- Linux-kselftest-mirror - lists.linaro.org

[patch net] sefltests: netdevsim: wait for devlink instance after netns removal

by Jiri Pirko

From: Jiri Pirko <jiri(a)nvidia.com> When devlink instance is put into network namespace and that network namespace gets deleted, devlink instance is moved back into init_ns. This is done as a part of cleanup_net() routine. Since cleanup_net() is called asynchronously from workqueue, there is no guarantee that the devlink instance move is done after "ip netns del" returns. So fix this race by making sure that the devlink instance is present before any other operation. Reported-by: Amir Tzin <amirtz(a)nvidia.com> Fixes: b74c37fd35a2 ("selftests: netdevsim: add tests for devlink reload with resources") Signed-off-by: Jiri Pirko <jiri(a)nvidia.com> --- .../selftests/drivers/net/netdevsim/devlink.sh | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/tools/testing/selftests/drivers/net/netdevsim/devlink.sh b/tools/testing/selftests/drivers/net/netdevsim/devlink.sh index a08c02abde12..7f7d20f22207 100755 --- a/tools/testing/selftests/drivers/net/netdevsim/devlink.sh +++ b/tools/testing/selftests/drivers/net/netdevsim/devlink.sh @@ -17,6 +17,18 @@ SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV_NAME/net/ DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV_NAME/ DL_HANDLE=netdevsim/$DEV_NAME +wait_for_devlink() +{ + "$@" | grep -q $DL_HANDLE +} + +devlink_wait() +{ + local timeout=$1 + + busywait "$timeout" wait_for_devlink devlink dev +} + fw_flash_test() { RET=0 @@ -256,6 +268,9 @@ netns_reload_test() ip netns del testns2 ip netns del testns1 + # Wait until netns async cleanup is done. + devlink_wait 2000 + log_test "netns reload test" } @@ -348,6 +363,9 @@ resource_test() ip netns del testns2 ip netns del testns1 + # Wait until netns async cleanup is done. + devlink_wait 2000 + log_test "resource test" } -- 2.39.0

2 years, 4 months

3
2
0 0

[PATCH 0/1] selftest: fib_tests: Always cleanup before exit

by Roxana Nicolescu

Usually when a subtest is executed, setup and cleanup functions are linearly called at the beginning and end of it. In some of them, `set -e` is used before executing commands. If one of the commands returns a non zero code, the whole script exists without cleaning up the resources allocated at setup. This can affect the next tests that use the same resources, leading to a chain of failures. To be consistent with other tests, calling cleanup function when the script exists fixes the issue. Steps to reproduce it: 1. Build with CONFIG_IP_ROUTE_MULTIPATH disabled. 2. Run net kselftest suite 3. fib_tests:fib_unreg_multipath_test fails when executing `ip -netns ns1 route add 203.0.113.0/24 nexthop via 198.51.100.2 dev dummy0 nexthop via 192.0.2.2 dev dummy1` because CONFIG_IP_ROUTE_MULTIPATH is disabled. This results in resources allocated during setup (e.g namespace ns1) not being cleaned up. 4. When icmp.sh tries to create namespace ns1 during its setup, it fails with the following error: Cannot create namespace file "/run/netns/ns1": File exists Roxana Nicolescu (1): selftest: fib_tests: Always cleanup before exit tools/testing/selftests/net/fib_tests.sh | 2 ++ 1 file changed, 2 insertions(+) -- 2.34.1

2 years, 4 months

2
2
0 0

[PATCH 00/34] selftests: Fix incorrect kernel headers search path

by Mathieu Desnoyers

Hi, This series fixes incorrect kernel header search path in kernel selftests. Near the end of the series, a few changes are not tagged as "Fixes" because the current behavior is to rely on the kernel sources uapi files rather than on the installed kernel header files. Nevertheless, those are updated for consistency. There are situations where "../../../../include/" was added to -I search path, which is bogus for userspace tests and caused issues with types.h. Those are removed. Thanks, Mathieu Mathieu Desnoyers (34): selftests: arm64: Fix incorrect kernel headers search path selftests: bpf: Fix incorrect kernel headers search path selftests: clone3: Fix incorrect kernel headers search path selftests: core: Fix incorrect kernel headers search path selftests: dma: Fix incorrect kernel headers search path selftests: dmabuf-heaps: Fix incorrect kernel headers search path selftests: drivers: Fix incorrect kernel headers search path selftests: filesystems: Fix incorrect kernel headers search path selftests: futex: Fix incorrect kernel headers search path selftests: gpio: Fix incorrect kernel headers search path selftests: ipc: Fix incorrect kernel headers search path selftests: kcmp: Fix incorrect kernel headers search path selftests: media_tests: Fix incorrect kernel headers search path selftests: membarrier: Fix incorrect kernel headers search path selftests: mount_setattr: Fix incorrect kernel headers search path selftests: move_mount_set_group: Fix incorrect kernel headers search path selftests: net: Fix incorrect kernel headers search path selftests: perf_events: Fix incorrect kernel headers search path selftests: pid_namespace: Fix incorrect kernel headers search path selftests: pidfd: Fix incorrect kernel headers search path selftests: powerpc: Fix incorrect kernel headers search path selftests: ptp: Fix incorrect kernel headers search path selftests: rseq: Fix incorrect kernel headers search path selftests: sched: Fix incorrect kernel headers search path selftests: seccomp: Fix incorrect kernel headers search path selftests: sync: Fix incorrect kernel headers search path selftests: user_events: Fix incorrect kernel headers search path selftests: vm: Fix incorrect kernel headers search path selftests: x86: Fix incorrect kernel headers search path selftests: bpf docs: Use installed kernel headers search path selftests: iommu: Use installed kernel headers search path selftests: memfd: Use installed kernel headers search path selftests: ptrace: Use installed kernel headers search path selftests: tdx: Use installed kernel headers search path tools/testing/selftests/arm64/fp/Makefile | 2 +- tools/testing/selftests/arm64/tags/Makefile | 2 +- tools/testing/selftests/bpf/Makefile | 2 +- tools/testing/selftests/bpf/Makefile.docs | 2 +- tools/testing/selftests/clone3/Makefile | 2 +- tools/testing/selftests/core/Makefile | 2 +- tools/testing/selftests/dma/Makefile | 2 +- tools/testing/selftests/dmabuf-heaps/Makefile | 2 +- tools/testing/selftests/dmabuf-heaps/dmabuf-heap.c | 3 +-- tools/testing/selftests/drivers/dma-buf/Makefile | 2 +- tools/testing/selftests/drivers/s390x/uvdevice/Makefile | 3 +-- tools/testing/selftests/filesystems/Makefile | 2 +- tools/testing/selftests/filesystems/binderfs/Makefile | 2 +- tools/testing/selftests/filesystems/epoll/Makefile | 2 +- tools/testing/selftests/futex/functional/Makefile | 2 +- tools/testing/selftests/gpio/Makefile | 2 +- tools/testing/selftests/iommu/Makefile | 3 +-- tools/testing/selftests/ipc/Makefile | 2 +- tools/testing/selftests/kcmp/Makefile | 2 +- tools/testing/selftests/media_tests/Makefile | 2 +- tools/testing/selftests/membarrier/Makefile | 2 +- tools/testing/selftests/memfd/Makefile | 4 +--- tools/testing/selftests/mount_setattr/Makefile | 2 +- tools/testing/selftests/move_mount_set_group/Makefile | 2 +- tools/testing/selftests/net/Makefile | 2 +- tools/testing/selftests/net/bpf/Makefile | 2 +- tools/testing/selftests/net/mptcp/Makefile | 2 +- tools/testing/selftests/net/openvswitch/Makefile | 2 +- tools/testing/selftests/perf_events/Makefile | 2 +- tools/testing/selftests/pid_namespace/Makefile | 2 +- tools/testing/selftests/pidfd/Makefile | 2 +- tools/testing/selftests/powerpc/ptrace/Makefile | 2 +- tools/testing/selftests/powerpc/security/Makefile | 2 +- tools/testing/selftests/powerpc/syscalls/Makefile | 2 +- tools/testing/selftests/powerpc/tm/Makefile | 2 +- tools/testing/selftests/ptp/Makefile | 2 +- tools/testing/selftests/ptrace/Makefile | 2 +- tools/testing/selftests/rseq/Makefile | 2 +- tools/testing/selftests/sched/Makefile | 2 +- tools/testing/selftests/seccomp/Makefile | 2 +- tools/testing/selftests/sync/Makefile | 2 +- tools/testing/selftests/tdx/Makefile | 2 +- tools/testing/selftests/tdx/tdx_guest_test.c | 2 +- tools/testing/selftests/user_events/Makefile | 2 +- tools/testing/selftests/vm/Makefile | 2 +- tools/testing/selftests/x86/Makefile | 2 +- 46 files changed, 46 insertions(+), 51 deletions(-) -- 2.25.1

2 years, 4 months

8
62
0 0

[RESEND RFC PATCH v8 0/3] Intel FRED architecture support for the sysret_rip selftest

by Ammar Faizi

[ RESEND, get rid of: Linux x86-64 Mailing List <linux-x86_64(a)vger.kernel.org> from the CC list. It bounces and makes noise. Sorry for the wrong address. ] Hi, This is an RFC v8. Based on the x86/cpu branch in the tip tree. The 'syscall' instruction on the Intel FRED architecture does not clobber %rcx and %r11. This behavior leads to an assertion failure in the sysret_rip selftest because it asserts %r11 = %rflags. In the previous discussion, we agreed that there are two cases for 'syscall': A) 'syscall' in a FRED system preserves %rcx and %r11. B) 'syscall' in a non-FRED system sets %rcx=%rip and %r11=%rflags. This series fixes the selftest. Make it work on the Intel FRED architecture. Also, add more tests to ensure the syscall behavior is consistent. It must always be (A) or always be (B). Not a mix of them. See the previous discussion here: https://lore.kernel.org/lkml/5d4ad3e3-034f-c7da-d141-9c001c2343af@intel.com ## Changelog revision v8: - Stop using "+r"(rsp) to avoid the red zone problem because it generates the wrong Assembly code (Ammar). See: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108799 - Update commit message (Ammar). v7: - Fix comment, REGS_ERROR no longer exists in the enum (Ammar). - Update commit message (Ammar). v6: - Move the check-regs assertion in sigusr1() to check_regs_result() (HPA). - Add a new test just like sigusr1(), but don't modify REG_RCX and REG_R11. This is used to test SYSRET behavior consistency (HPA). v5: - Fix do_syscall() return value (Ammar). v4: - Fix the assertion condition inside the SIGUSR1 handler (Xin Li). - Explain the purpose of patch #2 in the commit message (HPA). - Update commit message (Ammar). - Repeat test_syscall_rcx_r11_consistent() 32 times to be more sure that the result is really consistent (Ammar). v3: - Test that we don't get a mix of REGS_SAVED and REGS_SYSRET, which is a major part of the point (HPA). v2: - Use "+r"(rsp) as the right way to avoid redzone problems per Andrew's comment (HPA). Co-developed-by: H. Peter Anvin (Intel) <hpa(a)zytor.com> Signed-off-by: H. Peter Anvin (Intel) <hpa(a)zytor.com> Signed-off-by: Ammar Faizi <ammarfaizi2(a)gnuweeb.org> --- Ammar Faizi (3): selftests/x86: sysret_rip: Handle syscall on the Intel FRED architecture selftests/x86: sysret_rip: Add more tests to verify the 'syscall' behavior selftests/x86: sysret_rip: Test SYSRET with a signal handler tools/testing/selftests/x86/sysret_rip.c | 169 +++++++++++++++++++++-- 1 file changed, 160 insertions(+), 9 deletions(-) base-commit: e067248949e3de7fbeae812b0ccbbee7a401e7aa -- Ammar Faizi

2 years, 4 months

1
3
0 0

[RFC PATCH v8 0/3] Intel FRED architecture support for the sysret_rip selftest

by Ammar Faizi

Hi, This is an RFC v8. Based on the x86/cpu branch in the tip tree. The 'syscall' instruction on the Intel FRED architecture does not clobber %rcx and %r11. This behavior leads to an assertion failure in the sysret_rip selftest because it asserts %r11 = %rflags. In the previous discussion, we agreed that there are two cases for 'syscall': A) 'syscall' in a FRED system preserves %rcx and %r11. B) 'syscall' in a non-FRED system sets %rcx=%rip and %r11=%rflags. This series fixes the selftest. Make it work on the Intel FRED architecture. Also, add more tests to ensure the syscall behavior is consistent. It must always be (A) or always be (B). Not a mix of them. See the previous discussion here: https://lore.kernel.org/lkml/5d4ad3e3-034f-c7da-d141-9c001c2343af@intel.com ## Changelog revision v8: - Stop using "+r"(rsp) to avoid the red zone problem because it generates the wrong Assembly code (Ammar). See: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108799 - Update commit message (Ammar). v7: - Fix comment, REGS_ERROR no longer exists in the enum (Ammar). - Update commit message (Ammar). v6: - Move the check-regs assertion in sigusr1() to check_regs_result() (HPA). - Add a new test just like sigusr1(), but don't modify REG_RCX and REG_R11. This is used to test SYSRET behavior consistency (HPA). v5: - Fix do_syscall() return value (Ammar). v4: - Fix the assertion condition inside the SIGUSR1 handler (Xin Li). - Explain the purpose of patch #2 in the commit message (HPA). - Update commit message (Ammar). - Repeat test_syscall_rcx_r11_consistent() 32 times to be more sure that the result is really consistent (Ammar). v3: - Test that we don't get a mix of REGS_SAVED and REGS_SYSRET, which is a major part of the point (HPA). v2: - Use "+r"(rsp) as the right way to avoid redzone problems per Andrew's comment (HPA). Co-developed-by: H. Peter Anvin (Intel) <hpa(a)zytor.com> Signed-off-by: H. Peter Anvin (Intel) <hpa(a)zytor.com> Signed-off-by: Ammar Faizi <ammarfaizi2(a)gnuweeb.org> --- Ammar Faizi (3): selftests/x86: sysret_rip: Handle syscall on the Intel FRED architecture selftests/x86: sysret_rip: Add more tests to verify the 'syscall' behavior selftests/x86: sysret_rip: Test SYSRET with a signal handler tools/testing/selftests/x86/sysret_rip.c | 169 +++++++++++++++++++++-- 1 file changed, 160 insertions(+), 9 deletions(-) base-commit: e067248949e3de7fbeae812b0ccbbee7a401e7aa -- Ammar Faizi

2 years, 4 months

1
3
0 0

[PATCH v2 0/7] Overhauling amx_test

by Mingwei Zhang

AMX architecture involves several entities such as xstate, XCR0, IA32_XFD. This series add several missing checks on top of the existing amx_test. v1 -> v2: - Add a working xstate data structure suggested by seanjc. - Split the checking of CR0.TS from the checking of XFD. - Fix all the issues pointed by in review. v1: https://lore.kernel.org/all/20230110185823.1856951-1-mizhang@google.com/ Mingwei Zhang (7): KVM: selftests: x86: Fix an error in comment of amx_test KVM: selftests: x86: Add a working xstate data structure KVM: selftests: x86: Add check of CR0.TS in the #NM handler in amx_test KVM: selftests: Add the XFD check to IA32_XFD in #NM handler KVM: selftests: Fix the checks to XFD_ERR using and operation KVM: selftests: x86: Enable checking on xcomp_bv in amx_test KVM: selftests: x86: Repeat the checking of xheader when IA32_XFD[XTILEDATA] is set in amx_test .../selftests/kvm/include/x86_64/processor.h | 12 ++++ tools/testing/selftests/kvm/x86_64/amx_test.c | 59 ++++++++++--------- 2 files changed, 43 insertions(+), 28 deletions(-) -- 2.39.1.581.gbfd45094c4-goog

2 years, 4 months

3
15
0 0

[5.15] Please apply 'selftest/lkdtm: Skip stack-entropy test if lkdtm is not available'

by Andrew Paniakin

commit 90091c367e74d5b58d9ebe979cc363f7468f58d3 upstream. This patch fixes the stack-entropy.sh test to exit gracefully when the LKDTM is not available. Test will hang otherwise as reported in [1]. Applicability of this fix to other LTS kernels: - 4.14: No lkdtm selftest - 4.19: No lkdtm selftest - 5.4: No lkdtm selftests - 5.10: Inital selftest version introduced in 46d1a0f03d661 ("selftests/lkdtm: Add tests for LKDTM targets") is a single script which has the LKDTM availability check - 6.1: Fix applied This patch applies cleanly to stable-5.15 tree. Updated test was executed in Qemu VM with different kernels: - CONFIG_LKDTM not enabled. Test finished with status SKIP. - CONFIG_LKDTM enabled. Test failed (but not hanged) with error 'Stack entropy is low'. - CONFIG_LKDTM enabled and randomize_kstack_offset=on boot argument provided. Test succeed. [1] https://lore.kernel.org/lkml/2836f48a-d4e2-7f00-f06c-9f556fbd6332@linuxfoun…

2 years, 4 months

2
1
0 0

[RFC PATCH v2 0/2] selftests/x86: sysret_rip update for FRED system

by Ammar Faizi

From: Ammar Faizi <ammarfaizi2(a)gnuweeb.org> This is an RFC patchset v2. Xin Li reported sysret_rip test fails at: assert(ctx->uc_mcontext.gregs[REG_EFL] == ctx->uc_mcontext.gregs[REG_R11]); in a FRED system. Handle the FRED system scenario too. There are two patches in this series. Comments welcome... Note: This patchset is only tested for 'syscall' sets %rcx=%rip and %r11=%rflags case. I don't have a FRED system to test it. How to test this: $ make -C tools/testing/selftests/x86 $ tools/testing/selftests/x86/sysret_rip_64 Link: https://lore.kernel.org/lkml/5d4ad3e3-034f-c7da-d141-9c001c2343af@intel.com Signed-off-by: Ammar Faizi <ammarfaizi2(a)gnuweeb.org> --- ## Changelog v2: - Use "+r"(rsp) as the right way to avoid redzone problems per Andrew's comment (hpa). (Ref: https://lore.kernel.org/lkml/8f5c24df-514d-5d89-f58f-ec8c3eb1e049@zytor.com ) --- Ammar Faizi (2): selftests/x86: sysret_rip: Handle syscall in a FRED system selftests/x86: sysret_rip: Add more syscall tests with respect to `%rcx` and `%r11` tools/testing/selftests/x86/sysret_rip.c | 105 ++++++++++++++++++++++- 1 file changed, 104 insertions(+), 1 deletion(-) base-commit: e12ad468c22065a2826b2fc4c11d2113a7975301 -- Ammar Faizi

2 years, 4 months

4
53
0 0

[RFC PATCH v3 00/31] TDX KVM selftests

by Ackerley Tng

Hello, This is v3 of the patch series for TDX selftests. It has been updated for Intel’s V10 of the TDX host patches which was proposed in https://lkml.org/lkml/2022/8/8/877 The tree can be found at https://github.com/googleprodkernel/linux-cc/tree/tdx-selftests-rfc-v3/ Changes from RFC v2: Selftest setup now builds upon the KVM selftest framework when setting up the guest for testing. We now use the KVM selftest framework to build the guest page tables and load the ELF binary into guest memory. Inlining of the entire guest image is no longer required and that allows us to cleanly separate code into different compilation units and be able to use proper assembly instead of inline assembly (addresses Sean’s comment). To achieve this, we take a dependency on the SEV VM tests: https://lore.kernel.org/lkml/20221018205845.770121-1-pgonda@google.com/T/. Those patches provide functions for the host to allocate and track protected memory in the guest. In RFCv3, TDX selftest code is organized into: + headers in tools/testing/selftests/kvm/include/x86_64/tdx/ + common code in tools/testing/selftests/kvm/lib/x86_64/tdx/ + selftests in tools/testing/selftests/kvm/x86_64/tdx_* RFCv3 also adds additional selftests for UPM. Dependencies + Peter’s patches, which provide functions for the host to allocate and track protected memory in the guest. https://lore.kernel.org/lkml/20221018205845.770121-1-pgonda@google.com/T/ + Peter’s patches depend on Sean’s patches: + https://lore.kernel.org/linux-arm-kernel/20220825232522.3997340-1-seanjc@go… + https://lore.kernel.org/lkml/20221006004512.666529-1-seanjc@google.com/T/ + Proposed fixes for these these issues mentioned on the mailing list + https://lore.kernel.org/lkml/36cde6d6-128d-884e-1447-09b08bb5de3d@intel.com/ + https://lore.kernel.org/lkml/diqzedtubs0d.fsf@google.com/ + https://lore.kernel.org/lkml/67b782ee-c95c-d6bc-3cca-cdfe75f4bf6a@intel.com/ + https://lore.kernel.org/lkml/diqzcz7cd983.fsf@ackerleytng-cloudtop-sg.c.goo… + https://lore.kernel.org/linux-mm/20221116205025.1510291-1-ackerleytng@googl… Further work for this patch series/TODOs + Sean’s comments for the non-confidential UPM selftests patch series at https://lore.kernel.org/lkml/Y8dC8WDwEmYixJqt@google.com/T/#u apply here as well + Add ucall support for TDX selftests I would also like to acknowledge the following people, who helped review or test patches in RFCv1 and RFCv2: + Sean Christopherson <seanjc(a)google.com> + Zhenzhong Duan <zhenzhong.duan(a)intel.com> + Peter Gonda <pgonda(a)google.com> + Andrew Jones <drjones(a)redhat.com> + Maxim Levitsky <mlevitsk(a)redhat.com> + Xiaoyao Li <xiaoyao.li(a)intel.com> + David Matlack <dmatlack(a)google.com> + Marc Orr <marcorr(a)google.com> + Isaku Yamahata <isaku.yamahata(a)gmail.com> Links to earlier patch series + RFC v1: https://lore.kernel.org/lkml/20210726183816.1343022-1-erdemaktas@google.com… + RFC v2: https://lore.kernel.org/lkml/20220830222000.709028-1-sagis@google.com/T/#u Ackerley Tng (14): KVM: selftests: Add function to allow one-to-one GVA to GPA mappings KVM: selftests: Expose function that sets up sregs based on VM's mode KVM: selftests: Store initial stack address in struct kvm_vcpu KVM: selftests: Refactor steps in vCPU descriptor table initialization KVM: selftests: TDX: Use KVM_TDX_CAPABILITIES to validate TDs' attribute configuration KVM: selftests: Require GCC to realign stacks on function entry KVM: selftests: Add functions to allow mapping as shared KVM: selftests: Add support for restricted memory KVM: selftests: TDX: Update load_td_memory_region for VM memory backed by restricted memfd KVM: selftests: Expose _vm_vaddr_alloc KVM: selftests: TDX: Add support for TDG.MEM.PAGE.ACCEPT KVM: selftests: TDX: Add support for TDG.VP.VEINFO.GET KVM: selftests: TDX: Add TDX UPM selftest KVM: selftests: TDX: Add TDX UPM selftests for implicit conversion Erdem Aktas (4): KVM: selftests: Add support for creating non-default type VMs KVM: selftests: Add helper functions to create TDX VMs KVM: selftests: TDX: Add TDX lifecycle test KVM: selftests: TDX: Adding test case for TDX port IO Roger Wang (1): KVM: selftests: TDX: Add TDG.VP.INFO test Ryan Afranji (2): KVM: selftests: TDX: Verify the behavior when host consumes a TD private memory KVM: selftests: TDX: Add shared memory test Sagi Shahar (10): KVM: selftests: TDX: Add report_fatal_error test KVM: selftests: TDX: Add basic TDX CPUID test KVM: selftests: TDX: Add basic get_td_vmcall_info test KVM: selftests: TDX: Add TDX IO writes test KVM: selftests: TDX: Add TDX IO reads test KVM: selftests: TDX: Add TDX MSR read/write tests KVM: selftests: TDX: Add TDX HLT exit test KVM: selftests: TDX: Add TDX MMIO reads test KVM: selftests: TDX: Add TDX MMIO writes test KVM: selftests: TDX: Add TDX CPUID TDVMCALL test tools/testing/selftests/kvm/.gitignore | 3 + tools/testing/selftests/kvm/Makefile | 10 +- .../selftests/kvm/include/kvm_util_base.h | 43 +- .../testing/selftests/kvm/include/test_util.h | 2 + .../selftests/kvm/include/x86_64/processor.h | 4 + .../kvm/include/x86_64/tdx/td_boot.h | 82 + .../kvm/include/x86_64/tdx/td_boot_asm.h | 16 + .../selftests/kvm/include/x86_64/tdx/tdcall.h | 59 + .../selftests/kvm/include/x86_64/tdx/tdx.h | 65 + .../kvm/include/x86_64/tdx/tdx_util.h | 19 + .../kvm/include/x86_64/tdx/test_util.h | 164 ++ tools/testing/selftests/kvm/lib/kvm_util.c | 123 +- tools/testing/selftests/kvm/lib/test_util.c | 7 + .../selftests/kvm/lib/x86_64/processor.c | 77 +- tools/testing/selftests/kvm/lib/x86_64/sev.c | 2 +- .../selftests/kvm/lib/x86_64/tdx/td_boot.S | 101 ++ .../selftests/kvm/lib/x86_64/tdx/tdcall.S | 158 ++ .../selftests/kvm/lib/x86_64/tdx/tdx.c | 231 +++ .../selftests/kvm/lib/x86_64/tdx/tdx_util.c | 562 +++++++ .../selftests/kvm/lib/x86_64/tdx/test_util.c | 101 ++ .../kvm/x86_64/tdx_shared_mem_test.c | 137 ++ .../selftests/kvm/x86_64/tdx_upm_test.c | 460 ++++++ .../selftests/kvm/x86_64/tdx_vm_tests.c | 1329 +++++++++++++++++ 23 files changed, 3709 insertions(+), 46 deletions(-) create mode 100644 tools/testing/selftests/kvm/include/x86_64/tdx/td_boot.h create mode 100644 tools/testing/selftests/kvm/include/x86_64/tdx/td_boot_asm.h create mode 100644 tools/testing/selftests/kvm/include/x86_64/tdx/tdcall.h create mode 100644 tools/testing/selftests/kvm/include/x86_64/tdx/tdx.h create mode 100644 tools/testing/selftests/kvm/include/x86_64/tdx/tdx_util.h create mode 100644 tools/testing/selftests/kvm/include/x86_64/tdx/test_util.h create mode 100644 tools/testing/selftests/kvm/lib/x86_64/tdx/td_boot.S create mode 100644 tools/testing/selftests/kvm/lib/x86_64/tdx/tdcall.S create mode 100644 tools/testing/selftests/kvm/lib/x86_64/tdx/tdx.c create mode 100644 tools/testing/selftests/kvm/lib/x86_64/tdx/tdx_util.c create mode 100644 tools/testing/selftests/kvm/lib/x86_64/tdx/test_util.c create mode 100644 tools/testing/selftests/kvm/x86_64/tdx_shared_mem_test.c create mode 100644 tools/testing/selftests/kvm/x86_64/tdx_upm_test.c create mode 100644 tools/testing/selftests/kvm/x86_64/tdx_vm_tests.c -- 2.39.0.246.g2a6d74b583-goog

2 years, 4 months

4
42
0 0

[PATCH 00/17] Add Intel VT-d nested translation

by Yi Liu

Nested translation has two stage address translations to get the final physical addresses. Take Intel VT-d as an example, the first stage translation structure is I/O page table. As the below diagram shows, guest I/O page table pointer in GPA (guest physical address) is passed to host to do the first stage translation. Along with it, guest modifications to present mappings in the first stage page should be followed with an iotlb invalidation to sync host iotlb. .-------------. .---------------------------. | vIOMMU | | Guest I/O page table | | | '---------------------------' .----------------/ | PASID Entry |--- PASID cache flush --+ '-------------' | | | V | | I/O page table pointer in GPA '-------------' Guest ------| Shadow |--------------------------|-------- v v v Host .-------------. .------------------------. | pIOMMU | | FS for GIOVA->GPA | | | '------------------------' .----------------/ | | PASID Entry | V (Nested xlate) '----------------\.----------------------------------. | | | SS for GPA->HPA, unmanaged domain| | | '----------------------------------' '-------------' Where: - FS = First stage page tables - SS = Second stage page tables <Intel VT-d Nested translation> Different platform vendors have different first stage translation formats, so userspace should query the underlying iommu capability before setting first stage translation structures to host.[1] In iommufd subsystem, I/O page tables would be tracked by hw_pagetable objects. First stage page table is owned by userspace (guest), while second stage page table is owned by kernel for security. So First stage page tables are tracked by user-managed hw_pagetable, second stage page tables are tracked by kernel- managed hw_pagetable. This series first introduces new iommu op for allocating domains for iommufd, and op for syncing iotlb for first stage page table modifications, and then add the implementation of the new ops in intel-iommu driver. After this preparation, adds kernel-managed and user-managed hw_pagetable allocation for userspace. Last, add self-test for the new ioctls. This series is based on "[PATCH 0/6] iommufd: Add iommu capability reporting"[1] and Nicolin's "[PATCH v2 00/10] Add IO page table replacement support"[2]. Complete code can be found in[3]. Draft Qemu code can be found in[4]. Basic test done with DSA device on VT-d. Where the guest has a vIOMMU built with nested translation. [1] https://lore.kernel.org/linux-iommu/20230209041642.9346-1-yi.l.liu@intel.co… [2] https://lore.kernel.org/linux-iommu/cover.1675802050.git.nicolinc@nvidia.co… [3] https://github.com/yiliu1765/iommufd/tree/iommufd_nesting_vtd_v1 [4] https://github.com/yiliu1765/qemu/tree/wip/iommufd_rfcv3%2Bnesting Regards, Yi Liu Lu Baolu (5): iommu: Add new iommu op to create domains owned by userspace iommu: Add nested domain support iommu/vt-d: Extend dmar_domain to support nested domain iommu/vt-d: Add helper to setup pasid nested translation iommu/vt-d: Add nested domain support Nicolin Chen (6): iommufd: Add/del hwpt to IOAS at alloc/destroy() iommufd/device: Move IOAS attaching and detaching operations into helpers iommufd/selftest: Add IOMMU_TEST_OP_MOCK_DOMAIN_REPLACE test op iommufd/selftest: Add coverage for IOMMU_HWPT_ALLOC ioctl iommufd/selftest: Add IOMMU_TEST_OP_MD_CHECK_IOTLB test op iommufd/selftest: Add coverage for IOMMU_HWPT_INVALIDATE ioctl Yi Liu (6): iommufd/hw_pagetable: Use domain_alloc_user op for domain allocation iommufd: Split iommufd_hw_pagetable_alloc() iommufd: Add kernel-managed hw_pagetable allocation for userspace iommufd: Add infrastructure for user-managed hw_pagetable allocation iommufd: Add user-managed hw_pagetable allocation iommufd/device: Report supported stage-1 page table types drivers/iommu/intel/Makefile | 2 +- drivers/iommu/intel/iommu.c | 38 ++- drivers/iommu/intel/iommu.h | 50 +++- drivers/iommu/intel/nested.c | 143 +++++++++ drivers/iommu/intel/pasid.c | 142 +++++++++ drivers/iommu/intel/pasid.h | 2 + drivers/iommu/iommufd/device.c | 117 ++++---- drivers/iommu/iommufd/hw_pagetable.c | 280 +++++++++++++++++- drivers/iommu/iommufd/iommufd_private.h | 23 +- drivers/iommu/iommufd/iommufd_test.h | 35 +++ drivers/iommu/iommufd/main.c | 11 + drivers/iommu/iommufd/selftest.c | 149 +++++++++- include/linux/iommu.h | 11 + include/uapi/linux/iommufd.h | 196 ++++++++++++ tools/testing/selftests/iommu/iommufd.c | 124 +++++++- tools/testing/selftests/iommu/iommufd_utils.h | 106 +++++++ 16 files changed, 1329 insertions(+), 100 deletions(-) create mode 100644 drivers/iommu/intel/nested.c -- 2.34.1

2 years, 4 months

8
34
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror