- Linux-kselftest-mirror - lists.linaro.org

[RFC][PATCH] selftest: timers: Tweak raw_skew to SKIP when ADJ_OFFSET is in progress

by John Stultz

In the past we've warned when ADJ_OFFSET was in progress, usually caused by ntpd or some other time adjusting daemon running in non steady sate, which can cause the skew calculations to be incorrect Thus, this patch sets a flag which we check when we fail so that we don't cause false negatives. Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Ingo Molnar <mingo(a)kernel.org> Cc: Miroslav Lichvar <mlichvar(a)redhat.com> Cc: Richard Cochran <richardcochran(a)gmail.com> Cc: Prarit Bhargava <prarit(a)redhat.com> Cc: Stephen Boyd <sboyd(a)kernel.org> Cc: Shuah Khan <shuah(a)kernel.org> Cc: linux-kselftest(a)vger.kernel.org Suggested-by: Miroslav Lichvar <mlichvar(a)redhat.com> Signed-off-by: John Stultz <john.stultz(a)linaro.org> --- tools/testing/selftests/timers/raw_skew.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/timers/raw_skew.c b/tools/testing/selftests/timers/raw_skew.c index ca6cd14..d3fc453 100644 --- a/tools/testing/selftests/timers/raw_skew.c +++ b/tools/testing/selftests/timers/raw_skew.c @@ -94,6 +94,7 @@ int main(int argv, char **argc) struct timespec mon, raw, start, end; long long delta1, delta2, interval, eppm, ppm; struct timex tx1, tx2; + int adj_offset_bad = 0; setbuf(stdout, NULL); @@ -108,8 +109,10 @@ int main(int argv, char **argc) start = mon; delta1 = diff_timespec(mon, raw); - if (tx1.offset) + if (tx1.offset) { printf("WARNING: ADJ_OFFSET in progress, this will cause inaccurate results\n"); + adj_offset_bad = 1; + } printf("Estimating clock drift: "); sleep(120); @@ -134,6 +137,10 @@ int main(int argv, char **argc) printf(" %lld.%i(act)", ppm/1000, abs((int)(ppm%1000))); if (llabs(eppm - ppm) > 1000) { + if (adj_offset_bad) { + printf(" [SKIP]\n"); + return ksft_exit_skip("ADJ_OFFSET in progress. Shutdown NTPd or other time steering daemons\n"); + } printf(" [FAILED]\n"); return ksft_exit_fail(); } -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

6 years, 10 months

2
1
0 0

[PATCH net-next 0/2] More mirror-to-gretap tests with bridge in UL

by Petr Machata

This patchset adds two more tests where the mirror-to-gretap has a bridge in underlay packet path, without a VLAN above or below that bridge. In patch #1, a non-VLAN-filtering bridge is tested. In patch #2, a VLAN-filtering bridge is tested. Petr Machata (2): selftests: forwarding: Test mirror-to-gretap w/ UL 802.1d selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q .../net/forwarding/mirror_gre_bridge_1d.sh | 132 +++++++++++++++++++++ .../net/forwarding/mirror_gre_bridge_1q.sh | 126 ++++++++++++++++++++ 2 files changed, 258 insertions(+) create mode 100755 tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d.sh create mode 100755 tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q.sh -- 2.4.11 -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

6 years, 10 months

2
3
0 0

[PATCH] selftests: bpf: config: add config fragments

by Anders Roxell

Tests test_tunnel.sh fails due to config fragments ins't enabled. Fixes: 933a741e3b82 ("selftests/bpf: bpf tunnel test.") Signed-off-by: Anders Roxell <anders.roxell(a)linaro.org> --- All tests passes except ip6gretap that still fails. I'm unsure why. Ideas? Cheers, Anders tools/testing/selftests/bpf/config | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/tools/testing/selftests/bpf/config b/tools/testing/selftests/bpf/config index 1eefe211a4a8..7eb613ffef55 100644 --- a/tools/testing/selftests/bpf/config +++ b/tools/testing/selftests/bpf/config @@ -7,3 +7,13 @@ CONFIG_CGROUP_BPF=y CONFIG_NETDEVSIM=m CONFIG_NET_CLS_ACT=y CONFIG_NET_SCH_INGRESS=y +CONFIG_NET_IPIP=y +CONFIG_IPV6=y +CONFIG_NET_IPGRE_DEMUX=y +CONFIG_NET_IPGRE=y +CONFIG_IPV6_GRE=y +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_SHA256=m +CONFIG_VXLAN=y +CONFIG_GENEVE=y -- 2.17.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

6 years, 10 months

3
9
0 0

[PATCH net-next 00/13] mlxsw: Add resource scale tests

by Petr Machata

There are a number of tests that check features of the Linux networking stack. By running them on suitable interfaces, one can exercise the mlxsw offloading code. However none of these tests attempts to push mlxsw to the limits supported by the ASIC. As an additional wrinkle, the "limits supported by the ASIC" themselves may not be a set of fixed numbers, but rather depend on a profile that determines how the ASIC resources are allocated for different purposes. This patchset introduces several tests that verify capability of mlxsw to offload amounts of routes, flower rules, and mirroring sessions that match predicted ASIC capacity, at different configuration profiles. Additionally they verify that amounts exceeding the predicted capacity can *not* be offloaded. These are not generic tests, but ones that are tailored for mlxsw specifically. For that reason they are not added to net/forwarding selftests subdirectory, but rather to a newly-added drivers/net/mlxsw. Patches #1, #2 and #3 tweak the generic forwarding/lib.sh to support the new additions. In patches #4 and #5, new libraries for interfacing with devlink are introduced, first a generic one, then a Spectrum-specific one. In patch #6, a devlink resource test is introduced. Patches #7 and #8, #9 and #10, and #11 and #12 introduce three scale tests: router, flower and mirror-to-gretap. The first of each pair of patches introduces a generic portion of the test (mlxsw-specific), the second introduces a Spectrum-specific wrapper. Patch #13 then introduces a scale test driver that runs (possibly a subset of) the tests introduced by patches from previous paragraph. Arkadi Sharshevsky (1): selftests: mlxsw: Add router test Petr Machata (8): selftests: forwarding: lib: Add check_err_fail() selftests: forwarding: lib: Parameterize NUM_NETIFS in two functions selftests: forwarding: Add devlink_lib.sh selftests: mlxsw: Add devlink_lib_spectrum.sh selftests: mlxsw: Add tc flower scale test selftests: mlxsw: Add target for tc flower test on spectrum selftests: mlxsw: Add scale test for mirror-to-gretap selftests: mlxsw: Add target for mirror-to-gretap test on spectrum Yuval Mintz (4): selftests: forwarding: Allow lib.sh sourcing from other directories selftests: mlxsw: Add devlink KVD resource test selftests: mlxsw: Add target for router test on spectrum selftests: mlxsw: Add scale test for resources MAINTAINERS | 1 + .../drivers/net/mlxsw/mirror_gre_scale.sh | 197 +++++++++++++++++++++ .../selftests/drivers/net/mlxsw/router_scale.sh | 167 +++++++++++++++++ .../net/mlxsw/spectrum/devlink_lib_spectrum.sh | 119 +++++++++++++ .../net/mlxsw/spectrum/devlink_resources.sh | 117 ++++++++++++ .../drivers/net/mlxsw/spectrum/mirror_gre_scale.sh | 13 ++ .../drivers/net/mlxsw/spectrum/resource_scale.sh | 55 ++++++ .../drivers/net/mlxsw/spectrum/router_scale.sh | 18 ++ .../drivers/net/mlxsw/spectrum/tc_flower_scale.sh | 19 ++ .../selftests/drivers/net/mlxsw/tc_flower_scale.sh | 134 ++++++++++++++ .../selftests/net/forwarding/devlink_lib.sh | 108 +++++++++++ tools/testing/selftests/net/forwarding/lib.sh | 30 +++- 12 files changed, 974 insertions(+), 4 deletions(-) create mode 100644 tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh create mode 100644 tools/testing/selftests/drivers/net/mlxsw/router_scale.sh create mode 100644 tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_lib_spectrum.sh create mode 100755 tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh create mode 100644 tools/testing/selftests/drivers/net/mlxsw/spectrum/mirror_gre_scale.sh create mode 100755 tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh create mode 100644 tools/testing/selftests/drivers/net/mlxsw/spectrum/router_scale.sh create mode 100644 tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_flower_scale.sh create mode 100644 tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh create mode 100644 tools/testing/selftests/net/forwarding/devlink_lib.sh -- 2.4.11 -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

6 years, 10 months

2
14
0 0

[PATCH net-next 0/4] Fixes for running mirror-to-gretap tests on veth

by Petr Machata

The forwarding selftests infrastructure makes it possible to run the individual tests on a purely software netdevices. Names of interfaces to run the test with can be passed as command line arguments to a test. lib.sh then creates veth pairs backing the interfaces if none exist in the system. However, the tests need to recognize that they might be run on a soft device. Many mirror-to-gretap tests are buggy in this regard. This patch set aims to fix the problems in running mirror-to-gretap tests on veth devices. In patch #1, a service function is split out of setup_wait(). In patch #2, installing a trap is made optional. In patch #3, tc filters in several tests are tweaked to work with veth. In patch #4, the logic for waiting for neighbor is fixed for veth. Petr Machata (4): selftests: forwarding: lib: Split out setup_wait_dev() selftests: forwarding: lib: Avoid trapping soft devices selftests: forwarding: Tweak tc filters for mirror-to-gretap tests selftests: forwarding: mirror_gre_changes: Fix waiting for neighbor tools/testing/selftests/net/forwarding/lib.sh | 41 +++++++++++++++------- .../net/forwarding/mirror_gre_bridge_1d_vlan.sh | 6 ++-- .../selftests/net/forwarding/mirror_gre_changes.sh | 11 ++---- .../selftests/net/forwarding/mirror_gre_lib.sh | 2 +- .../net/forwarding/mirror_gre_vlan_bridge_1q.sh | 6 ++-- 5 files changed, 39 insertions(+), 27 deletions(-) -- 2.4.11 -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

6 years, 10 months

2
5
0 0

[PATCH] doc: dev-tools: kselftest.rst: update contributing new tests

by Anders Roxell

Add a description that kernel config options should be added into a config file that is placed next to the newly added test. Signed-off-by: Anders Roxell <anders.roxell(a)linaro.org> --- Documentation/dev-tools/kselftest.rst | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst index 3bf371a938d0..4c546a35bd58 100644 --- a/Documentation/dev-tools/kselftest.rst +++ b/Documentation/dev-tools/kselftest.rst @@ -156,6 +156,9 @@ Contributing new tests (details) installed by the distro on the system should be the primary focus to be able to find regressions. + * If a new test needs specific kernel options, they should be enabled in + then config file in the same directory where the test is added. + Test Harness ============ -- 2.18.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

6 years, 10 months

3
5
0 0

[PATCH v9 0/7] Centralize and unify usage of preempt/irq tracepoints

by Joel Fernandes

From: "Joel Fernandes (Google)" <joel(a)joelfernandes.org> This is a posting of v9 preempt/irq tracepoint clean up series rebased onto v4.18-rc2. No changes in the series, just a rebase + repost. All patches have a Reviewed-by tags now from reviewers. This series has been well tested and is a simplification/refactoring of existing code, along with giving a speed-up for tracepoints using the rcu-idle API. With this our users will find it easier to use tools depending on existing preempt tracepoints since it simplifies the configuration for them. Future enhancements/fixes I am developing for preempt-off tracer will depend on these patches, so I suggest prioritizing these well reviewed and tested patches for that reason as well. Introduction to the series: The preempt/irq tracepoints exist but not everything in the kernel is using it whenever they need to be notified that a preempt disable/enable or an irq disable/enable has occurred. This makes things not work simultaneously (for example, only either lockdep or irqsoff trace-events can be used at a time). This is particularly painful to deal with, since turning on lockdep breaks tracers that install probes on IRQ events, such as the BCC atomic critical section tracer [1]. This constraint also makes it impossible to use synthetic events to trace irqsoff sections with lockdep simulataneously turned on. This series solves that, and also results in a nice clean up of relevant parts of the kernel. Several ifdefs are simpler, and the design is more unified and better. Also as a result of this, we also speeded performance all rcuidle tracepoints since their handling is simpler. [1] https://github.com/iovisor/bcc/blob/master/tools/criticalstat_example.txt v8->v9: - Small style changes to tracepoint code (Mathieu) - Minor style fix to use PTR_ERR_OR_ZERO (0-day bot) - Minor fix to test_atomic_sections to use unsigned long. - Added Namhyung's, Mathieu's Reviewed-by to some patches. - Added Acks from Matsami v7->v8: - Refactored irqsoff tracer probe defines (Namhyung) v6->v7: - Added a module to simulate an atomic section, a kselftest to load and and trigger it which verifies the preempt-tracer and this series. - Fixed a new warning after I rebased in early boot, this is because early_boot_irqs_disabled was set too early, I moved it after the lockdep initialization. - added back the softirq fix since it appears it wasn't picked up. - Ran Ingo's locking API selftest suite which are passing with this series. - Mathieu suggested ifdef'ing the tracepoint_synchronize_unregister function incase tracepoints aren't enabled, did that. Joel Fernandes (Google) (6): srcu: Add notrace variant of srcu_dereference trace/irqsoff: Split reset into separate functions tracepoint: Make rcuidle tracepoint callers use SRCU tracing: Centralize preemptirq tracepoints and unify their usage lib: Add module to simulate atomic sections for testing preemptoff tracers kselftests: Add tests for the preemptoff and irqsoff tracers Paul McKenney (1): srcu: Add notrace variants of srcu_read_{lock,unlock} include/linux/ftrace.h | 11 +- include/linux/irqflags.h | 11 +- include/linux/lockdep.h | 8 +- include/linux/preempt.h | 2 +- include/linux/srcu.h | 22 ++ include/linux/tracepoint.h | 49 +++- include/trace/events/preemptirq.h | 23 +- init/main.c | 5 +- kernel/locking/lockdep.c | 35 +-- kernel/sched/core.c | 2 +- kernel/trace/Kconfig | 22 +- kernel/trace/Makefile | 2 +- kernel/trace/trace_irqsoff.c | 253 ++++++------------ kernel/trace/trace_preemptirq.c | 71 +++++ kernel/tracepoint.c | 16 +- lib/Kconfig.debug | 8 + lib/Makefile | 1 + lib/test_atomic_sections.c | 77 ++++++ tools/testing/selftests/ftrace/config | 3 + .../test.d/preemptirq/irqsoff_tracer.tc | 73 +++++ 20 files changed, 453 insertions(+), 241 deletions(-) create mode 100644 kernel/trace/trace_preemptirq.c create mode 100644 lib/test_atomic_sections.c create mode 100644 tools/testing/selftests/ftrace/test.d/preemptirq/irqsoff_tracer.tc -- 2.18.0.rc2.346.g013aa6912e-goog -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

6 years, 10 months

1
1
0 0

[PATCH] selftests/net: Fix permissions for fib_tests.sh

by Daniel Díaz

fib_tests.sh became non-executable at some point. This is what happens: selftests: net: fib_tests.sh: Warning: file fib_tests.sh is not executable, correct this. not ok 1..11 selftests: net: fib_tests.sh [FAIL] Fixes: d69faad76584 ("selftests: fib_tests: Add prefix route tests with metric") Signed-off-by: Daniel Díaz <daniel.diaz(a)linaro.org> --- tools/testing/selftests/net/fib_tests.sh | 0 1 file changed, 0 insertions(+), 0 deletions(-) mode change 100644 => 100755 tools/testing/selftests/net/fib_tests.sh diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh old mode 100644 new mode 100755 -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

6 years, 10 months

3
2
0 0

[PATCH v3 net-next 0/4] Updates for ipsec selftests

by Shannon Nelson

Fix up the existing ipsec selftest and add tests for the ipsec offload driver API. v2: addressed formatting nits in netdevsim from Jakub Kicinski v3: a couple more nits from Jakub Shannon Nelson (4): selftests: rtnetlink: clear the return code at start of ipsec test selftests: rtnetlink: use dummydev as a test device netdevsim: add ipsec offload testing selftests: rtnetlink: add ipsec offload API test drivers/net/netdevsim/Makefile | 4 + drivers/net/netdevsim/ipsec.c | 345 +++++++++++++++++++++++++++++++ drivers/net/netdevsim/netdev.c | 7 + drivers/net/netdevsim/netdevsim.h | 37 ++++ tools/testing/selftests/net/rtnetlink.sh | 132 +++++++++++- 5 files changed, 518 insertions(+), 7 deletions(-) create mode 100644 drivers/net/netdevsim/ipsec.c -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

6 years, 10 months

3
6
0 0

[PATCH v9 0/7] Centralize and unify usage of preempt/irq tracepoints

by Joel Fernandes

From: "Joel Fernandes (Google)" <joel(a)joelfernandes.org> This is a posting of v9 preempt/irq tracepoint clean up series rebased onto v4.18-rc1. No changes in the series, just a rebase + repost. Maintainers, this series has been well tested and is a simplification/ refactoring of existing code, along with giving a speed-up for tracepoints using the rcu-idle API. I'm hoping for your consideration of this series for the kernel. I am also eager for this so that our users will find it easier to use tools depending on existing preempt tracepoints since it simplifies the configuration for them. All patches now have a Reviewed-by tag except for the kselftest script (7/7). Peter, Ingo, Steve, others, your feedback and Acks are welcomed. Introduction to the series: The preempt/irq tracepoints exist but not everything in the kernel is using it whenever they need to be notified that a preempt disable/enable or an irq disable/enable has occurred. This makes things not work simultaneously (for example, only either lockdep or irqsoff trace-events can be used at a time). This is particularly painful to deal with, since turning on lockdep breaks tracers that install probes on IRQ events, such as the BCC atomic critical section tracer [2]. This constraint also makes it not possible to use synthetic events to trace irqsoff sections with lockdep simulataneously turned on. This series solves that, and also results in a nice clean up of relevant parts of the kernel. Several ifdefs are simpler, and the design is more unified and better. Also as a result of this, we also speeded performance all rcuidle tracepoints since their handling is simpler. [1] https://lkml.org/lkml/2018/6/7/1135 [2] https://github.com/iovisor/bcc/pull/1801/ v8->v9: - Small style changes to tracepoint code (Mathieu) - Minor style fix to use PTR_ERR_OR_ZERO (0-day bot) - Minor fix to test_atomic_sections to use unsigned long. - Added Namhyung's, Mathieu's Reviewed-by to some patches. v7->v8: - Refactored irqsoff tracer probe defines (Namhyung) v6->v7: - Added a module to simulate an atomic section, a kselftest to load and and trigger it which verifies the preempt-tracer and this series. - Fixed a new warning after I rebased in early boot, this is because early_boot_irqs_disabled was set too early, I moved it after the lockdep initialization. - added back the softirq fix since it appears it wasn't picked up. - Ran Ingo's locking API selftest suite which are passing with this series. - Mathieu suggested ifdef'ing the tracepoint_synchronize_unregister function incase tracepoints aren't enabled, did that. Joel Fernandes (Google) (6): srcu: Add notrace variant of srcu_dereference trace/irqsoff: Split reset into separate functions tracepoint: Make rcuidle tracepoint callers use SRCU tracing: Centralize preemptirq tracepoints and unify their usage lib: Add module to simulate atomic sections for testing preemptoff tracers kselftests: Add tests for the preemptoff and irqsoff tracers Paul McKenney (1): srcu: Add notrace variants of srcu_read_{lock,unlock} include/linux/ftrace.h | 11 +- include/linux/irqflags.h | 11 +- include/linux/lockdep.h | 8 +- include/linux/preempt.h | 2 +- include/linux/srcu.h | 22 ++ include/linux/tracepoint.h | 49 +++- include/trace/events/preemptirq.h | 23 +- init/main.c | 5 +- kernel/locking/lockdep.c | 35 +-- kernel/sched/core.c | 2 +- kernel/trace/Kconfig | 22 +- kernel/trace/Makefile | 2 +- kernel/trace/trace_irqsoff.c | 253 ++++++------------ kernel/trace/trace_preemptirq.c | 71 +++++ kernel/tracepoint.c | 16 +- lib/Kconfig.debug | 8 + lib/Makefile | 1 + lib/test_atomic_sections.c | 77 ++++++ tools/testing/selftests/ftrace/config | 3 + .../test.d/preemptirq/irqsoff_tracer.tc | 74 +++++ 20 files changed, 454 insertions(+), 241 deletions(-) create mode 100644 kernel/trace/trace_preemptirq.c create mode 100644 lib/test_atomic_sections.c create mode 100644 tools/testing/selftests/ftrace/test.d/preemptirq/irqsoff_tracer.tc -- 2.18.0.rc2.346.g013aa6912e-goog -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

6 years, 10 months

3
10
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror