- Linux-kselftest-mirror - lists.linaro.org

[PATCH v2] doc: kselftest: Fix KBUILD_OUTPUT usage instructions

by Shuah Khan

Fix KBUILD_OUTPUT usage instructions. The current documentation is incorrect. Update and fix outdated information about summary option. Add a reference to kselftest wiki for additional information on the framework and tips on writing new tests. Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> --- Changes since v1: -- Fixed the confusing language about output directory -- Updated outdated instructions on summary option. -- Regenerated patch with current email address. Documentation/dev-tools/kselftest.rst | 42 ++++++++++++++++++--------- 1 file changed, 29 insertions(+), 13 deletions(-) diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst index c8c03388b9de..25604904fa6e 100644 --- a/Documentation/dev-tools/kselftest.rst +++ b/Documentation/dev-tools/kselftest.rst @@ -7,6 +7,11 @@ directory. These are intended to be small tests to exercise individual code paths in the kernel. Tests are intended to be run after building, installing and booting a kernel. +You can find additional information on Kselftest framework, how to +write new tests using the framework on Kselftest wiki: + +https://kselftest.wiki.kernel.org/ + On some systems, hot-plug tests could hang forever waiting for cpu and memory to be ready to be offlined. A special hot-plug target is created to run the full range of hot-plug tests. In default mode, hot-plug tests run @@ -35,17 +40,32 @@ To build and run the tests with a single command, use:: Note that some tests will require root privileges. -Build and run from user specific object directory (make O=dir):: +Kselftest supports saving output files in a separate directory and then +running tests. To locate output files in a separate directory two syntaxes +are supported. In both cases the working directory must be the root of the +kernel src. This is applicable to "Running a subset of selftests" section +below. + +To build, save output files in a separate directory with O= :: $ make O=/tmp/kselftest kselftest -Build and run KBUILD_OUTPUT directory (make KBUILD_OUTPUT=):: +To build, save output files in a separate directory with KBUILD_OUTPUT :: + + $ export KBUILD_OUTPUT=/tmp/kselftest; make kselftest - $ make KBUILD_OUTPUT=/tmp/kselftest kselftest +The O= assignment takes precedence over the KBUILD_OUTPUT environment +variable. -The above commands run the tests and print pass/fail summary to make it -easier to understand the test results. Please find the detailed individual -test results for each test in /tmp/testname file(s). +The above commands by default run the tests and print full pass/fail report. +Kselftest supports "summary" option to make it easier to understand the test +results. Please find the detailed individual test results for each test in +/tmp/testname file(s) when summary option is specified. This is applicable +to "Running a subset of selftests" section below. + +To run kselftest with summary option enabled :: + + $ make summary=1 kselftest Running a subset of selftests ============================= @@ -61,17 +81,13 @@ You can specify multiple tests to build and run:: $ make TARGETS="size timers" kselftest -Build and run from user specific object directory (make O=dir):: +To build, save output files in a separate directory with O= :: $ make O=/tmp/kselftest TARGETS="size timers" kselftest -Build and run KBUILD_OUTPUT directory (make KBUILD_OUTPUT=):: - - $ make KBUILD_OUTPUT=/tmp/kselftest TARGETS="size timers" kselftest +To build, save output files in a separate directory with KBUILD_OUTPUT :: -The above commands run the tests and print pass/fail summary to make it -easier to understand the test results. Please find the detailed individual -test results for each test in /tmp/testname file(s). + $ export KBUILD_OUTPUT=/tmp/kselftest; make TARGETS="size timers" kselftest See the top-level tools/testing/selftests/Makefile for the list of all possible targets. -- 2.17.1

5 years, 8 months

2
1
0 0

[PATCH] rseq/selftests: x86: Work-around bogus gcc-8 optimisation

by Mathieu Desnoyers

At least the following versions of gcc-8: - gcc version 8.0.1 20180414 (experimental) [trunk revision 259383] (Ubuntu 8-20180414-1ubuntu2) - gcc 8.2.0-7ubuntu1 (Ubuntu 18.10 (Cosmic)), generate broken assembler with asm goto that have a thread-local storage "m" input operand on both x86-32 and x86-64. For instance: __thread int var; static int fct(void) { asm goto ( "jmp %l[testlabel]\n\t" : : [var] "m" (var) : : testlabel); return 0; testlabel: return 1; } int main() { return fct(); } % gcc-8 -O2 -o test-asm-goto test-asm-goto.c /tmp/ccAdHJbe.o: In function `main': test-asm-goto.c:(.text.startup+0x1): undefined reference to `.L2' collect2: error: ld returned 1 exit status % gcc-8 -m32 -O2 -o test-asm-goto test-asm-goto.c /tmp/ccREsVXA.o: In function `main': test-asm-goto.c:(.text.startup+0x1): undefined reference to `.L2' collect2: error: ld returned 1 exit status Work-around this compiler bug in the rseq-x86.h header by passing the address of the __rseq_abi TLS as a register operand rather than using the "m" input operand. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> CC: Ingo Molnar <mingo(a)redhat.com> CC: Peter Zijlstra <peterz(a)infradead.org> CC: Thomas Gleixner <tglx(a)linutronix.de> CC: Joel Fernandes <joelaf(a)google.com> CC: Catalin Marinas <catalin.marinas(a)arm.com> CC: Dave Watson <davejwatson(a)fb.com> CC: Will Deacon <will.deacon(a)arm.com> CC: Shuah Khan <shuah(a)kernel.org> CC: Andi Kleen <andi(a)firstfloor.org> CC: linux-kselftest(a)vger.kernel.org CC: "H . Peter Anvin" <hpa(a)zytor.com> CC: Chris Lameter <cl(a)linux.com> CC: Russell King <linux(a)arm.linux.org.uk> CC: Michael Kerrisk <mtk.manpages(a)gmail.com> CC: "Paul E . McKenney" <paulmck(a)linux.vnet.ibm.com> CC: Paul Turner <pjt(a)google.com> CC: Boqun Feng <boqun.feng(a)gmail.com> CC: Josh Triplett <josh(a)joshtriplett.org> CC: Steven Rostedt <rostedt(a)goodmis.org> CC: Ben Maurer <bmaurer(a)fb.com> CC: linux-api(a)vger.kernel.org CC: Andy Lutomirski <luto(a)amacapital.net> CC: Andrew Morton <akpm(a)linux-foundation.org> CC: Linus Torvalds <torvalds(a)linux-foundation.org> --- tools/testing/selftests/rseq/rseq-x86.h | 144 ++++++++++++------------ 1 file changed, 70 insertions(+), 74 deletions(-) diff --git a/tools/testing/selftests/rseq/rseq-x86.h b/tools/testing/selftests/rseq/rseq-x86.h index 1780faf30f28..b2da6004fe30 100644 --- a/tools/testing/selftests/rseq/rseq-x86.h +++ b/tools/testing/selftests/rseq/rseq-x86.h @@ -16,6 +16,16 @@ */ #define RSEQ_SIG 0x53053053 +/* + * Due to a compiler optimization bug in gcc-8 with asm goto and TLS asm input + * operands, we cannot use "m" input operands, and rather pass the __rseq_abi + * address through a "r" input operand. + */ + +/* Offset of cpu_id and rseq_cs fields in struct rseq. */ +#define RSEQ_CPU_ID_OFFSET 4 +#define RSEQ_CS_OFFSET 8 + #ifdef __x86_64__ #define rseq_smp_mb() \ @@ -75,12 +85,12 @@ do { \ #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \ RSEQ_INJECT_ASM(1) \ "leaq " __rseq_str(cs_label) "(%%rip), %%rax\n\t" \ - "movq %%rax, %[" __rseq_str(rseq_cs) "]\n\t" \ + "movq %%rax, " __rseq_str(rseq_cs) "\n\t" \ __rseq_str(label) ":\n\t" #define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label) \ RSEQ_INJECT_ASM(2) \ - "cmpl %[" __rseq_str(cpu_id) "], %[" __rseq_str(current_cpu_id) "]\n\t" \ + "cmpl %[" __rseq_str(cpu_id) "], " __rseq_str(current_cpu_id) "\n\t" \ "jnz " __rseq_str(label) "\n\t" #define RSEQ_ASM_DEFINE_ABORT(label, teardown, abort_label) \ @@ -113,14 +123,14 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) #endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "cmpq %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "cmpq %[v], %[expect]\n\t" "jnz %l[error2]\n\t" #endif @@ -131,8 +141,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), [v] "m" (*v), [expect] "r" (expect), [newv] "r" (newv) @@ -175,15 +184,15 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) #endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "movq %[v], %%rbx\n\t" "cmpq %%rbx, %[expectnot]\n\t" "je %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "movq %[v], %%rbx\n\t" "cmpq %%rbx, %[expectnot]\n\t" "je %l[error2]\n\t" @@ -198,8 +207,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* final store input */ [v] "m" (*v), [expectnot] "r" (expectnot), @@ -237,11 +245,11 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) #endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) #endif /* final store */ "addq %[count], %[v]\n\t" @@ -250,8 +258,7 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* final store input */ [v] "m" (*v), [count] "er" (count) @@ -287,14 +294,14 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) #endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "cmpq %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "cmpq %[v], %[expect]\n\t" "jnz %l[error2]\n\t" #endif @@ -308,8 +315,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2), @@ -363,8 +369,8 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3]) #endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "cmpq %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t" @@ -373,7 +379,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(5) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "cmpq %[v], %[expect]\n\t" "jnz %l[error2]\n\t" "cmpq %[v2], %[expect2]\n\t" @@ -386,8 +392,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* cmp2 input */ [v2] "m" (*v2), [expect2] "r" (expect2), @@ -438,14 +443,14 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, "movq %[dst], %[rseq_scratch1]\n\t" "movq %[len], %[rseq_scratch2]\n\t" /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "cmpq %[v], %[expect]\n\t" "jnz 5f\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 6f) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 6f) "cmpq %[v], %[expect]\n\t" "jnz 7f\n\t" #endif @@ -493,8 +498,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, #endif : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* final store input */ [v] "m" (*v), [expect] "r" (expect), @@ -602,12 +606,12 @@ do { \ #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \ RSEQ_INJECT_ASM(1) \ - "movl $" __rseq_str(cs_label) ", %[rseq_cs]\n\t" \ + "movl $" __rseq_str(cs_label) ", " __rseq_str(rseq_cs) "\n\t" \ __rseq_str(label) ":\n\t" #define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label) \ RSEQ_INJECT_ASM(2) \ - "cmpl %[" __rseq_str(cpu_id) "], %[" __rseq_str(current_cpu_id) "]\n\t" \ + "cmpl %[" __rseq_str(cpu_id) "], " __rseq_str(current_cpu_id) "\n\t" \ "jnz " __rseq_str(label) "\n\t" #define RSEQ_ASM_DEFINE_ABORT(label, teardown, abort_label) \ @@ -640,14 +644,14 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) #endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "cmpl %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "cmpl %[v], %[expect]\n\t" "jnz %l[error2]\n\t" #endif @@ -658,8 +662,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), [v] "m" (*v), [expect] "r" (expect), [newv] "r" (newv) @@ -702,15 +705,15 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) #endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "movl %[v], %%ebx\n\t" "cmpl %%ebx, %[expectnot]\n\t" "je %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "movl %[v], %%ebx\n\t" "cmpl %%ebx, %[expectnot]\n\t" "je %l[error2]\n\t" @@ -725,8 +728,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* final store input */ [v] "m" (*v), [expectnot] "r" (expectnot), @@ -764,11 +766,11 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) #endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) #endif /* final store */ "addl %[count], %[v]\n\t" @@ -777,8 +779,7 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* final store input */ [v] "m" (*v), [count] "ir" (count) @@ -814,14 +815,14 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) #endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "cmpl %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "cmpl %[v], %[expect]\n\t" "jnz %l[error2]\n\t" #endif @@ -836,8 +837,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* try store input */ [v2] "m" (*v2), [newv2] "m" (newv2), @@ -881,15 +881,15 @@ int rseq_cmpeqv_trystorev_storev_release(intptr_t *v, intptr_t expect, RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) #endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "movl %[expect], %%eax\n\t" "cmpl %[v], %%eax\n\t" "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "movl %[expect], %%eax\n\t" "cmpl %[v], %%eax\n\t" "jnz %l[error2]\n\t" @@ -905,8 +905,7 @@ int rseq_cmpeqv_trystorev_storev_release(intptr_t *v, intptr_t expect, RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2), @@ -952,8 +951,8 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3]) #endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "cmpl %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t" @@ -962,7 +961,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(5) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "cmpl %[v], %[expect]\n\t" "jnz %l[error2]\n\t" "cmpl %[expect2], %[v2]\n\t" @@ -976,8 +975,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* cmp2 input */ [v2] "m" (*v2), [expect2] "r" (expect2), @@ -1029,15 +1027,15 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, "movl %[dst], %[rseq_scratch1]\n\t" "movl %[len], %[rseq_scratch2]\n\t" /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "movl %[expect], %%eax\n\t" "cmpl %%eax, %[v]\n\t" "jnz 5f\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 6f) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 6f) "movl %[expect], %%eax\n\t" "cmpl %%eax, %[v]\n\t" "jnz 7f\n\t" @@ -1087,8 +1085,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, #endif : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* final store input */ [v] "m" (*v), [expect] "m" (expect), @@ -1142,15 +1139,15 @@ int rseq_cmpeqv_trymemcpy_storev_release(intptr_t *v, intptr_t expect, "movl %[dst], %[rseq_scratch1]\n\t" "movl %[len], %[rseq_scratch2]\n\t" /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "movl %[expect], %%eax\n\t" "cmpl %%eax, %[v]\n\t" "jnz 5f\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 6f) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 6f) "movl %[expect], %%eax\n\t" "cmpl %%eax, %[v]\n\t" "jnz 7f\n\t" @@ -1201,8 +1198,7 @@ int rseq_cmpeqv_trymemcpy_storev_release(intptr_t *v, intptr_t expect, #endif : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* final store input */ [v] "m" (*v), [expect] "m" (expect), -- 2.17.1

5 years, 8 months

1
0
0 0

[PATCHv3] selftests/efivarfs: clean up test files from test_create*()

by Po-Hsu Lin

Test files created by test_create() and test_create_empty() tests will stay in the $efivarfs_mount directory until the system was rebooted. When the tester tries to run this efivarfs test again on the same system, the immutable characteristics in that directory will cause some "Operation not permitted" noises, and a false-positve test result as the file was created in previous run. -------------------- running test_create -------------------- ./efivarfs.sh: line 59: /sys/firmware/efi/efivars/test_create-210be57c-9849-4fc7-a635-e6382d1aec27: Operation not permitted [PASS] -------------------- running test_create_empty -------------------- ./efivarfs.sh: line 78: /sys/firmware/efi/efivars/test_create_empty-210be57c-9849-4fc7-a635-e6382d1aec27: Operation not permitted [PASS] -------------------- Create a file_cleanup() to remove those test files in the end of each test to solve this issue. For the test_create_read, we can move the clean up task to the end of the test to ensure the system is clean. Also, use this function to replace the existing file removal code. Signed-off-by: Po-Hsu Lin <po-hsu.lin(a)canonical.com> --- tools/testing/selftests/efivarfs/efivarfs.sh | 32 +++++++++++----------------- 1 file changed, 13 insertions(+), 19 deletions(-) diff --git a/tools/testing/selftests/efivarfs/efivarfs.sh b/tools/testing/selftests/efivarfs/efivarfs.sh index d386610..a90f394 100755 --- a/tools/testing/selftests/efivarfs/efivarfs.sh +++ b/tools/testing/selftests/efivarfs/efivarfs.sh @@ -7,6 +7,12 @@ test_guid=210be57c-9849-4fc7-a635-e6382d1aec27 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 +file_cleanup() +{ + chattr -i $1 + rm -f $1 +} + check_prereqs() { local msg="skip all tests:" @@ -58,8 +64,10 @@ test_create() if [ $(stat -c %s $file) -ne 5 ]; then echo "$file has invalid size" >&2 + file_cleanup $file exit 1 fi + file_cleanup $file } test_create_empty() @@ -72,16 +80,14 @@ test_create_empty() echo "$file can not be created without writing" >&2 exit 1 fi + file_cleanup $file } test_create_read() { local file=$efivarfs_mount/$FUNCNAME-$test_guid - if [ -f $file]; then - chattr -i $file - rm -rf $file - fi ./create-read $file + file_cleanup $file } test_delete() @@ -96,11 +102,7 @@ test_delete() exit 1 fi - rm $file 2>/dev/null - if [ $? -ne 0 ]; then - chattr -i $file - rm $file - fi + file_cleanup $file if [ -e $file ]; then echo "$file couldn't be deleted" >&2 @@ -154,11 +156,7 @@ test_valid_filenames() echo "$file could not be created" >&2 ret=1 else - rm $file 2>/dev/null - if [ $? -ne 0 ]; then - chattr -i $file - rm $file - fi + file_cleanup $file fi done @@ -191,11 +189,7 @@ test_invalid_filenames() if [ -e $file ]; then echo "Creating $file should have failed" >&2 - rm $file 2>/dev/null - if [ $? -ne 0 ]; then - chattr -i $file - rm $file - fi + file_cleanup $file ret=1 fi done -- 2.7.4

5 years, 8 months

1
0
0 0

[PATCHv2] selftests/efivarfs: clean up test files from test_create*()

by Po-Hsu Lin

Test files created by test_create*() tests will stay in the $efivarfs_mount directory unless the system was rebooted. When the tester tries to run this efivarfs test again on the same system, the immutable characteristics in that directory will cause some "Operation not permitted" noises and a false-positve test result to the test_create_read() test. -------------------- running test_create -------------------- ./efivarfs.sh: line 59: /sys/firmware/efi/efivars/test_create-210be57c-9849-4fc7-a635-e6382d1aec27: Operation not permitted [PASS] -------------------- running test_create_empty -------------------- ./efivarfs.sh: line 78: /sys/firmware/efi/efivars/test_create_empty-210be57c-9849-4fc7-a635-e6382d1aec27: Operation not permitted [PASS] -------------------- running test_create_read -------------------- open(O_WRONLY): Operation not permitted [FAIL] -------------------- Create a file_cleanup() to remove those test files in the end of each test to solve this issue. Also, use this function to replace the existing file removal code. Link: https://bugs.launchpad.net/bugs/1809704 Signed-off-by: Po-Hsu Lin <po-hsu.lin(a)canonical.com> --- tools/testing/selftests/efivarfs/efivarfs.sh | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) mode change 100755 => 100644 tools/testing/selftests/efivarfs/efivarfs.sh diff --git a/tools/testing/selftests/efivarfs/efivarfs.sh b/tools/testing/selftests/efivarfs/efivarfs.sh old mode 100755 new mode 100644 index a47029a..14fa6fe --- a/tools/testing/selftests/efivarfs/efivarfs.sh +++ b/tools/testing/selftests/efivarfs/efivarfs.sh @@ -7,6 +7,12 @@ test_guid=210be57c-9849-4fc7-a635-e6382d1aec27 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 +file_cleanup() +{ + chattr -i $1 + rm $1 +} + check_prereqs() { local msg="skip all tests:" @@ -58,8 +64,10 @@ test_create() if [ $(stat -c %s $file) -ne 5 ]; then echo "$file has invalid size" >&2 + file_cleanup $file exit 1 fi + file_cleanup $file } test_create_empty() @@ -72,12 +80,14 @@ test_create_empty() echo "$file can not be created without writing" >&2 exit 1 fi + file_cleanup $file } test_create_read() { local file=$efivarfs_mount/$FUNCNAME-$test_guid ./create-read $file + file_cleanup $file } test_delete() @@ -94,8 +104,7 @@ test_delete() rm $file 2>/dev/null if [ $? -ne 0 ]; then - chattr -i $file - rm $file + file_cleanup $file fi if [ -e $file ]; then @@ -152,8 +161,7 @@ test_valid_filenames() else rm $file 2>/dev/null if [ $? -ne 0 ]; then - chattr -i $file - rm $file + file_cleanup $file fi fi done @@ -189,8 +197,7 @@ test_invalid_filenames() echo "Creating $file should have failed" >&2 rm $file 2>/dev/null if [ $? -ne 0 ]; then - chattr -i $file - rm $file + file_cleanup $file fi ret=1 fi -- 2.7.4

5 years, 8 months

2
3
0 0

next-20190418 kselftest results

by ci_notify＠linaro.org

Summary ------------------------------------------------------------------------ kernel: 5.1.0-rc5 git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git git branch: master git commit: 3f018f4a019a1110527910bac52161e57107957c git describe: next-20190418 Test details: https://qa-reports.linaro.org/lkft/linux-next-oe/build/next-20190418 Regressions (compared to build next-20190417) ------------------------------------------------------------------------ No regressions Fixes (compared to build next-20190417) ------------------------------------------------------------------------ No fixes In total: ------------------------------------------------------------------------ Ran 1240 total tests in the following environments and test suites. pass 756 fail 313 xfail 0 skip 171 Environments -------------- - dragonboard-410c - arm64 - hi6220-hikey - arm64 - i386 - juno-r2 - arm64 - qemu_arm - qemu_arm64 - qemu_i386 - qemu_x86_64 - x15 - arm - x86_64 Test Suites ----------- * kselftest * boot-lkft-kselftests-master-505 * boot-lkft-kselftests-vsyscall-mode-native-master-505 * boot-lkft-kselftests-vsyscall-mode-none-master-505 * kselftest-vsyscall-mode-native * kselftest-vsyscall-mode-none Failures ------------------------------------------------------------------------ qemu_x86_64: * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/livepatch_test-callbacks.sh * kselftest/livepatch_test-livepatch.sh * kselftest/net_fib-onlink-tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_xfrm_policy.sh * kselftest/pstore_pstore_tests * kselftest/rtc_rtctest * kselftest/timestamping_txtimestamp.sh qemu_arm64: * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_verifier * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/livepatch_test-callbacks.sh * kselftest/livepatch_test-livepatch.sh * kselftest/livepatch_test-shadow-vars.sh * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/pstore_pstore_tests * kselftest/rtc_rtctest * kselftest/timestamping_txtimestamp.sh x15: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_sockmap * kselftest/bpf_test_sysctl * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_verifier * kselftest/cgroup_test_core * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/livepatch_test-callbacks.sh * kselftest/livepatch_test-livepatch.sh * kselftest/livepatch_test-shadow-vars.sh * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_msg_zerocopy.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_reuseport_bpf_numa * kselftest/net_test_vxlan_under_vrf.sh * kselftest/proc_proc-self-map-files-002 * kselftest/proc_proc-self-syscall * kselftest/pstore_pstore_tests * kselftest/rtc_rtctest * kselftest/seccomp_seccomp_bpf * kselftest/timestamping_txtimestamp.sh dragonboard-410c: qemu_arm: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_sockmap * kselftest/bpf_test_sysctl * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_verifier * kselftest/cgroup_test_core * kselftest/cpufreq_main.sh * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/livepatch_test-callbacks.sh * kselftest/livepatch_test-livepatch.sh * kselftest/livepatch_test-shadow-vars.sh * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_msg_zerocopy.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_reuseport_bpf_numa * kselftest/net_test_vxlan_under_vrf.sh * kselftest/proc_proc-self-map-files-002 * kselftest/proc_proc-self-syscall * kselftest/pstore_pstore_tests * kselftest/rtc_rtctest * kselftest/seccomp_seccomp_bpf * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests juno-r2: hi6220-hikey: * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_progs * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_verifier * kselftest/cgroup_test_core * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/livepatch_test-callbacks.sh * kselftest/livepatch_test-livepatch.sh * kselftest/livepatch_test-shadow-vars.sh * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/timestamping_txtimestamp.sh i386: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_sockmap * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/firmware_fw_run_tests.sh x86: * kselftest-vsyscall-mode-native/bpf_test_flow_dissector.sh * kselftest-vsyscall-mode-native/bpf_test_lirc_mode2_user * kselftest-vsyscall-mode-native/bpf_test_lwt_ip_encap.sh * kselftest-vsyscall-mode-native/bpf_test_lwt_seg6local.sh * kselftest-vsyscall-mode-native/bpf_test_netcnt * kselftest-vsyscall-mode-native/bpf_test_progs * kselftest-vsyscall-mode-native/bpf_test_sock_addr.sh * kselftest-vsyscall-mode-native/bpf_test_sockmap * kselftest-vsyscall-mode-native/bpf_test_tc_edt.sh * kselftest-vsyscall-mode-native/bpf_test_tc_tunnel.sh * kselftest-vsyscall-mode-native/cgroup_test_core * kselftest-vsyscall-mode-native/dma-buf_udmabuf * kselftest-vsyscall-mode-native/firmware_fw_run_tests.sh * kselftest-vsyscall-mode-native/lib_bitmap.sh * kselftest-vsyscall-mode-native/lib_prime_numbers.sh * kselftest-vsyscall-mode-native/lib_printf.sh * kselftest-vsyscall-mode-native/lib_strscpy.sh * kselftest-vsyscall-mode-native/livepatch_test-callbacks.sh * kselftest-vsyscall-mode-native/livepatch_test-livepatch.sh * kselftest-vsyscall-mode-native/livepatch_test-shadow-vars.sh * kselftest-vsyscall-mode-native/net_fib-onlink-tests.sh * kselftest-vsyscall-mode-native/net_ip_defrag.sh * kselftest-vsyscall-mode-native/net_pmtu.sh * kselftest-vsyscall-mode-native/net_psock_snd.sh * kselftest-vsyscall-mode-native/net_test_vxlan_under_vrf.sh * kselftest-vsyscall-mode-native/net_xfrm_policy.sh * kselftest-vsyscall-mode-native/timestamping_txtimestamp.sh * kselftest-vsyscall-mode-none/bpf_test_flow_dissector.sh * kselftest-vsyscall-mode-none/bpf_test_lirc_mode2_user * kselftest-vsyscall-mode-none/bpf_test_lwt_ip_encap.sh * kselftest-vsyscall-mode-none/bpf_test_lwt_seg6local.sh * kselftest-vsyscall-mode-none/bpf_test_netcnt * kselftest-vsyscall-mode-none/bpf_test_progs * kselftest-vsyscall-mode-none/bpf_test_sock_addr.sh * kselftest-vsyscall-mode-none/bpf_test_sockmap * kselftest-vsyscall-mode-none/bpf_test_tc_edt.sh * kselftest-vsyscall-mode-none/bpf_test_tc_tunnel.sh * kselftest-vsyscall-mode-none/cgroup_test_core * kselftest-vsyscall-mode-none/dma-buf_udmabuf * kselftest-vsyscall-mode-none/firmware_fw_run_tests.sh * kselftest-vsyscall-mode-none/lib_bitmap.sh * kselftest-vsyscall-mode-none/lib_prime_numbers.sh * kselftest-vsyscall-mode-none/lib_printf.sh * kselftest-vsyscall-mode-none/lib_strscpy.sh * kselftest-vsyscall-mode-none/livepatch_test-callbacks.sh * kselftest-vsyscall-mode-none/livepatch_test-livepatch.sh * kselftest-vsyscall-mode-none/livepatch_test-shadow-vars.sh * kselftest-vsyscall-mode-none/net_fib-onlink-tests.sh * kselftest-vsyscall-mode-none/net_ip_defrag.sh * kselftest-vsyscall-mode-none/net_pmtu.sh * kselftest-vsyscall-mode-none/net_psock_snd.sh * kselftest-vsyscall-mode-none/net_test_vxlan_under_vrf.sh * kselftest-vsyscall-mode-none/net_xfrm_policy.sh * kselftest-vsyscall-mode-none/timestamping_txtimestamp.sh * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lirc_mode2_user * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/cgroup_test_core * kselftest/dma-buf_udmabuf * kselftest/firmware_fw_run_tests.sh * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/livepatch_test-callbacks.sh * kselftest/livepatch_test-livepatch.sh * kselftest/livepatch_test-shadow-vars.sh * kselftest/net_fib-onlink-tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_xfrm_policy.sh * kselftest/timestamping_txtimestamp.sh Skips ------------------------------------------------------------------------ No skips -- Linaro LKFT https://lkft.linaro.org

5 years, 8 months

1
0
0 0

[PATCH] selftests/net: correct the return value for run_netsocktests

by Po-Hsu Lin

The run_netsocktests will be marked as passed regardless the actual test result from the ./socket: selftests: net: run_netsocktests ======================================== -------------------- running socket test -------------------- [FAIL] ok 1..6 selftests: net: run_netsocktests [PASS] This is because the test script itself has been successfully executed. Fix this by exit 1 when the test failed. Signed-off-by: Po-Hsu Lin <po-hsu.lin(a)canonical.com> --- tools/testing/selftests/net/run_netsocktests | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/run_netsocktests b/tools/testing/selftests/net/run_netsocktests index b093f39c2..14e41fa 100755 --- a/tools/testing/selftests/net/run_netsocktests +++ b/tools/testing/selftests/net/run_netsocktests @@ -7,7 +7,7 @@ echo "--------------------" ./socket if [ $? -ne 0 ]; then echo "[FAIL]" + exit 1 else echo "[PASS]" fi - -- 2.7.4

5 years, 8 months

1
0
0 0

next-20190417 kselftest results

by ci_notify＠linaro.org

Summary ------------------------------------------------------------------------ git repo: not informed git branch: not informed git commit: not informed git describe: not informed Test details: https://qa-reports.linaro.org/lkft/linux-next-oe/build/next-20190417 Regressions (compared to build next-20190416) ------------------------------------------------------------------------ No regressions Fixes (compared to build next-20190416) ------------------------------------------------------------------------ No fixes In total: ------------------------------------------------------------------------ Ran 0 total tests in the following environments and test suites. pass 0 fail 0 xfail 0 skip 0 Environments -------------- - dragonboard-410c - arm64 - hi6220-hikey - arm64 - i386 - juno-r2 - arm64 - x15 - arm - x86_64 Test Suites ----------- Failures ------------------------------------------------------------------------ juno-r2: i386: x86: x15: dragonboard-410c: hi6220-hikey: Skips ------------------------------------------------------------------------ No skips -- Linaro LKFT https://lkft.linaro.org

5 years, 9 months

1
0
0 0

[PATCH] doc: kselftest: Fix KBUILD_OUTPUT usage instructions

by Shuah Khan

Fix KBUILD_OUTPUT usage instructions. The current documentation is incorrect. Signed-off-by: Shuah Khan <shuah(a)kernel.org> --- Documentation/dev-tools/kselftest.rst | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst index c8c03388b9de..6c910ddaa9f9 100644 --- a/Documentation/dev-tools/kselftest.rst +++ b/Documentation/dev-tools/kselftest.rst @@ -39,9 +39,9 @@ Build and run from user specific object directory (make O=dir):: $ make O=/tmp/kselftest kselftest -Build and run KBUILD_OUTPUT directory (make KBUILD_OUTPUT=):: +Build and run from KBUILD_OUTPUT directory (make KBUILD_OUTPUT=):: - $ make KBUILD_OUTPUT=/tmp/kselftest kselftest + $ export KBUILD_OUTPUT=/tmp/kselftest; make kselftest The above commands run the tests and print pass/fail summary to make it easier to understand the test results. Please find the detailed individual @@ -65,9 +65,9 @@ Build and run from user specific object directory (make O=dir):: $ make O=/tmp/kselftest TARGETS="size timers" kselftest -Build and run KBUILD_OUTPUT directory (make KBUILD_OUTPUT=):: +Build and run from KBUILD_OUTPUT directory (make KBUILD_OUTPUT=):: - $ make KBUILD_OUTPUT=/tmp/kselftest TARGETS="size timers" kselftest + $ export KBUILD_OUTPUT=/tmp/kselftest; make TARGETS="size timers" kselftest The above commands run the tests and print pass/fail summary to make it easier to understand the test results. Please find the detailed individual -- 2.17.1

5 years, 9 months

3
4
0 0

[PATCH v5 1/3] Provide in-kernel headers to make extending kernel easier

by Joel Fernandes (Google)

Introduce in-kernel headers and other artifacts which are made available as an archive through proc (/proc/kheaders.tar.xz file). This archive makes it possible to build kernel modules, run eBPF programs, and other tracing programs that need to extend the kernel for tracing purposes without any dependency on the file system having headers and build artifacts. On Android and embedded systems, it is common to switch kernels but not have kernel headers available on the file system. Further once a different kernel is booted, any headers stored on the file system will no longer be useful. By storing the headers as a compressed archive within the kernel, we can avoid these issues that have been a hindrance for a long time. The best way to use this feature is by building it in. Several users have a need for this, when they switch debug kernels, they donot want to update the filesystem or worry about it where to store the headers on it. However, the feature is also buildable as a module in case the user desires it not being part of the kernel image. This makes it possible to load and unload the headers from memory on demand. A tracing program, or a kernel module builder can load the module, do its operations, and then unload the module to save kernel memory. The total memory needed is 3.8MB. By having the archive available at a fixed location independent of filesystem dependencies and conventions, all debugging tools can directly refer to the fixed location for the archive, without concerning with where the headers on a typical filesystem which significantly simplifies tooling that needs kernel headers. The code to read the headers is based on /proc/config.gz code and uses the same technique to embed the headers. To build a module, the below steps have been tested on an x86 machine: modprobe kheaders rm -rf $HOME/headers mkdir -p $HOME/headers tar -xvf /proc/kheaders.tar.xz -C $HOME/headers >/dev/null cd my-kernel-module make -C $HOME/headers M=$(pwd) modules rmmod kheaders Additional notes: (1) external modules must be built on the same arch as the host that built vmlinux. This can be done either in a qemu emulated chroot on the target, or natively. This is due to host arch dependency of kernel scripts. (2) If module building is used, since Module.symvers is not available in the archive due to a cyclic dependency with building of the archive into the kernel or module binaries, the modules built using the archive will not contain symbol versioning (modversion). This is usually not an issue since the idea of this patch is to build a kernel module on the fly and load it into the same kernel. An appropriate warning is already printed by the kernel to alert the user of modules not having modversions when built using the archive. For building with modversions, the user can use traditional header packages. For our tracing usecases, we build modules on the fly with this so it is not a concern. (3) I have left IKHD_ST and IKHD_ED markers as is to facilitate future patches that would extract the headers from a kernel or module image. (v4 was Tested-by the following folks, v5 only has minor changes and has passed my testing). Tested-by: qais.yousef(a)arm.com Tested-by: dietmar.eggemann(a)arm.com Tested-by: linux(a)manojrajarao.com Signed-off-by: Joel Fernandes (Google) <joel(a)joelfernandes.org> --- v4 -> v5: (Thanks to Masahiro Yamada for several excellent suggestions) - used incbin instead of bin2c (Masahiro did similar idea) - added module.lds if ia64 otherwise ia64 may fail to build. - added clean-files rule to Makefile - removed strip-comments script and doing it inline - added set -e to header generated to die on errorsr - fixed a minor issue where find command was noisy. - removed unneeded tar.xz rule from kernel/.gitignore - added Tested-by tags from ARM folks. Changes since v3: - Blank tar was being generated because of a one line I forgot to push. It is updated now. - Added module.lds since arm64 needs it to build modules. Changes since v2: (Thanks to Masahiro Yamada for several excellent suggestions) - Added support for out of tree builds. - Added incremental build support bringing down build time of incremental builds from 50 seconds to 5 seconds. - Fixed various small nits / cleanups. - clean ups to kheaders.c pointed by Alexey Dobriyan. - Fixed MODULE_LICENSE in test module and kheaders.c - Dropped Module.symvers from archive due to circular dependency. Changes since v1: - removed IKH_EXTRA variable, not needed (Masahiro Yamada) - small fix ups to selftest - added target to main Makefile etc - added MODULE_LICENSE to test module - made selftest more quiet Changes since RFC: Both changes bring size down to 3.8MB: - use xz for compression - strip comments except SPDX lines - Call out the module name in Kconfig - Also added selftests in second patch to ensure headers are always working. init/Kconfig | 11 ++++++ kernel/.gitignore | 1 + kernel/Makefile | 28 ++++++++++++++ kernel/kheaders.c | 73 +++++++++++++++++++++++++++++++++++ scripts/gen_ikh_data.sh | 84 +++++++++++++++++++++++++++++++++++++++++ 5 files changed, 197 insertions(+) create mode 100644 kernel/kheaders.c create mode 100755 scripts/gen_ikh_data.sh diff --git a/init/Kconfig b/init/Kconfig index 4592bf7997c0..ea75bfbf7dfa 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -580,6 +580,17 @@ config IKCONFIG_PROC This option enables access to the kernel configuration file through /proc/config.gz. +config IKHEADERS_PROC + tristate "Enable kernel header artifacts through /proc/kheaders.tar.xz" + depends on PROC_FS + help + This option enables access to the kernel header and other artifacts that + are generated during the build process. These can be used to build kernel + modules or by other in-kernel programs such as those generated by eBPF + and systemtap tools. If you build the headers as a module, a module + called kheaders.ko is built which can be loaded on-demand to get access + to the headers. + config LOG_BUF_SHIFT int "Kernel log buffer size (16 => 64KB, 17 => 128KB)" range 12 25 diff --git a/kernel/.gitignore b/kernel/.gitignore index 6e699100872f..34d1e77ee9df 100644 --- a/kernel/.gitignore +++ b/kernel/.gitignore @@ -1,5 +1,6 @@ # # Generated files # +kheaders.md5 timeconst.h hz.bc diff --git a/kernel/Makefile b/kernel/Makefile index 6c57e78817da..7c486bc25fd7 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -70,6 +70,7 @@ obj-$(CONFIG_UTS_NS) += utsname.o obj-$(CONFIG_USER_NS) += user_namespace.o obj-$(CONFIG_PID_NS) += pid_namespace.o obj-$(CONFIG_IKCONFIG) += configs.o +obj-$(CONFIG_IKHEADERS_PROC) += kheaders.o obj-$(CONFIG_SMP) += stop_machine.o obj-$(CONFIG_KPROBES_SANITY_TEST) += test_kprobes.o obj-$(CONFIG_AUDIT) += audit.o auditfilter.o @@ -121,3 +122,30 @@ $(obj)/configs.o: $(obj)/config_data.gz targets += config_data.gz $(obj)/config_data.gz: $(KCONFIG_CONFIG) FORCE $(call if_changed,gzip) + +# Build a list of in-kernel headers for building kernel modules +ikh_file_list := include/ +ikh_file_list += arch/$(SRCARCH)/Makefile +ikh_file_list += arch/$(SRCARCH)/include/ +ikh_file_list += arch/$(SRCARCH)/module.lds +ikh_file_list += arch/$(SRCARCH)/kernel/module.lds +ikh_file_list += scripts/ +ikh_file_list += Makefile + +# Things we need from the $objtree. "OBJDIR" is for the gen_ikh_data.sh +# script to identify that this comes from the $objtree directory +ikh_file_list += OBJDIR/scripts/ +ikh_file_list += OBJDIR/include/ +ikh_file_list += OBJDIR/arch/$(SRCARCH)/include/ +ifeq ($(CONFIG_STACK_VALIDATION), y) +ikh_file_list += OBJDIR/tools/objtool/objtool +endif + +$(obj)/kheaders.o: $(obj)/kheaders_data.tar.xz + +quiet_cmd_genikh = GEN $(obj)/kheaders_data.tar.xz +cmd_genikh = $(srctree)/scripts/gen_ikh_data.sh $@ $(ikh_file_list) +$(obj)/kheaders_data.tar.xz: FORCE + $(call cmd,genikh) + +clean-files := kheaders_data.tar.xz kheaders.md5 diff --git a/kernel/kheaders.c b/kernel/kheaders.c new file mode 100644 index 000000000000..d072a958a8f1 --- /dev/null +++ b/kernel/kheaders.c @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * kernel/kheaders.c + * Provide headers and artifacts needed to build kernel modules. + * (Borrowed code from kernel/configs.c) + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/proc_fs.h> +#include <linux/init.h> +#include <linux/uaccess.h> + +/* + * Define kernel_headers_data and kernel_headers_data_end, within which the the + * compressed kernel headers are stpred. The file is first compressed with xz. + */ + +asm ( +" .pushsection .rodata, \"a\" \n" +" .global kernel_headers_data \n" +"kernel_headers_data: \n" +" .incbin \"kernel/kheaders_data.tar.xz\" \n" +" .global kernel_headers_data_end \n" +"kernel_headers_data_end: \n" +" .popsection \n" +); + +extern char kernel_headers_data; +extern char kernel_headers_data_end; + +static ssize_t +ikheaders_read_current(struct file *file, char __user *buf, + size_t len, loff_t *offset) +{ + return simple_read_from_buffer(buf, len, offset, + &kernel_headers_data, + &kernel_headers_data_end - + &kernel_headers_data); +} + +static const struct file_operations ikheaders_file_ops = { + .read = ikheaders_read_current, + .llseek = default_llseek, +}; + +static int __init ikheaders_init(void) +{ + struct proc_dir_entry *entry; + + /* create the current headers file */ + entry = proc_create("kheaders.tar.xz", S_IRUGO, NULL, + &ikheaders_file_ops); + if (!entry) + return -ENOMEM; + + proc_set_size(entry, + &kernel_headers_data_end - + &kernel_headers_data); + return 0; +} + +static void __exit ikheaders_cleanup(void) +{ + remove_proc_entry("kheaders.tar.xz", NULL); +} + +module_init(ikheaders_init); +module_exit(ikheaders_cleanup); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Joel Fernandes"); +MODULE_DESCRIPTION("Echo the kernel header artifacts used to build the kernel"); diff --git a/scripts/gen_ikh_data.sh b/scripts/gen_ikh_data.sh new file mode 100755 index 000000000000..3f9cae72c2a4 --- /dev/null +++ b/scripts/gen_ikh_data.sh @@ -0,0 +1,84 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# This script generates an archive consisting of kernel headers +# for CONFIG_IKHEADERS_PROC. +set -e + +spath="$(dirname "$(readlink -f "$0")")" +kroot="$spath/.." +outdir="$(pwd)" +tarfile=$1 +cpio_dir=$outdir/$tarfile.tmp + +file_list=${@:2} + +src_file_list="" +for f in $file_list; do + if [ ! -f "$kroot/$f" ] && [ ! -d "$kroot/$f" ]; then continue; fi + src_file_list="$src_file_list $(echo $f | grep -v OBJDIR)" +done + +obj_file_list="" +for f in $file_list; do + f=$(echo $f | grep OBJDIR | sed -e 's/OBJDIR\///g') + if [ ! -f $f ] && [ ! -d $f ]; then continue; fi + obj_file_list="$obj_file_list $f"; +done + +# Support incremental builds by skipping archive generation +# if timestamps of files being archived are not changed. + +# This block is useful for debugging the incremental builds. +# Uncomment it for debugging. +# iter=1 +# if [ ! -f /tmp/iter ]; then echo 1 > /tmp/iter; +# else; iter=$(($(cat /tmp/iter) + 1)); fi +# find $src_file_list -type f | xargs ls -lR > /tmp/src-ls-$iter +# find $obj_file_list -type f | xargs ls -lR > /tmp/obj-ls-$iter + +# modules.order and include/generated/compile.h are ignored because these are +# touched even when none of the source files changed. This causes pointless +# regeneration, so let us ignore them for md5 calculation. +pushd $kroot > /dev/null +src_files_md5="$(find $src_file_list -type f ! -name modules.order | + grep -v "include/generated/compile.h" | + xargs ls -lR | md5sum | cut -d ' ' -f1)" +popd > /dev/null +obj_files_md5="$(find $obj_file_list -type f ! -name modules.order | + grep -v "include/generated/compile.h" | + xargs ls -lR | md5sum | cut -d ' ' -f1)" + +if [ -f $tarfile ]; then tarfile_md5="$(md5sum $tarfile | cut -d ' ' -f1)"; fi +if [ -f kernel/kheaders.md5 ] && + [ "$(cat kernel/kheaders.md5|head -1)" == "$src_files_md5" ] && + [ "$(cat kernel/kheaders.md5|head -2|tail -1)" == "$obj_files_md5" ] && + [ "$(cat kernel/kheaders.md5|tail -1)" == "$tarfile_md5" ]; then + exit +fi + +rm -rf $cpio_dir +mkdir $cpio_dir + +pushd $kroot > /dev/null +for f in $src_file_list; + do find "$f" ! -name "*.c" ! -name "*.o" ! -name "*.cmd" ! -name ".*"; +done | cpio --quiet -pd $cpio_dir +popd > /dev/null + +# The second CPIO can complain if files already exist which can +# happen with out of tree builds. Just silence CPIO for now. +for f in $obj_file_list; + do find "$f" ! -name "*.c" ! -name "*.o" ! -name "*.cmd" ! -name ".*"; +done | cpio --quiet -pd $cpio_dir >/dev/null 2>&1 + +find $cpio_dir -type f -print0 | + xargs -0 -P8 -n1 perl -pi -e 'BEGIN {undef $/;}; s/\/\*((?!SPDX).)*?\*\///smg;' + +tar -Jcf $tarfile -C $cpio_dir/ . > /dev/null + +echo "$src_files_md5" > kernel/kheaders.md5 +echo "$obj_files_md5" >> kernel/kheaders.md5 +echo "$(md5sum $tarfile | cut -d ' ' -f1)" >> kernel/kheaders.md5 + +rm -rf $cpio_dir -- 2.21.0.225.g810b269d1ac-goog

5 years, 9 months

13
41
0 0

[PATCH] selftests: fix headers_install circular dependency

by Shuah Khan

"make kselftest" fails with "Circular Makefile.o <- prepare dependency dropped." error, when lib.mk invokes "make headers_install". Make level 0: Main make calls selftests run_tests target ... Make level n: selftests lib.mk invokes main make's headers_install The secondary level make inherits builtin-rules which will use the rule to generate Makefile.o and runs into "Circular Makefile.o <- prepare dependency dropped." error, and kselftest compile fails. Invoke headers_install target with --no-builtin-rules to avoid circular error. In addition, lib.mk installs headers in the default HDR_PATH, even when build relocation is requested with O= or export KBUILD_OUTPUT. Fix the problem by passing in INSTALL_HDR_PATH. The headers are installed under the specified output "dir/usr". Signed-off-by: Shuah Khan <shuah(a)kernel.org> --- tools/testing/selftests/Makefile | 52 +++++++++++++++++++++++++++----- tools/testing/selftests/lib.mk | 34 +++++++++++++++++++-- 2 files changed, 76 insertions(+), 10 deletions(-) diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 971fc8428117..743cd374d07d 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -75,12 +75,15 @@ ifneq ($(KBUILD_SRC),) override LDFLAGS = endif -BUILD := $(O) -ifndef BUILD - BUILD := $(KBUILD_OUTPUT) -endif -ifndef BUILD - BUILD := $(shell pwd) +ifneq ($(O),) + BUILD := $(O) +else + ifneq ($(KBUILD_OUTPUT),) + BUILD := $(KBUILD_OUTPUT) + else + BUILD := $(shell pwd) + DEFAULT_INSTALL_HDR_PATH := 1 + endif endif # KSFT_TAP_LEVEL is used from KSFT framework to prevent nested TAP header @@ -89,8 +92,41 @@ endif # with system() call. Export it here to cover override RUN_TESTS defines. export KSFT_TAP_LEVEL=`echo 1` +# Prepare for headers install +top_srcdir ?= ../../.. +include $(top_srcdir)/scripts/subarch.include +ARCH ?= $(SUBARCH) +export KSFT_KHDR_INSTALL_DONE := 1 export BUILD -all: + +# set default goal to all, so make without a target runs all, even when +# all isn't the first target in the file. +.DEFAULT_GOAL := all + +# Install headers here once for all tests. KSFT_KHDR_INSTALL_DONE +# is used to avoid running headers_install from lib.mk. +# Invoke headers install with --no-builtin-rules to avoid circular +# dependency in "make kselftest" case. In this case, second level +# make inherits builtin-rules which will use the rule generate +# Makefile.o and runs into +# "Circular Makefile.o <- prepare dependency dropped." +# and headers_install fails and test compile fails. +# +# O= KBUILD_OUTPUT cases don't run into this error, since main Makefile +# invokes them as sub-makes and --no-builtin-rules is not necessary, +# but doesn't cause any failures. Keep it simple and use the same +# flags in both cases. +# Local build cases: "make kselftest", "make -C" - headers are installed +# in the default INSTALL_HDR_PATH usr/include. +khdr: +ifeq (1,$(DEFAULT_INSTALL_HDR_PATH)) + make --no-builtin-rules ARCH=$(ARCH) -C $(top_srcdir) headers_install +else + make --no-builtin-rules INSTALL_HDR_PATH=$$BUILD/usr \ + ARCH=$(ARCH) -C $(top_srcdir) headers_install +endif + +all: khdr @for TARGET in $(TARGETS); do \ BUILD_TARGET=$$BUILD/$$TARGET; \ mkdir $$BUILD_TARGET -p; \ @@ -173,4 +209,4 @@ clean: make OUTPUT=$$BUILD_TARGET -C $$TARGET clean;\ done; -.PHONY: all run_tests hotplug run_hotplug clean_hotplug run_pstore_crash install clean +.PHONY: khdr all run_tests hotplug run_hotplug clean_hotplug run_pstore_crash install clean diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk index 8b0f16409ed7..f888522a34e9 100644 --- a/tools/testing/selftests/lib.mk +++ b/tools/testing/selftests/lib.mk @@ -3,7 +3,16 @@ CC := $(CROSS_COMPILE)gcc ifeq (0,$(MAKELEVEL)) -OUTPUT := $(shell pwd) + ifneq ($(O),) + OUTPUT := $(O) + else + ifneq ($(KBUILD_OUTPUT),) + OUTPUT := $(KBUILD_OUTPUT) + else + OUTPUT := $(shell pwd) + DEFAULT_INSTALL_HDR_PATH := 1 + endif + endif endif # The following are built by lib.mk common compile rules. @@ -21,9 +30,30 @@ top_srcdir ?= ../../../.. include $(top_srcdir)/scripts/subarch.include ARCH ?= $(SUBARCH) +# Invoke headers install with --no-builtin-rules to avoid circular +# dependency in "make kselftest" case. In this case, second level +# make inherits builtin-rules which will use the rule generate +# Makefile.o and runs into +# "Circular Makefile.o <- prepare dependency dropped." +# and headers_install fails and test compile fails. +# O= KBUILD_OUTPUT cases don't run into this error, since main Makefile +# invokes them as sub-makes and --no-builtin-rules is not necessary, +# but doesn't cause any failures. Keep it simple and use the same +# flags in both cases. +# Note that the support to install headers from lib.mk is necessary +# when test Makefile is run directly with "make -C". +# When local build is done, headers are installed in the default +# INSTALL_HDR_PATH usr/include. .PHONY: khdr khdr: - make ARCH=$(ARCH) -C $(top_srcdir) headers_install +ifndef KSFT_KHDR_INSTALL_DONE +ifeq (1,$(DEFAULT_INSTALL_HDR_PATH)) + make --no-builtin-rules ARCH=$(ARCH) -C $(top_srcdir) headers_install +else + make --no-builtin-rules INSTALL_HDR_PATH=$$OUTPUT/usr \ + ARCH=$(ARCH) -C $(top_srcdir) headers_install +endif +endif all: khdr $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES) else -- 2.17.1

5 years, 9 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror