- Linux-kselftest-mirror - lists.linaro.org

[PATCH] selftests: netfilter: ipvs.sh: Explicity disable rp_filter on interface tunl0

by Yi Chen

Although setup_ns() set net.ipv4.conf.default.rp_filter=0, loading certain module such as ipip will automatically create a tunl0 interface in all netns including new created ones, this in script is before than default.rp_filter=0 applied, as a result tunl0.rp_filter remains set to 1 which causes the test report FAIL when ipip module is preloaded. Before fix: Testing DR mode... Testing NAT mode... Testing Tunnel mode... ipvs.sh: FAIL After fix: Testing DR mode... Testing NAT mode... Testing Tunnel mode... ipvs.sh: PASS Fixes: ("7c8b89ec5 selftests: netfilter: remove rp_filter configuration") Signed-off-by: Yi Chen <yiche(a)redhat.com> --- tools/testing/selftests/net/netfilter/ipvs.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/net/netfilter/ipvs.sh b/tools/testing/selftests/net/netfilter/ipvs.sh index 6af2ea3ad6b8..9c9d5b38ab71 100755 --- a/tools/testing/selftests/net/netfilter/ipvs.sh +++ b/tools/testing/selftests/net/netfilter/ipvs.sh @@ -151,7 +151,7 @@ test_nat() { test_tun() { ip netns exec "${ns0}" ip route add "${vip_v4}" via "${gip_v4}" dev br0 - ip netns exec "${ns1}" modprobe -q ipip + modprobe -q ipip ip netns exec "${ns1}" ip link set tunl0 up ip netns exec "${ns1}" sysctl -qw net.ipv4.ip_forward=0 ip netns exec "${ns1}" sysctl -qw net.ipv4.conf.all.send_redirects=0 @@ -160,10 +160,10 @@ test_tun() { ip netns exec "${ns1}" ipvsadm -a -i -t "${vip_v4}:${port}" -r ${rip_v4}:${port} ip netns exec "${ns1}" ip addr add ${vip_v4}/32 dev lo:1 - ip netns exec "${ns2}" modprobe -q ipip ip netns exec "${ns2}" ip link set tunl0 up ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.all.arp_ignore=1 ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.all.arp_announce=2 + ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.tunl0.rp_filter=0 ip netns exec "${ns2}" ip addr add "${vip_v4}/32" dev lo:1 test_service -- 2.50.1

1 month, 3 weeks

2
1
0 0

[PATCH v26 net-next 0/6] DUALPI2 patch

by chia-yu.chang＠nokia-bell-labs.com

From: Chia-Yu Chang <chia-yu.chang(a)nokia-bell-labs.com> Hello, Please find the DualPI2 patch v26. This patch serise adds DualPI Improved with a Square (DualPI2) with following features: * Supports congestion controls that comply with the Prague requirements in RFC9331 (e.g. TCP-Prague) * Coupled dual-queue that separates the L4S traffic in a low latency queue (L-queue), without harming remaining traffic that is scheduled in classic queue (C-queue) due to congestion-coupling using PI2 as defined in RFC9332 * Configurable overload strategies * Use of sojourn time to reliably estimate queue delay * Supports ECN L4S-identifier (IP.ECN==0b*1) to classify traffic into respective queues For more details of DualPI2, please refer IETF RFC9332 (https://datatracker.ietf.org/doc/html/rfc9332). Best regards, Chia-Yu --- v25 (19-Jul-2025) and v26 (22-Jul-2025) - Restruct to avoid using lock and unlock when both step_thresh are provided (Jakub Kicinski <kuba(a)kernel.org>) v24 (18-Jul-2025) - Replace TCA_DUALPI2 prefix with TC_DUALPI2 for enums in pkt_sched.h (Jakub Kicinski <kuba(a)kernel.org>) - Report error if both packet and time step thresholds are provided (Jakub Kicinski <kuba(a)kernel.org>) v22 (11-Jul-2025) and v23 (13-Jul-2025) - Fix issue when user would like to change DualPI2 but provides an empty TCA_OPTIONS with no nested attributes (Paolo Abeni <pabeni(a)redhat.com>, Jakub Kicinski <kuba(a)kernel.org>) v21 (02-Jul-2025) - Replace STEP_THRESH and STEP_PACKETS with STEP_THRESH_PKTS and STEP_THRESH_US (Jakub Kicinski <kuba(a)kernel.org>) - Move READ_ONCE and WRITE_ONCE to later DualPI2 patches (Jakub Kicinski <kuba(a)kernel.org>) - Replace NLA_POLICY_FULL_RANGE with NLA_POLICY_RANGE (Jakub Kicinski <kuba(a)kernel.org>) - Set extra error message for dualpi2_change (Jakub Kicinski <kuba(a)kernel.org>) - Drop redundant else for better readability (Paolo Abeni <pabeni(a)redhat.com>) - Replace step-thresh and step-packets with step-thresh-pkts and step-thresh-us (Jakub Kicinski <kuba(a)kernel.org>) - Remove redundant name-prefix and simplify entries of dualpi2 enums (Jakub Kicinski <kuba(a)kernel.org>) - Fix some typos and format issues of dualpi2 attributes v20 (21-Jun-2025) - Add one more commit to fix warning and style check on tdc.sh reported by shellcheck - Remove double-prefixed of "tc_tc_dualpi2_attrs" in tc-user.h (Donald Hunter <donald.hunter(a)gmail.com>) v19 (14-Jun-2025) - Fix one typo in the comment of #1 (ALOK TIWARI <alok.a.tiwari(a)oracle.com>) - Update commit message of #4 (ALOK TIWARI <alok.a.tiwari(a)oracle.com>) - Wrap long lines of Documentation/netlink/specs/tc.yaml to within 80 characters (Jakub Kicinski <kuba(a)kernel.org>) v18 (13-Jun-2025) - Add the num of enum used by DualPI2 and fix name and name-prefix of DualPI2 enum and attribute - Replace from_timer() with timer_container_of() (Pedro Tammela <pctammela(a)mojatatu.com>) v17 (25-May-2025, Resent at 11-Jun-2025) - Replace 0xffffffff with U32_MAX (Paolo Abeni <pabeni(a)redhat.com>) - Use helper function qdisc_dequeue_internal() and add new helper function skb_apply_step() (Paolo Abeni <pabeni(a)redhat.com>) - Add s64 casting when calculating the delta of the PI controller (Paolo Abeni <pabeni(a)redhat.com>) - Change the drop reason into SKB_DROP_REASON_QDISC_CONGESTED for drop_early (Paolo Abeni <pabeni(a)redhat.com>) - Modify the condition to remove the original skb when enqueuing multiple GSO segments (Paolo Abeni <pabeni(a)redhat.com>) - Add READ_ONCE() in dualpi2_dump_stat() (Paolo Abeni <pabeni(a)redhat.com>) - Add comments, brackets, and brackets for readability (Paolo Abeni <pabeni(a)redhat.com>) v16 (16-MAy-2025) - Add qdisc_lock() to dualpi2_timer() in dualpi2_timer (Paolo Abeni <pabeni(a)redhat.com>) - Introduce convert_ns_to_usec() to convert usec to nsec without overflow in #1 (Paolo Abeni <pabeni(a)redhat.com>) - Update convert_us_tonsec() to convert nsec to usec without overflow in #2 (Paolo Abeni <pabeni(a)redhat.com>) - Add more descriptions with respect to DualPI2 in the cover ltter and add changelog in each patch (Paolo Abeni <pabeni(a)redhat.com>) v15 (09-May-2025) - Add enum of TCA_DUALPI2_ECN_MASK_CLA_ECT to remove potential leakeage in #1 (Simon Horman <horms(a)kernel.org>) - Fix one typo in comment of #2 - Update tc.yaml in #5 to aligh with the updated enum of pkt_sched.h v14 (05-May-2025) - Modify tc.yaml: (1) Replace flags with enum and remove enum-as-flags, (2) Remove credit-queue in xstats, and (3) Change attribute types (Donald Hunter <donald.hun - Add enum and fix the ordering of variables in pkt_sched.h to align with the modified tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Add validators for DROP_OVERLOAD, DROP_EARLY, ECN_MASK, and SPLIT_GSO in sch_dualpi2.c (Donald Hunter <donald.hunter(a)gmail.com>) - Update dualpi2.json to align with the updated variable order in pkt_sched.h - Reorder patches (Donald Hunter <donald.hunter(a)gmail.com>) v13 (26-Apr-2025) - Use dashes in member names to follow YNL conventions in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Define enumerations separately for flags of drop-early, drop-overload, ecn-mask, credit-queue in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Change the types of split-gso and step-packets into flag in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Revert to u32/u8 types for tc-dualpi2-xstats members in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Add new test cases in tc-tests/qdiscs/dualpi2.json to cover all dualpi2 parameters (Donald Hunter <donald.hunter(a)gmail.com>) - Change the type of TCA_DUALPI2_STEP_PACKETS into NLA_FLAG (Donald Hunter <donald.hunter(a)gmail.com>) v12 (22-Apr-2025) - Remove anonymous struct in sch_dualpi2.c (Paolo Abeni <pabeni(a)redhat.com>) - Replace u32/u8 with uint and s32 with int in tc spec document (Paolo Abeni <pabeni(a)redhat.com>) - Introduce get_memory_limit function to handle potential overflow when multipling limit with MTU (Paolo Abeni <pabeni(a)redhat.com>) - Double the packet length to further include packet overhead in memory_limit (Paolo Abeni <pabeni(a)redhat.com>) - Remove the check of qdisc_qlen(sch) when calling qdisc_tree_reduce_backlog (Paolo Abeni <pabeni(a)redhat.com>) v11 (15-Apr-2025) - Replace hstimer_init with hstimer_setup in sch_dualpi2.c v10 (25-Mar-2025) - Remove leftover include in include/linux/netdevice.h and anonymous struct in sch_dualpi2.c (Paolo Abeni <pabeni(a)redhat.com>) - Use kfree_skb_reason() and add SKB_DROP_REASON_DUALPI2_STEP_DROP drop reason (Paolo Abeni <pabeni(a)redhat.com>) - Split sch_dualpi2.c into 3 patches (and overall 5 patches): Struct definition & parsing, Dump stats & configuration, Enqueue/Dequeue (Paolo Abeni <pabeni(a)redhat.com>) v9 (16-Mar-2025) - Fix mem_usage error in previous version - Add min_qlen_step to the dualpi2 attribute as the minimum queue length in number of packets in the L-queue to start step threshold marking. In previous versions, this value was fixed to 2, so the step threshold was applied to mark packets in the L queue only when the queue length of the L queue was greater than or equal to 2 packets. This will cause larger queuing delays for L4S traffic at low rates (<20Mbps). So we parameterize it and change the default value to 0. Comparison of tcp_1down run 'HTB 20Mbit + DUALPI2 + 10ms base delay' Old versions: avg median # data pts Ping (ms) ICMP : 11.55 11.70 ms 350 TCP upload avg : 18.96 N/A Mbits/s 350 TCP upload sum : 18.96 N/A Mbits/s 350 New version (v9): avg median # data pts Ping (ms) ICMP : 10.81 10.70 ms 350 TCP upload avg : 18.91 N/A Mbits/s 350 TCP upload sum : 18.91 N/A Mbits/s 350 Comparison of tcp_1down run 'HTB 10Mbit + DUALPI2 + 10ms base delay' Old versions: avg median # data pts Ping (ms) ICMP : 12.61 12.80 ms 350 TCP upload avg : 9.48 N/A Mbits/s 350 TCP upload sum : 9.48 N/A Mbits/s 350 New version (v9): avg median # data pts Ping (ms) ICMP : 11.06 10.80 ms 350 TCP upload avg : 9.43 N/A Mbits/s 350 TCP upload sum : 9.43 N/A Mbits/s 350 Comparison of tcp_1down run 'HTB 10Mbit + DUALPI2 + 10ms base delay' Old versions: avg median # data pts Ping (ms) ICMP : 40.86 37.45 ms 350 TCP upload avg : 0.88 N/A Mbits/s 350 TCP upload sum : 0.88 N/A Mbits/s 350 TCP upload::1 : 0.88 0.97 Mbits/s 350 New version (v9): avg median # data pts Ping (ms) ICMP : 11.07 10.40 ms 350 TCP upload avg : 0.55 N/A Mbits/s 350 TCP upload sum : 0.55 N/A Mbits/s 350 TCP upload::1 : 0.55 0.59 Mbits/s 350 v8 (11-Mar-2025) - Fix warning messages in v7 v7 (07-Mar-2025) - Separate into 3 patches to avoid mixing changes of documentation, selftest, and code. (Cong Wang <xiyou.wangcong(a)gmail.com>) v6 (04-Mar-2025) - Add modprobe for dulapi2 in tc-testing script tc-testing/tdc.sh (Jakub Kicinski <kuba(a)kernel.org>) - Update test cases in dualpi2.json - Update commit message v5 (22-Feb-2025) - A comparison was done between MQ + DUALPI2, MQ + FQ_PIE, MQ + FQ_CODEL: Unshaped 1gigE with 4 download streams test: - Summary of tcp_4down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 1.19 1.34 ms 349 TCP download avg : 235.42 N/A Mbits/s 349 TCP download sum : 941.68 N/A Mbits/s 349 TCP download::1 : 235.19 235.39 Mbits/s 349 TCP download::2 : 235.03 235.35 Mbits/s 349 TCP download::3 : 236.89 235.44 Mbits/s 349 TCP download::4 : 234.57 235.19 Mbits/s 349 - Summary of tcp_4down run 'MQ + FQ_PIE' avg median # data pts Ping (ms) ICMP : 1.21 1.37 ms 350 TCP download avg : 235.42 N/A Mbits/s 350 TCP download sum : 941.61 N/A Mbits/s 350 TCP download::1 : 232.54 233.13 Mbits/s 350 TCP download::2 : 232.52 232.80 Mbits/s 350 TCP download::3 : 233.14 233.78 Mbits/s 350 TCP download::4 : 243.41 241.48 Mbits/s 350 - Summary of tcp_4down run 'MQ + DUALPI2' avg median # data pts Ping (ms) ICMP : 1.19 1.34 ms 349 TCP download avg : 235.42 N/A Mbits/s 349 TCP download sum : 941.68 N/A Mbits/s 349 TCP download::1 : 235.19 235.39 Mbits/s 349 TCP download::2 : 235.03 235.35 Mbits/s 349 TCP download::3 : 236.89 235.44 Mbits/s 349 TCP download::4 : 234.57 235.19 Mbits/s 349 Unshaped 1gigE with 128 download streams test: - Summary of tcp_128down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 1.88 1.86 ms 350 TCP download avg : 7.39 N/A Mbits/s 350 TCP download sum : 946.47 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + FQ_PIE': avg median # data pts Ping (ms) ICMP : 1.88 1.86 ms 350 TCP download avg : 7.39 N/A Mbits/s 350 TCP download sum : 946.47 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + DUALPI2': avg median # data pts Ping (ms) ICMP : 1.88 1.86 ms 350 TCP download avg : 7.39 N/A Mbits/s 350 TCP download sum : 946.47 N/A Mbits/s 350 Unshaped 10gigE with 4 download streams test: - Summary of tcp_4down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 0.22 0.23 ms 350 TCP download avg : 2354.08 N/A Mbits/s 350 TCP download sum : 9416.31 N/A Mbits/s 350 TCP download::1 : 2353.65 2352.81 Mbits/s 350 TCP download::2 : 2354.54 2354.21 Mbits/s 350 TCP download::3 : 2353.56 2353.78 Mbits/s 350 TCP download::4 : 2354.56 2354.45 Mbits/s 350 - Summary of tcp_4down run 'MQ + FQ_PIE': avg median # data pts Ping (ms) ICMP : 0.20 0.19 ms 350 TCP download avg : 2354.76 N/A Mbits/s 350 TCP download sum : 9419.04 N/A Mbits/s 350 TCP download::1 : 2354.77 2353.89 Mbits/s 350 TCP download::2 : 2353.41 2354.29 Mbits/s 350 TCP download::3 : 2356.18 2354.19 Mbits/s 350 TCP download::4 : 2354.68 2353.15 Mbits/s 350 - Summary of tcp_4down run 'MQ + DUALPI2': avg median # data pts Ping (ms) ICMP : 0.24 0.24 ms 350 TCP download avg : 2354.11 N/A Mbits/s 350 TCP download sum : 9416.43 N/A Mbits/s 350 TCP download::1 : 2354.75 2353.93 Mbits/s 350 TCP download::2 : 2353.15 2353.75 Mbits/s 350 TCP download::3 : 2353.49 2353.72 Mbits/s 350 TCP download::4 : 2355.04 2353.73 Mbits/s 350 Unshaped 10gigE with 128 download streams test: - Summary of tcp_128down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 7.57 8.69 ms 350 TCP download avg : 73.97 N/A Mbits/s 350 TCP download sum : 9467.82 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + FQ_PIE': avg median # data pts Ping (ms) ICMP : 7.82 8.91 ms 350 TCP download avg : 73.97 N/A Mbits/s 350 TCP download sum : 9468.42 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + DUALPI2': avg median # data pts Ping (ms) ICMP : 6.87 7.93 ms 350 TCP download avg : 73.95 N/A Mbits/s 350 TCP download sum : 9465.87 N/A Mbits/s 350 From the results shown above, we see small differences between combinations. - Update commit message to include results of no_split_gso and split_gso (Dave Taht <dave.taht(a)gmail.com> and Paolo Abeni <pabeni(a)redhat.com>) - Add memlimit in the dualpi2 attribute, and add memory_used, max_memory_used, memory_limit in dualpi2 stats (Dave Taht <dave.taht(a)gmail.com>) - Update note in sch_dualpi2.c related to BBRv3 status (Dave Taht <dave.taht(a)gmail.com>) - Update license identifier (Dave Taht <dave.taht(a)gmail.com>) - Add selftest in tools/testing/selftests/tc-testing (Cong Wang <xiyou.wangcong(a)gmail.com>) - Use netlink policies for parameter checks (Jamal Hadi Salim <jhs(a)mojatatu.com>) - Modify texts & fix typos in Documentation/netlink/specs/tc.yaml (Dave Taht <dave.taht(a)gmail.com>) - Add descriptions of packet counter statistics and the reset function of sch_dualpi2.c - Fix step_thresh in packets - Update code comments in sch_dualpi2.c v4 (22-Oct-2024) - Update statement in Kconfig for DualPI2 (Stephen Hemminger <stephen(a)networkplumber.org>) - Put a blank line after #define in sch_dualpi2.c (Stephen Hemminger <stephen(a)networkplumber.org>) - Fix line length warning. v3 (19-Oct-2024) - Fix compilaiton error - Update Documentation/netlink/specs/tc.yaml (Jakub Kicinski <kuba(a)kernel.org>) v2 (18-Oct-2024) - Add Documentation/netlink/specs/tc.yaml (Jakub Kicinski <kuba(a)kernel.org>) - Use dualpi2 instead of skb prefix (Jamal Hadi Salim <jhs(a)mojatatu.com>) - Replace nla_parse_nested_deprecated with nla_parse_nested (Jamal Hadi Salim <jhs(a)mojatatu.com>) - Fix line length warning --- Chia-Yu Chang (5): sched: Struct definition and parsing of dualpi2 qdisc sched: Dump configuration and statistics of dualpi2 qdisc selftests/tc-testing: Fix warning and style check on tdc.sh selftests/tc-testing: Add selftests for qdisc DualPI2 Documentation: netlink: specs: tc: Add DualPI2 specification Koen De Schepper (1): sched: Add enqueue/dequeue of dualpi2 qdisc Documentation/netlink/specs/tc.yaml | 151 ++- include/net/dropreason-core.h | 6 + include/uapi/linux/pkt_sched.h | 68 + net/sched/Kconfig | 12 + net/sched/Makefile | 1 + net/sched/sch_dualpi2.c | 1175 +++++++++++++++++ tools/testing/selftests/tc-testing/config | 1 + .../tc-testing/tc-tests/qdiscs/dualpi2.json | 254 ++++ tools/testing/selftests/tc-testing/tdc.sh | 6 +- 9 files changed, 1669 insertions(+), 5 deletions(-) create mode 100644 net/sched/sch_dualpi2.c create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/dualpi2.json -- 2.34.1

1 month, 3 weeks

2
7
0 0

[PATCH net-next] devlink: Fix excessive stack usage in rate TC bandwidth parsing

by Tariq Toukan

From: Carolina Jubran <cjubran(a)nvidia.com> The devlink_nl_rate_tc_bw_parse function uses a large stack array for devlink attributes, which triggers a warning about excessive stack usage: net/devlink/rate.c: In function 'devlink_nl_rate_tc_bw_parse': net/devlink/rate.c:382:1: error: the frame size of 1648 bytes is larger than 1536 bytes [-Werror=frame-larger-than=] Introduce a separate attribute set specifically for rate TC bandwidth parsing that only contains the two attributes actually used: index and bandwidth. This reduces the stack array from DEVLINK_ATTR_MAX entries to just 2 entries, solving the stack usage issue. Update devlink selftest to use the new 'index' and 'bw' attribute names consistent with the YAML spec. Example usage with ynl with the new spec: ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml \ --do rate-set --json '{ "bus-name": "pci", "dev-name": "0000:08:00.0", "port-index": 1, "rate-tc-bws": [ {"index": 0, "bw": 50}, {"index": 1, "bw": 50}, {"index": 2, "bw": 0}, {"index": 3, "bw": 0}, {"index": 4, "bw": 0}, {"index": 5, "bw": 0}, {"index": 6, "bw": 0}, {"index": 7, "bw": 0} ] }' ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml \ --do rate-get --json '{ "bus-name": "pci", "dev-name": "0000:08:00.0", "port-index": 1 }' output for rate-get: {'bus-name': 'pci', 'dev-name': '0000:08:00.0', 'port-index': 1, 'rate-tc-bws': [{'bw': 50, 'index': 0}, {'bw': 50, 'index': 1}, {'bw': 0, 'index': 2}, {'bw': 0, 'index': 3}, {'bw': 0, 'index': 4}, {'bw': 0, 'index': 5}, {'bw': 0, 'index': 6}, {'bw': 0, 'index': 7}], 'rate-tx-max': 0, 'rate-tx-priority': 0, 'rate-tx-share': 0, 'rate-tx-weight': 0, 'rate-type': 'leaf'} Fixes: 566e8f108fc7 ("devlink: Extend devlink rate API with traffic classes bandwidth management") Reported-by: Arnd Bergmann <arnd(a)arndb.de> Closes: https://lore.kernel.org/netdev/20250708160652.1810573-1-arnd@kernel.org/ Reported-by: kernel test robot <lkp(a)intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202507171943.W7DJcs6Y-lkp@intel.com/ Suggested-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Carolina Jubran <cjubran(a)nvidia.com> Tested-by: Carolina Jubran <cjubran(a)nvidia.com> Signed-off-by: Tariq Toukan <tariqt(a)nvidia.com> --- Documentation/netlink/specs/devlink.yaml | 26 ++++++++----------- include/uapi/linux/devlink.h | 11 ++++++-- net/devlink/netlink_gen.c | 6 ++--- net/devlink/netlink_gen.h | 2 +- net/devlink/rate.c | 20 +++++++------- .../drivers/net/hw/devlink_rate_tc_bw.py | 16 ++++++------ 6 files changed, 42 insertions(+), 39 deletions(-) diff --git a/Documentation/netlink/specs/devlink.yaml b/Documentation/netlink/specs/devlink.yaml index 1c4bb0cbe5f0..bb87111d5e16 100644 --- a/Documentation/netlink/specs/devlink.yaml +++ b/Documentation/netlink/specs/devlink.yaml @@ -853,18 +853,6 @@ attribute-sets: type: nest multi-attr: true nested-attributes: dl-rate-tc-bws - - - name: rate-tc-index - type: u8 - checks: - max: rate-tc-index-max - - - name: rate-tc-bw - type: u32 - doc: | - Specifies the bandwidth share assigned to the Traffic Class. - The bandwidth for the traffic class is determined - in proportion to the sum of the shares of all configured classes. - name: dl-dev-stats subset-of: devlink @@ -1271,12 +1259,20 @@ attribute-sets: type: flag - name: dl-rate-tc-bws - subset-of: devlink + name-prefix: devlink-rate-tc-attr- attributes: - - name: rate-tc-index + name: index + type: u8 + checks: + max: rate-tc-index-max - - name: rate-tc-bw + name: bw + type: u32 + doc: | + Specifies the bandwidth share assigned to the Traffic Class. + The bandwidth for the traffic class is determined + in proportion to the sum of the shares of all configured classes. operations: enum-model: directional diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h index e72bcc239afd..9fcb25a0f447 100644 --- a/include/uapi/linux/devlink.h +++ b/include/uapi/linux/devlink.h @@ -635,8 +635,6 @@ enum devlink_attr { DEVLINK_ATTR_REGION_DIRECT, /* flag */ DEVLINK_ATTR_RATE_TC_BWS, /* nested */ - DEVLINK_ATTR_RATE_TC_INDEX, /* u8 */ - DEVLINK_ATTR_RATE_TC_BW, /* u32 */ /* Add new attributes above here, update the spec in * Documentation/netlink/specs/devlink.yaml and re-generate @@ -647,6 +645,15 @@ enum devlink_attr { DEVLINK_ATTR_MAX = __DEVLINK_ATTR_MAX - 1 }; +enum devlink_rate_tc_attr { + DEVLINK_RATE_TC_ATTR_UNSPEC, + DEVLINK_RATE_TC_ATTR_INDEX, /* u8 */ + DEVLINK_RATE_TC_ATTR_BW, /* u32 */ + + __DEVLINK_RATE_TC_ATTR_MAX, + DEVLINK_RATE_TC_ATTR_MAX = __DEVLINK_RATE_TC_ATTR_MAX - 1 +}; + /* Mapping between internal resource described by the field and system * structure */ diff --git a/net/devlink/netlink_gen.c b/net/devlink/netlink_gen.c index c50436433c18..d97c326a9045 100644 --- a/net/devlink/netlink_gen.c +++ b/net/devlink/netlink_gen.c @@ -45,9 +45,9 @@ const struct nla_policy devlink_dl_port_function_nl_policy[DEVLINK_PORT_FN_ATTR_ [DEVLINK_PORT_FN_ATTR_CAPS] = NLA_POLICY_BITFIELD32(15), }; -const struct nla_policy devlink_dl_rate_tc_bws_nl_policy[DEVLINK_ATTR_RATE_TC_BW + 1] = { - [DEVLINK_ATTR_RATE_TC_INDEX] = NLA_POLICY_MAX(NLA_U8, DEVLINK_RATE_TC_INDEX_MAX), - [DEVLINK_ATTR_RATE_TC_BW] = { .type = NLA_U32, }, +const struct nla_policy devlink_dl_rate_tc_bws_nl_policy[DEVLINK_RATE_TC_ATTR_BW + 1] = { + [DEVLINK_RATE_TC_ATTR_INDEX] = NLA_POLICY_MAX(NLA_U8, DEVLINK_RATE_TC_INDEX_MAX), + [DEVLINK_RATE_TC_ATTR_BW] = { .type = NLA_U32, }, }; const struct nla_policy devlink_dl_selftest_id_nl_policy[DEVLINK_ATTR_SELFTEST_ID_FLASH + 1] = { diff --git a/net/devlink/netlink_gen.h b/net/devlink/netlink_gen.h index fb733b5d4ff1..09cc6f264ccf 100644 --- a/net/devlink/netlink_gen.h +++ b/net/devlink/netlink_gen.h @@ -13,7 +13,7 @@ /* Common nested types */ extern const struct nla_policy devlink_dl_port_function_nl_policy[DEVLINK_PORT_FN_ATTR_CAPS + 1]; -extern const struct nla_policy devlink_dl_rate_tc_bws_nl_policy[DEVLINK_ATTR_RATE_TC_BW + 1]; +extern const struct nla_policy devlink_dl_rate_tc_bws_nl_policy[DEVLINK_RATE_TC_ATTR_BW + 1]; extern const struct nla_policy devlink_dl_selftest_id_nl_policy[DEVLINK_ATTR_SELFTEST_ID_FLASH + 1]; /* Ops table for devlink */ diff --git a/net/devlink/rate.c b/net/devlink/rate.c index d39300a9b3d4..110b3fa8a0b1 100644 --- a/net/devlink/rate.c +++ b/net/devlink/rate.c @@ -90,8 +90,8 @@ static int devlink_rate_put_tc_bws(struct sk_buff *msg, u32 *tc_bw) if (!nla_tc_bw) return -EMSGSIZE; - if (nla_put_u8(msg, DEVLINK_ATTR_RATE_TC_INDEX, i) || - nla_put_u32(msg, DEVLINK_ATTR_RATE_TC_BW, tc_bw[i])) + if (nla_put_u8(msg, DEVLINK_RATE_TC_ATTR_INDEX, i) || + nla_put_u32(msg, DEVLINK_RATE_TC_ATTR_BW, tc_bw[i])) goto nla_put_failure; nla_nest_end(msg, nla_tc_bw); @@ -346,26 +346,26 @@ static int devlink_nl_rate_tc_bw_parse(struct nlattr *parent_nest, u32 *tc_bw, unsigned long *bitmap, struct netlink_ext_ack *extack) { - struct nlattr *tb[DEVLINK_ATTR_MAX + 1]; + struct nlattr *tb[DEVLINK_RATE_TC_ATTR_MAX + 1]; u8 tc_index; int err; - err = nla_parse_nested(tb, DEVLINK_ATTR_MAX, parent_nest, + err = nla_parse_nested(tb, DEVLINK_RATE_TC_ATTR_MAX, parent_nest, devlink_dl_rate_tc_bws_nl_policy, extack); if (err) return err; - if (!tb[DEVLINK_ATTR_RATE_TC_INDEX]) { + if (!tb[DEVLINK_RATE_TC_ATTR_INDEX]) { NL_SET_ERR_ATTR_MISS(extack, parent_nest, - DEVLINK_ATTR_RATE_TC_INDEX); + DEVLINK_RATE_TC_ATTR_INDEX); return -EINVAL; } - tc_index = nla_get_u8(tb[DEVLINK_ATTR_RATE_TC_INDEX]); + tc_index = nla_get_u8(tb[DEVLINK_RATE_TC_ATTR_INDEX]); - if (!tb[DEVLINK_ATTR_RATE_TC_BW]) { + if (!tb[DEVLINK_RATE_TC_ATTR_BW]) { NL_SET_ERR_ATTR_MISS(extack, parent_nest, - DEVLINK_ATTR_RATE_TC_BW); + DEVLINK_RATE_TC_ATTR_BW); return -EINVAL; } @@ -376,7 +376,7 @@ static int devlink_nl_rate_tc_bw_parse(struct nlattr *parent_nest, u32 *tc_bw, return -EINVAL; } - tc_bw[tc_index] = nla_get_u32(tb[DEVLINK_ATTR_RATE_TC_BW]); + tc_bw[tc_index] = nla_get_u32(tb[DEVLINK_RATE_TC_ATTR_BW]); return 0; } diff --git a/tools/testing/selftests/drivers/net/hw/devlink_rate_tc_bw.py b/tools/testing/selftests/drivers/net/hw/devlink_rate_tc_bw.py index 820d8a03becc..835c357919a8 100755 --- a/tools/testing/selftests/drivers/net/hw/devlink_rate_tc_bw.py +++ b/tools/testing/selftests/drivers/net/hw/devlink_rate_tc_bw.py @@ -208,14 +208,14 @@ def setup_devlink_rate(cfg): "port-index": port_index, "rate-tx-max": 125000000, "rate-tc-bws": [ - {"rate-tc-index": 0, "rate-tc-bw": 0}, - {"rate-tc-index": 1, "rate-tc-bw": 0}, - {"rate-tc-index": 2, "rate-tc-bw": 0}, - {"rate-tc-index": 3, "rate-tc-bw": 20}, - {"rate-tc-index": 4, "rate-tc-bw": 80}, - {"rate-tc-index": 5, "rate-tc-bw": 0}, - {"rate-tc-index": 6, "rate-tc-bw": 0}, - {"rate-tc-index": 7, "rate-tc-bw": 0}, + {"index": 0, "bw": 0}, + {"index": 1, "bw": 0}, + {"index": 2, "bw": 0}, + {"index": 3, "bw": 20}, + {"index": 4, "bw": 80}, + {"index": 5, "bw": 0}, + {"index": 6, "bw": 0}, + {"index": 7, "bw": 0}, ] }) except NlError as exc: base-commit: 3fc894728fb3a0d9282e81247b68c07468fe2985 -- 2.31.1

1 month, 3 weeks

4
3
0 0

[PATCH net v2] selftests: drv-net: wait for iperf client to stop sending

by Nimrod Oren

A few packets may still be sent out during the termination of iperf processes. These late packets cause failures in rss_ctx.py when they arrive on queues expected to be empty. Example failure observed: Check failed 2 != 0 traffic on inactive queues (context 1): [0, 0, 1, 1, 386385, 397196, 0, 0, 0, 0, ...] Check failed 4 != 0 traffic on inactive queues (context 2): [0, 0, 0, 0, 2, 2, 247152, 253013, 0, 0, ...] Check failed 2 != 0 traffic on inactive queues (context 3): [0, 0, 0, 0, 0, 0, 1, 1, 282434, 283070, ...] To avoid such failures, wait until all client sockets for the requested port are either closed or in the TIME_WAIT state. Fixes: 847aa551fa78 ("selftests: drv-net: rss_ctx: factor out send traffic and check") Signed-off-by: Nimrod Oren <noren(a)nvidia.com> Reviewed-by: Gal Pressman <gal(a)nvidia.com> Reviewed-by: Carolina Jubran <cjubran(a)nvidia.com> --- Changelog: v2: - Replace fixed sleep with logic that waits for client sockets to close. - Update commit title and message to reflect new approach. v1: https://lore.kernel.org/all/20250629111812.644282-1-noren@nvidia.com/ --- .../selftests/drivers/net/lib/py/load.py | 23 +++++++++++++++---- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/drivers/net/lib/py/load.py b/tools/testing/selftests/drivers/net/lib/py/load.py index d9c10613ae67..44151b7b1a24 100644 --- a/tools/testing/selftests/drivers/net/lib/py/load.py +++ b/tools/testing/selftests/drivers/net/lib/py/load.py @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 +import re import time from lib.py import ksft_pr, cmd, ip, rand_port, wait_port_listen @@ -10,12 +11,11 @@ class GenerateTraffic: self.env = env - if port is None: - port = rand_port() - self._iperf_server = cmd(f"iperf3 -s -1 -p {port}", background=True) - wait_port_listen(port) + self.port = rand_port() if port is None else port + self._iperf_server = cmd(f"iperf3 -s -1 -p {self.port}", background=True) + wait_port_listen(self.port) time.sleep(0.1) - self._iperf_client = cmd(f"iperf3 -c {env.addr} -P 16 -p {port} -t 86400", + self._iperf_client = cmd(f"iperf3 -c {env.addr} -P 16 -p {self.port} -t 86400", background=True, host=env.remote) # Wait for traffic to ramp up @@ -56,3 +56,16 @@ class GenerateTraffic: ksft_pr(">> Server:") ksft_pr(self._iperf_server.stdout) ksft_pr(self._iperf_server.stderr) + self._wait_client_stopped() + + def _wait_client_stopped(self, sleep=0.005, timeout=5): + end = time.monotonic() + timeout + + live_port_pattern = re.compile(fr":{self.port:04X} 0[^6] ") + + while time.monotonic() < end: + data = cmd("cat /proc/net/tcp*", host=self.env.remote).stdout + if not live_port_pattern.search(data): + return + time.sleep(sleep) + raise Exception(f"Waiting for client to stop timed out after {timeout}s") -- 2.40.1

1 month, 3 weeks

3
2
0 0

[PATCH net-next v3 4/4] selftests: drv-net: add test for RSS on flow label

by Jakub Kicinski

Add a simple test for checking that RSS on flow label works, and that its rejected for IPv4 flows. # ./tools/testing/selftests/drivers/net/hw/rss_flow_label.py TAP version 13 1..2 ok 1 rss_flow_label.test_rss_flow_label ok 2 rss_flow_label.test_rss_flow_label_6only # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0 Reviewed-by: Willem de Bruijn <willemb(a)google.com> Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- v2: - check for RPS / RFS v1: https://lore.kernel.org/20250722014915.3365370-5-kuba@kernel.org CC: shuah(a)kernel.org CC: sdf(a)fomichev.me CC: linux-kselftest(a)vger.kernel.org --- .../testing/selftests/drivers/net/hw/Makefile | 1 + .../drivers/net/hw/rss_flow_label.py | 167 ++++++++++++++++++ 2 files changed, 168 insertions(+) create mode 100755 tools/testing/selftests/drivers/net/hw/rss_flow_label.py diff --git a/tools/testing/selftests/drivers/net/hw/Makefile b/tools/testing/selftests/drivers/net/hw/Makefile index fdc97355588c..5159fd34cb33 100644 --- a/tools/testing/selftests/drivers/net/hw/Makefile +++ b/tools/testing/selftests/drivers/net/hw/Makefile @@ -18,6 +18,7 @@ TEST_PROGS = \ pp_alloc_fail.py \ rss_api.py \ rss_ctx.py \ + rss_flow_label.py \ rss_input_xfrm.py \ tso.py \ xsk_reconfig.py \ diff --git a/tools/testing/selftests/drivers/net/hw/rss_flow_label.py b/tools/testing/selftests/drivers/net/hw/rss_flow_label.py new file mode 100755 index 000000000000..6fa95fe27c47 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/rss_flow_label.py @@ -0,0 +1,167 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +""" +Tests for RSS hashing on IPv6 Flow Label. +""" + +import glob +import os +import socket +from lib.py import CmdExitFailure +from lib.py import ksft_run, ksft_exit, ksft_eq, ksft_ge, ksft_in, \ + ksft_not_in, ksft_raises, KsftSkipEx +from lib.py import bkg, cmd, defer, fd_read_timeout, rand_port +from lib.py import NetDrvEpEnv + + +def _check_system(cfg): + if not hasattr(socket, "SO_INCOMING_CPU"): + raise KsftSkipEx("socket.SO_INCOMING_CPU was added in Python 3.11") + + qcnt = len(glob.glob(f"/sys/class/net/{cfg.ifname}/queues/rx-*")) + if qcnt < 2: + raise KsftSkipEx(f"Local has only {qcnt} queues") + + for f in [f"/sys/class/net/{cfg.ifname}/queues/rx-0/rps_flow_cnt", + f"/sys/class/net/{cfg.ifname}/queues/rx-0/rps_cpus"]: + try: + with open(f, 'r') as fp: + setting = fp.read().strip() + # CPU mask will be zeros and commas + if setting.replace("0", "").replace(",", ""): + raise KsftSkipEx(f"RPS/RFS is configured: {f}: {setting}") + except FileNotFoundError: + pass + + # 1 is the default, if someone changed it we probably shouldn"t mess with it + af = cmd("cat /proc/sys/net/ipv6/auto_flowlabels", host=cfg.remote).stdout + if af.strip() != "1": + raise KsftSkipEx("Remote does not have auto_flowlabels enabled") + + +def _ethtool_get_cfg(cfg, fl_type): + descr = cmd(f"ethtool -n {cfg.ifname} rx-flow-hash {fl_type}").stdout + + converter = { + "IP SA": "s", + "IP DA": "d", + "L3 proto": "t", + "L4 bytes 0 & 1 [TCP/UDP src port]": "f", + "L4 bytes 2 & 3 [TCP/UDP dst port]": "n", + "IPv6 Flow Label": "l", + } + + ret = "" + for line in descr.split("\n")[1:-2]: + # if this raises we probably need to add more keys to converter above + ret += converter[line] + return ret + + +def _traffic(cfg, one_sock, one_cpu): + local_port = rand_port(socket.SOCK_DGRAM) + remote_port = rand_port(socket.SOCK_DGRAM) + + sock = socket.socket(socket.AF_INET6, socket.SOCK_DGRAM) + sock.bind(("", local_port)) + sock.connect((cfg.remote_addr_v["6"], 0)) + if one_sock: + send = f"exec 5<>/dev/udp/{cfg.addr_v['6']}/{local_port}; " \ + "for i in `seq 20`; do echo a >&5; sleep 0.02; done; exec 5>&-" + else: + send = "for i in `seq 20`; do echo a | socat -t0.02 - UDP6:" \ + f"[{cfg.addr_v['6']}]:{local_port},sourceport={remote_port}; done" + + cpus = set() + with bkg(send, shell=True, host=cfg.remote, exit_wait=True): + for _ in range(20): + fd_read_timeout(sock.fileno(), 1) + cpu = sock.getsockopt(socket.SOL_SOCKET, socket.SO_INCOMING_CPU) + cpus.add(cpu) + + if one_cpu: + ksft_eq(len(cpus), 1, + f"{one_sock=} - expected one CPU, got traffic on: {cpus=}") + else: + ksft_ge(len(cpus), 2, + f"{one_sock=} - expected many CPUs, got traffic on: {cpus=}") + + +def test_rss_flow_label(cfg): + """ + Test hashing on IPv6 flow label. Send traffic over a single socket + and over multiple sockets. Depend on the remote having auto-label + enabled so that it randomizes the label per socket. + """ + + cfg.require_ipver("6") + cfg.require_cmd("socat", remote=True) + _check_system(cfg) + + # Enable flow label hashing for UDP6 + initial = _ethtool_get_cfg(cfg, "udp6") + no_lbl = initial.replace("l", "") + if "l" not in initial: + try: + cmd(f"ethtool -N {cfg.ifname} rx-flow-hash udp6 l{no_lbl}") + except CmdExitFailure as exc: + raise KsftSkipEx("Device doesn't support Flow Label for UDP6") from exc + + defer(cmd, f"ethtool -N {cfg.ifname} rx-flow-hash udp6 {initial}") + + _traffic(cfg, one_sock=True, one_cpu=True) + _traffic(cfg, one_sock=False, one_cpu=False) + + # Disable it, we should see no hashing (reset was already defer()ed) + cmd(f"ethtool -N {cfg.ifname} rx-flow-hash udp6 {no_lbl}") + + _traffic(cfg, one_sock=False, one_cpu=True) + + +def _check_v4_flow_types(cfg): + for fl_type in ["tcp4", "udp4", "ah4", "esp4", "sctp4"]: + try: + cur = cmd(f"ethtool -n {cfg.ifname} rx-flow-hash {fl_type}").stdout + ksft_not_in("Flow Label", cur, + comment=f"{fl_type=} has Flow Label:" + cur) + except CmdExitFailure: + # Probably does not support this flow type + pass + + +def test_rss_flow_label_6only(cfg): + """ + Test interactions with IPv4 flow types. It should not be possible to set + IPv6 Flow Label hashing for an IPv4 flow type. The Flow Label should also + not appear in the IPv4 "current config". + """ + + with ksft_raises(CmdExitFailure) as cm: + cmd(f"ethtool -N {cfg.ifname} rx-flow-hash tcp4 sdfnl") + ksft_in("Invalid argument", cm.exception.cmd.stderr) + + _check_v4_flow_types(cfg) + + # Try to enable Flow Labels and check again, in case it leaks thru + initial = _ethtool_get_cfg(cfg, "udp6") + changed = initial.replace("l", "") if "l" in initial else initial + "l" + + cmd(f"ethtool -N {cfg.ifname} rx-flow-hash udp6 {changed}") + restore = defer(cmd, f"ethtool -N {cfg.ifname} rx-flow-hash udp6 {initial}") + + _check_v4_flow_types(cfg) + restore.exec() + _check_v4_flow_types(cfg) + + +def main() -> None: + with NetDrvEpEnv(__file__, nsim_test=False) as cfg: + ksft_run([test_rss_flow_label, + test_rss_flow_label_6only], + args=(cfg, )) + ksft_exit() + + +if __name__ == "__main__": + main() -- 2.50.1

1 month, 3 weeks

1
0
0 0

[PATCH RFC 0/4] procfs: make reference pidns more user-visible

by Aleksa Sarai

Ever since the introduction of pid namespaces, procfs has had very implicit behaviour surrounding them (the pidns used by a procfs mount is auto-selected based on the mounting process's active pidns, and the pidns itself is basically hidden once the mount has been constructed). This has historically meant that userspace was required to do some special dances in order to configure the pidns of a procfs mount as desired. Examples include: * In order to bypass the mnt_too_revealing() check, Kubernetes creates a procfs mount from an empty pidns so that user namespaced containers can be nested (without this, the nested containers would fail to mount procfs). But this requires forking off a helper process because you cannot just one-shot this using mount(2). * Container runtimes in general need to fork into a container before configuring its mounts, which can lead to security issues in the case of shared-pidns containers (a privileged process in the pidns can interact with your container runtime process). While SUID_DUMP_DISABLE and user namespaces make this less of an issue, the strict need for this due to a minor uAPI wart is kind of unfortunate. Things would be much easier if there was a way for userspace to just specify the pidns they want. Patch 1 implements a new "pidns" argument which can be set using fsconfig(2): fsconfig(procfd, FSCONFIG_SET_FD, "pidns", NULL, nsfd); fsconfig(procfd, FSCONFIG_SET_STRING, "pidns", "/proc/self/ns/pid", 0); or classic mount(2) / mount(8): // mount -t proc -o pidns=/proc/self/ns/pid proc /tmp/proc mount("proc", "/tmp/proc", "proc", MS_..., "pidns=/proc/self/ns/pid"); The initial security model I have in this RFC is to be as conservative as possible and just mirror the security model for setns(2) -- which means that you can only set pidns=... to pid namespaces that your current pid namespace is a direct ancestor of. This fulfils the requirements of container runtimes, but I suspect that this may be too strict for some usecases. The pidns argument is not displayed in mountinfo -- it's not clear to me what value it would make sense to show (maybe we could just use ns_dname to provide an identifier for the namespace, but this number would be fairly useless to userspace). I'm open to suggestions. In addition, being able to figure out what pid namespace is being used by a procfs mount is quite useful when you have an administrative process (such as a container runtime) which wants to figure out the correct way of mapping PIDs between its own namespace and the namespace for procfs (using NS_GET_{PID,TGID}_{IN,FROM}_PIDNS). There are alternative ways to do this, but they all rely on ancillary information that third-party libraries and tools do not necessarily have access to. To make this easier, add a new ioctl (PROCFS_GET_PID_NAMESPACE) which can be used to get a reference to the pidns that a procfs is using. It's not quite clear what is the correct security model for this API, but the current approach I've taken is to: * Make the ioctl only valid on the root (meaning that a process without access to the procfs root -- such as only having an fd to a procfs file or some open_tree(2)-like subset -- cannot use this API). * Require that the process requesting either has access to /proc/1/ns/pid anyway (i.e. has ptrace-read access to the pidns pid1), has CAP_SYS_ADMIN access to the pidns (i.e. has administrative access to it and can join it if they had a handle), or is in a pidns that is a direct ancestor of the target pidns (i.e. all of the pids are already visible in the procfs for the current process's pidns). The security model for this is a little loose, as it seems to me that all of the cases mentioned are valid cases to allow access, but I'm open to suggestions for whether we need to make this stricter or looser. Signed-off-by: Aleksa Sarai <cyphar(a)cyphar.com> --- Aleksa Sarai (4): pidns: move is-ancestor logic to helper procfs: add pidns= mount option procfs: add PROCFS_GET_PID_NAMESPACE ioctl selftests/proc: add tests for new pidns APIs Documentation/filesystems/proc.rst | 10 ++ fs/proc/root.c | 132 +++++++++++++- include/linux/pid_namespace.h | 9 + include/uapi/linux/fs.h | 3 + kernel/pid_namespace.c | 21 ++- tools/testing/selftests/proc/.gitignore | 1 + tools/testing/selftests/proc/Makefile | 1 + tools/testing/selftests/proc/proc-pidns.c | 286 ++++++++++++++++++++++++++++++ 8 files changed, 448 insertions(+), 15 deletions(-) --- base-commit: 4c838c7672c39ec6ec48456c6ce22d14a68f4cda change-id: 20250717-procfs-pidns-api-8ed1583431f0 Best regards, -- Aleksa Sarai <cyphar(a)cyphar.com>

1 month, 3 weeks

2
7
0 0

[PATCH v2 0/5] KVM: Improve VMware guest support

by Zack Rusin

This is the second version of a series that lets us run VMware Workstation on Linux on top of KVM. The most significant change in this series is the introduction of CONFIG_KVM_VMWARE which is, in general, a nice cleanup for various bits of VMware compatibility code that have been scattered around KVM. (first patch) The rest of the series builds upon the VMware platform to implement features that are needed to run VMware guests without any modifications on top of KVM: - ability to turn on the VMware backdoor at runtime on a per-vm basis (used to be a kernel boot argument only) - support for VMware hypercalls - VMware products have a huge collection of hypercalls, all of which are handled in userspace, - support for handling legacy VMware backdoor in L0 in nested configs - in cases where we have WS running a Windows VBS guest, the L0 would be KVM, L1 Hyper-V so by default VMware Tools backdoor calls endup in Hyper-V which can not handle them, so introduce a cap to let L0 handle those. The final change in the series is a kselftest of the VMware hypercall functionality. Cc: Paolo Bonzini <pbonzini(a)redhat.com> Cc: Jonathan Corbet <corbet(a)lwn.net> Cc: Sean Christopherson <seanjc(a)google.com> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Ingo Molnar <mingo(a)redhat.com> Cc: Borislav Petkov <bp(a)alien8.de> Cc: Dave Hansen <dave.hansen(a)linux.intel.com> Cc: x86(a)kernel.org Cc: "H. Peter Anvin" <hpa(a)zytor.com> Cc: Zack Rusin <zack.rusin(a)broadcom.com> Cc: Doug Covelli <doug.covelli(a)broadcom.com> Cc: Shuah Khan <shuah(a)kernel.org> Cc: Namhyung Kim <namhyung(a)kernel.org> Cc: Arnaldo Carvalho de Melo <acme(a)redhat.com> Cc: Michael Ellerman <mpe(a)ellerman.id.au> Cc: Joel Stanley <joel(a)jms.id.au> Cc: Isaku Yamahata <isaku.yamahata(a)intel.com> Cc: kvm(a)vger.kernel.org Cc: linux-doc(a)vger.kernel.org Cc: linux-kernel(a)vger.kernel.org Cc: linux-kselftest(a)vger.kernel.org Zack Rusin (5): KVM: x86: Centralize KVM's VMware code KVM: x86: Allow enabling of the vmware backdoor via a cap KVM: x86: Add support for VMware guest specific hypercalls KVM: x86: Add support for legacy VMware backdoors in nested setups KVM: selftests: x86: Add a test for KVM_CAP_X86_VMWARE_HYPERCALL Documentation/virt/kvm/api.rst | 86 +++++++- MAINTAINERS | 9 + arch/x86/include/asm/kvm_host.h | 13 ++ arch/x86/kvm/Kconfig | 16 ++ arch/x86/kvm/Makefile | 1 + arch/x86/kvm/emulate.c | 11 +- arch/x86/kvm/kvm_vmware.c | 85 ++++++++ arch/x86/kvm/kvm_vmware.h | 189 ++++++++++++++++++ arch/x86/kvm/pmu.c | 39 +--- arch/x86/kvm/pmu.h | 4 - arch/x86/kvm/svm/nested.c | 6 + arch/x86/kvm/svm/svm.c | 10 +- arch/x86/kvm/vmx/nested.c | 6 + arch/x86/kvm/vmx/vmx.c | 5 +- arch/x86/kvm/x86.c | 74 +++---- arch/x86/kvm/x86.h | 2 - include/uapi/linux/kvm.h | 27 +++ tools/include/uapi/linux/kvm.h | 3 + tools/testing/selftests/kvm/Makefile.kvm | 1 + .../selftests/kvm/x86/vmware_hypercall_test.c | 121 +++++++++++ 20 files changed, 614 insertions(+), 94 deletions(-) create mode 100644 arch/x86/kvm/kvm_vmware.c create mode 100644 arch/x86/kvm/kvm_vmware.h create mode 100644 tools/testing/selftests/kvm/x86/vmware_hypercall_test.c -- 2.48.1

1 month, 3 weeks

2
2
0 0

[PATCH v2] rtc: Rename lib_test to test_rtc_lib

by Geert Uytterhoeven

When compiling the RTC library functions test as a module, the module has the non-descriptive name "lib_test.ko". Fix this by renaming it to "test_rtc_lib.ko". Signed-off-by: Geert Uytterhoeven <geert(a)linux-m68k.org> --- v2: - s/rtc_lib_test/test_rtc_lib/. --- drivers/rtc/Makefile | 2 +- drivers/rtc/{lib_test.c => test_rtc_lib.c} | 0 2 files changed, 1 insertion(+), 1 deletion(-) rename drivers/rtc/{lib_test.c => test_rtc_lib.c} (100%) diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 4619aa2ac4697591..789bddfea99d8fcd 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -15,7 +15,7 @@ rtc-core-$(CONFIG_RTC_INTF_DEV) += dev.o rtc-core-$(CONFIG_RTC_INTF_PROC) += proc.o rtc-core-$(CONFIG_RTC_INTF_SYSFS) += sysfs.o -obj-$(CONFIG_RTC_LIB_KUNIT_TEST) += lib_test.o +obj-$(CONFIG_RTC_LIB_KUNIT_TEST) += test_rtc_lib.o # Keep the list ordered. diff --git a/drivers/rtc/lib_test.c b/drivers/rtc/test_rtc_lib.c similarity index 100% rename from drivers/rtc/lib_test.c rename to drivers/rtc/test_rtc_lib.c -- 2.43.0

1 month, 3 weeks

2
1
0 0

[PATCH][next] tools/testing/selftests: Fix spelling mistake "unnmap" -> "unmap"

by Colin Ian King

There is a spelling mistake in ksft_test_result_fail messages. Fix them. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- tools/testing/selftests/mm/mremap_test.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/mm/mremap_test.c b/tools/testing/selftests/mm/mremap_test.c index fccf9e797a0c..774cdba102fc 100644 --- a/tools/testing/selftests/mm/mremap_test.c +++ b/tools/testing/selftests/mm/mremap_test.c @@ -525,10 +525,10 @@ static void mremap_move_multiple_vmas(unsigned int pattern_seed, out: if (success) ksft_test_result_pass("%s%s\n", test_name, - dont_unmap ? " [dontunnmap]" : ""); + dont_unmap ? " [dontunmap]" : ""); else ksft_test_result_fail("%s%s\n", test_name, - dont_unmap ? " [dontunnmap]" : ""); + dont_unmap ? " [dontunmap]" : ""); } static void mremap_shrink_multiple_vmas(unsigned long page_size, @@ -727,10 +727,10 @@ static void mremap_move_multiple_vmas_split(unsigned int pattern_seed, out: if (success) ksft_test_result_pass("%s%s\n", test_name, - dont_unmap ? " [dontunnmap]" : ""); + dont_unmap ? " [dontunmap]" : ""); else ksft_test_result_fail("%s%s\n", test_name, - dont_unmap ? " [dontunnmap]" : ""); + dont_unmap ? " [dontunmap]" : ""); } /* Returns the time taken for the remap on success else returns -1. */ -- 2.50.0

1 month, 3 weeks

5
4
0 0

[PATCH/RFC] kunit/rtc: Add real support for very slow tests

by Geert Uytterhoeven

When running rtc_lib_test ("lib_test" before my "[PATCH] rtc: Rename lib_test to rtc_lib_test") on m68k/ARAnyM: KTAP version 1 1..1 KTAP version 1 # Subtest: rtc_lib_test_cases # module: rtc_lib_test 1..2 # rtc_time64_to_tm_test_date_range_1000: Test should be marked slow (runtime: 3.222371420s) ok 1 rtc_time64_to_tm_test_date_range_1000 # rtc_time64_to_tm_test_date_range_160000: try timed out # rtc_time64_to_tm_test_date_range_160000: test case timed out # rtc_time64_to_tm_test_date_range_160000.speed: slow not ok 2 rtc_time64_to_tm_test_date_range_160000 # rtc_lib_test_cases: pass:1 fail:1 skip:0 total:2 # Totals: pass:1 fail:1 skip:0 total:2 not ok 1 rtc_lib_test_cases Commit 02c2d0c2a84172c3 ("kunit: Add speed attribute") added the notion of "very slow" tests, but this is further unused and unhandled. Hence: 1. Introduce KUNIT_CASE_VERY_SLOW(), 2. Increase timeout by ten; ideally this should only be done for very slow tests, but I couldn't find how to access kunit_case.attr.case from kunit_try_catch_run(), 3. Mark rtc_time64_to_tm_test_date_range_1000 slow, 4. Mark rtc_time64_to_tm_test_date_range_160000 very slow. Afterwards: KTAP version 1 1..1 KTAP version 1 # Subtest: rtc_lib_test_cases # module: rtc_lib_test 1..2 # rtc_time64_to_tm_test_date_range_1000.speed: slow ok 1 rtc_time64_to_tm_test_date_range_1000 # rtc_time64_to_tm_test_date_range_160000.speed: very_slow ok 2 rtc_time64_to_tm_test_date_range_160000 # rtc_lib_test_cases: pass:2 fail:0 skip:0 total:2 # Totals: pass:2 fail:0 skip:0 total:2 ok 1 rtc_lib_test_cases Signed-off-by: Geert Uytterhoeven <geert(a)linux-m68k.org> --- drivers/rtc/rtc_lib_test.c | 4 ++-- include/kunit/test.h | 11 +++++++++++ lib/kunit/try-catch.c | 3 ++- 3 files changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/rtc/rtc_lib_test.c b/drivers/rtc/rtc_lib_test.c index c30c759662e39b48..fd3210e39d37dbc6 100644 --- a/drivers/rtc/rtc_lib_test.c +++ b/drivers/rtc/rtc_lib_test.c @@ -85,8 +85,8 @@ static void rtc_time64_to_tm_test_date_range_1000(struct kunit *test) } static struct kunit_case rtc_lib_test_cases[] = { - KUNIT_CASE(rtc_time64_to_tm_test_date_range_1000), - KUNIT_CASE_SLOW(rtc_time64_to_tm_test_date_range_160000), + KUNIT_CASE_SLOW(rtc_time64_to_tm_test_date_range_1000), + KUNIT_CASE_VERY_SLOW(rtc_time64_to_tm_test_date_range_160000), {} }; diff --git a/include/kunit/test.h b/include/kunit/test.h index 9b773406e01f3c43..4e3c1cae5b41466e 100644 --- a/include/kunit/test.h +++ b/include/kunit/test.h @@ -183,6 +183,17 @@ static inline char *kunit_status_to_ok_not_ok(enum kunit_status status) { .run_case = test_name, .name = #test_name, \ .attr.speed = KUNIT_SPEED_SLOW, .module_name = KBUILD_MODNAME} +/** + * KUNIT_CASE_VERY_SLOW - A helper for creating a &struct kunit_case + * with the very slow attribute + * + * @test_name: a reference to a test case function. + */ + +#define KUNIT_CASE_VERY_SLOW(test_name) \ + { .run_case = test_name, .name = #test_name, \ + .attr.speed = KUNIT_SPEED_VERY_SLOW, .module_name = KBUILD_MODNAME} + /** * KUNIT_CASE_PARAM - A helper for creation a parameterized &struct kunit_case * diff --git a/lib/kunit/try-catch.c b/lib/kunit/try-catch.c index 6bbe0025b0790bd2..92099c67bb21d0a4 100644 --- a/lib/kunit/try-catch.c +++ b/lib/kunit/try-catch.c @@ -56,7 +56,8 @@ static unsigned long kunit_test_timeout(void) * If tests timeout due to exceeding sysctl_hung_task_timeout_secs, * the task will be killed and an oops generated. */ - return 300 * msecs_to_jiffies(MSEC_PER_SEC); /* 5 min */ + // FIXME times ten for KUNIT_SPEED_VERY_SLOW? + return 10 * 300 * msecs_to_jiffies(MSEC_PER_SEC); /* 5 min */ } void kunit_try_catch_run(struct kunit_try_catch *try_catch, void *context) -- 2.43.0

1 month, 3 weeks

3
3
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror