- Linux-kselftest-mirror - lists.linaro.org

[PATCH v3 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest

by Manivannan Sadhasivam

Hi, This series carries forward the effort to add Kselftest for PCI Endpoint Subsystem started by Aman Gupta [1] a while ago. I reworked the initial version based on another patch that fixes the return values of IOCTLs in pci_endpoint_test driver and did many cleanups. Since the resulting work modified the initial version substantially, I took over the authorship. This series also incorporates the review comment by Shuah Khan [2] to move the existing tests from 'tools/pci' to 'tools/testing/kselftest/pci_endpoint' before migrating to Kselftest framework. I made sure that the tests are executable in each commit and updated documentation accordingly. NOTE: Patch 1 is strictly not related to this series, but necessary to execute Kselftests with Qualcomm Endpoint devices. So this can be merged separately. - Mani [1] https://lore.kernel.org/linux-pci/20221007053934.5188-1-aman1.gupta@samsung… [2] https://lore.kernel.org/linux-pci/b2a5db97-dc59-33ab-71cd-f591e0b1b34d@linu… Changes in v3: * Collected tags. * Added a note about failing testcase 10 and command to skip it in documentation. * Removed Aman Gupta and Padmanabhan Rajanbabu from CC as their addresses are bouncing. Changes in v2: * Added a patch that fixes return values of IOCTL in pci_endpoint_test driver * Moved the existing tests to new location before migrating * Added a fix for BARs on Qcom devices * Updated documentation and also added fixture variants for memcpy & DMA modes Manivannan Sadhasivam (4): PCI: qcom-ep: Mark BAR0/BAR2 as 64bit BARs and BAR1/BAR3 as RESERVED misc: pci_endpoint_test: Fix the return value of IOCTL selftests: Move PCI Endpoint tests from tools/pci to Kselftests selftests: pci_endpoint: Migrate to Kselftest framework Documentation/PCI/endpoint/pci-test-howto.rst | 152 ++++------- MAINTAINERS | 2 +- drivers/misc/pci_endpoint_test.c | 236 ++++++++--------- drivers/pci/controller/dwc/pcie-qcom-ep.c | 4 + tools/pci/Build | 1 - tools/pci/Makefile | 58 ---- tools/pci/pcitest.c | 250 ------------------ tools/pci/pcitest.sh | 72 ----- tools/testing/selftests/Makefile | 1 + .../testing/selftests/pci_endpoint/.gitignore | 2 + tools/testing/selftests/pci_endpoint/Makefile | 7 + tools/testing/selftests/pci_endpoint/config | 4 + .../pci_endpoint/pci_endpoint_test.c | 186 +++++++++++++ 13 files changed, 373 insertions(+), 602 deletions(-) delete mode 100644 tools/pci/Build delete mode 100644 tools/pci/Makefile delete mode 100644 tools/pci/pcitest.c delete mode 100644 tools/pci/pcitest.sh create mode 100644 tools/testing/selftests/pci_endpoint/.gitignore create mode 100644 tools/testing/selftests/pci_endpoint/Makefile create mode 100644 tools/testing/selftests/pci_endpoint/config create mode 100644 tools/testing/selftests/pci_endpoint/pci_endpoint_test.c -- 2.25.1

9 months

4
13
0 0

[PATCH v3 0/9] arm64: Support 2024 dpISA extensions

by Mark Brown

The 2024 architecture release includes a number of data processing extensions, mostly SVE and SME additions with a few others. These are all very straightforward extensions which add instructions but no architectural state so only need hwcaps and exposing of the ID registers to KVM guests and userspace. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Changes in v3: - Commit log update for the hwcap test. - Link to v2: https://lore.kernel.org/r/20241030-arm64-2024-dpisa-v2-0-b6601a15d2a5@kerne… Changes in v2: - Filter KVM guest visible bitfields in ID_AA64ISAR3_EL1 to only those we make writeable. - Link to v1: https://lore.kernel.org/r/20241028-arm64-2024-dpisa-v1-0-a38d08b008a8@kerne… --- Mark Brown (9): arm64/sysreg: Update ID_AA64PFR2_EL1 to DDI0601 2024-09 arm64/sysreg: Update ID_AA64ISAR3_EL1 to DDI0601 2024-09 arm64/sysreg: Update ID_AA64FPFR0_EL1 to DDI0601 2024-09 arm64/sysreg: Update ID_AA64ZFR0_EL1 to DDI0601 2024-09 arm64/sysreg: Update ID_AA64SMFR0_EL1 to DDI0601 2024-09 arm64/sysreg: Update ID_AA64ISAR2_EL1 to DDI0601 2024-09 arm64/hwcap: Describe 2024 dpISA extensions to userspace KVM: arm64: Allow control of dpISA extensions in ID_AA64ISAR3_EL1 kselftest/arm64: Add 2024 dpISA extensions to hwcap test Documentation/arch/arm64/elf_hwcaps.rst | 51 ++++++ arch/arm64/include/asm/hwcap.h | 17 ++ arch/arm64/include/uapi/asm/hwcap.h | 17 ++ arch/arm64/kernel/cpufeature.c | 35 ++++ arch/arm64/kernel/cpuinfo.c | 17 ++ arch/arm64/kvm/sys_regs.c | 6 +- arch/arm64/tools/sysreg | 87 +++++++++- tools/testing/selftests/arm64/abi/hwcap.c | 273 +++++++++++++++++++++++++++++- 8 files changed, 493 insertions(+), 10 deletions(-) --- base-commit: 40384c840ea1944d7c5a392e8975ed088ecf0b37 change-id: 20241008-arm64-2024-dpisa-8091074a7f48 Best regards, -- Mark Brown <broonie(a)kernel.org>

9 months

2
17
0 0

[PATCH v2 0/6] selftests: kvm: s390: Reject invalid ioctls on ucontrol VMs

by Christoph Schlameuss

This patch series adds more test case issuing ioctls to ucontrol VMs and its floating interrupt controller. The test cases trigger three possible null pointer dereferences within the handling of the KVM_DEV_FLIC_APF_ENABLE, KVM_DEV_FLIC_APF_DISABLE_WAIT and KVM_SET_GSI_ROUTING ioctl. All of these issues do only exist on ucontrol VMs. Fixes for the issues are included within the patch series. v2: - added documentation changes - simplify uc_flic_attrs; remove .getrc and .setrc from uc_flic_attrs (Thanks Claudio) Christoph Schlameuss (6): kvm: s390: Reject setting flic pfault attributes on ucontrol VMs selftests: kvm: s390: Add ucontrol flic attr selftests kvm: s390: Reject KVM_SET_GSI_ROUTING on ucontrol VMs selftests: kvm: s390: Add ucontrol gis routing test selftests: kvm: s390: Streamline uc_skey test to issue iske after sske selftests: kvm: s390: Add has device attr check to uc_attr_mem_limit selftest Documentation/virt/kvm/api.rst | 3 + Documentation/virt/kvm/devices/s390_flic.rst | 4 + arch/s390/kvm/interrupt.c | 6 + .../selftests/kvm/s390x/ucontrol_test.c | 194 ++++++++++++++++-- 4 files changed, 189 insertions(+), 18 deletions(-) -- 2.47.1

9 months

3
16
0 0

[PATCH] selftests/bpf: Fix compilation error in get_uprobe_offset()

by Jerome Marchand

In get_uprobe_offset(), the call to procmap_query() use the constant PROCMAP_QUERY_VMA_EXECUTABLE, even if PROCMAP_QUERY is not defined. Define PROCMAP_QUERY_VMA_EXECUTABLE when PROCMAP_QUERY isn't. Fixes: 4e9e07603ecd ("selftests/bpf: make use of PROCMAP_QUERY ioctl if available") Signed-off-by: Jerome Marchand <jmarchan(a)redhat.com> --- tools/testing/selftests/bpf/trace_helpers.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/testing/selftests/bpf/trace_helpers.c b/tools/testing/selftests/bpf/trace_helpers.c index 2d742fdac6b9..51fa29e0e083 100644 --- a/tools/testing/selftests/bpf/trace_helpers.c +++ b/tools/testing/selftests/bpf/trace_helpers.c @@ -293,6 +293,9 @@ static int procmap_query(int fd, const void *addr, __u32 query_flags, size_t *st return 0; } #else + +#define PROCMAP_QUERY_VMA_EXECUTABLE 0x04 + static int procmap_query(int fd, const void *addr, __u32 query_flags, size_t *start, size_t *offset, int *flags) { return -EOPNOTSUPP; -- 2.47.1

9 months

4
3
0 0

[PATCH for-next 0/2] selftests: Fix run_tests and install for net TARGET

by Li Zhijian

This patch set intends to fix the errors in install and run_tests when 'O=' is specified. such as `make O=/path/to/build TARGETS=net kselftest-install` Li Zhijian (2): selftests/Makefile: Create BUILD_TARGET directory for INSTALL_DEP_TARGETS selftests/Makefile: add INSTALL_DEP_TARGETS to run_tests tools/testing/selftests/Makefile | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) -- 2.44.0

9 months

1
2
0 0

[PATCH 0/5] riscv: add support for Zaamo and Zalrsc extensions

by Clément Léger

Since commit e87412e621f1 ("integrate Zaamo and Zalrsc text (#1304)"), the A extension has been described as a set of instructions provided by Zaamo and Zalrsc. Add these two extensions. This series is based on the Zc one [1]. Link: https://lore.kernel.org/linux-riscv/20240619113529.676940-1-cleger@rivosinc… --- Clément Léger (5): dt-bindings: riscv: add Zaamo and Zalrsc ISA extension description riscv: add parsing for Zaamo and Zalrsc extensions riscv: hwprobe: export Zaamo and Zalrsc extensions RISC-V: KVM: Allow Zaamo/Zalrsc extensions for Guest/VM KVM: riscv: selftests: Add Zaamo/Zalrsc extensions to get-reg-list test Documentation/arch/riscv/hwprobe.rst | 8 ++++++++ .../devicetree/bindings/riscv/extensions.yaml | 19 +++++++++++++++++++ arch/riscv/include/asm/hwcap.h | 2 ++ arch/riscv/include/uapi/asm/hwprobe.h | 2 ++ arch/riscv/include/uapi/asm/kvm.h | 2 ++ arch/riscv/kernel/cpufeature.c | 9 ++++++++- arch/riscv/kernel/sys_hwprobe.c | 2 ++ arch/riscv/kvm/vcpu_onereg.c | 4 ++++ .../selftests/kvm/riscv/get-reg-list.c | 8 ++++++++ 9 files changed, 55 insertions(+), 1 deletion(-) -- 2.45.2

9 months

4
11
0 0

[PATCH net-next v6 00/11] net: Improve netns handling in rtnetlink

by Xiao Liang

This patch series includes some netns-related improvements and fixes for rtnetlink, to make link creation more intuitive: 1) Creating link in another net namespace doesn't conflict with link names in current one. 2) Refector rtnetlink link creation. Create link in target namespace directly. So that # ip link add netns ns1 link-netns ns2 tun0 type gre ... will create tun0 in ns1, rather than create it in ns2 and move to ns1. And don't conflict with another interface named "tun0" in current netns. Patch 01 servers for 1) to avoids link name conflict in different netns. To achieve 2), there're mainly 3 steps: - Patch 02 packs newlink() parameters into a struct, including the original "src_net" along with more netns context. - Patch 03 ~ 07 converts device drivers to use the explicit netns extracted from params. - Patch 08 ~ 09 removes the old netns parameter, and converts rtnetlink to create device in target netns directly. Patch 10 ~ 11 adds some tests for link name and link netns. BTW please note there're some issues found in current code: - In amt_newlink() drivers/net/amt.c: amt->net = net; ... amt->stream_dev = dev_get_by_index(net, ... Uses net, but amt_lookup_upper_dev() only searches in dev_net. So the AMT device may not be properly deleted if it's in a different netns from lower dev. - In gtp_newlink() in drivers/net/gtp.c: gtp->net = src_net; ... gn = net_generic(dev_net(dev), gtp_net_id); list_add_rcu(&gtp->list, &gn->gtp_dev_list); Uses src_net, but priv is linked to list in dev_net. So it may not be properly deleted on removal of link netns. - In pfcp_newlink() in drivers/net/pfcp.c: pfcp->net = net; ... pn = net_generic(dev_net(dev), pfcp_net_id); list_add_rcu(&pfcp->list, &pn->pfcp_dev_list); Same as above. - In lowpan_newlink() in net/ieee802154/6lowpan/core.c: wdev = dev_get_by_index(dev_net(ldev), nla_get_u32(tb[IFLA_LINK])); Looks for IFLA_LINK in dev_net, but in theory the ifindex is defined in link netns. --- v6: - Split prototype, driver and rtnetlink changes. - Add more tests for link netns. - Fix IPv6 tunnel net overwriten in ndo_init(). - Reorder variable declarations. - Exclude a ip_tunnel-specific patch. v5: link: https://lore.kernel.org/all/20241209140151.231257-1-shaw.leon@gmail.com/ - Fix function doc in batman-adv. - Include peer_net in rtnl newlink parameters. v4: link: https://lore.kernel.org/all/20241118143244.1773-1-shaw.leon@gmail.com/ - Pack newlink() parameters to a single struct. - Use ynl async_msg_queue.empty() in selftest. v3: link: https://lore.kernel.org/all/20241113125715.150201-1-shaw.leon@gmail.com/ - Drop "netns_atomic" flag and module parameter. Add netns parameter to newlink() instead, and convert drivers accordingly. - Move python NetNSEnter helper to net selftest lib. v2: link: https://lore.kernel.org/all/20241107133004.7469-1-shaw.leon@gmail.com/ - Check NLM_F_EXCL to ensure only link creation is affected. - Add self tests for link name/ifindex conflict and notifications in different netns. - Changes in dummy driver and ynl in order to add the test case. v1: link: https://lore.kernel.org/all/20241023023146.372653-1-shaw.leon@gmail.com/ Xiao Liang (11): rtnetlink: Lookup device in target netns when creating link rtnetlink: Pack newlink() params into struct net: Use link netns in newlink() of rtnl_link_ops ieee802154: 6lowpan: Use link netns in newlink() of rtnl_link_ops net: ip_tunnel: Use link netns in newlink() of rtnl_link_ops net: ipv6: Use link netns in newlink() of rtnl_link_ops net: xfrm: Use link netns in newlink() of rtnl_link_ops rtnetlink: Remove "net" from newlink params rtnetlink: Create link directly in target net namespace selftests: net: Add python context manager for netns entering selftests: net: Add test cases for link and peer netns drivers/infiniband/ulp/ipoib/ipoib_netlink.c | 11 +- drivers/net/amt.c | 16 +- drivers/net/bareudp.c | 11 +- drivers/net/bonding/bond_netlink.c | 8 +- drivers/net/can/dev/netlink.c | 4 +- drivers/net/can/vxcan.c | 9 +- .../ethernet/qualcomm/rmnet/rmnet_config.c | 11 +- drivers/net/geneve.c | 11 +- drivers/net/gtp.c | 9 +- drivers/net/ipvlan/ipvlan.h | 4 +- drivers/net/ipvlan/ipvlan_main.c | 15 +- drivers/net/ipvlan/ipvtap.c | 10 +- drivers/net/macsec.c | 15 +- drivers/net/macvlan.c | 8 +- drivers/net/macvtap.c | 11 +- drivers/net/netkit.c | 9 +- drivers/net/pfcp.c | 11 +- drivers/net/ppp/ppp_generic.c | 10 +- drivers/net/team/team_core.c | 7 +- drivers/net/veth.c | 9 +- drivers/net/vrf.c | 11 +- drivers/net/vxlan/vxlan_core.c | 11 +- drivers/net/wireguard/device.c | 11 +- drivers/net/wireless/virtual/virt_wifi.c | 14 +- drivers/net/wwan/wwan_core.c | 25 ++- include/net/ip_tunnels.h | 5 +- include/net/rtnetlink.h | 44 +++++- net/8021q/vlan_netlink.c | 15 +- net/batman-adv/soft-interface.c | 16 +- net/bridge/br_netlink.c | 12 +- net/caif/chnl_net.c | 6 +- net/core/rtnetlink.c | 35 +++-- net/hsr/hsr_netlink.c | 14 +- net/ieee802154/6lowpan/core.c | 9 +- net/ipv4/ip_gre.c | 27 ++-- net/ipv4/ip_tunnel.c | 10 +- net/ipv4/ip_vti.c | 10 +- net/ipv4/ipip.c | 14 +- net/ipv6/ip6_gre.c | 42 ++++-- net/ipv6/ip6_tunnel.c | 20 ++- net/ipv6/ip6_vti.c | 16 +- net/ipv6/sit.c | 18 ++- net/xfrm/xfrm_interface_core.c | 15 +- tools/testing/selftests/net/Makefile | 1 + .../testing/selftests/net/lib/py/__init__.py | 2 +- tools/testing/selftests/net/lib/py/netns.py | 18 +++ tools/testing/selftests/net/link_netns.py | 142 ++++++++++++++++++ tools/testing/selftests/net/netns-name.sh | 10 ++ 48 files changed, 546 insertions(+), 226 deletions(-) create mode 100755 tools/testing/selftests/net/link_netns.py -- 2.47.1

9 months

2
13
0 0

[PATCH] kunit: platform: Resolve 'struct completion' warning

by Brian Norris

If the <kunit/platform_device.h> header is included in a test without certain other headers, it produces compiler warnings like: In file included from [...] ../include/kunit/platform_device.h:15:57: warning: ‘struct completion’ declared inside parameter list will not be visible outside of this definition or declaration 15 | struct completion *x); | ^~~~~~~~~~ Add a 'struct completion' forward declaration to resolve this. Signed-off-by: Brian Norris <briannorris(a)chromium.org> --- I'm not bothering with a Fixes tag, since this only shows up with new tests I'm writing. include/kunit/platform_device.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/kunit/platform_device.h b/include/kunit/platform_device.h index 0fc0999d2420..f8236a8536f7 100644 --- a/include/kunit/platform_device.h +++ b/include/kunit/platform_device.h @@ -2,6 +2,7 @@ #ifndef _KUNIT_PLATFORM_DRIVER_H #define _KUNIT_PLATFORM_DRIVER_H +struct completion; struct kunit; struct platform_device; struct platform_driver; -- 2.47.1.613.gc27f4b7a9f-goog

9 months

2
1
0 0

[PATCH net] selftests: openvswitch: fix tcpdump execution

by Adrian Moreno

Fix the way tcpdump is executed by: - Using the right variable for the namespace. Currently the use of the empty "ns" makes the command fail. - Waiting until it starts to capture to ensure the interesting traffic is caught on slow systems. - Using line-buffered output to ensure logs are available when the test is paused with "-p". Otherwise the last chunk of data might only be written when tcpdump is killed. Fixes: 74cc26f416b9 ("selftests: openvswitch: add interface support") Signed-off-by: Adrian Moreno <amorenoz(a)redhat.com> --- tools/testing/selftests/net/openvswitch/openvswitch.sh | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/net/openvswitch/openvswitch.sh b/tools/testing/selftests/net/openvswitch/openvswitch.sh index cc0bfae2bafa..960e1ab4dd04 100755 --- a/tools/testing/selftests/net/openvswitch/openvswitch.sh +++ b/tools/testing/selftests/net/openvswitch/openvswitch.sh @@ -171,8 +171,10 @@ ovs_add_netns_and_veths () { ovs_add_if "$1" "$2" "$4" -u || return 1 fi - [ $TRACING -eq 1 ] && ovs_netns_spawn_daemon "$1" "$ns" \ - tcpdump -i any -s 65535 + if [ $TRACING -eq 1 ]; then + ovs_netns_spawn_daemon "$1" "$3" tcpdump -l -i any -s 6553 + ovs_wait grep -q "listening on any" ${ovs_dir}/stderr + fi return 0 } -- 2.47.1

9 months

3
2
0 0

[PATCH V2] selftests: lsm: Refactor `flags_overset_lsm_set_self_attr` test

by Amit Vadhavana

Remove the temporary context variable `tctx` to simplify the code. use the original context `ctx` directly in calls to `lsm_get_self_attr`, eliminating redundancy without any functional changes. Reviewed-by: Casey Schaufler <casey(a)schaufler-ca.com> Reviewed-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Amit Vadhavana <av2082000(a)gmail.com> --- V1:- https://lore.kernel.org/all/20241112182810.24761-1-av2082000@gmail.com/ V1 -> V2 : write complete sentences instead of bullet points in the change log. --- tools/testing/selftests/lsm/lsm_set_self_attr_test.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/lsm/lsm_set_self_attr_test.c b/tools/testing/selftests/lsm/lsm_set_self_attr_test.c index 66dec47e3ca3..732e89fe99c0 100644 --- a/tools/testing/selftests/lsm/lsm_set_self_attr_test.c +++ b/tools/testing/selftests/lsm/lsm_set_self_attr_test.c @@ -56,16 +56,15 @@ TEST(flags_zero_lsm_set_self_attr) TEST(flags_overset_lsm_set_self_attr) { const long page_size = sysconf(_SC_PAGESIZE); - char *ctx = calloc(page_size, 1); + struct lsm_ctx *ctx = calloc(page_size, 1); __u32 size = page_size; - struct lsm_ctx *tctx = (struct lsm_ctx *)ctx; ASSERT_NE(NULL, ctx); if (attr_lsm_count()) { - ASSERT_LE(1, lsm_get_self_attr(LSM_ATTR_CURRENT, tctx, &size, + ASSERT_LE(1, lsm_get_self_attr(LSM_ATTR_CURRENT, ctx, &size, 0)); } - ASSERT_EQ(-1, lsm_set_self_attr(LSM_ATTR_CURRENT | LSM_ATTR_PREV, tctx, + ASSERT_EQ(-1, lsm_set_self_attr(LSM_ATTR_CURRENT | LSM_ATTR_PREV, ctx, size, 0)); free(ctx); -- 2.25.1

9 months

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror