- Linux-kselftest-mirror - lists.linaro.org

[PATCH v3 1/2] Provide in-kernel headers for making it easy to extend the kernel

by Joel Fernandes (Google)

Introduce in-kernel headers and other artifacts which are made available as an archive through proc (/proc/kheaders.tar.xz file). This archive makes it possible to build kernel modules, run eBPF programs, and other tracing programs that need to extend the kernel for tracing purposes without any dependency on the file system having headers and build artifacts. On Android and embedded systems, it is common to switch kernels but not have kernel headers available on the file system. Raw kernel headers also cannot be copied into the filesystem like they can be on other distros, due to licensing and other issues. There's no linux-headers package on Android. Further once a different kernel is booted, any headers stored on the file system will no longer be useful. By storing the headers as a compressed archive within the kernel, we can avoid these issues that have been a hindrance for a long time. The feature is also buildable as a module just in case the user desires it not being part of the kernel image. This makes it possible to load and unload the headers on demand. A tracing program, or a kernel module builder can load the module, do its operations, and then unload the module to save kernel memory. The total memory needed is 3.8MB. The code to read the headers is based on /proc/config.gz code and uses the same technique to embed the headers. To build a module, the below steps have been tested on an x86 machine: modprobe kheaders rm -rf $HOME/headers mkdir -p $HOME/headers tar -xvf /proc/kheaders.tar.xz -C $HOME/headers >/dev/null cd my-kernel-module make -C $HOME/headers M=$(pwd) modules rmmod kheaders Additional notes: (1) A limitation of module building with this is, since Module.symvers is not available in the archive due to a cyclic dependency with building of the archive into the kernel or module binaries, the modules built using the archive will not contain symbol versioning (modversion). This is usually not an issue since the idea of this patch is to build a kernel module on the fly and load it into the same kernel. An appropriate warning is already printed by the kernel to alert the user of modules not having modversions when built using the archive. For building with modversions, the user can use traditional header packages. For our tracing usecases, we build modules on the fly with this so it is not a concern. (2) I have left IKHD_ST and IKHD_ED markers as is to facilitate future patches that would extract the headers from a kernel or module image. Signed-off-by: Joel Fernandes (Google) <joel(a)joelfernandes.org> --- Changes since v2: (Thanks to Masahiro Yamada for several excellent suggestions) - Added support for out of tree builds. - Added incremental build support bringing down build time of incremental builds from 50 seconds to 5 seconds. - Fixed various small nits / cleanups. - clean ups to kheaders.c pointed by Alexey Dobriyan. - Fixed MODULE_LICENSE in test module and kheaders.c - Dropped Module.symvers from archive due to circular dependency. Changes since v1: - removed IKH_EXTRA variable, not needed (Masahiro Yamada) - small fix ups to selftest - added target to main Makefile etc - added MODULE_LICENSE to test module - made selftest more quiet Changes since RFC: Both changes bring size down to 3.8MB: - use xz for compression - strip comments except SPDX lines - Call out the module name in Kconfig - Also added selftests in second patch to ensure headers are always working. Other notes: By the way I still see this error (without the patch) when doing a clean build: Makefile:594: include/config/auto.conf: No such file or directory It appears to be because of commit 0a16d2e8cb7e ("kbuild: use 'include' directive to load auto.conf from top Makefile") Documentation/dontdiff | 1 + init/Kconfig | 11 ++++++ kernel/.gitignore | 3 ++ kernel/Makefile | 36 +++++++++++++++++++ kernel/kheaders.c | 72 +++++++++++++++++++++++++++++++++++++ scripts/gen_ikh_data.sh | 76 +++++++++++++++++++++++++++++++++++++++ scripts/strip-comments.pl | 8 +++++ 7 files changed, 207 insertions(+) create mode 100644 kernel/kheaders.c create mode 100755 scripts/gen_ikh_data.sh create mode 100755 scripts/strip-comments.pl diff --git a/Documentation/dontdiff b/Documentation/dontdiff index 2228fcc8e29f..05a2319ee2a2 100644 --- a/Documentation/dontdiff +++ b/Documentation/dontdiff @@ -151,6 +151,7 @@ int8.c kallsyms kconfig keywords.c +kheaders_data.h* ksym.c* ksym.h* kxgettext diff --git a/init/Kconfig b/init/Kconfig index c9386a365eea..63ff0990ae55 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -563,6 +563,17 @@ config IKCONFIG_PROC This option enables access to the kernel configuration file through /proc/config.gz. +config IKHEADERS_PROC + tristate "Enable kernel header artifacts through /proc/kheaders.tar.xz" + select BUILD_BIN2C + depends on PROC_FS + help + This option enables access to the kernel header and other artifacts that + are generated during the build process. These can be used to build kernel + modules, and other in-kernel programs such as those generated by eBPF + and systemtap tools. If you build the headers as a module, a module + called kheaders.ko is built which can be loaded to get access to them. + config LOG_BUF_SHIFT int "Kernel log buffer size (16 => 64KB, 17 => 128KB)" range 12 25 diff --git a/kernel/.gitignore b/kernel/.gitignore index b3097bde4e9c..484018945e93 100644 --- a/kernel/.gitignore +++ b/kernel/.gitignore @@ -3,5 +3,8 @@ # config_data.h config_data.gz +kheaders.md5 +kheaders_data.h +kheaders_data.tar.xz timeconst.h hz.bc diff --git a/kernel/Makefile b/kernel/Makefile index 6aa7543bcdb2..0bc7cacd7da6 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -70,6 +70,7 @@ obj-$(CONFIG_UTS_NS) += utsname.o obj-$(CONFIG_USER_NS) += user_namespace.o obj-$(CONFIG_PID_NS) += pid_namespace.o obj-$(CONFIG_IKCONFIG) += configs.o +obj-$(CONFIG_IKHEADERS_PROC) += kheaders.o obj-$(CONFIG_SMP) += stop_machine.o obj-$(CONFIG_KPROBES_SANITY_TEST) += test_kprobes.o obj-$(CONFIG_AUDIT) += audit.o auditfilter.o @@ -130,3 +131,38 @@ filechk_ikconfiggz = \ targets += config_data.h $(obj)/config_data.h: $(obj)/config_data.gz FORCE $(call filechk,ikconfiggz) + +# Build a list of in-kernel headers for building kernel modules +ikh_file_list := include/ +ikh_file_list += arch/$(SRCARCH)/Makefile +ikh_file_list += arch/$(SRCARCH)/include/ +ikh_file_list += scripts/ +ikh_file_list += Makefile + +# Things we need from the $objtree. "OBJDIR" is for the gen_ikh_data.sh +# script to identify that this comes from the $objtree directory +ikh_file_list += OBJDIR/scripts/ +ikh_file_list += OBJDIR/include/ +ikh_file_list += OBJDIR/arch/$(SRCARCH)/include/ +ifeq ($(CONFIG_STACK_VALIDATION), y) +ikh_file_list += OBJDIR/tools/objtool/objtool +endif + +$(obj)/kheaders.o: $(obj)/kheaders_data.h + +targets += kheaders_data.tar.xz + +quiet_cmd_genikh = GEN $(obj)/kheaders_data.tar.xz +cmd_genikh = $(srctree)/scripts/gen_ikh_data.sh $@ $(ikh_file_list) +$(obj)/kheaders_data.tar.xz: FORCE + $(call cmd,genikh) + +filechk_ikheadersxz = \ + echo "static const char kernel_headers_data[] __used = KH_MAGIC_START"; \ + cat $< | scripts/bin2c; \ + echo "KH_MAGIC_END;" + +targets += kheaders_data.h +targets += kheaders.md5 +$(obj)/kheaders_data.h: $(obj)/kheaders_data.tar.xz FORCE + $(call filechk,ikheadersxz) diff --git a/kernel/kheaders.c b/kernel/kheaders.c new file mode 100644 index 000000000000..46a6358301e5 --- /dev/null +++ b/kernel/kheaders.c @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * kernel/kheaders.c + * Provide headers and artifacts needed to build kernel modules. + * (Borrowed code from kernel/configs.c) + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/proc_fs.h> +#include <linux/init.h> +#include <linux/uaccess.h> + +/* + * Define kernel_headers_data and kernel_headers_data_size, which contains the + * compressed kernel headers. The file is first compressed with xz and then + * bounded by two eight byte magic numbers to allow extraction from a binary + * kernel image: + * + * IKHD_ST + * <image> + * IKHD_ED + */ +#define KH_MAGIC_START "IKHD_ST" +#define KH_MAGIC_END "IKHD_ED" +#include "kheaders_data.h" + + +#define KH_MAGIC_SIZE (sizeof(KH_MAGIC_START) - 1) +#define kernel_headers_data_size \ + (sizeof(kernel_headers_data) - 1 - KH_MAGIC_SIZE * 2) + +static ssize_t +ikheaders_read_current(struct file *file, char __user *buf, + size_t len, loff_t *offset) +{ + return simple_read_from_buffer(buf, len, offset, + kernel_headers_data + KH_MAGIC_SIZE, + kernel_headers_data_size); +} + +static const struct file_operations ikheaders_file_ops = { + .read = ikheaders_read_current, + .llseek = default_llseek, +}; + +static int __init ikheaders_init(void) +{ + struct proc_dir_entry *entry; + + /* create the current headers file */ + entry = proc_create("kheaders.tar.xz", S_IRUGO, NULL, + &ikheaders_file_ops); + if (!entry) + return -ENOMEM; + + proc_set_size(entry, kernel_headers_data_size); + + return 0; +} + +static void __exit ikheaders_cleanup(void) +{ + remove_proc_entry("kheaders.tar.xz", NULL); +} + +module_init(ikheaders_init); +module_exit(ikheaders_cleanup); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Joel Fernandes"); +MODULE_DESCRIPTION("Echo the kernel header artifacts used to build the kernel"); diff --git a/scripts/gen_ikh_data.sh b/scripts/gen_ikh_data.sh new file mode 100755 index 000000000000..7329262bed2f --- /dev/null +++ b/scripts/gen_ikh_data.sh @@ -0,0 +1,76 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +spath="$(dirname "$(readlink -f "$0")")" +kroot="$spath/.." +outdir="$(pwd)" +tarfile=$1 +cpio_dir=$outdir/$tarfile.tmp + +src_file_list="" +for f in $file_list; do + src_file_list="$src_file_list $(echo $f | grep -v OBJDIR)" +done + +obj_file_list="" +for f in $file_list; do + f=$(echo $f | grep OBJDIR | sed -e 's/OBJDIR\///g') + obj_file_list="$obj_file_list $f"; +done + +# Support incremental builds by skipping archive generation +# if timestamps of files being archived are not changed. + +# This block is useful for debugging the incremental builds. +# Uncomment it for debugging. +# iter=1 +# if [ ! -f /tmp/iter ]; then echo 1 > /tmp/iter; +# else; iter=$(($(cat /tmp/iter) + 1)); fi +# find $src_file_list -type f | xargs ls -lR > /tmp/src-ls-$iter +# find $obj_file_list -type f | xargs ls -lR > /tmp/obj-ls-$iter + +# modules.order and include/generated/compile.h are ignored because these are +# touched even when none of the source files changed. This causes pointless +# regeneration, so let us ignore them for md5 calculation. +pushd $kroot > /dev/null +src_files_md5="$(find $src_file_list -type f ! -name modules.order | + grep -v "include/generated/compile.h" | + xargs ls -lR | md5sum | cut -d ' ' -f1)" +popd > /dev/null +obj_files_md5="$(find $obj_file_list -type f ! -name modules.order | + grep -v "include/generated/compile.h" | + xargs ls -lR | md5sum | cut -d ' ' -f1)" + +if [ -f $tarfile ]; then tarfile_md5="$(md5sum $tarfile | cut -d ' ' -f1)"; fi +if [ -f kernel/kheaders.md5 ] && + [ "$(cat kernel/kheaders.md5|head -1)" == "$src_files_md5" ] && + [ "$(cat kernel/kheaders.md5|head -2|tail -1)" == "$obj_files_md5" ] && + [ "$(cat kernel/kheaders.md5|tail -1)" == "$tarfile_md5" ]; then + exit +fi + +rm -rf $cpio_dir +mkdir $cpio_dir + +pushd $kroot > /dev/null +for f in $src_file_list; + do find "$f" ! -name "*.c" ! -name "*.o" ! -name "*.cmd" ! -name ".*"; +done | cpio --quiet -pd $cpio_dir +popd > /dev/null + +# The second CPIO can complain if files already exist which can +# happen with out of tree builds. Just silence CPIO for now. +for f in $obj_file_list; + do find "$f" ! -name "*.c" ! -name "*.o" ! -name "*.cmd" ! -name ".*"; +done | cpio --quiet -pd $cpio_dir >/dev/null 2>&1 + +find $cpio_dir -type f -print0 | + xargs -0 -P8 -n1 -I {} sh -c "$spath/strip-comments.pl {}" + +tar -Jcf $tarfile -C $cpio_dir/ . > /dev/null + +echo "$src_files_md5" > kernel/kheaders.md5 +echo "$obj_files_md5" >> kernel/kheaders.md5 +echo "$(md5sum $tarfile | cut -d ' ' -f1)" >> kernel/kheaders.md5 + +rm -rf $cpio_dir diff --git a/scripts/strip-comments.pl b/scripts/strip-comments.pl new file mode 100755 index 000000000000..f8ada87c5802 --- /dev/null +++ b/scripts/strip-comments.pl @@ -0,0 +1,8 @@ +#!/usr/bin/perl -pi +# SPDX-License-Identifier: GPL-2.0 + +# This script removes /**/ comments from a file, unless such comments +# contain "SPDX". It is used when building compressed in-kernel headers. + +BEGIN {undef $/;} +s/\/\*((?!SPDX).)*?\*\///smg; -- 2.21.0.rc2.261.ga7da99ff1b-goog

5 years, 10 months

8
28
0 0

[PATCH] selftests: x86: add version check in test_syscall_vdso

by Steve Muckle

Since 4.17 registers r8-r11 are not clobbered/zeroed by a 64-bit kernel handling a 32-bit syscall and this behavior is enforced by the test_syscall_vdso testcase. See commit 8bb2610bc496 ("x86/entry/64/compat: Preserve r8-r11 in int $0x80"). Permit the old behavior in the testcase for kernels prior to 4.17. Signed-off-by: Steve Muckle <smuckle(a)google.com> --- .../testing/selftests/x86/test_syscall_vdso.c | 30 +++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/tools/testing/selftests/x86/test_syscall_vdso.c b/tools/testing/selftests/x86/test_syscall_vdso.c index c9c3281077bc..f7284dc4c32b 100644 --- a/tools/testing/selftests/x86/test_syscall_vdso.c +++ b/tools/testing/selftests/x86/test_syscall_vdso.c @@ -30,6 +30,7 @@ #include <sys/time.h> #include <elf.h> #include <sys/ptrace.h> +#include <sys/utsname.h> #include <sys/wait.h> #if !defined(__i386__) @@ -71,6 +72,7 @@ struct regs64 { }; struct regs64 regs64; int kernel_is_64bit; +int clobber_ok; asm ( " .pushsection .text\n" @@ -130,6 +132,28 @@ void print_regs64(void) printf("12:%016llx 13:%016llx 14:%016llx 15:%016llx\n", regs64.r12, regs64.r13, regs64.r14, regs64.r15); } +static void get_kernel_version(int *version, int *patchlevel) +{ + int ret, sublevel; + struct utsname utsname; + + ret = uname(&utsname); + if (ret) { + perror("uname"); + exit(1); + } + + ret = sscanf(utsname.release, "%d.%d.%d", version, patchlevel, + &sublevel); + if (ret < 0) { + perror("sscanf"); + exit(1); + } else if (ret != 3) { + printf("Malformed kernel version %s\n", &utsname.release); + exit(1); + } +} + int check_regs64(void) { int err = 0; @@ -166,6 +190,8 @@ int check_regs64(void) * Historically (and probably unintentionally), they * were clobbered or zeroed. */ + if (clobber_ok && *r64 == 0 && num <= 11) + continue; } printf("[FAIL]\tR%d has changed:%016llx\n", num, *r64); err++; @@ -385,6 +411,7 @@ int main(int argc, char **argv, char **envp) { int exitcode = 0; int cs; + int version, patchlevel; asm("\n" " movl %%cs, %%eax\n" @@ -394,6 +421,9 @@ int main(int argc, char **argv, char **envp) if (!kernel_is_64bit) printf("[NOTE]\tNot a 64-bit kernel, won't test R8..R15 leaks\n"); + get_kernel_version(&version, &patchlevel); + clobber_ok = version < 4 || (version == 4 && patchlevel < 17); + /* This only works for non-static builds: * syscall_addr = dlsym(dlopen("linux-gate.so.1", RTLD_NOW), "__kernel_vsyscall"); */ -- 2.21.0.352.gf09ad66450-goog

5 years, 10 months

4
3
0 0

next-20190301 kselftest results

by ci_notify＠linaro.org

Summary ------------------------------------------------------------------------ kernel: 5.0.0-rc8 git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git git branch: master git commit: c63e9e91a254a529716367234fd8093bb7b061ca git describe: next-20190301 Test details: https://qa-reports.linaro.org/lkft/linux-next-oe/build/next-20190301 Regressions (compared to build next-20190228) ------------------------------------------------------------------------ qemu_arm64: kselftest: * bpf_test_sockmap qemu_x86_64: kselftest: * bpf_test_sockmap Fixes (compared to build next-20190228) ------------------------------------------------------------------------ qemu_arm64: kselftest: * bpf_test_maps * bpf_test_sock_fields In total: ------------------------------------------------------------------------ Ran 444 total tests in the following environments and test suites. pass 312 fail 114 xfail 0 skip 18 Environments -------------- - dragonboard-410c - arm64 - hi6220-hikey - arm64 - i386 - juno-r2 - arm64 - qemu_arm - qemu_arm64 - qemu_i386 - qemu_x86_64 - x15 - arm - x86_64 Test Suites ----------- * kselftest * kselftest-vsyscall-mode-native * kselftest-vsyscall-mode-none Failures ------------------------------------------------------------------------ qemu_arm: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_btf * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_xdp_vlan.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_msg_zerocopy.sh * kselftest/net_psock_snd.sh * kselftest/net_reuseport_bpf_numa * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pidfd_pidfd_test * kselftest/proc_proc-self-syscall * kselftest/pstore_pstore_tests * kselftest/seccomp_seccomp_bpf * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests qemu_x86_64: * kselftest/bpf_test_btf * kselftest/bpf_test_libbpf.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_progs * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_sockmap qemu_i386: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_btf * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcpnotify_user hi6220-hikey: * kselftest/bpf_test_btf * kselftest/bpf_test_progs x86: * kselftest-vsyscall-mode-native/bpf_test_btf * kselftest-vsyscall-mode-native/bpf_test_libbpf.sh * kselftest-vsyscall-mode-native/bpf_test_lirc_mode2_user * kselftest-vsyscall-mode-native/bpf_test_progs * kselftest-vsyscall-mode-native/bpf_test_sock_addr.sh * kselftest-vsyscall-mode-native/bpf_test_sockmap * kselftest/bpf_test_btf * kselftest/bpf_test_libbpf.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_progs * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_sockmap * kselftest-vsyscall-mode-none/bpf_test_btf * kselftest-vsyscall-mode-none/bpf_test_libbpf.sh * kselftest-vsyscall-mode-none/bpf_test_lirc_mode2_user * kselftest-vsyscall-mode-none/bpf_test_progs * kselftest-vsyscall-mode-none/bpf_test_sock_addr.sh * kselftest-vsyscall-mode-none/bpf_test_sockmap qemu_arm64: * kselftest/bpf_test_btf * kselftest/bpf_test_libbpf.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_sockmap dragonboard-410c: * kselftest/bpf_test_btf * kselftest/bpf_test_libbpf.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_sockmap juno-r2: * kselftest/bpf_test_btf * kselftest/bpf_test_libbpf.sh * kselftest/bpf_test_progs * kselftest/bpf_test_sock_addr.sh i386: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_btf * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_maps * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sockmap * kselftest/bpf_test_tcpbpf_user Skips ------------------------------------------------------------------------ No skips -- Linaro LKFT https://lkft.linaro.org

5 years, 10 months

1
0
0 0

[PATCH AUTOSEL 4.9 12/19] selftests: netfilter: add simple masq/redirect test cases

by Sasha Levin

From: Florian Westphal <fw(a)strlen.de> [ Upstream commit 98bfc3414bda335dbd7fec58bde6266f991801d7 ] Check basic nat/redirect/masquerade for ipv4 and ipv6. Signed-off-by: Florian Westphal <fw(a)strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/netfilter/Makefile | 2 +- tools/testing/selftests/netfilter/nft_nat.sh | 762 +++++++++++++++++++ 2 files changed, 763 insertions(+), 1 deletion(-) create mode 100755 tools/testing/selftests/netfilter/nft_nat.sh diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile index 47ed6cef93fb8..c9ff2b47bd1ca 100644 --- a/tools/testing/selftests/netfilter/Makefile +++ b/tools/testing/selftests/netfilter/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 # Makefile for netfilter selftests -TEST_PROGS := nft_trans_stress.sh +TEST_PROGS := nft_trans_stress.sh nft_nat.sh include ../lib.mk diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh new file mode 100755 index 0000000000000..8ec76681605cc --- /dev/null +++ b/tools/testing/selftests/netfilter/nft_nat.sh @@ -0,0 +1,762 @@ +#!/bin/bash +# +# This test is for basic NAT functionality: snat, dnat, redirect, masquerade. +# + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 +ret=0 + +nft --version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without nft tool" + exit $ksft_skip +fi + +ip -Version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +ip netns add ns0 +ip netns add ns1 +ip netns add ns2 + +ip link add veth0 netns ns0 type veth peer name eth0 netns ns1 +ip link add veth1 netns ns0 type veth peer name eth0 netns ns2 + +ip -net ns0 link set lo up +ip -net ns0 link set veth0 up +ip -net ns0 addr add 10.0.1.1/24 dev veth0 +ip -net ns0 addr add dead:1::1/64 dev veth0 + +ip -net ns0 link set veth1 up +ip -net ns0 addr add 10.0.2.1/24 dev veth1 +ip -net ns0 addr add dead:2::1/64 dev veth1 + +for i in 1 2; do + ip -net ns$i link set lo up + ip -net ns$i link set eth0 up + ip -net ns$i addr add 10.0.$i.99/24 dev eth0 + ip -net ns$i route add default via 10.0.$i.1 + ip -net ns$i addr add dead:$i::99/64 dev eth0 + ip -net ns$i route add default via dead:$i::1 +done + +bad_counter() +{ + local ns=$1 + local counter=$2 + local expect=$3 + + echo "ERROR: $counter counter in $ns has unexpected value (expected $expect)" 1>&2 + ip netns exec $ns nft list counter inet filter $counter 1>&2 +} + +check_counters() +{ + ns=$1 + local lret=0 + + cnt=$(ip netns exec $ns nft list counter inet filter ns0in | grep -q "packets 1 bytes 84") + if [ $? -ne 0 ]; then + bad_counter $ns ns0in "packets 1 bytes 84" + lret=1 + fi + cnt=$(ip netns exec $ns nft list counter inet filter ns0out | grep -q "packets 1 bytes 84") + if [ $? -ne 0 ]; then + bad_counter $ns ns0out "packets 1 bytes 84" + lret=1 + fi + + expect="packets 1 bytes 104" + cnt=$(ip netns exec $ns nft list counter inet filter ns0in6 | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter $ns ns0in6 "$expect" + lret=1 + fi + cnt=$(ip netns exec $ns nft list counter inet filter ns0out6 | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter $ns ns0out6 "$expect" + lret=1 + fi + + return $lret +} + +check_ns0_counters() +{ + local ns=$1 + local lret=0 + + cnt=$(ip netns exec ns0 nft list counter inet filter ns0in | grep -q "packets 0 bytes 0") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0in "packets 0 bytes 0" + lret=1 + fi + + cnt=$(ip netns exec ns0 nft list counter inet filter ns0in6 | grep -q "packets 0 bytes 0") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0in6 "packets 0 bytes 0" + lret=1 + fi + + cnt=$(ip netns exec ns0 nft list counter inet filter ns0out | grep -q "packets 0 bytes 0") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0out "packets 0 bytes 0" + lret=1 + fi + cnt=$(ip netns exec ns0 nft list counter inet filter ns0out6 | grep -q "packets 0 bytes 0") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0out6 "packets 0 bytes 0" + lret=1 + fi + + for dir in "in" "out" ; do + expect="packets 1 bytes 84" + cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 $ns$dir "$expect" + lret=1 + fi + + expect="packets 1 bytes 104" + cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir}6 | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 $ns$dir6 "$expect" + lret=1 + fi + done + + return $lret +} + +reset_counters() +{ + for i in 0 1 2;do + ip netns exec ns$i nft reset counters inet > /dev/null + done +} + +test_local_dnat6() +{ + local lret=0 +ip netns exec ns0 nft -f - <<EOF +table ip6 nat { + chain output { + type nat hook output priority 0; policy accept; + ip6 daddr dead:1::99 dnat to dead:2::99 + } +} +EOF + if [ $? -ne 0 ]; then + echo "SKIP: Could not add add ip6 dnat hook" + return $ksft_skip + fi + + # ping netns1, expect rewrite to netns2 + ip netns exec ns0 ping -q -c 1 dead:1::99 > /dev/null + if [ $? -ne 0 ]; then + lret=1 + echo "ERROR: ping6 failed" + return $lret + fi + + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns1$dir "$expect" + lret=1 + fi + done + + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns2$dir "$expect" + lret=1 + fi + done + + # expect 0 count in ns1 + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + # expect 1 packet in ns2 + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns0$dir "$expect" + lret=1 + fi + done + + test $lret -eq 0 && echo "PASS: ipv6 ping to ns1 was NATted to ns2" + ip netns exec ns0 nft flush chain ip6 nat output + + return $lret +} + +test_local_dnat() +{ + local lret=0 +ip netns exec ns0 nft -f - <<EOF +table ip nat { + chain output { + type nat hook output priority 0; policy accept; + ip daddr 10.0.1.99 dnat to 10.0.2.99 + } +} +EOF + # ping netns1, expect rewrite to netns2 + ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null + if [ $? -ne 0 ]; then + lret=1 + echo "ERROR: ping failed" + return $lret + fi + + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns1$dir "$expect" + lret=1 + fi + done + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns2$dir "$expect" + lret=1 + fi + done + + # expect 0 count in ns1 + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + # expect 1 packet in ns2 + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns0$dir "$expect" + lret=1 + fi + done + + test $lret -eq 0 && echo "PASS: ping to ns1 was NATted to ns2" + + ip netns exec ns0 nft flush chain ip nat output + + reset_counters + ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null + if [ $? -ne 0 ]; then + lret=1 + echo "ERROR: ping failed" + return $lret + fi + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns1$dir "$expect" + lret=1 + fi + done + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns2$dir "$expect" + lret=1 + fi + done + + # expect 1 count in ns1 + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0$dir "$expect" + lret=1 + fi + done + + # expect 0 packet in ns2 + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns2$dir "$expect" + lret=1 + fi + done + + test $lret -eq 0 && echo "PASS: ping to ns1 OK after nat output chain flush" + + return $lret +} + + +test_masquerade6() +{ + local lret=0 + + ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null + + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 via ipv6" + return 1 + lret=1 + fi + + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns2$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + reset_counters + +# add masquerading rule +ip netns exec ns0 nft -f - <<EOF +table ip6 nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + meta oif veth0 masquerade + } +} +EOF + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ipv6 masquerading" + lret=1 + fi + + # ns1 should have seen packets from ns0, due to masquerade + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + # ns1 should not have seen packets from ns2, due to masquerade + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + ip netns exec ns0 nft flush chain ip6 nat postrouting + if [ $? -ne 0 ]; then + echo "ERROR: Could not flush ip6 nat postrouting" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IPv6 masquerade for ns2" + + return $lret +} + +test_masquerade() +{ + local lret=0 + + ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null + ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: canot ping ns1 from ns2" + lret=1 + fi + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns2$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + reset_counters + +# add masquerading rule +ip netns exec ns0 nft -f - <<EOF +table ip nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + meta oif veth0 masquerade + } +} +EOF + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ip masquerading" + lret=1 + fi + + # ns1 should have seen packets from ns0, due to masquerade + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + # ns1 should not have seen packets from ns2, due to masquerade + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + ip netns exec ns0 nft flush chain ip nat postrouting + if [ $? -ne 0 ]; then + echo "ERROR: Could not flush nat postrouting" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IP masquerade for ns2" + + return $lret +} + +test_redirect6() +{ + local lret=0 + + ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null + + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannnot ping ns1 from ns2 via ipv6" + lret=1 + fi + + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns2$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + reset_counters + +# add redirect rule +ip netns exec ns0 nft -f - <<EOF +table ip6 nat { + chain prerouting { + type nat hook prerouting priority 0; policy accept; + meta iif veth1 meta l4proto icmpv6 ip6 saddr dead:2::99 ip6 daddr dead:1::99 redirect + } +} +EOF + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ip6 redirect" + lret=1 + fi + + # ns1 should have seen no packets from ns2, due to redirection + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + # ns0 should have seen packets from ns2, due to masquerade + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + ip netns exec ns0 nft delete table ip6 nat + if [ $? -ne 0 ]; then + echo "ERROR: Could not delete ip6 nat table" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IPv6 redirection for ns2" + + return $lret +} + +test_redirect() +{ + local lret=0 + + ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null + ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2" + lret=1 + fi + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns2$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + reset_counters + +# add redirect rule +ip netns exec ns0 nft -f - <<EOF +table ip nat { + chain prerouting { + type nat hook prerouting priority 0; policy accept; + meta iif veth1 ip protocol icmp ip saddr 10.0.2.99 ip daddr 10.0.1.99 redirect + } +} +EOF + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ip redirect" + lret=1 + fi + + # ns1 should have seen no packets from ns2, due to redirection + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + # ns0 should have seen packets from ns2, due to masquerade + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + ip netns exec ns0 nft delete table ip nat + if [ $? -ne 0 ]; then + echo "ERROR: Could not delete nat table" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IP redirection for ns2" + + return $lret +} + + +# ip netns exec ns0 ping -c 1 -q 10.0.$i.99 +for i in 0 1 2; do +ip netns exec ns$i nft -f - <<EOF +table inet filter { + counter ns0in {} + counter ns1in {} + counter ns2in {} + + counter ns0out {} + counter ns1out {} + counter ns2out {} + + counter ns0in6 {} + counter ns1in6 {} + counter ns2in6 {} + + counter ns0out6 {} + counter ns1out6 {} + counter ns2out6 {} + + map nsincounter { + type ipv4_addr : counter + elements = { 10.0.1.1 : "ns0in", + 10.0.2.1 : "ns0in", + 10.0.1.99 : "ns1in", + 10.0.2.99 : "ns2in" } + } + + map nsincounter6 { + type ipv6_addr : counter + elements = { dead:1::1 : "ns0in6", + dead:2::1 : "ns0in6", + dead:1::99 : "ns1in6", + dead:2::99 : "ns2in6" } + } + + map nsoutcounter { + type ipv4_addr : counter + elements = { 10.0.1.1 : "ns0out", + 10.0.2.1 : "ns0out", + 10.0.1.99: "ns1out", + 10.0.2.99: "ns2out" } + } + + map nsoutcounter6 { + type ipv6_addr : counter + elements = { dead:1::1 : "ns0out6", + dead:2::1 : "ns0out6", + dead:1::99 : "ns1out6", + dead:2::99 : "ns2out6" } + } + + chain input { + type filter hook input priority 0; policy accept; + counter name ip saddr map @nsincounter + icmpv6 type { "echo-request", "echo-reply" } counter name ip6 saddr map @nsincounter6 + } + chain output { + type filter hook output priority 0; policy accept; + counter name ip daddr map @nsoutcounter + icmpv6 type { "echo-request", "echo-reply" } counter name ip6 daddr map @nsoutcounter6 + } +} +EOF +done + +sleep 3 +# test basic connectivity +for i in 1 2; do + ip netns exec ns0 ping -c 1 -q 10.0.$i.99 > /dev/null + if [ $? -ne 0 ];then + echo "ERROR: Could not reach other namespace(s)" 1>&2 + ret=1 + fi + + ip netns exec ns0 ping -c 1 -q dead:$i::99 > /dev/null + if [ $? -ne 0 ];then + echo "ERROR: Could not reach other namespace(s) via ipv6" 1>&2 + ret=1 + fi + check_counters ns$i + if [ $? -ne 0 ]; then + ret=1 + fi + + check_ns0_counters ns$i + if [ $? -ne 0 ]; then + ret=1 + fi + reset_counters +done + +if [ $ret -eq 0 ];then + echo "PASS: netns routing/connectivity: ns0 can reach ns1 and ns2" +fi + +reset_counters +test_local_dnat +test_local_dnat6 + +reset_counters +test_masquerade +test_masquerade6 + +reset_counters +test_redirect +test_redirect6 + +for i in 0 1 2; do ip netns del ns$i;done + +exit $ret -- 2.19.1

5 years, 10 months

1
0
0 0

[PATCH AUTOSEL 4.9 11/19] selftests: netfilter: fix config fragment CONFIG_NF_TABLES_INET

by Sasha Levin

From: Naresh Kamboju <naresh.kamboju(a)linaro.org> [ Upstream commit 952b72f89ae23b316da8c1021b18d0c388ad6cc4 ] In selftests the config fragment for netfilter was added as NF_TABLES_INET=y and this patch correct it as CONFIG_NF_TABLES_INET=y Signed-off-by: Naresh Kamboju <naresh.kamboju(a)linaro.org> Acked-by: Florian Westphal <fw(a)strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/netfilter/config | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/netfilter/config b/tools/testing/selftests/netfilter/config index 1017313e41a85..59caa8f71cd80 100644 --- a/tools/testing/selftests/netfilter/config +++ b/tools/testing/selftests/netfilter/config @@ -1,2 +1,2 @@ CONFIG_NET_NS=y -NF_TABLES_INET=y +CONFIG_NF_TABLES_INET=y -- 2.19.1

5 years, 10 months

1
0
0 0

[PATCH AUTOSEL 4.14 26/36] selftests: netfilter: add simple masq/redirect test cases

by Sasha Levin

From: Florian Westphal <fw(a)strlen.de> [ Upstream commit 98bfc3414bda335dbd7fec58bde6266f991801d7 ] Check basic nat/redirect/masquerade for ipv4 and ipv6. Signed-off-by: Florian Westphal <fw(a)strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/netfilter/Makefile | 2 +- tools/testing/selftests/netfilter/nft_nat.sh | 762 +++++++++++++++++++ 2 files changed, 763 insertions(+), 1 deletion(-) create mode 100755 tools/testing/selftests/netfilter/nft_nat.sh diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile index 47ed6cef93fb8..c9ff2b47bd1ca 100644 --- a/tools/testing/selftests/netfilter/Makefile +++ b/tools/testing/selftests/netfilter/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 # Makefile for netfilter selftests -TEST_PROGS := nft_trans_stress.sh +TEST_PROGS := nft_trans_stress.sh nft_nat.sh include ../lib.mk diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh new file mode 100755 index 0000000000000..8ec76681605cc --- /dev/null +++ b/tools/testing/selftests/netfilter/nft_nat.sh @@ -0,0 +1,762 @@ +#!/bin/bash +# +# This test is for basic NAT functionality: snat, dnat, redirect, masquerade. +# + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 +ret=0 + +nft --version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without nft tool" + exit $ksft_skip +fi + +ip -Version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +ip netns add ns0 +ip netns add ns1 +ip netns add ns2 + +ip link add veth0 netns ns0 type veth peer name eth0 netns ns1 +ip link add veth1 netns ns0 type veth peer name eth0 netns ns2 + +ip -net ns0 link set lo up +ip -net ns0 link set veth0 up +ip -net ns0 addr add 10.0.1.1/24 dev veth0 +ip -net ns0 addr add dead:1::1/64 dev veth0 + +ip -net ns0 link set veth1 up +ip -net ns0 addr add 10.0.2.1/24 dev veth1 +ip -net ns0 addr add dead:2::1/64 dev veth1 + +for i in 1 2; do + ip -net ns$i link set lo up + ip -net ns$i link set eth0 up + ip -net ns$i addr add 10.0.$i.99/24 dev eth0 + ip -net ns$i route add default via 10.0.$i.1 + ip -net ns$i addr add dead:$i::99/64 dev eth0 + ip -net ns$i route add default via dead:$i::1 +done + +bad_counter() +{ + local ns=$1 + local counter=$2 + local expect=$3 + + echo "ERROR: $counter counter in $ns has unexpected value (expected $expect)" 1>&2 + ip netns exec $ns nft list counter inet filter $counter 1>&2 +} + +check_counters() +{ + ns=$1 + local lret=0 + + cnt=$(ip netns exec $ns nft list counter inet filter ns0in | grep -q "packets 1 bytes 84") + if [ $? -ne 0 ]; then + bad_counter $ns ns0in "packets 1 bytes 84" + lret=1 + fi + cnt=$(ip netns exec $ns nft list counter inet filter ns0out | grep -q "packets 1 bytes 84") + if [ $? -ne 0 ]; then + bad_counter $ns ns0out "packets 1 bytes 84" + lret=1 + fi + + expect="packets 1 bytes 104" + cnt=$(ip netns exec $ns nft list counter inet filter ns0in6 | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter $ns ns0in6 "$expect" + lret=1 + fi + cnt=$(ip netns exec $ns nft list counter inet filter ns0out6 | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter $ns ns0out6 "$expect" + lret=1 + fi + + return $lret +} + +check_ns0_counters() +{ + local ns=$1 + local lret=0 + + cnt=$(ip netns exec ns0 nft list counter inet filter ns0in | grep -q "packets 0 bytes 0") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0in "packets 0 bytes 0" + lret=1 + fi + + cnt=$(ip netns exec ns0 nft list counter inet filter ns0in6 | grep -q "packets 0 bytes 0") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0in6 "packets 0 bytes 0" + lret=1 + fi + + cnt=$(ip netns exec ns0 nft list counter inet filter ns0out | grep -q "packets 0 bytes 0") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0out "packets 0 bytes 0" + lret=1 + fi + cnt=$(ip netns exec ns0 nft list counter inet filter ns0out6 | grep -q "packets 0 bytes 0") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0out6 "packets 0 bytes 0" + lret=1 + fi + + for dir in "in" "out" ; do + expect="packets 1 bytes 84" + cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 $ns$dir "$expect" + lret=1 + fi + + expect="packets 1 bytes 104" + cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir}6 | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 $ns$dir6 "$expect" + lret=1 + fi + done + + return $lret +} + +reset_counters() +{ + for i in 0 1 2;do + ip netns exec ns$i nft reset counters inet > /dev/null + done +} + +test_local_dnat6() +{ + local lret=0 +ip netns exec ns0 nft -f - <<EOF +table ip6 nat { + chain output { + type nat hook output priority 0; policy accept; + ip6 daddr dead:1::99 dnat to dead:2::99 + } +} +EOF + if [ $? -ne 0 ]; then + echo "SKIP: Could not add add ip6 dnat hook" + return $ksft_skip + fi + + # ping netns1, expect rewrite to netns2 + ip netns exec ns0 ping -q -c 1 dead:1::99 > /dev/null + if [ $? -ne 0 ]; then + lret=1 + echo "ERROR: ping6 failed" + return $lret + fi + + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns1$dir "$expect" + lret=1 + fi + done + + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns2$dir "$expect" + lret=1 + fi + done + + # expect 0 count in ns1 + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + # expect 1 packet in ns2 + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns0$dir "$expect" + lret=1 + fi + done + + test $lret -eq 0 && echo "PASS: ipv6 ping to ns1 was NATted to ns2" + ip netns exec ns0 nft flush chain ip6 nat output + + return $lret +} + +test_local_dnat() +{ + local lret=0 +ip netns exec ns0 nft -f - <<EOF +table ip nat { + chain output { + type nat hook output priority 0; policy accept; + ip daddr 10.0.1.99 dnat to 10.0.2.99 + } +} +EOF + # ping netns1, expect rewrite to netns2 + ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null + if [ $? -ne 0 ]; then + lret=1 + echo "ERROR: ping failed" + return $lret + fi + + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns1$dir "$expect" + lret=1 + fi + done + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns2$dir "$expect" + lret=1 + fi + done + + # expect 0 count in ns1 + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + # expect 1 packet in ns2 + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns0$dir "$expect" + lret=1 + fi + done + + test $lret -eq 0 && echo "PASS: ping to ns1 was NATted to ns2" + + ip netns exec ns0 nft flush chain ip nat output + + reset_counters + ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null + if [ $? -ne 0 ]; then + lret=1 + echo "ERROR: ping failed" + return $lret + fi + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns1$dir "$expect" + lret=1 + fi + done + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns2$dir "$expect" + lret=1 + fi + done + + # expect 1 count in ns1 + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0$dir "$expect" + lret=1 + fi + done + + # expect 0 packet in ns2 + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns2$dir "$expect" + lret=1 + fi + done + + test $lret -eq 0 && echo "PASS: ping to ns1 OK after nat output chain flush" + + return $lret +} + + +test_masquerade6() +{ + local lret=0 + + ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null + + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 via ipv6" + return 1 + lret=1 + fi + + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns2$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + reset_counters + +# add masquerading rule +ip netns exec ns0 nft -f - <<EOF +table ip6 nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + meta oif veth0 masquerade + } +} +EOF + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ipv6 masquerading" + lret=1 + fi + + # ns1 should have seen packets from ns0, due to masquerade + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + # ns1 should not have seen packets from ns2, due to masquerade + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + ip netns exec ns0 nft flush chain ip6 nat postrouting + if [ $? -ne 0 ]; then + echo "ERROR: Could not flush ip6 nat postrouting" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IPv6 masquerade for ns2" + + return $lret +} + +test_masquerade() +{ + local lret=0 + + ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null + ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: canot ping ns1 from ns2" + lret=1 + fi + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns2$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + reset_counters + +# add masquerading rule +ip netns exec ns0 nft -f - <<EOF +table ip nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + meta oif veth0 masquerade + } +} +EOF + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ip masquerading" + lret=1 + fi + + # ns1 should have seen packets from ns0, due to masquerade + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + # ns1 should not have seen packets from ns2, due to masquerade + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + ip netns exec ns0 nft flush chain ip nat postrouting + if [ $? -ne 0 ]; then + echo "ERROR: Could not flush nat postrouting" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IP masquerade for ns2" + + return $lret +} + +test_redirect6() +{ + local lret=0 + + ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null + + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannnot ping ns1 from ns2 via ipv6" + lret=1 + fi + + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns2$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + reset_counters + +# add redirect rule +ip netns exec ns0 nft -f - <<EOF +table ip6 nat { + chain prerouting { + type nat hook prerouting priority 0; policy accept; + meta iif veth1 meta l4proto icmpv6 ip6 saddr dead:2::99 ip6 daddr dead:1::99 redirect + } +} +EOF + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ip6 redirect" + lret=1 + fi + + # ns1 should have seen no packets from ns2, due to redirection + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + # ns0 should have seen packets from ns2, due to masquerade + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + ip netns exec ns0 nft delete table ip6 nat + if [ $? -ne 0 ]; then + echo "ERROR: Could not delete ip6 nat table" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IPv6 redirection for ns2" + + return $lret +} + +test_redirect() +{ + local lret=0 + + ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null + ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2" + lret=1 + fi + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns2$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + reset_counters + +# add redirect rule +ip netns exec ns0 nft -f - <<EOF +table ip nat { + chain prerouting { + type nat hook prerouting priority 0; policy accept; + meta iif veth1 ip protocol icmp ip saddr 10.0.2.99 ip daddr 10.0.1.99 redirect + } +} +EOF + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ip redirect" + lret=1 + fi + + # ns1 should have seen no packets from ns2, due to redirection + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + # ns0 should have seen packets from ns2, due to masquerade + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + ip netns exec ns0 nft delete table ip nat + if [ $? -ne 0 ]; then + echo "ERROR: Could not delete nat table" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IP redirection for ns2" + + return $lret +} + + +# ip netns exec ns0 ping -c 1 -q 10.0.$i.99 +for i in 0 1 2; do +ip netns exec ns$i nft -f - <<EOF +table inet filter { + counter ns0in {} + counter ns1in {} + counter ns2in {} + + counter ns0out {} + counter ns1out {} + counter ns2out {} + + counter ns0in6 {} + counter ns1in6 {} + counter ns2in6 {} + + counter ns0out6 {} + counter ns1out6 {} + counter ns2out6 {} + + map nsincounter { + type ipv4_addr : counter + elements = { 10.0.1.1 : "ns0in", + 10.0.2.1 : "ns0in", + 10.0.1.99 : "ns1in", + 10.0.2.99 : "ns2in" } + } + + map nsincounter6 { + type ipv6_addr : counter + elements = { dead:1::1 : "ns0in6", + dead:2::1 : "ns0in6", + dead:1::99 : "ns1in6", + dead:2::99 : "ns2in6" } + } + + map nsoutcounter { + type ipv4_addr : counter + elements = { 10.0.1.1 : "ns0out", + 10.0.2.1 : "ns0out", + 10.0.1.99: "ns1out", + 10.0.2.99: "ns2out" } + } + + map nsoutcounter6 { + type ipv6_addr : counter + elements = { dead:1::1 : "ns0out6", + dead:2::1 : "ns0out6", + dead:1::99 : "ns1out6", + dead:2::99 : "ns2out6" } + } + + chain input { + type filter hook input priority 0; policy accept; + counter name ip saddr map @nsincounter + icmpv6 type { "echo-request", "echo-reply" } counter name ip6 saddr map @nsincounter6 + } + chain output { + type filter hook output priority 0; policy accept; + counter name ip daddr map @nsoutcounter + icmpv6 type { "echo-request", "echo-reply" } counter name ip6 daddr map @nsoutcounter6 + } +} +EOF +done + +sleep 3 +# test basic connectivity +for i in 1 2; do + ip netns exec ns0 ping -c 1 -q 10.0.$i.99 > /dev/null + if [ $? -ne 0 ];then + echo "ERROR: Could not reach other namespace(s)" 1>&2 + ret=1 + fi + + ip netns exec ns0 ping -c 1 -q dead:$i::99 > /dev/null + if [ $? -ne 0 ];then + echo "ERROR: Could not reach other namespace(s) via ipv6" 1>&2 + ret=1 + fi + check_counters ns$i + if [ $? -ne 0 ]; then + ret=1 + fi + + check_ns0_counters ns$i + if [ $? -ne 0 ]; then + ret=1 + fi + reset_counters +done + +if [ $ret -eq 0 ];then + echo "PASS: netns routing/connectivity: ns0 can reach ns1 and ns2" +fi + +reset_counters +test_local_dnat +test_local_dnat6 + +reset_counters +test_masquerade +test_masquerade6 + +reset_counters +test_redirect +test_redirect6 + +for i in 0 1 2; do ip netns del ns$i;done + +exit $ret -- 2.19.1

5 years, 10 months

1
0
0 0

[PATCH AUTOSEL 4.14 25/36] selftests: netfilter: fix config fragment CONFIG_NF_TABLES_INET

by Sasha Levin

From: Naresh Kamboju <naresh.kamboju(a)linaro.org> [ Upstream commit 952b72f89ae23b316da8c1021b18d0c388ad6cc4 ] In selftests the config fragment for netfilter was added as NF_TABLES_INET=y and this patch correct it as CONFIG_NF_TABLES_INET=y Signed-off-by: Naresh Kamboju <naresh.kamboju(a)linaro.org> Acked-by: Florian Westphal <fw(a)strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/netfilter/config | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/netfilter/config b/tools/testing/selftests/netfilter/config index 1017313e41a85..59caa8f71cd80 100644 --- a/tools/testing/selftests/netfilter/config +++ b/tools/testing/selftests/netfilter/config @@ -1,2 +1,2 @@ CONFIG_NET_NS=y -NF_TABLES_INET=y +CONFIG_NF_TABLES_INET=y -- 2.19.1

5 years, 10 months

1
0
0 0

[PATCH AUTOSEL 4.14 18/36] bpf, selftests: fix handling of sparse CPU allocations

by Sasha Levin

From: Martynas Pumputis <m(a)lambda.lt> [ Upstream commit 1bb54c4071f585ebef56ce8fdfe6026fa2cbcddd ] Previously, bpf_num_possible_cpus() had a bug when calculating a number of possible CPUs in the case of sparse CPU allocations, as it was considering only the first range or element of /sys/devices/system/cpu/possible. E.g. in the case of "0,2-3" (CPU 1 is not available), the function returned 1 instead of 3. This patch fixes the function by making it parse all CPU ranges and elements. Signed-off-by: Martynas Pumputis <m(a)lambda.lt> Acked-by: Yonghong Song <yhs(a)fb.com> Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/bpf/bpf_util.h | 30 +++++++++++++++++--------- 1 file changed, 20 insertions(+), 10 deletions(-) diff --git a/tools/testing/selftests/bpf/bpf_util.h b/tools/testing/selftests/bpf/bpf_util.h index d0811b3d6a6f1..4bf7203649344 100644 --- a/tools/testing/selftests/bpf/bpf_util.h +++ b/tools/testing/selftests/bpf/bpf_util.h @@ -13,7 +13,7 @@ static inline unsigned int bpf_num_possible_cpus(void) unsigned int start, end, possible_cpus = 0; char buff[128]; FILE *fp; - int n; + int len, n, i, j = 0; fp = fopen(fcpu, "r"); if (!fp) { @@ -21,17 +21,27 @@ static inline unsigned int bpf_num_possible_cpus(void) exit(1); } - while (fgets(buff, sizeof(buff), fp)) { - n = sscanf(buff, "%u-%u", &start, &end); - if (n == 0) { - printf("Failed to retrieve # possible CPUs!\n"); - exit(1); - } else if (n == 1) { - end = start; + if (!fgets(buff, sizeof(buff), fp)) { + printf("Failed to read %s!\n", fcpu); + exit(1); + } + + len = strlen(buff); + for (i = 0; i <= len; i++) { + if (buff[i] == ',' || buff[i] == '\0') { + buff[i] = '\0'; + n = sscanf(&buff[j], "%u-%u", &start, &end); + if (n <= 0) { + printf("Failed to retrieve # possible CPUs!\n"); + exit(1); + } else if (n == 1) { + end = start; + } + possible_cpus += end - start + 1; + j = i + 1; } - possible_cpus = start == 0 ? end + 1 : 0; - break; } + fclose(fp); return possible_cpus; -- 2.19.1

5 years, 10 months

1
0
0 0

[PATCH AUTOSEL 4.19 45/64] selftests: netfilter: add simple masq/redirect test cases

by Sasha Levin

From: Florian Westphal <fw(a)strlen.de> [ Upstream commit 98bfc3414bda335dbd7fec58bde6266f991801d7 ] Check basic nat/redirect/masquerade for ipv4 and ipv6. Signed-off-by: Florian Westphal <fw(a)strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/netfilter/Makefile | 2 +- tools/testing/selftests/netfilter/nft_nat.sh | 762 +++++++++++++++++++ 2 files changed, 763 insertions(+), 1 deletion(-) create mode 100755 tools/testing/selftests/netfilter/nft_nat.sh diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile index 47ed6cef93fb8..c9ff2b47bd1ca 100644 --- a/tools/testing/selftests/netfilter/Makefile +++ b/tools/testing/selftests/netfilter/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 # Makefile for netfilter selftests -TEST_PROGS := nft_trans_stress.sh +TEST_PROGS := nft_trans_stress.sh nft_nat.sh include ../lib.mk diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh new file mode 100755 index 0000000000000..8ec76681605cc --- /dev/null +++ b/tools/testing/selftests/netfilter/nft_nat.sh @@ -0,0 +1,762 @@ +#!/bin/bash +# +# This test is for basic NAT functionality: snat, dnat, redirect, masquerade. +# + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 +ret=0 + +nft --version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without nft tool" + exit $ksft_skip +fi + +ip -Version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +ip netns add ns0 +ip netns add ns1 +ip netns add ns2 + +ip link add veth0 netns ns0 type veth peer name eth0 netns ns1 +ip link add veth1 netns ns0 type veth peer name eth0 netns ns2 + +ip -net ns0 link set lo up +ip -net ns0 link set veth0 up +ip -net ns0 addr add 10.0.1.1/24 dev veth0 +ip -net ns0 addr add dead:1::1/64 dev veth0 + +ip -net ns0 link set veth1 up +ip -net ns0 addr add 10.0.2.1/24 dev veth1 +ip -net ns0 addr add dead:2::1/64 dev veth1 + +for i in 1 2; do + ip -net ns$i link set lo up + ip -net ns$i link set eth0 up + ip -net ns$i addr add 10.0.$i.99/24 dev eth0 + ip -net ns$i route add default via 10.0.$i.1 + ip -net ns$i addr add dead:$i::99/64 dev eth0 + ip -net ns$i route add default via dead:$i::1 +done + +bad_counter() +{ + local ns=$1 + local counter=$2 + local expect=$3 + + echo "ERROR: $counter counter in $ns has unexpected value (expected $expect)" 1>&2 + ip netns exec $ns nft list counter inet filter $counter 1>&2 +} + +check_counters() +{ + ns=$1 + local lret=0 + + cnt=$(ip netns exec $ns nft list counter inet filter ns0in | grep -q "packets 1 bytes 84") + if [ $? -ne 0 ]; then + bad_counter $ns ns0in "packets 1 bytes 84" + lret=1 + fi + cnt=$(ip netns exec $ns nft list counter inet filter ns0out | grep -q "packets 1 bytes 84") + if [ $? -ne 0 ]; then + bad_counter $ns ns0out "packets 1 bytes 84" + lret=1 + fi + + expect="packets 1 bytes 104" + cnt=$(ip netns exec $ns nft list counter inet filter ns0in6 | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter $ns ns0in6 "$expect" + lret=1 + fi + cnt=$(ip netns exec $ns nft list counter inet filter ns0out6 | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter $ns ns0out6 "$expect" + lret=1 + fi + + return $lret +} + +check_ns0_counters() +{ + local ns=$1 + local lret=0 + + cnt=$(ip netns exec ns0 nft list counter inet filter ns0in | grep -q "packets 0 bytes 0") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0in "packets 0 bytes 0" + lret=1 + fi + + cnt=$(ip netns exec ns0 nft list counter inet filter ns0in6 | grep -q "packets 0 bytes 0") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0in6 "packets 0 bytes 0" + lret=1 + fi + + cnt=$(ip netns exec ns0 nft list counter inet filter ns0out | grep -q "packets 0 bytes 0") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0out "packets 0 bytes 0" + lret=1 + fi + cnt=$(ip netns exec ns0 nft list counter inet filter ns0out6 | grep -q "packets 0 bytes 0") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0out6 "packets 0 bytes 0" + lret=1 + fi + + for dir in "in" "out" ; do + expect="packets 1 bytes 84" + cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 $ns$dir "$expect" + lret=1 + fi + + expect="packets 1 bytes 104" + cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir}6 | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 $ns$dir6 "$expect" + lret=1 + fi + done + + return $lret +} + +reset_counters() +{ + for i in 0 1 2;do + ip netns exec ns$i nft reset counters inet > /dev/null + done +} + +test_local_dnat6() +{ + local lret=0 +ip netns exec ns0 nft -f - <<EOF +table ip6 nat { + chain output { + type nat hook output priority 0; policy accept; + ip6 daddr dead:1::99 dnat to dead:2::99 + } +} +EOF + if [ $? -ne 0 ]; then + echo "SKIP: Could not add add ip6 dnat hook" + return $ksft_skip + fi + + # ping netns1, expect rewrite to netns2 + ip netns exec ns0 ping -q -c 1 dead:1::99 > /dev/null + if [ $? -ne 0 ]; then + lret=1 + echo "ERROR: ping6 failed" + return $lret + fi + + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns1$dir "$expect" + lret=1 + fi + done + + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns2$dir "$expect" + lret=1 + fi + done + + # expect 0 count in ns1 + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + # expect 1 packet in ns2 + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns0$dir "$expect" + lret=1 + fi + done + + test $lret -eq 0 && echo "PASS: ipv6 ping to ns1 was NATted to ns2" + ip netns exec ns0 nft flush chain ip6 nat output + + return $lret +} + +test_local_dnat() +{ + local lret=0 +ip netns exec ns0 nft -f - <<EOF +table ip nat { + chain output { + type nat hook output priority 0; policy accept; + ip daddr 10.0.1.99 dnat to 10.0.2.99 + } +} +EOF + # ping netns1, expect rewrite to netns2 + ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null + if [ $? -ne 0 ]; then + lret=1 + echo "ERROR: ping failed" + return $lret + fi + + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns1$dir "$expect" + lret=1 + fi + done + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns2$dir "$expect" + lret=1 + fi + done + + # expect 0 count in ns1 + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + # expect 1 packet in ns2 + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns0$dir "$expect" + lret=1 + fi + done + + test $lret -eq 0 && echo "PASS: ping to ns1 was NATted to ns2" + + ip netns exec ns0 nft flush chain ip nat output + + reset_counters + ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null + if [ $? -ne 0 ]; then + lret=1 + echo "ERROR: ping failed" + return $lret + fi + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns1$dir "$expect" + lret=1 + fi + done + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns2$dir "$expect" + lret=1 + fi + done + + # expect 1 count in ns1 + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns0 ns0$dir "$expect" + lret=1 + fi + done + + # expect 0 packet in ns2 + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns2$dir "$expect" + lret=1 + fi + done + + test $lret -eq 0 && echo "PASS: ping to ns1 OK after nat output chain flush" + + return $lret +} + + +test_masquerade6() +{ + local lret=0 + + ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null + + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 via ipv6" + return 1 + lret=1 + fi + + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns2$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + reset_counters + +# add masquerading rule +ip netns exec ns0 nft -f - <<EOF +table ip6 nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + meta oif veth0 masquerade + } +} +EOF + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ipv6 masquerading" + lret=1 + fi + + # ns1 should have seen packets from ns0, due to masquerade + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + # ns1 should not have seen packets from ns2, due to masquerade + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + ip netns exec ns0 nft flush chain ip6 nat postrouting + if [ $? -ne 0 ]; then + echo "ERROR: Could not flush ip6 nat postrouting" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IPv6 masquerade for ns2" + + return $lret +} + +test_masquerade() +{ + local lret=0 + + ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null + ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: canot ping ns1 from ns2" + lret=1 + fi + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns2$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + reset_counters + +# add masquerading rule +ip netns exec ns0 nft -f - <<EOF +table ip nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + meta oif veth0 masquerade + } +} +EOF + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ip masquerading" + lret=1 + fi + + # ns1 should have seen packets from ns0, due to masquerade + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + # ns1 should not have seen packets from ns2, due to masquerade + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + ip netns exec ns0 nft flush chain ip nat postrouting + if [ $? -ne 0 ]; then + echo "ERROR: Could not flush nat postrouting" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IP masquerade for ns2" + + return $lret +} + +test_redirect6() +{ + local lret=0 + + ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null + + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannnot ping ns1 from ns2 via ipv6" + lret=1 + fi + + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns2$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + reset_counters + +# add redirect rule +ip netns exec ns0 nft -f - <<EOF +table ip6 nat { + chain prerouting { + type nat hook prerouting priority 0; policy accept; + meta iif veth1 meta l4proto icmpv6 ip6 saddr dead:2::99 ip6 daddr dead:1::99 redirect + } +} +EOF + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ip6 redirect" + lret=1 + fi + + # ns1 should have seen no packets from ns2, due to redirection + expect="packets 0 bytes 0" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + # ns0 should have seen packets from ns2, due to masquerade + expect="packets 1 bytes 104" + for dir in "in6" "out6" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + ip netns exec ns0 nft delete table ip6 nat + if [ $? -ne 0 ]; then + echo "ERROR: Could not delete ip6 nat table" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IPv6 redirection for ns2" + + return $lret +} + +test_redirect() +{ + local lret=0 + + ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null + ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2" + lret=1 + fi + + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns2$dir "$expect" + lret=1 + fi + + cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns2 ns1$dir "$expect" + lret=1 + fi + done + + reset_counters + +# add redirect rule +ip netns exec ns0 nft -f - <<EOF +table ip nat { + chain prerouting { + type nat hook prerouting priority 0; policy accept; + meta iif veth1 ip protocol icmp ip saddr 10.0.2.99 ip daddr 10.0.1.99 redirect + } +} +EOF + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ip redirect" + lret=1 + fi + + # ns1 should have seen no packets from ns2, due to redirection + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + + cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + # ns0 should have seen packets from ns2, due to masquerade + expect="packets 1 bytes 84" + for dir in "in" "out" ; do + cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter ns1 ns0$dir "$expect" + lret=1 + fi + done + + ip netns exec ns0 nft delete table ip nat + if [ $? -ne 0 ]; then + echo "ERROR: Could not delete nat table" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IP redirection for ns2" + + return $lret +} + + +# ip netns exec ns0 ping -c 1 -q 10.0.$i.99 +for i in 0 1 2; do +ip netns exec ns$i nft -f - <<EOF +table inet filter { + counter ns0in {} + counter ns1in {} + counter ns2in {} + + counter ns0out {} + counter ns1out {} + counter ns2out {} + + counter ns0in6 {} + counter ns1in6 {} + counter ns2in6 {} + + counter ns0out6 {} + counter ns1out6 {} + counter ns2out6 {} + + map nsincounter { + type ipv4_addr : counter + elements = { 10.0.1.1 : "ns0in", + 10.0.2.1 : "ns0in", + 10.0.1.99 : "ns1in", + 10.0.2.99 : "ns2in" } + } + + map nsincounter6 { + type ipv6_addr : counter + elements = { dead:1::1 : "ns0in6", + dead:2::1 : "ns0in6", + dead:1::99 : "ns1in6", + dead:2::99 : "ns2in6" } + } + + map nsoutcounter { + type ipv4_addr : counter + elements = { 10.0.1.1 : "ns0out", + 10.0.2.1 : "ns0out", + 10.0.1.99: "ns1out", + 10.0.2.99: "ns2out" } + } + + map nsoutcounter6 { + type ipv6_addr : counter + elements = { dead:1::1 : "ns0out6", + dead:2::1 : "ns0out6", + dead:1::99 : "ns1out6", + dead:2::99 : "ns2out6" } + } + + chain input { + type filter hook input priority 0; policy accept; + counter name ip saddr map @nsincounter + icmpv6 type { "echo-request", "echo-reply" } counter name ip6 saddr map @nsincounter6 + } + chain output { + type filter hook output priority 0; policy accept; + counter name ip daddr map @nsoutcounter + icmpv6 type { "echo-request", "echo-reply" } counter name ip6 daddr map @nsoutcounter6 + } +} +EOF +done + +sleep 3 +# test basic connectivity +for i in 1 2; do + ip netns exec ns0 ping -c 1 -q 10.0.$i.99 > /dev/null + if [ $? -ne 0 ];then + echo "ERROR: Could not reach other namespace(s)" 1>&2 + ret=1 + fi + + ip netns exec ns0 ping -c 1 -q dead:$i::99 > /dev/null + if [ $? -ne 0 ];then + echo "ERROR: Could not reach other namespace(s) via ipv6" 1>&2 + ret=1 + fi + check_counters ns$i + if [ $? -ne 0 ]; then + ret=1 + fi + + check_ns0_counters ns$i + if [ $? -ne 0 ]; then + ret=1 + fi + reset_counters +done + +if [ $ret -eq 0 ];then + echo "PASS: netns routing/connectivity: ns0 can reach ns1 and ns2" +fi + +reset_counters +test_local_dnat +test_local_dnat6 + +reset_counters +test_masquerade +test_masquerade6 + +reset_counters +test_redirect +test_redirect6 + +for i in 0 1 2; do ip netns del ns$i;done + +exit $ret -- 2.19.1

5 years, 10 months

1
0
0 0

[PATCH AUTOSEL 4.19 44/64] selftests: netfilter: fix config fragment CONFIG_NF_TABLES_INET

by Sasha Levin

From: Naresh Kamboju <naresh.kamboju(a)linaro.org> [ Upstream commit 952b72f89ae23b316da8c1021b18d0c388ad6cc4 ] In selftests the config fragment for netfilter was added as NF_TABLES_INET=y and this patch correct it as CONFIG_NF_TABLES_INET=y Signed-off-by: Naresh Kamboju <naresh.kamboju(a)linaro.org> Acked-by: Florian Westphal <fw(a)strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/netfilter/config | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/netfilter/config b/tools/testing/selftests/netfilter/config index 1017313e41a85..59caa8f71cd80 100644 --- a/tools/testing/selftests/netfilter/config +++ b/tools/testing/selftests/netfilter/config @@ -1,2 +1,2 @@ CONFIG_NET_NS=y -NF_TABLES_INET=y +CONFIG_NF_TABLES_INET=y -- 2.19.1

5 years, 10 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror