- Linux-kselftest-mirror - lists.linaro.org

[PATCH v4 0/2] selftests/resctrl: SNC kernel support discovery

by Maciej Wieczor-Retman

Changes v4: - Printing SNC warnings at the start of every test. - Printing SNC warnings at the end of every relevant test. - Remove global snc_mode variable, consolidate snc detection functions into one. - Correct minor mistakes. Changes v3: - Reworked patch 2. - Changed minor things in patch 1 like function name and made corrections to the patch message. Changes v2: - Removed patches 2 and 3 since now this part will be supported by the kernel. Sub-Numa Clustering (SNC) allows splitting CPU cores, caches and memory into multiple NUMA nodes. When enabled, NUMA-aware applications can achieve better performance on bigger server platforms. SNC support in the kernel was merged into x86/cache [1]. With SNC enabled and kernel support in place all the tests will function normally (aside from effective cache size). There might be a problem when SNC is enabled but the system is still using an older kernel version without SNC support. Currently the only message displayed in that situation is a guess that SNC might be enabled and is causing issues. That message also is displayed whenever the test fails on an Intel platform. Add a mechanism to discover kernel support for SNC which will add more meaning and certainty to the error message. Add runtime SNC mode detection and verify how reliable that information is. Series was tested on Ice Lake server platforms with SNC disabled, SNC-2 and SNC-4. The tests were also ran with and without kernel support for SNC. Series applies cleanly on kselftest/next. [1] https://lore.kernel.org/all/20240628215619.76401-1-tony.luck@intel.com/ Previous versions of this series: [v1] https://lore.kernel.org/all/cover.1709721159.git.maciej.wieczor-retman@inte… [v2] https://lore.kernel.org/all/cover.1715769576.git.maciej.wieczor-retman@inte… [v3] https://lore.kernel.org/all/cover.1719842207.git.maciej.wieczor-retman@inte… Maciej Wieczor-Retman (2): selftests/resctrl: Adjust effective L3 cache size with SNC enabled selftests/resctrl: Adjust SNC support messages tools/testing/selftests/resctrl/cat_test.c | 8 ++ tools/testing/selftests/resctrl/cmt_test.c | 10 +- tools/testing/selftests/resctrl/mba_test.c | 7 + tools/testing/selftests/resctrl/mbm_test.c | 9 +- tools/testing/selftests/resctrl/resctrl.h | 7 + .../testing/selftests/resctrl/resctrl_tests.c | 8 +- tools/testing/selftests/resctrl/resctrlfs.c | 130 ++++++++++++++++++ 7 files changed, 174 insertions(+), 5 deletions(-) -- 2.45.2

1 year, 3 months

2
8
0 0

[PATCH 1/1 V4] selftests: net: improve missing modules error message

by David Hunter

The error message describing the required modules is inaccurate. Currently, only "SKIP: Need act_mirred module" is printed when any of the modules are missing. As a result, users might only include that module; however, three modules are required. Fix the error message to show any/all modules needed for the script file to properly execute. Signed-off-by: David Hunter <david.hunter.linux(a)gmail.com> --- V1 - https://lore.kernel.org/all/20240820202116.6124-1-david.hunter.linux@gmail.… V2 - https://lore.kernel.org/all/20240823054833.144612-1-david.hunter.linux@gmai… - included subject prefixes - split the patch into two separate patches (one for each issue) - fixed typos in message body - removed second, unnecessary for loop V3 - https://lore.kernel.org/all/20240827205629.51004-1-david.hunter.linux@gmail… - fixed subject prefix (omit capitilization) - fixed spelling mistake in commit message - fixed coding style based on recommendations --- .../selftests/net/test_ingress_egress_chaining.sh | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/test_ingress_egress_chaining.sh b/tools/testing/selftests/net/test_ingress_egress_chaining.sh index 08adff6bb3b6..007a5d04c3e1 100644 --- a/tools/testing/selftests/net/test_ingress_egress_chaining.sh +++ b/tools/testing/selftests/net/test_ingress_egress_chaining.sh @@ -13,10 +13,20 @@ if [ "$(id -u)" -ne 0 ];then fi needed_mods="act_mirred cls_flower sch_ingress" +mods_missing="" +numb_mods_needed=0 + for mod in $needed_mods; do - modinfo $mod &>/dev/null || { echo "SKIP: Need act_mirred module"; exit $ksft_skip; } + modinfo $mod &>/dev/null && continue + mods_missing="$mods_missing$mod " + numb_mods_needed=$(expr $numb_mods_needed + 1) done +if [ $numb_mods_needed -gt 0 ]; then + echo "SKIP: $numb_mods_needed modules needed: $mods_missing" + exit $ksft_skip +fi + ns="ns$((RANDOM%899+100))" veth1="veth1$((RANDOM%899+100))" veth2="veth2$((RANDOM%899+100))" -- 2.43.0

1 year, 3 months

2
2
0 0

[PATCH v2] selftests: livepatch: test livepatching a kprobed function

by Michael Vetter

The test proves that a function that is being kprobed and uses a post_handler cannot be livepatched. Only one ftrace_ops with FTRACE_OPS_FL_IPMODIFY set may be registered to any given function at a time. Signed-off-by: Michael Vetter <mvetter(a)suse.com> --- V2: Save and restore kprobe state. tools/testing/selftests/livepatch/Makefile | 3 +- .../selftests/livepatch/test-kprobe.sh | 65 +++++++++++++++++++ .../selftests/livepatch/test_modules/Makefile | 3 +- .../livepatch/test_modules/test_klp_kprobe.c | 38 +++++++++++ 4 files changed, 107 insertions(+), 2 deletions(-) create mode 100755 tools/testing/selftests/livepatch/test-kprobe.sh create mode 100644 tools/testing/selftests/livepatch/test_modules/test_klp_kprobe.c diff --git a/tools/testing/selftests/livepatch/Makefile b/tools/testing/selftests/livepatch/Makefile index 35418a4790be..a080eb54a215 100644 --- a/tools/testing/selftests/livepatch/Makefile +++ b/tools/testing/selftests/livepatch/Makefile @@ -10,7 +10,8 @@ TEST_PROGS := \ test-state.sh \ test-ftrace.sh \ test-sysfs.sh \ - test-syscall.sh + test-syscall.sh \ + test-kprobe.sh TEST_FILES := settings diff --git a/tools/testing/selftests/livepatch/test-kprobe.sh b/tools/testing/selftests/livepatch/test-kprobe.sh new file mode 100755 index 000000000000..fb7e9914f4a0 --- /dev/null +++ b/tools/testing/selftests/livepatch/test-kprobe.sh @@ -0,0 +1,65 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2024 SUSE +# Author: Michael Vetter <mvetter(a)suse.com> + +. $(dirname $0)/functions.sh + +MOD_LIVEPATCH=test_klp_livepatch +MOD_KPROBE=test_klp_kprobe + +setup_config + +# Kprobe a function and verify that we can't livepatch that same function +# when it uses a post_handler since only one IPMODIFY maybe be registered +# to any given function at a time. + +start_test "livepatch interaction with kprobed function with post_handler" + +STATE=$(cat /sys/kernel/debug/kprobes/enabled) +echo 1 > /sys/kernel/debug/kprobes/enabled + +load_mod $MOD_KPROBE has_post_handler=true +load_failing_mod $MOD_LIVEPATCH +unload_mod $MOD_KPROBE + +check_result "% insmod test_modules/test_klp_kprobe.ko has_post_handler=true +% insmod test_modules/$MOD_LIVEPATCH.ko +livepatch: enabling patch '$MOD_LIVEPATCH' +livepatch: '$MOD_LIVEPATCH': initializing patching transition +livepatch: failed to register ftrace handler for function 'cmdline_proc_show' (-16) +livepatch: failed to patch object 'vmlinux' +livepatch: failed to enable patch '$MOD_LIVEPATCH' +livepatch: '$MOD_LIVEPATCH': canceling patching transition, going to unpatch +livepatch: '$MOD_LIVEPATCH': completing unpatching transition +livepatch: '$MOD_LIVEPATCH': unpatching complete +insmod: ERROR: could not insert module test_modules/$MOD_LIVEPATCH.ko: Device or resource busy +% rmmod test_klp_kprobe" + +start_test "livepatch interaction with kprobed function without post_handler" + +load_mod $MOD_KPROBE has_post_handler=false +load_lp $MOD_LIVEPATCH + +unload_mod $MOD_KPROBE +disable_lp $MOD_LIVEPATCH +unload_lp $MOD_LIVEPATCH + +check_result "% insmod test_modules/test_klp_kprobe.ko has_post_handler=false +% insmod test_modules/$MOD_LIVEPATCH.ko +livepatch: enabling patch '$MOD_LIVEPATCH' +livepatch: '$MOD_LIVEPATCH': initializing patching transition +livepatch: '$MOD_LIVEPATCH': starting patching transition +livepatch: '$MOD_LIVEPATCH': completing patching transition +livepatch: '$MOD_LIVEPATCH': patching complete +% rmmod test_klp_kprobe +% echo 0 > /sys/kernel/livepatch/$MOD_LIVEPATCH/enabled +livepatch: '$MOD_LIVEPATCH': initializing unpatching transition +livepatch: '$MOD_LIVEPATCH': starting unpatching transition +livepatch: '$MOD_LIVEPATCH': completing unpatching transition +livepatch: '$MOD_LIVEPATCH': unpatching complete +% rmmod $MOD_LIVEPATCH" + +echo $STATE > /sys/kernel/debug/kprobes/enabled + +exit 0 diff --git a/tools/testing/selftests/livepatch/test_modules/Makefile b/tools/testing/selftests/livepatch/test_modules/Makefile index e6e638c4bcba..4981d270f128 100644 --- a/tools/testing/selftests/livepatch/test_modules/Makefile +++ b/tools/testing/selftests/livepatch/test_modules/Makefile @@ -11,7 +11,8 @@ obj-m += test_klp_atomic_replace.o \ test_klp_state2.o \ test_klp_state3.o \ test_klp_shadow_vars.o \ - test_klp_syscall.o + test_klp_syscall.o \ + test_klp_kprobe.o # Ensure that KDIR exists, otherwise skip the compilation modules: diff --git a/tools/testing/selftests/livepatch/test_modules/test_klp_kprobe.c b/tools/testing/selftests/livepatch/test_modules/test_klp_kprobe.c new file mode 100644 index 000000000000..49b579ea1054 --- /dev/null +++ b/tools/testing/selftests/livepatch/test_modules/test_klp_kprobe.c @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2024 Marcos Paulo de Souza <mpdesouza(a)suse.com> +// Copyright (C) 2024 Michael Vetter <mvetter(a)suse.com> + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/kprobes.h> + +static bool has_post_handler = true; +module_param(has_post_handler, bool, 0444); + +static void __kprobes post_handler(struct kprobe *p, struct pt_regs *regs, + unsigned long flags) +{ +} + +static struct kprobe kp = { + .symbol_name = "cmdline_proc_show", +}; + +static int __init kprobe_init(void) +{ + if (has_post_handler) + kp.post_handler = post_handler; + + return register_kprobe(&kp); +} + +static void __exit kprobe_exit(void) +{ + unregister_kprobe(&kp); +} + +module_init(kprobe_init) +module_exit(kprobe_exit) +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Michael Vetter <mvetter(a)suse.com>"); +MODULE_DESCRIPTION("Livepatch test: livepatch kprobed function"); -- 2.46.0

1 year, 3 months

2
1
0 0

[PATCH RESEND v2] selftests/futex: Order calls in futex_requeue

by Edward Liaw

Fixes a race between parent and child threads in futex_requeue. Similar to fbf4dec70277 ("selftests/futex: Order calls to futex_lock_pi"), which fixed a flake in futex_lock_pi due to racing between the parent and child threads. The same issue can occur in the futex_requeue test, because it expects waiterfn to make progress to futex_wait before the parent starts to requeue. This is mitigated by the parent sleeping for WAKE_WAIT_US, but it still fails occasionally. This can be reproduced by adding a sleep in the waiterfn before futex_wait: TAP version 13 1..2 not ok 1 futex_requeue simple returned: 0 not ok 2 futex_requeue simple returned: 0 not ok 3 futex_requeue many returned: 0 not ok 4 futex_requeue many returned: 0 Instead, replace the sleep with barriers to make the sequencing explicit. Fixes: 7cb5dd8e2c8c ("selftests: futex: Add futex compare requeue test") Signed-off-by: Edward Liaw <edliaw(a)google.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> Reviewed-by: André Almeida <andrealmeid(a)igalia.com> --- .../selftests/futex/functional/futex_requeue.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/futex/functional/futex_requeue.c b/tools/testing/selftests/futex/functional/futex_requeue.c index 51485be6eb2f..8f7d3e8bf32a 100644 --- a/tools/testing/selftests/futex/functional/futex_requeue.c +++ b/tools/testing/selftests/futex/functional/futex_requeue.c @@ -12,9 +12,9 @@ #define TEST_NAME "futex-requeue" #define timeout_ns 30000000 -#define WAKE_WAIT_US 10000 volatile futex_t *f1; +static pthread_barrier_t barrier; void usage(char *prog) { @@ -32,6 +32,8 @@ void *waiterfn(void *arg) to.tv_sec = 0; to.tv_nsec = timeout_ns; + pthread_barrier_wait(&barrier); + if (futex_wait(f1, *f1, &to, 0)) printf("waiter failed errno %d\n", errno); @@ -70,13 +72,15 @@ int main(int argc, char *argv[]) ksft_print_msg("%s: Test futex_requeue\n", basename(argv[0])); + pthread_barrier_init(&barrier, NULL, 2); /* * Requeue a waiter from f1 to f2, and wake f2. */ if (pthread_create(&waiter[0], NULL, waiterfn, NULL)) error("pthread_create failed\n", errno); - usleep(WAKE_WAIT_US); + pthread_barrier_wait(&barrier); + pthread_barrier_destroy(&barrier); info("Requeuing 1 futex from f1 to f2\n"); res = futex_cmp_requeue(f1, 0, &f2, 0, 1, 0); @@ -99,6 +103,7 @@ int main(int argc, char *argv[]) ksft_test_result_pass("futex_requeue simple succeeds\n"); } + pthread_barrier_init(&barrier, NULL, 11); /* * Create 10 waiters at f1. At futex_requeue, wake 3 and requeue 7. @@ -109,7 +114,8 @@ int main(int argc, char *argv[]) error("pthread_create failed\n", errno); } - usleep(WAKE_WAIT_US); + pthread_barrier_wait(&barrier); + pthread_barrier_destroy(&barrier); info("Waking 3 futexes at f1 and requeuing 7 futexes from f1 to f2\n"); res = futex_cmp_requeue(f1, 0, &f2, 3, 7, 0); -- 2.46.0.662.g92d0881bb0-goog

1 year, 3 months

1
0
0 0

[RESEND PATCH v2] list: test: Mending tests for list_cut_position()

by I Hsin Cheng

Mending test for list_cut_position*() for the missing check of integer "i" after the second loop. The variable should be checked for second time to make sure both lists after the cut operation are formed as expected. Signed-off-by: I Hsin Cheng <richard120310(a)gmail.com> --- lib/list-test.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/lib/list-test.c b/lib/list-test.c index 37cbc33e9fdb..8d1d47a9fe9e 100644 --- a/lib/list-test.c +++ b/lib/list-test.c @@ -404,10 +404,13 @@ static void list_test_list_cut_position(struct kunit *test) KUNIT_EXPECT_EQ(test, i, 2); + i = 0; list_for_each(cur, &list1) { KUNIT_EXPECT_PTR_EQ(test, cur, &entries[i]); i++; } + + KUNIT_EXPECT_EQ(test, i, 1); } static void list_test_list_cut_before(struct kunit *test) @@ -432,10 +435,13 @@ static void list_test_list_cut_before(struct kunit *test) KUNIT_EXPECT_EQ(test, i, 1); + i = 0; list_for_each(cur, &list1) { KUNIT_EXPECT_PTR_EQ(test, cur, &entries[i]); i++; } + + KUNIT_EXPECT_EQ(test, i, 2); } static void list_test_list_splice(struct kunit *test) -- 2.43.0

1 year, 3 months

2
1
0 0

[PATCH v4 00/30] riscv control-flow integrity for usermode

by Deepak Gupta

v4 for cpu assisted riscv user mode control flow integrity. zicfiss and zicfilp [1] are ratified riscv CPU extensions. v3 [2] was sent in April this year for riscv usermode control flow integrity enabling. To get more information on zicfilp and zicfiss riscv CPU extensions, patch series adds documentation for `zicfilp` and `zicfiss` Documentation/arch/riscv/zicfiss.rst Documentation/arch/riscv/zicfilp.rst Additionally, spec can be obtained from [1]. How to test this series ======================= Toolchain --------- $ git clone git@github.com:sifive/riscv-gnu-toolchain.git -b cfi-dev $ riscv-gnu-toolchain/configure --prefix=<path-to-where-to-build> --with-arch=rv64gc_zicfilp_zicfiss --enable-linux --disable-gdb --with-extra-multilib-test="rv64gc_zicfilp_zicfiss-lp64d:-static" $ make -j$(nproc) Qemu ---- $ git clone git@github.com:deepak0414/qemu.git -b zicfilp_zicfiss_ratified_master_july11 $ cd qemu $ mkdir build $ cd build $ ../configure --target-list=riscv64-softmmu $ make -j$(nproc) Opensbi ------- $ git clone git@github.com:deepak0414/opensbi.git -b cfi_spec_split_opensbi $ make CROSS_COMPILE=<your riscv toolchain> -j$(nproc) PLATFORM=generic Linux ----- Running defconfig is fine. CFI is enabled by default if the toolchain supports it. $ make ARCH=riscv CROSS_COMPILE=<path-to-cfi-riscv-gnu-toolchain>/build/bin/riscv64-unknown-linux-gnu- -j$(nproc) defconfig $ make ARCH=riscv CROSS_COMPILE=<path-to-cfi-riscv-gnu-toolchain>/build/bin/riscv64-unknown-linux-gnu- -j$(nproc) Running ------- Modify your qemu command to have: -bios <path-to-cfi-opensbi>/build/platform/generic/firmware/fw_dynamic.bin -cpu rv64,zicfilp=true,zicfiss=true,zimop=true,zcmop=true vDSO related Opens (in the flux) ================================= I am listing these opens for laying out plan and what to expect in future patch sets. And of course for the sake of discussion. Shadow stack and landing pad enabling in vDSO ---------------------------------------------- vDSO must have shadow stack and landing pad support compiled in for task to have shadow stack and landing pad support. This patch series doesn't enable that (yet). Enabling shadow stack support in vDSO should be straight forward (intend to do that in next versions of patch set). Enabling landing pad support in vDSO requires some collaboration with toolchain folks to follow a single label scheme for all object binaries. This is necessary to ensure that all indirect call-sites are setting correct label and target landing pads are decorated with same label scheme. How many vDSOs --------------- Shadow stack instructions are carved out of zimop (may be operations) and if CPU doesn't implement zimop, they're illegal instructions. Kernel could be running on a CPU which may or may not implement zimop. And thus kernel will have to carry 2 different vDSOs and expose the appropriate one depending on whether CPU implements zimop or not. [1] - https://github.com/riscv/riscv-cfi [2] - https://lore.kernel.org/lkml/20240403234054.2020347-1-debug@rivosinc.com/ --- changelog --------- v4 -- - rebased on 6.11-rc6 - envcfg: Converged with Samuel Holland's patches for envcfg management on per- thread basis. - vma_is_shadow_stack is renamed to is_vma_shadow_stack - picked up Mark Brown's `ARCH_HAS_USER_SHADOW_STACK` patch - signal context: using extended context management to maintain compatibility. - fixed `-Wmissing-prototypes` compiler warnings for prctl functions - Documentation fixes and amending typos. v3 -- envcfg: logic to pick up base envcfg had a bug where `ENVCFG_CBZE` could have been picked on per task basis, even though CPU didn't implement it. Fixed in this series. dt-bindings: As suggested, split into separate commit. fixed the messaging that spec is in public review arch_is_shadow_stack change: arch_is_shadow_stack changed to vma_is_shadow_stack hwprobe: zicfiss / zicfilp if present will get enumerated in hwprobe selftests: As suggested, added object and binary filenames to .gitignore Selftest binary anyways need to be compiled with cfi enabled compiler which will make sure that landing pad and shadow stack are enabled. Thus removed separate enable/disable tests. Cleaned up tests a bit. v2 -- - Using config `CONFIG_RISCV_USER_CFI`, kernel support for riscv control flow integrity for user mode programs can be compiled in the kernel. - Enabling of control flow integrity for user programs is left to user runtime - This patch series introduces arch agnostic `prctls` to enable shadow stack and indirect branch tracking. And implements them on riscv. Deepak Gupta (25): mm: helper `is_shadow_stack_vma` to check shadow stack vma riscv/Kconfig: enable HAVE_EXIT_THREAD for riscv riscv: zicfilp / zicfiss in dt-bindings (extensions.yaml) riscv: zicfiss / zicfilp enumeration riscv: zicfiss / zicfilp extension csr and bit definitions riscv: usercfi state for task and save/restore of CSR_SSP on trap entry/exit riscv/mm : ensure PROT_WRITE leads to VM_READ | VM_WRITE riscv mm: manufacture shadow stack pte riscv mmu: teach pte_mkwrite to manufacture shadow stack PTEs riscv mmu: write protect and shadow stack riscv/mm: Implement map_shadow_stack() syscall riscv/shstk: If needed allocate a new shadow stack on clone prctl: arch-agnostic prctl for indirect branch tracking riscv: Implements arch agnostic shadow stack prctls riscv: Implements arch agnostic indirect branch tracking prctls riscv/traps: Introduce software check exception riscv sigcontext: cfi state struct definition for sigcontext riscv signal: save and restore of shadow stack for signal riscv/kernel: update __show_regs to print shadow stack register riscv/ptrace: riscv cfi status and state via ptrace and in core files riscv/hwprobe: zicfilp / zicfiss enumeration in hwprobe riscv: create a config for shadow stack and landing pad instr support riscv: Documentation for landing pad / indirect branch tracking riscv: Documentation for shadow stack on riscv kselftest/riscv: kselftest for user mode cfi Mark Brown (2): mm: Introduce ARCH_HAS_USER_SHADOW_STACK prctl: arch-agnostic prctl for shadow stack Samuel Holland (3): riscv: Enable cbo.zero only when all harts support Zicboz riscv: Add support for per-thread envcfg CSR values riscv: Call riscv_user_isa_enable() only on the boot hart Documentation/arch/riscv/zicfilp.rst | 104 ++++ Documentation/arch/riscv/zicfiss.rst | 169 ++++++ .../devicetree/bindings/riscv/extensions.yaml | 12 + arch/riscv/Kconfig | 20 + arch/riscv/include/asm/asm-prototypes.h | 1 + arch/riscv/include/asm/cpufeature.h | 15 +- arch/riscv/include/asm/csr.h | 16 + arch/riscv/include/asm/entry-common.h | 2 + arch/riscv/include/asm/hwcap.h | 2 + arch/riscv/include/asm/mman.h | 24 + arch/riscv/include/asm/pgtable.h | 30 +- arch/riscv/include/asm/processor.h | 2 + arch/riscv/include/asm/switch_to.h | 8 + arch/riscv/include/asm/thread_info.h | 4 + arch/riscv/include/asm/usercfi.h | 142 +++++ arch/riscv/include/uapi/asm/hwprobe.h | 2 + arch/riscv/include/uapi/asm/ptrace.h | 18 + arch/riscv/include/uapi/asm/sigcontext.h | 3 + arch/riscv/kernel/Makefile | 2 + arch/riscv/kernel/asm-offsets.c | 4 + arch/riscv/kernel/cpufeature.c | 13 +- arch/riscv/kernel/entry.S | 29 + arch/riscv/kernel/process.c | 32 +- arch/riscv/kernel/ptrace.c | 83 +++ arch/riscv/kernel/signal.c | 62 ++- arch/riscv/kernel/smpboot.c | 2 - arch/riscv/kernel/suspend.c | 4 +- arch/riscv/kernel/sys_hwprobe.c | 2 + arch/riscv/kernel/sys_riscv.c | 10 + arch/riscv/kernel/traps.c | 38 ++ arch/riscv/kernel/usercfi.c | 506 ++++++++++++++++++ arch/riscv/mm/init.c | 2 +- arch/riscv/mm/pgtable.c | 17 + arch/x86/Kconfig | 1 + fs/proc/task_mmu.c | 2 +- include/linux/cpu.h | 4 + include/linux/mm.h | 12 +- include/uapi/asm-generic/mman.h | 1 + include/uapi/linux/elf.h | 1 + include/uapi/linux/prctl.h | 48 ++ kernel/sys.c | 60 +++ mm/Kconfig | 6 + mm/gup.c | 2 +- mm/internal.h | 2 +- mm/mmap.c | 1 + tools/testing/selftests/riscv/Makefile | 2 +- tools/testing/selftests/riscv/cfi/.gitignore | 3 + tools/testing/selftests/riscv/cfi/Makefile | 10 + .../testing/selftests/riscv/cfi/cfi_rv_test.h | 83 +++ .../selftests/riscv/cfi/riscv_cfi_test.c | 82 +++ .../testing/selftests/riscv/cfi/shadowstack.c | 362 +++++++++++++ .../testing/selftests/riscv/cfi/shadowstack.h | 37 ++ 52 files changed, 2079 insertions(+), 20 deletions(-) create mode 100644 Documentation/arch/riscv/zicfilp.rst create mode 100644 Documentation/arch/riscv/zicfiss.rst create mode 100644 arch/riscv/include/asm/mman.h create mode 100644 arch/riscv/include/asm/usercfi.h create mode 100644 arch/riscv/kernel/usercfi.c create mode 100644 tools/testing/selftests/riscv/cfi/.gitignore create mode 100644 tools/testing/selftests/riscv/cfi/Makefile create mode 100644 tools/testing/selftests/riscv/cfi/cfi_rv_test.h create mode 100644 tools/testing/selftests/riscv/cfi/riscv_cfi_test.c create mode 100644 tools/testing/selftests/riscv/cfi/shadowstack.c create mode 100644 tools/testing/selftests/riscv/cfi/shadowstack.h -- 2.45.0

1 year, 3 months

8
45
0 0

[PATCH] selftests: riscv: Allow mmap test to compile on 32-bit

by Charlie Jenkins

Macros needed for 32-bit compilations were hidden behind 64-bit riscv ifdefs. Fix the 32-bit compilations by moving macros to allow the memory_layout test to run on 32-bit. Signed-off-by: Charlie Jenkins <charlie(a)rivosinc.com> Fixes: 73d05262a2ca ("selftests: riscv: Generalize mm selftests") --- tools/testing/selftests/riscv/mm/mmap_test.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/riscv/mm/mmap_test.h b/tools/testing/selftests/riscv/mm/mmap_test.h index 3b29ca3bb3d4..1c3313c201d5 100644 --- a/tools/testing/selftests/riscv/mm/mmap_test.h +++ b/tools/testing/selftests/riscv/mm/mmap_test.h @@ -48,11 +48,11 @@ uint32_t random_addresses[] = { }; #endif -// Only works on 64 bit -#if __riscv_xlen == 64 #define PROT (PROT_READ | PROT_WRITE) #define FLAGS (MAP_PRIVATE | MAP_ANONYMOUS) +// Only works on 64 bit +#if __riscv_xlen == 64 /* mmap must return a value that doesn't use more bits than the hint address. */ static inline unsigned long get_max_value(unsigned long input) { @@ -80,6 +80,8 @@ static inline unsigned long get_max_value(unsigned long input) }) #endif /* __riscv_xlen == 64 */ +#define TEST_MMAPS do { } while (0) + static inline int memory_layout(void) { void *value1 = mmap(NULL, sizeof(int), PROT, FLAGS, 0, 0); --- base-commit: 8400291e289ee6b2bf9779ff1c83a291501f017b change-id: 20240807-mmap_tests__fixes-651cc2b5fead -- - Charlie

1 year, 3 months

2
1
0 0

[GIT PULL] KUnit update for Linux 6.12-rc1

by Shuah Khan

Hi Linus, Please pull the following kunit update for Linux 6.12-rc1. This kunit update for Linux 6.12-rc1 consists of: -- a new int_pow test suite -- documentation update to clarify filename best practices -- kernel-doc fix for EXPORT_SYMBOL_IF_KUNIT -- change to build compile_commands.json automatically instead of requiring a manual build. diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit 8400291e289ee6b2bf9779ff1c83a291501f017b: Linux 6.11-rc1 (2024-07-28 14:19:55 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux_kselftest-kunit-6.12-rc1 for you to fetch changes up to 7fcc9b53216cd87f73cc6dbb404220350ddc93b8: lib/math: Add int_pow test suite (2024-09-12 10:03:00 -0600) ---------------------------------------------------------------- linux_kselftest-kunit-6.12-rc1 This kunit update for Linux 6.12-rc1 consists of: -- a new int_pow test suite -- documentation update to clarify filename best practices -- kernel-doc fix for EXPORT_SYMBOL_IF_KUNIT -- change to build compile_commands.json automatically instead of requiring a manual build. ---------------------------------------------------------------- Brendan Jackman (1): kunit: tool: Build compile_commands.json Kees Cook (1): Documentation: KUnit: Update filename best practices Luis Felipe Hernandez (1): lib/math: Add int_pow test suite Michal Wajdeczko (1): kunit: Fix kernel-doc for EXPORT_SYMBOL_IF_KUNIT Documentation/dev-tools/kunit/style.rst | 29 ++++++++++++------ include/kunit/visibility.h | 1 + lib/Kconfig.debug | 16 ++++++++++ lib/math/Makefile | 1 + lib/math/tests/Makefile | 3 ++ lib/math/tests/int_pow_kunit.c | 52 +++++++++++++++++++++++++++++++++ tools/testing/kunit/kunit_kernel.py | 3 +- 7 files changed, 95 insertions(+), 10 deletions(-) create mode 100644 lib/math/tests/Makefile create mode 100644 lib/math/tests/int_pow_kunit.c ----------------------------------------------------------------

1 year, 3 months

2
1
0 0

[GIT PULL] Kselftest update for Linux 6.12-rc1

by Shuah Khan

Hi Linus, Please pull the following kselftest next update for Linux 6.12-rc1. This kselftest update for Linux 6.12-rc1 consists of: -- test coverage for dup_fd() failure handling in unshare_fd() -- new selftest for the acct() syscall -- basic uprobe testcase -- several small fixes and cleanups to existing tests -- user and strscpy removal as they became kunit tests -- fixes to build failures and warnings diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit 8400291e289ee6b2bf9779ff1c83a291501f017b: Linux 6.11-rc1 (2024-07-28 14:19:55 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux_kselftest-next-6.12-rc1 for you to fetch changes up to a0474b8d5974e142461ac7584c996feea167bcc1: selftests: kselftest: Use strerror() on nolibc (2024-09-11 09:52:33 -0600) ---------------------------------------------------------------- linux_kselftest-next-6.12-rc1 This kselftest update for Linux 6.12-rc1 consists of: -- test coverage for dup_fd() failure handling in unshare_fd() -- new selftest for the acct() syscall -- basic uprobe testcase -- several small fixes and cleanups to existing tests -- user and strscpy removal as they became kunit tests -- fixes to build failures and warnings ---------------------------------------------------------------- Abdulrasaq Lawani (1): selftest: acct: Add selftest for the acct() syscall Abhinav Jain (1): selftests: filesystems: fix warn_unused_result build warnings Al Viro (1): selftests:core: test coverage for dup_fd() failure handling in unshare_fd() Anders Roxell (2): selftests: rust: config: add trailing newline selftests: rust: config: disable GCC_PLUGINS Chang Yu (1): selftests/exec: Fix grammar in an error message. Masahiro Yamada (2): selftests: harness: remove unneeded __constructor_order_last() selftests: harness: rename __constructor_order for clarification Masami Hiramatsu (Google) (3): selftests/uprobes: Add a basic uprobe testcase selftests/ftrace: Add required dependency for kprobe tests selftests/ftrace: Fix eventfs ownership testcase to find mount point Muhammad Usama Anjum (3): selftests: tpm2: redirect python unittest logs to stdout selftests: user: remove user suite selftests: lib: remove strscpy test Piotr Zalewski (1): kselftest: timers: Fix const correctness Shreeya Patel (1): kselftest: cpufreq: Add RTC wakeup alarm Shuah Khan (1): selftests:resctrl: Fix build failure on archs without __cpuid_count() Steven Rostedt (Google) (2): tracing/selftests: Run the ownership test twice selftests/ftrace: Fix test to handle both old and new kernels zhang jiao (2): selftests/timers: Remove unused NSEC_PER_SEC macro selftests: kselftest: Use strerror() on nolibc tools/testing/selftests/Makefile | 2 +- tools/testing/selftests/acct/.gitignore | 3 + tools/testing/selftests/acct/Makefile | 5 ++ tools/testing/selftests/acct/acct_syscall.c | 78 ++++++++++++++++++ tools/testing/selftests/core/Makefile | 2 +- tools/testing/selftests/core/unshare_test.c | 94 ++++++++++++++++++++++ tools/testing/selftests/cpufreq/cpufreq.sh | 15 ++++ tools/testing/selftests/cpufreq/main.sh | 13 ++- .../drivers/s390x/uvdevice/test_uvdevice.c | 6 -- tools/testing/selftests/exec/execveat.c | 2 +- .../filesystems/statmount/statmount_test_ns.c | 7 +- .../ftrace/test.d/00basic/test_ownership.tc | 46 +++++++---- .../ftrace/test.d/dynevent/add_remove_uprobe.tc | 26 ++++++ .../ftrace/test.d/ftrace/func_set_ftrace_file.tc | 9 ++- .../ftrace/test.d/kprobe/kprobe_args_char.tc | 2 +- .../ftrace/test.d/kprobe/kprobe_args_string.tc | 2 +- tools/testing/selftests/hid/hid_bpf.c | 6 -- tools/testing/selftests/kselftest.h | 10 +-- tools/testing/selftests/kselftest_harness.h | 18 +---- tools/testing/selftests/lib/Makefile | 3 +- tools/testing/selftests/lib/config | 1 - tools/testing/selftests/lib/strscpy.sh | 3 - tools/testing/selftests/resctrl/cat_test.c | 7 +- tools/testing/selftests/rtc/rtctest.c | 7 -- tools/testing/selftests/rust/config | 3 +- tools/testing/selftests/timers/change_skew.c | 3 - tools/testing/selftests/timers/skew_consistency.c | 2 - tools/testing/selftests/timers/threadtest.c | 4 +- tools/testing/selftests/tpm2/test_async.sh | 2 +- tools/testing/selftests/tpm2/test_smoke.sh | 2 +- tools/testing/selftests/tpm2/test_space.sh | 2 +- tools/testing/selftests/user/Makefile | 9 --- tools/testing/selftests/user/config | 1 - tools/testing/selftests/user/test_user_copy.sh | 18 ----- 34 files changed, 302 insertions(+), 111 deletions(-) create mode 100644 tools/testing/selftests/acct/.gitignore create mode 100644 tools/testing/selftests/acct/Makefile create mode 100644 tools/testing/selftests/acct/acct_syscall.c create mode 100644 tools/testing/selftests/core/unshare_test.c create mode 100644 tools/testing/selftests/ftrace/test.d/dynevent/add_remove_uprobe.tc delete mode 100755 tools/testing/selftests/lib/strscpy.sh delete mode 100644 tools/testing/selftests/user/Makefile delete mode 100644 tools/testing/selftests/user/config delete mode 100755 tools/testing/selftests/user/test_user_copy.sh ----------------------------------------------------------------

1 year, 3 months

2
1
0 0

[GIT PULL] nolibc for 6.12-rc1

by Shuah Khan

Hi Linus, Please pull the following nolibc update for Linux 6.12-rc1. This nolibc update for Linux 6.12-rc1 consists of: Highlights ---------- * Clang support (including LTO) Other Changes ------------- * stdbool.h support * argc/argv/envp arguments for constructors * Small #include ordering fix Test Results: Passed: tools/testing/selftests/nolibc/run-tests.sh tools/testing/selftests/nolibc/run-tests.sh -m user diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit 8400291e289ee6b2bf9779ff1c83a291501f017b: Linux 6.11-rc1 (2024-07-28 14:19:55 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux_kselftest-nolibc-6.12-rc1 for you to fetch changes up to 248f6b935bbd8f7bc211cce2b6fd76be4c449848: Merge tag 'nolibc-20240824-for-6.12-1' of https://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc into nolibc (2024-08-27 06:43:34 -0600) ---------------------------------------------------------------- linux_kselftest-nolibc-6.12-rc1 This nolibc update for Linux 6.12-rc1 consists of: Highlights ---------- * Clang support (including LTO) Other Changes ------------- * stdbool.h support * argc/argv/envp arguments for constructors * Small #include ordering fix ---------------------------------------------------------------- Shuah Khan (1): Merge tag 'nolibc-20240824-for-6.12-1' of https://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc into nolibc Thomas Weißschuh (21): tools/nolibc: include arch.h from string.h tools/nolibc: add stdbool.h header tools/nolibc: pass argc, argv and envp to constructors tools/nolibc: arm: use clang-compatible asm syntax tools/nolibc: mips: load current function to $t9 tools/nolibc: powerpc: limit stack-protector workaround to GCC tools/nolibc: compiler: introduce __nolibc_has_attribute() tools/nolibc: move entrypoint specifics to compiler.h tools/nolibc: compiler: use attribute((naked)) if available selftests/nolibc: report failure if no testcase passed selftests/nolibc: avoid passing NULL to printf("%s") selftests/nolibc: determine $(srctree) first selftests/nolibc: add support for LLVM= parameter selftests/nolibc: add cc-option compatible with clang cross builds selftests/nolibc: run-tests.sh: avoid overwriting CFLAGS_EXTRA selftests/nolibc: don't use libgcc when building with clang selftests/nolibc: use correct clang target for s390/systemz selftests/nolibc: run-tests.sh: allow building through LLVM tools/nolibc: crt: mark _start_c() as used tools/nolibc: stackprotector: mark implicitly used symbols as used tools/nolibc: x86_64: use local label in memcpy/memmove tools/include/nolibc/Makefile | 1 + tools/include/nolibc/arch-aarch64.h | 4 +-- tools/include/nolibc/arch-arm.h | 8 +++--- tools/include/nolibc/arch-i386.h | 4 +-- tools/include/nolibc/arch-loongarch.h | 4 +-- tools/include/nolibc/arch-mips.h | 8 ++++-- tools/include/nolibc/arch-powerpc.h | 6 ++-- tools/include/nolibc/arch-riscv.h | 4 +-- tools/include/nolibc/arch-s390.h | 4 +-- tools/include/nolibc/arch-x86_64.h | 8 +++--- tools/include/nolibc/compiler.h | 24 +++++++++++----- tools/include/nolibc/crt.h | 25 +++++++++-------- tools/include/nolibc/nolibc.h | 3 +- tools/include/nolibc/stackprotector.h | 4 +-- tools/include/nolibc/stdbool.h | 16 +++++++++++ tools/include/nolibc/string.h | 1 + tools/testing/selftests/nolibc/Makefile | 41 +++++++++++++++++++--------- tools/testing/selftests/nolibc/nolibc-test.c | 9 +++--- tools/testing/selftests/nolibc/run-tests.sh | 16 ++++++++--- 19 files changed, 123 insertions(+), 67 deletions(-) create mode 100644 tools/include/nolibc/stdbool.h ----------------------------------------------------------------

1 year, 3 months

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror