- Linux-kselftest-mirror - lists.linaro.org

[PATCH bpf-next v2 05/10] selftests: xsk: Disable IPv6 on VETH1

by Kal Conley

This change fixes flakiness in the BIDIRECTIONAL test: # [is_pkt_valid] expected length [60], got length [90] not ok 1 FAIL: SKB BUSY-POLL BIDIRECTIONAL When IPv6 is enabled, the interface will periodically send MLDv1 and MLDv2 packets. These packets can cause the BIDIRECTIONAL test to fail since it uses VETH0 for RX. For other tests, this was not a problem since they only receive on VETH1 and IPv6 was already disabled on VETH0. Signed-off-by: Kal Conley <kal.conley(a)dectris.com> --- tools/testing/selftests/bpf/test_xsk.sh | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/bpf/test_xsk.sh b/tools/testing/selftests/bpf/test_xsk.sh index b077cf58f825..377fb157a57c 100755 --- a/tools/testing/selftests/bpf/test_xsk.sh +++ b/tools/testing/selftests/bpf/test_xsk.sh @@ -116,6 +116,7 @@ setup_vethPairs() { ip link add ${VETH0} numtxqueues 4 numrxqueues 4 type veth peer name ${VETH1} numtxqueues 4 numrxqueues 4 if [ -f /proc/net/if_inet6 ]; then echo 1 > /proc/sys/net/ipv6/conf/${VETH0}/disable_ipv6 + echo 1 > /proc/sys/net/ipv6/conf/${VETH1}/disable_ipv6 fi if [[ $verbose -eq 1 ]]; then echo "setting up ${VETH1}" -- 2.39.2

2 years, 7 months

1
0
0 0

[PATCH bpf-next v2 03/10] selftests: xsk: Add test case for packets at end of UMEM

by Kal Conley

Add test case to testapp_invalid_desc for valid packets at the end of the UMEM. Signed-off-by: Kal Conley <kal.conley(a)dectris.com> --- tools/testing/selftests/bpf/xskxceiver.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/bpf/xskxceiver.c b/tools/testing/selftests/bpf/xskxceiver.c index 3956f5db84f3..34a1f32fe752 100644 --- a/tools/testing/selftests/bpf/xskxceiver.c +++ b/tools/testing/selftests/bpf/xskxceiver.c @@ -1662,6 +1662,8 @@ static void testapp_invalid_desc(struct test_spec *test) {-2, PKT_SIZE, 0, false}, /* Packet too large */ {0x2000, XSK_UMEM__INVALID_FRAME_SIZE, 0, false}, + /* Up to end of umem allowed */ + {umem_size - PKT_SIZE, PKT_SIZE, 0, true}, /* After umem ends */ {umem_size, PKT_SIZE, 0, false}, /* Straddle the end of umem */ @@ -1675,16 +1677,17 @@ static void testapp_invalid_desc(struct test_spec *test) if (test->ifobj_tx->umem->unaligned_mode) { /* Crossing a page boundrary allowed */ - pkts[6].valid = true; + pkts[7].valid = true; } if (test->ifobj_tx->umem->frame_size == XSK_UMEM__DEFAULT_FRAME_SIZE / 2) { /* Crossing a 2K frame size boundrary not allowed */ - pkts[7].valid = false; + pkts[8].valid = false; } if (test->ifobj_tx->shared_umem) { pkts[4].addr += umem_size; pkts[5].addr += umem_size; + pkts[6].addr += umem_size; } pkt_stream_generate_custom(test, pkts, ARRAY_SIZE(pkts)); -- 2.39.2

2 years, 7 months

1
0
0 0

[PATCH bpf-next v2 02/10] selftests: xsk: Use correct UMEM size in testapp_invalid_desc

by Kal Conley

Avoid UMEM_SIZE macro in testapp_invalid_desc which is incorrect when the frame size is not XSK_UMEM__DEFAULT_FRAME_SIZE. Also remove the macro since it's no longer being used. Fixes: 909f0e28207c ("selftests: xsk: Add tests for 2K frame size") Signed-off-by: Kal Conley <kal.conley(a)dectris.com> --- tools/testing/selftests/bpf/xskxceiver.c | 9 +++++---- tools/testing/selftests/bpf/xskxceiver.h | 1 - 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/bpf/xskxceiver.c b/tools/testing/selftests/bpf/xskxceiver.c index b65e0645b0cd..3956f5db84f3 100644 --- a/tools/testing/selftests/bpf/xskxceiver.c +++ b/tools/testing/selftests/bpf/xskxceiver.c @@ -1652,6 +1652,7 @@ static void testapp_single_pkt(struct test_spec *test) static void testapp_invalid_desc(struct test_spec *test) { + u64 umem_size = test->ifobj_tx->umem->num_frames * test->ifobj_tx->umem->frame_size; struct pkt pkts[] = { /* Zero packet address allowed */ {0, PKT_SIZE, 0, true}, @@ -1662,9 +1663,9 @@ static void testapp_invalid_desc(struct test_spec *test) /* Packet too large */ {0x2000, XSK_UMEM__INVALID_FRAME_SIZE, 0, false}, /* After umem ends */ - {UMEM_SIZE, PKT_SIZE, 0, false}, + {umem_size, PKT_SIZE, 0, false}, /* Straddle the end of umem */ - {UMEM_SIZE - PKT_SIZE / 2, PKT_SIZE, 0, false}, + {umem_size - PKT_SIZE / 2, PKT_SIZE, 0, false}, /* Straddle a page boundrary */ {0x3000 - PKT_SIZE / 2, PKT_SIZE, 0, false}, /* Straddle a 2K boundrary */ @@ -1682,8 +1683,8 @@ static void testapp_invalid_desc(struct test_spec *test) } if (test->ifobj_tx->shared_umem) { - pkts[4].addr += UMEM_SIZE; - pkts[5].addr += UMEM_SIZE; + pkts[4].addr += umem_size; + pkts[5].addr += umem_size; } pkt_stream_generate_custom(test, pkts, ARRAY_SIZE(pkts)); diff --git a/tools/testing/selftests/bpf/xskxceiver.h b/tools/testing/selftests/bpf/xskxceiver.h index bdb4efedf3a9..cc24ab72f3ff 100644 --- a/tools/testing/selftests/bpf/xskxceiver.h +++ b/tools/testing/selftests/bpf/xskxceiver.h @@ -53,7 +53,6 @@ #define THREAD_TMOUT 3 #define DEFAULT_PKT_CNT (4 * 1024) #define DEFAULT_UMEM_BUFFERS (DEFAULT_PKT_CNT / 4) -#define UMEM_SIZE (DEFAULT_UMEM_BUFFERS * XSK_UMEM__DEFAULT_FRAME_SIZE) #define RX_FULL_RXQSIZE 32 #define UMEM_HEADROOM_TEST_SIZE 128 #define XSK_UMEM__INVALID_FRAME_SIZE (XSK_UMEM__DEFAULT_FRAME_SIZE + 1) -- 2.39.2

2 years, 7 months

1
0
0 0

[PATCH bpf-next v2 01/10] selftests: xsk: Add xskxceiver.h dependency to Makefile

by Kal Conley

xskxceiver depends on xskxceiver.h so tell make about it. Signed-off-by: Kal Conley <kal.conley(a)dectris.com> --- tools/testing/selftests/bpf/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 4a8ef118fd9d..223be997f15d 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -612,7 +612,7 @@ $(OUTPUT)/test_verifier: test_verifier.c verifier/tests.h $(BPFOBJ) | $(OUTPUT) $(call msg,BINARY,,$@) $(Q)$(CC) $(CFLAGS) $(filter %.a %.o %.c,$^) $(LDLIBS) -o $@ -$(OUTPUT)/xskxceiver: xskxceiver.c $(OUTPUT)/xsk.o $(OUTPUT)/xsk_xdp_progs.skel.h $(BPFOBJ) | $(OUTPUT) +$(OUTPUT)/xskxceiver: xskxceiver.c xskxceiver.h $(OUTPUT)/xsk.o $(OUTPUT)/xsk_xdp_progs.skel.h $(BPFOBJ) | $(OUTPUT) $(call msg,BINARY,,$@) $(Q)$(CC) $(CFLAGS) $(filter %.a %.o %.c,$^) $(LDLIBS) -o $@ -- 2.39.2

2 years, 7 months

1
0
0 0

[PATCH bpf-next 3/3] selftests: xsk: Add tests for 8K and 9K frame sizes

by Kal Conley

Add tests: - RUN_TO_COMPLETION_8K_FRAME_SIZE: frame_size=8192 (aligned) - RUN_TO_COMPLETION_9K_FRAME_SIZE: frame_size=9000 (unaligned) Signed-off-by: Kal Conley <kal.conley(a)dectris.com> --- tools/testing/selftests/bpf/xskxceiver.c | 24 ++++++++++++++++++++++++ tools/testing/selftests/bpf/xskxceiver.h | 2 ++ 2 files changed, 26 insertions(+) diff --git a/tools/testing/selftests/bpf/xskxceiver.c b/tools/testing/selftests/bpf/xskxceiver.c index 7a47ef28fbce..f10ff8c5e9c5 100644 --- a/tools/testing/selftests/bpf/xskxceiver.c +++ b/tools/testing/selftests/bpf/xskxceiver.c @@ -1789,6 +1789,30 @@ static void run_pkt_test(struct test_spec *test, enum test_mode mode, enum test_ pkt_stream_replace(test, DEFAULT_PKT_CNT, PKT_SIZE); testapp_validate_traffic(test); break; + case TEST_TYPE_RUN_TO_COMPLETION_8K_FRAME: + if (!hugepages_present(test->ifobj_tx)) { + ksft_test_result_skip("No 2M huge pages present.\n"); + return; + } + test_spec_set_name(test, "RUN_TO_COMPLETION_8K_FRAME_SIZE"); + test->ifobj_tx->umem->frame_size = 8192; + test->ifobj_rx->umem->frame_size = 8192; + pkt_stream_replace(test, DEFAULT_PKT_CNT, PKT_SIZE); + testapp_validate_traffic(test); + break; + case TEST_TYPE_RUN_TO_COMPLETION_9K_FRAME: + if (!hugepages_present(test->ifobj_tx)) { + ksft_test_result_skip("No 2M huge pages present.\n"); + return; + } + test_spec_set_name(test, "RUN_TO_COMPLETION_9K_FRAME_SIZE"); + test->ifobj_tx->umem->frame_size = 9000; + test->ifobj_rx->umem->frame_size = 9000; + test->ifobj_tx->umem->unaligned_mode = true; + test->ifobj_rx->umem->unaligned_mode = true; + pkt_stream_replace(test, DEFAULT_PKT_CNT, PKT_SIZE); + testapp_validate_traffic(test); + break; case TEST_TYPE_RX_POLL: test->ifobj_rx->use_poll = true; test_spec_set_name(test, "POLL_RX"); diff --git a/tools/testing/selftests/bpf/xskxceiver.h b/tools/testing/selftests/bpf/xskxceiver.h index 3e8ec7d8ec32..ff723b6d7852 100644 --- a/tools/testing/selftests/bpf/xskxceiver.h +++ b/tools/testing/selftests/bpf/xskxceiver.h @@ -70,6 +70,8 @@ enum test_mode { enum test_type { TEST_TYPE_RUN_TO_COMPLETION, TEST_TYPE_RUN_TO_COMPLETION_2K_FRAME, + TEST_TYPE_RUN_TO_COMPLETION_8K_FRAME, + TEST_TYPE_RUN_TO_COMPLETION_9K_FRAME, TEST_TYPE_RUN_TO_COMPLETION_SINGLE_PKT, TEST_TYPE_RX_POLL, TEST_TYPE_TX_POLL, -- 2.39.2

2 years, 7 months

3
3
0 0

[PATCH v2 0/4] iommufd: Add iommu hardware info reporting

by Yi Liu

iommufd gives userspace the capability to manipulate iommu subsytem. e.g. DMA map/unmap etc. In the near future, it will support iommu nested translation. Different platform vendors have different implementation for the nested translation. So before set up nested translation, userspace needs to know the hardware iommu information. For example, Intel VT-d supports using guest I/O page table as the stage-1 translation table. This requires guest I/O page table be compatible with hardware IOMMU. This series reports the iommu hardware information for a given iommufd_device which has been bound to iommufd. It is preparation work for userspace to allocate hwpt for given device. Like the nested translation support[1]. This series introduces an iommu op to report the iommu hardware info, and an ioctl IOMMU_DEVICE_GET_HW_INFO is added to report such hardware info to user. enum iommu_hw_info_type is defined to differentiate the iommu hardware info reported to user hence user can decode them. This series only adds the framework for iommu hw info reporting, the complete reporting path needs vendor specific definition and driver support. The full picture is available in [1] as well. base-commit: 4c7e97cb6e65eab02991f60a5cc7a4fed5498c7a [1] https://github.com/yiliu1765/iommufd/tree/iommufd_nesting Change log: v2: - Drop patch 05 of v1 as it is already covered by other series - Rename the capability info to be iommu hardware info v1: https://lore.kernel.org/linux-iommu/20230209041642.9346-1-yi.l.liu@intel.co… Regards, Yi Liu Lu Baolu (1): iommu: Add new iommu op to get iommu hardware information Nicolin Chen (1): iommufd/selftest: Add coverage for IOMMU_DEVICE_GET_HW_INFO ioctl Yi Liu (2): iommu: Move dev_iommu_ops() to private header iommufd: Add IOMMU_DEVICE_GET_HW_INFO drivers/iommu/iommu-priv.h | 11 +++ drivers/iommu/iommu.c | 2 + drivers/iommu/iommufd/device.c | 75 +++++++++++++++++++ drivers/iommu/iommufd/iommufd_private.h | 1 + drivers/iommu/iommufd/iommufd_test.h | 15 ++++ drivers/iommu/iommufd/main.c | 3 + drivers/iommu/iommufd/selftest.c | 16 ++++ include/linux/iommu.h | 24 +++--- include/uapi/linux/iommufd.h | 47 ++++++++++++ tools/testing/selftests/iommu/iommufd.c | 17 ++++- tools/testing/selftests/iommu/iommufd_utils.h | 26 +++++++ 11 files changed, 225 insertions(+), 12 deletions(-) -- 2.34.1

2 years, 7 months

5
15
0 0

[PATCH][next] selftests: prctl: Fix spelling mistake "anonynous" -> "anonymous"

by Colin Ian King

There is a spelling mistake in an log message. Fix it. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- tools/testing/selftests/prctl/set-anon-vma-name-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/prctl/set-anon-vma-name-test.c b/tools/testing/selftests/prctl/set-anon-vma-name-test.c index 26d853c5a0c1..4275cb256dce 100644 --- a/tools/testing/selftests/prctl/set-anon-vma-name-test.c +++ b/tools/testing/selftests/prctl/set-anon-vma-name-test.c @@ -97,7 +97,7 @@ TEST_F(vma, renaming) { TH_LOG("Try to pass invalid name (with non-printable character \\1) to rename the VMA"); EXPECT_EQ(rename_vma((unsigned long)self->ptr_anon, AREA_SIZE, BAD_NAME), -EINVAL); - TH_LOG("Try to rename non-anonynous VMA"); + TH_LOG("Try to rename non-anonymous VMA"); EXPECT_EQ(rename_vma((unsigned long) self->ptr_not_anon, AREA_SIZE, GOOD_NAME), -EINVAL); } -- 2.30.2

2 years, 7 months

1
0
0 0

[PATCH net-next v2 0/4] mptcp: a couple of cleanups and improvements

by Matthieu Baerts

Patch 1 removes an unneeded address copy in subflow_syn_recv_sock(). Patch 2 simplifies subflow_syn_recv_sock() to postpone some actions and to avoid a bunch of conditionals. Patch 3 stops reporting limits that are not taken into account when the userspace PM is used. Patch 4 adds a new test to validate that the 'subflows' field reported by the kernel is correct. Such info can be retrieved via Netlink (e.g. with ss) or getsockopt(SOL_MPTCP, MPTCP_INFO). Signed-off-by: Matthieu Baerts <matthieu.baerts(a)tessares.net> --- Changes in v2: - Patch 3/4's commit message has been updated to use the correct SHA - Rebased on latest net-next - Link to v1: https://lore.kernel.org/r/20230324-upstream-net-next-20230324-misc-features… --- Geliang Tang (1): selftests: mptcp: add mptcp_info tests Matthieu Baerts (1): mptcp: do not fill info not used by the PM in used Paolo Abeni (2): mptcp: avoid unneeded address copy mptcp: simplify subflow_syn_recv_sock() net/mptcp/sockopt.c | 20 +++++++---- net/mptcp/subflow.c | 43 +++++++--------------- tools/testing/selftests/net/mptcp/mptcp_join.sh | 47 ++++++++++++++++++++++++- 3 files changed, 72 insertions(+), 38 deletions(-) --- base-commit: e5b42483ccce50d5b957f474fd332afd4ef0c27b change-id: 20230324-upstream-net-next-20230324-misc-features-178b2b618414 Best regards, -- Matthieu Baerts <matthieu.baerts(a)tessares.net>

2 years, 7 months

2
5
0 0

Language Services for Your Business

by Ariel Zhang

2 years, 7 months

1
0
0 0

[PATCH] kunit: increase KUNIT_LOG_SIZE to 2048 bytes

by Heiko Carstens

The s390 specific test_unwind kunit test has 39 parameterized tests. The results in debugfs are truncated since the full log doesn't fit into 1500 bytes. Therefore increase KUNIT_LOG_SIZE to 2048 bytes in a similar way like it was done recently with commit "kunit: fix bug in debugfs logs of parameterized tests". With that the whole test result is present. Reported-by: Alexander Egorenkov <egorenar(a)linux.ibm.com> Signed-off-by: Heiko Carstens <hca(a)linux.ibm.com> --- include/kunit/test.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/kunit/test.h b/include/kunit/test.h index 9721584027d8..57b309c6ca27 100644 --- a/include/kunit/test.h +++ b/include/kunit/test.h @@ -34,7 +34,7 @@ DECLARE_STATIC_KEY_FALSE(kunit_running); struct kunit; /* Size of log associated with test. */ -#define KUNIT_LOG_SIZE 1500 +#define KUNIT_LOG_SIZE 2048 /* Maximum size of parameter description string. */ #define KUNIT_PARAM_DESC_SIZE 128 -- 2.37.2

2 years, 7 months

3
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror