- Linux-kselftest-mirror - lists.linaro.org

[PATCH 0/5] Improve arm64 pkeys handling in signal delivery

by Kevin Brodsky

This series is a follow-up to Joey's Permission Overlay Extension (POE) series [1] that recently landed on mainline. The goal is to improve the way we handle the register that governs which pkeys/POIndex are accessible (POR_EL0) during signal delivery. As things stand, we may unexpectedly fail to write the signal frame on the stack because POR_EL0 is not reset before the uaccess operations. See patch 3 for more details and the main changes this series brings. A similar series landed recently for x86/MPK [2]; the present series aims at aligning arm64 with x86. Worth noting: once the signal frame is written, POR_EL0 is still set to POR_EL0_INIT, granting access to pkey 0 only. This means that a program that sets up an alternate signal stack with a non-zero pkey will need some assembly trampoline to set POR_EL0 before invoking the real signal handler, as discussed here [3]. The x86 series also added kselftests to ensure that no spurious SIGSEGV occurs during signal delivery regardless of which pkey is accessible at the point where the signal is delivered. This series adapts those kselftests to allow running them on arm64 (patch 4-5). Finally patch 2 is a clean-up following feedback on Joey's series [4]. I have tested this series on arm64 and x86_64 (booting and running the protection_keys and pkey_sighandler_tests mm kselftests). - Kevin [1] https://lore.kernel.org/linux-arm-kernel/20240822151113.1479789-1-joey.goul… [2] https://lore.kernel.org/lkml/20240802061318.2140081-1-aruna.ramakrishna@ora… [3] https://lore.kernel.org/lkml/CABi2SkWxNkP2O7ipkP67WKz0-LV33e5brReevTTtba6oK… [4] https://lore.kernel.org/linux-arm-kernel/20241015114116.GA19334@willie-the-… Cc: akpm(a)linux-foundation.org Cc: anshuman.khandual(a)arm.com Cc: aruna.ramakrishna(a)oracle.com Cc: broonie(a)kernel.org Cc: catalin.marinas(a)arm.com Cc: dave.hansen(a)linux.intel.com Cc: dave.martin(a)arm.com Cc: jeffxu(a)chromium.org Cc: joey.gouly(a)arm.com Cc: shuah(a)kernel.org Cc: will(a)kernel.org Cc: linux-kselftest(a)vger.kernel.org Cc: x86(a)kernel.org Kevin Brodsky (5): arm64: signal: Remove unused macro arm64: signal: Remove unnecessary check when saving POE state arm64: signal: Improve POR_EL0 handling to avoid uaccess failures selftests/mm: Use generic pkey register manipulation selftests/mm: Enable pkey_sighandler_tests on arm64 arch/arm64/kernel/signal.c | 92 +++++++++++++--- tools/testing/selftests/mm/Makefile | 8 +- tools/testing/selftests/mm/pkey-arm64.h | 1 + tools/testing/selftests/mm/pkey-x86.h | 2 + .../selftests/mm/pkey_sighandler_tests.c | 101 +++++++++++++----- 5 files changed, 159 insertions(+), 45 deletions(-) -- 2.43.0

10 months, 3 weeks

7
26
0 0

[PATCH] KVM: selftests: Fix build on on non-x86 architectures

by Mark Brown

Commit 9a400068a158 ("KVM: selftests: x86: Avoid using SSE/AVX instructions") unconditionally added -march=x86-64-v2 to the CFLAGS used to build the KVM selftests which does not work on non-x86 architectures: cc1: error: unknown value ‘x86-64-v2’ for ‘-march’ Fix this by making the addition of this x86 specific command line flag conditional on building for x86. Fixes: 9a400068a158 ("KVM: selftests: x86: Avoid using SSE/AVX instructions") Signed-off-by: Mark Brown <broonie(a)kernel.org> --- tools/testing/selftests/kvm/Makefile | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index e6b7e01d57080b304b21120f0d47bda260ba6c43..156fbfae940feac649f933dc6e048a2e2926542a 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -244,11 +244,13 @@ CFLAGS += -Wall -Wstrict-prototypes -Wuninitialized -O2 -g -std=gnu99 \ -fno-stack-protector -fno-PIE -I$(LINUX_TOOL_INCLUDE) \ -I$(LINUX_TOOL_ARCH_INCLUDE) -I$(LINUX_HDR_PATH) -Iinclude \ -I$(<D) -Iinclude/$(ARCH_DIR) -I ../rseq -I.. $(EXTRA_CFLAGS) \ - -march=x86-64-v2 \ $(KHDR_INCLUDES) ifeq ($(ARCH),s390) CFLAGS += -march=z10 endif +ifeq ($(ARCH),x86) + CFLAGS += -march=x86-64-v2 +endif ifeq ($(ARCH),arm64) tools_dir := $(top_srcdir)/tools arm64_tools_dir := $(tools_dir)/arch/arm64/tools/ --- base-commit: d129377639907fce7e0a27990e590e4661d3ee02 change-id: 20241021-kvm-build-break-495abedc51e0 Best regards, -- Mark Brown <broonie(a)kernel.org>

10 months, 3 weeks

3
2
0 0

[PATCH net-next v2 00/10] selftests: net: Introduce deferred commands

by Petr Machata

Recently, a defer helper was added to Python selftests. The idea is to keep cleanup commands close to their dirtying counterparts, thereby making it more transparent what is cleaning up what, making it harder to miss a cleanup, and make the whole cleanup business exception safe. All these benefits are applicable to bash as well, exception safety can be interpreted in terms of safety vs. a SIGINT. This patchset therefore introduces a framework of several helpers that serve to schedule cleanups in bash selftests. - Patch #1 has more details about the primitives being introduced. Patch #2 adds a fallback cleanup() function to lib.sh, because ideally selftests wouldn't need to introduce a dedicated cleanup function at all. - Patch #3 adds a parameter to stop_traffic(), which makes it possible to start other background processes after the traffic is started without confusing the cleanup. - Patches #4 to #10 convert a number of selftests. The goal was to convert all tests that use start_traffic / stop_traffic to the defer framework. Leftover traffic generators are a particularly painful sort of a missed cleanup. Normal unfinished cleanups can usually be cleaned up simply by rerunning the test and interrupting it early to let the cleanups run again / in full. This does not work with stop_traffic, because it is only issued at the end of the test case that starts the traffic. At the same time, leftover traffic generators influence follow-up test runs, and are hard to notice. The tests were however converted whole-sale, not just their traffic bits. Thus they form a proof of concept of the defer framework. v2: - Patch #1: - In __defer__schedule(), use ndefers in place of ${__DEFER__NJOBS[$ndefers_key]} - Patch #4: - Defer stop_traffic including the sleep. The sleep is actually necessary and v1 was wrong in that it had the sleep prior to the stop_traffic invocation. v1 (from the RFC): - Patch #1: - Added the priority defer track - Dropped defer_scoped_fn, added in_defer_scope - Extracted to a separate independent module - Patch #2: - Moved this bit to a separate patch - Patch #3: - New patch - Patch #4 (RED): - Squashed the individual RED-related patches into one - Converted the SW datapath RED selftest as well - Patch #5 (TBF): - Fully converted the selftest, not just stop_traffic - Patches #6, #7, #8, #9, #10: - New patch Petr Machata (10): selftests: net: lib: Introduce deferred commands selftests: forwarding: Add a fallback cleanup() selftests: forwarding: lib: Allow passing PID to stop_traffic() selftests: RED: Use defer for test cleanup selftests: TBF: Use defer for test cleanup selftests: ETS: Use defer for test cleanup selftests: mlxsw: qos_mc_aware: Use defer for test cleanup selftests: mlxsw: qos_ets_strict: Use defer for test cleanup selftests: mlxsw: qos_max_descriptors: Use defer for test cleanup selftests: mlxsw: devlink_trap_police: Use defer for test cleanup .../drivers/net/mlxsw/devlink_trap_policer.sh | 85 ++++---- .../drivers/net/mlxsw/qos_ets_strict.sh | 167 ++++++++-------- .../drivers/net/mlxsw/qos_max_descriptors.sh | 118 ++++------- .../drivers/net/mlxsw/qos_mc_aware.sh | 146 +++++++------- .../selftests/drivers/net/mlxsw/sch_ets.sh | 26 ++- .../drivers/net/mlxsw/sch_red_core.sh | 185 +++++++++--------- .../drivers/net/mlxsw/sch_red_ets.sh | 24 +-- .../drivers/net/mlxsw/sch_red_root.sh | 18 +- tools/testing/selftests/net/forwarding/lib.sh | 13 +- .../selftests/net/forwarding/sch_ets.sh | 7 +- .../selftests/net/forwarding/sch_ets_core.sh | 81 +++----- .../selftests/net/forwarding/sch_ets_tests.sh | 14 +- .../selftests/net/forwarding/sch_red.sh | 103 ++++------ .../selftests/net/forwarding/sch_tbf_core.sh | 91 +++------ .../net/forwarding/sch_tbf_etsprio.sh | 7 +- .../selftests/net/forwarding/sch_tbf_root.sh | 3 +- tools/testing/selftests/net/lib.sh | 3 + tools/testing/selftests/net/lib/Makefile | 2 +- tools/testing/selftests/net/lib/sh/defer.sh | 115 +++++++++++ 19 files changed, 595 insertions(+), 613 deletions(-) create mode 100644 tools/testing/selftests/net/lib/sh/defer.sh -- 2.45.0

10 months, 3 weeks

2
11
0 0

[PATCH] kselftest/arm64: Fail the overall fp-stress test if any test fails

by Mark Brown

Currently fp-stress does not report a top level test result if it runs to completion, it always exits with a return code 0. Use the ksft_finished() helper to ensure that the exit code for the top level program reports a failure if any of the individual tests has failed. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- tools/testing/selftests/arm64/fp/fp-stress.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/tools/testing/selftests/arm64/fp/fp-stress.c b/tools/testing/selftests/arm64/fp/fp-stress.c index faac24bdefeb9436e2daf20b7250d0ae25ca23a7..e62c9dbad5010234d70b477cf8c52ba0b312910e 100644 --- a/tools/testing/selftests/arm64/fp/fp-stress.c +++ b/tools/testing/selftests/arm64/fp/fp-stress.c @@ -651,7 +651,5 @@ int main(int argc, char **argv) drain_output(true); - ksft_print_cnts(); - - return 0; + ksft_finished(); } --- base-commit: 8e929cb546ee42c9a61d24fae60605e9e3192354 change-id: 20241017-arm64-fp-stress-exit-code-90fe21dc4bc3 Best regards, -- Mark Brown <broonie(a)kernel.org>

10 months, 3 weeks

2
1
0 0

[PATCH v3 0/5] Add support for the Idle HLT intercept feature

by Manali Shukla

The upcoming new Idle HLT Intercept feature allows for the HLT instruction execution by a vCPU to be intercepted by the hypervisor only if there are no pending V_INTR and V_NMI events for the vCPU. When the vCPU is expected to service the pending V_INTR and V_NMI events, the Idle HLT intercept won’t trigger. The feature allows the hypervisor to determine if the vCPU is actually idle and reduces wasteful VMEXITs. Presence of the Idle HLT Intercept feature is indicated via CPUID function Fn8000_000A_EDX[30]. Document for the Idle HLT intercept feature is available at [1]. [1]: AMD64 Architecture Programmer's Manual Pub. 24593, April 2024, Vol 2, 15.9 Instruction Intercepts (Table 15-7: IDLE_HLT). https://bugzilla.kernel.org/attachment.cgi?id=306250 Testing Done: - Added a selftest to test the Idle HLT intercept functionality. - Compile and functionality testing for the Idle HLT intercept selftest are only done for x86_64. - Tested SEV and SEV-ES guest for the Idle HLT intercept functionality. v2 -> v3 - Incorporated Andrew's suggestion to structure vcpu_stat_types in a way that each architecture can share the generic types and also provide its own. v1 -> v2 - Done changes in svm_idle_hlt_test based on the review comments from Sean. - Added an enum based approach to get binary stats in vcpu_get_stat() which doesn't use string to get stat data based on the comments from Sean. - Added self_halt() and cli() helpers based on the comments from Sean. Manali Shukla (5): x86/cpufeatures: Add CPUID feature bit for Idle HLT intercept KVM: SVM: Add Idle HLT intercept support KVM: selftests: Add safe_halt() and cli() helpers to common code KVM: selftests: Add an interface to read the data of named vcpu stat KVM: selftests: KVM: SVM: Add Idle HLT intercept test arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/include/asm/svm.h | 1 + arch/x86/include/uapi/asm/svm.h | 2 + arch/x86/kvm/svm/svm.c | 11 ++- tools/testing/selftests/kvm/Makefile | 1 + .../testing/selftests/kvm/include/kvm_util.h | 44 +++++++++ .../kvm/include/x86_64/kvm_util_arch.h | 40 +++++++++ .../selftests/kvm/include/x86_64/processor.h | 18 ++++ tools/testing/selftests/kvm/lib/kvm_util.c | 32 +++++++ .../selftests/kvm/x86_64/svm_idle_hlt_test.c | 89 +++++++++++++++++++ 10 files changed, 236 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/kvm/x86_64/svm_idle_hlt_test.c base-commit: d91a9cc16417b8247213a0144a1f0fd61dc855dd -- 2.34.1

10 months, 3 weeks

5
20
0 0

[PATCH v3 00/11] cover-letter: iommufd: Add vIOMMU infrastructure (Part-1)

by Nicolin Chen

This series introduces a new vIOMMU infrastructure and related ioctls. IOMMUFD has been using the HWPT infrastructure for all cases, including a nested IO page table support. Yet, there're limitations for an HWPT-based structure to support some advanced HW-accelerated features, such as CMDQV on NVIDIA Grace, and HW-accelerated vIOMMU on AMD. Even for a multi-IOMMU environment, it is not straightforward for nested HWPTs to share the same parent HWPT (stage-2 IO pagetable), with the HWPT infrastructure alone: a parent HWPT typically hold one stage-2 IO pagetable and tag it with only one ID in the cache entries. When sharing one large stage-2 IO pagetable across physical IOMMU instances, that one ID may not always be available across all the IOMMU instances. In other word, it's ideal for SW to have a different container for the stage-2 IO pagetable so it can hold another ID that's available. For this "different container", add vIOMMU, an additional layer to hold extra virtualization information: _______________________________________________________________________ | iommufd (with vIOMMU) | | | | [5] | | _____________ | | | | | | [1] | vIOMMU | [4] [2] | | ________________ | | _____________ ________ | | | | | [3] | | | | | | | | IOAS |<---|(HWPT_PAGING)|<---| HWPT_NESTED |<--| DEVICE | | | |________________| |_____________| |_____________| |________| | | | | | | | |_________|____________________|__________________|_______________|_____| | | | | | ______v_____ ______v_____ ___v__ | PFN storage | (paging) | | (nested) | |struct| |------------>|iommu_domain|<----|iommu_domain|<----|device| |____________| |____________| |______| The vIOMMU object should be seen as a slice of a physical IOMMU instance that is passed to or shared with a VM. That can be some HW/SW resources: - Security namespace for guest owned ID, e.g. guest-controlled cache tags - Access to a sharable nesting parent pagetable across physical IOMMUs - Virtualization of various platforms IDs, e.g. RIDs and others - Delivery of paravirtualized invalidation - Direct assigned invalidation queues - Direct assigned interrupts - Non-affiliated event reporting On a multi-IOMMU system, the vIOMMU object must be instanced to the number of the physical IOMMUs that are passed to (via devices) a guest VM, while being able to hold the shareable parent HWPT. Each vIOMMU then just needs to allocate its own individual ID to tag its own cache: ---------------------------- ---------------- | | paging_hwpt0 | | hwpt_nested0 |--->| viommu0 ------------------ ---------------- | | IDx | ---------------------------- ---------------------------- ---------------- | | paging_hwpt0 | | hwpt_nested1 |--->| viommu1 ------------------ ---------------- | | IDy | ---------------------------- As an initial part-1, add IOMMUFD_CMD_VIOMMU_ALLOC ioctl for an allocation only. Later series will add more data structures and their ioctls. As for the implementation of the series, add an IOMMU_VIOMMU_TYPE_DEFAULT type for a core-allocated-core-managed vIOMMU object, allowing drivers to simply hook a default viommu ops for viommu-based invalidation alone. And add support for driver-specific type of vIOMMU allocation, and implement that in the ARM SMMUv3 driver for a real world use case. More vIOMMU-based structs and ioctls will be introduced in the follow-up series to support vDEVICE, vIRQ (vEVENT) and VQUEUE objects. Although we repurposed the vIOMMU object from an earlier RFC, just for a referece: https://lore.kernel.org/all/cover.1712978212.git.nicolinc@nvidia.com/ This series is on Github: https://github.com/nicolinc/iommufd/commits/iommufd_viommu_p1-v3 (paring QEMU branch for testing will be provided with the part2 series) Changelog v3 * Rebased on top of Jason's nesting v3 series https://lore.kernel.org/all/0-v3-e2e16cd7467f+2a6a1-smmuv3_nesting_jgg@nvid… * Split the series into smaller parts * Added Jason's Reviewed-by * Added back viommu->iommu_dev * Added support for driver-allocated vIOMMU v.s. core-allocated * Dropped arm_smmu_cache_invalidate_user * Added an iommufd_test_wait_for_users() in selftest * Reworked test code to make viommu an individual FIXTURE * Added missing TEST_LENGTH case for the new ioctl command v2 https://lore.kernel.org/all/cover.1724776335.git.nicolinc@nvidia.com/ * Limited vdev_id to one per idev * Added a rw_sem to protect the vdev_id list * Reworked driver-level APIs with proper lockings * Added a new viommu_api file for IOMMUFD_DRIVER config * Dropped useless iommu_dev point from the viommu structure * Added missing index numnbers to new types in the uAPI header * Dropped IOMMU_VIOMMU_INVALIDATE uAPI; Instead, reuse the HWPT one * Reworked mock_viommu_cache_invalidate() using the new iommu helper * Reordered details of set/unset_vdev_id handlers for proper lockings v1 https://lore.kernel.org/all/cover.1723061377.git.nicolinc@nvidia.com/ Thanks! Nicolin Nicolin Chen (11): iommufd: Move struct iommufd_object to public iommufd header iommufd: Rename _iommufd_object_alloc to iommufd_object_alloc_elm iommufd: Introduce IOMMUFD_OBJ_VIOMMU and its related struct iommufd/viommu: Add IOMMU_VIOMMU_ALLOC ioctl iommu: Pass in a viommu pointer to domain_alloc_user op iommufd: Allow pt_id to carry viommu_id for IOMMU_HWPT_ALLOC iommufd/selftest: Add refcount to mock_iommu_device iommufd/selftest: Add IOMMU_VIOMMU_TYPE_SELFTEST iommufd/selftest: Add IOMMU_VIOMMU_ALLOC test coverage Documentation: userspace-api: iommufd: Update vIOMMU iommu/arm-smmu-v3: Add IOMMU_VIOMMU_TYPE_ARM_SMMUV3 support drivers/iommu/iommufd/Makefile | 5 +- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 18 ++++ drivers/iommu/iommufd/iommufd_private.h | 23 ++--- drivers/iommu/iommufd/iommufd_test.h | 2 + include/linux/iommu.h | 15 +++ include/linux/iommufd.h | 52 +++++++++++ include/uapi/linux/iommufd.h | 54 +++++++++-- tools/testing/selftests/iommu/iommufd_utils.h | 28 ++++++ drivers/iommu/amd/iommu.c | 1 + .../arm/arm-smmu-v3/arm-smmu-v3-iommufd.c | 24 +++++ drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 2 + drivers/iommu/intel/iommu.c | 1 + drivers/iommu/iommufd/hw_pagetable.c | 27 +++++- drivers/iommu/iommufd/main.c | 38 ++------ drivers/iommu/iommufd/selftest.c | 79 ++++++++++++++-- drivers/iommu/iommufd/viommu.c | 91 +++++++++++++++++++ drivers/iommu/iommufd/viommu_api.c | 57 ++++++++++++ tools/testing/selftests/iommu/iommufd.c | 84 +++++++++++++++++ Documentation/userspace-api/iommufd.rst | 66 +++++++++++++- 19 files changed, 602 insertions(+), 65 deletions(-) create mode 100644 drivers/iommu/iommufd/viommu.c create mode 100644 drivers/iommu/iommufd/viommu_api.c -- 2.43.0

10 months, 3 weeks

4
91
0 0

[PATCH bpf-next v1 0/4] Retire test_sock.c

by Jordan Rife

This patch series migrates test cases out of test_sock.c to prog_tests-style tests. It moves all BPF_CGROUP_INET4_POST_BIND and BPF_CGROUP_INET6_POST_BIND test cases into a new prog_test, sock_post_bind.c, while reimplementing all LOAD_REJECT test cases as verifier tests in progs/verifier_sock.c. Finally, it moves remaining BPF_CGROUP_INET_SOCK_CREATE test coverage into prog_tests/sock_create.c before retiring test_sock.c completely. Jordan Rife (4): selftests/bpf: Migrate *_POST_BIND test cases to prog_tests selftests/bpf: Migrate LOAD_REJECT test cases to prog_tests selftests/bpf: Migrate BPF_CGROUP_INET_SOCK_CREATE test cases to prog_tests selftests/bpf: Retire test_sock.c tools/testing/selftests/bpf/.gitignore | 1 - tools/testing/selftests/bpf/Makefile | 3 +- .../selftests/bpf/prog_tests/sock_create.c | 35 ++- .../sock_post_bind.c} | 251 ++++-------------- .../selftests/bpf/progs/verifier_sock.c | 60 +++++ 5 files changed, 142 insertions(+), 208 deletions(-) rename tools/testing/selftests/bpf/{test_sock.c => prog_tests/sock_post_bind.c} (64%) -- 2.47.0.rc1.288.g06298d1525-goog

10 months, 3 weeks

2
6
0 0

[PATCH v2] selftests/intel_pstate: fix operand expected

by Alessandro Zanni

This fix solves theses errors, when calling kselftest with targets "intel_pstate": ./run.sh: line 90: / 1000: syntax error: operand expected (error token is "/ 1000") ./run.sh: line 92: / 1000: syntax error: operand expected (error token is "/ 1000") To error was found by running tests manually with the command: make kselftest TARGETS=intel_pstate Signed-off-by: Alessandro Zanni <alessandro.zanni87(a)gmail.com> --- Notes: v2: removed debug echos tools/testing/selftests/intel_pstate/run.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/intel_pstate/run.sh b/tools/testing/selftests/intel_pstate/run.sh index e7008f614ad7..0c1b6c1308a4 100755 --- a/tools/testing/selftests/intel_pstate/run.sh +++ b/tools/testing/selftests/intel_pstate/run.sh @@ -87,9 +87,9 @@ mkt_freq=${_mkt_freq}0 # Get the ranges from cpupower _min_freq=$(cpupower frequency-info -l | tail -1 | awk ' { print $1 } ') -min_freq=$(($_min_freq / 1000)) +min_freq=$((_min_freq / 1000)) _max_freq=$(cpupower frequency-info -l | tail -1 | awk ' { print $2 } ') -max_freq=$(($_max_freq / 1000)) +max_freq=$((_max_freq / 1000)) [ $EVALUATE_ONLY -eq 0 ] && for freq in `seq $max_freq -100 $min_freq` -- 2.43.0

10 months, 3 weeks

2
5
0 0

[PATCH bpf-next v2 0/6] selftests/bpf: integrate test_tcp_check_syncookie.sh into test_progs

by Alexis Lothoré (eBPF Foundation)

Hello, this series aims to bring test_tcp_check_syncookie.sh scope into test_progs to make sure that the corresponding tests are also run automatically in CI. This script tests for bpf_tcp_{gen,check}_syncookie and bpf_skc_lookup_tcp, in different contexts (ipv4, v6 or dual, and with tc and xdp programs). Some other tests like btf_skc_cls_ingress have some overlapping tests with test_tcp_check_syncookie.sh, so this series moves the missing bits from test_tcp_check_syncookie.sh into btf_skc_cls_ingress, which is already integrated into test_progs. - the first three commits bring some minor improvements to btf_skc_cls_ingress without changing its testing scope - fourth and fifth commits bring test_tcp_check_syncookie.sh features into btf_skc_cls_ingress - last commit removes test_tcp_check_syncookie.sh The only topic for which I am not sure for this integration is the necessity or not to run the tests with different program types: test_tcp_check_syncookie.sh runs tests with both tc and xdp programs, but btf_skc_cls_ingress currently tests those helpers only with a tc program. Would it make sense to also make sure that btf_skc_cls_ingress is tested with all the programs types supported by those helpers ? The series has been tested both in CI and in a local x86_64 qemu environment: # ./test_progs -a btf_skc_cls_ingress #38/1 btf_skc_cls_ingress/conn_ipv4:OK #38/2 btf_skc_cls_ingress/conn_ipv6:OK #38/3 btf_skc_cls_ingress/conn_dual:OK #38/4 btf_skc_cls_ingress/syncookie_ipv4:OK #38/5 btf_skc_cls_ingress/syncookie_ipv6:OK #38/6 btf_skc_cls_ingress/syncookie_dual:OK #38 btf_skc_cls_ingress:OK Summary: 1/6 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore(a)bootlin.com> --- Changes in v2: - fix initial test author mail in Cc - Fix default cases in switches: indent, action - remove unneeded initializer - remove duplicate interface bring-up - remove unnecessary check and return in bpf program - Link to v1: https://lore.kernel.org/r/20241016-syncookie-v1-0-3b7a0de12153@bootlin.com --- Alexis Lothoré (eBPF Foundation) (6): selftests/bpf: factorize conn and syncookies tests in a single runner selftests/bpf: add missing ns cleanups in btf_skc_cls_ingress selftests/bpf: get rid of global vars in btf_skc_cls_ingress selftests/bpf: add ipv4 and dual ipv4/ipv6 support in btf_skc_cls_ingress selftests/bpf: test MSS value returned with bpf_tcp_gen_syncookie selftests/bpf: remove test_tcp_check_syncookie tools/testing/selftests/bpf/.gitignore | 1 - tools/testing/selftests/bpf/Makefile | 9 +- .../selftests/bpf/prog_tests/btf_skc_cls_ingress.c | 264 +++++++++++++-------- .../selftests/bpf/progs/test_btf_skc_cls_ingress.c | 82 ++++--- .../bpf/progs/test_tcp_check_syncookie_kern.c | 167 ------------- .../selftests/bpf/test_tcp_check_syncookie.sh | 85 ------- .../selftests/bpf/test_tcp_check_syncookie_user.c | 213 ----------------- 7 files changed, 217 insertions(+), 604 deletions(-) --- base-commit: 030207b7fce8bad6827615cfc2c6592916e2c336 change-id: 20241015-syncookie-ea7686264586 Best regards, -- Alexis Lothoré, Bootlin Embedded Linux and Kernel engineering https://bootlin.com

10 months, 3 weeks

2
7
0 0

[Bug Report] Wrong value of __NR_userfaultfd in asm-generic/unistd.h

by Muhammad Usama Anjum

Hi, The asm-generic/unistd.h file has wrong __NR_userfaultfd syscall number which doesn't even depend on the architecture. This has caused failure of a selftest which was fixed recently [1]. grep -rnIF "#define __NR_userfaultfd" tools/include/uapi/asm-generic/unistd.h:681:#define __NR_userfaultfd 282 arch/x86/include/generated/uapi/asm/unistd_32.h:374:#define __NR_userfaultfd 374 arch/x86/include/generated/uapi/asm/unistd_64.h:327:#define __NR_userfaultfd 323 arch/x86/include/generated/uapi/asm/unistd_x32.h:282:#define __NR_userfaultfd (__X32_SYSCALL_BIT + 323) arch/arm/include/generated/uapi/asm/unistd-eabi.h:347:#define __NR_userfaultfd (__NR_SYSCALL_BASE + 388) arch/arm/include/generated/uapi/asm/unistd-oabi.h:359:#define __NR_userfaultfd (__NR_SYSCALL_BASE + 388) include/uapi/asm-generic/unistd.h:681:#define __NR_userfaultfd 282 The number is dependent on the architecture. The above data shows that it is different for different arch: x86 374 x86_64 323 ARM 347/358 It seems include/uapi/asm-generic/unistd has wrong 282 value in it. Maybe I'm missing some context.. Please have a look at it. The __NR_userfaultfd was added to include/uapi/asm-generic/unistd.h in 09f7298100ea ("Subject: [PATCH] userfaultfd: register uapi generic syscall (aarch64)"). [1] https://lore.kernel.org/all/20240912103151.1520254-1-usama.anjum@collabora.… -- BR, /Muhammad Usama Anjum

10 months, 3 weeks

3
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror