- Linux-kselftest-mirror - lists.linaro.org

[PATCH RFC net-next v4 00/11] vsock: add namespace support to vhost-vsock

by Bobby Eshleman

This series adds namespace support to vhost-vsock. It does not add namespaces to any of the guest transports (virtio-vsock, hyperv, or vmci). The current revision only supports two modes: local or global. Local mode is complete isolation of namespaces, while global mode is complete sharing between namespaces of CIDs (the original behavior). If it is deemed necessary to add mixed mode up front, it is doable but at the cost of more complexity than local and global modes. Mixed will require adding the notion of allocation to the socket lookup functions (like vhost_vsock_get()) and also more logic will be necessary for controlling or using lookups differently based on mixed-to-global or global-to-mixed scenarios. The current implementation takes into consideration the future need for mixed mode and makes sure it is possible by making vsock_ns_mode per-namespace, as for mixed mode we need at least one "global" namespace and one "mixed" namespace for it to work. Is it feasible to support local and global modes only initially? I've demoted this series to RFC, as I haven't been able to re-run the tests after rebasing onto the upstreamed vmtest.sh, some of the code is still pretty messy, there are still some TODOs, stale comments, and other work to do. I thought reviewers might want to see the current state even though unfinished, since I'll be OoO until the second week of July and that just feels like a long time of silence given we've already all done work on this together. Thanks again for everyone's help and reviews! Signed-off-by: Bobby Eshleman <bobbyeshleman(a)gmail.com> --- Changes in v3: - add notion of "modes" - add procfs /proc/net/vsock_ns_mode - local and global modes only - no /dev/vhost-vsock-netns - vmtest.sh already merged, so new patch just adds new tests for NS - Link to v2: https://lore.kernel.org/kvm/20250312-vsock-netns-v2-0-84bffa1aa97a@gmail.com Changes in v2: - only support vhost-vsock namespaces - all g2h namespaces retain old behavior, only common API changes impacted by vhost-vsock changes - add /dev/vhost-vsock-netns for "opt-in" - leave /dev/vhost-vsock to old behavior - removed netns module param - Link to v1: https://lore.kernel.org/r/20200116172428.311437-1-sgarzare@redhat.com Changes in v1: - added 'netns' module param to vsock.ko to enable the network namespace support (disabled by default) - added 'vsock_net_eq()' to check the "net" assigned to a socket only when 'netns' support is enabled - Link to RFC: https://patchwork.ozlabs.org/cover/1202235/ --- Bobby Eshleman (11): selftests/vsock: add NS tests to vmtest.sh vsock: a per-net vsock NS mode state vsock: add vsock net ns helpers vsock: add net to vsock skb cb vsock: add common code for vsock NS support virtio-vsock: add netns to common code vhost/vsock: add netns support vsock/virtio: add netns hooks hv_sock: add netns hooks vsock/vmci: add netns hooks vsock/loopback: add netns support MAINTAINERS | 1 + drivers/vhost/vsock.c | 48 ++- include/linux/virtio_vsock.h | 12 + include/net/af_vsock.h | 53 ++- include/net/net_namespace.h | 4 + include/net/netns/vsock.h | 19 ++ net/vmw_vsock/af_vsock.c | 203 +++++++++++- net/vmw_vsock/hyperv_transport.c | 2 +- net/vmw_vsock/virtio_transport.c | 5 +- net/vmw_vsock/virtio_transport_common.c | 14 +- net/vmw_vsock/vmci_transport.c | 4 +- net/vmw_vsock/vsock_loopback.c | 4 +- tools/testing/selftests/vsock/vmtest.sh | 555 +++++++++++++++++++++++++++++--- 13 files changed, 843 insertions(+), 81 deletions(-) --- base-commit: 8909f5f4ecd551c2299b28e05254b77424c8c7dc change-id: 20250325-vsock-vmtest-b3a21d2102c2 Best regards, -- Bobby Eshleman <bobbyeshleman(a)meta.com>

4 months, 2 weeks

2
12
0 0

selftests ublk UBLK_IO_F_NEED_REG_BUF undeclared

by Naresh Kamboju

The following build warnings / errors noticed while building the selftest/ublk with gcc-13 and clang-nightly toolchains on Linux next tree. Please suggest if I am missing something in my build setup. Regressions found on arm arm64 x86_64 - selftests ublk Regression Analysis: - New regression? Yes - Reproducibility? Yes Build regression: selftests ublk UBLK_IO_F_NEED_REG_BUF undeclared Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> ## Build log CC kublk In file included from kublk.c:6: kublk.h: In function 'ublk_io_auto_zc_fallback': kublk.h:240:35: error: 'UBLK_IO_F_NEED_REG_BUF' undeclared (first use in this function); did you mean 'UBLKSRV_NEED_REG_BUF'? 240 | return !!(iod->op_flags & UBLK_IO_F_NEED_REG_BUF); | ^~~~~~~~~~~~~~~~~~~~~~ | UBLKSRV_NEED_REG_BUF kublk.h:240:35: note: each undeclared identifier is reported only once for each function it appears in kublk.c: In function 'ublk_ctrl_update_size': kublk.c:223:27: error: 'UBLK_U_CMD_UPDATE_SIZE' undeclared (first use in this function) 223 | .cmd_op = UBLK_U_CMD_UPDATE_SIZE, | ^~~~~~~~~~~~~~~~~~~~~~ kublk.c: In function 'ublk_ctrl_quiesce_dev': kublk.c:235:27: error: 'UBLK_U_CMD_QUIESCE_DEV' undeclared (first use in this function); did you mean 'UBLK_U_CMD_DEL_DEV'? 235 | .cmd_op = UBLK_U_CMD_QUIESCE_DEV, | ^~~~~~~~~~~~~~~~~~~~~~ | UBLK_U_CMD_DEL_DEV kublk.c: In function 'ublk_queue_init': kublk.c:447:63: error: 'UBLK_F_AUTO_BUF_REG' undeclared (first use in this function); did you mean 'UBLKSRV_AUTO_BUF_REG'? 447 | if (dev->dev_info.flags & (UBLK_F_SUPPORT_ZERO_COPY | UBLK_F_AUTO_BUF_REG)) { | ^~~~~~~~~~~~~~~~~~~ | UBLKSRV_AUTO_BUF_REG kublk.c: In function 'ublk_thread_init': kublk.c:507:63: error: 'UBLK_F_AUTO_BUF_REG' undeclared (first use in this function); did you mean 'UBLKSRV_AUTO_BUF_REG'? 507 | if (dev->dev_info.flags & (UBLK_F_SUPPORT_ZERO_COPY | UBLK_F_AUTO_BUF_REG)) { | ^~~~~~~~~~~~~~~~~~~ | UBLKSRV_AUTO_BUF_REG kublk.c: In function 'ublk_set_auto_buf_reg': kublk.c:579:16: error: variable 'buf' has initializer but incomplete type 579 | struct ublk_auto_buf_reg buf = {}; | ^~~~~~~~~~~~~~~~~ kublk.c:579:34: error: storage size of 'buf' isn't known 579 | struct ublk_auto_buf_reg buf = {}; | ^~~ kublk.c:587:29: error: 'UBLK_AUTO_BUF_REG_FALLBACK' undeclared (first use in this function); did you mean 'UBLKSRV_AUTO_BUF_REG_FALLBACK'? 587 | buf.flags = UBLK_AUTO_BUF_REG_FALLBACK; | ^~~~~~~~~~~~~~~~~~~~~~~~~~ | UBLKSRV_AUTO_BUF_REG_FALLBACK kublk.c:589:21: error: implicit declaration of function 'ublk_auto_buf_reg_to_sqe_addr' [-Werror=implicit-function-declaration] 589 | sqe->addr = ublk_auto_buf_reg_to_sqe_addr(&buf); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ kublk.c:579:34: error: unused variable 'buf' [-Werror=unused-variable] 579 | struct ublk_auto_buf_reg buf = {}; | ^~~ kublk.c: In function '__cmd_dev_add': kublk.c:1178:25: error: 'UBLK_F_QUIESCE' undeclared (first use in this function) 1178 | if ((features & UBLK_F_QUIESCE) && | ^~~~~~~~~~~~~~ kublk.c: In function 'cmd_dev_get_features': kublk.c:1381:30: error: 'UBLK_F_UPDATE_SIZE' undeclared (first use in this function) 1381 | [const_ilog2(UBLK_F_UPDATE_SIZE)] = "UPDATE_SIZE", | ^~~~~~~~~~~~~~~~~~ kublk.c:1369:46: note: in definition of macro 'const_ilog2' 1369 | #define const_ilog2(x) (63 - __builtin_clzll(x)) | ^ kublk.c:1369:24: error: array index in initializer not of integer type 1369 | #define const_ilog2(x) (63 - __builtin_clzll(x)) | ^ kublk.c:1381:18: note: in expansion of macro 'const_ilog2' 1381 | [const_ilog2(UBLK_F_UPDATE_SIZE)] = "UPDATE_SIZE", | ^~~~~~~~~~~ kublk.c:1369:24: note: (near initialization for 'feat_map') 1369 | #define const_ilog2(x) (63 - __builtin_clzll(x)) | ^ kublk.c:1381:18: note: in expansion of macro 'const_ilog2' 1381 | [const_ilog2(UBLK_F_UPDATE_SIZE)] = "UPDATE_SIZE", | ^~~~~~~~~~~ kublk.c:1382:30: error: 'UBLK_F_AUTO_BUF_REG' undeclared (first use in this function); did you mean 'UBLKSRV_AUTO_BUF_REG'? 1382 | [const_ilog2(UBLK_F_AUTO_BUF_REG)] = "AUTO_BUF_REG", | ^~~~~~~~~~~~~~~~~~~ kublk.c:1369:46: note: in definition of macro 'const_ilog2' 1369 | #define const_ilog2(x) (63 - __builtin_clzll(x)) | ^ kublk.c:1369:24: error: array index in initializer not of integer type 1369 | #define const_ilog2(x) (63 - __builtin_clzll(x)) | ^ kublk.c:1382:18: note: in expansion of macro 'const_ilog2' 1382 | [const_ilog2(UBLK_F_AUTO_BUF_REG)] = "AUTO_BUF_REG", | ^~~~~~~~~~~ kublk.c:1369:24: note: (near initialization for 'feat_map') 1369 | #define const_ilog2(x) (63 - __builtin_clzll(x)) | ^ kublk.c:1382:18: note: in expansion of macro 'const_ilog2' 1382 | [const_ilog2(UBLK_F_AUTO_BUF_REG)] = "AUTO_BUF_REG", | ^~~~~~~~~~~ kublk.c:1383:30: error: 'UBLK_F_QUIESCE' undeclared (first use in this function) 1383 | [const_ilog2(UBLK_F_QUIESCE)] = "QUIESCE", | ^~~~~~~~~~~~~~ kublk.c:1369:46: note: in definition of macro 'const_ilog2' 1369 | #define const_ilog2(x) (63 - __builtin_clzll(x)) | ^ kublk.c:1369:24: error: array index in initializer not of integer type 1369 | #define const_ilog2(x) (63 - __builtin_clzll(x)) | ^ kublk.c:1383:18: note: in expansion of macro 'const_ilog2' 1383 | [const_ilog2(UBLK_F_QUIESCE)] = "QUIESCE", | ^~~~~~~~~~~ kublk.c:1369:24: note: (near initialization for 'feat_map') 1369 | #define const_ilog2(x) (63 - __builtin_clzll(x)) | ^ kublk.c:1383:18: note: in expansion of macro 'const_ilog2' 1383 | [const_ilog2(UBLK_F_QUIESCE)] = "QUIESCE", | ^~~~~~~~~~~ kublk.c:1384:30: error: 'UBLK_F_PER_IO_DAEMON' undeclared (first use in this function) 1384 | [const_ilog2(UBLK_F_PER_IO_DAEMON)] = "PER_IO_DAEMON", | ^~~~~~~~~~~~~~~~~~~~ kublk.c:1369:46: note: in definition of macro 'const_ilog2' 1369 | #define const_ilog2(x) (63 - __builtin_clzll(x)) | ^ kublk.c:1369:24: error: array index in initializer not of integer type 1369 | #define const_ilog2(x) (63 - __builtin_clzll(x)) | ^ kublk.c:1384:18: note: in expansion of macro 'const_ilog2' 1384 | [const_ilog2(UBLK_F_PER_IO_DAEMON)] = "PER_IO_DAEMON", | ^~~~~~~~~~~ kublk.c:1369:24: note: (near initialization for 'feat_map') 1369 | #define const_ilog2(x) (63 - __builtin_clzll(x)) | ^ kublk.c:1384:18: note: in expansion of macro 'const_ilog2' 1384 | [const_ilog2(UBLK_F_PER_IO_DAEMON)] = "PER_IO_DAEMON", | ^~~~~~~~~~~ kublk.c: In function 'main': kublk.c:1613:46: error: 'UBLK_F_AUTO_BUF_REG' undeclared (first use in this function); did you mean 'UBLKSRV_AUTO_BUF_REG'? 1613 | ctx.flags |= UBLK_F_AUTO_BUF_REG; | ^~~~~~~~~~~~~~~~~~~ | UBLKSRV_AUTO_BUF_REG cc1: all warnings being treated as errors ## Source * Kernel version: 6.16.0-rc2 * Git tree: https://kernel.googlesource.com/pub/scm/linux/kernel/git/next/linux-next.git * Git sha: 050f8ad7b58d9079455af171ac279c4b9b828c11 * Git describe: next-20250616 * Project details: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20250616/ * Architectures: arm, arm64, x86_64 * Toolchains: gcc-13, clang nightly * Kconfigs: selftest/*/config+defconfig+ ## Build arm64 * Build log clang: https://regressions.linaro.org/lkft/linux-next-master/next-20250617/log-par… * Build log gcc: https://regressions.linaro.org/lkft/linux-next-master/next-20250617/log-par… * Build details: https://regressions.linaro.org/lkft/linux-next-master/next-20250617/log-par… * Build link: https://storage.tuxsuite.com/public/linaro/lkft/builds/2ycmBy2r4aPm6emlo7FX… * Kernel config: https://storage.tuxsuite.com/public/linaro/lkft/builds/2ycmBy2r4aPm6emlo7FX… ## Steps to reproduce - tuxmake \ --runtime podman \ --target-arch arm64 \ --toolchain gcc-13 \ --kconfig defconfig \ --kconfig-add https://gitlab.com/Linaro/lkft/kernel-fragments/-/raw/main/netdev.config \ --kconfig-add https://gitlab.com/Linaro/lkft/kernel-fragments/-/raw/main/systemd.config \ --kconfig-add CONFIG_SYN_COOKIES=y \ --kconfig-add CONFIG_SCHEDSTATS=y debugkernel dtbs dtbs-legacy headers kernel kselftest modules -- Linaro LKFT https://lkft.linaro.org

4 months, 2 weeks

2
1
0 0

Re: [syzbot] [cgroups?] general protection fault in __cgroup_rstat_lock

by syzbot

syzbot suspects this issue was fixed by commit: commit a97915559f5c5ff1972d678b94fd460c72a3b5f2 Author: JP Kobryn <inwardvessel(a)gmail.com> Date: Fri Apr 4 01:10:48 2025 +0000 cgroup: change rstat function signatures from cgroup-based to css-based bisection log: https://syzkaller.appspot.com/x/bisect.txt?x=12ca4c82580000 start commit: 932fc2f19b74 Merge branch 'irq-save-restore' git tree: bpf-next kernel config: https://syzkaller.appspot.com/x/.config?x=50c7a61469ce77e7 dashboard link: https://syzkaller.appspot.com/bug?extid=31eb4d4e7d9bc1fc1312 syz repro: https://syzkaller.appspot.com/x/repro.syz?x=161cdfc0580000 C reproducer: https://syzkaller.appspot.com/x/repro.c?x=12dfc8df980000 If the result looks correct, please mark the issue as fixed by replying with: #syz fix: cgroup: change rstat function signatures from cgroup-based to css-based For information about bisection process see: https://goo.gl/tpsmEJ#bisection

4 months, 2 weeks

2
2
0 0

clang: selftests/mm gup_longterm error while loading shared libraries liburing.so.2 cannot open shared object file No such file or directory

by Naresh Kamboju

The following test regressions noticed while running selftests/mm gup_longterm test cases on Dragonboard-845c, Dragonboard-410c, rock-pi-4, qemu-arm64 and qemu-x86_64 this build have required selftest/mm/configs included and toolchain is clang nightly. Regressions found on Dragonboard-845c, Dragonboard-410c, rock-pi-4, qemu-arm64 and qemu-x86_64 - selftests mm gup_longterm fails Regression Analysis: - New regression? Yes - Reproducibility? Yes Test regression: selftests mm gup_longterm error while loading shared libraries liburing.so.2 cannot open shared object file No such file or directory Test regression: selftests mm cow error while loading shared libraries liburing.so.2 cannot open shared object file No such file or directory Test regression: selftests mm mlock-random-test exit=139 Test regression: selftests mm pagemap_ioctl exit=1 Test regression: selftests mm guard_regions file hole_punch Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> ## Test log Linux version 6.15.0-next-20250606 (tuxmake@tuxmake) (Debian clang version 21.0.0 (++20250602112323+c5a56f74fef7-1~exp1~20250602112342.1487), Debian LLD 21.0.0) #1 SMP PREEMPT @1749190532 running ./gup_longterm ---------------------- ./gup_longterm: error while loading shared libraries: liburing.so.2: cannot open shared object file: No such file or directory [FAIL] not ok 14 gup_longterm # exit=127 ./cow: error while loading shared libraries: liburing.so.2: cannot open shared object file: No such file or directory [FAIL] not ok 50 cow # exit=127 running ./mlock-random-test --------------------------- TAP version 13 1..2 [ 311.408456] traps: mlock-random-te[21661] general protection fault ip:7f63210dbf0f sp:7ffdff6fca28 error:0 in libc.so.6[adf0f,7f6321056000+165000] [FAIL] not ok 23 mlock-random-test # exit=139 running ./pagemap_ioctl ... ok 53 Huge page testing: only two middle pages dirty ok 54 # SKIP Hugetlb shmem testing: all new pages must not be written (dirty) ok 55 # SKIP Hugetlb shmem testing: all pages must be written (dirty) ok 56 # SKIP Hugetlb shmem testing: all pages dirty other than first and the last one ok 57 # SKIP Hugetlb shmem testing: PM_SCAN_WP_MATCHING | PM_SCAN_CHECK_WPASYNC ok 58 # SKIP Hugetlb shmem testing: only middle page dirty ok 59 # SKIP Hugetlb shmem testing: only two middle pages dirty ok 60 # SKIP Hugetlb mem testing: all new pages must not be written (dirty) ok 61 # SKIP Hugetlb mem testing: all pages must be written (dirty) ok 62 # SKIP Hugetlb mem testing: all pages dirty other than first and the last one ok 63 # SKIP Hugetlb mem testing: PM_SCAN_WP_MATCHING | PM_SCAN_CHECK_WPASYNC[ 241.731600] run_vmtests.sh (456): drop_caches: 3 ok 64 # SKIP Hugetlb mem testing: only middle page dirty ok 65 # SKIP Hugetlb mem testing: only two middle pages dirty Bail out! uffd-test creation failed 12 Cannot allocate memory 12 skipped test(s) detected. Consider enabling relevant config options to improve coverage. Planned tests != run tests (115 != 65) Totals: pass:53 fail:0 xfail:0 xpass:0 skip:12 error:0 [FAIL] # not ok 48 pagemap_ioctl # exit=1 running ./guard-regions ... RUN guard_regions.file.hole_punch ... guard-regions.c:1905:hole_punch:Expected madvise(&ptr[3 * page_size], 4 * page_size, MADV_REMOVE) (-1) == 0 (0) hole_punch: Test terminated by assertion FAIL guard_regions.file.hole_punch not ok 80 guard_regions.file.hole_punch ## Source * Kernel version: 6.16.0-rc2 * Git tree: https://kernel.googlesource.com/pub/scm/linux/kernel/git/next/linux-next.git * Git sha: 050f8ad7b58d9079455af171ac279c4b9b828c11 * Git describe: next-20250616 * Project details: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20250616/ * Architectures: arm64, x86_64 * Test environments: Dragonboard-845c, Dragonboard-410c, rock-pi-4, qemu-arm64, qemu-x86_64 and x86 * Toolchains: clang nightly * Kconfigs: selftest/mm/config+defconfig+ ## Test * Test log: https://qa-reports.linaro.org/api/testruns/28766026/log_file/ * Test log 2: https://qa-reports.linaro.org/api/testruns/28743077/log_file/ * Build details: https://regressions.linaro.org/lkft/linux-next-master/next-20250616/kselfte… * Build link: https://storage.tuxsuite.com/public/linaro/lkft/builds/2ya0viPHafKAe0u89drI… * Kernel config: https://storage.tuxsuite.com/public/linaro/lkft/builds/2ya0viPHafKAe0u89drI… ## Steps to reproduce - tuxrun \ --runtime podman \ --device qemu-x86_64 \ --boot-args rw \ --kernel https://storage.tuxsuite.com/public/linaro/lkft/builds/2ya0wmVl0eHb9koWyQYC… \ --rootfs https://storage.tuxboot.com/debian/20250605/trixie/amd64/rootfs.ext4.xz \ --modules https://storage.tuxsuite.com/public/linaro/lkft/builds/2ya0wmVl0eHb9koWyQYC… /usr/ \ --parameters MODULES_PATH=/usr/ \ --parameters SQUAD_URL=https://qa-reports.linaro.org//api/submit/lkft/linux-next-master/… \ --parameters SKIPFILE=skipfile-lkft.yaml \ --parameters KSELFTEST=https://storage.tuxsuite.com/public/linaro/lkft/builds/2ya0wmVl0e… \ --image docker.io/linaro/tuxrun-dispatcher:v1.2.2 \ --tests kselftest-mm \ --timeouts boot=15 -- Linaro LKFT https://lkft.linaro.org

4 months, 2 weeks

3
3
0 0

[PATCH] Documentation: kunit: Correct MODULE_IMPORT_NS() syntax

by Brian Norris

The argument should be the string "EXPORTED_FOR_KUNIT_TESTING", not a bare identifier. Signed-off-by: Brian Norris <briannorris(a)chromium.org> --- Documentation/dev-tools/kunit/usage.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst index 038f480074fd..066ecda1dd98 100644 --- a/Documentation/dev-tools/kunit/usage.rst +++ b/Documentation/dev-tools/kunit/usage.rst @@ -699,7 +699,7 @@ the template below. #include <kunit/visibility.h> #include <my_file.h> ... - MODULE_IMPORT_NS(EXPORTED_FOR_KUNIT_TESTING); + MODULE_IMPORT_NS("EXPORTED_FOR_KUNIT_TESTING"); ... // Use do_interesting_thing() in tests -- 2.50.0.rc2.692.g299adb8693-goog

4 months, 2 weeks

2
1
0 0

[PATCH net-next v3 15/15] selftests: forwarding: Add a test for verifying VXLAN MC underlay

by Petr Machata

Add tests for MC-routing underlay VXLAN traffic. Signed-off-by: Petr Machata <petrm(a)nvidia.com> --- Notes: v3: - Disable shellchecking apparently-unreachable commands. They are actually reachable through tests_run, in_ns, etc. - Run setup_wait with an explicit argument to avoid shellcheck citation. v2: - Adjust as per shellcheck citations --- CC: Shuah Khan <shuah(a)kernel.org> CC: linux-kselftest(a)vger.kernel.org .../testing/selftests/net/forwarding/Makefile | 1 + .../net/forwarding/vxlan_bridge_1q_mc_ul.sh | 771 ++++++++++++++++++ 2 files changed, 772 insertions(+) create mode 100755 tools/testing/selftests/net/forwarding/vxlan_bridge_1q_mc_ul.sh diff --git a/tools/testing/selftests/net/forwarding/Makefile b/tools/testing/selftests/net/forwarding/Makefile index 00bde7b6f39e..d7bb2e80e88c 100644 --- a/tools/testing/selftests/net/forwarding/Makefile +++ b/tools/testing/selftests/net/forwarding/Makefile @@ -102,6 +102,7 @@ TEST_PROGS = bridge_fdb_learning_limit.sh \ vxlan_bridge_1d_port_8472.sh \ vxlan_bridge_1d.sh \ vxlan_bridge_1q_ipv6.sh \ + vxlan_bridge_1q_mc_ul.sh \ vxlan_bridge_1q_port_8472_ipv6.sh \ vxlan_bridge_1q_port_8472.sh \ vxlan_bridge_1q.sh \ diff --git a/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_mc_ul.sh b/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_mc_ul.sh new file mode 100755 index 000000000000..7ec58b6b1128 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_mc_ul.sh @@ -0,0 +1,771 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# +-----------------------------------------+ +# | + $h1.10 + $h1.20 | +# | | 192.0.2.1/28 | 2001:db8:1::1/64 | +# | \________ ________/ | +# | \ / | +# | + $h1 H1 (vrf) | +# +-----------|-----------------------------+ +# | +# +-----------|----------------------------------------------------------------+ +# | +---------|--------------------------------------+ SWITCH (main vrf) | +# | | + $swp1 BR1 (802.1q) | | +# | | vid 10 20 | | +# | | | | +# | | + vx10 (vxlan) + vx20 (vxlan) | + lo10 (dummy) | +# | | local 192.0.2.100 local 2001:db8:4::1 | 192.0.2.100/28 | +# | | group 233.252.0.1 group ff0e::1:2:3 | 2001:db8:4::1/64 | +# | | id 1000 id 2000 | | +# | | vid 10 pvid untagged vid 20 pvid untagged | | +# | +------------------------------------------------+ | +# | | +# | + $swp2 $swp3 + | +# | | 192.0.2.33/28 192.0.2.65/28 | | +# | | 2001:db8:2::1/64 2001:db8:3::1/64 | | +# | | | | +# +---|--------------------------------------------------------------------|---+ +# | | +# +---|--------------------------------+ +--------------------------------|---+ +# | | H2 (vrf) | | H3 (vrf) | | +# | +-|----------------------------+ | | +-----------------------------|-+ | +# | | + $h2 BR2 (802.1d) | | | | BR3 (802.1d) $h3 + | | +# | | | | | | | | +# | | + v1$h2 (veth) | | | | v1$h3 (veth) + | | +# | +-|----------------------------+ | | +-----------------------------|-+ | +# | | | | | | +# +---|--------------------------------+ +--------------------------------|---+ +# | | +# +---|--------------------------------+ +--------------------------------|---+ +# | + v2$h2 (veth) NS2 (netns) | | NS3 (netns) v2$h3 (veth) + | +# | 192.0.2.34/28 | | 192.0.2.66/28 | +# | 2001:db8:2::2/64 | | 2001:db8:3::2/64 | +# | | | | +# | +--------------------------------+ | | +--------------------------------+ | +# | | BR1 (802.1q) | | | | BR1 (802.1q) | | +# | | + vx10 (vxlan) | | | | + vx10 (vxlan) | | +# | | local 192.0.2.34 | | | | local 192.0.2.50 | | +# | | group 233.252.0.1 dev v2$h2 | | | | group 233.252.0.1 dev v2$h3 | | +# | | id 1000 dstport $VXPORT | | | | id 1000 dstport $VXPORT | | +# | | vid 10 pvid untagged | | | | vid 10 pvid untagged | | +# | | | | | | | | +# | | + vx20 (vxlan) | | | | + vx20 (vxlan) | | +# | | local 2001:db8:2::2 | | | | local 2001:db8:3::2 | | +# | | group ff0e::1:2:3 dev v2$h2 | | | | group ff0e::1:2:3 dev v2$h3 | | +# | | id 2000 dstport $VXPORT | | | | id 2000 dstport $VXPORT | | +# | | vid 20 pvid untagged | | | | vid 20 pvid untagged | | +# | | | | | | | | +# | | + w1 (veth) | | | | + w1 (veth) | | +# | | | vid 10 20 | | | | | vid 10 20 | | +# | +--|-----------------------------+ | | +--|-----------------------------+ | +# | | | | | | +# | +--|-----------------------------+ | | +--|-----------------------------+ | +# | | + w2 (veth) VW2 (vrf) | | | | + w2 (veth) VW2 (vrf) | | +# | | |\ | | | | |\ | | +# | | | + w2.10 | | | | | + w2.10 | | +# | | | 192.0.2.3/28 | | | | | 192.0.2.4/28 | | +# | | | | | | | | | | +# | | + w2.20 | | | | + w2.20 | | +# | | 2001:db8:1::3/64 | | | | 2001:db8:1::4/64 | | +# | +--------------------------------+ | | +--------------------------------+ | +# +------------------------------------+ +------------------------------------+ +# +#shellcheck disable=SC2317 # SC doesn't see our uses of functions. + +: "${VXPORT:=4789}" +export VXPORT + +: "${GROUP4:=233.252.0.1}" +export GROUP4 + +: "${GROUP6:=ff0e::1:2:3}" +export GROUP6 + +: "${IPMR:=lo10}" + +ALL_TESTS=" + ipv4_nomcroute + ipv4_mcroute + ipv4_mcroute_changelink + ipv4_mcroute_starg + ipv4_mcroute_noroute + ipv4_mcroute_fdb + ipv4_mcroute_fdb_oif0 + ipv4_mcroute_fdb_oif0_sep + + ipv6_nomcroute + ipv6_mcroute + ipv6_mcroute_changelink + ipv6_mcroute_starg + ipv6_mcroute_noroute + ipv6_mcroute_fdb + ipv6_mcroute_fdb_oif0 + + ipv4_nomcroute_rx + ipv4_mcroute_rx + ipv4_mcroute_starg_rx + ipv4_mcroute_fdb_oif0_sep_rx + ipv4_mcroute_fdb_sep_rx + + ipv6_nomcroute_rx + ipv6_mcroute_rx + ipv6_mcroute_starg_rx + ipv6_mcroute_fdb_sep_rx +" + +NUM_NETIFS=6 +source lib.sh + +h1_create() +{ + simple_if_init "$h1" + defer simple_if_fini "$h1" + + ip_link_add "$h1.10" master "v$h1" link "$h1" type vlan id 10 + ip_link_set_up "$h1.10" + ip_addr_add "$h1.10" 192.0.2.1/28 + + ip_link_add "$h1.20" master "v$h1" link "$h1" type vlan id 20 + ip_link_set_up "$h1.20" + ip_addr_add "$h1.20" 2001:db8:1::1/64 +} + +install_capture() +{ + local dev=$1; shift + + tc qdisc add dev "$dev" clsact + defer tc qdisc del dev "$dev" clsact + + tc filter add dev "$dev" ingress proto ip pref 104 \ + flower skip_hw ip_proto udp dst_port "$VXPORT" \ + action pass + defer tc filter del dev "$dev" ingress proto ip pref 104 + + tc filter add dev "$dev" ingress proto ipv6 pref 106 \ + flower skip_hw ip_proto udp dst_port "$VXPORT" \ + action pass + defer tc filter del dev "$dev" ingress proto ipv6 pref 106 +} + +h2_create() +{ + # $h2 + ip_link_set_up "$h2" + + # H2 + vrf_create "v$h2" + defer vrf_destroy "v$h2" + + ip_link_set_up "v$h2" + + # br2 + ip_link_add br2 type bridge vlan_filtering 0 mcast_snooping 0 + ip_link_set_master br2 "v$h2" + ip_link_set_up br2 + + # $h2 + ip_link_set_master "$h2" br2 + install_capture "$h2" + + # v1$h2 + ip_link_set_up "v1$h2" + ip_link_set_master "v1$h2" br2 +} + +h3_create() +{ + # $h3 + ip_link_set_up "$h3" + + # H3 + vrf_create "v$h3" + defer vrf_destroy "v$h3" + + ip_link_set_up "v$h3" + + # br3 + ip_link_add br3 type bridge vlan_filtering 0 mcast_snooping 0 + ip_link_set_master br3 "v$h3" + ip_link_set_up br3 + + # $h3 + ip_link_set_master "$h3" br3 + install_capture "$h3" + + # v1$h3 + ip_link_set_up "v1$h3" + ip_link_set_master "v1$h3" br3 +} + +switch_create() +{ + local swp1_mac + + # br1 + swp1_mac=$(mac_get "$swp1") + ip_link_add br1 type bridge vlan_filtering 1 \ + vlan_default_pvid 0 mcast_snooping 0 + ip_link_set_addr br1 "$swp1_mac" + ip_link_set_up br1 + + # A dummy to force the IPv6 OIF=0 test to install a suitable MC route on + # $IPMR to be deterministic. Also used for the IPv6 RX!=TX ping test. + ip_link_add "X$IPMR" up type dummy + + # IPMR + ip_link_add "$IPMR" up type dummy + ip_addr_add "$IPMR" 192.0.2.100/28 + ip_addr_add "$IPMR" 2001:db8:4::1/64 + + # $swp1 + ip_link_set_up "$swp1" + ip_link_set_master "$swp1" br1 + bridge_vlan_add vid 10 dev "$swp1" + bridge_vlan_add vid 20 dev "$swp1" + + # $swp2 + ip_link_set_up "$swp2" + ip_addr_add "$swp2" 192.0.2.33/28 + ip_addr_add "$swp2" 2001:db8:2::1/64 + + # $swp3 + ip_link_set_up "$swp3" + ip_addr_add "$swp3" 192.0.2.65/28 + ip_addr_add "$swp3" 2001:db8:3::1/64 +} + +vx_create() +{ + local name=$1; shift + local vid=$1; shift + + ip_link_add "$name" up type vxlan dstport "$VXPORT" \ + nolearning noudpcsum tos inherit ttl 16 \ + "$@" + ip_link_set_master "$name" br1 + bridge_vlan_add vid "$vid" dev "$name" pvid untagged +} +export -f vx_create + +vx_wait() +{ + # Wait for all the ARP, IGMP etc. noise to settle down so that the + # tunnel is clear for measurements. + sleep 10 +} + +vx10_create() +{ + vx_create vx10 10 id 1000 "$@" +} +export -f vx10_create + +vx20_create() +{ + vx_create vx20 20 id 2000 "$@" +} +export -f vx20_create + +vx10_create_wait() +{ + vx10_create "$@" + vx_wait +} + +vx20_create_wait() +{ + vx20_create "$@" + vx_wait +} + +ns_init_common() +{ + local ns=$1; shift + local if_in=$1; shift + local ipv4_in=$1; shift + local ipv6_in=$1; shift + local ipv4_host=$1; shift + local ipv6_host=$1; shift + + # v2$h2 / v2$h3 + ip_link_set_up "$if_in" + ip_addr_add "$if_in" "$ipv4_in" + ip_addr_add "$if_in" "$ipv6_in" + + # br1 + ip_link_add br1 type bridge vlan_filtering 1 \ + vlan_default_pvid 0 mcast_snooping 0 + ip_link_set_up br1 + + # vx10, vx20 + vx10_create local "${ipv4_in%/*}" group "$GROUP4" dev "$if_in" + vx20_create local "${ipv6_in%/*}" group "$GROUP6" dev "$if_in" + + # w1 + ip_link_add w1 type veth peer name w2 + ip_link_set_master w1 br1 + ip_link_set_up w1 + bridge_vlan_add vid 10 dev w1 + bridge_vlan_add vid 20 dev w1 + + # w2 + simple_if_init w2 + defer simple_if_fini w2 + + # w2.10 + ip_link_add w2.10 master vw2 link w2 type vlan id 10 + ip_link_set_up w2.10 + ip_addr_add w2.10 "$ipv4_host" + + # w2.20 + ip_link_add w2.20 master vw2 link w2 type vlan id 20 + ip_link_set_up w2.20 + ip_addr_add w2.20 "$ipv6_host" +} +export -f ns_init_common + +ns2_create() +{ + # NS2 + ip netns add ns2 + defer ip netns del ns2 + + # v2$h2 + ip link set dev "v2$h2" netns ns2 + defer ip -n ns2 link set dev "v2$h2" netns 1 + + in_ns ns2 \ + ns_init_common ns2 "v2$h2" \ + 192.0.2.34/28 2001:db8:2::2/64 \ + 192.0.2.3/28 2001:db8:1::3/64 +} + +ns3_create() +{ + # NS3 + ip netns add ns3 + defer ip netns del ns3 + + # v2$h3 + ip link set dev "v2$h3" netns ns3 + defer ip -n ns3 link set dev "v2$h3" netns 1 + + ip -n ns3 link set dev "v2$h3" up + + in_ns ns3 \ + ns_init_common ns3 "v2$h3" \ + 192.0.2.66/28 2001:db8:3::2/64 \ + 192.0.2.4/28 2001:db8:1::4/64 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + vrf_prepare + defer vrf_cleanup + + forwarding_enable + defer forwarding_restore + + ip_link_add "v1$h2" type veth peer name "v2$h2" + ip_link_add "v1$h3" type veth peer name "v2$h3" + + h1_create + h2_create + h3_create + switch_create + ns2_create + ns3_create +} + +adf_install_broken_sg() +{ + adf_mcd_start "$IPMR" || exit "$EXIT_STATUS" + + mc_cli add "$swp2" 192.0.2.100 "$GROUP4" "$swp1" "$swp3" + defer mc_cli remove "$swp2" 192.0.2.100 "$GROUP4" "$swp1" "$swp3" + + mc_cli add "$swp2" 2001:db8:4::1 "$GROUP6" "$swp1" "$swp3" + defer mc_cli remove "$swp2" 2001:db8:4::1 "$GROUP6" "$swp1" "$swp3" +} + +adf_install_rx() +{ + mc_cli add "$swp2" 0.0.0.0 "$GROUP4" "$IPMR" + defer mc_cli remove "$swp2" 0.0.0.0 "$GROUP4" lo10 + + mc_cli add "$swp3" 0.0.0.0 "$GROUP4" "$IPMR" + defer mc_cli remove "$swp3" 0.0.0.0 "$GROUP4" lo10 + + mc_cli add "$swp2" :: "$GROUP6" "$IPMR" + defer mc_cli remove "$swp2" :: "$GROUP6" lo10 + + mc_cli add "$swp3" :: "$GROUP6" "$IPMR" + defer mc_cli remove "$swp3" :: "$GROUP6" lo10 +} + +adf_install_sg() +{ + adf_mcd_start "$IPMR" || exit "$EXIT_STATUS" + + mc_cli add "$IPMR" 192.0.2.100 "$GROUP4" "$swp2" "$swp3" + defer mc_cli remove "$IPMR" 192.0.2.33 "$GROUP4" "$swp2" "$swp3" + + mc_cli add "$IPMR" 2001:db8:4::1 "$GROUP6" "$swp2" "$swp3" + defer mc_cli remove "$IPMR" 2001:db8:4::1 "$GROUP6" "$swp2" "$swp3" + + adf_install_rx +} + +adf_install_sg_sep() +{ + adf_mcd_start lo || exit "$EXIT_STATUS" + + mc_cli add lo 192.0.2.120 "$GROUP4" "$swp2" "$swp3" + defer mc_cli remove lo 192.0.2.120 "$GROUP4" "$swp2" "$swp3" + + mc_cli add lo 2001:db8:5::1 "$GROUP6" "$swp2" "$swp3" + defer mc_cli remove lo 2001:db8:5::1 "$GROUP6" "$swp2" "$swp3" +} + +adf_install_sg_sep_rx() +{ + local lo=$1; shift + + adf_mcd_start "$IPMR" "$lo" || exit "$EXIT_STATUS" + + mc_cli add "$lo" 192.0.2.120 "$GROUP4" "$swp2" "$swp3" + defer mc_cli remove "$lo" 192.0.2.120 "$GROUP4" "$swp2" "$swp3" + + mc_cli add "$lo" 2001:db8:5::1 "$GROUP6" "$swp2" "$swp3" + defer mc_cli remove "$lo" 2001:db8:5::1 "$GROUP6" "$swp2" "$swp3" + + adf_install_rx +} + +adf_install_starg() +{ + adf_mcd_start "$IPMR" || exit "$EXIT_STATUS" + + mc_cli add "$IPMR" 0.0.0.0 "$GROUP4" "$swp2" "$swp3" + defer mc_cli remove "$IPMR" 0.0.0.0 "$GROUP4" "$swp2" "$swp3" + + mc_cli add "$IPMR" :: "$GROUP6" "$swp2" "$swp3" + defer mc_cli remove "$IPMR" :: "$GROUP6" "$swp2" "$swp3" + + adf_install_rx +} + +do_packets_v4() +{ + local mac + + mac=$(mac_get "$h2") + "$MZ" "$h1" -Q 10 -c 10 -d 100msec -p 64 -a own -b "$mac" \ + -A 192.0.2.1 -B 192.0.2.2 -t udp sp=1234,dp=2345 -q +} + +do_packets_v6() +{ + local mac + + mac=$(mac_get "$h2") + "$MZ" -6 "$h1" -Q 20 -c 10 -d 100msec -p 64 -a own -b "$mac" \ + -A 2001:db8:1::1 -B 2001:db8:1::2 -t udp sp=1234,dp=2345 -q +} + +do_test() +{ + local ipv=$1; shift + local expect_h2=$1; shift + local expect_h3=$1; shift + local what=$1; shift + + local pref=$((100 + ipv)) + local t0_h2 + local t0_h3 + local t1_h2 + local t1_h3 + local d_h2 + local d_h3 + + RET=0 + + t0_h2=$(tc_rule_stats_get "$h2" "$pref" ingress) + t0_h3=$(tc_rule_stats_get "$h3" "$pref" ingress) + + "do_packets_v$ipv" + sleep 1 + + t1_h2=$(tc_rule_stats_get "$h2" "$pref" ingress) + t1_h3=$(tc_rule_stats_get "$h3" "$pref" ingress) + + d_h2=$((t1_h2 - t0_h2)) + d_h3=$((t1_h3 - t0_h3)) + + ((d_h2 == expect_h2)) + check_err $? "Expected $expect_h2 packets on H2, got $d_h2" + + ((d_h3 == expect_h3)) + check_err $? "Expected $expect_h3 packets on H3, got $d_h3" + + log_test "VXLAN MC flood $what" +} + +ipv4_do_test_rx() +{ + local h3_should_fail=$1; shift + local what=$1; shift + + RET=0 + + ping_do "$h1.10" 192.0.2.3 + check_err $? "H2 should respond" + + ping_do "$h1.10" 192.0.2.4 + check_err_fail "$h3_should_fail" $? "H3 responds" + + log_test "VXLAN MC flood $what" +} + +ipv6_do_test_rx() +{ + local h3_should_fail=$1; shift + local what=$1; shift + + RET=0 + + ping6_do "$h1.20" 2001:db8:1::3 + check_err $? "H2 should respond" + + ping6_do "$h1.20" 2001:db8:1::4 + check_err_fail "$h3_should_fail" $? "H3 responds" + + log_test "VXLAN MC flood $what" +} + +ipv4_nomcroute() +{ + # Install a misleading (S,G) rule to attempt to trick the system into + # pushing the packets elsewhere. + adf_install_broken_sg + vx10_create_wait local 192.0.2.100 group "$GROUP4" dev "$swp2" + do_test 4 10 0 "IPv4 nomcroute" +} + +ipv6_nomcroute() +{ + # Like for IPv4, install a misleading (S,G). + adf_install_broken_sg + vx20_create_wait local 2001:db8:4::1 group "$GROUP6" dev "$swp2" + do_test 6 10 0 "IPv6 nomcroute" +} + +ipv4_nomcroute_rx() +{ + vx10_create local 192.0.2.100 group "$GROUP4" dev "$swp2" + ipv4_do_test_rx 1 "IPv4 nomcroute ping" +} + +ipv6_nomcroute_rx() +{ + vx20_create local 2001:db8:4::1 group "$GROUP6" dev "$swp2" + ipv6_do_test_rx 1 "IPv6 nomcroute ping" +} + +ipv4_mcroute() +{ + adf_install_sg + vx10_create_wait local 192.0.2.100 group "$GROUP4" dev "$IPMR" mcroute + do_test 4 10 10 "IPv4 mcroute" +} + +ipv6_mcroute() +{ + adf_install_sg + vx20_create_wait local 2001:db8:4::1 group "$GROUP6" dev "$IPMR" mcroute + do_test 6 10 10 "IPv6 mcroute" +} + +ipv4_mcroute_rx() +{ + adf_install_sg + vx10_create_wait local 192.0.2.100 group "$GROUP4" dev "$IPMR" mcroute + ipv4_do_test_rx 0 "IPv4 mcroute ping" +} + +ipv6_mcroute_rx() +{ + adf_install_sg + vx20_create_wait local 2001:db8:4::1 group "$GROUP6" dev "$IPMR" mcroute + ipv6_do_test_rx 0 "IPv6 mcroute ping" +} + +ipv4_mcroute_changelink() +{ + adf_install_sg + vx10_create_wait local 192.0.2.100 group "$GROUP4" dev "$IPMR" + ip link set dev vx10 type vxlan mcroute + sleep 1 + do_test 4 10 10 "IPv4 mcroute changelink" +} + +ipv6_mcroute_changelink() +{ + adf_install_sg + vx20_create_wait local 2001:db8:4::1 group "$GROUP6" dev "$IPMR" mcroute + ip link set dev vx20 type vxlan mcroute + sleep 1 + do_test 6 10 10 "IPv6 mcroute changelink" +} + +ipv4_mcroute_starg() +{ + adf_install_starg + vx10_create_wait local 192.0.2.100 group "$GROUP4" dev "$IPMR" mcroute + do_test 4 10 10 "IPv4 mcroute (*,G)" +} + +ipv6_mcroute_starg() +{ + adf_install_starg + vx20_create_wait local 2001:db8:4::1 group "$GROUP6" dev "$IPMR" mcroute + do_test 6 10 10 "IPv6 mcroute (*,G)" +} + +ipv4_mcroute_starg_rx() +{ + adf_install_starg + vx10_create_wait local 192.0.2.100 group "$GROUP4" dev "$IPMR" mcroute + ipv4_do_test_rx 0 "IPv4 mcroute (*,G) ping" +} + +ipv6_mcroute_starg_rx() +{ + adf_install_starg + vx20_create_wait local 2001:db8:4::1 group "$GROUP6" dev "$IPMR" mcroute + ipv6_do_test_rx 0 "IPv6 mcroute (*,G) ping" +} + +ipv4_mcroute_noroute() +{ + vx10_create_wait local 192.0.2.100 group "$GROUP4" dev "$IPMR" mcroute + do_test 4 0 0 "IPv4 mcroute, no route" +} + +ipv6_mcroute_noroute() +{ + vx20_create_wait local 2001:db8:4::1 group "$GROUP6" dev "$IPMR" mcroute + do_test 6 0 0 "IPv6 mcroute, no route" +} + +ipv4_mcroute_fdb() +{ + adf_install_sg + vx10_create_wait local 192.0.2.100 dev "$IPMR" mcroute + bridge fdb add dev vx10 \ + 00:00:00:00:00:00 self static dst "$GROUP4" via "$IPMR" + do_test 4 10 10 "IPv4 mcroute FDB" +} + +ipv6_mcroute_fdb() +{ + adf_install_sg + vx20_create_wait local 2001:db8:4::1 dev "$IPMR" mcroute + bridge -6 fdb add dev vx20 \ + 00:00:00:00:00:00 self static dst "$GROUP6" via "$IPMR" + do_test 6 10 10 "IPv6 mcroute FDB" +} + +# Use FDB to configure VXLAN in a way where oif=0 for purposes of FIB lookup. +ipv4_mcroute_fdb_oif0() +{ + adf_install_sg + vx10_create_wait local 192.0.2.100 group "$GROUP4" dev "$IPMR" mcroute + bridge fdb del dev vx10 00:00:00:00:00:00 + bridge fdb add dev vx10 00:00:00:00:00:00 self static dst "$GROUP4" + do_test 4 10 10 "IPv4 mcroute oif=0" +} + +ipv6_mcroute_fdb_oif0() +{ + # The IPv6 tunnel lookup does not fall back to selection by source + # address. Instead it just does a FIB match, and that would find one of + # the several ff00::/8 multicast routes -- each device has one. In order + # to reliably force the $IPMR device, add a /128 route for the + # destination group address. + ip -6 route add table local multicast "$GROUP6/128" dev "$IPMR" + defer ip -6 route del table local multicast "$GROUP6/128" dev "$IPMR" + + adf_install_sg + vx20_create_wait local 2001:db8:4::1 group "$GROUP6" dev "$IPMR" mcroute + bridge -6 fdb del dev vx20 00:00:00:00:00:00 + bridge -6 fdb add dev vx20 00:00:00:00:00:00 self static dst "$GROUP6" + do_test 6 10 10 "IPv6 mcroute oif=0" +} + +# In oif=0 test as above, have FIB lookup resolve to loopback instead of IPMR. +# This doesn't work with IPv6 -- a MC route on lo would be marked as RTF_REJECT. +ipv4_mcroute_fdb_oif0_sep() +{ + adf_install_sg_sep + + ip_addr_add lo 192.0.2.120/28 + vx10_create_wait local 192.0.2.120 group "$GROUP4" dev "$IPMR" mcroute + bridge fdb del dev vx10 00:00:00:00:00:00 + bridge fdb add dev vx10 00:00:00:00:00:00 self static dst "$GROUP4" + do_test 4 10 10 "IPv4 mcroute TX!=RX oif=0" +} + +ipv4_mcroute_fdb_oif0_sep_rx() +{ + adf_install_sg_sep_rx lo + + ip_addr_add lo 192.0.2.120/28 + vx10_create_wait local 192.0.2.120 group "$GROUP4" dev "$IPMR" mcroute + bridge fdb del dev vx10 00:00:00:00:00:00 + bridge fdb add dev vx10 00:00:00:00:00:00 self static dst "$GROUP4" + ipv4_do_test_rx 0 "IPv4 mcroute TX!=RX oif=0 ping" +} + +ipv4_mcroute_fdb_sep_rx() +{ + adf_install_sg_sep_rx lo + + ip_addr_add lo 192.0.2.120/28 + vx10_create_wait local 192.0.2.120 group "$GROUP4" dev "$IPMR" mcroute + bridge fdb del dev vx10 00:00:00:00:00:00 + bridge fdb add \ + dev vx10 00:00:00:00:00:00 self static dst "$GROUP4" via lo + ipv4_do_test_rx 0 "IPv4 mcroute TX!=RX ping" +} + +ipv6_mcroute_fdb_sep_rx() +{ + adf_install_sg_sep_rx "X$IPMR" + + ip_addr_add "X$IPMR" 2001:db8:5::1/64 + vx20_create_wait local 2001:db8:5::1 group "$GROUP6" dev "$IPMR" mcroute + bridge -6 fdb del dev vx20 00:00:00:00:00:00 + bridge -6 fdb add dev vx20 00:00:00:00:00:00 \ + self static dst "$GROUP6" via "X$IPMR" + ipv6_do_test_rx 0 "IPv6 mcroute TX!=RX ping" +} + +trap cleanup EXIT + +setup_prepare +setup_wait "$NUM_NETIFS" +tests_run + +exit "$EXIT_STATUS" -- 2.49.0

4 months, 2 weeks

1
0
0 0

[PATCH net-next v3 14/15] selftests: forwarding: adf_mcd_start(): Allow configuring custom interfaces

by Petr Machata

Tests may wish to add other interfaces to listen on. Notably locally generated traffic uses dummy interfaces. The multicast daemon needs to know about these so that it allows forming rules that involve these interfaces, and so that net.ipv4.conf.X.mc_forwarding is set for the interfaces. To that end, allow passing in a list of interfaces to configure in addition to all the physical ones. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor(a)blackwall.org> --- Notes: v2: - Adjust as per shellcheck citations - Retain Nik's R-b, the changes were very minor. --- CC: Shuah Khan <shuah(a)kernel.org> CC: linux-kselftest(a)vger.kernel.org tools/testing/selftests/net/forwarding/lib.sh | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 253847372062..83ee6a07e072 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -1760,9 +1760,12 @@ mc_send() adf_mcd_start() { + local ifs=("$@") + local table_name="$MCD_TABLE_NAME" local smcroutedir local pid + local if local i check_command "$MCD" || return 1 @@ -1776,6 +1779,16 @@ adf_mcd_start() "$smcroutedir/$table_name.conf" done + for if in "${ifs[@]}"; do + if ! ip_link_has_flag "$if" MULTICAST; then + ip link set dev "$if" multicast on + defer ip link set dev "$if" multicast off + fi + + echo "phyint $if enable" >> \ + "$smcroutedir/$table_name.conf" + done + "$MCD" -N -I "$table_name" -f "$smcroutedir/$table_name.conf" \ -P "$smcroutedir/$table_name.pid" busywait "$BUSYWAIT_TIMEOUT" test -e "$smcroutedir/$table_name.pid" -- 2.49.0

4 months, 2 weeks

1
0
0 0

[PATCH net-next v3 13/15] selftests: net: lib: Add ip_link_has_flag()

by Petr Machata

Add a helper to determine whether a given netdevice has a given flag. Rewrite ip_link_is_up() in terms of the new helper. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor(a)blackwall.org> --- Notes: CC: Shuah Khan <shuah(a)kernel.org> CC: linux-kselftest(a)vger.kernel.org tools/testing/selftests/net/lib.sh | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/net/lib.sh b/tools/testing/selftests/net/lib.sh index 006fdadcc4b9..ff0dbe23e8e0 100644 --- a/tools/testing/selftests/net/lib.sh +++ b/tools/testing/selftests/net/lib.sh @@ -547,13 +547,19 @@ ip_link_set_addr() defer ip link set dev "$name" address "$old_addr" } -ip_link_is_up() +ip_link_has_flag() { local name=$1; shift + local flag=$1; shift local state=$(ip -j link show "$name" | - jq -r '(.[].flags[] | select(. == "UP")) // "DOWN"') - [[ $state == "UP" ]] + jq --arg flag "$flag" 'any(.[].flags.[]; . == $flag)') + [[ $state == true ]] +} + +ip_link_is_up() +{ + ip_link_has_flag "$1" UP } ip_link_set_up() -- 2.49.0

4 months, 2 weeks

1
0
0 0

[PATCH net-next v3 12/15] selftests: forwarding: lib: Move smcrouted helpers here

by Petr Machata

router_multicast.sh has several helpers for work with smcrouted. Extract them to lib.sh so that other selftests can use them as well. Convert the helpers to defer in the process, because that simplifies the interface quite a bit. Therefore have router_multicast.sh invoke defer_scopes_cleanup() in its cleanup() function. Signed-off-by: Petr Machata <petrm(a)nvidia.com> --- Notes: v2: - Adjust as per shellcheck citations --- CC: Shuah Khan <shuah(a)kernel.org> CC: linux-kselftest(a)vger.kernel.org tools/testing/selftests/net/forwarding/lib.sh | 33 +++++++++++++++++ .../net/forwarding/router_multicast.sh | 35 ++++--------------- 2 files changed, 39 insertions(+), 29 deletions(-) diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 508f3c700d71..253847372062 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -37,6 +37,7 @@ declare -A NETIFS=( : "${TEAMD:=teamd}" : "${MCD:=smcrouted}" : "${MC_CLI:=smcroutectl}" +: "${MCD_TABLE_NAME:=selftests}" # Constants for netdevice bring-up: # Default time in seconds to wait for an interface to come up before giving up @@ -1757,6 +1758,38 @@ mc_send() msend -g $groups -I $if_name -c 1 > /dev/null 2>&1 } +adf_mcd_start() +{ + local table_name="$MCD_TABLE_NAME" + local smcroutedir + local pid + local i + + check_command "$MCD" || return 1 + check_command "$MC_CLI" || return 1 + + smcroutedir=$(mktemp -d) + defer rm -rf "$smcroutedir" + + for ((i = 1; i <= NUM_NETIFS; ++i)); do + echo "phyint ${NETIFS[p$i]} enable" >> \ + "$smcroutedir/$table_name.conf" + done + + "$MCD" -N -I "$table_name" -f "$smcroutedir/$table_name.conf" \ + -P "$smcroutedir/$table_name.pid" + busywait "$BUSYWAIT_TIMEOUT" test -e "$smcroutedir/$table_name.pid" + pid=$(cat "$smcroutedir/$table_name.pid") + defer kill_process "$pid" +} + +mc_cli() +{ + local table_name="$MCD_TABLE_NAME" + + "$MC_CLI" -I "$table_name" "$@" +} + start_ip_monitor() { local mtype=$1; shift diff --git a/tools/testing/selftests/net/forwarding/router_multicast.sh b/tools/testing/selftests/net/forwarding/router_multicast.sh index 5a58b1ec8aef..83e52abdbc2e 100755 --- a/tools/testing/selftests/net/forwarding/router_multicast.sh +++ b/tools/testing/selftests/net/forwarding/router_multicast.sh @@ -33,10 +33,6 @@ NUM_NETIFS=6 source lib.sh source tc_common.sh -require_command $MCD -require_command $MC_CLI -table_name=selftests - h1_create() { simple_if_init $h1 198.51.100.2/28 2001:db8:1::2/64 @@ -149,25 +145,6 @@ router_destroy() ip link set dev $rp1 down } -start_mcd() -{ - SMCROUTEDIR="$(mktemp -d)" - - for ((i = 1; i <= $NUM_NETIFS; ++i)); do - echo "phyint ${NETIFS[p$i]} enable" >> \ - $SMCROUTEDIR/$table_name.conf - done - - $MCD -N -I $table_name -f $SMCROUTEDIR/$table_name.conf \ - -P $SMCROUTEDIR/$table_name.pid -} - -kill_mcd() -{ - pkill $MCD - rm -rf $SMCROUTEDIR -} - setup_prepare() { h1=${NETIFS[p1]} @@ -179,7 +156,7 @@ setup_prepare() rp3=${NETIFS[p5]} h3=${NETIFS[p6]} - start_mcd + adf_mcd_start || exit "$EXIT_STATUS" vrf_prepare @@ -206,7 +183,7 @@ cleanup() vrf_cleanup - kill_mcd + defer_scopes_cleanup } create_mcast_sg() @@ -214,9 +191,9 @@ create_mcast_sg() local if_name=$1; shift local s_addr=$1; shift local mcast=$1; shift - local dest_ifs=${@} + local dest_ifs=("${@}") - $MC_CLI -I $table_name add $if_name $s_addr $mcast $dest_ifs + mc_cli add "$if_name" "$s_addr" "$mcast" "${dest_ifs[@]}" } delete_mcast_sg() @@ -224,9 +201,9 @@ delete_mcast_sg() local if_name=$1; shift local s_addr=$1; shift local mcast=$1; shift - local dest_ifs=${@} + local dest_ifs=("${@}") - $MC_CLI -I $table_name remove $if_name $s_addr $mcast $dest_ifs + mc_cli remove "$if_name" "$s_addr" "$mcast" "${dest_ifs[@]}" } mcast_v4() -- 2.49.0

4 months, 2 weeks

1
0
0 0

[PATCH net-next v3 0/8] netpoll: Untangle netconsole and netpoll

by Breno Leitao

Initially netpoll and netconsole were created together, and some functions are in the wrong file. Seperate netconsole-only functions in netconsole, avoiding exports. 1. Expose netpoll logging macros in the public header to enable consistent log formatting across netpoll consumers. 2. Relocate netconsole-specific functions from netpoll to the netconsole module where they are actually used, reducing unnecessary coupling. 3. Remove unnecessary function exports 4. Rename netpoll parsing functions in netconsole to better reflect their specific usage. 5. Create a test to check that cmdline works fine. This was in my todo list since [1], this was a good time to add it here to make sure this patchset doesn't regress. PS: The code was split in a way that it is easy to review. When copying the functions from netpoll to netconsole, I do not change than other than adding `static`. This will make checkpatch unhappy, but, further patches will address the issues. It is done this way to make it easy for reviewers. Link: https://lore.kernel.org/netdev/Z36TlACdNMwFD7wv@dev-ushankar.dev.purestorag… [1] Signed-off-by: Breno Leitao <leitao(a)debian.org> --- Changes in v3: - The cleanup on the netcons_cmdline.sh test was not cleaning the netdevsim. Clean it at the end of the test. (Jakub) - Link to v2: https://lore.kernel.org/r/20250611-rework-v2-0-ab1d92b458ca@debian.org Changes in v2: - No change in the code. Just rebased the patches onto netnext/main - Link to v1: https://lore.kernel.org/r/20250610-rework-v1-0-7cfde283f246@debian.org --- Breno Leitao (8): netpoll: remove __netpoll_cleanup from exported API netpoll: expose netpoll logging macros in public header netpoll: relocate netconsole-specific functions to netconsole module netpoll: move netpoll_print_options to netconsole netconsole: rename functions to better reflect their purpose netconsole: improve code style in parser function selftests: net: Refactor cleanup logic in lib_netcons.sh selftests: net: add netconsole test for cmdline configuration drivers/net/netconsole.c | 137 ++++++++++++++++++++- include/linux/netpoll.h | 10 +- net/core/netpoll.c | 136 +------------------- tools/testing/selftests/drivers/net/Makefile | 1 + .../selftests/drivers/net/lib/sh/lib_netcons.sh | 59 ++++++--- .../selftests/drivers/net/netcons_cmdline.sh | 52 ++++++++ 6 files changed, 240 insertions(+), 155 deletions(-) --- base-commit: 6d4e01d29d87356924f1521ca6df7a364e948f13 change-id: 20250603-rework-c175cad8d22e Best regards, -- Breno Leitao <leitao(a)debian.org>

4 months, 2 weeks

2
9
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror