- Linux-kselftest-mirror - lists.linaro.org

[PATCH] KVM: selftests: Fix a couple "prio" signedness bugs

by Dan Carpenter

There is an assert which relies on "prio" to be signed. GUEST_ASSERT(prio >= 0); Change the type from uint32_t to int. Fixes: 728fcc46d2c2 ("KVM: selftests: aarch64: Add test for restoring active IRQs") Fixes: 0ad3ff4a6adc ("KVM: selftests: aarch64: Add preemption tests in vgic_irq") Signed-off-by: Dan Carpenter <dan.carpenter(a)linaro.org> --- --- tools/testing/selftests/kvm/arm64/vgic_irq.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/kvm/arm64/vgic_irq.c b/tools/testing/selftests/kvm/arm64/vgic_irq.c index f4ac28d53747..e89c0fc5eef3 100644 --- a/tools/testing/selftests/kvm/arm64/vgic_irq.c +++ b/tools/testing/selftests/kvm/arm64/vgic_irq.c @@ -294,7 +294,8 @@ static void guest_restore_active(struct test_args *args, uint32_t first_intid, uint32_t num, kvm_inject_cmd cmd) { - uint32_t prio, intid, ap1r; + uint32_t intid, ap1r; + int prio; int i; /* @@ -362,7 +363,8 @@ static void test_inject_preemption(struct test_args *args, uint32_t first_intid, int num, kvm_inject_cmd cmd) { - uint32_t intid, prio, step = KVM_PRIO_STEPS; + uint32_t intid, step = KVM_PRIO_STEPS; + int prio; int i; /* Set the priorities of the first (KVM_NUM_PRIOS - 1) IRQs -- 2.47.2

8 months, 1 week

2
1
0 0

[RFC PATCH 1/2] time/timekeeping: Fix possible inconsistencies in _COARSE clockids

by John Stultz

Lei Chen raised an issue with CLOCK_MONOTONIC_COARSE seeing time inconsistencies. Lei tracked down that this was being caused by the adjustment tk->tkr_mono.xtime_nsec -= offset; which is made to compensate for the unaccumulated cycles in offset when the mult value is adjusted forward, so that the non-_COARSE clockids don't see inconsistencies. However, the _COARSE clockids don't use the mult*offset value in their calculations, so this subtraction can cause the _COARSE clock ids to jump back a bit. Now, by design, this negative adjustment should be fine, because the logic run from timekeeping_adjust() is done after we accumulate approx mult*interval_cycles into xtime_nsec. The accumulated (mult*interval_cycles) will be larger then the (mult_adj*offset) value subtracted from xtime_nsec, and both operations are done together under the tk_core.lock, so the net change to xtime_nsec should always be positive. However, do_adjtimex() calls into timekeeping_advance() as well, since we want to apply the ntp freq adjustment immediately. In this case, we don't return early when the offset is smaller then interval_cycles, so we don't end up accumulating any time into xtime_nsec. But we do go on to call timekeeping_adjust(), which modifies the mult value, and subtracts from xtime_nsec to correct for the new mult value. Here because we did not accumulate anything, we have a window where the _COARSE clockids that don't utilize the mult*offset value, can see an inconsistency. So to fix this, rework the timekeeping_advance() logic a bit so that when we are called from do_adjtimex() and the offset is smaller then cycle_interval, that we call timekeeping_forward(), to first accumulate the sub-interval time into xtime_nsec. Then with no unaccumulated cycles in offset, we can do the mult adjustment without worry of the subtraction having an impact. NOTE: This was implemented as a potential alternative to Thomas' approach here: https://lore.kernel.org/lkml/87cyej5rid.ffs@tglx/ And similarly, it needs some additional review and testing, as it was developed while packing for conference travel. Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Stephen Boyd <sboyd(a)kernel.org> Cc: Anna-Maria Behnsen <anna-maria(a)linutronix.de> Cc: Frederic Weisbecker <frederic(a)kernel.org> Cc: Shuah Khan <shuah(a)kernel.org> Cc: Miroslav Lichvar <mlichvar(a)redhat.com> Cc: linux-kselftest(a)vger.kernel.org Cc: kernel-team(a)android.com Cc: Lei Chen <lei.chen(a)smartx.com> Fixes: da15cfdae033 ("time: Introduce CLOCK_REALTIME_COARSE") Reported-by: Lei Chen <lei.chen(a)smartx.com> Closes: https://lore.kernel.org/lkml/20250310030004.3705801-1-lei.chen@smartx.com/ Diagnosed-by: Thomas Gleixner <tglx(a)linutronix.de> Signed-off-by: John Stultz <jstultz(a)google.com> --- kernel/time/timekeeping.c | 87 ++++++++++++++++++++++++++++----------- 1 file changed, 62 insertions(+), 25 deletions(-) diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 1e67d076f1955..6f3a145e7b113 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -682,18 +682,18 @@ static void timekeeping_update_from_shadow(struct tk_data *tkd, unsigned int act } /** - * timekeeping_forward_now - update clock to the current time + * timekeeping_forward - update clock to given cycle now value * @tk: Pointer to the timekeeper to update + * @cycle_now: Current clocksource read value * * Forward the current clock to update its state since the last call to * update_wall_time(). This is useful before significant clock changes, * as it avoids having to deal with this time offset explicitly. */ -static void timekeeping_forward_now(struct timekeeper *tk) +static void timekeeping_forward(struct timekeeper *tk, u64 cycle_now) { - u64 cycle_now, delta; + u64 delta; - cycle_now = tk_clock_read(&tk->tkr_mono); delta = clocksource_delta(cycle_now, tk->tkr_mono.cycle_last, tk->tkr_mono.mask, tk->tkr_mono.clock->max_raw_delta); tk->tkr_mono.cycle_last = cycle_now; @@ -710,6 +710,21 @@ static void timekeeping_forward_now(struct timekeeper *tk) } } +/** + * timekeeping_forward_now - update clock to the current time + * @tk: Pointer to the timekeeper to update + * + * Forward the current clock to update its state since the last call to + * update_wall_time(). This is useful before significant clock changes, + * as it avoids having to deal with this time offset explicitly. + */ +static void timekeeping_forward_now(struct timekeeper *tk) +{ + u64 cycle_now = tk_clock_read(&tk->tkr_mono); + + timekeeping_forward(tk, cycle_now); +} + /** * ktime_get_real_ts64 - Returns the time of day in a timespec64. * @ts: pointer to the timespec to be set @@ -2151,6 +2166,45 @@ static u64 logarithmic_accumulation(struct timekeeper *tk, u64 offset, return offset; } +static u64 timekeeping_accumulate(struct timekeeper *tk, u64 now, u64 offset, + unsigned int *clock_set) +{ + struct timekeeper *real_tk = &tk_core.timekeeper; + int shift = 0, maxshift; + + /* + * If we have a sub-cycle_interval offset, we + * are likely doing a TK_FREQ_ADJ, so accumulate + * everything so we don't have a remainder offset + * when later adjusting the multiplier + */ + if (offset < real_tk->cycle_interval) { + timekeeping_forward(tk, now); + *clock_set = 1; + return 0; + } + + /* + * With NO_HZ we may have to accumulate many cycle_intervals + * (think "ticks") worth of time at once. To do this efficiently, + * we calculate the largest doubling multiple of cycle_intervals + * that is smaller than the offset. We then accumulate that + * chunk in one go, and then try to consume the next smaller + * doubled multiple. + */ + shift = ilog2(offset) - ilog2(tk->cycle_interval); + shift = max(0, shift); + /* Bound shift to one less than what overflows tick_length */ + maxshift = (64 - (ilog2(ntp_tick_length()) + 1)) - 1; + shift = min(shift, maxshift); + while (offset >= tk->cycle_interval) { + offset = logarithmic_accumulation(tk, offset, shift, clock_set); + if (offset < tk->cycle_interval << shift) + shift--; + } + return offset; +} + /* * timekeeping_advance - Updates the timekeeper to the current time and * current NTP tick length @@ -2160,8 +2214,7 @@ static bool timekeeping_advance(enum timekeeping_adv_mode mode) struct timekeeper *tk = &tk_core.shadow_timekeeper; struct timekeeper *real_tk = &tk_core.timekeeper; unsigned int clock_set = 0; - int shift = 0, maxshift; - u64 offset; + u64 cycle_now, offset; guard(raw_spinlock_irqsave)(&tk_core.lock); @@ -2169,7 +2222,8 @@ static bool timekeeping_advance(enum timekeeping_adv_mode mode) if (unlikely(timekeeping_suspended)) return false; - offset = clocksource_delta(tk_clock_read(&tk->tkr_mono), + cycle_now = tk_clock_read(&tk->tkr_mono); + offset = clocksource_delta(cycle_now, tk->tkr_mono.cycle_last, tk->tkr_mono.mask, tk->tkr_mono.clock->max_raw_delta); @@ -2177,24 +2231,7 @@ static bool timekeeping_advance(enum timekeeping_adv_mode mode) if (offset < real_tk->cycle_interval && mode == TK_ADV_TICK) return false; - /* - * With NO_HZ we may have to accumulate many cycle_intervals - * (think "ticks") worth of time at once. To do this efficiently, - * we calculate the largest doubling multiple of cycle_intervals - * that is smaller than the offset. We then accumulate that - * chunk in one go, and then try to consume the next smaller - * doubled multiple. - */ - shift = ilog2(offset) - ilog2(tk->cycle_interval); - shift = max(0, shift); - /* Bound shift to one less than what overflows tick_length */ - maxshift = (64 - (ilog2(ntp_tick_length())+1)) - 1; - shift = min(shift, maxshift); - while (offset >= tk->cycle_interval) { - offset = logarithmic_accumulation(tk, offset, shift, &clock_set); - if (offset < tk->cycle_interval<<shift) - shift--; - } + offset = timekeeping_accumulate(tk, cycle_now, offset, &clock_set); /* Adjust the multiplier to correct NTP error */ timekeeping_adjust(tk, offset); -- 2.49.0.rc1.451.g8f38331e32-goog

8 months, 1 week

2
6
0 0

[PATCH net 0/7] selftests/net: Mixed select()+polling mode for TCP-AO tests

by Dmitry Safonov via B4 Relay

Should fix flaky tcp-ao/connect-deny-ipv6 test. Begging pardon for the delay since the report and for sending it this late in the release cycle. Signed-off-by: Dmitry Safonov <0x7f454c46(a)gmail.com> --- Dmitry Safonov (7): selftests/net: Print TCP flags in more common format selftests/net: Provide tcp-ao counters comparison helper selftests/net: Fetch and check TCP-MD5 counters selftests/net: Add mixed select()+polling mode to TCP-AO tests selftests/net: Print the testing side in unsigned-md5 selftests/net: Delete timeout from test_connect_socket() selftests/net: Drop timeout argument from test_client_verify() tools/testing/selftests/net/tcp_ao/connect-deny.c | 58 ++-- tools/testing/selftests/net/tcp_ao/connect.c | 22 +- tools/testing/selftests/net/tcp_ao/icmps-discard.c | 17 +- .../testing/selftests/net/tcp_ao/key-management.c | 76 ++--- tools/testing/selftests/net/tcp_ao/lib/aolib.h | 114 ++++++-- .../testing/selftests/net/tcp_ao/lib/ftrace-tcp.c | 7 +- tools/testing/selftests/net/tcp_ao/lib/sock.c | 315 +++++++++++++++------ tools/testing/selftests/net/tcp_ao/restore.c | 75 +++-- tools/testing/selftests/net/tcp_ao/rst.c | 47 ++- tools/testing/selftests/net/tcp_ao/self-connect.c | 18 +- tools/testing/selftests/net/tcp_ao/seq-ext.c | 30 +- tools/testing/selftests/net/tcp_ao/unsigned-md5.c | 118 ++++---- 12 files changed, 552 insertions(+), 345 deletions(-) --- base-commit: 0fed89a961ea851945d23cc35beb59d6e56c0964 change-id: 20250312-tcp-ao-selftests-polling-21b6bbdf77b6 Best regards, -- Dmitry Safonov <0x7f454c46(a)gmail.com>

8 months, 2 weeks

4
14
0 0

[PATCH v8 0/3] rust: kunit: Support KUnit tests with a user-space like syntax

by David Gow

Hi all, This is v8 of the Rust/KUnit integration patch. I think all of the suggestions have at least been responded to (even if there are a few I'm leaving as either future projects or matters of taste). Hopefully this is good-to-go for 6.15, so we can start using it concurrently with making any additional improvements we may wish. This series was originally written by José Expósito, and has been modified and updated by Matt Gilbride, Miguel Ojeda, and myself. The original version can be found here: https://github.com/Rust-for-Linux/linux/pull/950 Add support for writing KUnit tests in Rust. While Rust doctests are already converted to KUnit tests and run, they're really better suited for examples, rather than as first-class unit tests. This series implements a series of direct Rust bindings for KUnit tests, as well as a new macro which allows KUnit tests to be written using a close variant of normal Rust unit test syntax. The only change required is replacing '#[cfg(test)]' with '#[kunit_tests(kunit_test_suite_name)]' An example test would look like: #[kunit_tests(rust_kernel_hid_driver)] mod tests { use super::*; use crate::{c_str, driver, hid, prelude::*}; use core::ptr; struct SimpleTestDriver; impl Driver for SimpleTestDriver { type Data = (); } #[test] fn rust_test_hid_driver_adapter() { let mut hid = bindings::hid_driver::default(); let name = c_str!("SimpleTestDriver"); static MODULE: ThisModule = unsafe { ThisModule::from_ptr(ptr::null_mut()) }; let res = unsafe { <hid::Adapter<SimpleTestDriver> as driver::DriverOps>::register(&mut hid, name, &MODULE) }; assert_eq!(res, Err(ENODEV)); // The mock returns -19 } } Please give this a go, and make sure I haven't broken it! There's almost certainly a lot of improvements which can be made -- and there's a fair case to be made for replacing some of this with generated C code which can use the C macros -- but this is hopefully an adequate implementation for now, and the interface can (with luck) remain the same even if the implementation changes. A few small notable missing features: - Attributes (like the speed of a test) are hardcoded to the default value. - Similarly, the module name attribute is hardcoded to NULL. In C, we use the KBUILD_MODNAME macro, but I couldn't find a way to use this from Rust which wasn't more ugly than just disabling it. - Assertions are not automatically rewritten to use KUnit assertions. --- Changes since v7: https://lore.kernel.org/rust-for-linux/20250214074051.1619256-1-davidgow@go… - Reworked the SAFETY comment for addr_of_mut! use with statics in kunit_unsafe_test_suite!() (again) - Removed the second mocking example, which was causing confusion. The first example of in_kunit_test() should be clear enough. Changes since v6: https://lore.kernel.org/rust-for-linux/20250214074051.1619256-1-davidgow@go… - Fixed an [allow(unused_unsafe)] which ended up in patch 2 instead of patch 1. (Thanks, Tamir!) - Doc comments now have several useful links. (Thanks, Tamir!) - Fix a potential compile error under macos. (Thanks, Tamir!) - Several small tidy-ups to limit unsafe usage. (Thanks, Tamir!) Changes since v5: https://lore.kernel.org/all/20241213081035.2069066-1-davidgow@google.com/ - Rebased against 6.14-rc1 - Fixed a bunch of warnings / clippy lints introduced in Rust 1.83 and 1.84. - No longer needs static_mut_refs / const_mut_refs, and is much cleaned up as a result. (Thanks, Miguel) - Major documentation and example fixes. (Thanks, Miguel) Changes since v4: https://lore.kernel.org/linux-kselftest/20241101064505.3820737-1-davidgow@g… - Rebased against 6.13-rc1 - Allowed an unused_unsafe warning after the behaviour of addr_of_mut!() changed in Rust 1.82. (Thanks Boqun, Miguel) - "Expect" that the sample assert_eq!(1+1, 2) produces a clippy warning due to a redundant assertion. (Thanks Boqun, Miguel) - Fix some missing safety comments, and remove some unneeded 'unsafe' blocks. (Thanks Boqun) - Fix a couple of minor rustfmt issues which were triggering checkpatch warnings. Changes since v3: https://lore.kernel.org/linux-kselftest/20241030045719.3085147-2-davidgow@g… - The kunit_unsafe_test_suite!() macro now panic!s if the suite name is too long, triggering a compile error. (Thanks, Alice!) - The #[kunit_tests()] macro now preserves span information, so errors can be better reported. (Thanks, Boqun!) - The example tests have been updated to no longer use assert_eq!() with a constant bool argument (which triggered a clippy warning now we have the span info). Changes since v2: https://lore.kernel.org/linux-kselftest/20241029092422.2884505-1-davidgow@g… - Include missing rust/macros/kunit.rs file from v2. (Thanks Boqun!) - The kunit_unsafe_test_suite!() macro will truncate the name of the suite if it is too long. (Thanks Alice!) - The proc macro now emits an error if the suite name is too long. - We no longer needlessly use UnsafeCell<> in kunit_unsafe_test_suite!(). (Thanks Alice!) Changes since v1: https://lore.kernel.org/lkml/20230720-rustbind-v1-0-c80db349e3b5@google.com… - Rebase on top of the latest rust-next (commit 718c4069896c) - Make kunit_case a const fn, rather than a macro (Thanks Boqun) - As a result, the null terminator is now created with kernel::kunit::kunit_case_null() - Use the C kunit_get_current_test() function to implement in_kunit_test(), rather than re-implementing it (less efficiently) ourselves. Changes since the GitHub PR: - Rebased on top of kselftest/kunit - Add const_mut_refs feature This may conflict with https://lore.kernel.org/lkml/20230503090708.2524310-6-nmi@metaspace.dk/ - Add rust/macros/kunit.rs to the KUnit MAINTAINERS entry --- José Expósito (3): rust: kunit: add KUnit case and suite macros rust: macros: add macro to easily run KUnit tests rust: kunit: allow to know if we are in a test MAINTAINERS | 1 + rust/kernel/kunit.rs | 171 +++++++++++++++++++++++++++++++++++++++++++ rust/macros/kunit.rs | 161 ++++++++++++++++++++++++++++++++++++++++ rust/macros/lib.rs | 29 ++++++++ 4 files changed, 362 insertions(+) create mode 100644 rust/macros/kunit.rs -- 2.49.0.rc0.332.g42c0ae87b1-goog

8 months, 2 weeks

2
7
0 0

[PATCH net v4 0/3] vsock/bpf: Handle races between sockmap update and connect() disconnecting

by Michal Luczaj

Signal delivery during connect() may disconnect an already established socket. Problem is that such socket might have been placed in a sockmap before the connection was closed. PATCH 1 ensures this race won't lead to an unconnected vsock staying in the sockmap. PATCH 2 selftests it. PATCH 3 fixes a related race. Note that selftest in PATCH 2 does test this code as well, but winning this race variant may take more than 2 seconds, so I'm not advertising it. Signed-off-by: Michal Luczaj <mhal(a)rbox.co> --- Changes in v4: - Selftest: send signal to only our own process - Link to v3: https://lore.kernel.org/r/20250316-vsock-trans-signal-race-v3-0-17a6862277c… Changes in v3: - Selftest: drop unnecessary variable initialization and reorder the calls - Link to v2: https://lore.kernel.org/r/20250314-vsock-trans-signal-race-v2-0-421a41f60f4… Changes in v2: - Handle one more path of tripping the warning - Add a selftest - Collect R-b [Stefano] - Link to v1: https://lore.kernel.org/r/20250307-vsock-trans-signal-race-v1-1-3aca3f771fb… --- Michal Luczaj (3): vsock/bpf: Fix EINTR connect() racing sockmap update selftest/bpf: Add test for AF_VSOCK connect() racing sockmap update vsock/bpf: Fix bpf recvmsg() racing transport reassignment net/vmw_vsock/af_vsock.c | 10 ++- net/vmw_vsock/vsock_bpf.c | 24 ++++-- .../selftests/bpf/prog_tests/sockmap_basic.c | 99 ++++++++++++++++++++++ 3 files changed, 124 insertions(+), 9 deletions(-) --- base-commit: da9e8efe7ee10e8425dc356a9fc593502c8e3933 change-id: 20250305-vsock-trans-signal-race-d62f7718d099 Best regards, -- Michal Luczaj <mhal(a)rbox.co>

8 months, 2 weeks

4
11
0 0

[PATCH bpf-next] selftests/bpf: Sanitize pointer prior fclose()

by Björn Töpel

From: Björn Töpel <bjorn(a)rivosinc.com> There are scenarios where env.{sub,}test_state->stdout_saved, can be NULL, e.g. sometimes when the watchdog timeout kicks in, or if the open_memstream syscall is not available. Avoid crashing test_progs by adding an explicit NULL check prior the fclose() call. Signed-off-by: Björn Töpel <bjorn(a)rivosinc.com> --- tools/testing/selftests/bpf/test_progs.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/bpf/test_progs.c b/tools/testing/selftests/bpf/test_progs.c index d4ec9586b98c..309d9d4a8ace 100644 --- a/tools/testing/selftests/bpf/test_progs.c +++ b/tools/testing/selftests/bpf/test_progs.c @@ -103,12 +103,14 @@ static void stdio_restore(void) pthread_mutex_lock(&stdout_lock); if (env.subtest_state) { - fclose(env.subtest_state->stdout_saved); + if (env.subtest_state->stdout_saved) + fclose(env.subtest_state->stdout_saved); env.subtest_state->stdout_saved = NULL; stdout = env.test_state->stdout_saved; stderr = env.test_state->stdout_saved; } else { - fclose(env.test_state->stdout_saved); + if (env.test_state->stdout_saved) + fclose(env.test_state->stdout_saved); env.test_state->stdout_saved = NULL; stdout = env.stdout_saved; stderr = env.stderr_saved; base-commit: f3f8649585a445414521a6d5b76f41b51205086d -- 2.45.2

8 months, 2 weeks

3
2
0 0

[PATCH net v2 3/3] selftests: net: test for lwtunnel dst ref loops

by Justin Iurman

As recently specified by commit 0ea09cbf8350 ("docs: netdev: add a note on selftest posting") in net-next, the selftest is therefore shipped in this series. However, this selftest does not really test this series. It needs this series to avoid crashing the kernel. What it really tests, thanks to kmemleak, is what was fixed by the following commits: - commit c71a192976de ("net: ipv6: fix dst refleaks in rpl, seg6 and ioam6 lwtunnels") - commit 92191dd10730 ("net: ipv6: fix dst ref loops in rpl, seg6 and ioam6 lwtunnels") - commit c64a0727f9b1 ("net: ipv6: fix dst ref loop on input in seg6 lwt") - commit 13e55fbaec17 ("net: ipv6: fix dst ref loop on input in rpl lwt") - commit 0e7633d7b95b ("net: ipv6: fix dst ref loop in ila lwtunnel") - commit 5da15a9c11c1 ("net: ipv6: fix missing dst ref drop in ila lwtunnel") Signed-off-by: Justin Iurman <justin.iurman(a)uliege.be> --- Cc: Shuah Khan <shuah(a)kernel.org> Cc: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/config | 2 + .../selftests/net/lwt_dst_cache_ref_loop.sh | 246 ++++++++++++++++++ 3 files changed, 249 insertions(+) create mode 100755 tools/testing/selftests/net/lwt_dst_cache_ref_loop.sh diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 5916f3b81c39..843ab747645d 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -101,6 +101,7 @@ TEST_PROGS += vlan_bridge_binding.sh TEST_PROGS += bpf_offload.py TEST_PROGS += ipv6_route_update_soft_lockup.sh TEST_PROGS += busy_poll_test.sh +TEST_PROGS += lwt_dst_cache_ref_loop.sh # YNL files, must be before "include ..lib.mk" YNL_GEN_FILES := busy_poller netlink-dumps diff --git a/tools/testing/selftests/net/config b/tools/testing/selftests/net/config index 5b9baf708950..61e5116987f3 100644 --- a/tools/testing/selftests/net/config +++ b/tools/testing/selftests/net/config @@ -107,3 +107,5 @@ CONFIG_XFRM_INTERFACE=m CONFIG_XFRM_USER=m CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RPFILTER=m +CONFIG_IPV6_ILA=m +CONFIG_IPV6_RPL_LWTUNNEL=y diff --git a/tools/testing/selftests/net/lwt_dst_cache_ref_loop.sh b/tools/testing/selftests/net/lwt_dst_cache_ref_loop.sh new file mode 100755 index 000000000000..881eb399798f --- /dev/null +++ b/tools/testing/selftests/net/lwt_dst_cache_ref_loop.sh @@ -0,0 +1,246 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# +# Author: Justin Iurman <justin.iurman(a)uliege.be> +# +# WARNING +# ------- +# This is just a dummy script that triggers encap cases with possible dst cache +# reference loops in affected lwt users (see list below). Some cases are +# pathological configurations for simplicity, others are valid. Overall, we +# don't want this issue to happen, no matter what. In order to catch any +# reference loops, kmemleak MUST be used. The results alone are always blindly +# successful, don't rely on them. Note that the following tests may crash the +# kernel if the fix to prevent lwtunnel_{input|output|xmit}() reentry loops is +# not present. +# +# Affected lwt users so far (please update accordingly if needed): +# - ila_lwt (output only) +# - ioam6_iptunnel (output only) +# - rpl_iptunnel (both input and output) +# - seg6_iptunnel (both input and output) + +source lib.sh + +check_compatibility() +{ + setup_ns tmp_node &>/dev/null + if [ $? != 0 ]; then + echo "SKIP: Cannot create netns." + exit $ksft_skip + fi + + ip link add name veth0 netns $tmp_node type veth \ + peer name veth1 netns $tmp_node &>/dev/null + local ret=$? + + ip -netns $tmp_node link set veth0 up &>/dev/null + ret=$((ret + $?)) + + ip -netns $tmp_node link set veth1 up &>/dev/null + ret=$((ret + $?)) + + if [ $ret != 0 ]; then + echo "SKIP: Cannot configure links." + cleanup_ns $tmp_node + exit $ksft_skip + fi + + lsmod 2>/dev/null | grep -q "ila" + ila_lsmod=$? + [ $ila_lsmod != 0 ] && modprobe ila &>/dev/null + + ip -netns $tmp_node route add 2001:db8:1::/64 \ + encap ila 1:2:3:4 csum-mode no-action ident-type luid \ + hook-type output \ + dev veth0 &>/dev/null + + ip -netns $tmp_node route add 2001:db8:2::/64 \ + encap ioam6 trace prealloc type 0x800000 ns 0 size 4 \ + dev veth0 &>/dev/null + + ip -netns $tmp_node route add 2001:db8:3::/64 \ + encap rpl segs 2001:db8:3::1 dev veth0 &>/dev/null + + ip -netns $tmp_node route add 2001:db8:4::/64 \ + encap seg6 mode inline segs 2001:db8:4::1 dev veth0 &>/dev/null + + ip -netns $tmp_node -6 route 2>/dev/null | grep -q "encap ila" + skip_ila=$? + + ip -netns $tmp_node -6 route 2>/dev/null | grep -q "encap ioam6" + skip_ioam6=$? + + ip -netns $tmp_node -6 route 2>/dev/null | grep -q "encap rpl" + skip_rpl=$? + + ip -netns $tmp_node -6 route 2>/dev/null | grep -q "encap seg6" + skip_seg6=$? + + cleanup_ns $tmp_node +} + +setup() +{ + setup_ns alpha beta gamma &>/dev/null + + ip link add name veth-alpha netns $alpha type veth \ + peer name veth-betaL netns $beta &>/dev/null + + ip link add name veth-betaR netns $beta type veth \ + peer name veth-gamma netns $gamma &>/dev/null + + ip -netns $alpha link set veth-alpha name veth0 &>/dev/null + ip -netns $beta link set veth-betaL name veth0 &>/dev/null + ip -netns $beta link set veth-betaR name veth1 &>/dev/null + ip -netns $gamma link set veth-gamma name veth0 &>/dev/null + + ip -netns $alpha addr add 2001:db8:1::2/64 dev veth0 &>/dev/null + ip -netns $alpha link set veth0 up &>/dev/null + ip -netns $alpha link set lo up &>/dev/null + ip -netns $alpha route add 2001:db8:2::/64 \ + via 2001:db8:1::1 dev veth0 &>/dev/null + + ip -netns $beta addr add 2001:db8:1::1/64 dev veth0 &>/dev/null + ip -netns $beta addr add 2001:db8:2::1/64 dev veth1 &>/dev/null + ip -netns $beta link set veth0 up &>/dev/null + ip -netns $beta link set veth1 up &>/dev/null + ip -netns $beta link set lo up &>/dev/null + ip -netns $beta route del 2001:db8:2::/64 + ip -netns $beta route add 2001:db8:2::/64 dev veth1 + ip netns exec $beta \ + sysctl -wq net.ipv6.conf.all.forwarding=1 &>/dev/null + + ip -netns $gamma addr add 2001:db8:2::2/64 dev veth0 &>/dev/null + ip -netns $gamma link set veth0 up &>/dev/null + ip -netns $gamma link set lo up &>/dev/null + ip -netns $gamma route add 2001:db8:1::/64 \ + via 2001:db8:2::1 dev veth0 &>/dev/null + + sleep 1 + + ip netns exec $alpha ping6 -c 5 -W 1 2001:db8:2::2 &>/dev/null + if [ $? != 0 ]; then + echo "SKIP: Setup failed." + exit $ksft_skip + fi + + sleep 1 +} + +cleanup() +{ + cleanup_ns $alpha $beta $gamma + [ $ila_lsmod != 0 ] && modprobe -r ila &>/dev/null +} + +run_ila() +{ + if [ $skip_ila != 0 ]; then + echo "SKIP: ila (output)" + return + fi + + ip -netns $beta route del 2001:db8:2::/64 + ip -netns $beta route add 2001:db8:2:0:0:0:0:2/128 \ + encap ila 2001:db8:2:0 csum-mode no-action ident-type luid \ + hook-type output \ + dev veth1 &>/dev/null + sleep 1 + + echo "TEST: ila (output)" + ip netns exec $beta ping6 -c 2 -W 1 2001:db8:2::2 &>/dev/null + sleep 1 + + ip -netns $beta route del 2001:db8:2:0:0:0:0:2/128 + ip -netns $beta route add 2001:db8:2::/64 dev veth1 + sleep 1 +} + +run_ioam6() +{ + if [ $skip_ioam6 != 0 ]; then + echo "SKIP: ioam6 (output)" + return + fi + + ip -netns $beta route change 2001:db8:2::/64 \ + encap ioam6 trace prealloc type 0x800000 ns 1 size 4 \ + dev veth1 &>/dev/null + sleep 1 + + echo "TEST: ioam6 (output)" + ip netns exec $beta ping6 -c 2 -W 1 2001:db8:2::2 &>/dev/null + sleep 1 +} + +run_rpl() +{ + if [ $skip_rpl != 0 ]; then + echo "SKIP: rpl (input)" + echo "SKIP: rpl (output)" + return + fi + + ip -netns $beta route change 2001:db8:2::/64 \ + encap rpl segs 2001:db8:2::2 \ + dev veth1 &>/dev/null + sleep 1 + + echo "TEST: rpl (input)" + ip netns exec $alpha ping6 -c 2 -W 1 2001:db8:2::2 &>/dev/null + sleep 1 + + echo "TEST: rpl (output)" + ip netns exec $beta ping6 -c 2 -W 1 2001:db8:2::2 &>/dev/null + sleep 1 +} + +run_seg6() +{ + if [ $skip_seg6 != 0 ]; then + echo "SKIP: seg6 (input)" + echo "SKIP: seg6 (output)" + return + fi + + ip -netns $beta route change 2001:db8:2::/64 \ + encap seg6 mode inline segs 2001:db8:2::2 \ + dev veth1 &>/dev/null + sleep 1 + + echo "TEST: seg6 (input)" + ip netns exec $alpha ping6 -c 2 -W 1 2001:db8:2::2 &>/dev/null + sleep 1 + + echo "TEST: seg6 (output)" + ip netns exec $beta ping6 -c 2 -W 1 2001:db8:2::2 &>/dev/null + sleep 1 +} + +run() +{ + run_ila + run_ioam6 + run_rpl + run_seg6 +} + +if [ "$(id -u)" -ne 0 ]; then + echo "SKIP: Need root privileges." + exit $ksft_skip +fi + +if [ ! -x "$(command -v ip)" ]; then + echo "SKIP: Could not run test without ip tool." + exit $ksft_skip +fi + +check_compatibility + +trap cleanup EXIT + +setup +run + +exit $ksft_pass -- 2.34.1

8 months, 2 weeks

3
3
0 0

[PATCH bpf-next v3 0/3] bpf: Fix use-after-free of sockmap

by Jiayuan Chen

Hi all, this is the v3 version. === Syzkaller reported this issue [1]. The current sockmap has a dependency on sk_socket in both read and write stages, but there is a possibility that sk->sk_socket is released during the process, leading to panic situations. For a detailed reproduction, please refer to the description in the v2: https://lore.kernel.org/bpf/20250228055106.58071-1-jiayuan.chen@linux.dev/ The corresponding fix approaches are described in the commit messages of each patch. By the way, the current sockmap lacks statistical information, especially global statistics, such as the number of successful or failed rx and tx operations. These statistics cannot be obtained from the socket interface itself. These data will be of great help in troubleshooting issues and observing sockmap behavior. If the maintainer/reviewer does not object, I think we can provide these statistical information in the future, either through proc/trace/bpftool. [1] https://syzkaller.appspot.com/bug?extid=dd90a702f518e0eac072 --- v2 -> v3: 1. Michal Luczaj reported similar race issue under sockmap sending path. 2. Rcu lock is conflict with mutex_lock in unix socket read implementation. https://lore.kernel.org/bpf/20250228055106.58071-1-jiayuan.chen@linux.dev/ v1 -> v2: 1. Add Fixes tag. 2. Extend selftest of edge case for TCP/UDP sockets. 3. Add Reviewed-by and Acked-by tag. https://lore.kernel.org/bpf/20250226132242.52663-1-jiayuan.chen@linux.dev/T… Jiayuan Chen (3): bpf, sockmap: avoid using sk_socket after free when sending bpf, sockmap: avoid using sk_socket after free when reading selftests/bpf: Add edge case tests for sockmap net/core/skmsg.c | 22 ++++++- .../selftests/bpf/prog_tests/socket_helpers.h | 13 +++- .../selftests/bpf/prog_tests/sockmap_basic.c | 60 +++++++++++++++++++ 3 files changed, 91 insertions(+), 4 deletions(-) -- 2.47.1

8 months, 2 weeks

3
11
0 0

[PATCH] kunit: tool: fix count of tests if late test plan

by Rae Moar

Fix test count with late test plan. For example, TAP version 13 ok 1 test1 1..4 Returns a count of 1 passed, 1 crashed (because it expects tests after the test plan): returning the total count of 2 tests Change this to be 1 passed, 1 error: total count of 1 test Signed-off-by: Rae Moar <rmoar(a)google.com> --- tools/testing/kunit/kunit_parser.py | 4 ++++ tools/testing/kunit/kunit_tool_test.py | 4 ++-- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/tools/testing/kunit/kunit_parser.py b/tools/testing/kunit/kunit_parser.py index da53a709773a..c176487356e6 100644 --- a/tools/testing/kunit/kunit_parser.py +++ b/tools/testing/kunit/kunit_parser.py @@ -809,6 +809,10 @@ def parse_test(lines: LineStream, expected_num: int, log: List[str], is_subtest: test.log.extend(parse_diagnostic(lines)) if test.name != "" and not peek_test_name_match(lines, test): test.add_error(printer, 'missing subtest result line!') + elif not lines: + print_log(test.log, printer) + test.status = TestStatus.NO_TESTS + test.add_error(printer, 'No more test results!') else: parse_test_result(lines, test, expected_num, printer) diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py index 5ff4f6ffd873..bbba921e0eac 100755 --- a/tools/testing/kunit/kunit_tool_test.py +++ b/tools/testing/kunit/kunit_tool_test.py @@ -371,8 +371,8 @@ class KUnitParserTest(unittest.TestCase): """ result = kunit_parser.parse_run_tests(output.splitlines(), stdout) # Missing test results after test plan should alert a suspected test crash. - self.assertEqual(kunit_parser.TestStatus.TEST_CRASHED, result.status) - self.assertEqual(result.counts, kunit_parser.TestCounts(passed=1, crashed=1, errors=1)) + self.assertEqual(kunit_parser.TestStatus.SUCCESS, result.status) + self.assertEqual(result.counts, kunit_parser.TestCounts(passed=1, errors=2)) def line_stream_from_strs(strs: Iterable[str]) -> kunit_parser.LineStream: return kunit_parser.LineStream(enumerate(strs, start=1)) base-commit: 2e0cf2b32f72b20b0db5cc665cd8465d0f257278 -- 2.49.0.395.g12beb8f557-goog

8 months, 2 weeks

2
1
0 0

[PATCH v3 1/2] kunit: tool: Fix bug in parsing test plan

by Rae Moar

A bug was identified where the KTAP below caused an infinite loop: TAP version 13 ok 4 test_case 1..4 The infinite loop was caused by the parser not parsing a test plan if following a test result line. Fix this bug by parsing test plan line to avoid the infinite loop. Signed-off-by: Rae Moar <rmoar(a)google.com> --- Changes since v2: - None, adds test in second patch tools/testing/kunit/kunit_parser.py | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/tools/testing/kunit/kunit_parser.py b/tools/testing/kunit/kunit_parser.py index 29fc27e8949b..da53a709773a 100644 --- a/tools/testing/kunit/kunit_parser.py +++ b/tools/testing/kunit/kunit_parser.py @@ -759,7 +759,7 @@ def parse_test(lines: LineStream, expected_num: int, log: List[str], is_subtest: # If parsing the main/top-level test, parse KTAP version line and # test plan test.name = "main" - ktap_line = parse_ktap_header(lines, test, printer) + parse_ktap_header(lines, test, printer) test.log.extend(parse_diagnostic(lines)) parse_test_plan(lines, test) parent_test = True @@ -768,13 +768,12 @@ def parse_test(lines: LineStream, expected_num: int, log: List[str], is_subtest: # the KTAP version line and/or subtest header line ktap_line = parse_ktap_header(lines, test, printer) subtest_line = parse_test_header(lines, test) + test.log.extend(parse_diagnostic(lines)) + parse_test_plan(lines, test) parent_test = (ktap_line or subtest_line) if parent_test: - # If KTAP version line and/or subtest header is found, attempt - # to parse test plan and print test header - test.log.extend(parse_diagnostic(lines)) - parse_test_plan(lines, test) print_test_header(test, printer) + expected_count = test.expected_count subtests = [] test_num = 1 base-commit: 0619a4868fc1b32b07fb9ed6c69adc5e5cf4e4b2 -- 2.49.0.rc1.451.g8f38331e32-goog

8 months, 2 weeks

3
6
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror