f "$mnt"/madvise-test +CATEGORY="hugetlb" run_test ./hugetlb-madvise "$mnt"/madvise-test +test_selected "hugetlb" && rm -f "$mnt"/madvise-test -echo "NOTE: The above hugetlb tests provide minimal coverage. Use" -echo " https://github.com/libhugetlbfs/libhugetlbfs.git for" -echo " hugetlb regression testing." +if test_selected "hugetlb"; then + echo "NOTE: These hugetlb tests provide minimal coverage. Use" + echo " https://github.com/libhugetlbfs/libhugetlbfs.git for" + echo " hugetlb regression testing." +fi -run_test ./map_fixed_noreplace +CATEGORY="mmap" run_test ./map_fixed_noreplace # get_user_pages_fast() benchmark -run_test ./gup_test -u +CATEGORY="gup_test" run_test ./gup_test -u # pin_user_pages_fast() benchmark -run_test ./gup_test -a +CATEGORY="gup_test" run_test ./gup_test -a # Dump pages 0, 19, and 4096, using pin_user_pages: -run_test ./gup_test -ct -F 0x1 0 19 0x1000 +CATEGORY="gup_test" run_test ./gup_test -ct -F 0x1 0 19 0x1000 -run_test ./userfaultfd anon 20 16 +CATEGORY="userfaultfd" run_test ./userfaultfd anon 20 16 # Test requires source and destination huge pages. Size of source # (half_ufd_size_MB) is passed as argument to test. -run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32 -run_test ./userfaultfd shmem 20 16 - -#cleanup -umount "$mnt" -rm -rf "$mnt" -echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32 +CATEGORY="userfaultfd" run_test ./userfaultfd shmem 20 16 + +# cleanup (only needed when running hugetlb tests) +if test_selected "hugetlb"; then + umount "$mnt" + rm -rf "$mnt" + echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages +fi -run_test ./compaction_test +CATEGORY="compaction" run_test ./compaction_test -run_test sudo -u nobody ./on-fault-limit +CATEGORY="mlock" run_test sudo -u nobody ./on-fault-limit -run_test ./map_populate +CATEGORY="mmap" run_test ./map_populate -run_test ./mlock-random-test +CATEGORY="mlock" run_test ./mlock-random-test -run_test ./mlock2-tests +CATEGORY="mlock" run_test ./mlock2-tests -run_test ./mrelease_test +CATEGORY="process_mrelease" run_test ./mrelease_test -run_test ./mremap_test +CATEGORY="mremap" run_test ./mremap_test -run_test ./thuge-gen +CATEGORY="hugetlb" run_test ./thuge-gen if [ $VADDR64 -ne 0 ]; then - run_test ./virtual_address_range + CATEGORY="hugevm" run_test ./virtual_address_range # virtual address 128TB switch test - run_test ./va_128TBswitch + CATEGORY="hugevm" run_test ./va_128TBswitch fi # VADDR64 # vmalloc stability smoke test -run_test ./test_vmalloc.sh smoke +CATEGORY="vmalloc" run_test ./test_vmalloc.sh smoke -run_test ./mremap_dontunmap +CATEGORY="mremap" run_test ./mremap_dontunmap -run_test ./test_hmm.sh smoke +CATEGORY="hmm" run_test ./test_hmm.sh smoke # MADV_POPULATE_READ and MADV_POPULATE_WRITE tests -run_test ./madv_populate +CATEGORY="madv_populate" run_test ./madv_populate -run_test ./memfd_secret +CATEGORY="memfd_secret" run_test ./memfd_secret # KSM MADV_MERGEABLE test with 10 identical pages -run_test ./ksm_tests -M -p 10 +CATEGORY="ksm" run_test ./ksm_tests -M -p 10 # KSM unmerge test -run_test ./ksm_tests -U +CATEGORY="ksm" run_test ./ksm_tests -U # KSM test with 10 zero pages and use_zero_pages = 0 -run_test ./ksm_tests -Z -p 10 -z 0 +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 0 # KSM test with 10 zero pages and use_zero_pages = 1 -run_test ./ksm_tests -Z -p 10 -z 1 +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 1 # KSM test with 2 NUMA nodes and merge_across_nodes = 1 -run_test ./ksm_tests -N -m 1 +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 1 # KSM test with 2 NUMA nodes and merge_across_nodes = 0 -run_test ./ksm_tests -N -m 0 +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 0 + +echo "Ran $nr_tests_ran tests" exit $exitcode -- 2.31.1

3 years, 2 months

2
1
0 0

[RFC PATCH net] ipv4: fix bind address validity regression tests

by Riccardo Paolo Bestetti

Commit 8ff978b8b222 ("ipv4/raw: support binding to nonlocal addresses") introduced support for binding to nonlocal addresses, as well as some basic test coverage for some of the cases. Commit b4a028c4d031 ("ipv4: ping: fix bind address validity check") fixes a regression which incorrectly removed some checks for bind address validation. In addition, it introduces regression tests for those specific checks. However, those regression tests are defective, in that they perform the tests using an incorrect combination of bind flags. As a result, those tests fail when they should succeed. This commit introduces additional regression tests for nonlocal binding and fixes the defective regression tests. PLEASE NOTE THAT THIS PATCH SHOULD NOT BE APPLIED AS-IS. The ICMP broadcast and multicast regression tests succeed, but they do so while returning the wrong error status. In particular, it isn't the bind that fails, but the socket creation. This is /not/ correct, and it must be investigated to have proper regression testing. Other instances where this happens are: 1) if the broadcast/multicast addresses are replace with an allowed (e.g. local) address (bind should work, but socket is never created in the first place); 2) the commented out tests (nonlocal bind should work but ditto.) Additionally, please note that when the test cases are manually (i.e. without the network namespace setup from fcnal-test.sh) ran, the expected/correct outcome is observed. The reason I'm submitting this patch for comments, is that I'm failing to understand where the issue lies. (Disclamer: might be something stupid/trivial that I'm plainly missing due to tunnel vision.) Signed-off-by: Riccardo Paolo Bestetti <pbl(a)bestov.io> --- tools/testing/selftests/net/fcnal-test.sh | 36 +++++++++++++++++------ 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index 75223b63e3c8..778288539879 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -1800,24 +1800,33 @@ ipv4_addr_bind_novrf() done # - # raw socket with nonlocal bind + # tests for nonlocal bind # a=${NL_IP} log_start - run_cmd nettest -s -R -P icmp -f -l ${a} -I ${NSA_DEV} -b - log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address after device bind" + run_cmd nettest -s -R -f -l ${a} -b + log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address" + + log_start + run_cmd nettest -s -f -l ${a} -b + log_test_addr ${a} $? 0 "TCP socket bind to nonlocal address" + + # currently fails with ACCES + #log_start + #run_cmd nettest -s -D -P icmp -f -l ${a} -b + #log_test_addr ${a} $? 0 "ICMP socket bind to nonlocal address" # # check that ICMP sockets cannot bind to broadcast and multicast addresses # a=${BCAST_IP} log_start - run_cmd nettest -s -R -P icmp -l ${a} -b + run_cmd nettest -s -D -P icmp -l ${a} -b log_test_addr ${a} $? 1 "ICMP socket bind to broadcast address" a=${MCAST_IP} log_start - run_cmd nettest -s -R -P icmp -f -l ${a} -b + run_cmd nettest -s -D -P icmp -l ${a} -b log_test_addr ${a} $? 1 "ICMP socket bind to multicast address" # @@ -1870,24 +1879,33 @@ ipv4_addr_bind_vrf() log_test_addr ${a} $? 1 "Raw socket bind to out of scope address after VRF bind" # - # raw socket with nonlocal bind + # tests for nonlocal bind # a=${NL_IP} log_start - run_cmd nettest -s -R -P icmp -f -l ${a} -I ${VRF} -b + run_cmd nettest -s -R -f -l ${a} -I ${VRF} -b log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address after VRF bind" + log_start + run_cmd nettest -s -f -l ${a} -I ${VRF} -b + log_test_addr ${a} $? 0 "TCP socket bind to nonlocal address after VRF bind" + + # currently fails with ACCES + #log_start + #run_cmd nettest -s -D -P icmp -f -l ${a} -I ${VRF} -b + #log_test_addr ${a} $? 0 "ICMP socket bind to nonlocal address after VRF bind" + # # check that ICMP sockets cannot bind to broadcast and multicast addresses # a=${BCAST_IP} log_start - run_cmd nettest -s -R -P icmp -l ${a} -I ${VRF} -b + run_cmd nettest -s -D -P icmp -l ${a} -I ${VRF} -b log_test_addr ${a} $? 1 "ICMP socket bind to broadcast address after VRF bind" a=${MCAST_IP} log_start - run_cmd nettest -s -R -P icmp -f -l ${a} -I ${VRF} -b + run_cmd nettest -s -D -P icmp -l ${a} -I ${VRF} -b log_test_addr ${a} $? 1 "ICMP socket bind to multicast address after VRF bind" # -- 2.36.1

3 years, 2 months

1
0
0 0

[PATCH 0/2] selftests/x86: AMX-related test improvements

by Chang S. Bae

A couple of test updates are included: * With this option [1,2], the kernel's altstack check becomes stringent. The x86 sigaltstack test is ignorant about this. Adjust the test now. This check was established [3] to ensure every AMX task's altstack is sufficient (regardless of that option) [4]. * The AMX test wrongly fails on non-AMX machines. Fix the code to skip the test instead. The series is available in this repository: git://github.com/intel/amx-linux.git selftest [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arc… [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Doc… [3] 3aac3ebea08f ("x86/signal: Implement sigaltstack size validation") [4] 4b7ca609a33d ("x86/signal: Use fpu::__state_user_size for sigalt stack validation") Chang S. Bae (2): selftests/x86/signal: Adjust the test to the kernel's altstack check selftests/x86/amx: Fix the test to avoid failure when AMX is unavailable tools/testing/selftests/x86/amx.c | 42 +++++++++++++++++------ tools/testing/selftests/x86/sigaltstack.c | 12 ++++++- 2 files changed, 42 insertions(+), 12 deletions(-) base-commit: f443e374ae131c168a065ea1748feac6b2e76613 -- 2.17.1

3 years, 2 months

2
7
0 0

[PATCH 0/2] livepatch: Move tests from lib/livepatch to selftests/livepatch

by Marcos Paulo de Souza

Hi there, The first patch moves the current livepatch tests to selftests, allowing it be better suited to contain more complex tests, like using userspace C code to use the livepatched kernel code. As a bonus it allows to use "gen_tar" to export the livepatch selftests, rebuild the modules by running make in selftests/livepatch directory and simplifies the process of creating and debugging new selftests. It keeps the ability to execute the tests by running the shell scripts, like "test-livepatch.sh", but beware that the kernel modules might not be up-to-date. The second patch includes a new test to exercise the functionality to livepatch a heavy hammered function. The test uses getpid in this case. I tested the changes by running the tests within the kernel source tree and running from the gen_tar extracted directory. Marcos Paulo de Souza (2): livepatch: Move tests from lib/livepatch to selftests/livepatch selftests: livepatch: Test livepatching a heavily called syscall arch/s390/configs/debug_defconfig | 1 - arch/s390/configs/defconfig | 1 - lib/Kconfig.debug | 22 ------- lib/Makefile | 2 - lib/livepatch/Makefile | 14 ----- tools/testing/selftests/livepatch/Makefile | 35 ++++++++++- tools/testing/selftests/livepatch/README | 5 +- tools/testing/selftests/livepatch/config | 1 - .../testing/selftests/livepatch/functions.sh | 34 ++++------- .../selftests/livepatch/test-callbacks.sh | 50 ++++++++-------- .../selftests/livepatch/test-ftrace.sh | 6 +- .../selftests/livepatch/test-livepatch.sh | 10 ++-- .../selftests/livepatch/test-shadow-vars.sh | 2 +- .../testing/selftests/livepatch/test-state.sh | 18 +++--- .../selftests/livepatch/test-syscall.sh | 46 ++++++++++++++ .../test_binaries/test_klp-call_getpid.c | 48 +++++++++++++++ .../selftests/livepatch/test_modules/Makefile | 25 ++++++++ .../test_modules}/test_klp_atomic_replace.c | 0 .../test_modules}/test_klp_callbacks_busy.c | 0 .../test_modules}/test_klp_callbacks_demo.c | 0 .../test_modules}/test_klp_callbacks_demo2.c | 0 .../test_modules}/test_klp_callbacks_mod.c | 0 .../test_modules}/test_klp_livepatch.c | 0 .../test_modules}/test_klp_shadow_vars.c | 0 .../livepatch/test_modules}/test_klp_state.c | 0 .../livepatch/test_modules}/test_klp_state2.c | 0 .../livepatch/test_modules}/test_klp_state3.c | 0 .../livepatch/test_modules/test_klp_syscall.c | 60 +++++++++++++++++++ 28 files changed, 269 insertions(+), 111 deletions(-) delete mode 100644 lib/livepatch/Makefile create mode 100755 tools/testing/selftests/livepatch/test-syscall.sh create mode 100644 tools/testing/selftests/livepatch/test_binaries/test_klp-call_getpid.c create mode 100644 tools/testing/selftests/livepatch/test_modules/Makefile rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_atomic_replace.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_callbacks_busy.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_callbacks_demo.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_callbacks_demo2.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_callbacks_mod.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_livepatch.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_shadow_vars.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_state.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_state2.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_state3.c (100%) create mode 100644 tools/testing/selftests/livepatch/test_modules/test_klp_syscall.c -- 2.35.3

3 years, 2 months

5
10
0 0

[PATCH bpf-next] selftests/bpf: add lwt ip encap tests to test_progs

by Eyal Birger

Port test_lwt_ip_encap.sh tests onto test_progs. In addition, this commit adds "egress_md" tests which test a similar flow as egress tests only they use gre devices in collect_md mode for encapsulation and set the tunnel key using bpf_set_tunnel_key(). This introduces minor changes to test_lwt_ip_encap.{sh,c} for consistency with the new tests: - GRE key must exist as bpf_set_tunnel_key() explicitly sets the TUNNEL_KEY flag - Source address for GRE traffic is set to IP*_5 instead of IP*_1 since GRE traffic is sent via veth5 so its address is selected when using bpf_set_tunnel_key() Note: currently these programs use the legacy section name convention as iproute2 lwt configuration does not support providing function names. Signed-off-by: Eyal Birger <eyal.birger(a)gmail.com> --- .../selftests/bpf/prog_tests/lwt_ip_encap.c | 582 ++++++++++++++++++ .../selftests/bpf/progs/test_lwt_ip_encap.c | 51 +- .../selftests/bpf/test_lwt_ip_encap.sh | 6 +- 3 files changed, 633 insertions(+), 6 deletions(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/lwt_ip_encap.c diff --git a/tools/testing/selftests/bpf/prog_tests/lwt_ip_encap.c b/tools/testing/selftests/bpf/prog_tests/lwt_ip_encap.c new file mode 100644 index 000000000000..e1b6f3ce6045 --- /dev/null +++ b/tools/testing/selftests/bpf/prog_tests/lwt_ip_encap.c @@ -0,0 +1,582 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause + +/* Setup/topology: + * + * NS1 NS2 NS3 + * veth1 <---> veth2 veth3 <---> veth4 (the top route) + * veth5 <---> veth6 veth7 <---> veth8 (the bottom route) + * + * each vethN gets IP[4|6]_N address + * + * IP*_SRC = IP*_1 + * IP*_DST = IP*_4 + * + * all tests test pings from IP*_SRC to IP*_DST + * + * by default, routes are configured to allow packets to go + * IP*_1 <=> IP*_2 <=> IP*_3 <=> IP*_4 (the top route) + * + * a GRE device is installed in NS3 with IP*_GRE, and + * NS1/NS2 are configured to route packets to IP*_GRE via IP*_8 + * (the bottom route) + * + * Tests: + * + * 1. routes NS2->IP*_DST are brought down, so the only way a ping + * from IP*_SRC to IP*_DST can work is via IP*_GRE + * + * 2a. in an egress test, a bpf LWT_XMIT program is installed on veth1 + * that encaps the packets with an IP/GRE header to route to IP*_GRE + * + * ping: SRC->[encap at veth1:egress]->GRE:decap->DST + * ping replies go DST->SRC directly + * + * 2b. in an ingress test, a bpf LWT_IN program is installed on veth2 + * that encaps the packets with an IP/GRE header to route to IP*_GRE + * + * ping: SRC->[encap at veth2:ingress]->GRE:decap->DST + * ping replies go DST->SRC directly + * + * 2c. in an egress_md test, a bpf LWT_XMIT program is installed on a + * route towards collect_md gre{,6} devices in NS1 and sets the tunnel + * key such that packets are encapsulated with an IP/GRE header to route + * to IP*_GRE + * + * ping: SRC->[encap at gre{,6}_md:xmit]->GRE:decap->DST + * ping replies go DST->SRC directly + */ + +#include "test_progs.h" +#include "network_helpers.h" + +#define NS_1 "ns_lwt_1" +#define NS_2 "ns_lwt_2" +#define NS_3 "ns_lwt_3" + +#define IP4_1 "172.16.1.100" +#define IP4_2 "172.16.2.100" +#define IP4_3 "172.16.3.100" +#define IP4_4 "172.16.4.100" +#define IP4_5 "172.16.5.100" +#define IP4_6 "172.16.6.100" +#define IP4_7 "172.16.7.100" +#define IP4_8 "172.16.8.100" +#define IP4_GRE "172.16.16.100" +#define IP4_DST IP4_4 + +#define IP6_1 "fb01::1" +#define IP6_2 "fb02::1" +#define IP6_3 "fb03::1" +#define IP6_4 "fb04::1" +#define IP6_5 "fb05::1" +#define IP6_6 "fb06::1" +#define IP6_7 "fb07::1" +#define IP6_8 "fb08::1" +#define IP6_GRE "fb10::1" +#define IP6_DST IP6_4 + +#define TEST_VRF_NAME "red" + +static const char * const namespaces[] = {NS_1, NS_2, NS_3, NULL}; +static __u32 duration; +static bool use_vrf; + +enum encap_type { + ENCAP_EGRESS, + ENCAP_INGRESS, + ENCAP_EGRESS_MD, +}; + +#define SYS(fmt, ...) \ + ({ \ + char cmd[1024]; \ + snprintf(cmd, sizeof(cmd), fmt, ##__VA_ARGS__); \ + if (!ASSERT_OK(system(cmd), cmd)) \ + goto fail; \ + }) + +#define ADD_VETH_PAIR(v1, ns1, v2, ns2) \ + SYS("ip link add " v1 " netns " ns1 " type veth " \ + "peer name " v2 " netns " ns2) + +#define SET_NS_ROUTE(op, netns, family, fmt, ...) \ + SYS("ip %s%s %s route " op " %s " fmt, \ + netns[0] ? "-netns " : "", netns[0] ? netns : "", \ + family == AF_INET6 ? "-6" : "", \ + use_vrf ? "vrf " TEST_VRF_NAME : "", \ + ##__VA_ARGS__) + +#define SET_NS_ADDR_ROUTE(op, netns, addr, fmt, ...) \ + ({ \ + int family = strchr(addr, ':') ? AF_INET6 : AF_INET; \ + SET_NS_ROUTE(op, netns, family, addr "%s " fmt, \ + family == AF_INET6 ? "/128" : "/32", \ + ##__VA_ARGS__); \ + }) + +#define ADD_ROUTE(family, ...) SET_NS_ROUTE("add", "", family, ##__VA_ARGS__) + +#define ADD_ADDR_ROUTE(...) SET_NS_ADDR_ROUTE("add", "", ##__VA_ARGS__) + +static int write_sysctl(const char *sysctl, const char *value) +{ + int fd, err, len; + + fd = open(sysctl, O_WRONLY); + if (CHECK(fd == -1, "open sysctl", "open(%s): %s (%d)\n", + sysctl, strerror(errno), errno)) + return -1; + + len = strlen(value); + err = write(fd, value, len); + close(fd); + if (CHECK(err != len, "write sysctl", + "write(%s, %s): err:%d %s (%d)\n", + sysctl, value, err, strerror(errno), errno)) + return -1; + + return 0; +} + +static int setup_namespaces(const char *verb) +{ + const char * const *ns = namespaces; + + while (*ns) { + SYS("ip netns %s %s", verb, *ns); + ns++; + } + return 0; +fail: + return -1; +} + +static void setup_namespaces_nofail(const char *verb) +{ + const char * const *ns = namespaces; + char cmd[128]; + + while (*ns) { + snprintf(cmd, sizeof(cmd), "ip netns %s %s > /dev/null 2>&1", + verb, *ns); + system(cmd); + ns++; + } +} + +static int setup_ns(const char *ns, int (*ns_setup_fn)(void)) +{ + struct nstoken *nstoken; + int err = -1; + + nstoken = open_netns(ns); + if (!ASSERT_OK_PTR(nstoken, "setns")) + return -1; + + /* rp_filter gets confused by what these tests are doing, + * so disable it. + * also disable IPv6 DAD because it sometimes takes too long and fails + * tests. + */ + if (write_sysctl("/proc/sys/net/ipv4/conf/all/rp_filter", "0") || + write_sysctl("/proc/sys/net/ipv4/conf/default/rp_filter", "0") || + write_sysctl("/proc/sys/net/ipv6/conf/all/accept_dad", "0") || + write_sysctl("/proc/sys/net/ipv6/conf/default/accept_dad", "0")) + goto exit; + + err = ns_setup_fn(); + +exit: + close_netns(nstoken); + return err; +} + +static int setup_device(const char *devname, const char *addr4, + const char *addr6) +{ + if (use_vrf) + SYS("ip link set %s vrf %s", devname, TEST_VRF_NAME); + + if (addr4) + SYS("ip addr add %s/24 dev %s", addr4, devname); + + if (addr6) + SYS("ip -6 addr add %s/128 nodad dev %s", addr6, devname); + + SYS("ip link set dev %s up", devname); + return 0; +fail: + return -1; +} + +static int setup_vrf(void) +{ + SYS("ip link add %s type vrf table 1001", TEST_VRF_NAME); + SYS("ip link set dev %s up", TEST_VRF_NAME); + SYS("ip route add table 1001 unreachable default metric 8192"); + SYS("ip -6 route add table 1001 unreachable default metric 8192"); + return 0; +fail: + return -1; +} + +static int setup_ns1(void) +{ + if (use_vrf && setup_vrf()) + goto fail; + + SYS("ip link add gre_md type gre external"); + SYS("ip link add gre6_md type ip6gre external"); + + if (setup_device("veth1", IP4_1, IP6_1) || + setup_device("veth5", IP4_5, IP6_5) || + setup_device("gre_md", IP4_1, IP6_1) || + setup_device("gre6_md", IP4_1, IP6_1)) + goto fail; + + /* Top route */ + ADD_ADDR_ROUTE(IP4_2, "dev veth1"); + ADD_ADDR_ROUTE(IP6_2, "dev veth1"); + ADD_ROUTE(AF_INET, "default dev veth1 via " IP4_2); + ADD_ROUTE(AF_INET6, "default dev veth1 via " IP6_2); + + /* Bottom route */ + ADD_ADDR_ROUTE(IP4_6, "dev veth5"); + ADD_ADDR_ROUTE(IP4_7, "dev veth5 via " IP4_6); + ADD_ADDR_ROUTE(IP4_8, "dev veth5 via " IP4_6); + ADD_ADDR_ROUTE(IP6_6, "dev veth5"); + ADD_ADDR_ROUTE(IP6_7, "dev veth5 via " IP6_6); + ADD_ADDR_ROUTE(IP6_8, "dev veth5 via " IP6_6); + + /* GRE peer via the bottom route */ + ADD_ADDR_ROUTE(IP4_GRE, "dev veth5 via " IP4_6); + ADD_ADDR_ROUTE(IP6_GRE, "dev veth5 via " IP6_6); + return 0; +fail: + return -1; +} + +static int setup_ns2(void) +{ + if (write_sysctl("/proc/sys/net/ipv4/ip_forward", "1") || + write_sysctl("/proc/sys/net/ipv6/conf/all/forwarding", "1")) + goto fail; + + if (use_vrf && setup_vrf()) + goto fail; + + if (setup_device("veth2", IP4_2, IP6_2) || + setup_device("veth3", IP4_3, IP6_3) || + setup_device("veth6", IP4_6, IP6_6) || + setup_device("veth7", IP4_7, IP6_7)) + goto fail; + + /* Top route */ + ADD_ADDR_ROUTE(IP4_1, "dev veth2"); + ADD_ADDR_ROUTE(IP4_4, "dev veth3"); + ADD_ADDR_ROUTE(IP6_1, "dev veth2"); + ADD_ADDR_ROUTE(IP6_4, "dev veth3"); + + /* Bottom route */ + ADD_ADDR_ROUTE(IP4_5, "dev veth6"); + ADD_ADDR_ROUTE(IP4_8, "dev veth7"); + ADD_ADDR_ROUTE(IP6_5, "dev veth6"); + ADD_ADDR_ROUTE(IP6_8, "dev veth7"); + + /* GRE peer via the bottom route */ + ADD_ADDR_ROUTE(IP4_GRE, "dev veth7 via " IP4_8); + ADD_ADDR_ROUTE(IP6_GRE, "dev veth7 via " IP6_8); + return 0; +fail: + return -1; +} + +static int setup_ns3(void) +{ + if (use_vrf && setup_vrf()) + goto fail; + + if (setup_device("veth4", IP4_4, IP6_4) || + setup_device("veth8", IP4_8, IP6_8)) + goto fail; + + /* Top route */ + ADD_ADDR_ROUTE(IP4_3, "dev veth4"); + ADD_ADDR_ROUTE(IP4_1, "dev veth4 via " IP4_3); + ADD_ADDR_ROUTE(IP4_2, "dev veth4 via " IP4_3); + ADD_ADDR_ROUTE(IP6_3, "dev veth4"); + ADD_ADDR_ROUTE(IP6_1, "dev veth4 via " IP6_3); + ADD_ADDR_ROUTE(IP6_2, "dev veth4 via " IP6_3); + + /* Bottom route */ + ADD_ADDR_ROUTE(IP4_7, "dev veth8"); + ADD_ADDR_ROUTE(IP4_5, "dev veth8 via " IP4_7); + ADD_ADDR_ROUTE(IP4_6, "dev veth8 via " IP4_7); + ADD_ADDR_ROUTE(IP6_7, "dev veth8"); + ADD_ADDR_ROUTE(IP6_5, "dev veth8 via " IP6_7); + ADD_ADDR_ROUTE(IP6_6, "dev veth8 via " IP6_7); + + /* configure IPv4 GRE device in NS3, and a route to it via the + * "bottom" route + */ + SYS("ip tunnel add gre_dev mode gre remote " IP4_5 " local " IP4_GRE + " ttl 255 key 0"); + if (setup_device("gre_dev", IP4_GRE, NULL)) + goto fail; + + SYS("ip tunnel add gre6_dev mode ip6gre remote " IP6_5 " local " IP6_GRE + " ttl 255 key 0"); + if (setup_device("gre6_dev", NULL, IP6_GRE)) + goto fail; + + return 0; +fail: + return -1; +} + +static int setup_links_and_routes(void) +{ + ADD_VETH_PAIR("veth1", NS_1, "veth2", NS_2); + ADD_VETH_PAIR("veth3", NS_2, "veth4", NS_3); + ADD_VETH_PAIR("veth5", NS_1, "veth6", NS_2); + ADD_VETH_PAIR("veth7", NS_2, "veth8", NS_3); + + if (setup_ns(NS_1, setup_ns1) || + setup_ns(NS_2, setup_ns2) || + setup_ns(NS_3, setup_ns3)) + goto fail; + + return 0; +fail: + return -1; +} + +static int remove_routes_to_gredev(void) +{ + SET_NS_ADDR_ROUTE("del", NS_1, IP4_GRE, "dev veth5"); + SET_NS_ADDR_ROUTE("del", NS_1, IP6_GRE, "dev veth5"); + SET_NS_ADDR_ROUTE("del", NS_2, IP4_GRE, "dev veth7"); + SET_NS_ADDR_ROUTE("del", NS_2, IP6_GRE, "dev veth7"); +fail: + return -1; +} + +static int add_unreachable_routes_to_gredev(void) +{ + SET_NS_ROUTE("add", NS_1, AF_INET, "unreachable " IP4_GRE "/32"); + SET_NS_ROUTE("add", NS_1, AF_INET6, "unreachable " IP6_GRE "/128"); + SET_NS_ROUTE("add", NS_2, AF_INET, "unreachable " IP4_GRE "/32"); + SET_NS_ROUTE("add", NS_2, AF_INET6, "unreachable " IP6_GRE "/128"); + return 0; +fail: + return -1; +} + +static int test_ping(int family, bool must_fail, bool bindtodev) +{ + const char *addr, *ping_args; + char cmd[1024]; + int ret; + + addr = family == AF_INET ? IP4_DST : IP6_DST; + ping_args = bindtodev ? "-c 1 -W 1 -I veth1" : "-c 1 -W 1"; + snprintf(cmd, sizeof(cmd), + "ip netns exec " NS_1 " %s %s %s > /dev/null", + ping_command(family), ping_args, addr); + ret = system(cmd); + if (!ASSERT_EQ(!!ret, !!must_fail, cmd)) + return -1; + return 0; +} + +#define TIMEOUT_MILLIS 10000 + +static int test_gso(int family, const char *dst) +{ + int listen_fd = -1, accept_fd = -1, client_fd = -1; + struct nstoken *nstoken; + static char buf[9000]; + int n, ret = -1; + + nstoken = open_netns(NS_3); + if (!ASSERT_OK_PTR(nstoken, "setns")) + return -1; + + listen_fd = start_server(family, SOCK_STREAM, dst, 9000, 0); + if (!ASSERT_GE(listen_fd, 0, "listen")) + goto done; + + close_netns(nstoken); + nstoken = open_netns(NS_1); + if (!ASSERT_OK_PTR(nstoken, "setns src")) + goto done; + + client_fd = connect_to_fd(listen_fd, TIMEOUT_MILLIS); + if (!ASSERT_GE(client_fd, 0, "connect_to_fd")) + goto done; + + accept_fd = accept(listen_fd, NULL, NULL); + if (!ASSERT_GE(accept_fd, 0, "accept")) + goto done; + + if (!ASSERT_OK(settimeo(accept_fd, TIMEOUT_MILLIS), "settimeo")) + goto done; + + n = write(client_fd, buf, sizeof(buf)); + if (!ASSERT_EQ(n, sizeof(buf), "send to server")) + goto done; + + n = read(accept_fd, buf, sizeof(buf)); + ASSERT_EQ(n, sizeof(buf), "recv from server"); + + ret = 0; + +done: + if (nstoken) + close_netns(nstoken); + if (listen_fd >= 0) + close(listen_fd); + if (accept_fd >= 0) + close(accept_fd); + if (client_fd >= 0) + close(client_fd); + return ret; +} + +static void lwt_ip_encap_test(int encap_family, enum encap_type encap_type) +{ + const char *prog_sec, *encap_dev, *lwt_type, *encap_ns; + bool bindtodev = true; + + if (!ASSERT_OK(setup_namespaces("add"), "setup namespaces")) + return; + if (!ASSERT_OK(setup_links_and_routes(), + "setup links and routes")) + goto fail; + + sleep(2); /* reduce flakiness */ + + /* by default, pings work */ + test_ping(AF_INET, false, bindtodev); + test_ping(AF_INET6, false, bindtodev); + + /* remove NS2->DST routes, ping fails */ + SET_NS_ADDR_ROUTE("del", NS_2, IP4_DST, "dev veth3"); + SET_NS_ADDR_ROUTE("del", NS_2, IP6_DST, "dev veth3"); + + test_ping(AF_INET, true, bindtodev); + test_ping(AF_INET6, true, bindtodev); + + prog_sec = encap_family == AF_INET ? "encap_gre" : "encap_gre6"; + + switch (encap_type) { + case ENCAP_EGRESS: + encap_dev = "veth1"; + lwt_type = "xmit"; + encap_ns = NS_1; + break; + case ENCAP_INGRESS: + encap_dev = "veth2"; + lwt_type = "in"; + encap_ns = NS_2; + break; + case ENCAP_EGRESS_MD: + switch (encap_family) { + case AF_INET: + prog_sec = "encap_gre_md"; + encap_dev = "gre_md"; + break; + case AF_INET6: + prog_sec = "encap_gre6_md"; + encap_dev = "gre6_md"; + break; + default: + goto fail; + } + lwt_type = "xmit"; + encap_ns = NS_1; + break; + default: + goto fail; + } + + /* install replacement routes (LWT/eBPF), pings succeed */ + SET_NS_ADDR_ROUTE("add", encap_ns, IP4_DST, + "encap bpf %s obj test_lwt_ip_encap.o sec %s dev %s", + lwt_type, prog_sec, encap_dev); + SET_NS_ADDR_ROUTE("add", encap_ns, IP6_DST, + "encap bpf %s obj test_lwt_ip_encap.o sec %s dev %s", + lwt_type, prog_sec, encap_dev); + + /* binding to device doesn't work for egress_md tests as routing is + * asymmetrical + */ + bindtodev = encap_type != ENCAP_EGRESS_MD; + test_ping(AF_INET, false, bindtodev); + test_ping(AF_INET6, false, bindtodev); + + /* VRF is complex for testing GSO in this setup */ + if (!use_vrf && encap_type != ENCAP_INGRESS) { + test_gso(AF_INET, IP4_DST); + test_gso(AF_INET6, IP6_DST); + } + + /* a negative test: remove routes to GRE devices: ping fails */ + if (remove_routes_to_gredev()) + goto fail; + + test_ping(AF_INET, true, bindtodev); + test_ping(AF_INET6, true, bindtodev); + + if (add_unreachable_routes_to_gredev()) + goto fail; + + test_ping(AF_INET, true, bindtodev); + test_ping(AF_INET6, true, bindtodev); +fail: + setup_namespaces("delete"); +} + +#define RUN_TEST(name, family, encap_type, _use_vrf) \ + ({ \ + if (test__start_subtest(name)) { \ + use_vrf = _use_vrf; \ + lwt_ip_encap_test(family, encap_type); \ + } \ + }) + +static void *lwt_ip_encap_run_tests(void *arg) +{ + setup_namespaces_nofail("delete"); + + RUN_TEST("lwt_ipv4_encap_egress", AF_INET, ENCAP_EGRESS, false); + RUN_TEST("lwt_ipv6_encap_egress", AF_INET6, ENCAP_EGRESS, false); + RUN_TEST("lwt_ipv4_encap_egress_vrf", AF_INET, ENCAP_EGRESS, true); + RUN_TEST("lwt_ipv6_encap_egress_vrf", AF_INET6, ENCAP_EGRESS, true); + + RUN_TEST("lwt_ipv4_encap_ingress", AF_INET, ENCAP_INGRESS, false); + RUN_TEST("lwt_ipv6_encap_ingress", AF_INET6, ENCAP_INGRESS, false); + RUN_TEST("lwt_ipv4_encap_ingress_vrf", AF_INET, ENCAP_INGRESS, true); + RUN_TEST("lwt_ipv6_encap_ingress_vrf", AF_INET6, ENCAP_INGRESS, true); + + /* bpf_set_tunnel_key() doesn't support setting underlying VRF routing + * so egress_md tests don't run in VRF setup. + */ + RUN_TEST("lwt_ipv4_encap_egress_md", AF_INET, ENCAP_EGRESS_MD, false); + RUN_TEST("lwt_ipv6_encap_egress_md", AF_INET6, ENCAP_EGRESS_MD, false); + return NULL; +} + +void serial_test_lwt_ip_encap(void) +{ + pthread_t test_thread; + int err; + + /* Run the tests in their own thread to isolate the namespace changes + * so they do not affect the environment of other tests. + * (specifically needed because of unshare(CLONE_NEWNS) in open_netns()) + */ + err = pthread_create(&test_thread, NULL, &lwt_ip_encap_run_tests, NULL); + if (ASSERT_OK(err, "pthread_create")) + ASSERT_OK(pthread_join(test_thread, NULL), "pthread_join"); +} diff --git a/tools/testing/selftests/bpf/progs/test_lwt_ip_encap.c b/tools/testing/selftests/bpf/progs/test_lwt_ip_encap.c index d6cb986e7533..39c6bd5402ae 100644 --- a/tools/testing/selftests/bpf/progs/test_lwt_ip_encap.c +++ b/tools/testing/selftests/bpf/progs/test_lwt_ip_encap.c @@ -10,8 +10,11 @@ struct grehdr { __be16 flags; __be16 protocol; + __be32 key; }; +#define GRE_KEY 0x2000 + SEC("encap_gre") int bpf_lwt_encap_gre(struct __sk_buff *skb) { @@ -28,10 +31,10 @@ int bpf_lwt_encap_gre(struct __sk_buff *skb) hdr.iph.ttl = 0x40; hdr.iph.protocol = 47; /* IPPROTO_GRE */ #if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ - hdr.iph.saddr = 0x640110ac; /* 172.16.1.100 */ + hdr.iph.saddr = 0x640510ac; /* 172.16.5.100 */ hdr.iph.daddr = 0x641010ac; /* 172.16.16.100 */ #elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__ - hdr.iph.saddr = 0xac100164; /* 172.16.1.100 */ + hdr.iph.saddr = 0xac100564; /* 172.16.5.100 */ hdr.iph.daddr = 0xac101064; /* 172.16.16.100 */ #else #error "Fix your compiler's __BYTE_ORDER__?!" @@ -39,6 +42,7 @@ int bpf_lwt_encap_gre(struct __sk_buff *skb) hdr.iph.tot_len = bpf_htons(skb->len + sizeof(struct encap_hdr)); hdr.greh.protocol = skb->protocol; + hdr.greh.flags = bpf_htons(GRE_KEY); err = bpf_lwt_push_encap(skb, BPF_LWT_ENCAP_IP, &hdr, sizeof(struct encap_hdr)); @@ -63,9 +67,9 @@ int bpf_lwt_encap_gre6(struct __sk_buff *skb) hdr.ip6hdr.payload_len = bpf_htons(skb->len + sizeof(struct grehdr)); hdr.ip6hdr.nexthdr = 47; /* IPPROTO_GRE */ hdr.ip6hdr.hop_limit = 0x40; - /* fb01::1 */ + /* fb05::1 */ hdr.ip6hdr.saddr.s6_addr[0] = 0xfb; - hdr.ip6hdr.saddr.s6_addr[1] = 1; + hdr.ip6hdr.saddr.s6_addr[1] = 5; hdr.ip6hdr.saddr.s6_addr[15] = 1; /* fb10::1 */ hdr.ip6hdr.daddr.s6_addr[0] = 0xfb; @@ -73,6 +77,7 @@ int bpf_lwt_encap_gre6(struct __sk_buff *skb) hdr.ip6hdr.daddr.s6_addr[15] = 1; hdr.greh.protocol = skb->protocol; + hdr.greh.flags = bpf_htons(GRE_KEY); err = bpf_lwt_push_encap(skb, BPF_LWT_ENCAP_IP, &hdr, sizeof(struct encap_hdr)); @@ -82,4 +87,42 @@ int bpf_lwt_encap_gre6(struct __sk_buff *skb) return BPF_LWT_REROUTE; } +SEC("encap_gre_md") +int bpf_lwt_encap_gre_md(struct __sk_buff *skb) +{ + struct bpf_tunnel_key key; + int err; + + __builtin_memset(&key, 0x0, sizeof(key)); + key.remote_ipv4 = 0xac101064; /* 172.16.16.100 - always in host order */ + key.tunnel_ttl = 0x40; + err = bpf_skb_set_tunnel_key(skb, &key, sizeof(key), + BPF_F_ZERO_CSUM_TX | BPF_F_SEQ_NUMBER); + if (err) + return BPF_DROP; + + return BPF_OK; +} + +SEC("encap_gre6_md") +int bpf_lwt_encap_gre6_md(struct __sk_buff *skb) +{ + struct bpf_tunnel_key key; + int err; + + __builtin_memset(&key, 0x0, sizeof(key)); + + /* fb10::1 */ + key.remote_ipv6[0] = bpf_htonl(0xfb100000); + key.remote_ipv6[3] = bpf_htonl(0x01); + key.tunnel_ttl = 0x40; + err = bpf_skb_set_tunnel_key(skb, &key, sizeof(key), + BPF_F_ZERO_CSUM_TX | BPF_F_SEQ_NUMBER | + BPF_F_TUNINFO_IPV6); + if (err) + return BPF_DROP; + + return BPF_OK; +} + char _license[] SEC("license") = "GPL"; diff --git a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh index 6c69c42b1d60..a79f7840ceb1 100755 --- a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh +++ b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh @@ -238,7 +238,8 @@ setup() ip -netns ${NS3} -6 route add ${IPv6_6}/128 dev veth8 via ${IPv6_7} # configure IPv4 GRE device in NS3, and a route to it via the "bottom" route - ip -netns ${NS3} tunnel add gre_dev mode gre remote ${IPv4_1} local ${IPv4_GRE} ttl 255 + ip -netns ${NS3} tunnel add gre_dev mode gre remote ${IPv4_5} \ + local ${IPv4_GRE} ttl 255 key 0 ip -netns ${NS3} link set gre_dev up ip -netns ${NS3} addr add ${IPv4_GRE} dev gre_dev ip -netns ${NS1} route add ${IPv4_GRE}/32 dev veth5 via ${IPv4_6} ${VRF} @@ -246,7 +247,8 @@ setup() # configure IPv6 GRE device in NS3, and a route to it via the "bottom" route - ip -netns ${NS3} -6 tunnel add name gre6_dev mode ip6gre remote ${IPv6_1} local ${IPv6_GRE} ttl 255 + ip -netns ${NS3} -6 tunnel add name gre6_dev mode ip6gre remote ${IPv6_5} \ + local ${IPv6_GRE} ttl 255 key 0 ip -netns ${NS3} link set gre6_dev up ip -netns ${NS3} -6 addr add ${IPv6_GRE} nodad dev gre6_dev ip -netns ${NS1} -6 route add ${IPv6_GRE}/128 dev veth5 via ${IPv6_6} ${VRF} -- 2.34.1

3 years, 2 months

3
4
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror