- Linux-kselftest-mirror - lists.linaro.org

[PATCH net-next] selftest: Add selftest for multicast address notifications

by Yuyang Huang

This commit adds a new kernel selftest to verify RTNLGRP_IPV4_MCADDR and RTNLGRP_IPV6_MCADDR notifications. The test works by adding and removing a dummy interface and then confirming that the system correctly receives join and removal notifications for the 224.0.0.1 and ff02::1 multicast addresses. The test relies on the iproute2 version to be 6.13+. Tested by the following command: $ vng -v --user root --cpus 16 -- \ make -C tools/testing/selftests TARGETS=net TEST_PROGS=rtnetlink.sh \ TEST_GEN_PROGS="" run_tests Cc: Maciej Żenczykowski <maze(a)google.com> Cc: Lorenzo Colitti <lorenzo(a)google.com> Signed-off-by: Yuyang Huang <yuyanghuang(a)google.com> --- tools/testing/selftests/net/rtnetlink.sh | 34 ++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/tools/testing/selftests/net/rtnetlink.sh b/tools/testing/selftests/net/rtnetlink.sh index 2e8243a65b50..9dbcaaeaf8cd 100755 --- a/tools/testing/selftests/net/rtnetlink.sh +++ b/tools/testing/selftests/net/rtnetlink.sh @@ -21,6 +21,7 @@ ALL_TESTS=" kci_test_vrf kci_test_encap kci_test_macsec + kci_test_mcast_addr_notification kci_test_ipsec kci_test_ipsec_offload kci_test_fdb_get @@ -1334,6 +1335,39 @@ kci_test_mngtmpaddr() return $ret } +kci_test_mcast_addr_notification() +{ + local tmpfile + local monitor_pid + local match_result + + tmpfile=$(mktemp) + + ip monitor maddr > $tmpfile & + monitor_pid=$! + sleep 1 + + run_cmd ip link add name test-dummy1 type dummy + run_cmd ip link set test-dummy1 up + run_cmd ip link del dev test-dummy1 + sleep 1 + + match_result=$(grep -cE "test-dummy1.*(224.0.0.1|ff02::1)" $tmpfile) + + kill $monitor_pid + rm $tmpfile + # There should be 4 line matches as follows. + # 13: test-dummy1 inet6 mcast ff02::1 scope global + # 13: test-dummy1 inet mcast 224.0.0.1 scope global + # Deleted 13: test-dummy1 inet mcast 224.0.0.1 scope global + # Deleted 13: test-dummy1 inet6 mcast ff02::1 scope global + if [ $match_result -ne 4 ];then + end_test "FAIL: mcast addr notification" + return 1 + fi + end_test "PASS: mcast addr notification" +} + kci_test_rtnl() { local current_test -- 2.49.0.1204.g71687c7c1d-goog

5 months, 1 week

2
2
0 0

[PATCH v1] selftests/mm: two fixes for the pfnmap test

by David Hildenbrand

When unregistering the signal handler, we have to pass SIG_DFL, and blindly reading from PFN 0 and PFN 1 seems to be problematic on !x86 systems. In particularly, on arm64 tx2 machines where noting resides at these physical memory locations, we can generate RAS errors. Let's fix it by scanning /proc/iomem for actual "System RAM". Reported-by: Ryan Roberts <ryan.roberts(a)arm.com> Closes: https://lore.kernel.org/all/232960c2-81db-47ca-a337-38c4bce5f997@arm.com/T/… Fixes: 2616b370323a ("selftests/mm: add simple VM_PFNMAP tests based on mmap'ing /dev/mem") Reviewed-by: Ryan Roberts <ryan.roberts(a)arm.com> Tested-by: Aishwarya TCV <aishwarya.tcv(a)arm.com> Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: Shuah Khan <shuah(a)kernel.org> Cc: Lorenzo Stoakes <lorenzo.stoakes(a)oracle.com> Signed-off-by: David Hildenbrand <david(a)redhat.com> --- tools/testing/selftests/mm/pfnmap.c | 61 +++++++++++++++++++++++++++-- 1 file changed, 57 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/mm/pfnmap.c b/tools/testing/selftests/mm/pfnmap.c index 8a9d19b6020c7..866ac023baf5c 100644 --- a/tools/testing/selftests/mm/pfnmap.c +++ b/tools/testing/selftests/mm/pfnmap.c @@ -12,6 +12,8 @@ #include <stdint.h> #include <unistd.h> #include <errno.h> +#include <stdio.h> +#include <ctype.h> #include <fcntl.h> #include <signal.h> #include <setjmp.h> @@ -43,14 +45,62 @@ static int test_read_access(char *addr, size_t size, size_t pagesize) /* Force a read that the compiler cannot optimize out. */ *((volatile char *)(addr + offs)); } - if (signal(SIGSEGV, signal_handler) == SIG_ERR) + if (signal(SIGSEGV, SIG_DFL) == SIG_ERR) return -EINVAL; return ret; } +static int find_ram_target(off_t *phys_addr, + unsigned long long pagesize) +{ + unsigned long long start, end; + char line[80], *end_ptr; + FILE *file; + + /* Search /proc/iomem for the first suitable "System RAM" range. */ + file = fopen("/proc/iomem", "r"); + if (!file) + return -errno; + + while (fgets(line, sizeof(line), file)) { + /* Ignore any child nodes. */ + if (!isalnum(line[0])) + continue; + + if (!strstr(line, "System RAM\n")) + continue; + + start = strtoull(line, &end_ptr, 16); + /* Skip over the "-" */ + end_ptr++; + /* Make end "exclusive". */ + end = strtoull(end_ptr, NULL, 16) + 1; + + /* Actual addresses are not exported */ + if (!start && !end) + break; + + /* We need full pages. */ + start = (start + pagesize - 1) & ~(pagesize - 1); + end &= ~(pagesize - 1); + + if (start != (off_t)start) + break; + + /* We need two pages. */ + if (end > start + 2 * pagesize) { + fclose(file); + *phys_addr = start; + return 0; + } + } + return -ENOENT; +} + FIXTURE(pfnmap) { + off_t phys_addr; size_t pagesize; int dev_mem_fd; char *addr1; @@ -63,14 +113,17 @@ FIXTURE_SETUP(pfnmap) { self->pagesize = getpagesize(); + /* We'll require two physical pages throughout our tests ... */ + if (find_ram_target(&self->phys_addr, self->pagesize)) + SKIP(return, "Cannot find ram target in '/proc/iomem'\n"); + self->dev_mem_fd = open("/dev/mem", O_RDONLY); if (self->dev_mem_fd < 0) SKIP(return, "Cannot open '/dev/mem'\n"); - /* We'll require the first two pages throughout our tests ... */ self->size1 = self->pagesize * 2; self->addr1 = mmap(NULL, self->size1, PROT_READ, MAP_SHARED, - self->dev_mem_fd, 0); + self->dev_mem_fd, self->phys_addr); if (self->addr1 == MAP_FAILED) SKIP(return, "Cannot mmap '/dev/mem'\n"); @@ -129,7 +182,7 @@ TEST_F(pfnmap, munmap_split) */ self->size2 = self->pagesize; self->addr2 = mmap(NULL, self->pagesize, PROT_READ, MAP_SHARED, - self->dev_mem_fd, 0); + self->dev_mem_fd, self->phys_addr); ASSERT_NE(self->addr2, MAP_FAILED); } -- 2.49.0

5 months, 1 week

1
0
0 0

[PATCH v2] selftests/mm: add simple VM_PFNMAP tests based on mmap'ing /dev/mem

by David Hildenbrand

Let's test some basic functionality using /dev/mem. These tests will implicitly cover some PAT (Page Attribute Handling) handling on x86. These tests will only run when /dev/mem access to the first two pages in physical address space is possible and allowed; otherwise, the tests are skipped. On current x86-64 with PAT inside a VM, all tests pass: TAP version 13 1..6 # Starting 6 tests from 1 test cases. # RUN pfnmap.madvise_disallowed ... # OK pfnmap.madvise_disallowed ok 1 pfnmap.madvise_disallowed # RUN pfnmap.munmap_split ... # OK pfnmap.munmap_split ok 2 pfnmap.munmap_split # RUN pfnmap.mremap_fixed ... # OK pfnmap.mremap_fixed ok 3 pfnmap.mremap_fixed # RUN pfnmap.mremap_shrink ... # OK pfnmap.mremap_shrink ok 4 pfnmap.mremap_shrink # RUN pfnmap.mremap_expand ... # OK pfnmap.mremap_expand ok 5 pfnmap.mremap_expand # RUN pfnmap.fork ... # OK pfnmap.fork ok 6 pfnmap.fork # PASSED: 6 / 6 tests passed. # Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0 However, we are able to trigger: [ 27.888251] x86/PAT: pfnmap:1790 freeing invalid memtype [mem 0x00000000-0x00000fff] There are probably more things worth testing in the future, such as MAP_PRIVATE handling. But this set of tests is sufficient to cover most of the things we will rework regarding PAT handling. Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: Shuah Khan <shuah(a)kernel.org> Cc: Lorenzo Stoakes <lorenzo.stoakes(a)oracle.com> Cc: Ingo Molnar <mingo(a)redhat.com> Cc: Peter Xu <peterx(a)redhat.com> Cc: Dev Jain <dev.jain(a)arm.com> Signed-off-by: David Hildenbrand <david(a)redhat.com> --- Hopefully I didn't miss any review feedback. v1 -> v2: * Rewrite using kselftest_harness, which simplifies a lot of things * Add to .gitignore and run_vmtests.sh * Register signal handler on demand * Use volatile trick to force a read (not factoring out FORCE_READ just yet) * Drop mprotect() test case * Add some more comments why we test certain things * Use NULL for mmap() first parameter instead of 0 * Smaller fixes --- tools/testing/selftests/mm/.gitignore | 1 + tools/testing/selftests/mm/Makefile | 1 + tools/testing/selftests/mm/pfnmap.c | 196 ++++++++++++++++++++++ tools/testing/selftests/mm/run_vmtests.sh | 4 + 4 files changed, 202 insertions(+) create mode 100644 tools/testing/selftests/mm/pfnmap.c diff --git a/tools/testing/selftests/mm/.gitignore b/tools/testing/selftests/mm/.gitignore index 91db34941a143..824266982aa36 100644 --- a/tools/testing/selftests/mm/.gitignore +++ b/tools/testing/selftests/mm/.gitignore @@ -20,6 +20,7 @@ mremap_test on-fault-limit transhuge-stress pagemap_ioctl +pfnmap *.tmp* protection_keys protection_keys_32 diff --git a/tools/testing/selftests/mm/Makefile b/tools/testing/selftests/mm/Makefile index ad4d6043a60f0..ae6f994d3add7 100644 --- a/tools/testing/selftests/mm/Makefile +++ b/tools/testing/selftests/mm/Makefile @@ -84,6 +84,7 @@ TEST_GEN_FILES += mremap_test TEST_GEN_FILES += mseal_test TEST_GEN_FILES += on-fault-limit TEST_GEN_FILES += pagemap_ioctl +TEST_GEN_FILES += pfnmap TEST_GEN_FILES += thuge-gen TEST_GEN_FILES += transhuge-stress TEST_GEN_FILES += uffd-stress diff --git a/tools/testing/selftests/mm/pfnmap.c b/tools/testing/selftests/mm/pfnmap.c new file mode 100644 index 0000000000000..8a9d19b6020c7 --- /dev/null +++ b/tools/testing/selftests/mm/pfnmap.c @@ -0,0 +1,196 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Basic VM_PFNMAP tests relying on mmap() of '/dev/mem' + * + * Copyright 2025, Red Hat, Inc. + * + * Author(s): David Hildenbrand <david(a)redhat.com> + */ +#define _GNU_SOURCE +#include <stdlib.h> +#include <string.h> +#include <stdint.h> +#include <unistd.h> +#include <errno.h> +#include <fcntl.h> +#include <signal.h> +#include <setjmp.h> +#include <linux/mman.h> +#include <sys/mman.h> +#include <sys/wait.h> + +#include "../kselftest_harness.h" +#include "vm_util.h" + +static sigjmp_buf sigjmp_buf_env; + +static void signal_handler(int sig) +{ + siglongjmp(sigjmp_buf_env, -EFAULT); +} + +static int test_read_access(char *addr, size_t size, size_t pagesize) +{ + size_t offs; + int ret; + + if (signal(SIGSEGV, signal_handler) == SIG_ERR) + return -EINVAL; + + ret = sigsetjmp(sigjmp_buf_env, 1); + if (!ret) { + for (offs = 0; offs < size; offs += pagesize) + /* Force a read that the compiler cannot optimize out. */ + *((volatile char *)(addr + offs)); + } + if (signal(SIGSEGV, signal_handler) == SIG_ERR) + return -EINVAL; + + return ret; +} + +FIXTURE(pfnmap) +{ + size_t pagesize; + int dev_mem_fd; + char *addr1; + size_t size1; + char *addr2; + size_t size2; +}; + +FIXTURE_SETUP(pfnmap) +{ + self->pagesize = getpagesize(); + + self->dev_mem_fd = open("/dev/mem", O_RDONLY); + if (self->dev_mem_fd < 0) + SKIP(return, "Cannot open '/dev/mem'\n"); + + /* We'll require the first two pages throughout our tests ... */ + self->size1 = self->pagesize * 2; + self->addr1 = mmap(NULL, self->size1, PROT_READ, MAP_SHARED, + self->dev_mem_fd, 0); + if (self->addr1 == MAP_FAILED) + SKIP(return, "Cannot mmap '/dev/mem'\n"); + + /* ... and want to be able to read from them. */ + if (test_read_access(self->addr1, self->size1, self->pagesize)) + SKIP(return, "Cannot read-access mmap'ed '/dev/mem'\n"); + + self->size2 = 0; + self->addr2 = MAP_FAILED; +} + +FIXTURE_TEARDOWN(pfnmap) +{ + if (self->addr2 != MAP_FAILED) + munmap(self->addr2, self->size2); + if (self->addr1 != MAP_FAILED) + munmap(self->addr1, self->size1); + if (self->dev_mem_fd >= 0) + close(self->dev_mem_fd); +} + +TEST_F(pfnmap, madvise_disallowed) +{ + int advices[] = { + MADV_DONTNEED, + MADV_DONTNEED_LOCKED, + MADV_FREE, + MADV_WIPEONFORK, + MADV_COLD, + MADV_PAGEOUT, + MADV_POPULATE_READ, + MADV_POPULATE_WRITE, + }; + int i; + + /* All these advices must be rejected. */ + for (i = 0; i < ARRAY_SIZE(advices); i++) { + EXPECT_LT(madvise(self->addr1, self->pagesize, advices[i]), 0); + EXPECT_EQ(errno, EINVAL); + } +} + +TEST_F(pfnmap, munmap_split) +{ + /* + * Unmap the first page. This munmap() call is not really expected to + * fail, but we might be able to trigger other internal issues. + */ + ASSERT_EQ(munmap(self->addr1, self->pagesize), 0); + + /* + * Remap the first page while the second page is still mapped. This + * makes sure that any PAT tracking on x86 will allow for mmap()'ing + * a page again while some parts of the first mmap() are still + * around. + */ + self->size2 = self->pagesize; + self->addr2 = mmap(NULL, self->pagesize, PROT_READ, MAP_SHARED, + self->dev_mem_fd, 0); + ASSERT_NE(self->addr2, MAP_FAILED); +} + +TEST_F(pfnmap, mremap_fixed) +{ + char *ret; + + /* Reserve a destination area. */ + self->size2 = self->size1; + self->addr2 = mmap(NULL, self->size2, PROT_READ, MAP_ANON | MAP_PRIVATE, + -1, 0); + ASSERT_NE(self->addr2, MAP_FAILED); + + /* mremap() over our destination. */ + ret = mremap(self->addr1, self->size1, self->size2, + MREMAP_FIXED | MREMAP_MAYMOVE, self->addr2); + ASSERT_NE(ret, MAP_FAILED); +} + +TEST_F(pfnmap, mremap_shrink) +{ + char *ret; + + /* Shrinking is expected to work. */ + ret = mremap(self->addr1, self->size1, self->size1 - self->pagesize, 0); + ASSERT_NE(ret, MAP_FAILED); +} + +TEST_F(pfnmap, mremap_expand) +{ + /* + * Growing is not expected to work, and getting it right would + * be challenging. So this test primarily serves as an early warning + * that something that probably should never work suddenly works. + */ + self->size2 = self->size1 + self->pagesize; + self->addr2 = mremap(self->addr1, self->size1, self->size2, MREMAP_MAYMOVE); + ASSERT_EQ(self->addr2, MAP_FAILED); +} + +TEST_F(pfnmap, fork) +{ + pid_t pid; + int ret; + + /* fork() a child and test if the child can access the pages. */ + pid = fork(); + ASSERT_GE(pid, 0); + + if (!pid) { + EXPECT_EQ(test_read_access(self->addr1, self->size1, + self->pagesize), 0); + exit(0); + } + + wait(&ret); + if (WIFEXITED(ret)) + ret = WEXITSTATUS(ret); + else + ret = -EINVAL; + ASSERT_EQ(ret, 0); +} + +TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/mm/run_vmtests.sh b/tools/testing/selftests/mm/run_vmtests.sh index 188b125bf1f6b..dddd1dd8af145 100755 --- a/tools/testing/selftests/mm/run_vmtests.sh +++ b/tools/testing/selftests/mm/run_vmtests.sh @@ -63,6 +63,8 @@ separated by spaces: test soft dirty page bit semantics - pagemap test pagemap_scan IOCTL +- pfnmap + tests for VM_PFNMAP handling - cow test copy-on-write semantics - thp @@ -472,6 +474,8 @@ fi CATEGORY="pagemap" run_test ./pagemap_ioctl +CATEGORY="pfnmap" run_test ./pfnmap + # COW tests CATEGORY="cow" run_test ./cow -- 2.49.0

5 months, 1 week

4
12
0 0

[PATCH v2] rust: kunit: use crate-level mapping for `c_void`

by Jesung Yang

Use `kernel::ffi::c_void` instead of `core::ffi::c_void` for consistency and to centralize abstraction. Since `kernel::ffi::c_void` is a straightforward re-export of `core::ffi::c_void`, both are functionally equivalent. However, using `kernel::ffi::c_void` improves consistency across the kernel's Rust code and provides a unified reference point in case the definition ever needs to change, even if such a change is unlikely. Signed-off-by: Jesung Yang <y.j3ms.n(a)gmail.com> Link: https://rust-for-linux.zulipchat.com/#narrow/channel/288089/topic/x/near/52… --- So in sum, I believe it's reasonable to keep the diff unchanged... but I'm happy to adjust if you'd prefer a different approach. --- Changes in v2: - Add "Link" tag to the related discussion on Zulip - Reword the commit message to clarify `kernel::ffi::c_void` is a re-export - Link to v1: https://lore.kernel.org/rust-for-linux/20250526162429.1114862-1-y.j3ms.n@gm… --- rust/kernel/kunit.rs | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/rust/kernel/kunit.rs b/rust/kernel/kunit.rs index 81833a687b75..bd6fc712dd79 100644 --- a/rust/kernel/kunit.rs +++ b/rust/kernel/kunit.rs @@ -6,7 +6,8 @@ //! //! Reference: <https://docs.kernel.org/dev-tools/kunit/index.html> -use core::{ffi::c_void, fmt}; +use core::fmt; +use kernel::ffi::c_void; /// Prints a KUnit error-level message. /// base-commit: f4daa80d6be7d3c55ca72a8e560afc4e21f886aa -- 2.39.5

5 months, 1 week

3
2
0 0

[PATCH] rust: replace length checks with match

by Tamir Duberstein

Use a match expression with slice patterns instead of length checks and indexing. The result is more idiomatic, which is a better example for future Rust code authors. Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- scripts/rustdoc_test_gen.rs | 33 +++++++++++++++++---------------- 1 file changed, 17 insertions(+), 16 deletions(-) diff --git a/scripts/rustdoc_test_gen.rs b/scripts/rustdoc_test_gen.rs index 1ca253594d38..a3dc251221e0 100644 --- a/scripts/rustdoc_test_gen.rs +++ b/scripts/rustdoc_test_gen.rs @@ -85,24 +85,25 @@ fn find_candidates( } } - assert!( - valid_paths.len() > 0, - "No path candidates found for `{file}`. This is likely a bug in the build system, or some \ - files went away while compiling." - ); - - if valid_paths.len() > 1 { - eprintln!("Several path candidates found:"); - for path in valid_paths { - eprintln!(" {path:?}"); + match valid_paths.as_slice() { + [] => panic!( + "No path candidates found for `{file}`. This is likely a bug in the build system, or \ + some files went away while compiling." + ), + [valid_path] => { + valid_path.to_str().unwrap() + } + valid_paths => { + eprintln!("Several path candidates found:"); + for path in valid_paths { + eprintln!(" {path:?}"); + } + panic!( + "Several path candidates found for `{file}`, please resolve the ambiguity by \ + renaming a file or folder." + ); } - panic!( - "Several path candidates found for `{file}`, please resolve the ambiguity by renaming \ - a file or folder." - ); } - - valid_paths[0].to_str().unwrap() } fn main() { --- base-commit: bfc3cd87559bc593bb32bb1482f9cae3308b6398 change-id: 20250527-idiomatic-match-slice-26a79d100e4d Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

5 months, 1 week

3
3
0 0

[PATCH next] tools/testing: Check correct variable in open_procmap()

by Dan Carpenter

Check if "procmap_out->fd" is negative instead of "procmap_out" (which is a pointer). Fixes: bd23f293a0d5 ("tools/testing: add PROCMAP_QUERY helper functions in mm self tests") Signed-off-by: Dan Carpenter <dan.carpenter(a)linaro.org> --- tools/testing/selftests/mm/vm_util.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/mm/vm_util.c b/tools/testing/selftests/mm/vm_util.c index 1357e2d6a7b6..61d7bf1f8c62 100644 --- a/tools/testing/selftests/mm/vm_util.c +++ b/tools/testing/selftests/mm/vm_util.c @@ -439,7 +439,7 @@ int open_procmap(pid_t pid, struct procmap_fd *procmap_out) sprintf(path, "/proc/%d/maps", pid); procmap_out->query.size = sizeof(procmap_out->query); procmap_out->fd = open(path, O_RDONLY); - if (procmap_out < 0) + if (procmap_out->fd < 0) ret = -errno; return ret; -- 2.47.2

5 months, 1 week

2
1
0 0

[PATCH net-next v9] selftests/vsock: add initial vmtest.sh for vsock

by Bobby Eshleman

This commit introduces a new vmtest.sh runner for vsock. It uses virtme-ng/qemu to run tests in a VM. The tests validate G2H, H2G, and loopback. The testing tools from tools/testing/vsock/ are reused. Currently, only vsock_test is used. VMCI and hyperv support is included in the config file to be built with the -b option, though not used in the tests. Only tested on x86. To run: $ make -C tools/testing/selftests TARGETS=vsock $ tools/testing/selftests/vsock/vmtest.sh or $ make -C tools/testing/selftests TARGETS=vsock run_tests Example runs (after make -C tools/testing/selftests TARGETS=vsock): $ ./tools/testing/selftests/vsock/vmtest.sh 1..3 ok 0 vm_server_host_client ok 1 vm_client_host_server ok 2 vm_loopback SUMMARY: PASS=3 SKIP=0 FAIL=0 Log: /tmp/vsock_vmtest_m7DI.log $ ./tools/testing/selftests/vsock/vmtest.sh vm_loopback 1..1 ok 0 vm_loopback SUMMARY: PASS=1 SKIP=0 FAIL=0 Log: /tmp/vsock_vmtest_a1IO.log $ mkdir -p ~/scratch $ make -C tools/testing/selftests install TARGETS=vsock INSTALL_PATH=~/scratch [... omitted ...] $ cd ~/scratch $ ./run_kselftest.sh TAP version 13 1..1 # timeout set to 300 # selftests: vsock: vmtest.sh # 1..3 # ok 0 vm_server_host_client # ok 1 vm_client_host_server # ok 2 vm_loopback # SUMMARY: PASS=3 SKIP=0 FAIL=0 # Log: /tmp/vsock_vmtest_svEl.log ok 1 selftests: vsock: vmtest.sh Future work can include vsock_diag_test. Because vsock requires a VM to test anything other than loopback, this patch adds vmtest.sh as a kselftest itself. This is different than other systems that have a "vmtest.sh", where it is used as a utility script to spin up a VM to run the selftests as a guest (but isn't hooked into kselftest). Signed-off-by: Bobby Eshleman <bobbyeshleman(a)gmail.com> --- Changes in v9: - make kselftest build target depend on tools/testing/vsock sources (Stefano) - add check_vng() for vng version checking (Stefano) - add virtme_ssh_channel=tcp to kernel cmdline (Stefano) - Link to v8: https://lore.kernel.org/r/20250522-vsock-vmtest-v8-1-367619bef134@gmail.com Changes in v8: - remove NIPA comment from commit msg - remove tap_* functions and TAP_PREFIX - add -b for building kernel - Link to v7: https://lore.kernel.org/r/20250515-vsock-vmtest-v7-1-ba6fa86d6c2c@gmail.com Changes in v7: - fix exit code bug when ran is kselftest: use cnt_total instead of KSFT_NUM_TESTS - updated commit message with updated output - updated commit message with commands for installing/running as kselftest - Link to v6: https://lore.kernel.org/r/20250515-vsock-vmtest-v6-1-9af1cc023900@gmail.com Changes in v6: - add make cmd in commit message in vmtest.sh example (Stefano) - check nonzero size of QEMU_PIDFILE using -s conditional (Stefano) - display log file path after tests so it is easier to find amongst other random names - cleanup qemu pidfile if qemu is unable to remove it - make oops/warning failures more obvious with 'FAIL' prefix in log (simply saying 'detected' wasn't clear enough to identify failing condition) - Link to v5: https://lore.kernel.org/r/20250513-vsock-vmtest-v5-1-4e75c4a45ceb@gmail.com Changes in v5: - make log file a tmpfile (Paolo) - make sure both default and user defined QEMU gets handled by the dependency check (Paolo) - increased VM boot up timeout from 1m to 3m for slow hosts (Paolo) - rename vm_setup -> vm_start (Paolo) - derive wait_for_listener from selftests/net/net_helper.sh to removes ss usage - Remove unused 'unset IFS' line (Paolo) - leave space after variable declarations (Paolo) - make QEMU_PIDFILE a tmp file (Paolo) - make everything readonly that is only read (Paolo) - source ktap_helpers.sh for KSFT_PASS and friends (Paolo) - don't check for timeout util (Paolo) - add missing usage string for -q qemu arg - add tap prefix to SUMMARY line since it isn't part of TAP protocol - exit with the correct status code based on failure/pass counts - Link to v4: https://lore.kernel.org/r/20250507-vsock-vmtest-v4-1-6e2a97262cd6@gmail.com Changes in v4: - do not use special tab delimiter for help string parsing (Stefano + Paolo) - fix paths for when installing kselftest and running out-of-tree (Paolo) - change vng to using running kernel instead of compiled kernel (Paolo) - use multi-line string for QEMU_OPTS (Stefano) - change timeout to 300s (Paolo) - skip if tools are not found and use kselftests status codes (Paolo) - remove build from vmtest.sh (Paolo) - change 2222 -> SSH_HOST_PORT (Stefano) - add tap-format output - add vmtest.log to gitignore - check for vsock_test binary and remind user to build it if missing - create a proper build in makefile - style fixes - add ssh, timeout, and pkill to dependency check, just in case - fix numerical comparison in conditionals - check qemu pidfile exists before proceeding (avoid wasting time waiting for ssh) - fix tracking of pass/fail bug - fix stderr redirection bug - Link to v3: https://lore.kernel.org/r/20250428-vsock-vmtest-v3-1-181af6163f3e@gmail.com Changes in v3: - use common conditional syntax for checking variables - use return value instead of global rc - fix typo TEST_HOST_LISTENER_PORT -> TEST_HOST_PORT_LISTENER - use SIGTERM instead of SIGKILL on cleanup - use peer-cid=1 for loopback - change sleep delay times into globals - fix test_vm_loopback logging - add test selection in arguments - make QEMU an argument - check that vng binary is on path - use QEMU variable - change <tab><backslash> to <space><backslash> - fix hardcoded file paths - add comment in commit msg about script that vmtest.sh was based off of - Add tools/testing/selftest/vsock/Makefile for kselftest - Link to v2: https://lore.kernel.org/r/20250417-vsock-vmtest-v2-1-3901a27331e8@gmail.com Changes in v2: - add kernel oops and warnings checker - change testname variable to use FUNCNAME - fix spacing in test_vm_server_host_client - add -s skip build option to vmtest.sh - add test_vm_loopback - pass port to vm_wait_for_listener - fix indentation in vmtest.sh - add vmci and hyperv to config - changed whitespace from tabs to spaces in help string - Link to v1: https://lore.kernel.org/r/20250410-vsock-vmtest-v1-1-f35a81dab98c@gmail.com --- MAINTAINERS | 1 + tools/testing/selftests/vsock/.gitignore | 2 + tools/testing/selftests/vsock/Makefile | 17 ++ tools/testing/selftests/vsock/config | 114 ++++++++ tools/testing/selftests/vsock/settings | 1 + tools/testing/selftests/vsock/vmtest.sh | 487 +++++++++++++++++++++++++++++++ 6 files changed, 622 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 657a67f9031ef7798c19ac63e6383d4cb18a9e1f..3fbdd7bbfce7196a3cc7db70203317c6bd0e51fd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -25751,6 +25751,7 @@ F: include/uapi/linux/vm_sockets.h F: include/uapi/linux/vm_sockets_diag.h F: include/uapi/linux/vsockmon.h F: net/vmw_vsock/ +F: tools/testing/selftests/vsock/ F: tools/testing/vsock/ VMALLOC diff --git a/tools/testing/selftests/vsock/.gitignore b/tools/testing/selftests/vsock/.gitignore new file mode 100644 index 0000000000000000000000000000000000000000..9c5bf379480f829a14713d5f5dc7d525bc272e84 --- /dev/null +++ b/tools/testing/selftests/vsock/.gitignore @@ -0,0 +1,2 @@ +vmtest.log +vsock_test diff --git a/tools/testing/selftests/vsock/Makefile b/tools/testing/selftests/vsock/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..c407c0afd9388ee692d59a95f304182f067596e9 --- /dev/null +++ b/tools/testing/selftests/vsock/Makefile @@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0 + +CURDIR := $(abspath .) +TOOLSDIR := $(abspath ../../..) +VSOCK_TEST_DIR := $(TOOLSDIR)/testing/vsock +VSOCK_TEST_SRCS := $(wildcard $(VSOCK_TEST_DIR)/*.c $(VSOCK_TEST_DIR)/*.h) + +$(OUTPUT)/vsock_test: $(VSOCK_TEST_DIR)/vsock_test + install -m 755 $< $@ + +$(VSOCK_TEST_DIR)/vsock_test: $(VSOCK_TEST_SRCS) + $(MAKE) -C $(VSOCK_TEST_DIR) vsock_test +TEST_PROGS += vmtest.sh +TEST_GEN_FILES := vsock_test + +include ../lib.mk + diff --git a/tools/testing/selftests/vsock/config b/tools/testing/selftests/vsock/config new file mode 100644 index 0000000000000000000000000000000000000000..3bffaaf98fff92dc0e3bc1286afa3d8d5d52f4c7 --- /dev/null +++ b/tools/testing/selftests/vsock/config @@ -0,0 +1,114 @@ +CONFIG_BLK_DEV_INITRD=y +CONFIG_BPF=y +CONFIG_BPF_SYSCALL=y +CONFIG_BPF_JIT=y +CONFIG_HAVE_EBPF_JIT=y +CONFIG_BPF_EVENTS=y +CONFIG_FTRACE_SYSCALLS=y +CONFIG_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_DYNAMIC_FTRACE=y +CONFIG_HAVE_KPROBES=y +CONFIG_KPROBES=y +CONFIG_KPROBE_EVENTS=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_UPROBES=y +CONFIG_UPROBE_EVENTS=y +CONFIG_DEBUG_FS=y +CONFIG_FW_CFG_SYSFS=y +CONFIG_FW_CFG_SYSFS_CMDLINE=y +CONFIG_DRM=y +CONFIG_DRM_VIRTIO_GPU=y +CONFIG_DRM_VIRTIO_GPU_KMS=y +CONFIG_DRM_BOCHS=y +CONFIG_VIRTIO_IOMMU=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_PCI=y +CONFIG_SND_INTEL8X0=y +CONFIG_SND_HDA_CODEC_REALTEK=y +CONFIG_SECURITYFS=y +CONFIG_CGROUP_BPF=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_XZ=y +CONFIG_SQUASHFS_ZSTD=y +CONFIG_FUSE_FS=y +CONFIG_SERIO=y +CONFIG_PCI=y +CONFIG_INPUT=y +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_X86_VERBOSE_BOOTUP=y +CONFIG_VGA_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_VESA=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_DRV_CMOS=y +CONFIG_HYPERVISOR_GUEST=y +CONFIG_PARAVIRT=y +CONFIG_KVM_GUEST=y +CONFIG_KVM=y +CONFIG_KVM_INTEL=y +CONFIG_KVM_AMD=y +CONFIG_VSOCKETS=y +CONFIG_VSOCKETS_DIAG=y +CONFIG_VSOCKETS_LOOPBACK=y +CONFIG_VMWARE_VMCI_VSOCKETS=y +CONFIG_VIRTIO_VSOCKETS=y +CONFIG_VIRTIO_VSOCKETS_COMMON=y +CONFIG_HYPERV_VSOCKETS=y +CONFIG_VMWARE_VMCI=y +CONFIG_VHOST_VSOCK=y +CONFIG_HYPERV=y +CONFIG_UEVENT_HELPER=n +CONFIG_VIRTIO=y +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_BALLOON=y +CONFIG_NET=y +CONFIG_NET_CORE=y +CONFIG_NETDEVICES=y +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_INET=y +CONFIG_NET_9P=y +CONFIG_NET_9P_VIRTIO=y +CONFIG_9P_FS=y +CONFIG_VIRTIO_NET=y +CONFIG_CMDLINE_OVERRIDE=n +CONFIG_BINFMT_SCRIPT=y +CONFIG_SHMEM=y +CONFIG_TMPFS=y +CONFIG_UNIX=y +CONFIG_MODULE_SIG_FORCE=n +CONFIG_DEVTMPFS=y +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_UNIX98_PTYS=y +CONFIG_EARLY_PRINTK=y +CONFIG_INOTIFY_USER=y +CONFIG_BLOCK=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_SCSI=y +CONFIG_SCSI_VIRTIO=y +CONFIG_BLK_DEV_SD=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +CONFIG_I6300ESB_WDT=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y +CONFIG_OVERLAY_FS=y +CONFIG_DAX=y +CONFIG_DAX_DRIVER=y +CONFIG_FS_DAX=y +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTREMOVE=y +CONFIG_ZONE_DEVICE=y +CONFIG_FUSE_FS=y +CONFIG_VIRTIO_FS=y +CONFIG_VSOCKETS=y +CONFIG_VIRTIO_VSOCKETS=y diff --git a/tools/testing/selftests/vsock/settings b/tools/testing/selftests/vsock/settings new file mode 100644 index 0000000000000000000000000000000000000000..694d70710ff08ac9fc91e9ecb5dbdadcf051f019 --- /dev/null +++ b/tools/testing/selftests/vsock/settings @@ -0,0 +1 @@ +timeout=300 diff --git a/tools/testing/selftests/vsock/vmtest.sh b/tools/testing/selftests/vsock/vmtest.sh new file mode 100755 index 0000000000000000000000000000000000000000..edacebfc163251eee9cd495eb5e704dc7adc958e --- /dev/null +++ b/tools/testing/selftests/vsock/vmtest.sh @@ -0,0 +1,487 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (c) 2025 Meta Platforms, Inc. and affiliates +# +# Dependencies: +# * virtme-ng +# * busybox-static (used by virtme-ng) +# * qemu (used by virtme-ng) + +readonly SCRIPT_DIR="$(cd -P -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd -P)" +readonly KERNEL_CHECKOUT=$(realpath "${SCRIPT_DIR}"/../../../../) + +source "${SCRIPT_DIR}"/../kselftest/ktap_helpers.sh + +readonly VSOCK_TEST="${SCRIPT_DIR}"/vsock_test +readonly TEST_GUEST_PORT=51000 +readonly TEST_HOST_PORT=50000 +readonly TEST_HOST_PORT_LISTENER=50001 +readonly SSH_GUEST_PORT=22 +readonly SSH_HOST_PORT=2222 +readonly VSOCK_CID=1234 +readonly WAIT_PERIOD=3 +readonly WAIT_PERIOD_MAX=60 +readonly WAIT_TOTAL=$(( WAIT_PERIOD * WAIT_PERIOD_MAX )) +readonly QEMU_PIDFILE=$(mktemp /tmp/qemu_vsock_vmtest_XXXX.pid) + +# virtme-ng offers a netdev for ssh when using "--ssh", but we also need a +# control port forwarded for vsock_test. Because virtme-ng doesn't support +# adding an additional port to forward to the device created from "--ssh" and +# virtme-init mistakenly sets identical IPs to the ssh device and additional +# devices, we instead opt out of using --ssh, add the device manually, and also +# add the kernel cmdline options that virtme-init uses to setup the interface. +readonly QEMU_TEST_PORT_FWD="hostfwd=tcp::${TEST_HOST_PORT}-:${TEST_GUEST_PORT}" +readonly QEMU_SSH_PORT_FWD="hostfwd=tcp::${SSH_HOST_PORT}-:${SSH_GUEST_PORT}" +readonly QEMU_OPTS="\ + -netdev user,id=n0,${QEMU_TEST_PORT_FWD},${QEMU_SSH_PORT_FWD} \ + -device virtio-net-pci,netdev=n0 \ + -device vhost-vsock-pci,guest-cid=${VSOCK_CID} \ + --pidfile ${QEMU_PIDFILE} \ +" +readonly KERNEL_CMDLINE="\ + virtme.dhcp net.ifnames=0 biosdevname=0 \ + virtme.ssh virtme_ssh_channel=tcp virtme_ssh_user=$USER \ +" +readonly LOG=$(mktemp /tmp/vsock_vmtest_XXXX.log) +readonly TEST_NAMES=(vm_server_host_client vm_client_host_server vm_loopback) +readonly TEST_DESCS=( + "Run vsock_test in server mode on the VM and in client mode on the host." + "Run vsock_test in client mode on the VM and in server mode on the host." + "Run vsock_test using the loopback transport in the VM." +) + +VERBOSE=0 + +usage() { + local name + local desc + local i + + echo + echo "$0 [OPTIONS] [TEST]..." + echo "If no TEST argument is given, all tests will be run." + echo + echo "Options" + echo " -b: build the kernel from the current source tree and use it for guest VMs" + echo " -q: set the path to or name of qemu binary" + echo " -v: verbose output" + echo + echo "Available tests" + + for ((i = 0; i < ${#TEST_NAMES[@]}; i++)); do + name=${TEST_NAMES[${i}]} + desc=${TEST_DESCS[${i}]} + printf "\t%-35s%-35s\n" "${name}" "${desc}" + done + echo + + exit 1 +} + +die() { + echo "$*" >&2 + exit "${KSFT_FAIL}" +} + +vm_ssh() { + ssh -q -o UserKnownHostsFile=/dev/null -p ${SSH_HOST_PORT} localhost "$@" + return $? +} + +cleanup() { + if [[ -s "${QEMU_PIDFILE}" ]]; then + pkill -SIGTERM -F "${QEMU_PIDFILE}" > /dev/null 2>&1 + fi + + # If failure occurred during or before qemu start up, then we need + # to clean this up ourselves. + if [[ -e "${QEMU_PIDFILE}" ]]; then + rm "${QEMU_PIDFILE}" + fi +} + +check_args() { + local found + + for arg in "$@"; do + found=0 + for name in "${TEST_NAMES[@]}"; do + if [[ "${name}" = "${arg}" ]]; then + found=1 + break + fi + done + + if [[ "${found}" -eq 0 ]]; then + echo "${arg} is not an available test" >&2 + usage + fi + done + + for arg in "$@"; do + if ! command -v > /dev/null "test_${arg}"; then + echo "Test ${arg} not found" >&2 + usage + fi + done +} + +check_deps() { + for dep in vng ${QEMU} busybox pkill ssh; do + if [[ ! -x $(command -v "${dep}") ]]; then + echo -e "skip: dependency ${dep} not found!\n" + exit "${KSFT_SKIP}" + fi + done + + if [[ ! -x $(command -v "${VSOCK_TEST}") ]]; then + printf "skip: %s not found!" "${VSOCK_TEST}" + printf " Please build the kselftest vsock target.\n" + exit "${KSFT_SKIP}" + fi +} + +check_vng() { + local tested_versions + local version + local ok + + tested_versions=("1.33" "1.36") + version="$(vng --version)" + + ok=0 + for tv in "${tested_versions[@]}"; do + if [[ "${version}" == *"${tv}"* ]]; then + ok=1 + break + fi + done + + if [[ ! "${ok}" -eq 1 ]]; then + printf "warning: vng version '%s' has not been tested and may " "${version}" >&2 + printf "not function properly.\n\tThe following versions have been tested: " >&2 + echo "${tested_versions[@]}" >&2 + fi +} + +handle_build() { + if [[ ! "${BUILD}" -eq 1 ]]; then + return + fi + + if [[ ! -d "${KERNEL_CHECKOUT}" ]]; then + echo "-b requires vmtest.sh called from the kernel source tree" >&2 + exit 1 + fi + + pushd "${KERNEL_CHECKOUT}" &>/dev/null + + if ! vng --kconfig --config "${SCRIPT_DIR}"/config; then + die "failed to generate .config for kernel source tree (${KERNEL_CHECKOUT})" + fi + + if ! make -j$(nproc); then + die "failed to build kernel from source tree (${KERNEL_CHECKOUT})" + fi + + popd &>/dev/null +} + +vm_start() { + local logfile=/dev/null + local verbose_opt="" + local kernel_opt="" + local qemu + + qemu=$(command -v "${QEMU}") + + if [[ "${VERBOSE}" -eq 1 ]]; then + verbose_opt="--verbose" + logfile=/dev/stdout + fi + + if [[ "${BUILD}" -eq 1 ]]; then + kernel_opt="${KERNEL_CHECKOUT}" + fi + + vng \ + --run \ + ${kernel_opt} \ + ${verbose_opt} \ + --qemu-opts="${QEMU_OPTS}" \ + --qemu="${qemu}" \ + --user root \ + --append "${KERNEL_CMDLINE}" \ + --rw &> ${logfile} & + + if ! timeout ${WAIT_TOTAL} \ + bash -c 'while [[ ! -s '"${QEMU_PIDFILE}"' ]]; do sleep 1; done; exit 0'; then + die "failed to boot VM" + fi +} + +vm_wait_for_ssh() { + local i + + i=0 + while true; do + if [[ ${i} -gt ${WAIT_PERIOD_MAX} ]]; then + die "Timed out waiting for guest ssh" + fi + if vm_ssh -- true; then + break + fi + i=$(( i + 1 )) + sleep ${WAIT_PERIOD} + done +} + +# derived from selftests/net/net_helper.sh +wait_for_listener() +{ + local port=$1 + local interval=$2 + local max_intervals=$3 + local protocol=tcp + local pattern + local i + + pattern=":$(printf "%04X" "${port}") " + + # for tcp protocol additionally check the socket state + [ "${protocol}" = "tcp" ] && pattern="${pattern}0A" + for i in $(seq "${max_intervals}"); do + if awk '{print $2" "$4}' /proc/net/"${protocol}"* | \ + grep -q "${pattern}"; then + break + fi + sleep "${interval}" + done +} + +vm_wait_for_listener() { + local port=$1 + + vm_ssh <<EOF +$(declare -f wait_for_listener) +wait_for_listener ${port} ${WAIT_PERIOD} ${WAIT_PERIOD_MAX} +EOF +} + +host_wait_for_listener() { + wait_for_listener "${TEST_HOST_PORT_LISTENER}" "${WAIT_PERIOD}" "${WAIT_PERIOD_MAX}" +} + +__log_stdin() { + cat | awk '{ printf "%s:\t%s\n","'"${prefix}"'", $0 }' +} + +__log_args() { + echo "$*" | awk '{ printf "%s:\t%s\n","'"${prefix}"'", $0 }' +} + +log() { + local prefix="$1" + + shift + local redirect= + if [[ ${VERBOSE} -eq 0 ]]; then + redirect=/dev/null + else + redirect=/dev/stdout + fi + + if [[ "$#" -eq 0 ]]; then + __log_stdin | tee -a "${LOG}" > ${redirect} + else + __log_args "$@" | tee -a "${LOG}" > ${redirect} + fi +} + +log_setup() { + log "setup" "$@" +} + +log_host() { + local testname=$1 + + shift + log "test:${testname}:host" "$@" +} + +log_guest() { + local testname=$1 + + shift + log "test:${testname}:guest" "$@" +} + +test_vm_server_host_client() { + local testname="${FUNCNAME[0]#test_}" + + vm_ssh -- "${VSOCK_TEST}" \ + --mode=server \ + --control-port="${TEST_GUEST_PORT}" \ + --peer-cid=2 \ + 2>&1 | log_guest "${testname}" & + + vm_wait_for_listener "${TEST_GUEST_PORT}" + + ${VSOCK_TEST} \ + --mode=client \ + --control-host=127.0.0.1 \ + --peer-cid="${VSOCK_CID}" \ + --control-port="${TEST_HOST_PORT}" 2>&1 | log_host "${testname}" + + return $? +} + +test_vm_client_host_server() { + local testname="${FUNCNAME[0]#test_}" + + ${VSOCK_TEST} \ + --mode "server" \ + --control-port "${TEST_HOST_PORT_LISTENER}" \ + --peer-cid "${VSOCK_CID}" 2>&1 | log_host "${testname}" & + + host_wait_for_listener + + vm_ssh -- "${VSOCK_TEST}" \ + --mode=client \ + --control-host=10.0.2.2 \ + --peer-cid=2 \ + --control-port="${TEST_HOST_PORT_LISTENER}" 2>&1 | log_guest "${testname}" + + return $? +} + +test_vm_loopback() { + local testname="${FUNCNAME[0]#test_}" + local port=60000 # non-forwarded local port + + vm_ssh -- "${VSOCK_TEST}" \ + --mode=server \ + --control-port="${port}" \ + --peer-cid=1 2>&1 | log_guest "${testname}" & + + vm_wait_for_listener "${port}" + + vm_ssh -- "${VSOCK_TEST}" \ + --mode=client \ + --control-host="127.0.0.1" \ + --control-port="${port}" \ + --peer-cid=1 2>&1 | log_guest "${testname}" + + return $? +} + +run_test() { + local host_oops_cnt_before + local host_warn_cnt_before + local vm_oops_cnt_before + local vm_warn_cnt_before + local host_oops_cnt_after + local host_warn_cnt_after + local vm_oops_cnt_after + local vm_warn_cnt_after + local name + local rc + + host_oops_cnt_before=$(dmesg | grep -c -i 'Oops') + host_warn_cnt_before=$(dmesg --level=warn | wc -l) + vm_oops_cnt_before=$(vm_ssh -- dmesg | grep -c -i 'Oops') + vm_warn_cnt_before=$(vm_ssh -- dmesg --level=warn | wc -l) + + name=$(echo "${1}" | awk '{ print $1 }') + eval test_"${name}" + rc=$? + + host_oops_cnt_after=$(dmesg | grep -i 'Oops' | wc -l) + if [[ ${host_oops_cnt_after} -gt ${host_oops_cnt_before} ]]; then + echo "FAIL: kernel oops detected on host" | log_host "${name}" + rc=$KSFT_FAIL + fi + + host_warn_cnt_after=$(dmesg --level=warn | wc -l) + if [[ ${host_warn_cnt_after} -gt ${host_warn_cnt_before} ]]; then + echo "FAIL: kernel warning detected on host" | log_host "${name}" + rc=$KSFT_FAIL + fi + + vm_oops_cnt_after=$(vm_ssh -- dmesg | grep -i 'Oops' | wc -l) + if [[ ${vm_oops_cnt_after} -gt ${vm_oops_cnt_before} ]]; then + echo "FAIL: kernel oops detected on vm" | log_host "${name}" + rc=$KSFT_FAIL + fi + + vm_warn_cnt_after=$(vm_ssh -- dmesg --level=warn | wc -l) + if [[ ${vm_warn_cnt_after} -gt ${vm_warn_cnt_before} ]]; then + echo "FAIL: kernel warning detected on vm" | log_host "${name}" + rc=$KSFT_FAIL + fi + + return "${rc}" +} + +QEMU="qemu-system-$(uname -m)" + +while getopts :hvsq:b o +do + case $o in + v) VERBOSE=1;; + b) BUILD=1;; + q) QEMU=$OPTARG;; + h|*) usage;; + esac +done +shift $((OPTIND-1)) + +trap cleanup EXIT + +if [[ ${#} -eq 0 ]]; then + ARGS=("${TEST_NAMES[@]}") +else + ARGS=("$@") +fi + +check_args "${ARGS[@]}" +check_deps +check_vng +handle_build + +echo "1..${#ARGS[@]}" + +log_setup "Booting up VM" +vm_start +vm_wait_for_ssh +log_setup "VM booted up" + +cnt_pass=0 +cnt_fail=0 +cnt_skip=0 +cnt_total=0 +for arg in "${ARGS[@]}"; do + run_test "${arg}" + rc=$? + if [[ ${rc} -eq $KSFT_PASS ]]; then + cnt_pass=$(( cnt_pass + 1 )) + echo "ok ${cnt_total} ${arg}" + elif [[ ${rc} -eq $KSFT_SKIP ]]; then + cnt_skip=$(( cnt_skip + 1 )) + echo "ok ${cnt_total} ${arg} # SKIP" + elif [[ ${rc} -eq $KSFT_FAIL ]]; then + cnt_fail=$(( cnt_fail + 1 )) + echo "not ok ${cnt_total} ${arg} # exit=$rc" + fi + cnt_total=$(( cnt_total + 1 )) +done + +echo "SUMMARY: PASS=${cnt_pass} SKIP=${cnt_skip} FAIL=${cnt_fail}" +echo "Log: ${LOG}" + +if [ $((cnt_pass + cnt_skip)) -eq ${cnt_total} ]; then + exit "$KSFT_PASS" +else + exit "$KSFT_FAIL" +fi --- base-commit: 8066e388be48f1ad62b0449dc1d31a25489fa12a change-id: 20250325-vsock-vmtest-b3a21d2102c2 Best regards, -- Bobby Eshleman <bobbyeshleman(a)gmail.com>

5 months, 1 week

3
2
0 0

[bug report] selftests/landlock: Add tests for audit flags and domain IDs

by Dan Carpenter

Hello Mickaël Salaün, Commit 6a500b22971c ("selftests/landlock: Add tests for audit flags and domain IDs") from Mar 20, 2025 (linux-next), leads to the following Smatch static checker warning: tools/testing/selftests/landlock/audit.h:408 audit_init_filter_exe() warn: unsigned 'filter->exe_len' is never less than zero. tools/testing/selftests/landlock/audit.h 399 static int audit_init_filter_exe(struct audit_filter *filter, const char *path) 400 { 401 char *absolute_path = NULL; 402 403 /* It is assume that there is not already filtering rules. */ 404 filter->record_type = AUDIT_EXE; 405 if (!path) { 406 filter->exe_len = readlink("/proc/self/exe", filter->exe, 407 sizeof(filter->exe) - 1); --> 408 if (filter->exe_len < 0) size_t can't be negative. 409 return -errno; 410 411 return 0; 412 } 413 414 absolute_path = realpath(path, NULL); 415 if (!absolute_path) 416 return -errno; 417 418 /* No need for the terminating NULL byte. */ 419 filter->exe_len = strlen(absolute_path); 420 if (filter->exe_len > sizeof(filter->exe)) 421 return -E2BIG; 422 423 memcpy(filter->exe, absolute_path, filter->exe_len); 424 free(absolute_path); 425 return 0; 426 } regards, dan carpenter

5 months, 1 week

1
0
0 0

[PATCH net-next] selftests/bpf: Fix bpf selftest build warning

by Saket Kumar Bhaskar

On linux-next, build for bpf selftest displays a warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/if_xdp.h' differs from latest version at 'include/uapi/linux/if_xdp.h'. Commit 8066e388be48 ("net: add UAPI to the header guard in various network headers") changed the header guard from _LINUX_IF_XDP_H to _UAPI_LINUX_IF_XDP_H in include/uapi/linux/if_xdp.h. To resolve the warning, update tools/include/uapi/linux/if_xdp.h to align with the changes in include/uapi/linux/if_xdp.h Fixes: 8066e388be48 ("net: add UAPI to the header guard in various network headers") Reported-by: Venkat Rao Bagalkote <venkat88(a)linux.ibm.com> Closes: https://lore.kernel.org/all/c2bc466d-dff2-4d0d-a797-9af7f676c065@linux.ibm.… Tested-by: Venkat Rao Bagalkote <venkat88(a)linux.ibm.com> Signed-off-by: Saket Kumar Bhaskar <skb99(a)linux.ibm.com> --- tools/include/uapi/linux/if_xdp.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/include/uapi/linux/if_xdp.h b/tools/include/uapi/linux/if_xdp.h index 42869770776e..44f2bb93e7e6 100644 --- a/tools/include/uapi/linux/if_xdp.h +++ b/tools/include/uapi/linux/if_xdp.h @@ -7,8 +7,8 @@ * Magnus Karlsson <magnus.karlsson(a)intel.com> */ -#ifndef _LINUX_IF_XDP_H -#define _LINUX_IF_XDP_H +#ifndef _UAPI_LINUX_IF_XDP_H +#define _UAPI_LINUX_IF_XDP_H #include <linux/types.h> @@ -180,4 +180,4 @@ struct xdp_desc { /* TX packet carries valid metadata. */ #define XDP_TX_METADATA (1 << 1) -#endif /* _LINUX_IF_XDP_H */ +#endif /* _UAPI_LINUX_IF_XDP_H */ -- 2.43.5

5 months, 1 week

3
2
0 0

[PATCH 0/7] Rust KUnit `#[test]` support improvements

by Miguel Ojeda

Improvements that build on top of the very basic `#[test]` support merged in v6.15. They are fairly minimal changes, but they allow us to map `assert*!`s back to KUnit, plus to add support for test functions that return `Result`s. In essence, they get our `#[test]`s essentially on par with the documentation tests. I also took the chance to convert some host `#[test]`s we had to KUnit in order to showcase the feature. Finally, I added documentation that was lacking from the original submission. I hope this helps. Miguel Ojeda (7): rust: kunit: support KUnit-mapped `assert!` macros in `#[test]`s rust: kunit: support checked `-> Result`s in KUnit `#[test]`s rust: add `kunit_tests` to the prelude rust: str: convert `rusttest` tests into KUnit rust: str: take advantage of the `-> Result` support in KUnit `#[test]`'s Documentation: rust: rename `#[test]`s to "`rusttest` host tests" Documentation: rust: testing: add docs on the new KUnit `#[test]` tests Documentation/rust/testing.rst | 80 ++++++++++++++++++++++++++++++++-- init/Kconfig | 3 ++ rust/Makefile | 3 +- rust/kernel/kunit.rs | 29 ++++++++++-- rust/kernel/prelude.rs | 2 +- rust/kernel/str.rs | 76 ++++++++++++++------------------ rust/macros/helpers.rs | 16 +++++++ rust/macros/kunit.rs | 31 ++++++++++++- rust/macros/lib.rs | 6 ++- 9 files changed, 191 insertions(+), 55 deletions(-) base-commit: b4432656b36e5cc1d50a1f2dc15357543add530e -- 2.49.0

5 months, 1 week

7
39
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror