- Linux-kselftest-mirror - lists.linaro.org

[PATCH net] selftests: forwarding: Avoid false MDB delete/flush failures

by Jamie Bainbridge

Running this test on a small system produces different failures every test checking deletions, and some flushes. From different test runs: TEST: Common host entries configuration tests (L2) [FAIL] Failed to delete L2 host entry TEST: Common port group entries configuration tests (IPv4 (S, G)) [FAIL] IPv4 (S, G) entry with VLAN 10 not deleted when VLAN was not specified TEST: Common port group entries configuration tests (IPv6 (*, G)) [FAIL] IPv6 (*, G) entry with VLAN 10 not deleted when VLAN was not specified TEST: Flush tests [FAIL] Entry not flushed by specified VLAN ID TEST: Flush tests [FAIL] IPv6 host entry not flushed by "nopermanent" state Add a short sleep after deletion and flush to resolve this. Tested using 25 test runs in a row, resulting in 100% pass OK. Create a variable just for this test to allow short sleep, the default WAIT_TIME of 5 seconds makes the test far longer than necessary. Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test") Signed-off-by: Jamie Bainbridge <jamie.bainbridge(a)gmail.com> --- .../selftests/net/forwarding/bridge_mdb.sh | 32 +++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/tools/testing/selftests/net/forwarding/bridge_mdb.sh b/tools/testing/selftests/net/forwarding/bridge_mdb.sh index d9d587454d207931a539f59be15cbc63d471888f..b3a2a7bc1824f4c394267b283b89e7a3ae19b0fb 100755 --- a/tools/testing/selftests/net/forwarding/bridge_mdb.sh +++ b/tools/testing/selftests/net/forwarding/bridge_mdb.sh @@ -30,6 +30,9 @@ ALL_TESTS=" ctrl_test " +# time to wait for delete and flush to complete +: "${SETTLE_DELAY:=0.1}" + NUM_NETIFS=4 source lib.sh source tc_common.sh @@ -152,6 +155,7 @@ cfg_test_host_common() check_fail $? "Managed to replace $name host entry" bridge mdb del dev br0 port br0 grp $grp $state vid 10 + sleep "$SETTLE_DELAY" bridge mdb get dev br0 grp $grp vid 10 &> /dev/null check_fail $? "Failed to delete $name host entry" @@ -208,6 +212,7 @@ cfg_test_port_common() check_err $? "Failed to replace $name entry" bridge mdb del dev br0 port $swp1 $grp_key permanent vid 10 + sleep "$SETTLE_DELAY" bridge mdb get dev br0 $grp_key vid 10 &> /dev/null check_fail $? "Failed to delete $name entry" @@ -230,6 +235,7 @@ cfg_test_port_common() check_err $? "$name entry with VLAN 20 not added when VLAN was not specified" bridge mdb del dev br0 port $swp1 $grp_key permanent + sleep "$SETTLE_DELAY" bridge mdb get dev br0 $grp_key vid 10 &> /dev/null check_fail $? "$name entry with VLAN 10 not deleted when VLAN was not specified" bridge mdb get dev br0 $grp_key vid 20 &> /dev/null @@ -310,6 +316,7 @@ __cfg_test_port_ip_star_g() bridge -d mdb get dev br0 grp $grp src $src1 vid 10 &> /dev/null check_err $? "(S, G) entry not created" bridge mdb del dev br0 port $swp1 grp $grp vid 10 + sleep "$SETTLE_DELAY" bridge -d mdb get dev br0 grp $grp vid 10 &> /dev/null check_fail $? "(*, G) entry not deleted" bridge -d mdb get dev br0 grp $grp src $src1 vid 10 &> /dev/null @@ -828,6 +835,7 @@ cfg_test_flush() bridge mdb add dev br0 port $swp1 grp 239.1.1.8 vid 10 temp bridge mdb flush dev br0 + sleep "$SETTLE_DELAY" num_entries=$(bridge mdb show dev br0 | wc -l) [[ $num_entries -eq 0 ]] check_err $? 0 "Not all entries flushed after flush all" @@ -840,6 +848,7 @@ cfg_test_flush() bridge mdb add dev br0 port br0 grp 239.1.1.1 vid 10 bridge mdb flush dev br0 port $swp1 + sleep "$SETTLE_DELAY" bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp1" check_fail $? "Entry not flushed by specified port" @@ -849,11 +858,13 @@ cfg_test_flush() check_err $? "Host entry flushed by wrong port" bridge mdb flush dev br0 port br0 + sleep "$SETTLE_DELAY" bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port br0" check_fail $? "Host entry not flushed by specified port" bridge mdb flush dev br0 + sleep "$SETTLE_DELAY" # Check that when flushing by VLAN ID only entries programmed with the # specified VLAN ID are flushed and the rest are not. @@ -864,6 +875,7 @@ cfg_test_flush() bridge mdb add dev br0 port $swp2 grp 239.1.1.1 vid 20 bridge mdb flush dev br0 vid 10 + sleep "$SETTLE_DELAY" bridge mdb get dev br0 grp 239.1.1.1 vid 10 &> /dev/null check_fail $? "Entry not flushed by specified VLAN ID" @@ -871,6 +883,7 @@ cfg_test_flush() check_err $? "Entry flushed by wrong VLAN ID" bridge mdb flush dev br0 + sleep "$SETTLE_DELAY" # Check that all permanent entries are flushed when "permanent" is # specified and that temporary entries are not. @@ -879,6 +892,7 @@ cfg_test_flush() bridge mdb add dev br0 port $swp2 grp 239.1.1.1 temp vid 10 bridge mdb flush dev br0 permanent + sleep "$SETTLE_DELAY" bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp1" check_fail $? "Entry not flushed by \"permanent\" state" @@ -886,6 +900,7 @@ cfg_test_flush() check_err $? "Entry flushed by wrong state (\"permanent\")" bridge mdb flush dev br0 + sleep "$SETTLE_DELAY" # Check that all temporary entries are flushed when "nopermanent" is # specified and that permanent entries are not. @@ -894,6 +909,7 @@ cfg_test_flush() bridge mdb add dev br0 port $swp2 grp 239.1.1.1 temp vid 10 bridge mdb flush dev br0 nopermanent + sleep "$SETTLE_DELAY" bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp1" check_err $? "Entry flushed by wrong state (\"nopermanent\")" @@ -901,6 +917,7 @@ cfg_test_flush() check_fail $? "Entry not flushed by \"nopermanent\" state" bridge mdb flush dev br0 + sleep "$SETTLE_DELAY" # Check that L2 host entries are not flushed when "nopermanent" is # specified, but flushed when "permanent" is specified. @@ -908,16 +925,19 @@ cfg_test_flush() bridge mdb add dev br0 port br0 grp 01:02:03:04:05:06 permanent vid 10 bridge mdb flush dev br0 nopermanent + sleep "$SETTLE_DELAY" bridge mdb get dev br0 grp 01:02:03:04:05:06 vid 10 &> /dev/null check_err $? "L2 host entry flushed by wrong state (\"nopermanent\")" bridge mdb flush dev br0 permanent + sleep "$SETTLE_DELAY" bridge mdb get dev br0 grp 01:02:03:04:05:06 vid 10 &> /dev/null check_fail $? "L2 host entry not flushed by \"permanent\" state" bridge mdb flush dev br0 + sleep "$SETTLE_DELAY" # Check that IPv4 host entries are not flushed when "permanent" is # specified, but flushed when "nopermanent" is specified. @@ -925,16 +945,19 @@ cfg_test_flush() bridge mdb add dev br0 port br0 grp 239.1.1.1 temp vid 10 bridge mdb flush dev br0 permanent + sleep "$SETTLE_DELAY" bridge mdb get dev br0 grp 239.1.1.1 vid 10 &> /dev/null check_err $? "IPv4 host entry flushed by wrong state (\"permanent\")" bridge mdb flush dev br0 nopermanent + sleep "$SETTLE_DELAY" bridge mdb get dev br0 grp 239.1.1.1 vid 10 &> /dev/null check_fail $? "IPv4 host entry not flushed by \"nopermanent\" state" bridge mdb flush dev br0 + sleep "$SETTLE_DELAY" # Check that IPv6 host entries are not flushed when "permanent" is # specified, but flushed when "nopermanent" is specified. @@ -942,16 +965,19 @@ cfg_test_flush() bridge mdb add dev br0 port br0 grp ff0e::1 temp vid 10 bridge mdb flush dev br0 permanent + sleep "$SETTLE_DELAY" bridge mdb get dev br0 grp ff0e::1 vid 10 &> /dev/null check_err $? "IPv6 host entry flushed by wrong state (\"permanent\")" bridge mdb flush dev br0 nopermanent + sleep "$SETTLE_DELAY" bridge mdb get dev br0 grp ff0e::1 vid 10 &> /dev/null check_fail $? "IPv6 host entry not flushed by \"nopermanent\" state" bridge mdb flush dev br0 + sleep "$SETTLE_DELAY" # Check that when flushing by routing protocol only entries programmed # with the specified routing protocol are flushed and the rest are not. @@ -961,6 +987,7 @@ cfg_test_flush() bridge mdb add dev br0 port br0 grp 239.1.1.1 vid 10 bridge mdb flush dev br0 proto bgp + sleep "$SETTLE_DELAY" bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp1" check_fail $? "Entry not flushed by specified routing protocol" @@ -970,20 +997,25 @@ cfg_test_flush() check_err $? "Host entry flushed by wrong routing protocol" bridge mdb flush dev br0 + sleep "$SETTLE_DELAY" # Test that an error is returned when trying to flush using unsupported # parameters. bridge mdb flush dev br0 src_vni 10 &> /dev/null + sleep "$SETTLE_DELAY" check_fail $? "Managed to flush by source VNI" bridge mdb flush dev br0 dst 198.51.100.1 &> /dev/null + sleep "$SETTLE_DELAY" check_fail $? "Managed to flush by destination IP" bridge mdb flush dev br0 dst_port 4789 &> /dev/null + sleep "$SETTLE_DELAY" check_fail $? "Managed to flush by UDP destination port" bridge mdb flush dev br0 vni 10 &> /dev/null + sleep "$SETTLE_DELAY" check_fail $? "Managed to flush by destination VNI" log_test "Flush tests" -- 2.39.2

9 months, 3 weeks

2
2
0 0

[PATCH HID v2 00/11] HID: bpf: add a new hook to control hid-generic

by Benjamin Tissoires

This is a slight change from the fundamentals of HID-BPF. In theory, HID-BPF is abstract to the kernel itself, and makes only changes at the HID level (through report descriptors or events emitted to/from the device). However, we have seen a few use cases where HID-BPF might interact with the running kernel when the target device is already handled by a specific device. For example, the XP-Pen/Huion/UC-Logic tablets are handled by hid-uclogic but this driver is also doing a report descriptor fixup without checking if the device has already been fixed by HID-BPF. In the same way, another recent example[0] was when a cheap foot pedal is used and tricks iPhones and Windows machines by presenting itself as a known Apple wireless keyboard. The problem is that this fake keyboard is not presenting a compatible report descriptor and hid-core merges all device nodes together making libinput ignore the keyboard part for historical reasons. Last, there has been a long standing request to allow to disable the input part of a given gamepad while SDL or Steam opens the device through hidraw. This series aims at tackling both of these problems: - first we had a new hook `hid_bpf_driver_probe` which allows the BPF program to decide if the curently probed driver should be used or not - then this same hook can also change the ->driver_data of the struct hid_device_id argument, and we teach hid-generic to use that field as the connect mask. Basically, it means that when we insert a BPF program to fix a device, we can force hid-generic to handle the device, and thus preventing any other kernel driver to tamper with our device. We can also selectively decide to export the hidraw or input nodes when using hid-generic. In the SDL/Steam use case, this would means that the gaming application will load one BPF program per input device it wants to open through hidraw, that BPF program reassigns the input device to hid-generic and disables hid-input, then it can open the new hidraw node. Once that program terminates, the BPF program is removed (either automatically because no-one has the fd of the links open, or manually by SDL/Steam), and the normal driver rebinds to the HID device, restoring full input functionality. This branch is on top of the for-6.12/hidraw and for-6.12/constify-rdesc branches of hid.git, mainly because those branch would conflict otherwise. [0] https://gitlab.freedesktop.org/libinput/libinput/-/issues/1014 Signed-off-by: Benjamin Tissoires <bentiss(a)kernel.org> --- Changes in v2: - Refactored the API to not use a new hook but hid_bpf_rdesc_fixup instead - Some cleanups in hid-core.c probe() device to not kmemdup multiple time the report descriptor when it's not required - I'm still not 100% sure the HID_QUIRK_IGNORE_HIDINPUT is that required, but I can not think of anything else at the moment to temporary disable any driver input device. - Link to v1: https://lore.kernel.org/r/20240903-hid-bpf-hid-generic-v1-0-9511a565b2da@ke… --- Benjamin Tissoires (11): HID: bpf: move HID-BPF report descriptor fixup earlier HID: core: save one kmemdup during .probe() HID: core: remove one more kmemdup on .probe() HID: bpf: allow write access to quirks field in struct hid_device selftests/hid: add dependency on hid_common.h selftests/hid: cleanup C tests by adding a common struct uhid_device selftests/hid: allow to parametrize bus/vid/pid/rdesc on the test device HID: add per device quirk to force bind to hid-generic selftests/hid: add test for assigning a given device to hid-generic HID: add quirk to prevent hid-input to be used selftests/hid: add test to disable hid-input drivers/hid/bpf/hid_bpf_dispatch.c | 8 +- drivers/hid/bpf/hid_bpf_struct_ops.c | 1 + drivers/hid/hid-core.c | 72 ++++++-- drivers/hid/hid-generic.c | 3 + include/linux/hid.h | 22 ++- include/linux/hid_bpf.h | 9 +- tools/testing/selftests/hid/Makefile | 2 +- tools/testing/selftests/hid/hid_bpf.c | 205 ++++++++++++++++----- tools/testing/selftests/hid/hid_common.h | 112 +++++++---- tools/testing/selftests/hid/hidraw.c | 36 +--- tools/testing/selftests/hid/progs/hid.c | 13 ++ .../testing/selftests/hid/progs/hid_bpf_helpers.h | 7 +- 12 files changed, 343 insertions(+), 147 deletions(-) --- base-commit: e1370d5de7b755600df050979e19fbcd625fb4c6 change-id: 20240829-hid-bpf-hid-generic-61579f5b5945 Best regards, -- Benjamin Tissoires <bentiss(a)kernel.org>

9 months, 3 weeks

2
16
0 0

[PATCH bpf-next/net v6 0/3] selftests/bpf: new MPTCP subflow subtest

by Matthieu Baerts (NGI0)

In this series from Geliang, modifying MPTCP BPF selftests, we have: - A new MPTCP subflow BPF program setting socket options per subflow: it looks better to have this old test program in the BPF selftests to track regressions and to serve as example. Note: Nicolas is no longer working at Tessares, but he did this work while working for them, and his email address is no longer available. - A new hook in the same BPF program to do the verification step. - A new MPTCP BPF subtest validating the new BPF program added in the first patch, with the help of the new hook added in the second patch. Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Changes in v6: - Patch 3/3: use usleep() instead of sleep() - Series: rebased on top of bpf-next/net - Link to v5: https://lore.kernel.org/r/20240910-upstream-bpf-next-20240506-mptcp-subflow… Changes in v5: - See the individual changelog for more details about them - Patch 1/3: set TCP on the 2nd subflow - Patch 2/3: new - Patch 3/3: use the BPF program from patch 2/3 to do the validation instead of using ss. - Series: rebased on top of bpf-next/net - Link to v4: https://lore.kernel.org/r/20240805-upstream-bpf-next-20240506-mptcp-subflow… Changes in v4: - Drop former patch 2/3: MPTCP's pm_nl_ctl requires a new header file: - I will check later if it is possible to avoid having duplicated header files in tools/include/uapi, but no need to block this series for that. Patch 2/3 can be added later if needed. - Patch 2/2: skip the test if 'ip mptcp' is not available. - Link to v3: https://lore.kernel.org/r/20240703-upstream-bpf-next-20240506-mptcp-subflow… Changes in v3: - Sorry for the delay between v2 and v3, this series was conflicting with the "add netns helpers", but it looks like it is on hold: https://lore.kernel.org/cover.1715821541.git.tanggeliang@kylinos.cn - Patch 1/3 includes "bpf_tracing_net.h", introduced in between. - New patch 2/3: "selftests/bpf: Add mptcp pm_nl_ctl link". - Patch 3/3: use the tool introduced in patch 2/3 + SYS_NOFAIL() helper. - Link to v2: https://lore.kernel.org/r/20240509-upstream-bpf-next-20240506-mptcp-subflow… Changes in v2: - Previous patches 1/4 and 2/4 have been dropped from this series: - 1/4: "selftests/bpf: Handle SIGINT when creating netns": - A new version, more generic and no longer specific to MPTCP BPF selftest will be sent later, as part of a new series. (Alexei) - 2/4: "selftests/bpf: Add RUN_MPTCP_TEST macro": - Removed, not to hide helper functions in macros. (Alexei) - The commit message of patch 1/2 has been clarified to avoid some possible confusions spot by Alexei. - Link to v1: https://lore.kernel.org/r/20240507-upstream-bpf-next-20240506-mptcp-subflow… --- Geliang Tang (2): selftests/bpf: Add getsockopt to inspect mptcp subflow selftests/bpf: Add mptcp subflow subtest Nicolas Rybowski (1): selftests/bpf: Add mptcp subflow example MAINTAINERS | 2 +- tools/testing/selftests/bpf/prog_tests/mptcp.c | 127 +++++++++++++++++++++ tools/testing/selftests/bpf/progs/mptcp_bpf.h | 42 +++++++ tools/testing/selftests/bpf/progs/mptcp_subflow.c | 128 ++++++++++++++++++++++ 4 files changed, 298 insertions(+), 1 deletion(-) --- base-commit: 23dc9867329c72b48e5039ac93fbf50d9099cdb3 change-id: 20240506-upstream-bpf-next-20240506-mptcp-subflow-test-faef6654bfa3 Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

9 months, 3 weeks

2
5
0 0

[PATCH bpf-next] bpf: ringbuf: Support consuming BPF_MAP_TYPE_RINGBUF from prog

by Daniel Xu

Right now there exists prog produce / userspace consume and userspace produce / prog consume support. But it is also useful to have prog produce / prog consume. For example, we want to track the latency overhead of cpumap in production. Since we need to store enqueue timestamps somewhere and cpumap is MPSC, we need an MPSC data structure to shadow cpumap. BPF ringbuf is such a data structure. Rather than reimplement (possibly poorly) a custom ringbuffer in BPF, extend the existing interface to allow the final quadrant of ringbuf usecases to be filled. Note we ignore userspace to userspace use case - there is no need to involve kernel for that. Signed-off-by: Daniel Xu <dxu(a)dxuuu.xyz> --- kernel/bpf/verifier.c | 6 +- tools/testing/selftests/bpf/Makefile | 3 +- .../selftests/bpf/prog_tests/ringbuf.c | 50 +++++++++++++++ .../bpf/progs/test_ringbuf_bpf_to_bpf.c | 64 +++++++++++++++++++ 4 files changed, 120 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/bpf/progs/test_ringbuf_bpf_to_bpf.c diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 53d0556fbbf3..56bfe559f228 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -9142,7 +9142,8 @@ static int check_map_func_compatibility(struct bpf_verifier_env *env, func_id != BPF_FUNC_ringbuf_query && func_id != BPF_FUNC_ringbuf_reserve_dynptr && func_id != BPF_FUNC_ringbuf_submit_dynptr && - func_id != BPF_FUNC_ringbuf_discard_dynptr) + func_id != BPF_FUNC_ringbuf_discard_dynptr && + func_id != BPF_FUNC_user_ringbuf_drain) goto error; break; case BPF_MAP_TYPE_USER_RINGBUF: @@ -9276,7 +9277,8 @@ static int check_map_func_compatibility(struct bpf_verifier_env *env, goto error; break; case BPF_FUNC_user_ringbuf_drain: - if (map->map_type != BPF_MAP_TYPE_USER_RINGBUF) + if (map->map_type != BPF_MAP_TYPE_USER_RINGBUF && + map->map_type != BPF_MAP_TYPE_RINGBUF) goto error; break; case BPF_FUNC_get_stackid: diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 9905e3739dd0..233109843d4d 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -503,7 +503,8 @@ LINKED_SKELS := test_static_linked.skel.h linked_funcs.skel.h \ LSKELS := fentry_test.c fexit_test.c fexit_sleep.c atomics.c \ trace_printk.c trace_vprintk.c map_ptr_kern.c \ core_kern.c core_kern_overflow.c test_ringbuf.c \ - test_ringbuf_n.c test_ringbuf_map_key.c test_ringbuf_write.c + test_ringbuf_n.c test_ringbuf_map_key.c test_ringbuf_write.c \ + test_ringbuf_bpf_to_bpf.c # Generate both light skeleton and libbpf skeleton for these LSKELS_EXTRA := test_ksyms_module.c test_ksyms_weak.c kfunc_call_test.c \ diff --git a/tools/testing/selftests/bpf/prog_tests/ringbuf.c b/tools/testing/selftests/bpf/prog_tests/ringbuf.c index da430df45aa4..3e7955573ac5 100644 --- a/tools/testing/selftests/bpf/prog_tests/ringbuf.c +++ b/tools/testing/selftests/bpf/prog_tests/ringbuf.c @@ -17,6 +17,7 @@ #include "test_ringbuf_n.lskel.h" #include "test_ringbuf_map_key.lskel.h" #include "test_ringbuf_write.lskel.h" +#include "test_ringbuf_bpf_to_bpf.lskel.h" #define EDONE 7777 @@ -497,6 +498,53 @@ static void ringbuf_map_key_subtest(void) test_ringbuf_map_key_lskel__destroy(skel_map_key); } +static void ringbuf_bpf_to_bpf_subtest(void) +{ + struct test_ringbuf_bpf_to_bpf_lskel *skel; + int err, i; + + skel = test_ringbuf_bpf_to_bpf_lskel__open(); + if (!ASSERT_OK_PTR(skel, "test_ringbuf_bpf_to_bpf_lskel__open")) + return; + + skel->maps.ringbuf.max_entries = getpagesize(); + skel->bss->pid = getpid(); + + err = test_ringbuf_bpf_to_bpf_lskel__load(skel); + if (!ASSERT_OK(err, "test_ringbuf_bpf_to_bpf_lskel__load")) + goto cleanup; + + ringbuf = ring_buffer__new(skel->maps.ringbuf.map_fd, NULL, NULL, NULL); + if (!ASSERT_OK_PTR(ringbuf, "ring_buffer__new")) + goto cleanup; + + err = test_ringbuf_bpf_to_bpf_lskel__attach(skel); + if (!ASSERT_OK(err, "test_ringbuf_bpf_to_bpf_lskel__attach")) + goto cleanup_ringbuf; + + /* Produce N_SAMPLES samples in the ring buffer by calling getpid() */ + skel->bss->value = SAMPLE_VALUE; + for (i = 0; i < N_SAMPLES; i++) + syscall(__NR_getpgid); + + /* Trigger bpf-side consumption */ + syscall(__NR_prctl); + + /* Check correct number samples were consumed */ + if (!ASSERT_EQ(skel->bss->round_tripped, N_SAMPLES, "round_tripped")) + goto cleanup_ringbuf; + + /* Check all samples were consumed */ + err = ring_buffer__consume(ringbuf); + if (!ASSERT_EQ(err, 0, "rb_consume")) + goto cleanup_ringbuf; + +cleanup_ringbuf: + ring_buffer__free(ringbuf); +cleanup: + test_ringbuf_bpf_to_bpf_lskel__destroy(skel); +} + void test_ringbuf(void) { if (test__start_subtest("ringbuf")) @@ -507,4 +555,6 @@ void test_ringbuf(void) ringbuf_map_key_subtest(); if (test__start_subtest("ringbuf_write")) ringbuf_write_subtest(); + if (test__start_subtest("ringbuf_bpf_to_bpf")) + ringbuf_bpf_to_bpf_subtest(); } diff --git a/tools/testing/selftests/bpf/progs/test_ringbuf_bpf_to_bpf.c b/tools/testing/selftests/bpf/progs/test_ringbuf_bpf_to_bpf.c new file mode 100644 index 000000000000..378154922024 --- /dev/null +++ b/tools/testing/selftests/bpf/progs/test_ringbuf_bpf_to_bpf.c @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/bpf.h> +#include <unistd.h> +#include <bpf/bpf_helpers.h> +#include "bpf_misc.h" + +struct sample { + long value; +}; + +struct { + __uint(type, BPF_MAP_TYPE_RINGBUF); +} ringbuf SEC(".maps"); + +int pid = 0; +long value = 0; +int round_tripped = 0; + +SEC("fentry/" SYS_PREFIX "sys_getpgid") +int test_ringbuf_bpf_to_bpf_produce(void *ctx) +{ + int cur_pid = bpf_get_current_pid_tgid() >> 32; + struct sample *sample; + + if (cur_pid != pid) + return 0; + + sample = bpf_ringbuf_reserve(&ringbuf, sizeof(*sample), 0); + if (!sample) + return 0; + sample->value = value; + + bpf_ringbuf_submit(sample, 0); + return 0; +} + +static long consume_cb(struct bpf_dynptr *dynptr, void *context) +{ + struct sample *sample = NULL; + + sample = bpf_dynptr_data(dynptr, 0, sizeof(*sample)); + if (!sample) + return 0; + + if (sample->value == value) + round_tripped++; + + return 0; +} + +SEC("fentry/" SYS_PREFIX "sys_prctl") +int test_ringbuf_bpf_to_bpf_consume(void *ctx) +{ + int cur_pid = bpf_get_current_pid_tgid() >> 32; + + if (cur_pid != pid) + return 0; + + bpf_user_ringbuf_drain(&ringbuf, consume_cb, NULL, 0); + return 0; +} + +char _license[] SEC("license") = "GPL"; -- 2.46.0

9 months, 3 weeks

4
16
0 0

[PATCH] selftest/mm: Do not use hint for riscv mmap

by Chunyan Zhang

When the virtual address range selftest is run on RISC-V platforms, it is observed that using the hint address when calling mmap cannot get the address in the range of that validate_addr() checks, also that will cause '/proc/self/maps' have gaps larger than MAP_CHUNK_SIZE. Signed-off-by: Chunyan Zhang <zhangchunyan(a)iscas.ac.cn> --- tools/testing/selftests/mm/virtual_address_range.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/tools/testing/selftests/mm/virtual_address_range.c b/tools/testing/selftests/mm/virtual_address_range.c index 4e4c1e311247..25f3eb304999 100644 --- a/tools/testing/selftests/mm/virtual_address_range.c +++ b/tools/testing/selftests/mm/virtual_address_range.c @@ -64,6 +64,14 @@ #define NR_CHUNKS_HIGH NR_CHUNKS_384TB #endif +#if defined(__riscv) && (__riscv_xlen == 64) +static char *hind_addr(void) +{ + return NULL; +} + +static void validate_addr(char *ptr, int high_addr) { } +#else static char *hind_addr(void) { int bits = HIGH_ADDR_SHIFT + rand() % (63 - HIGH_ADDR_SHIFT); @@ -81,6 +89,7 @@ static void validate_addr(char *ptr, int high_addr) if (addr > HIGH_ADDR_MARK) ksft_exit_fail_msg("Bad address %lx\n", addr); } +#endif static int validate_lower_address_hint(void) { -- 2.34.1

9 months, 3 weeks

3
2
0 0

[PATCH] kunit: tool: Build compile_commands.json

by Brendan Jackman

compile_commands.json is used by clangd[1] to provide code navigation and completion functionality to editors. See [2] for an example configuration that includes this functionality for VSCode. It can currently be built manually when using kunit.py, by running: ./scripts/clang-tools/gen_compile_commands.py -d .kunit With this change however, it's built automatically so you don't need to manually keep it up to date. Unlike the manual approach, having make build the compile_commands.json means that it appears in the build output tree instead of at the root of the source tree, so you'll need to add --compile-commands-dir= to your clangd args for it to be found. [1] https://clangd.llvm.org/ [2] https://github.com/FlorentRevest/linux-kernel-vscode Signed-off-by: Brendan Jackman <jackmanb(a)google.com> --- tools/testing/kunit/kunit_kernel.py | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index 7254c110ff23..61931c4926fd 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -72,7 +72,8 @@ class LinuxSourceTreeOperations: raise ConfigError(e.output.decode()) def make(self, jobs: int, build_dir: str, make_options: Optional[List[str]]) -> None: - command = ['make', 'ARCH=' + self._linux_arch, 'O=' + build_dir, '--jobs=' + str(jobs)] + command = ['make', 'all', 'compile_commands.json', 'ARCH=' + self._linux_arch, + 'O=' + build_dir, '--jobs=' + str(jobs)] if make_options: command.extend(make_options) if self._cross_compile: --- base-commit: 3c999d1ae3c75991902a1a7dad0cb62c2a3008b4 change-id: 20240516-kunit-compile-commands-d994074fc2be Best regards, -- Brendan Jackman <jackmanb(a)google.com>

9 months, 3 weeks

3
2
0 0

[PATCH v5] lib/math: Add int_pow test suite

by Luis Felipe Hernandez

Adds test suite for integer based power function. Signed-off-by: Luis Felipe Hernandez <luis.hernandez093(a)gmail.com> --- Changes in v5: - Fix kernel test bot warning - Rebase with latest Changes in v4: - Address checkpatch warning and make kconfig description longer - Use GPL-2.0-only for consistency - Spelling fix fith -> fifth Changes in v3: - Fix compiler warning: explicitly define constant as unsigned int - Add changes in patch revisions Changes in v2: - Address review feedback - Add kconfig entry - Use correct dir and file convention for KUnit - Fix typo - Remove unused static_stub header - Refactor test suite to use paramerterized test cases - Add close to max allowable value to in large_result test case - Add test case with non-power of two exponent - Fix module license --- lib/Kconfig.debug | 16 +++++++++++ lib/math/Makefile | 1 + lib/math/tests/Makefile | 3 ++ lib/math/tests/int_pow_kunit.c | 52 ++++++++++++++++++++++++++++++++++ 4 files changed, 72 insertions(+) create mode 100644 lib/math/tests/Makefile create mode 100644 lib/math/tests/int_pow_kunit.c diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index a30c03a66172..c415f8ca43a7 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -3051,3 +3051,19 @@ config RUST_KERNEL_DOCTESTS endmenu # "Rust" endmenu # Kernel hacking + +config INT_POW_TEST + tristate "Integer exponentiation (int_pow) test" if !KUNIT_ALL_TESTS + depends on KUNIT + default KUNIT_ALL_TESTS + help + This option enables the KUnit test suite for the int_pow function, + which performs integer exponentiation. The test suite is designed to + verify that the implementation of int_pow correctly computes the power + of a given base raised to a given exponent. + + Enabling this option will include tests that check various scenarios + and edge cases to ensure the accuracy and reliability of the exponentiation + function. + + If unsure, say N diff --git a/lib/math/Makefile b/lib/math/Makefile index 91fcdb0c9efe..3c1f92a7459d 100644 --- a/lib/math/Makefile +++ b/lib/math/Makefile @@ -5,5 +5,6 @@ obj-$(CONFIG_CORDIC) += cordic.o obj-$(CONFIG_PRIME_NUMBERS) += prime_numbers.o obj-$(CONFIG_RATIONAL) += rational.o +obj-$(CONFIG_INT_POW_TEST) += tests/int_pow_kunit.o obj-$(CONFIG_TEST_DIV64) += test_div64.o obj-$(CONFIG_RATIONAL_KUNIT_TEST) += rational-test.o diff --git a/lib/math/tests/Makefile b/lib/math/tests/Makefile new file mode 100644 index 000000000000..6a169123320a --- /dev/null +++ b/lib/math/tests/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only + +obj-$(CONFIG_INT_POW_TEST) += int_pow_kunit.o diff --git a/lib/math/tests/int_pow_kunit.c b/lib/math/tests/int_pow_kunit.c new file mode 100644 index 000000000000..34b33677d458 --- /dev/null +++ b/lib/math/tests/int_pow_kunit.c @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include <kunit/test.h> +#include <linux/math.h> + +struct test_case_params { + u64 base; + unsigned int exponent; + u64 expected_result; + const char *name; +}; + +static const struct test_case_params params[] = { + { 64, 0, 1, "Power of zero" }, + { 64, 1, 64, "Power of one"}, + { 0, 5, 0, "Base zero" }, + { 1, 64, 1, "Base one" }, + { 2, 2, 4, "Two squared"}, + { 2, 3, 8, "Two cubed"}, + { 5, 5, 3125, "Five raised to the fifth power" }, + { U64_MAX, 1, U64_MAX, "Max base" }, + { 2, 63, 9223372036854775808ULL, "Large result"}, +}; + +static void get_desc(const struct test_case_params *tc, char *desc) +{ + strscpy(desc, tc->name, KUNIT_PARAM_DESC_SIZE); +} + +KUNIT_ARRAY_PARAM(int_pow, params, get_desc); + +static void int_pow_test(struct kunit *test) +{ + const struct test_case_params *tc = (const struct test_case_params *)test->param_value; + + KUNIT_EXPECT_EQ(test, tc->expected_result, int_pow(tc->base, tc->exponent)); +} + +static struct kunit_case math_int_pow_test_cases[] = { + KUNIT_CASE_PARAM(int_pow_test, int_pow_gen_params), + {} +}; + +static struct kunit_suite int_pow_test_suite = { + .name = "math-int_pow", + .test_cases = math_int_pow_test_cases, +}; + +kunit_test_suites(&int_pow_test_suite); + +MODULE_DESCRIPTION("math.int_pow KUnit test suite"); +MODULE_LICENSE("GPL"); -- 2.46.0

9 months, 3 weeks

3
2
0 0

[PATCH v2 0/3] selftests: kvm: s390: Add ucontrol memory selftests

by Christoph Schlameuss

This patch series adds a some not yet picked selftests to the kvm s390x selftest suite. The additional test cases are covering: * Assert KVM_EXIT_S390_UCONTROL exit on not mapped memory access * Assert functionality of storage keys in ucontrol VM * Assert that memory region operations are rejected for ucontrol VMs Running the test cases requires sys_admin capabilities to start the ucontrol VM. This can be achieved by running as root or with a command like: sudo setpriv --reuid nobody --inh-caps -all,+sys_admin \ --ambient-caps -all,+sys_admin --bounding-set -all,+sys_admin \ ./ucontrol_test --- The patches in this series have been part of the previous patch series. The test cases added here do depend on the fixture added in the earlier patches. From v5 PATCH 7-9 the segment and page table generation has been removed and DAT has been disabled. Since DAT is not necessary to validate the KVM code. https://lore.kernel.org/kvm/20240807154512.316936-1-schlameuss@linux.ibm.co… v2: - Reenable KSS intercept and handle it within skey test. - Modify the checked register between storing (sske) and reading (iske) it within the test program to make sure the. - Add an additional state assertion in the end of uc_skey - Fix some typos and white spaces. v1: - Remove segment and page table generation and disable DAT. This is not necessary to validate the KVM code. Christoph Schlameuss (3): selftests: kvm: s390: Add uc_map_unmap VM test case selftests: kvm: s390: Add uc_skey VM test case selftests: kvm: s390: Verify reject memory region operations for ucontrol VMs .../selftests/kvm/s390x/ucontrol_test.c | 232 +++++++++++++++++- 1 file changed, 230 insertions(+), 2 deletions(-) -- 2.46.0

9 months, 3 weeks

2
6
0 0

[PATCH v2] selftest/powerpc/benchmark: remove requirement libc-dev

by Madhavan Srinivasan

Currently exec-target.c file is linked as static and this post a requirement to install libc dev package to build. Without it, build-break when compiling selftest/powerpc/benchmark. CC exec_target /usr/bin/ld: cannot find -lc: No such file or directory collect2: error: ld returned 1 exit status exec_target.c is using "syscall" library function which could be replaced with a inline assembly and the same is proposed as a fix here. Suggested-by: Michael Ellerman <mpe(a)ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy(a)linux.ibm.com> --- Chnagelog v1: - Add comment for clobber register and proper list of clobber registers as suggested by Michael Ellerman and Christophe Leroy .../selftests/powerpc/benchmarks/Makefile | 2 +- .../selftests/powerpc/benchmarks/exec_target.c | 16 ++++++++++++++-- 2 files changed, 15 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/powerpc/benchmarks/Makefile b/tools/testing/selftests/powerpc/benchmarks/Makefile index 1321922038d0..ca4483c238b9 100644 --- a/tools/testing/selftests/powerpc/benchmarks/Makefile +++ b/tools/testing/selftests/powerpc/benchmarks/Makefile @@ -18,4 +18,4 @@ $(OUTPUT)/context_switch: LDLIBS += -lpthread $(OUTPUT)/fork: LDLIBS += -lpthread -$(OUTPUT)/exec_target: CFLAGS += -static -nostartfiles +$(OUTPUT)/exec_target: CFLAGS += -nostartfiles diff --git a/tools/testing/selftests/powerpc/benchmarks/exec_target.c b/tools/testing/selftests/powerpc/benchmarks/exec_target.c index c14b0fc1edde..a6408d3f26cd 100644 --- a/tools/testing/selftests/powerpc/benchmarks/exec_target.c +++ b/tools/testing/selftests/powerpc/benchmarks/exec_target.c @@ -7,10 +7,22 @@ */ #define _GNU_SOURCE -#include <unistd.h> #include <sys/syscall.h> void _start(void) { - syscall(SYS_exit, 0); + asm volatile ( + "li %%r0, %[sys_exit];" + "li %%r3, 0;" + "sc;" + : + : [sys_exit] "i" (SYS_exit) + /* + * "sc" will clobber r0, r3-r13, cr0, ctr, xer and memory. + * Even though sys_exit never returns, handle clobber + * registers. + */ + : "r0", "r3", "r4", "r5", "r6", "r7", "r8", "r9", "r10", + "r11", "r12", "r13", "cr0", "ctr", "xer", "memory" + ); } -- 2.45.2

9 months, 3 weeks

3
2
0 0

[PATCH RESEND v2 00/19] random: Resolve circular include dependency and include <linux/percpu.h>

by Uros Bizjak

Resent due to missing linux-kernel@ mailing list inclusion. There were several attempts to resolve circular include dependency after the addition of percpu.h: 1c9df907da83 ("random: fix circular include dependency on arm64 after addition of percpu.h"), c0842fbc1b18 ("random32: move the pseudo-random 32-bit definitions to prandom.h") and finally d9f29deb7fe8 ("prandom: Remove unused include") that completely removes the inclusion of <linux/percpu.h>. Due to legacy reasons, <linux/random.h> includes <linux/prandom.h>, but with the commit entry remark: --quote-- A further cleanup step would be to remove this from <linux/random.h> entirely, and make people who use the prandom infrastructure include just the new header file. That's a bit of a churn patch, but grepping for "prandom_" and "next_pseudo_random32" "struct rnd_state" should catch most users. But it turns out that that nice cleanup step is fairly painful, because a _lot_ of code currently seems to depend on the implicit include of <linux/random.h>, which can currently come in a lot of ways, including such fairly core headfers as <linux/net.h>. So the "nice cleanup" part may or may never happen. --/quote-- We would like to include <linux/percpu.h> in <linux/prandom.h>. In [1] we would like to repurpose __percpu tag as a named address space qualifier, where __percpu macro uses defines from <linux/percpu.h>. The major roadblock to inclusion of <linux/percpu.h> is the above mentioned legacy inclusion of <linux/prandom.h> in <linux/random.h> that causes circular include dependency that prevents <linux/percpu.h> inclusion. This patch series is the "nice cleanup" part that: a) Substitutes the inclusion of <linux/random.h> with the inclusion of <linux/prandom.h> where needed (patches 1 - 17). b) Removes legacy inclusion of <linux/prandom.h> from <linux/random.h> (patch 18). c) Includes <linux/percpu.h> in <linux/prandom.h> (patch 19). The whole series was tested by compiling the kernel for x86_64 allconfig and some popular architectures, namely arm64 defconfig, powerpc defconfig and loongarch defconfig. [1] https://lore.kernel.org/lkml/20240812115945.484051-4-ubizjak@gmail.com/ Cc: Dave Hansen <dave.hansen(a)linux.intel.com> Cc: Andy Lutomirski <luto(a)kernel.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Ingo Molnar <mingo(a)redhat.com> Cc: Borislav Petkov <bp(a)alien8.de> Cc: x86(a)kernel.org Cc: "H. Peter Anvin" <hpa(a)zytor.com> Cc: Jani Nikula <jani.nikula(a)linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen(a)linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi(a)intel.com> Cc: Tvrtko Ursulin <tursulin(a)ursulin.net> Cc: David Airlie <airlied(a)gmail.com> Cc: Daniel Vetter <daniel(a)ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst(a)linux.intel.com> Cc: Maxime Ripard <mripard(a)kernel.org> Cc: Thomas Zimmermann <tzimmermann(a)suse.de> Cc: Hans Verkuil <hverkuil(a)xs4all.nl> Cc: Mauro Carvalho Chehab <mchehab(a)kernel.org> Cc: Miquel Raynal <miquel.raynal(a)bootlin.com> Cc: Richard Weinberger <richard(a)nod.at> Cc: Vignesh Raghavendra <vigneshr(a)ti.com> Cc: Eric Biggers <ebiggers(a)kernel.org> Cc: "Theodore Y. Ts'o" <tytso(a)mit.edu> Cc: Jaegeuk Kim <jaegeuk(a)kernel.org> Cc: "Jason A. Donenfeld" <Jason(a)zx2c4.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Hannes Reinecke <hare(a)suse.de> Cc: "James E.J. Bottomley" <James.Bottomley(a)HansenPartnership.com> Cc: "Martin K. Petersen" <martin.petersen(a)oracle.com> Cc: Alexei Starovoitov <ast(a)kernel.org> Cc: Daniel Borkmann <daniel(a)iogearbox.net> Cc: John Fastabend <john.fastabend(a)gmail.com> Cc: Andrii Nakryiko <andrii(a)kernel.org> Cc: Martin KaFai Lau <martin.lau(a)linux.dev> Cc: Eduard Zingerman <eddyz87(a)gmail.com> Cc: Song Liu <song(a)kernel.org> Cc: Yonghong Song <yonghong.song(a)linux.dev> Cc: KP Singh <kpsingh(a)kernel.org> Cc: Stanislav Fomichev <sdf(a)fomichev.me> Cc: Hao Luo <haoluo(a)google.com> Cc: Jiri Olsa <jolsa(a)kernel.org> Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: Brendan Higgins <brendan.higgins(a)linux.dev> Cc: David Gow <davidgow(a)google.com> Cc: Rae Moar <rmoar(a)google.com> Cc: "David S. Miller" <davem(a)davemloft.net> Cc: Eric Dumazet <edumazet(a)google.com> Cc: Jakub Kicinski <kuba(a)kernel.org> Cc: Paolo Abeni <pabeni(a)redhat.com> Cc: Jiri Pirko <jiri(a)resnulli.us> Cc: Petr Mladek <pmladek(a)suse.com> Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Cc: Rasmus Villemoes <linux(a)rasmusvillemoes.dk> Cc: Sergey Senozhatsky <senozhatsky(a)chromium.org> Cc: Stephen Hemminger <stephen(a)networkplumber.org> Cc: Jamal Hadi Salim <jhs(a)mojatatu.com> Cc: Cong Wang <xiyou.wangcong(a)gmail.com> Cc: Kent Overstreet <kent.overstreet(a)linux.dev> --- v2: - Reword commit messages to mention the removal of legacy inclusion of <linux/prandom.h> from <linux/random.h> - Add missing substitution in crypto/testmgr.c (reported by kernel test robot) - Add Acked-by:. Uros Bizjak (19): x86/kaslr: Include <linux/prandom.h> instead of <linux/random.h> crypto: testmgr: Include <linux/prandom.h> instead of <linux/random.h> drm/i915/selftests: Include <linux/prandom.h> instead of <linux/random.h> drm/lib: Include <linux/prandom.h> instead of <linux/random.h> media: vivid: Include <linux/prandom.h> in vivid-vid-cap.c mtd: tests: Include <linux/prandom.h> instead of <linux/random.h> fscrypt: Include <linux/once.h> in fs/crypto/keyring.c scsi: libfcoe: Include <linux/prandom.h> instead of <linux/random.h> bpf: Include <linux/prandom.h> instead of <linux/random.h> lib/interval_tree_test.c: Include <linux/prandom.h> instead of <linux/random.h> kunit: string-stream-test: Include <linux/prandom.h> instead of <linux/random.h> random32: Include <linux/prandom.h> instead of <linux/random.h> lib/rbtree-test: Include <linux/prandom.h> instead of <linux/random.h> bpf/tests: Include <linux/prandom.h> instead of <linux/random.h> lib/test_parman: Include <linux/prandom.h> instead of <linux/random.h> lib/test_scanf: Include <linux/prandom.h> instead of <linux/random.h> netem: Include <linux/prandom.h> in sch_netem.c random: Do not include <linux/prandom.h> in <linux/random.h> prandom: Include <linux/percpu.h> in <linux/prandom.h> arch/x86/mm/kaslr.c | 2 +- crypto/testmgr.c | 2 +- drivers/gpu/drm/i915/selftests/i915_gem.c | 2 +- drivers/gpu/drm/i915/selftests/i915_random.h | 2 +- drivers/gpu/drm/i915/selftests/scatterlist.c | 2 +- drivers/gpu/drm/lib/drm_random.h | 2 +- drivers/media/test-drivers/vivid/vivid-vid-cap.c | 1 + drivers/mtd/tests/oobtest.c | 2 +- drivers/mtd/tests/pagetest.c | 2 +- drivers/mtd/tests/subpagetest.c | 2 +- fs/crypto/keyring.c | 1 + include/linux/prandom.h | 1 + include/linux/random.h | 7 ------- include/scsi/libfcoe.h | 2 +- kernel/bpf/core.c | 2 +- lib/interval_tree_test.c | 2 +- lib/kunit/string-stream-test.c | 1 + lib/random32.c | 2 +- lib/rbtree_test.c | 2 +- lib/test_bpf.c | 2 +- lib/test_parman.c | 2 +- lib/test_scanf.c | 2 +- net/sched/sch_netem.c | 1 + 23 files changed, 22 insertions(+), 24 deletions(-) -- 2.46.0

9 months, 3 weeks

8
28
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror