- Linux-kselftest-mirror - lists.linaro.org

[PATCH net-next v2 0/7] net/selftests: TCP-AO selftests updates

by Dmitry Safonov via B4 Relay

First 4 patches are more-or-less cleanups/preparations. Patch 5 was sent to me/contributed off-list by Mohammad, who wants 32-bit kernels to run TCP-AO. Patch 6 is a workaround/fix for slow VMs. Albeit, I can't reproduce the issue, but I hope it will fix netdev flakes for connect-deny-* tests. And the biggest change is adding TCP-AO tracepoints to selftests. I think it's a good addition by the following reasons: - The related tracepoints are now tested; - It allows tcp-ao selftests to raise expectations on the kernel behavior - up from the syscalls exit statuses + net counters. - Provides tracepoints usage samples. As tracepoints are not a stable ABI, any kernel changes done to them will be reflected to the selftests, which also will allow users to see how to change their code. It's quite better than parsing dmesg (what BGP was doing pre-tracepoints, ugh). Somewhat arguably, the code parses trace_pipe, rather than uses libtraceevent (which any sane user should do). The reason behind that is the same as for rt-netlink macros instead of libmnl: I'm trying to minimize the library dependencies of the selftests. And the performance of formatting text in kernel and parsing it again in a test is not critical. Current output sample: > ok 73 Trace events matched expectations: 13 tcp_hash_md5_required[2] tcp_hash_md5_unexpected[4] tcp_hash_ao_required[3] tcp_ao_key_not_found[4] Previously, tracepoints selftests were part of kernel tcp tracepoints submission [1], but since then the code was quite changed: - Now generic tracing setup is in lib/ftrace.c, separate from lib/ftrace-tcp.c which utilizes TCP trace points. This separation allows future selftests to trace non-TCP events, i.e. to find out an skb's drop reason, which was useful in the creation of TCP-CLOSE stress-test (not in this patch set, but used in attempt to reproduce the issue from [2]). - Another change is that in the previous submission the trace events where used only to detect unexpected TCP-AO/TCP-MD5 events. In this version the selftests will fail if an expected trace event didn't appear. Let's see how reliable this is on the netdev bot - it obviously passes on my testing, but potentially may require a temporary XFAIL patch if it misbehaves on a slow VM. [1] https://lore.kernel.org/lkml/20240224-tcp-ao-tracepoints-v1-0-15f31b7f30a7@… [2] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=3… Signed-off-by: Dmitry Safonov <0x7f454c46(a)gmail.com> --- Changes in v2: - Fixed two issues with parsing TCP-AO events: the socket state and TCP segment flags. Hopefully, won't fail on netdev. - Reword patch 1 & 2 messages to be more informative and at some degree formal (Paolo) - Since commit e33a02ed6a4f ("selftests: Add printf attribute to kselftest prints") it's possible to use __printf instead of "raw" gcc attribute - switch using that, as checkpatch suggests. - Link to v1: https://lore.kernel.org/r/20240730-tcp-ao-selftests-upd-6-12-v1-0-ffd4bf15d… --- Dmitry Safonov (6): selftests/net: Clean-up double assignment selftests/net: Provide test_snprintf() helper selftests/net: Be consistent in kconfig checks selftests/net: Don't forget to close nsfd after switch_save_ns() selftests/net: Synchronize client/server before counters checks selftests/net: Add trace events matching to tcp_ao Mohammad Nassiri (1): selftests/tcp_ao: Fix printing format for uint64_t tools/testing/selftests/net/tcp_ao/Makefile | 3 +- tools/testing/selftests/net/tcp_ao/bench-lookups.c | 2 +- tools/testing/selftests/net/tcp_ao/config | 1 + tools/testing/selftests/net/tcp_ao/connect-deny.c | 25 +- tools/testing/selftests/net/tcp_ao/connect.c | 6 +- tools/testing/selftests/net/tcp_ao/icmps-discard.c | 2 +- .../testing/selftests/net/tcp_ao/key-management.c | 18 +- tools/testing/selftests/net/tcp_ao/lib/aolib.h | 176 ++++++- .../testing/selftests/net/tcp_ao/lib/ftrace-tcp.c | 549 +++++++++++++++++++++ tools/testing/selftests/net/tcp_ao/lib/ftrace.c | 466 +++++++++++++++++ tools/testing/selftests/net/tcp_ao/lib/kconfig.c | 31 +- tools/testing/selftests/net/tcp_ao/lib/setup.c | 15 +- tools/testing/selftests/net/tcp_ao/lib/sock.c | 1 - tools/testing/selftests/net/tcp_ao/lib/utils.c | 26 + tools/testing/selftests/net/tcp_ao/restore.c | 30 +- tools/testing/selftests/net/tcp_ao/rst.c | 2 +- tools/testing/selftests/net/tcp_ao/self-connect.c | 19 +- tools/testing/selftests/net/tcp_ao/seq-ext.c | 28 +- .../selftests/net/tcp_ao/setsockopt-closed.c | 6 +- tools/testing/selftests/net/tcp_ao/unsigned-md5.c | 35 +- 20 files changed, 1375 insertions(+), 66 deletions(-) --- base-commit: 3361a6eae59664ffae640ff7a838f5bd89c24461 change-id: 20240730-tcp-ao-selftests-upd-6-12-4d3e53a74f3f Best regards, -- Dmitry Safonov <0x7f454c46(a)gmail.com>

1 year, 3 months

4
12
0 0

[PATCH v7] mm, memcg: cg2 memory{.swap,}.peak write handlers

by David Finkel

This revision only updates the tests from the previous revision[1], and integrates an Acked-by[2] and a Reviewed-By[3] into the first commit message. Documentation/admin-guide/cgroup-v2.rst | 22 ++- include/linux/cgroup-defs.h | 5 + include/linux/cgroup.h | 3 + include/linux/memcontrol.h | 5 + include/linux/page_counter.h | 11 +- kernel/cgroup/cgroup-internal.h | 2 + kernel/cgroup/cgroup.c | 7 + mm/memcontrol.c | 116 +++++++++++++-- mm/page_counter.c | 30 +++- tools/testing/selftests/cgroup/cgroup_util.c | 22 +++ tools/testing/selftests/cgroup/cgroup_util.h | 2 + tools/testing/selftests/cgroup/test_memcontrol.c | 264 ++++++++++++++++++++++++++++++++- 12 files changed, 454 insertions(+), 35 deletions(-) [1]: https://lore.kernel.org/cgroups/20240729143743.34236-1-davidf@vimeo.com/T/ [2]: https://lore.kernel.org/cgroups/20240729143743.34236-1-davidf@vimeo.com/T/#… [3]: https://lore.kernel.org/cgroups/20240729143743.34236-1-davidf@vimeo.com/T/#… Thank you all for the support and reviews so far! David Finkel Senior Principal Software Engineer Vimeo Inc.

1 year, 3 months

4
9
0 0

[PATCH v2 0/2] selftests: harness: refactor __constructor_order

by Masahiro Yamada

This series refactors __constructor_order because __constructor_order_last() is unneeded. No code change since v1. I reworded "reverse-order" to "backward-order" in commit description. Masahiro Yamada (2): selftests: harness: remove unneeded __constructor_order_last() selftests: harness: rename __constructor_order for clarification .../drivers/s390x/uvdevice/test_uvdevice.c | 6 ------ tools/testing/selftests/hid/hid_bpf.c | 6 ------ tools/testing/selftests/kselftest_harness.h | 18 ++++-------------- tools/testing/selftests/rtc/rtctest.c | 7 ------- 4 files changed, 4 insertions(+), 33 deletions(-) -- 2.43.0

1 year, 3 months

3
4
0 0

[PATCH v3] lib: Convert test_user_copy to KUnit test

by Vitor Massaru Iha

This adds the conversion of the runtime tests of test_user_copy fuctions, from `lib/test_user_copy.c`to KUnit tests. Signed-off-by: Vitor Massaru Iha <vitor(a)massaru.org> --- v2: * splitted patch in 3: - Allows to install and load modules in root filesystem; - Provides an userspace memory context when tests are compiled as module; - Convert test_user_copy to KUnit test; * removed entry for CONFIG_TEST_USER_COPY; * replaced pr_warn to KUNIT_EXPECT_FALSE_MSG in test macro to decrease the diff; v3: * rebased with last kunit branch * Please apply this commit from kunit-fixes: 3f37d14b8a3152441f36b6bc74000996679f0998 And these from patchwork: https://patchwork.kernel.org/patch/11676331/ https://patchwork.kernel.org/patch/11676335/ --- lib/Kconfig.debug | 28 ++++++++------ lib/Makefile | 2 +- lib/{test_user_copy.c => user_copy_kunit.c} | 42 +++++++++------------ 3 files changed, 35 insertions(+), 37 deletions(-) rename lib/{test_user_copy.c => user_copy_kunit.c} (91%) diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 9ad9210d70a1..f699a3624ae7 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -2078,18 +2078,6 @@ config TEST_VMALLOC If unsure, say N. -config TEST_USER_COPY - tristate "Test user/kernel boundary protections" - depends on m - help - This builds the "test_user_copy" module that runs sanity checks - on the copy_to/from_user infrastructure, making sure basic - user/kernel boundary testing is working. If it fails to load, - a regression has been detected in the user/kernel memory boundary - protections. - - If unsure, say N. - config TEST_BPF tristate "Test BPF filter functionality" depends on m && NET @@ -2154,6 +2142,22 @@ config SYSCTL_KUNIT_TEST If unsure, say N. +config USER_COPY_KUNIT + tristate "KUnit Test for user/kernel boundary protections" + depends on KUNIT + depends on m + help + This builds the "user_copy_kunit" module that runs sanity checks + on the copy_to/from_user infrastructure, making sure basic + user/kernel boundary testing is working. If it fails to load, + a regression has been detected in the user/kernel memory boundary + protections. + + For more information on KUnit and unit tests in general please refer + to the KUnit documentation in Documentation/dev-tools/kunit/. + + If unsure, say N. + config LIST_KUNIT_TEST tristate "KUnit Test for Kernel Linked-list structures" if !KUNIT_ALL_TESTS depends on KUNIT diff --git a/lib/Makefile b/lib/Makefile index b1c42c10073b..8c145f85accc 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -78,7 +78,6 @@ obj-$(CONFIG_TEST_VMALLOC) += test_vmalloc.o obj-$(CONFIG_TEST_OVERFLOW) += test_overflow.o obj-$(CONFIG_TEST_RHASHTABLE) += test_rhashtable.o obj-$(CONFIG_TEST_SORT) += test_sort.o -obj-$(CONFIG_TEST_USER_COPY) += test_user_copy.o obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_keys.o obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_key_base.o obj-$(CONFIG_TEST_PRINTF) += test_printf.o @@ -318,3 +317,4 @@ obj-$(CONFIG_OBJAGG) += objagg.o # KUnit tests obj-$(CONFIG_LIST_KUNIT_TEST) += list-test.o obj-$(CONFIG_LINEAR_RANGES_TEST) += test_linear_ranges.o +obj-$(CONFIG_USER_COPY_KUNIT) += user_copy_kunit.o diff --git a/lib/test_user_copy.c b/lib/user_copy_kunit.c similarity index 91% rename from lib/test_user_copy.c rename to lib/user_copy_kunit.c index 5ff04d8fe971..a10ddd15b4cd 100644 --- a/lib/test_user_copy.c +++ b/lib/user_copy_kunit.c @@ -16,6 +16,7 @@ #include <linux/slab.h> #include <linux/uaccess.h> #include <linux/vmalloc.h> +#include <kunit/test.h> /* * Several 32-bit architectures support 64-bit {get,put}_user() calls. @@ -35,7 +36,7 @@ ({ \ int cond = (condition); \ if (cond) \ - pr_warn("[%d] " msg "\n", __LINE__, ##__VA_ARGS__); \ + KUNIT_EXPECT_FALSE_MSG(test, cond, msg, ##__VA_ARGS__); \ cond; \ }) @@ -44,7 +45,7 @@ static bool is_zeroed(void *from, size_t size) return memchr_inv(from, 0x0, size) == NULL; } -static int test_check_nonzero_user(char *kmem, char __user *umem, size_t size) +static int test_check_nonzero_user(struct kunit *test, char *kmem, char __user *umem, size_t size) { int ret = 0; size_t start, end, i, zero_start, zero_end; @@ -102,7 +103,7 @@ static int test_check_nonzero_user(char *kmem, char __user *umem, size_t size) return ret; } -static int test_copy_struct_from_user(char *kmem, char __user *umem, +static int test_copy_struct_from_user(struct kunit *test, char *kmem, char __user *umem, size_t size) { int ret = 0; @@ -177,7 +178,7 @@ static int test_copy_struct_from_user(char *kmem, char __user *umem, return ret; } -static int __init test_user_copy_init(void) +static void user_copy_test(struct kunit *test) { int ret = 0; char *kmem; @@ -192,16 +193,14 @@ static int __init test_user_copy_init(void) #endif kmem = kmalloc(PAGE_SIZE * 2, GFP_KERNEL); - if (!kmem) - return -ENOMEM; + KUNIT_EXPECT_FALSE_MSG(test, kmem == NULL, "kmalloc failed"); user_addr = vm_mmap(NULL, 0, PAGE_SIZE * 2, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_ANONYMOUS | MAP_PRIVATE, 0); if (user_addr >= (unsigned long)(TASK_SIZE)) { - pr_warn("Failed to allocate user memory\n"); kfree(kmem); - return -ENOMEM; + KUNIT_FAIL(test, "Failed to allocate user memory"); } usermem = (char __user *)user_addr; @@ -245,9 +244,9 @@ static int __init test_user_copy_init(void) #undef test_legit /* Test usage of check_nonzero_user(). */ - ret |= test_check_nonzero_user(kmem, usermem, 2 * PAGE_SIZE); + ret |= test_check_nonzero_user(test, kmem, usermem, 2 * PAGE_SIZE); /* Test usage of copy_struct_from_user(). */ - ret |= test_copy_struct_from_user(kmem, usermem, 2 * PAGE_SIZE); + ret |= test_copy_struct_from_user(test, kmem, usermem, 2 * PAGE_SIZE); /* * Invalid usage: none of these copies should succeed. @@ -309,23 +308,18 @@ static int __init test_user_copy_init(void) vm_munmap(user_addr, PAGE_SIZE * 2); kfree(kmem); - - if (ret == 0) { - pr_info("tests passed.\n"); - return 0; - } - - return -EINVAL; } -module_init(test_user_copy_init); - -static void __exit test_user_copy_exit(void) -{ - pr_info("unloaded.\n"); -} +static struct kunit_case user_copy_test_cases[] = { + KUNIT_CASE(user_copy_test), + {} +}; -module_exit(test_user_copy_exit); +static struct kunit_suite user_copy_test_suite = { + .name = "user_copy", + .test_cases = user_copy_test_cases, +}; +kunit_test_suites(&user_copy_test_suite); MODULE_AUTHOR("Kees Cook <keescook(a)chromium.org>"); MODULE_LICENSE("GPL"); base-commit: d43c7fb05765152d4d4a39a8ef957c4ea14d8847 -- 2.26.2

1 year, 3 months

4
11
0 0

[PATCH bpf-next 0/4] selftests/bpf: convert three other cgroup tests to test_progs

by Alexis Lothoré (eBPF Foundation)

Hello, this series brings a new set of test converted to the test_progs framework. Since the tests are quite small, I chose to group three tests conversion in the same series, but feel free to let me know if I should keep one series per test. The series focuses on cgroup testing and converts the following tests: - get_cgroup_id_user - cgroup_storage - test_skb_cgroup_id_user Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore(a)bootlin.com> --- Alexis Lothoré (eBPF Foundation) (4): selftests/bpf: convert get_current_cgroup_id_user to test_progs selftests/bpf: convert test_cgroup_storage to test_progs selftests/bpf: add proper section name to bpf prog and rename it selftests/bpf: convert test_skb_cgroup_id_user to test_progs tools/testing/selftests/bpf/.gitignore | 3 - tools/testing/selftests/bpf/Makefile | 8 +- tools/testing/selftests/bpf/get_cgroup_id_user.c | 151 ----------------- .../selftests/bpf/prog_tests/cgroup_ancestor.c | 159 ++++++++++++++++++ .../bpf/prog_tests/cgroup_get_current_cgroup_id.c | 58 +++++++ .../selftests/bpf/prog_tests/cgroup_storage.c | 65 ++++++++ ...test_skb_cgroup_id_kern.c => cgroup_ancestor.c} | 2 +- tools/testing/selftests/bpf/progs/cgroup_storage.c | 24 +++ tools/testing/selftests/bpf/test_cgroup_storage.c | 174 -------------------- tools/testing/selftests/bpf/test_skb_cgroup_id.sh | 63 ------- .../selftests/bpf/test_skb_cgroup_id_user.c | 183 --------------------- 11 files changed, 309 insertions(+), 581 deletions(-) --- base-commit: 0e2eaf4b33f65e904b69bae6b956f3f610dbba9a change-id: 20240725-convert_cgroup_tests-d07c66053225 Best regards, -- Alexis Lothoré, Bootlin Embedded Linux and Kernel engineering https://bootlin.com

1 year, 3 months

3
18
0 0

[PATCH v2 0/3] KVM: selftests: arm64: Make use of sysreg defintions in get-reg-list

by Mark Brown

The system register definitions in the arm64 get-reg-list are all done with directly specified magic numbers rather than using the definitions we import from the main kernel. This is error prone, and requires us to audit the additions to get-reg-list separately to what we do when specifying the registers for the main kernel. Since Marc has indicated that this isn't a deliberate or desired choice let's start using the constants we have defined. We first manually update the data used to filter registers based on ID register fields to use a simplified macro that specifies the register and ID field in a muc more compact fashion. This is done first since there is an error in the ID register field for the S1PIE registers. We then replace all the remaining named system register specifications with use of the existing KVM_ARM64_SYS_REG() macro. This is just a first step, there's a bunch more work we could be doing here, the main thing being making use of the encodings in arch/arm64/tools/sysreg to convert more of the registers (including updating as more registers are converted to use the generator). Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Changes in v2: - Add use of designated initalisers when converting filtering macros. - Manual handling of CNTV_CTL_EL0 and CNTV_CVAL_EL0. - Commit message tweaks. - Link to v1: https://lore.kernel.org/r/20240802-kvm-arm64-get-reg-list-v1-0-3a5bf8f80765… --- Mark Brown (3): KVM: selftests: arm64: Simplify specification of filtered registers KVM: selftests: arm64: Use symbolic definitions for incorrect encodings KVM: selftests: arm64: Use generated defines for named system registers tools/testing/selftests/kvm/aarch64/get-reg-list.c | 244 ++++++++++----------- 1 file changed, 122 insertions(+), 122 deletions(-) --- base-commit: 8400291e289ee6b2bf9779ff1c83a291501f017b change-id: 20240802-kvm-arm64-get-reg-list-a86a37460bdd Best regards, -- Mark Brown <broonie(a)kernel.org>

1 year, 3 months

1
3
0 0

[PATCH] selftest/perf: Add perf-test to perform perf testcase

by Jeremy Szu

The perf test supports testing many functions and includes a way to detect the prerequisites for each test case. Add a script to launch the perf test. Signed-off-by: Jeremy Szu <jszu(a)nvidia.com> --- tools/testing/selftests/Makefile | 1 + tools/testing/selftests/perf/Makefile | 5 ++++ tools/testing/selftests/perf/perf_test.sh | 30 +++++++++++++++++++++++ tools/testing/selftests/perf/settings | 1 + 4 files changed, 37 insertions(+) create mode 100644 tools/testing/selftests/perf/Makefile create mode 100755 tools/testing/selftests/perf/perf_test.sh create mode 100644 tools/testing/selftests/perf/settings diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 9039f3709affb..7598dd39cad28 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -67,6 +67,7 @@ TARGETS += net/openvswitch TARGETS += net/tcp_ao TARGETS += net/netfilter TARGETS += nsfs +TARGETS += perf TARGETS += perf_events TARGETS += pidfd TARGETS += pid_namespace diff --git a/tools/testing/selftests/perf/Makefile b/tools/testing/selftests/perf/Makefile new file mode 100644 index 0000000000000..72d90c71ab290 --- /dev/null +++ b/tools/testing/selftests/perf/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + +TEST_PROGS := perf_test.sh + +include ../lib.mk diff --git a/tools/testing/selftests/perf/perf_test.sh b/tools/testing/selftests/perf/perf_test.sh new file mode 100755 index 0000000000000..ee78b4f9906cd --- /dev/null +++ b/tools/testing/selftests/perf/perf_test.sh @@ -0,0 +1,30 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +skip() { + echo "SKIP: $1" + exit 4 +} + +fail() { + echo "FAIL: $1" + exit 255 +} + +if [[ "${BASH_SOURCE[0]}" == "${0}" ]]; then + [ "$(id -u)" -ne 0 ] && \ + skip "this test must be run as root." + which perf >/dev/null 2>&1 || \ + skip "perf is not installed." + + cmd_output=$(perf test -vv 2>&1) + perf_ret=$? + + if [ $perf_ret -ne 0 ]; then + (IFS='\n'; echo $cmd_output) + fail "perf command returns non-zero." + elif [[ $cmd_output == *"FAILED!"* ]]; then + (IFS='\n'; echo $cmd_output) + fail "perf test got FAILED!" + fi +fi diff --git a/tools/testing/selftests/perf/settings b/tools/testing/selftests/perf/settings new file mode 100644 index 0000000000000..a62d2fa1275c6 --- /dev/null +++ b/tools/testing/selftests/perf/settings @@ -0,0 +1 @@ +timeout=600 -- 2.34.1

1 year, 3 months

1
0
0 0

[PATCH 0/2] KVM: selftests: arm64: Make use of sysreg defintions in get-reg-list

by Mark Brown

The system register definitions in the arm64 get-reg-list are all done with directly specified magic numbers rather than using the definitions we import from the main kernel. This is error prone, and requires us to audit the additions to get-reg-list separately to what we do when specifying the registers for the main kernel. Since Marc has indicated that this isn't a deliberate or desired choice let's start using the constants we have defined. We first manually update the data used to filter registers based on ID register fields to use a simplified macro that specifies the register and ID field in a muc more compact fashion. This is done first since there is an error in the ID register field for the S1PIE registers. We then replace all the remaining named system register specifications with use of the existing KVM_ARM64_SYS_REG() macro. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Mark Brown (2): KVM: selftests: arm64: Simplify specification of filtered registers KVM: selftests: arm64: Use generated defines for named system registers tools/testing/selftests/kvm/aarch64/get-reg-list.c | 237 ++++++++++----------- 1 file changed, 115 insertions(+), 122 deletions(-) --- base-commit: 8400291e289ee6b2bf9779ff1c83a291501f017b change-id: 20240802-kvm-arm64-get-reg-list-a86a37460bdd Best regards, -- Mark Brown <broonie(a)kernel.org>

1 year, 3 months

3
6
0 0

[PATCH] kunit: Fix kunit_kstrdup_const() with modules

by David Gow

In commit 7d3c33b290b1 ("kunit: Device wrappers should also manage driver name"), the kunit_kstrdup_const() and kunit_kfree_const() were introduced as an optimisation of kunit_kstrdup(), which only copy/free strings from the kernel rodata. However, these are inline functions, and is_kernel_rodata() only works for built-in code. This causes problems in two cases: - If kunit is built as a module, __{start,end}_rodata is not defined. - If a kunit test using these functions is built as a module, it will suffer the same fate. Restrict the is_kernel_rodata() case to when KUnit is built as a module, which fixes the first case, at the cost of losing the optimisation. Also, make kunit_{kstrdup,kfree}_const non-inline, so that other modules using them will not accidentally depend on is_kernel_rodata(). If KUnit is built-in, they'll benefit from the optimisation, if KUnit is not, they won't, but the string will be properly duplicated. (And fix a couple of typos in the doc comment, too.) Reported-by: Nico Pache <npache(a)redhat.com> Closes: https://lore.kernel.org/all/CAA1CXcDKht4vOL-acxrARbm6JhGna8_k8wjYJ-vHONink8… Fixes: 7d3c33b290b1 ("kunit: Device wrappers should also manage driver name") Signed-off-by: David Gow <davidgow(a)google.com> --- include/kunit/test.h | 16 +++------------- lib/kunit/test.c | 19 +++++++++++++++++++ 2 files changed, 22 insertions(+), 13 deletions(-) diff --git a/include/kunit/test.h b/include/kunit/test.h index da9e84de14c0..5ac237c949a0 100644 --- a/include/kunit/test.h +++ b/include/kunit/test.h @@ -489,11 +489,7 @@ static inline void *kunit_kcalloc(struct kunit *test, size_t n, size_t size, gfp * Calls kunit_kfree() only if @x is not in .rodata section. * See kunit_kstrdup_const() for more information. */ -static inline void kunit_kfree_const(struct kunit *test, const void *x) -{ - if (!is_kernel_rodata((unsigned long)x)) - kunit_kfree(test, x); -} +void kunit_kfree_const(struct kunit *test, const void *x); /** * kunit_kstrdup() - Duplicates a string into a test managed allocation. @@ -527,16 +523,10 @@ static inline char *kunit_kstrdup(struct kunit *test, const char *str, gfp_t gfp * @gfp: flags passed to underlying kmalloc(). * * Calls kunit_kstrdup() only if @str is not in the rodata section. Must be freed with - * kunit_free_const() -- not kunit_free(). + * kunit_kfree_const() -- not kunit_kfree(). * See kstrdup_const() and kunit_kmalloc_array() for more information. */ -static inline const char *kunit_kstrdup_const(struct kunit *test, const char *str, gfp_t gfp) -{ - if (is_kernel_rodata((unsigned long)str)) - return str; - - return kunit_kstrdup(test, str, gfp); -} +const char *kunit_kstrdup_const(struct kunit *test, const char *str, gfp_t gfp); /** * kunit_vm_mmap() - Allocate KUnit-tracked vm_mmap() area diff --git a/lib/kunit/test.c b/lib/kunit/test.c index e8b1b52a19ab..089c832e3cdb 100644 --- a/lib/kunit/test.c +++ b/lib/kunit/test.c @@ -874,6 +874,25 @@ void kunit_kfree(struct kunit *test, const void *ptr) } EXPORT_SYMBOL_GPL(kunit_kfree); +void kunit_kfree_const(struct kunit *test, const void *x) +{ +#if !IS_MODULE(CONFIG_KUNIT) + if (!is_kernel_rodata((unsigned long)x)) +#endif + kunit_kfree(test, x); +} +EXPORT_SYMBOL_GPL(kunit_kfree_const); + +const char *kunit_kstrdup_const(struct kunit *test, const char *str, gfp_t gfp) +{ +#if !IS_MODULE(CONFIG_KUNIT) + if (is_kernel_rodata((unsigned long)str)) + return str; +#endif + return kunit_kstrdup(test, str, gfp); +} +EXPORT_SYMBOL_GPL(kunit_kstrdup_const); + void kunit_cleanup(struct kunit *test) { struct kunit_resource *res; -- 2.46.0.rc2.264.g509ed76dc8-goog

1 year, 3 months

2
1
0 0

[PATCH] kunit: Device wrappers should also manage driver name

by David Gow

kunit_driver_create() accepts a name for the driver, but does not copy it, so if that name is either on the stack, or otherwise freed, we end up with a use-after-free when the driver is cleaned up. Instead, strdup() the name, and manage it as another KUnit allocation. As there was no existing kunit_kstrdup(), we add one. Further, add a kunit_ variant of strdup_const() and kfree_const(), so we don't need to allocate and manage the string in the majority of cases where it's a constant. This fixes a KASAN splat with overflow.overflow_allocation_test, when built as a module. Fixes: d03c720e03bd ("kunit: Add APIs for managing devices") Reported-by: Nico Pache <npache(a)redhat.com> Closes: https://groups.google.com/g/kunit-dev/c/81V9b9QYON0 Signed-off-by: David Gow <davidgow(a)google.com> Reviewed-by: Kees Cook <kees(a)kernel.org> --- There's some more serious changes since the RFC I sent, so please take a closer look. Thanks, -- David Changes since RFC: https://groups.google.com/g/kunit-dev/c/81V9b9QYON0/m/PFKNKDKAAAAJ - Add and use the kunit_kstrdup_const() and kunit_free_const() functions. - Fix a typo in the doc comments. --- include/kunit/test.h | 58 ++++++++++++++++++++++++++++++++++++++++++++ lib/kunit/device.c | 7 ++++-- 2 files changed, 63 insertions(+), 2 deletions(-) diff --git a/include/kunit/test.h b/include/kunit/test.h index e2a1f0928e8b..da9e84de14c0 100644 --- a/include/kunit/test.h +++ b/include/kunit/test.h @@ -28,6 +28,7 @@ #include <linux/types.h> #include <asm/rwonce.h> +#include <asm/sections.h> /* Static key: true if any KUnit tests are currently running */ DECLARE_STATIC_KEY_FALSE(kunit_running); @@ -480,6 +481,63 @@ static inline void *kunit_kcalloc(struct kunit *test, size_t n, size_t size, gfp return kunit_kmalloc_array(test, n, size, gfp | __GFP_ZERO); } + +/** + * kunit_kfree_const() - conditionally free test managed memory + * @x: pointer to the memory + * + * Calls kunit_kfree() only if @x is not in .rodata section. + * See kunit_kstrdup_const() for more information. + */ +static inline void kunit_kfree_const(struct kunit *test, const void *x) +{ + if (!is_kernel_rodata((unsigned long)x)) + kunit_kfree(test, x); +} + +/** + * kunit_kstrdup() - Duplicates a string into a test managed allocation. + * + * @test: The test context object. + * @str: The NULL-terminated string to duplicate. + * @gfp: flags passed to underlying kmalloc(). + * + * See kstrdup() and kunit_kmalloc_array() for more information. + */ +static inline char *kunit_kstrdup(struct kunit *test, const char *str, gfp_t gfp) +{ + size_t len; + char *buf; + + if (!str) + return NULL; + + len = strlen(str) + 1; + buf = kunit_kmalloc(test, len, gfp); + if (buf) + memcpy(buf, str, len); + return buf; +} + +/** + * kunit_kstrdup_const() - Conditionally duplicates a string into a test managed allocation. + * + * @test: The test context object. + * @str: The NULL-terminated string to duplicate. + * @gfp: flags passed to underlying kmalloc(). + * + * Calls kunit_kstrdup() only if @str is not in the rodata section. Must be freed with + * kunit_free_const() -- not kunit_free(). + * See kstrdup_const() and kunit_kmalloc_array() for more information. + */ +static inline const char *kunit_kstrdup_const(struct kunit *test, const char *str, gfp_t gfp) +{ + if (is_kernel_rodata((unsigned long)str)) + return str; + + return kunit_kstrdup(test, str, gfp); +} + /** * kunit_vm_mmap() - Allocate KUnit-tracked vm_mmap() area * @test: The test context object. diff --git a/lib/kunit/device.c b/lib/kunit/device.c index 25c81ed465fb..520c1fccee8a 100644 --- a/lib/kunit/device.c +++ b/lib/kunit/device.c @@ -89,7 +89,7 @@ struct device_driver *kunit_driver_create(struct kunit *test, const char *name) if (!driver) return ERR_PTR(err); - driver->name = name; + driver->name = kunit_kstrdup_const(test, name, GFP_KERNEL); driver->bus = &kunit_bus_type; driver->owner = THIS_MODULE; @@ -192,8 +192,11 @@ void kunit_device_unregister(struct kunit *test, struct device *dev) const struct device_driver *driver = to_kunit_device(dev)->driver; kunit_release_action(test, device_unregister_wrapper, dev); - if (driver) + if (driver) { + const char *driver_name = driver->name; kunit_release_action(test, driver_unregister_wrapper, (void *)driver); + kunit_kfree_const(test, driver_name); + } } EXPORT_SYMBOL_GPL(kunit_device_unregister); -- 2.46.0.rc1.232.g9752f9e123-goog

1 year, 3 months

4
4
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror