- Linux-kselftest-mirror - lists.linaro.org

[PATCH v17 00/15] PCI: EP: Add RC-to-EP doorbell with platform MSI controller

by Frank Li

┌────────────┐ ┌───────────────────────────────────┐ ┌────────────────┐ │ │ │ │ │ │ │ │ │ PCI Endpoint │ │ PCI Host │ │ │ │ │ │ │ │ │◄──┤ 1.platform_msi_domain_alloc_irqs()│ │ │ │ │ │ │ │ │ │ MSI ├──►│ 2.write_msi_msg() ├──►├─BAR<n> │ │ Controller │ │ update doorbell register address│ │ │ │ │ │ for BAR │ │ │ │ │ │ │ │ 3. Write BAR<n>│ │ │◄──┼───────────────────────────────────┼───┤ │ │ │ │ │ │ │ │ ├──►│ 4.Irq Handle │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ └────────────┘ └───────────────────────────────────┘ └────────────────┘ This patches based on old https://lore.kernel.org/imx/20221124055036.1630573-1-Frank.Li@nxp.com/ Original patch only target to vntb driver. But actually it is common method. This patches add new API to pci-epf-core, so any EP driver can use it. Previous v2 discussion here. https://lore.kernel.org/imx/20230911220920.1817033-1-Frank.Li@nxp.com/ Changes in v17: - move document part to pci-ep.yaml - Link to v16: https://lore.kernel.org/r/20250404-ep-msi-v16-0-d4919d68c0d0@nxp.com Changes in v16: - remove arm64: dts: imx95-19x19-evk: Add PCIe1 endpoint function overlay file because there are better patches, which under review. - Add document for pcie-ep msi-map usage - other change to see each patch's change log About IMMUTABLE (No change for this part, tglx provide feedback) > - This IMMUTABLE thing serves no purpose, because you don't randomly > plug this end-point block on any MSI controller. They come as part > of an SoC. "Yes and no. The problem is that the EP implementation is meant to be a generic library and while GIC-ITS guarantees immutability of the address/data pair after setup, there are architectures (x86, loongson, riscv) where the base MSI controller does not and immutability is only achieved when interrupt remapping is enabled. The latter can be disabled at boot-time and then the EP implementation becomes a lottery across affinity changes. That was my concern about this library implementation and that's why I asked for a mechanism to ensure that the underlying irqdomain provides a immutable address/data pair. So it does not matter for GIC-ITS, but in the larger picture it matters. Thanks, tglx " So it does not matter for GIC-ITS, but in the larger picture it matters. - Link to v15: https://lore.kernel.org/r/20250211-ep-msi-v15-0-bcacc1f2b1a9@nxp.com Changes in v15: - rebase to v6.14-rc1 - fix build issue find by kernel test robot - Link to v14: https://lore.kernel.org/r/20250207-ep-msi-v14-0-9671b136f2b8@nxp.com Changes in v14: Marc Zyngier raised concerns about adding DOMAIN_BUS_DEVICE_PCI_EP_MSI. As a result, the approach has been reverted to the v9 method. However, there are several improvements: MSI now supports msi-map in addition to msi-parent. - The struct device: id is used as the endpoint function (EPF) device identity to map to the stream ID (sideband information). - The EPC device tree source (DTS) utilizes msi-map to provide such information. - The EPF device's of_node is set to the EPC controller’s node. This approach is commonly used for multi-function device (MFD) platform child devices, allowing them to inherit properties from the MFD device’s DTS, such as reset-cells and gpio-cells. This method is well-suited for the current case, as the EPF is inherently created/binded to the EPC and should inherit the EPC’s DTS node properties. Additionally: Since the basic IMX95 LUT support has already been merged into the mainline, a DTS and driver increment patch is added to complete the solution. The patch is rebased onto the latest linux-next tree and aligned with the new pcitest framework. - Link to v13: https://lore.kernel.org/r/20241218-ep-msi-v13-0-646e2192dc24@nxp.com Changes in v13: - Change to use DOMAIN_BUS_PCI_DEVICE_EP_MSI - Change request id as func | vfunc << 3 - Remove IRQ_DOMAIN_MSI_IMMUTABLE Thomas Gleixner: I hope capture all your points in review comments. If missed, let me know. - Link to v12: https://lore.kernel.org/r/20241211-ep-msi-v12-0-33d4532fa520@nxp.com Changes in v12: - Change to use IRQ_DOMAIN_MSI_IMMUTABLE and add help function irq_domain_msi_is_immuatble(). - split PCI: endpoint: pci-ep-msi: Add MSI address/data pair mutable check to 3 patches - Link to v11: https://lore.kernel.org/r/20241209-ep-msi-v11-0-7434fa8397bd@nxp.com Changes in v11: - Change to use MSI_FLAG_MSG_IMMUTABLE - Link to v10: https://lore.kernel.org/r/20241204-ep-msi-v10-0-87c378dbcd6d@nxp.com Changes in v10: Thomas Gleixner: There are big change in pci-ep-msi.c. I am sure if go on the corrent path. The key improvement is remove only 1 function devices's limitation. I use new patch for imutable check, which relative additional feature compared to base enablement patch. - Remove patch Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all() - Add new patch irqchip/gic-v3-its: Avoid overwriting msi_prepare callback if provided by msi_domain_info - Remove only support 1 endpoint function limiation. - Create one MSI domain for each endpoint function devices. - Use "msi-map" in pci ep controler node, instead of of msi-parent. first argument is (func_no << 8 | vfunc_no) - Link to v9: https://lore.kernel.org/r/20241203-ep-msi-v9-0-a60dbc3f15dd@nxp.com Changes in v9 - Add patch platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all() - Remove patch PCI: endpoint: Add pci_epc_get_fn() API for customizable filtering - Remove API pci_epf_align_inbound_addr_lo_hi - Move doorbell_alloc in to doorbell_enable function. - Link to v8: https://lore.kernel.org/r/20241116-ep-msi-v8-0-6f1f68ffd1bb@nxp.com Changes in v8: - update helper function name to pci_epf_align_inbound_addr() - Link to v7: https://lore.kernel.org/r/20241114-ep-msi-v7-0-d4ac7aafbd2c@nxp.com Changes in v7: - Add helper function pci_epf_align_addr(); - Link to v6: https://lore.kernel.org/r/20241112-ep-msi-v6-0-45f9722e3c2a@nxp.com Changes in v6: - change doorbell_addr to doorbell_offset - use round_down() - add Niklas's test by tag - rebase to pci/endpoint - Link to v5: https://lore.kernel.org/r/20241108-ep-msi-v5-0-a14951c0d007@nxp.com Changes in v5: - Move request_irq to epf test function driver for more flexiable user case - Add fixed size bar handler - Some minor improvememtn to see each patches's changelog. - Link to v4: https://lore.kernel.org/r/20241031-ep-msi-v4-0-717da2d99b28@nxp.com Changes in v4: - Remove patch genirq/msi: Add cleanup guard define for msi_lock_descs()/msi_unlock_descs() - Use new method to avoid compatible problem. Add new command DOORBELL_ENABLE and DOORBELL_DISABLE. pcitest -B send DOORBELL_ENABLE first, EP test function driver try to remap one of BAR_N (except test register bar) to ITS MSI MMIO space. Old driver don't support new command, so failure return, not side effect. After test, DOORBELL_DISABLE command send out to recover original map, so pcitest bar test can pass as normal. - Other detail change see each patches's change log - Link to v3: https://lore.kernel.org/r/20241015-ep-msi-v3-0-cedc89a16c1a@nxp.com Change from v2 to v3 - Fixed manivannan's comments - Move common part to pci-ep-msi.c and pci-ep-msi.h - rebase to 6.12-rc1 - use RevID to distingiush old version mkdir /sys/kernel/config/pci_ep/functions/pci_epf_test/func1 echo 16 > /sys/kernel/config/pci_ep/functions/pci_epf_test/func1/msi_interrupts echo 0x080c > /sys/kernel/config/pci_ep/functions/pci_epf_test/func1/deviceid echo 0x1957 > /sys/kernel/config/pci_ep/functions/pci_epf_test/func1/vendorid echo 1 > /sys/kernel/config/pci_ep/functions/pci_epf_test/func1/revid ^^^^^^ to enable platform msi support. ln -s /sys/kernel/config/pci_ep/functions/pci_epf_test/func1 /sys/kernel/config/pci_ep/controllers/4c380000.pcie-ep - use new device ID, which identify support doorbell to avoid broken compatility. Enable doorbell support only for PCI_DEVICE_ID_IMX8_DB, while other devices keep the same behavior as before. EP side RC with old driver RC with new driver PCI_DEVICE_ID_IMX8_DB no probe doorbell enabled Other device ID doorbell disabled* doorbell disabled* * Behavior remains unchanged. Change from v1 to v2 - Add missed patch for endpont/pci-epf-test.c - Move alloc and free to epc driver from epf. - Provide general help function for EPC driver to alloc platform msi irq. - Fixed manivannan's comments. Signed-off-by: Frank Li <Frank.Li(a)nxp.com> --- Frank Li (15): platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all() irqdomain: Add IRQ_DOMAIN_FLAG_MSI_IMMUTABLE and irq_domain_is_msi_immutable() irqchip/gic-v3-its: Set IRQ_DOMAIN_FLAG_MSI_IMMUTABLE for ITS dt-bindings: PCI: pci-ep: Add support for iommu-map and msi-map irqchip/gic-v3-its: Add support for device tree msi-map and msi-mask PCI: endpoint: Set ID and of_node for function driver PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller PCI: endpoint: pci-ep-msi: Add MSI address/data pair mutable check PCI: endpoint: Add pci_epf_align_inbound_addr() helper for address alignment PCI: endpoint: pci-epf-test: Add doorbell test support misc: pci_endpoint_test: Add doorbell test case selftests: pci_endpoint: Add doorbell test case pci: imx6: Add helper function imx_pcie_add_lut_by_rid() pci: imx6: Add LUT setting for MSI/IOMMU in Endpoint mode arm64: dts: imx95: Add msi-map for pci-ep device Documentation/devicetree/bindings/pci/pci-ep.yaml | 67 ++++++++++ arch/arm64/boot/dts/freescale/imx95.dtsi | 1 + drivers/base/platform-msi.c | 1 + drivers/irqchip/irq-gic-v3-its-msi-parent.c | 8 ++ drivers/irqchip/irq-gic-v3-its.c | 2 +- drivers/misc/pci_endpoint_test.c | 82 ++++++++++++ drivers/pci/controller/dwc/pci-imx6.c | 25 ++-- drivers/pci/endpoint/Makefile | 1 + drivers/pci/endpoint/functions/pci-epf-test.c | 142 +++++++++++++++++++++ drivers/pci/endpoint/pci-ep-msi.c | 90 +++++++++++++ drivers/pci/endpoint/pci-epf-core.c | 48 +++++++ include/linux/irqdomain.h | 7 + include/linux/pci-ep-msi.h | 28 ++++ include/linux/pci-epf.h | 21 +++ include/uapi/linux/pcitest.h | 1 + .../selftests/pci_endpoint/pci_endpoint_test.c | 28 ++++ 16 files changed, 543 insertions(+), 9 deletions(-) --- base-commit: a4949bd40778aa9beac77c89e4c6a1da52875c8b change-id: 20241010-ep-msi-8b4cab33b1be Best regards, --- Frank Li <Frank.Li(a)nxp.com>

5 months

2
16
0 0

[PATCH net-next 0/8] mptcp: various small and unrelated improvements

by Matthieu Baerts (NGI0)

Here are various unrelated patches: - Patch 1: sched: remove unused structure. - Patch 2: sched: split the validation part, a preparation for later. - Patch 3: pm: clarify code, not to think there is a possible UaF. Note: a previous version has already been sent individually to Netdev. - Patch 4: subflow: simplify subflow_hmac_valid by passing subflow_req. - Patch 5: mib: add counter for MPJoin rejected by the PM. - Patch 6: selftests: validate this new MPJoinRejected counter. - Patch 7: selftests: define nlh variable only where needed. - Patch 8: selftests: show how to use IPPROTO_MPTCP with getaddrinfo. Note: a previous version has already been sent individually to Netdev. Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Geliang Tang (2): mptcp: sched: split validation part selftests: mptcp: diag: drop nlh parameter of recv_nlmsg Matthieu Baerts (NGI0) (4): mptcp: sched: remove mptcp_sched_data mptcp: pass right struct to subflow_hmac_valid mptcp: add MPJoinRejected MIB counter selftests: mptcp: validate MPJoinRejected counter Thorsten Blum (1): mptcp: pm: Return local variable instead of freed pointer zhenwei pi (1): selftests: mptcp: use IPPROTO_MPTCP for getaddrinfo include/net/mptcp.h | 13 ++------- net/mptcp/mib.c | 1 + net/mptcp/mib.h | 1 + net/mptcp/pm.c | 5 +++- net/mptcp/protocol.c | 4 ++- net/mptcp/protocol.h | 1 + net/mptcp/sched.c | 35 ++++++++++++++--------- net/mptcp/subflow.c | 12 ++++---- tools/testing/selftests/net/mptcp/mptcp_connect.c | 21 +++++++++++--- tools/testing/selftests/net/mptcp/mptcp_diag.c | 7 ++--- tools/testing/selftests/net/mptcp/mptcp_join.sh | 26 +++++++++++++---- 11 files changed, 80 insertions(+), 46 deletions(-) --- base-commit: 61499764e5cc5918c9f63026d3b7a34c8668d4b8 change-id: 20250411-net-next-mptcp-sched-mib-sft-misc-25f5a6218fd8 Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

5 months

3
10
0 0

[PATCH] selftests: Removing deprecated strncpy()

by Kevin Paul Reddy Janagari

This patch suggests the replacement of strncpy with strscpy as per Documentation/process/deprecated. The strncpy() fails to guarantee NULL termination, The function adds zero pads which isn't really convenient for short strings as it may cause performance issues. strscpy() is a preferred replacement because it overcomes the limitations of strncpy mentioned above. Compile Tested Signed-off-by: Kevin Paul Reddy Janagari <kevinpaul468(a)gmail.com> --- tools/testing/selftests/sync/sync.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/sync/sync.c b/tools/testing/selftests/sync/sync.c index 7741c0518d18..4b284f517433 100644 --- a/tools/testing/selftests/sync/sync.c +++ b/tools/testing/selftests/sync/sync.c @@ -29,8 +29,8 @@ #include <malloc.h> #include <poll.h> #include <stdint.h> -#include <string.h> #include <unistd.h> +#include <linux/string.h> #include <sys/ioctl.h> #include <sys/stat.h> @@ -71,7 +71,7 @@ int sync_merge(const char *name, int fd1, int fd2) int err; data.fd2 = fd2; - strncpy(data.name, name, sizeof(data.name) - 1); + strscpy(data.name, name, sizeof(data.name) - 1); data.name[sizeof(data.name) - 1] = '\0'; err = ioctl(fd1, SYNC_IOC_MERGE, &data); @@ -198,7 +198,7 @@ int sw_sync_fence_create(int fd, const char *name, unsigned int value) int err; data.value = value; - strncpy(data.name, name, sizeof(data.name) - 1); + strscpy(data.name, name, sizeof(data.name) - 1); data.name[sizeof(data.name) - 1] = '\0'; err = ioctl(fd, SW_SYNC_IOC_CREATE_FENCE, &data); -- 2.39.5

5 months

1
0
0 0

[PATCH 0/4] sysctl: Move the u8 range check test to lib/test_sysctl.c

by Joel Granados

Originally introduced to sysctl-test.c by commit b5ffbd139688 ("sysctl: move the extra1/2 boundary check of u8 to sysctl_check_table_array"), it has been shown to lead to a panic under certain conditions related to a dangling registration. This series moves the u8 test to lib/test_sysctl.c where the registration calls are kept and correctly removed on module exit. An additional 0012 test is added to selftests/sysctl/sysctl.sh in order to visualize the registration calls done in test_sysctl.c. Very much related to adding tests to sysctl, the last two patches of this series reduce the places that need to be changed when tests are added by managing the initialization and closing of sysctl tables with a for loop. Comments are greatly appreciated Signed-off-by: Joel Granados <joel.granados(a)kernel.org> --- Joel Granados (4): sysctl: move u8 register test to lib/test_sysctl.c sysctl: Add 0012 to test the u8 range check sysctl: call sysctl tests with a for loop sysctl: Close test ctl_headers with a for loop kernel/sysctl-test.c | 49 ------------ lib/test_sysctl.c | 133 +++++++++++++++++++++---------- tools/testing/selftests/sysctl/sysctl.sh | 30 +++++++ 3 files changed, 122 insertions(+), 90 deletions(-) --- base-commit: 7eb172143d5508b4da468ed59ee857c6e5e01da6 change-id: 20250321-jag-test_extra_val-40954050a1f6 Best regards, -- Joel Granados <joel.granados(a)kernel.org>

5 months

2
9
0 0

[PATCH bpf-next v2 0/6] selftests/bpf: Various sockmap-related fixes

by Michal Luczaj

Series takes care of few bugs and missing features with the aim to improve the test coverage of sockmap/sockhash. Last patch is a create_pair() rewrite making use of __attribute__((cleanup)) to handle socket fd lifetime. Signed-off-by: Michal Luczaj <mhal(a)rbox.co> --- Changes in v2: - Rebase on bpf-next (Jakub) - Use cleanup helpers from kernel's cleanup.h (Jakub) - Fix subject of patch 3, rephrase patch 4, use correct prefix - Link to v1: https://lore.kernel.org/r/20240724-sockmap-selftest-fixes-v1-0-46165d224712… Changes in v1: - No declarations in function body (Jakub) - Don't touch output arguments until function succeeds (Jakub) - Link to v0: https://lore.kernel.org/netdev/027fdb41-ee11-4be0-a493-22f28a1abd7c@rbox.co/ --- Michal Luczaj (6): selftests/bpf: Support more socket types in create_pair() selftests/bpf: Socket pair creation, cleanups selftests/bpf: Simplify inet_socketpair() and vsock_socketpair_connectible() selftests/bpf: Honour the sotype of af_unix redir tests selftests/bpf: Exercise SOCK_STREAM unix_inet_redir_to_connected() selftests/bpf: Introduce __attribute__((cleanup)) in create_pair() .../selftests/bpf/prog_tests/sockmap_basic.c | 28 ++-- .../selftests/bpf/prog_tests/sockmap_helpers.h | 149 ++++++++++++++------- .../selftests/bpf/prog_tests/sockmap_listen.c | 117 ++-------------- 3 files changed, 124 insertions(+), 170 deletions(-) --- base-commit: 92cc2456e9775dc4333fb4aa430763ae4ac2f2d9 change-id: 20240729-selftest-sockmap-fixes-bcca996e143b Best regards, -- Michal Luczaj <mhal(a)rbox.co>

5 months

3
26
0 0

[PATCH net-next v2 0/6] xfrm & bonding: Correct use of xso.real_dev

by Cosmin Ratiu

This patch series was motivated by fixing a few bugs in the bonding driver related to xfrm state migration on device failover. struct xfrm_dev_offload has two net_device pointers: dev and real_dev. The first one is the device the xfrm_state is offloaded on and the second one is used by the bonding driver to manage the underlying device xfrm_states are actually offloaded on. When bonding isn't used, the two pointers are the same. This causes confusion in drivers: Which device pointer should they use? If they want to support bonding, they need to only use real_dev and never look at dev. Furthermore, real_dev is used without proper locking from multiple code paths and changing it is dangerous. See commit [1] for example. This patch series clears things out by removing all uses of real_dev from outside the bonding driver. Then, the bonding driver is refactored to fix a couple of long standing races and the original bug which motivated this patch series. [1] commit f8cde9805981 ("bonding: fix xfrm real_dev null pointer dereference") v1 -> v2: Added missing kdoc for various functions. Made bond_ipsec_del_sa() use xso.real_dev instead of curr_active_slave. Cosmin Ratiu (6): Cleaning up unnecessary uses of xso.real_dev: net/mlx5: Avoid using xso.real_dev unnecessarily xfrm: Use xdo.dev instead of xdo.real_dev xfrm: Remove unneeded device check from validate_xmit_xfrm Refactoring device operations to get an explicit device pointer: xfrm: Add explicit dev to .xdo_dev_state_{add,delete,free} Fixing a bonding xfrm state migration bug: bonding: Mark active offloaded xfrm_states Fixing long standing races in bonding: bonding: Fix multiple long standing offload races Documentation/networking/xfrm_device.rst | 10 +- drivers/net/bonding/bond_main.c | 113 +++++++++--------- .../net/ethernet/chelsio/cxgb4/cxgb4_main.c | 20 ++-- .../inline_crypto/ch_ipsec/chcr_ipsec.c | 18 ++- .../net/ethernet/intel/ixgbe/ixgbe_ipsec.c | 41 ++++--- drivers/net/ethernet/intel/ixgbevf/ipsec.c | 21 ++-- .../marvell/octeontx2/nic/cn10k_ipsec.c | 18 +-- .../mellanox/mlx5/core/en_accel/ipsec.c | 28 ++--- .../mellanox/mlx5/core/en_accel/ipsec.h | 1 + .../net/ethernet/netronome/nfp/crypto/ipsec.c | 11 +- drivers/net/netdevsim/ipsec.c | 15 ++- include/linux/netdevice.h | 10 +- include/net/xfrm.h | 8 ++ net/xfrm/xfrm_device.c | 13 +- net/xfrm/xfrm_state.c | 16 +-- 15 files changed, 182 insertions(+), 161 deletions(-) -- 2.45.0

5 months

3
11
0 0

[PATCH v2 00/32] kselftest harness and nolibc compatibility

by Thomas Weißschuh

Nolibc is useful for selftests as the test programs can be very small, and compiled with just a kernel crosscompiler, without userspace support. Currently nolibc is only usable with kselftest.h, not the more convenient to use kselftest_harness.h This series provides this compatibility by adding new features to nolibc and removing the usage of problematic features from the harness. The first half of the series are changes to the harness, the second one are for nolibc. Both parts are very independent and should go through different trees. The last patch is not meant to be applied and serves as test that everything works together correctly. Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> --- Changes in v2: - Rebase unto v6.15-rc1 - Rename internal nolibc symbols - Handle edge case of waitpid(INT_MIN) == ESRCH - Fix arm configurations for final testing patch - Clean up global getopt.h variable declarations - Add Acks from Willy - Link to v1: https://lore.kernel.org/r/20250304-nolibc-kselftest-harness-v1-0-adca7cd231… --- Thomas Weißschuh (32): selftests: harness: Add harness selftest selftests: harness: Use C89 comment style selftests: harness: Ignore unused variant argument warning selftests: harness: Mark functions without prototypes static selftests: harness: Remove inline qualifier for wrappers selftests: harness: Remove dependency on libatomic selftests: harness: Implement test timeouts through pidfd selftests: harness: Don't set setup_completed for fixtureless tests selftests: harness: Always provide "self" and "variant" selftests: harness: Move teardown conditional into test metadata selftests: harness: Add teardown callback to test metadata selftests: harness: Stop using setjmp()/longjmp() selftests: harness: Guard includes on nolibc tools/nolibc: handle intmax_t/uintmax_t in printf tools/nolibc: use intmax definitions from compiler tools/nolibc: use pselect6_time64 if available tools/nolibc: use ppoll_time64 if available tools/nolibc: add tolower() and toupper() tools/nolibc: add _exit() tools/nolibc: add setpgrp() tools/nolibc: implement waitpid() in terms of waitid() Revert "selftests/nolibc: use waitid() over waitpid()" tools/nolibc: add dprintf() and vdprintf() tools/nolibc: add getopt() tools/nolibc: allow different write callbacks in printf tools/nolibc: allow limiting of printf destination size tools/nolibc: add snprintf() and friends selftests/nolibc: use snprintf() for printf tests selftests/nolibc: rename vfprintf test suite selftests/nolibc: add test for snprintf() truncation tools/nolibc: implement width padding in printf() HACK: selftests/nolibc: demonstrate usage of the kselftest harness tools/include/nolibc/Makefile | 1 + tools/include/nolibc/getopt.h | 101 ++ tools/include/nolibc/nolibc.h | 1 + tools/include/nolibc/stdint.h | 4 +- tools/include/nolibc/stdio.h | 127 +- tools/include/nolibc/string.h | 17 + tools/include/nolibc/sys.h | 105 +- tools/testing/selftests/Makefile | 1 + tools/testing/selftests/kselftest/.gitignore | 1 + tools/testing/selftests/kselftest/Makefile | 6 + .../testing/selftests/kselftest/harness-selftest.c | 129 ++ .../selftests/kselftest/harness-selftest.expected | 62 + .../selftests/kselftest/harness-selftest.sh | 14 + tools/testing/selftests/kselftest_harness.h | 181 +- tools/testing/selftests/nolibc/Makefile | 13 +- tools/testing/selftests/nolibc/harness-selftest.c | 1 + tools/testing/selftests/nolibc/nolibc-test.c | 1729 +------------------- tools/testing/selftests/nolibc/run-tests.sh | 2 +- 18 files changed, 635 insertions(+), 1860 deletions(-) --- base-commit: 0af2f6be1b4281385b618cb86ad946eded089ac8 change-id: 20250130-nolibc-kselftest-harness-8b2c8cac43bf Best regards, -- Thomas Weißschuh <thomas.weissschuh(a)linutronix.de>

5 months

2
37
0 0

[PATCH] firmware: cs_dsp: test_bin_error: Fix uninitialized data used as fw version

by Richard Fitzgerald

Call cs_dsp_mock_xm_header_get_fw_version() to get the firmware version from the dummy XM header data in cs_dsp_bin_err_test_common_init(). Make the same change to cs_dsp_bin_test_common_init() and remove the cs_dsp_mock_xm_header_get_fw_version_from_regmap() function. The code in cs_dsp_test_bin.c was correctly calling cs_dsp_mock_xm_header_get_fw_version_from_regmap() to fetch the fw version from a dummy header it wrote to XM registers. However in cs_dsp_test_bin_error.c the test doesn't stuff a dummy header into XM, it populates it the normal way using a wmfw file. It should have called cs_dsp_mock_xm_header_get_fw_version() to get the data from its blob buffer, but was calling cs_dsp_mock_xm_header_get_fw_version_from_regmap(). As nothing had been written to the registers this returned the value of uninitialized data. The only other use of cs_dsp_mock_xm_header_get_fw_version_from_regmap() was cs_dsp_test_bin.c, but it doesn't need to use it. It already has a blob buffer containing the dummy XM header so it can use cs_dsp_mock_xm_header_get_fw_version() to read from that. Fixes: cd8c058499b6 ("firmware: cs_dsp: Add KUnit testing of bin error cases") Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> --- .../cirrus/test/cs_dsp_mock_mem_maps.c | 30 ------------------- .../firmware/cirrus/test/cs_dsp_test_bin.c | 2 +- .../cirrus/test/cs_dsp_test_bin_error.c | 2 +- .../linux/firmware/cirrus/cs_dsp_test_utils.h | 1 - 4 files changed, 2 insertions(+), 33 deletions(-) diff --git a/drivers/firmware/cirrus/test/cs_dsp_mock_mem_maps.c b/drivers/firmware/cirrus/test/cs_dsp_mock_mem_maps.c index 161272e47bda..73412bcef50c 100644 --- a/drivers/firmware/cirrus/test/cs_dsp_mock_mem_maps.c +++ b/drivers/firmware/cirrus/test/cs_dsp_mock_mem_maps.c @@ -461,36 +461,6 @@ unsigned int cs_dsp_mock_xm_header_get_alg_base_in_words(struct cs_dsp_test *pri } EXPORT_SYMBOL_NS_GPL(cs_dsp_mock_xm_header_get_alg_base_in_words, "FW_CS_DSP_KUNIT_TEST_UTILS"); -/** - * cs_dsp_mock_xm_header_get_fw_version_from_regmap() - Firmware version. - * - * @priv: Pointer to struct cs_dsp_test. - * - * Return: Firmware version word value. - */ -unsigned int cs_dsp_mock_xm_header_get_fw_version_from_regmap(struct cs_dsp_test *priv) -{ - unsigned int xm = cs_dsp_mock_base_addr_for_mem(priv, WMFW_ADSP2_XM); - union { - struct wmfw_id_hdr adsp2; - struct wmfw_v3_id_hdr halo; - } hdr; - - switch (priv->dsp->type) { - case WMFW_ADSP2: - regmap_raw_read(priv->dsp->regmap, xm, &hdr.adsp2, sizeof(hdr.adsp2)); - return be32_to_cpu(hdr.adsp2.ver); - case WMFW_HALO: - regmap_raw_read(priv->dsp->regmap, xm, &hdr.halo, sizeof(hdr.halo)); - return be32_to_cpu(hdr.halo.ver); - default: - KUNIT_FAIL(priv->test, NULL); - return 0; - } -} -EXPORT_SYMBOL_NS_GPL(cs_dsp_mock_xm_header_get_fw_version_from_regmap, - "FW_CS_DSP_KUNIT_TEST_UTILS"); - /** * cs_dsp_mock_xm_header_get_fw_version() - Firmware version. * diff --git a/drivers/firmware/cirrus/test/cs_dsp_test_bin.c b/drivers/firmware/cirrus/test/cs_dsp_test_bin.c index 1e161bbc5b4a..163b7faecff4 100644 --- a/drivers/firmware/cirrus/test/cs_dsp_test_bin.c +++ b/drivers/firmware/cirrus/test/cs_dsp_test_bin.c @@ -2198,7 +2198,7 @@ static int cs_dsp_bin_test_common_init(struct kunit *test, struct cs_dsp *dsp) priv->local->bin_builder = cs_dsp_mock_bin_init(priv, 1, - cs_dsp_mock_xm_header_get_fw_version_from_regmap(priv)); + cs_dsp_mock_xm_header_get_fw_version(xm_hdr)); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->local->bin_builder); /* We must provide a dummy wmfw to load */ diff --git a/drivers/firmware/cirrus/test/cs_dsp_test_bin_error.c b/drivers/firmware/cirrus/test/cs_dsp_test_bin_error.c index 8748874f0552..a7ec956d2724 100644 --- a/drivers/firmware/cirrus/test/cs_dsp_test_bin_error.c +++ b/drivers/firmware/cirrus/test/cs_dsp_test_bin_error.c @@ -451,7 +451,7 @@ static int cs_dsp_bin_err_test_common_init(struct kunit *test, struct cs_dsp *ds local->bin_builder = cs_dsp_mock_bin_init(priv, 1, - cs_dsp_mock_xm_header_get_fw_version_from_regmap(priv)); + cs_dsp_mock_xm_header_get_fw_version(local->xm_header)); KUNIT_ASSERT_NOT_ERR_OR_NULL(test, local->bin_builder); /* Init cs_dsp */ diff --git a/include/linux/firmware/cirrus/cs_dsp_test_utils.h b/include/linux/firmware/cirrus/cs_dsp_test_utils.h index 4f87a908ab4f..ecd821ed8064 100644 --- a/include/linux/firmware/cirrus/cs_dsp_test_utils.h +++ b/include/linux/firmware/cirrus/cs_dsp_test_utils.h @@ -104,7 +104,6 @@ unsigned int cs_dsp_mock_num_dsp_words_to_num_packed_regs(unsigned int num_dsp_w unsigned int cs_dsp_mock_xm_header_get_alg_base_in_words(struct cs_dsp_test *priv, unsigned int alg_id, int mem_type); -unsigned int cs_dsp_mock_xm_header_get_fw_version_from_regmap(struct cs_dsp_test *priv); unsigned int cs_dsp_mock_xm_header_get_fw_version(struct cs_dsp_mock_xm_header *header); void cs_dsp_mock_xm_header_drop_from_regmap_cache(struct cs_dsp_test *priv); int cs_dsp_mock_xm_header_write_to_regmap(struct cs_dsp_mock_xm_header *header); -- 2.39.5

5 months

2
1
0 0

[PATCH v3 2/2] rcutorture: Fix issue with re-using old images on ARM64

by Joel Fernandes

On ARM64, when running with --configs '36*SRCU-P', I noticed that only 1 instance instead of 36 for starting. Fix it by checking for Image files, instead of bzImage which ARM does not seem to have. With this I see all 36 instances running at the same time in the batch. Signed-off-by: Joel Fernandes <joelagnelf(a)nvidia.com> --- tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh index ad79784e552d..957800c9ffba 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh @@ -73,7 +73,7 @@ config_override_param "$config_dir/CFcommon.$(uname -m)" KcList \ cp $T/KcList $resdir/ConfigFragment base_resdir=`echo $resdir | sed -e 's/\.[0-9]\+$//'` -if test "$base_resdir" != "$resdir" && test -f $base_resdir/bzImage && test -f $base_resdir/vmlinux +if test "$base_resdir" != "$resdir" && (test -f $base_resdir/bzImage || test -f $base_resdir/Image) && test -f $base_resdir/vmlinux then # Rerunning previous test, so use that test's kernel. QEMU="`identify_qemu $base_resdir/vmlinux`" -- 2.43.0

5 months

1
0
0 0

[PATCH bpf-next v1 0/4] bpf, sockmap: Fix data loss and panic issues

by Jiayuan Chen

I was writing a benchmark based on sockmap + TCP and discovered several issues: 1. When EAGAIN occurs, the direction of skb is incorrect, causing data loss when retry. 2. When sending partial data, the offset is not recorded, leading to duplicate data being sent when retry. 3. An unexpected BUG_ON() judgment in skb_linearize is triggered. 4. The memory of psock->ingress_skb is not limited by the socket buffer and memcg. Issues 1, 2, and 3 are described in each patch's commit message. Regarding issue 4, this patchset does not cover it as it is difficult to handle in practice, and I am still working on it. Here is a brief description of the issue: When using sockmap to skb/stream redirect, if the receiving end does not perform read operations, all data will be buffered in ingress_skb. For example: ''' // set memory limit to 50G cgcreate -g memory:myGroup cgset -r memory.max="5000M" myGroup // start benchmark and disable consumer from reading cgexec -g "memory:myGroup" ./bench sockmap -c 2 -p 1 -a --rx-verdict-ingress --delay-consumer=-1 -d 100 Iter 0 ( 29.179us): Send Speed 2668.548 MB/s (20360.406 calls/s), ... Rcv Speed 0.000 MB/s ( 0.000 calls/s) Iter 1 ( -7.237us): Send Speed 2694.467 MB/s (20557.149 calls/s), ... Rcv Speed 0.000 MB/s ( 0.000 calls/s) Iter 2 ( -1.918us): Send Speed 2693.404 MB/s (20548.039 calls/s), ... Rcv Speed 0.000 MB/s ( 0.000 calls/s) Iter 3 ( -0.684us): Send Speed 2693.138 MB/s (20548.014 calls/s), ... Rcv Speed 0.000 MB/s ( 0.000 calls/s) Iter 4 ( 7.879us): Send Speed 2698.620 MB/s (20588.838 calls/s), ... Rcv Speed 0.000 MB/s ( 0.000 calls/s) Iter 5 ( -3.224us): Send Speed 2696.553 MB/s (20573.066 calls/s), ... Rcv Speed 0.000 MB/s ( 0.000 calls/s) Iter 6 ( -5.409us): Send Speed 2699.705 MB/s (20597.111 calls/s), ... Rcv Speed 0.000 MB/s ( 0.000 calls/s) Iter 7 ( -0.439us): Send Speed 2699.691 MB/s (20597.009 calls/s), ... Rcv Speed 0.000 MB/s ( 0.000 calls/s) ... // memory usage are not limited cat /proc/slabinfo | grep skb skbuff_small_head 11824024 11824024 704 46 8 : tunables 0 0 0 : slabdata 257044 257044 0 skbuff_fclone_cache 11822080 11822080 512 32 4 : tunables 0 0 0 : slabdata 369440 369440 0 ''' Thus, a simple socket in a large file upload/download model can eat the entire OS memory. We must charge the skb memory to psock->sk, and if we do not want losing skb, we need to feedback the error info to read_sock/read_skb when the enqueue operation of psock->ingress_skb fails. --- My another patch related to stability also requires maintainers to spare some time from their busy schedules for review. https://lore.kernel.org/bpf/20250317092257.68760-1-jiayuan.chen@linux.dev/T… Jiayuan Chen (4): bpf, sockmap: Fix data lost during EAGAIN retries bpf, sockmap: fix duplicated data transmission bpf, sockmap: Fix panic when calling skb_linearize selftest/bpf/benchs: Add benchmark for sockmap usage net/core/skmsg.c | 48 +- tools/testing/selftests/bpf/Makefile | 2 + tools/testing/selftests/bpf/bench.c | 4 + .../selftests/bpf/benchs/bench_sockmap.c | 599 ++++++++++++++++++ .../selftests/bpf/progs/bench_sockmap_prog.c | 65 ++ 5 files changed, 697 insertions(+), 21 deletions(-) create mode 100644 tools/testing/selftests/bpf/benchs/bench_sockmap.c create mode 100644 tools/testing/selftests/bpf/progs/bench_sockmap_prog.c -- 2.47.1

5 months

3
6
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror