- Linux-kselftest-mirror - lists.linaro.org

[PATCH net] selftests: net: validate team flags propagation

by Stanislav Fomichev

Cover three recent cases: 1. missing ops locking for the lowers during netdev_sync_lower_features 2. missing locking for dev_set_promiscuity (plus netdev_ops_assert_locked with a comment on why/when it's needed) 3. rcu lock during team_change_rx_flags Verified that each one triggers when the respective fix is reverted. Not sure about the placement, but since it all relies on teaming, added to the teaming directory. One ugly bit is that I add NETIF_F_LRO to netdevsim; there is no way to trigger netdev_sync_lower_features without it. Signed-off-by: Stanislav Fomichev <stfomichev(a)gmail.com> --- drivers/net/netdevsim/netdev.c | 2 + net/core/dev.c | 10 ++- .../selftests/drivers/net/team/Makefile | 2 +- .../testing/selftests/drivers/net/team/config | 1 + .../selftests/drivers/net/team/propagation.sh | 79 +++++++++++++++++++ 5 files changed, 92 insertions(+), 2 deletions(-) create mode 100755 tools/testing/selftests/drivers/net/team/propagation.sh diff --git a/drivers/net/netdevsim/netdev.c b/drivers/net/netdevsim/netdev.c index 0e0321a7ddd7..3bd1f8cffee8 100644 --- a/drivers/net/netdevsim/netdev.c +++ b/drivers/net/netdevsim/netdev.c @@ -879,11 +879,13 @@ static void nsim_setup(struct net_device *dev) NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_HW_CSUM | + NETIF_F_LRO | NETIF_F_TSO; dev->hw_features |= NETIF_F_HW_TC | NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_HW_CSUM | + NETIF_F_LRO | NETIF_F_TSO; dev->max_mtu = ETH_MAX_MTU; dev->xdp_features = NETDEV_XDP_ACT_HW_OFFLOAD; diff --git a/net/core/dev.c b/net/core/dev.c index 0d891634c692..4debd4b8e0f5 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -9188,8 +9188,16 @@ static int __dev_set_promiscuity(struct net_device *dev, int inc, bool notify) dev_change_rx_flags(dev, IFF_PROMISC); } - if (notify) + if (notify) { + /* The ops lock is only required to ensure consistent locking + * for `NETDEV_CHANGE` notifiers. This function is sometimes + * called without the lock, even for devices that are ops + * locked, such as in `dev_uc_sync_multiple` when using + * bonding or teaming. + */ + netdev_ops_assert_locked(dev); __dev_notify_flags(dev, old_flags, IFF_PROMISC, 0, NULL); + } return 0; } diff --git a/tools/testing/selftests/drivers/net/team/Makefile b/tools/testing/selftests/drivers/net/team/Makefile index 2d5a76d99181..eaf6938f100e 100644 --- a/tools/testing/selftests/drivers/net/team/Makefile +++ b/tools/testing/selftests/drivers/net/team/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 # Makefile for net selftests -TEST_PROGS := dev_addr_lists.sh +TEST_PROGS := dev_addr_lists.sh propagation.sh TEST_INCLUDES := \ ../bonding/lag_lib.sh \ diff --git a/tools/testing/selftests/drivers/net/team/config b/tools/testing/selftests/drivers/net/team/config index b5e3a3aad4bf..636b3525b679 100644 --- a/tools/testing/selftests/drivers/net/team/config +++ b/tools/testing/selftests/drivers/net/team/config @@ -1,5 +1,6 @@ CONFIG_DUMMY=y CONFIG_IPV6=y CONFIG_MACVLAN=y +CONFIG_NETDEVSIM=m CONFIG_NET_TEAM=y CONFIG_NET_TEAM_MODE_LOADBALANCE=y diff --git a/tools/testing/selftests/drivers/net/team/propagation.sh b/tools/testing/selftests/drivers/net/team/propagation.sh new file mode 100755 index 000000000000..849a5f2cb3a7 --- /dev/null +++ b/tools/testing/selftests/drivers/net/team/propagation.sh @@ -0,0 +1,79 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +set -e + +NSIM_LRO_ID=$((256 + RANDOM % 256)) +NSIM_LRO_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_LRO_ID + +NSIM_DEV_SYS_NEW=/sys/bus/netdevsim/new_device +NSIM_DEV_SYS_DEL=/sys/bus/netdevsim/del_device + +cleanup() +{ + ip link del dummyteam &>/dev/null + ip link del team0 &>/dev/null + echo $NSIM_LRO_ID > $NSIM_DEV_SYS_DEL +} + +# Trigger LRO propagation to the lower. +# https://lore.kernel.org/netdev/aBvOpkIoxcr9PfDg@mini-arch/ +team_lro() +{ + # using netdevsim because it supports NETIF_F_LRO + NSIM_LRO_NAME=$(find $NSIM_LRO_SYS/net -maxdepth 1 -type d ! \ + -path $NSIM_LRO_SYS/net -exec basename {} \;) + + ip link add name team0 type team + ip link set $NSIM_LRO_NAME down + ip link set dev $NSIM_LRO_NAME master team0 + ip link set team0 up + ethtool -K team0 large-receive-offload off + + ip link del team0 +} + +# Trigger promisc propagation to the lower during IFLA_MASTER. +# https://lore.kernel.org/netdev/20250506032328.3003050-1-sdf@fomichev.me/ +team_promisc() +{ + ip link add name dummyteam type dummy + ip link add name team0 type team + ip link set dummyteam down + ip link set team0 promisc on + ip link set dev dummyteam master team0 + ip link set team0 up + + ip link del team0 + ip link del dummyteam +} + +# Trigger promisc propagation to the lower via netif_change_flags (aka +# ndo_change_rx_flags). +# https://lore.kernel.org/netdev/20250514220319.3505158-1-stfomichev@gmail.co… +team_change_flags() +{ + ip link add name dummyteam type dummy + ip link add name team0 type team + ip link set dummyteam down + ip link set dev dummyteam master team0 + ip link set team0 up + ip link set team0 promisc on + + # Make sure we can add more L2 addresses without any issues. + ip link add link team0 address 00:00:00:00:00:01 team0.1 type macvlan + ip link set team0.1 up + + ip link del team0.1 + ip link del team0 + ip link del dummyteam +} + +trap cleanup EXIT +modprobe netdevsim || : +echo $NSIM_LRO_ID > $NSIM_DEV_SYS_NEW +udevadm settle +team_lro +team_promisc +team_change_flags +modprobe -r netdevsim || : -- 2.49.0

6 months, 3 weeks

2
2
0 0

[PATCH] kselftest/arm64: Set default OUTPUT path when undefined

by tanze

When running 'make' in tools/testing/selftests/arm64/ without explicitly setting the OUTPUT variable, the build system will creates test directories (e.g., /bti) in the root filesystem due to OUTPUT defaulting to an empty string. This causes unintended pollution of the root directory. This patch adds proper handling for the OUTPUT variable: Sets OUTPUT to the current directory (.) if not specified Signed-off-by: tanze <tanze(a)kylinos.cn> --- tools/testing/selftests/arm64/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/testing/selftests/arm64/Makefile b/tools/testing/selftests/arm64/Makefile index 22029e60eff3..c4c72ee2ef55 100644 --- a/tools/testing/selftests/arm64/Makefile +++ b/tools/testing/selftests/arm64/Makefile @@ -21,6 +21,8 @@ CFLAGS += $(KHDR_INCLUDES) CFLAGS += -I$(top_srcdir)/tools/include +OUTPUT ?= $(CURDIR) + export CFLAGS export top_srcdir -- 2.25.1

6 months, 3 weeks

2
1
0 0

[PATCH v5 25/25] tracing: selftests: Add pKVM trace remote tests

by Vincent Donnefort

Run the trace remote selftests with the pKVM trace remote "hypervisor". Cc: Shuah Khan <skhan(a)linuxfoundation.org> Cc: linux-kselftest(a)vger.kernel.org Signed-off-by: Vincent Donnefort <vdonnefort(a)google.com> diff --git a/tools/testing/selftests/ftrace/test.d/remotes/pkvm/buffer_size.tc b/tools/testing/selftests/ftrace/test.d/remotes/pkvm/buffer_size.tc new file mode 100644 index 000000000000..383ef7a84274 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/remotes/pkvm/buffer_size.tc @@ -0,0 +1,10 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Test pkvm hypervisor tracing buffer size + +SOURCE_REMOTE_TEST=1 +. $TEST_DIR/remotes/buffer_size.tc + +set -e +setup_remote "hypervisor" +test_buffer_size diff --git a/tools/testing/selftests/ftrace/test.d/remotes/pkvm/reset.tc b/tools/testing/selftests/ftrace/test.d/remotes/pkvm/reset.tc new file mode 100644 index 000000000000..679e31257d0b --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/remotes/pkvm/reset.tc @@ -0,0 +1,10 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Test pkvm hypervisor tracing reset + +SOURCE_REMOTE_TEST=1 +. $TEST_DIR/remotes/reset.tc + +set -e +setup_remote "hypervisor" +test_reset diff --git a/tools/testing/selftests/ftrace/test.d/remotes/pkvm/trace_pipe.tc b/tools/testing/selftests/ftrace/test.d/remotes/pkvm/trace_pipe.tc new file mode 100644 index 000000000000..4c77431e884f --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/remotes/pkvm/trace_pipe.tc @@ -0,0 +1,10 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Test pkvm hypervisor tracing pipe + +SOURCE_REMOTE_TEST=1 +. $TEST_DIR/remotes/trace_pipe.tc + +set -e +setup_remote "hypervisor" +test_trace_pipe diff --git a/tools/testing/selftests/ftrace/test.d/remotes/pkvm/unloading.tc b/tools/testing/selftests/ftrace/test.d/remotes/pkvm/unloading.tc new file mode 100644 index 000000000000..059c7ad1c008 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/remotes/pkvm/unloading.tc @@ -0,0 +1,10 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Test pkvm hypervisor tracing buffer unloading + +SOURCE_REMOTE_TEST=1 +. $TEST_DIR/remotes/unloading.tc + +set -e +setup_remote "hypervisor" +test_unloading -- 2.49.0.1101.gccaa498523-goog

6 months, 3 weeks

1
0
0 0

[PATCH v5 12/25] tracing: selftests: Add trace remote tests

by Vincent Donnefort

Exercise the tracefs interface for trace remote with a set of tests to check: * loading/unloading (unloading.tc) * reset (reset.tc) * size changes (buffer_size.tc) * event integrity (trace_pipe) Cc: Shuah Khan <skhan(a)linuxfoundation.org> Cc: linux-kselftest(a)vger.kernel.org Signed-off-by: Vincent Donnefort <vdonnefort(a)google.com> diff --git a/tools/testing/selftests/ftrace/test.d/remotes/buffer_size.tc b/tools/testing/selftests/ftrace/test.d/remotes/buffer_size.tc new file mode 100644 index 000000000000..60bf431ccc91 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/remotes/buffer_size.tc @@ -0,0 +1,24 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Test trace remote buffer size + +. $TEST_DIR/remotes/functions + +test_buffer_size() +{ + echo 0 > tracing_on + assert_unloaded + + echo 4096 > buffer_size_kb + echo 1 > tracing_on + assert_loaded + + echo 0 > tracing_on + echo 7 > buffer_size_kb +} + +if [ -z "$SOURCE_REMOTE_TEST" ]; then + set -e + setup_remote_test + test_buffer_size +fi diff --git a/tools/testing/selftests/ftrace/test.d/remotes/functions b/tools/testing/selftests/ftrace/test.d/remotes/functions new file mode 100644 index 000000000000..504a495b3b1b --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/remotes/functions @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: GPL-2.0 + +setup_remote() +{ + local name=$1 + + [ -e $TRACING_DIR/remotes/$name/write_event ] || exit_unresolved + + cd remotes/$name/ + echo 0 > tracing_on + clear_trace + echo 7 > buffer_size_kb + echo 0 > events/enable + echo 1 > events/$name/selftest/enable + echo 1 > tracing_on +} + +setup_remote_test() +{ + [ -d $TRACING_DIR/remotes/test/ ] || modprobe remote_test || exit_unresolved + + setup_remote "test" +} + +assert_loaded() +{ + grep -q "(loaded)" buffer_size_kb +} + +assert_unloaded() +{ + grep -q "(unloaded)" buffer_size_kb +} diff --git a/tools/testing/selftests/ftrace/test.d/remotes/reset.tc b/tools/testing/selftests/ftrace/test.d/remotes/reset.tc new file mode 100644 index 000000000000..93d6eb2a807f --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/remotes/reset.tc @@ -0,0 +1,105 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Test trace remote reset + +. $TEST_DIR/remotes/functions + +get_cpu_ids() +{ + sed -n 's/^processor\s*:\s*$[0-9]\+$.*/\1/p' /proc/cpuinfo +} + +dump_trace() +{ + output=$(mktemp /tmp/remote_test.XXXXXX) + cat trace_pipe > $output & + pid=$! + sleep 1 + kill -1 $pid + + echo $output +} + +check_reset() +{ + write_event_path="write_event" + taskset="" + + clear_trace + + # Is the buffer empty? + output=$(dump_trace) + test $(wc -l $output | cut -d ' ' -f1) -eq 0 + + if $(echo $(pwd) | grep -q "per_cpu/cpu"); then + write_event_path="../../write_event" + cpu_id=$(echo $(pwd) | sed -e 's/.*per_cpu\/cpu//') + taskset="taskset -c $cpu_id" + fi + rm $output + + # Can we properly write a new event? + $taskset echo 7890 > $write_event_path + output=$(dump_trace) + test $(wc -l $output | cut -d ' ' -f1) -eq 1 + grep -q "id=7890" $output + rm $output +} + +test_global_interface() +{ + output=$(mktemp /tmp/remote_test.XXXXXX) + + # Confidence check + echo 123456 > write_event + output=$(dump_trace) + grep -q "id=123456" $output + rm $output + + # Reset single event + echo 1 > write_event + check_reset + + # Reset lost events + for i in $(seq 1 10000); do + echo 1 > write_event + done + check_reset +} + +test_percpu_interface() +{ + [ "$(get_cpu_ids | wc -l)" -ge 2 ] || return 0 + + for cpu in $(get_cpu_ids); do + taskset -c $cpu echo 1 > write_event + done + + check_non_empty=0 + for cpu in $(get_cpu_ids); do + cd per_cpu/cpu$cpu/ + + if [ $check_non_empty -eq 0 ]; then + check_reset + check_non_empty=1 + else + # Check we have only reset 1 CPU + output=$(dump_trace) + test $(wc -l $output | cut -d ' ' -f1) -eq 1 + rm $output + fi + cd - + done +} + +test_reset() +{ + test_global_interface + test_percpu_interface +} + +if [ -z "$SOURCE_REMOTE_TEST" ]; then + set -e + setup_remote_test + test_reset +fi diff --git a/tools/testing/selftests/ftrace/test.d/remotes/trace_pipe.tc b/tools/testing/selftests/ftrace/test.d/remotes/trace_pipe.tc new file mode 100644 index 000000000000..f4bd2b3655e0 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/remotes/trace_pipe.tc @@ -0,0 +1,57 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Test trace remote trace_pipe + +. $TEST_DIR/remotes/functions + +test_trace_pipe() +{ + echo 0 > tracing_on + assert_unloaded + + echo 1024 > buffer_size_kb + echo 1 > tracing_on + assert_loaded + + output=$(mktemp /tmp/remote_test.XXXXXX) + + cat trace_pipe > $output & + pid=$! + + for i in $(seq 1 1000); do + echo $i > write_event + done + + echo 0 > tracing_on + sleep 1 + kill $pid + + prev_ts=0 # TODO: Init with proper clock value + prev_id=0 + + # Only keep <timestamp> <id> + sed -i -e 's/\[[0-9]*\]\s*$[0-9]*.[0-9]*$: [a-z]* id=$[0-9]*$/\1 \2/' $output + + IFS=$'\n' + for line in $(cat $output); do + ts=$(echo $line | cut -d ' ' -f 1) + id=$(echo $line | cut -d ' ' -f 2) + + test $(echo "$ts>$prev_ts" | bc) -eq 1 + test $id -eq $((prev_id + 1)) + + prev_ts=$ts + prev_id=$id + done + + test $prev_id -eq 1000 + + rm $output +} + +if [ -z "$SOURCE_REMOTE_TEST" ]; then + set -e + + setup_remote_test + test_trace_pipe +fi diff --git a/tools/testing/selftests/ftrace/test.d/remotes/unloading.tc b/tools/testing/selftests/ftrace/test.d/remotes/unloading.tc new file mode 100644 index 000000000000..99f97e100fde --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/remotes/unloading.tc @@ -0,0 +1,40 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Test trace remote unloading + +. $TEST_DIR/remotes/functions + +test_unloading() +{ + # No reader, writing + assert_loaded + + # No reader, no writing + echo 0 > tracing_on + assert_unloaded + + # 1 reader, no writing + cat trace_pipe & + pid=$! + sleep 1 + assert_loaded + kill $pid + assert_unloaded + + # No reader, no writing, events + echo 1 > tracing_on + echo 1 > write_event + echo 0 > tracing_on + assert_loaded + + # Test reset + clear_trace + assert_unloaded +} + +if [ -z "$SOURCE_REMOTE_TEST" ]; then + set -e + + setup_remote_test + test_unloading +fi -- 2.49.0.1101.gccaa498523-goog

6 months, 3 weeks

1
0
0 0

[PATCH v2 0/2] Skip mm selftests instead when kernel features are not present

by Zi Yan

Two guard_regions tests on userfaultfd fail when userfaultfd is not present. Skip them instead. hugevm test reads kernel config to get page table level information and fails when neither /proc/config.gz nor /boot/config-* is present. Skip it instead. Zi Yan (2): selftests/mm: skip guard_regions.uffd tests when uffd is not present. selftests/mm: skip hugevm test if kernel config file is not present. tools/testing/selftests/mm/guard-regions.c | 17 ++++++++++-- .../selftests/mm/va_high_addr_switch.sh | 26 +++++++------------ 2 files changed, 24 insertions(+), 19 deletions(-) -- 2.47.2

6 months, 3 weeks

1
2
0 0

[RFC PATCH v2 0/3] KVM: arm64: Don't claim MTE_ASYNC if not supported

by Ben Horgan

The ID_AA64PFR1_EL1.MTE_frac field is currently hidden from KVM. However, when ID_AA64PFR1_EL1.MTE==2, ID_AA64PFR1_EL1.MTE_frac==0 indicates that MTE_ASYNC is supported. On a host with ID_AA64PFR1_EL1.MTE==2 but without MTE_ASYNC support a guest with the MTE capability enabled will incorrectly see MTE_ASYNC advertised as supported. This series fixes that. This was found by inspection and the current behaviour is not known to break anything. Linux doesn't check MTE_frac, and wrongly, assumes MTE async faults can be generated whenever MTE is supported. This is a separate problem and not addressed here. I am looking for feedback on whether this change is valuable or otherwise. Changes since v1: Only pass MTE_Frac hw value to the guest when it is the exact failure case. Changed base commit to v6.15-rc5 but still applies on v6.16-rc2 as well. Ben Horgan (3): arm64/sysreg: Expose MTE_frac so that it is visible to KVM KVM: arm64: Make MTE_frac masking conditional on MTE capability KVM: selftests: Confirm exposing MTE_frac does not break migration arch/arm64/kernel/cpufeature.c | 1 + arch/arm64/kvm/sys_regs.c | 28 ++++++- .../testing/selftests/kvm/arm64/set_id_regs.c | 77 ++++++++++++++++++- 3 files changed, 103 insertions(+), 3 deletions(-) base-commit: 92a09c47464d040866cf2b4cd052bc60555185fb -- 2.43.0

6 months, 3 weeks

2
4
0 0

[PATCH] selftests: Improve test output grammar, code style

by Hanne-Lotta Mäenpää

Add small grammar fixes in perf events and Real Time Clock tests' output messages. Include braces around a single if statement, when there are multiple statements in the else branch, to align with the kernel coding style. Signed-off-by: Hanne-Lotta Mäenpää <hannelotta(a)gmail.com> --- tools/testing/selftests/perf_events/watermark_signal.c | 7 ++++--- tools/testing/selftests/rtc/rtctest.c | 10 +++++----- 2 files changed, 9 insertions(+), 8 deletions(-) diff --git a/tools/testing/selftests/perf_events/watermark_signal.c b/tools/testing/selftests/perf_events/watermark_signal.c index 49dc1e831174..6176afd4950b 100644 --- a/tools/testing/selftests/perf_events/watermark_signal.c +++ b/tools/testing/selftests/perf_events/watermark_signal.c @@ -65,8 +65,9 @@ TEST(watermark_signal) child = fork(); EXPECT_GE(child, 0); - if (child == 0) + if (child == 0) { do_child(); + } else if (child < 0) { perror("fork()"); goto cleanup; @@ -75,7 +76,7 @@ TEST(watermark_signal) if (waitpid(child, &child_status, WSTOPPED) != child || !(WIFSTOPPED(child_status) && WSTOPSIG(child_status) == SIGSTOP)) { fprintf(stderr, - "failed to sycnhronize with child errno=%d status=%x\n", + "failed to synchronize with child errno=%d status=%x\n", errno, child_status); goto cleanup; @@ -84,7 +85,7 @@ TEST(watermark_signal) fd = syscall(__NR_perf_event_open, &attr, child, -1, -1, PERF_FLAG_FD_CLOEXEC); if (fd < 0) { - fprintf(stderr, "failed opening event %llx\n", attr.config); + fprintf(stderr, "failed to setup performance monitoring %llx\n", attr.config); goto cleanup; } diff --git a/tools/testing/selftests/rtc/rtctest.c b/tools/testing/selftests/rtc/rtctest.c index be175c0e6ae3..8fd4d5d3b527 100644 --- a/tools/testing/selftests/rtc/rtctest.c +++ b/tools/testing/selftests/rtc/rtctest.c @@ -138,10 +138,10 @@ TEST_F_TIMEOUT(rtc, date_read_loop, READ_LOOP_DURATION_SEC + 2) { rtc_read = rtc_time_to_timestamp(&rtc_tm); /* Time should not go backwards */ ASSERT_LE(prev_rtc_read, rtc_read); - /* Time should not increase more then 1s at a time */ + /* Time should not increase more than 1s per read */ ASSERT_GE(prev_rtc_read + 1, rtc_read); - /* Sleep 11ms to avoid killing / overheating the RTC */ + /* Sleep 11ms to avoid overheating the RTC */ nanosleep_with_retries(READ_LOOP_SLEEP_MS * 1000000); prev_rtc_read = rtc_read; @@ -236,7 +236,7 @@ TEST_F(rtc, alarm_alm_set) { if (alarm_state == RTC_ALARM_DISABLED) SKIP(return, "Skipping test since alarms are not supported."); if (alarm_state == RTC_ALARM_RES_MINUTE) - SKIP(return, "Skipping test since alarms has only minute granularity."); + SKIP(return, "Skipping test since alarms have only minute granularity."); rc = ioctl(self->fd, RTC_RD_TIME, &tm); ASSERT_NE(-1, rc); @@ -306,7 +306,7 @@ TEST_F(rtc, alarm_wkalm_set) { if (alarm_state == RTC_ALARM_DISABLED) SKIP(return, "Skipping test since alarms are not supported."); if (alarm_state == RTC_ALARM_RES_MINUTE) - SKIP(return, "Skipping test since alarms has only minute granularity."); + SKIP(return, "Skipping test since alarms have only minute granularity."); rc = ioctl(self->fd, RTC_RD_TIME, &alarm.time); ASSERT_NE(-1, rc); @@ -502,7 +502,7 @@ int main(int argc, char **argv) if (access(rtc_file, R_OK) == 0) ret = test_harness_run(argc, argv); else - ksft_exit_skip("[SKIP]: Cannot access rtc file %s - Exiting\n", + ksft_exit_skip("Cannot access RTC file %s - exiting\n", rtc_file); return ret; -- 2.39.5

6 months, 3 weeks

2
2
0 0

[PATCH 1/2] selftests/mm: skip uffd tests in madv_guard if uffd is not present.

by Zi Yan

When userfaultfd is not compiled into kernel, userfaultfd() returns -1, causing uffd tests in madv_guard fail. Skip the tests instead. Signed-off-by: Zi Yan <ziy(a)nvidia.com> --- tools/testing/selftests/mm/guard-regions.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/mm/guard-regions.c b/tools/testing/selftests/mm/guard-regions.c index 0cd9d236649d..93af3d3760f9 100644 --- a/tools/testing/selftests/mm/guard-regions.c +++ b/tools/testing/selftests/mm/guard-regions.c @@ -1453,8 +1453,21 @@ TEST_F(guard_regions, uffd) /* Set up uffd. */ uffd = userfaultfd(0); - if (uffd == -1 && errno == EPERM) - ksft_exit_skip("No userfaultfd permissions, try running as root.\n"); + if (uffd == -1) { + switch (errno) { + case EPERM: + SKIP(return, "No userfaultfd permissions, try running as root."); + break; + case ENOSYS: + SKIP(return, "userfaultfd is not supported/not enabled."); + break; + default: + ksft_exit_fail_msg("userfaultfd failed with %s\n", + strerror(errno)); + break; + } + } + ASSERT_NE(uffd, -1); ASSERT_EQ(ioctl(uffd, UFFDIO_API, &api), 0); -- 2.47.2

6 months, 3 weeks

3
8
0 0

[PATCH net-next v5] selftests/vsock: add initial vmtest.sh for vsock

by Bobby Eshleman

This commit introduces a new vmtest.sh runner for vsock. It uses virtme-ng/qemu to run tests in a VM. The tests validate G2H, H2G, and loopback. The testing tools from tools/testing/vsock/ are reused. Currently, only vsock_test is used. VMCI and hyperv support is automatically built, though not used. Only tested on x86. To run: $ tools/testing/selftests/vsock/vmtest.sh or $ make -C tools/testing/selftests TARGETS=vsock run_tests Example runs: $ ./tools/testing/selftests/vsock/vmtest.sh TAP version 13 1..3 not ok 0 vm_server_host_client # exit=1 ok 1 vm_client_host_server ok 2 vm_loopback 1..3 $ ./tools/testing/selftests/vsock/vmtest.sh vm_loopback TAP version 13 1..1 ok 0 vm_loopback 1..1 Future work can include vsock_diag_test. The tap output style copies mm's run_vmtests.sh. Because vsock requires a VM to test anything other than loopback, this patch adds vmtest.sh as a kselftest itself. This is different than other systems that have a "vmtest.sh", where it is used as a utility script to spin up a VM to run the selftests as a guest (but isn't hooked into kselftest). Testing in NIPA is still WIP. Signed-off-by: Bobby Eshleman <bobbyeshleman(a)gmail.com> --- Changes in v5: - make log file a tmpfile (Paolo) - make sure both default and user defined QEMU gets handled by the dependency check (Paolo) - increased VM boot up timeout from 1m to 3m for slow hosts (Paolo) - rename vm_setup -> vm_start (Paolo) - derive wait_for_listener from selftests/net/net_helper.sh to removes ss usage - Remove unused 'unset IFS' line (Paolo) - leave space after variable declarations (Paolo) - make QEMU_PIDFILE a tmp file (Paolo) - make everything readonly that is only read (Paolo) - source ktap_helpers.sh for KSFT_PASS and friends (Paolo) - don't check for timeout util (Paolo) - add missing usage string for -q qemu arg - add tap prefix to SUMMARY line since it isn't part of TAP protocol - exit with the correct status code based on failure/pass counts - Link to v4: https://lore.kernel.org/r/20250507-vsock-vmtest-v4-1-6e2a97262cd6@gmail.com Changes in v4: - do not use special tab delimiter for help string parsing (Stefano + Paolo) - fix paths for when installing kselftest and running out-of-tree (Paolo) - change vng to using running kernel instead of compiled kernel (Paolo) - use multi-line string for QEMU_OPTS (Stefano) - change timeout to 300s (Paolo) - skip if tools are not found and use kselftests status codes (Paolo) - remove build from vmtest.sh (Paolo) - change 2222 -> SSH_HOST_PORT (Stefano) - add tap-format output - add vmtest.log to gitignore - check for vsock_test binary and remind user to build it if missing - create a proper build in makefile - style fixes - add ssh, timeout, and pkill to dependency check, just in case - fix numerical comparison in conditionals - check qemu pidfile exists before proceeding (avoid wasting time waiting for ssh) - fix tracking of pass/fail bug - fix stderr redirection bug - Link to v3: https://lore.kernel.org/r/20250428-vsock-vmtest-v3-1-181af6163f3e@gmail.com Changes in v3: - use common conditional syntax for checking variables - use return value instead of global rc - fix typo TEST_HOST_LISTENER_PORT -> TEST_HOST_PORT_LISTENER - use SIGTERM instead of SIGKILL on cleanup - use peer-cid=1 for loopback - change sleep delay times into globals - fix test_vm_loopback logging - add test selection in arguments - make QEMU an argument - check that vng binary is on path - use QEMU variable - change <tab><backslash> to <space><backslash> - fix hardcoded file paths - add comment in commit msg about script that vmtest.sh was based off of - Add tools/testing/selftest/vsock/Makefile for kselftest - Link to v2: https://lore.kernel.org/r/20250417-vsock-vmtest-v2-1-3901a27331e8@gmail.com Changes in v2: - add kernel oops and warnings checker - change testname variable to use FUNCNAME - fix spacing in test_vm_server_host_client - add -s skip build option to vmtest.sh - add test_vm_loopback - pass port to vm_wait_for_listener - fix indentation in vmtest.sh - add vmci and hyperv to config - changed whitespace from tabs to spaces in help string - Link to v1: https://lore.kernel.org/r/20250410-vsock-vmtest-v1-1-f35a81dab98c@gmail.com --- MAINTAINERS | 1 + tools/testing/selftests/vsock/.gitignore | 2 + tools/testing/selftests/vsock/Makefile | 16 ++ tools/testing/selftests/vsock/config | 114 ++++++++ tools/testing/selftests/vsock/settings | 1 + tools/testing/selftests/vsock/vmtest.sh | 441 +++++++++++++++++++++++++++++++ 6 files changed, 575 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 657a67f9031ef7798c19ac63e6383d4cb18a9e1f..3fbdd7bbfce7196a3cc7db70203317c6bd0e51fd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -25751,6 +25751,7 @@ F: include/uapi/linux/vm_sockets.h F: include/uapi/linux/vm_sockets_diag.h F: include/uapi/linux/vsockmon.h F: net/vmw_vsock/ +F: tools/testing/selftests/vsock/ F: tools/testing/vsock/ VMALLOC diff --git a/tools/testing/selftests/vsock/.gitignore b/tools/testing/selftests/vsock/.gitignore new file mode 100644 index 0000000000000000000000000000000000000000..9c5bf379480f829a14713d5f5dc7d525bc272e84 --- /dev/null +++ b/tools/testing/selftests/vsock/.gitignore @@ -0,0 +1,2 @@ +vmtest.log +vsock_test diff --git a/tools/testing/selftests/vsock/Makefile b/tools/testing/selftests/vsock/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..7ab4970e5e8a019be33f96a36f95c00573d7bfcf --- /dev/null +++ b/tools/testing/selftests/vsock/Makefile @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 + +CURDIR := $(abspath .) +TOOLSDIR := $(abspath ../../..) + +$(OUTPUT)/vsock_test: $(TOOLSDIR)/testing/vsock/vsock_test + install -m 755 $< $@ + +$(TOOLSDIR)/testing/vsock/vsock_test: + $(MAKE) -C $(TOOLSDIR)/testing/vsock vsock_test + +TEST_PROGS += vmtest.sh +TEST_GEN_FILES := vsock_test + +include ../lib.mk + diff --git a/tools/testing/selftests/vsock/config b/tools/testing/selftests/vsock/config new file mode 100644 index 0000000000000000000000000000000000000000..3bffaaf98fff92dc0e3bc1286afa3d8d5d52f4c7 --- /dev/null +++ b/tools/testing/selftests/vsock/config @@ -0,0 +1,114 @@ +CONFIG_BLK_DEV_INITRD=y +CONFIG_BPF=y +CONFIG_BPF_SYSCALL=y +CONFIG_BPF_JIT=y +CONFIG_HAVE_EBPF_JIT=y +CONFIG_BPF_EVENTS=y +CONFIG_FTRACE_SYSCALLS=y +CONFIG_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_DYNAMIC_FTRACE=y +CONFIG_HAVE_KPROBES=y +CONFIG_KPROBES=y +CONFIG_KPROBE_EVENTS=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_UPROBES=y +CONFIG_UPROBE_EVENTS=y +CONFIG_DEBUG_FS=y +CONFIG_FW_CFG_SYSFS=y +CONFIG_FW_CFG_SYSFS_CMDLINE=y +CONFIG_DRM=y +CONFIG_DRM_VIRTIO_GPU=y +CONFIG_DRM_VIRTIO_GPU_KMS=y +CONFIG_DRM_BOCHS=y +CONFIG_VIRTIO_IOMMU=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_PCI=y +CONFIG_SND_INTEL8X0=y +CONFIG_SND_HDA_CODEC_REALTEK=y +CONFIG_SECURITYFS=y +CONFIG_CGROUP_BPF=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_XZ=y +CONFIG_SQUASHFS_ZSTD=y +CONFIG_FUSE_FS=y +CONFIG_SERIO=y +CONFIG_PCI=y +CONFIG_INPUT=y +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_X86_VERBOSE_BOOTUP=y +CONFIG_VGA_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_VESA=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_DRV_CMOS=y +CONFIG_HYPERVISOR_GUEST=y +CONFIG_PARAVIRT=y +CONFIG_KVM_GUEST=y +CONFIG_KVM=y +CONFIG_KVM_INTEL=y +CONFIG_KVM_AMD=y +CONFIG_VSOCKETS=y +CONFIG_VSOCKETS_DIAG=y +CONFIG_VSOCKETS_LOOPBACK=y +CONFIG_VMWARE_VMCI_VSOCKETS=y +CONFIG_VIRTIO_VSOCKETS=y +CONFIG_VIRTIO_VSOCKETS_COMMON=y +CONFIG_HYPERV_VSOCKETS=y +CONFIG_VMWARE_VMCI=y +CONFIG_VHOST_VSOCK=y +CONFIG_HYPERV=y +CONFIG_UEVENT_HELPER=n +CONFIG_VIRTIO=y +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_BALLOON=y +CONFIG_NET=y +CONFIG_NET_CORE=y +CONFIG_NETDEVICES=y +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_INET=y +CONFIG_NET_9P=y +CONFIG_NET_9P_VIRTIO=y +CONFIG_9P_FS=y +CONFIG_VIRTIO_NET=y +CONFIG_CMDLINE_OVERRIDE=n +CONFIG_BINFMT_SCRIPT=y +CONFIG_SHMEM=y +CONFIG_TMPFS=y +CONFIG_UNIX=y +CONFIG_MODULE_SIG_FORCE=n +CONFIG_DEVTMPFS=y +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_UNIX98_PTYS=y +CONFIG_EARLY_PRINTK=y +CONFIG_INOTIFY_USER=y +CONFIG_BLOCK=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_SCSI=y +CONFIG_SCSI_VIRTIO=y +CONFIG_BLK_DEV_SD=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +CONFIG_I6300ESB_WDT=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y +CONFIG_OVERLAY_FS=y +CONFIG_DAX=y +CONFIG_DAX_DRIVER=y +CONFIG_FS_DAX=y +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTREMOVE=y +CONFIG_ZONE_DEVICE=y +CONFIG_FUSE_FS=y +CONFIG_VIRTIO_FS=y +CONFIG_VSOCKETS=y +CONFIG_VIRTIO_VSOCKETS=y diff --git a/tools/testing/selftests/vsock/settings b/tools/testing/selftests/vsock/settings new file mode 100644 index 0000000000000000000000000000000000000000..694d70710ff08ac9fc91e9ecb5dbdadcf051f019 --- /dev/null +++ b/tools/testing/selftests/vsock/settings @@ -0,0 +1 @@ +timeout=300 diff --git a/tools/testing/selftests/vsock/vmtest.sh b/tools/testing/selftests/vsock/vmtest.sh new file mode 100755 index 0000000000000000000000000000000000000000..f5f920e83db6d24793b435b373e75d6051b7a9d5 --- /dev/null +++ b/tools/testing/selftests/vsock/vmtest.sh @@ -0,0 +1,441 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (c) 2025 Meta Platforms, Inc. and affiliates +# +# Dependencies: +# * virtme-ng +# * busybox-static (used by virtme-ng) +# * qemu (used by virtme-ng) + +readonly SCRIPT_DIR="$(cd -P -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd -P)" + +source ${SCRIPT_DIR}/../kselftest/ktap_helpers.sh + +readonly TAP_PREFIX="# " +readonly VSOCK_TEST=${SCRIPT_DIR}/vsock_test + +readonly TEST_GUEST_PORT=51000 +readonly TEST_HOST_PORT=50000 +readonly TEST_HOST_PORT_LISTENER=50001 +readonly SSH_GUEST_PORT=22 +readonly SSH_HOST_PORT=2222 +readonly VSOCK_CID=1234 +readonly WAIT_PERIOD=3 +readonly WAIT_PERIOD_MAX=60 +readonly WAIT_TOTAL=$(( WAIT_PERIOD * WAIT_PERIOD_MAX )) +readonly QEMU_PIDFILE=$(mktemp /tmp/qemu_vsock_vmtest_XXXX.pid) + +# virtme-ng offers a netdev for ssh when using "--ssh", but we also need a +# control port forwarded for vsock_test. Because virtme-ng doesn't support +# adding an additional port to forward to the device created from "--ssh" and +# virtme-init mistakenly sets identical IPs to the ssh device and additional +# devices, we instead opt out of using --ssh, add the device manually, and also +# add the kernel cmdline options that virtme-init uses to setup the interface. +readonly QEMU_TEST_PORT_FWD="hostfwd=tcp::${TEST_HOST_PORT}-:${TEST_GUEST_PORT}" +readonly QEMU_SSH_PORT_FWD="hostfwd=tcp::${SSH_HOST_PORT}-:${SSH_GUEST_PORT}" +readonly QEMU_OPTS="\ + -netdev user,id=n0,${QEMU_TEST_PORT_FWD},${QEMU_SSH_PORT_FWD} \ + -device virtio-net-pci,netdev=n0 \ + -device vhost-vsock-pci,guest-cid=${VSOCK_CID} \ + --pidfile ${QEMU_PIDFILE} \ +" +readonly KERNEL_CMDLINE="virtme.dhcp net.ifnames=0 biosdevname=0 virtme.ssh virtme_ssh_user=$USER" +readonly LOG=$(mktemp /tmp/vsock_vmtest_XXXX.log) +readonly TEST_NAMES=(vm_server_host_client vm_client_host_server vm_loopback) +readonly TEST_DESCS=( + "Run vsock_test in server mode on the VM and in client mode on the host." + "Run vsock_test in client mode on the VM and in server mode on the host." + "Run vsock_test using the loopback transport in the VM." +) + +VERBOSE=0 + +usage() { + local name + local desc + local i + + echo + echo "$0 [OPTIONS] [TEST]..." + echo "If no TEST argument is given, all tests will be run." + echo + echo "Options" + echo " -v: verbose output" + echo " -q: set the path to or name of qemu binary" + echo + echo "Available tests" + + for ((i = 0; i < ${#TEST_NAMES[@]}; i++)); do + name=${TEST_NAMES[${i}]} + desc=${TEST_DESCS[${i}]} + printf "\t%-35s%-35s\n" "${name}" "${desc}" + done + echo + + exit 1 +} + +die() { + echo "$*" >&2 + exit ${KSFT_FAIL} +} + +vm_ssh() { + ssh -q -o UserKnownHostsFile=/dev/null -p ${SSH_HOST_PORT} localhost $* + return $? +} + +cleanup() { + if [[ -f "${QEMU_PIDFILE}" ]]; then + pkill -SIGTERM -F ${QEMU_PIDFILE} 2>&1 > /dev/null + fi +} + +check_args() { + local found + + for arg in "$@"; do + found=0 + for name in "${TEST_NAMES[@]}"; do + if [[ "${name}" = "${arg}" ]]; then + found=1 + break + fi + done + + if [[ "${found}" -eq 0 ]]; then + echo "${arg} is not an available test" >&2 + usage + fi + done + + for arg in "$@"; do + if ! command -v > /dev/null "test_${arg}"; then + echo "Test ${arg} not found" >&2 + usage + fi + done +} + +check_deps() { + for dep in vng ${QEMU} busybox pkill ssh; do + if [[ ! -x "$(command -v ${dep})" ]]; then + echo -e "skip: dependency ${dep} not found!\n" + exit ${KSFT_SKIP} + fi + done + + if [[ ! -x $(command -v ${VSOCK_TEST}) ]]; then + printf "skip: ${VSOCK_TEST} not found!" + printf " Please build the kselftest vsock target.\n" + exit ${KSFT_SKIP} + fi +} + +vm_start() { + local VNG_OPTS="" + local logfile=/dev/null + local qemu + + qemu=$(command -v ${QEMU}) + + if [[ "${VERBOSE}" = 1 ]]; then + VNG_OPTS="--verbose" + logfile=/dev/stdout + fi + vng \ + $VNG_OPTS \ + --run \ + --qemu-opts="${QEMU_OPTS}" \ + --qemu="${qemu}" \ + --user root \ + --append "${KERNEL_CMDLINE}" \ + --rw &> ${logfile} & + + timeout ${WAIT_TOTAL} \ + bash -c 'while [[ ! -e '"${QEMU_PIDFILE}"' ]]; do sleep 1; done; exit 0' + if [[ ! $? -eq 0 ]]; then + die "failed to boot VM" + fi +} + +vm_wait_for_ssh() { + local i + + i=0 + while [[ true ]]; do + if [[ ${i} -gt ${WAIT_PERIOD_MAX} ]]; then + die "Timed out waiting for guest ssh" + fi + vm_ssh -- true + if [[ $? -eq 0 ]]; then + break + fi + i=$(( i + 1 )) + sleep ${WAIT_PERIOD} + done +} + +# derived from selftests/net/net_helper.sh +wait_for_listener() +{ + local port=$1 + local interval=$2 + local max_intervals=$3 + local protocol=tcp + local pattern + local i + + pattern=":$(printf "%04X" "${port}") " + + # for tcp protocol additionally check the socket state + [ "${protocol}" = "tcp" ] && pattern="${pattern}0A" + for i in $(seq "${max_intervals}"); do + if awk '{print $2" "$4}' /proc/net/"${protocol}"* | \ + grep -q "${pattern}"; then + break + fi + sleep "${interval}" + done +} + +vm_wait_for_listener() { + local port=$1 + + vm_ssh <<EOF +$(declare -f wait_for_listener) +wait_for_listener ${port} ${WAIT_PERIOD} ${WAIT_PERIOD_MAX} +EOF +} + +host_wait_for_listener() { + wait_for_listener ${TEST_HOST_PORT_LISTENER} ${WAIT_PERIOD} ${WAIT_PERIOD_MAX} +} + +__log_stdin() { + cat | awk '{ printf "%s:\t%s\n","'"${prefix}"'", $0 }' +} + +__log_args() { + echo "$*" | awk '{ printf "%s:\t%s\n","'"${prefix}"'", $0 }' +} + +log() { + local prefix="$1" + + shift + local redirect= + if [[ ${VERBOSE} -eq 0 ]]; then + redirect=/dev/null + else + redirect=/dev/stdout + fi + + if [[ "$#" -eq 0 ]]; then + __log_stdin | tee -a ${LOG} > ${redirect} + else + __log_args | tee -a ${LOG} > ${redirect} + fi +} + +log_setup() { + log "setup" "$@" +} + +log_host() { + local testname=$1 + + shift + log "test:${testname}:host" "$@" +} + +log_guest() { + local testname=$1 + + shift + log "test:${testname}:guest" "$@" +} + +tap_prefix() { + sed -e "s/^/${TAP_PREFIX}/" +} + +tap_output() { + if [[ ! -z "$TAP_PREFIX" ]]; then + read str + echo $str + fi +} + +test_vm_server_host_client() { + local testname="${FUNCNAME[0]#test_}" + + vm_ssh -- "${VSOCK_TEST}" \ + --mode=server \ + --control-port="${TEST_GUEST_PORT}" \ + --peer-cid=2 \ + 2>&1 | log_guest "${testname}" & + + vm_wait_for_listener ${TEST_GUEST_PORT} + + ${VSOCK_TEST} \ + --mode=client \ + --control-host=127.0.0.1 \ + --peer-cid="${VSOCK_CID}" \ + --control-port="${TEST_HOST_PORT}" 2>&1 | log_host "${testname}" + + return $? +} + +test_vm_client_host_server() { + local testname="${FUNCNAME[0]#test_}" + + ${VSOCK_TEST} \ + --mode "server" \ + --control-port "${TEST_HOST_PORT_LISTENER}" \ + --peer-cid "${VSOCK_CID}" 2>&1 | log_host "${testname}" & + + host_wait_for_listener + + vm_ssh -- "${VSOCK_TEST}" \ + --mode=client \ + --control-host=10.0.2.2 \ + --peer-cid=2 \ + --control-port="${TEST_HOST_PORT_LISTENER}" 2>&1 | log_guest "${testname}" + + return $? +} + +test_vm_loopback() { + local testname="${FUNCNAME[0]#test_}" + local port=60000 # non-forwarded local port + + vm_ssh -- ${VSOCK_TEST} \ + --mode=server \ + --control-port="${port}" \ + --peer-cid=1 2>&1 | log_guest "${testname}" & + + vm_wait_for_listener ${port} + + vm_ssh -- ${VSOCK_TEST} \ + --mode=client \ + --control-host="127.0.0.1" \ + --control-port="${port}" \ + --peer-cid=1 2>&1 | log_guest "${testname}" + + return $? +} + +run_test() { + local host_oops_cnt_before + local host_warn_cnt_before + local vm_oops_cnt_before + local vm_warn_cnt_before + local host_oops_cnt_after + local host_warn_cnt_after + local vm_oops_cnt_after + local vm_warn_cnt_after + local name + local rc + + host_oops_cnt_before=$(dmesg | grep -c -i 'Oops') + host_warn_cnt_before=$(dmesg --level=warn | wc -l) + vm_oops_cnt_before=$(vm_ssh -- dmesg | grep -c -i 'Oops') + vm_warn_cnt_before=$(vm_ssh -- dmesg --level=warn | wc -l) + + name=$(echo "${1}" | awk '{ print $1 }') + eval test_"${name}" + rc=$? + + host_oops_cnt_after=$(dmesg | grep -i 'Oops' | wc -l) + if [[ ${host_oops_cnt_after} -gt ${host_oops_cnt_before} ]]; then + echo "${name}: kernel oops detected on host" | log_host ${name} + rc=$KSFT_FAIL + fi + + host_warn_cnt_after=$(dmesg --level=warn | wc -l) + if [[ ${host_warn_cnt_after} -gt ${host_warn_cnt_before} ]]; then + echo "${name}: kernel warning detected on host" | log_host ${name} + rc=$KSFT_FAIL + fi + + vm_oops_cnt_after=$(vm_ssh -- dmesg | grep -i 'Oops' | wc -l) + if [[ ${vm_oops_cnt_after} -gt ${vm_oops_cnt_before} ]]; then + echo "${name}: kernel oops detected on vm" | log_host ${name} + rc=$KSFT_FAIL + fi + + vm_warn_cnt_after=$(vm_ssh -- dmesg --level=warn | wc -l) + if [[ ${vm_warn_cnt_after} -gt ${vm_warn_cnt_before} ]]; then + echo "${name}: kernel warning detected on vm" | log_host ${name} + rc=$KSFT_FAIL + fi + + return ${rc} +} + +QEMU="qemu-system-$(uname -m)" + +while getopts :hvsq: o +do + case $o in + v) VERBOSE=1;; + q) QEMU=$OPTARG;; + h|*) usage;; + esac +done +shift $((OPTIND-1)) + +trap cleanup EXIT + +if [[ ${#} -eq 0 ]]; then + ARGS=(${TEST_NAMES[@]}) +else + ARGS=($@) +fi + +check_args "${ARGS[@]}" +check_deps + +echo "TAP version 13" | tap_output +echo "1..${#ARGS[@]}" | tap_output + +log_setup "Booting up VM" +vm_start +vm_wait_for_ssh +log_setup "VM booted up" + +cnt_pass=0 +cnt_fail=0 +cnt_skip=0 +cnt_total=0 +exitcode=0 +for arg in "${ARGS[@]}"; do + run_test "${arg}" + rc=$? + if [[ ${rc} == $KSFT_PASS ]]; then + cnt_pass=$(( cnt_pass + 1 )) + echo "[PASS]" | tap_prefix + echo "ok ${cnt_total} ${arg}" | tap_output + elif [[ ${rc} == $KSFT_SKIP ]]; then + cnt_skip=$(( cnt_skip + 1 )) + echo "[SKIP]" | tap_prefix + echo "ok ${cnt_total} ${arg} # SKIP" | tap_output + exitcode=$KSFT_SKIP + elif [[ ${rc} == $KSFT_FAIL ]]; then + cnt_fail=$(( cnt_fail + 1 )) + echo "[FAIL]" | tap_prefix + echo "not ok ${cnt_total} ${arg} # exit=$rc" | tap_output + exitcode=$KSFT_FAIL + fi + cnt_total=$(( cnt_total + 1 )) +done + +echo "SUMMARY: PASS=${cnt_pass} SKIP=${cnt_skip} FAIL=${cnt_fail}" | tap_prefix + +if [ $((cnt_pass + cnt_skip)) -eq "$KSFT_NUM_TESTS" ]; then + exit "$KSFT_PASS" +else + exit "$KSFT_FAIL" +fi --- base-commit: 8066e388be48f1ad62b0449dc1d31a25489fa12a change-id: 20250325-vsock-vmtest-b3a21d2102c2 Best regards, -- Bobby Eshleman <bobbyeshleman(a)gmail.com>

6 months, 3 weeks

2
2
0 0

[PATCH net-next v6] selftests/vsock: add initial vmtest.sh for vsock

by Bobby Eshleman

This commit introduces a new vmtest.sh runner for vsock. It uses virtme-ng/qemu to run tests in a VM. The tests validate G2H, H2G, and loopback. The testing tools from tools/testing/vsock/ are reused. Currently, only vsock_test is used. VMCI and hyperv support is automatically built, though not used. Only tested on x86. To run: $ make -C tools/testing/selftests TARGETS=vsock $ tools/testing/selftests/vsock/vmtest.sh or $ make -C tools/testing/selftests TARGETS=vsock run_tests Example runs: $ ./tools/testing/selftests/vsock/vmtest.sh TAP version 13 1..3 not ok 0 vm_server_host_client # exit=1 ok 1 vm_client_host_server ok 2 vm_loopback 1..3 $ ./tools/testing/selftests/vsock/vmtest.sh vm_loopback TAP version 13 1..1 ok 0 vm_loopback 1..1 Future work can include vsock_diag_test. The tap output style copies mm's run_vmtests.sh. Because vsock requires a VM to test anything other than loopback, this patch adds vmtest.sh as a kselftest itself. This is different than other systems that have a "vmtest.sh", where it is used as a utility script to spin up a VM to run the selftests as a guest (but isn't hooked into kselftest). Testing in NIPA is still WIP. Signed-off-by: Bobby Eshleman <bobbyeshleman(a)gmail.com> --- Changes in v6: - add make cmd in commit message in vmtest.sh example (Stefano) - check nonzero size of QEMU_PIDFILE using -s conditional (Stefano) - display log file path after tests so it is easier to find amongst other random names - cleanup qemu pidfile if qemu is unable to remove it - make oops/warning failures more obvious with 'FAIL' prefix in log (simply saying 'detected' wasn't clear enough to identify failing condition) - Link to v5: https://lore.kernel.org/r/20250513-vsock-vmtest-v5-1-4e75c4a45ceb@gmail.com Changes in v5: - make log file a tmpfile (Paolo) - make sure both default and user defined QEMU gets handled by the dependency check (Paolo) - increased VM boot up timeout from 1m to 3m for slow hosts (Paolo) - rename vm_setup -> vm_start (Paolo) - derive wait_for_listener from selftests/net/net_helper.sh to removes ss usage - Remove unused 'unset IFS' line (Paolo) - leave space after variable declarations (Paolo) - make QEMU_PIDFILE a tmp file (Paolo) - make everything readonly that is only read (Paolo) - source ktap_helpers.sh for KSFT_PASS and friends (Paolo) - don't check for timeout util (Paolo) - add missing usage string for -q qemu arg - add tap prefix to SUMMARY line since it isn't part of TAP protocol - exit with the correct status code based on failure/pass counts - Link to v4: https://lore.kernel.org/r/20250507-vsock-vmtest-v4-1-6e2a97262cd6@gmail.com Changes in v4: - do not use special tab delimiter for help string parsing (Stefano + Paolo) - fix paths for when installing kselftest and running out-of-tree (Paolo) - change vng to using running kernel instead of compiled kernel (Paolo) - use multi-line string for QEMU_OPTS (Stefano) - change timeout to 300s (Paolo) - skip if tools are not found and use kselftests status codes (Paolo) - remove build from vmtest.sh (Paolo) - change 2222 -> SSH_HOST_PORT (Stefano) - add tap-format output - add vmtest.log to gitignore - check for vsock_test binary and remind user to build it if missing - create a proper build in makefile - style fixes - add ssh, timeout, and pkill to dependency check, just in case - fix numerical comparison in conditionals - check qemu pidfile exists before proceeding (avoid wasting time waiting for ssh) - fix tracking of pass/fail bug - fix stderr redirection bug - Link to v3: https://lore.kernel.org/r/20250428-vsock-vmtest-v3-1-181af6163f3e@gmail.com Changes in v3: - use common conditional syntax for checking variables - use return value instead of global rc - fix typo TEST_HOST_LISTENER_PORT -> TEST_HOST_PORT_LISTENER - use SIGTERM instead of SIGKILL on cleanup - use peer-cid=1 for loopback - change sleep delay times into globals - fix test_vm_loopback logging - add test selection in arguments - make QEMU an argument - check that vng binary is on path - use QEMU variable - change <tab><backslash> to <space><backslash> - fix hardcoded file paths - add comment in commit msg about script that vmtest.sh was based off of - Add tools/testing/selftest/vsock/Makefile for kselftest - Link to v2: https://lore.kernel.org/r/20250417-vsock-vmtest-v2-1-3901a27331e8@gmail.com Changes in v2: - add kernel oops and warnings checker - change testname variable to use FUNCNAME - fix spacing in test_vm_server_host_client - add -s skip build option to vmtest.sh - add test_vm_loopback - pass port to vm_wait_for_listener - fix indentation in vmtest.sh - add vmci and hyperv to config - changed whitespace from tabs to spaces in help string - Link to v1: https://lore.kernel.org/r/20250410-vsock-vmtest-v1-1-f35a81dab98c@gmail.com --- MAINTAINERS | 1 + tools/testing/selftests/vsock/.gitignore | 2 + tools/testing/selftests/vsock/Makefile | 16 ++ tools/testing/selftests/vsock/config | 114 ++++++++ tools/testing/selftests/vsock/settings | 1 + tools/testing/selftests/vsock/vmtest.sh | 448 +++++++++++++++++++++++++++++++ 6 files changed, 582 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 657a67f9031ef7798c19ac63e6383d4cb18a9e1f..3fbdd7bbfce7196a3cc7db70203317c6bd0e51fd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -25751,6 +25751,7 @@ F: include/uapi/linux/vm_sockets.h F: include/uapi/linux/vm_sockets_diag.h F: include/uapi/linux/vsockmon.h F: net/vmw_vsock/ +F: tools/testing/selftests/vsock/ F: tools/testing/vsock/ VMALLOC diff --git a/tools/testing/selftests/vsock/.gitignore b/tools/testing/selftests/vsock/.gitignore new file mode 100644 index 0000000000000000000000000000000000000000..9c5bf379480f829a14713d5f5dc7d525bc272e84 --- /dev/null +++ b/tools/testing/selftests/vsock/.gitignore @@ -0,0 +1,2 @@ +vmtest.log +vsock_test diff --git a/tools/testing/selftests/vsock/Makefile b/tools/testing/selftests/vsock/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..7ab4970e5e8a019be33f96a36f95c00573d7bfcf --- /dev/null +++ b/tools/testing/selftests/vsock/Makefile @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 + +CURDIR := $(abspath .) +TOOLSDIR := $(abspath ../../..) + +$(OUTPUT)/vsock_test: $(TOOLSDIR)/testing/vsock/vsock_test + install -m 755 $< $@ + +$(TOOLSDIR)/testing/vsock/vsock_test: + $(MAKE) -C $(TOOLSDIR)/testing/vsock vsock_test + +TEST_PROGS += vmtest.sh +TEST_GEN_FILES := vsock_test + +include ../lib.mk + diff --git a/tools/testing/selftests/vsock/config b/tools/testing/selftests/vsock/config new file mode 100644 index 0000000000000000000000000000000000000000..3bffaaf98fff92dc0e3bc1286afa3d8d5d52f4c7 --- /dev/null +++ b/tools/testing/selftests/vsock/config @@ -0,0 +1,114 @@ +CONFIG_BLK_DEV_INITRD=y +CONFIG_BPF=y +CONFIG_BPF_SYSCALL=y +CONFIG_BPF_JIT=y +CONFIG_HAVE_EBPF_JIT=y +CONFIG_BPF_EVENTS=y +CONFIG_FTRACE_SYSCALLS=y +CONFIG_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_DYNAMIC_FTRACE=y +CONFIG_HAVE_KPROBES=y +CONFIG_KPROBES=y +CONFIG_KPROBE_EVENTS=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_UPROBES=y +CONFIG_UPROBE_EVENTS=y +CONFIG_DEBUG_FS=y +CONFIG_FW_CFG_SYSFS=y +CONFIG_FW_CFG_SYSFS_CMDLINE=y +CONFIG_DRM=y +CONFIG_DRM_VIRTIO_GPU=y +CONFIG_DRM_VIRTIO_GPU_KMS=y +CONFIG_DRM_BOCHS=y +CONFIG_VIRTIO_IOMMU=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_PCI=y +CONFIG_SND_INTEL8X0=y +CONFIG_SND_HDA_CODEC_REALTEK=y +CONFIG_SECURITYFS=y +CONFIG_CGROUP_BPF=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_XZ=y +CONFIG_SQUASHFS_ZSTD=y +CONFIG_FUSE_FS=y +CONFIG_SERIO=y +CONFIG_PCI=y +CONFIG_INPUT=y +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_X86_VERBOSE_BOOTUP=y +CONFIG_VGA_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_VESA=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_DRV_CMOS=y +CONFIG_HYPERVISOR_GUEST=y +CONFIG_PARAVIRT=y +CONFIG_KVM_GUEST=y +CONFIG_KVM=y +CONFIG_KVM_INTEL=y +CONFIG_KVM_AMD=y +CONFIG_VSOCKETS=y +CONFIG_VSOCKETS_DIAG=y +CONFIG_VSOCKETS_LOOPBACK=y +CONFIG_VMWARE_VMCI_VSOCKETS=y +CONFIG_VIRTIO_VSOCKETS=y +CONFIG_VIRTIO_VSOCKETS_COMMON=y +CONFIG_HYPERV_VSOCKETS=y +CONFIG_VMWARE_VMCI=y +CONFIG_VHOST_VSOCK=y +CONFIG_HYPERV=y +CONFIG_UEVENT_HELPER=n +CONFIG_VIRTIO=y +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_BALLOON=y +CONFIG_NET=y +CONFIG_NET_CORE=y +CONFIG_NETDEVICES=y +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_INET=y +CONFIG_NET_9P=y +CONFIG_NET_9P_VIRTIO=y +CONFIG_9P_FS=y +CONFIG_VIRTIO_NET=y +CONFIG_CMDLINE_OVERRIDE=n +CONFIG_BINFMT_SCRIPT=y +CONFIG_SHMEM=y +CONFIG_TMPFS=y +CONFIG_UNIX=y +CONFIG_MODULE_SIG_FORCE=n +CONFIG_DEVTMPFS=y +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_UNIX98_PTYS=y +CONFIG_EARLY_PRINTK=y +CONFIG_INOTIFY_USER=y +CONFIG_BLOCK=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_SCSI=y +CONFIG_SCSI_VIRTIO=y +CONFIG_BLK_DEV_SD=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +CONFIG_I6300ESB_WDT=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y +CONFIG_OVERLAY_FS=y +CONFIG_DAX=y +CONFIG_DAX_DRIVER=y +CONFIG_FS_DAX=y +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTREMOVE=y +CONFIG_ZONE_DEVICE=y +CONFIG_FUSE_FS=y +CONFIG_VIRTIO_FS=y +CONFIG_VSOCKETS=y +CONFIG_VIRTIO_VSOCKETS=y diff --git a/tools/testing/selftests/vsock/settings b/tools/testing/selftests/vsock/settings new file mode 100644 index 0000000000000000000000000000000000000000..694d70710ff08ac9fc91e9ecb5dbdadcf051f019 --- /dev/null +++ b/tools/testing/selftests/vsock/settings @@ -0,0 +1 @@ +timeout=300 diff --git a/tools/testing/selftests/vsock/vmtest.sh b/tools/testing/selftests/vsock/vmtest.sh new file mode 100755 index 0000000000000000000000000000000000000000..e92e72a2c6480d918351bdd49baf106be4a29785 --- /dev/null +++ b/tools/testing/selftests/vsock/vmtest.sh @@ -0,0 +1,448 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (c) 2025 Meta Platforms, Inc. and affiliates +# +# Dependencies: +# * virtme-ng +# * busybox-static (used by virtme-ng) +# * qemu (used by virtme-ng) + +readonly SCRIPT_DIR="$(cd -P -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd -P)" + +source ${SCRIPT_DIR}/../kselftest/ktap_helpers.sh + +readonly TAP_PREFIX="# " +readonly VSOCK_TEST=${SCRIPT_DIR}/vsock_test + +readonly TEST_GUEST_PORT=51000 +readonly TEST_HOST_PORT=50000 +readonly TEST_HOST_PORT_LISTENER=50001 +readonly SSH_GUEST_PORT=22 +readonly SSH_HOST_PORT=2222 +readonly VSOCK_CID=1234 +readonly WAIT_PERIOD=3 +readonly WAIT_PERIOD_MAX=60 +readonly WAIT_TOTAL=$(( WAIT_PERIOD * WAIT_PERIOD_MAX )) +readonly QEMU_PIDFILE=$(mktemp /tmp/qemu_vsock_vmtest_XXXX.pid) + +# virtme-ng offers a netdev for ssh when using "--ssh", but we also need a +# control port forwarded for vsock_test. Because virtme-ng doesn't support +# adding an additional port to forward to the device created from "--ssh" and +# virtme-init mistakenly sets identical IPs to the ssh device and additional +# devices, we instead opt out of using --ssh, add the device manually, and also +# add the kernel cmdline options that virtme-init uses to setup the interface. +readonly QEMU_TEST_PORT_FWD="hostfwd=tcp::${TEST_HOST_PORT}-:${TEST_GUEST_PORT}" +readonly QEMU_SSH_PORT_FWD="hostfwd=tcp::${SSH_HOST_PORT}-:${SSH_GUEST_PORT}" +readonly QEMU_OPTS="\ + -netdev user,id=n0,${QEMU_TEST_PORT_FWD},${QEMU_SSH_PORT_FWD} \ + -device virtio-net-pci,netdev=n0 \ + -device vhost-vsock-pci,guest-cid=${VSOCK_CID} \ + --pidfile ${QEMU_PIDFILE} \ +" +readonly KERNEL_CMDLINE="virtme.dhcp net.ifnames=0 biosdevname=0 virtme.ssh virtme_ssh_user=$USER" +readonly LOG=$(mktemp /tmp/vsock_vmtest_XXXX.log) +readonly TEST_NAMES=(vm_server_host_client vm_client_host_server vm_loopback) +readonly TEST_DESCS=( + "Run vsock_test in server mode on the VM and in client mode on the host." + "Run vsock_test in client mode on the VM and in server mode on the host." + "Run vsock_test using the loopback transport in the VM." +) + +VERBOSE=0 + +usage() { + local name + local desc + local i + + echo + echo "$0 [OPTIONS] [TEST]..." + echo "If no TEST argument is given, all tests will be run." + echo + echo "Options" + echo " -v: verbose output" + echo " -q: set the path to or name of qemu binary" + echo + echo "Available tests" + + for ((i = 0; i < ${#TEST_NAMES[@]}; i++)); do + name=${TEST_NAMES[${i}]} + desc=${TEST_DESCS[${i}]} + printf "\t%-35s%-35s\n" "${name}" "${desc}" + done + echo + + exit 1 +} + +die() { + echo "$*" >&2 + exit ${KSFT_FAIL} +} + +vm_ssh() { + ssh -q -o UserKnownHostsFile=/dev/null -p ${SSH_HOST_PORT} localhost $* + return $? +} + +cleanup() { + if [[ -s "${QEMU_PIDFILE}" ]]; then + pkill -SIGTERM -F ${QEMU_PIDFILE} 2>&1 > /dev/null + fi + + # If failure occurred during or before qemu start up, then we need + # to clean this up ourselves. + if [[ -e "${QEMU_PIDFILE}" ]]; then + rm "${QEMU_PIDFILE}" + fi +} + +check_args() { + local found + + for arg in "$@"; do + found=0 + for name in "${TEST_NAMES[@]}"; do + if [[ "${name}" = "${arg}" ]]; then + found=1 + break + fi + done + + if [[ "${found}" -eq 0 ]]; then + echo "${arg} is not an available test" >&2 + usage + fi + done + + for arg in "$@"; do + if ! command -v > /dev/null "test_${arg}"; then + echo "Test ${arg} not found" >&2 + usage + fi + done +} + +check_deps() { + for dep in vng ${QEMU} busybox pkill ssh; do + if [[ ! -x "$(command -v ${dep})" ]]; then + echo -e "skip: dependency ${dep} not found!\n" + exit ${KSFT_SKIP} + fi + done + + if [[ ! -x $(command -v ${VSOCK_TEST}) ]]; then + printf "skip: ${VSOCK_TEST} not found!" + printf " Please build the kselftest vsock target.\n" + exit ${KSFT_SKIP} + fi +} + +vm_start() { + local VNG_OPTS="" + local logfile=/dev/null + local qemu + + qemu=$(command -v ${QEMU}) + + if [[ "${VERBOSE}" = 1 ]]; then + VNG_OPTS="--verbose" + logfile=/dev/stdout + fi + vng \ + $VNG_OPTS \ + --run \ + --qemu-opts="${QEMU_OPTS}" \ + --qemu="${qemu}" \ + --user root \ + --append "${KERNEL_CMDLINE}" \ + --rw &> ${logfile} & + + timeout ${WAIT_TOTAL} \ + bash -c 'while [[ ! -s '"${QEMU_PIDFILE}"' ]]; do sleep 1; done; exit 0' + if [[ ! $? -eq 0 ]]; then + die "failed to boot VM" + fi +} + +vm_wait_for_ssh() { + local i + + i=0 + while [[ true ]]; do + if [[ ${i} -gt ${WAIT_PERIOD_MAX} ]]; then + die "Timed out waiting for guest ssh" + fi + vm_ssh -- true + if [[ $? -eq 0 ]]; then + break + fi + i=$(( i + 1 )) + sleep ${WAIT_PERIOD} + done +} + +# derived from selftests/net/net_helper.sh +wait_for_listener() +{ + local port=$1 + local interval=$2 + local max_intervals=$3 + local protocol=tcp + local pattern + local i + + pattern=":$(printf "%04X" "${port}") " + + # for tcp protocol additionally check the socket state + [ "${protocol}" = "tcp" ] && pattern="${pattern}0A" + for i in $(seq "${max_intervals}"); do + if awk '{print $2" "$4}' /proc/net/"${protocol}"* | \ + grep -q "${pattern}"; then + break + fi + sleep "${interval}" + done +} + +vm_wait_for_listener() { + local port=$1 + + vm_ssh <<EOF +$(declare -f wait_for_listener) +wait_for_listener ${port} ${WAIT_PERIOD} ${WAIT_PERIOD_MAX} +EOF +} + +host_wait_for_listener() { + wait_for_listener ${TEST_HOST_PORT_LISTENER} ${WAIT_PERIOD} ${WAIT_PERIOD_MAX} +} + +__log_stdin() { + cat | awk '{ printf "%s:\t%s\n","'"${prefix}"'", $0 }' +} + +__log_args() { + echo "$*" | awk '{ printf "%s:\t%s\n","'"${prefix}"'", $0 }' +} + +log() { + local prefix="$1" + + shift + local redirect= + if [[ ${VERBOSE} -eq 0 ]]; then + redirect=/dev/null + else + redirect=/dev/stdout + fi + + if [[ "$#" -eq 0 ]]; then + __log_stdin | tee -a ${LOG} > ${redirect} + else + __log_args | tee -a ${LOG} > ${redirect} + fi +} + +log_setup() { + log "setup" "$@" +} + +log_host() { + local testname=$1 + + shift + log "test:${testname}:host" "$@" +} + +log_guest() { + local testname=$1 + + shift + log "test:${testname}:guest" "$@" +} + +tap_prefix() { + sed -e "s/^/${TAP_PREFIX}/" +} + +tap_output() { + if [[ ! -z "$TAP_PREFIX" ]]; then + read str + echo $str + fi +} + +test_vm_server_host_client() { + local testname="${FUNCNAME[0]#test_}" + + vm_ssh -- "${VSOCK_TEST}" \ + --mode=server \ + --control-port="${TEST_GUEST_PORT}" \ + --peer-cid=2 \ + 2>&1 | log_guest "${testname}" & + + vm_wait_for_listener ${TEST_GUEST_PORT} + + ${VSOCK_TEST} \ + --mode=client \ + --control-host=127.0.0.1 \ + --peer-cid="${VSOCK_CID}" \ + --control-port="${TEST_HOST_PORT}" 2>&1 | log_host "${testname}" + + return $? +} + +test_vm_client_host_server() { + local testname="${FUNCNAME[0]#test_}" + + ${VSOCK_TEST} \ + --mode "server" \ + --control-port "${TEST_HOST_PORT_LISTENER}" \ + --peer-cid "${VSOCK_CID}" 2>&1 | log_host "${testname}" & + + host_wait_for_listener + + vm_ssh -- "${VSOCK_TEST}" \ + --mode=client \ + --control-host=10.0.2.2 \ + --peer-cid=2 \ + --control-port="${TEST_HOST_PORT_LISTENER}" 2>&1 | log_guest "${testname}" + + return $? +} + +test_vm_loopback() { + local testname="${FUNCNAME[0]#test_}" + local port=60000 # non-forwarded local port + + vm_ssh -- ${VSOCK_TEST} \ + --mode=server \ + --control-port="${port}" \ + --peer-cid=1 2>&1 | log_guest "${testname}" & + + vm_wait_for_listener ${port} + + vm_ssh -- ${VSOCK_TEST} \ + --mode=client \ + --control-host="127.0.0.1" \ + --control-port="${port}" \ + --peer-cid=1 2>&1 | log_guest "${testname}" + + return $? +} + +run_test() { + local host_oops_cnt_before + local host_warn_cnt_before + local vm_oops_cnt_before + local vm_warn_cnt_before + local host_oops_cnt_after + local host_warn_cnt_after + local vm_oops_cnt_after + local vm_warn_cnt_after + local name + local rc + + host_oops_cnt_before=$(dmesg | grep -c -i 'Oops') + host_warn_cnt_before=$(dmesg --level=warn | wc -l) + vm_oops_cnt_before=$(vm_ssh -- dmesg | grep -c -i 'Oops') + vm_warn_cnt_before=$(vm_ssh -- dmesg --level=warn | wc -l) + + name=$(echo "${1}" | awk '{ print $1 }') + eval test_"${name}" + rc=$? + + host_oops_cnt_after=$(dmesg | grep -i 'Oops' | wc -l) + if [[ ${host_oops_cnt_after} -gt ${host_oops_cnt_before} ]]; then + echo "FAIL: kernel oops detected on host" | log_host ${name} + rc=$KSFT_FAIL + fi + + host_warn_cnt_after=$(dmesg --level=warn | wc -l) + if [[ ${host_warn_cnt_after} -gt ${host_warn_cnt_before} ]]; then + echo "FAIL: kernel warning detected on host" | log_host ${name} + rc=$KSFT_FAIL + fi + + vm_oops_cnt_after=$(vm_ssh -- dmesg | grep -i 'Oops' | wc -l) + if [[ ${vm_oops_cnt_after} -gt ${vm_oops_cnt_before} ]]; then + echo "FAIL: kernel oops detected on vm" | log_host ${name} + rc=$KSFT_FAIL + fi + + vm_warn_cnt_after=$(vm_ssh -- dmesg --level=warn | wc -l) + if [[ ${vm_warn_cnt_after} -gt ${vm_warn_cnt_before} ]]; then + echo "FAIL: kernel warning detected on vm" | log_host ${name} + rc=$KSFT_FAIL + fi + + return ${rc} +} + +QEMU="qemu-system-$(uname -m)" + +while getopts :hvsq: o +do + case $o in + v) VERBOSE=1;; + q) QEMU=$OPTARG;; + h|*) usage;; + esac +done +shift $((OPTIND-1)) + +trap cleanup EXIT + +if [[ ${#} -eq 0 ]]; then + ARGS=(${TEST_NAMES[@]}) +else + ARGS=($@) +fi + +check_args "${ARGS[@]}" +check_deps + +echo "TAP version 13" | tap_output +echo "1..${#ARGS[@]}" | tap_output + +log_setup "Booting up VM" +vm_start +vm_wait_for_ssh +log_setup "VM booted up" + +cnt_pass=0 +cnt_fail=0 +cnt_skip=0 +cnt_total=0 +exitcode=0 +for arg in "${ARGS[@]}"; do + run_test "${arg}" + rc=$? + if [[ ${rc} == $KSFT_PASS ]]; then + cnt_pass=$(( cnt_pass + 1 )) + echo "[PASS]" | tap_prefix + echo "ok ${cnt_total} ${arg}" | tap_output + elif [[ ${rc} == $KSFT_SKIP ]]; then + cnt_skip=$(( cnt_skip + 1 )) + echo "[SKIP]" | tap_prefix + echo "ok ${cnt_total} ${arg} # SKIP" | tap_output + exitcode=$KSFT_SKIP + elif [[ ${rc} == $KSFT_FAIL ]]; then + cnt_fail=$(( cnt_fail + 1 )) + echo "[FAIL]" | tap_prefix + echo "not ok ${cnt_total} ${arg} # exit=$rc" | tap_output + exitcode=$KSFT_FAIL + fi + cnt_total=$(( cnt_total + 1 )) +done + +echo "SUMMARY: PASS=${cnt_pass} SKIP=${cnt_skip} FAIL=${cnt_fail}" | tap_prefix +echo "Log: ${LOG}" | tap_prefix + +if [ $((cnt_pass + cnt_skip)) -eq "$KSFT_NUM_TESTS" ]; then + exit "$KSFT_PASS" +else + exit "$KSFT_FAIL" +fi --- base-commit: 8066e388be48f1ad62b0449dc1d31a25489fa12a change-id: 20250325-vsock-vmtest-b3a21d2102c2 Best regards, -- Bobby Eshleman <bobbyeshleman(a)gmail.com>

6 months, 3 weeks

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror