- Linux-kselftest-mirror - lists.linaro.org

📈 Boost Your Rankings in Just 30 Days with Our One-Time SEO Plan!

by SEO MAX

Hi there, That’s right! With our one-time, one-month SEO plan , we’re ready to take your website’s rankings to the next level. Our team will implement proven strategies to optimize your site and secure quality backlinks, all designed to increase your visibility and drive results. Here’s what you’ll get: Full transparency on our work and approach. Comprehensive reports delivered within 30 days. Ready to see the difference? Try us today: https://www.1seo-max.com/get-started/ (https://www.1seo-max.com/get-started/) Or chat with us on Whatsapp: https://www.1seo-max.com/whatsapp-with-us/ (https://www.1seo-max.com/whatsapp-with-us/) Cheers, Mike Arnold Get a free SEO Consultation (https://www.1seo-max.com/free-seo-consultaition/) Unsubscribe (https://clicks.1seo-max.com/?na=u&nk=1182396-88a37ab464&nek=24-) | Manage your subscription (https://clicks.1seo-max.com/?na=p&nk=1182396-88a37ab464&nek=24-) | View online (https://clicks.1seo-max.com/?na=v&nk=1182396-88a37ab464&id=24) whatsapp

4 months, 2 weeks

1
0
0 0

[PATCH 0/4] KVM: selftests: dirty_log_test: fixes for running the test nested

by Maxim Levitsky

As a part of the effort to start running kvm selftests nested, this patch series contains several fixes to the dirty_log_test, which allows this test to run nested very well. I also included a mostly nop change to KVM, to reverse the order in which the PML log is read to align more closely to the hardware. It should not affect regular users of the dirty logging but it fixes a unit test specific assumption in the dirty_log_test dirty-ring mode. Patch 4 fixes a very rare problem, which is hard to reproduce with standard test parameters, but due to some weird timing issue, it actually happened a few times on my machine which prompted me to investigate it. The issue can be reproduced well by running the test nested (without patch 4 applied) with a very short iteration time and with a few iterations in a loop like this: while ./dirty_log_test -i 10 -I 1 -M dirty-ring ; do true ; done Or even better, it's possible to manually patch the test to not wait at all (effectively setting iteration time to 0), then it fails pretty fast. Best regards, Maxim Levitsky Maxim Levitsky (4): KVM: VMX: read the PML log in the same order as it was written KVM: selftests: dirty_log_test: Limit s390x workaround to s390x KVM: selftests: dirty_log_test: run the guest until some dirty ring entries were harvested KVM: selftests: dirty_log_test: support multiple write retires arch/x86/kvm/vmx/vmx.c | 32 +++++--- arch/x86/kvm/vmx/vmx.h | 1 + tools/testing/selftests/kvm/dirty_log_test.c | 79 +++++++++++++++++--- 3 files changed, 91 insertions(+), 21 deletions(-) -- 2.26.3

4 months, 2 weeks

2
9
0 0

[PATCH v2 0/3] drivers: base: Don't match device with NULL of_node/fwnode/etc + tests

by Brian Norris

This series: 1. makes the behavior of_find_device_by_node(), bus_find_device_by_of_node(), bus_find_device_by_fwnode(), etc., more consistent when provided with a NULL node/handle; 2. adds kunit tests to validate the new NULL-argument behavior; and 3. makes some related improvements and refactoring for the drivers/base/ kunit tests. This series aims to prevent problems like the ones resolved in commit 5c8418cf4025 ("PCI/pwrctrl: Unregister platform device only if one actually exists"). Changes in v2: * Add Rob's Reviewed-by * CC LKML (oops!) * Keep "devm" and "match" tests in separate suites Brian Norris (3): drivers: base: Don't match devices with NULL of_node/fwnode/etc drivers: base: test: Enable device model tests with KUNIT_ALL_TESTS drivers: base: test: Add ...find_device_by...(... NULL) tests drivers/base/core.c | 8 ++--- drivers/base/test/Kconfig | 1 + drivers/base/test/platform-device-test.c | 42 +++++++++++++++++++++++- 3 files changed, 46 insertions(+), 5 deletions(-) -- 2.47.0.338.g60cca15819-goog

4 months, 2 weeks

3
6
0 0

[PATCH v2 0/6] Enhance event delivery error handling

by Ivan Orlov

Currently, the situation when guest accesses MMIO during vectoring is handled differently on VMX and SVM: on VMX KVM returns internal error, when SVM goes into infinite loop trying to deliver an event again and again. This patch series eliminates this difference by returning a KVM internal error when guest performs MMIO during vectoring for both VMX and SVM. Also, introduce a selftest test case which covers the error handling mentioned above. V1 -> V2: - Make commit messages more brief, avoid using pronouns - Extract SVM error handling into a separate commit - Introduce a new X86EMUL_ return type and detect the unhandleable vectoring error in vendor-specific check_emulate_instruction instead of handling it in the common MMU code (which is specific for cached MMIO) Ivan Orlov (6): KVM: x86: Add function for vectoring error generation KVM: x86: Add emulation status for vectoring during MMIO KVM: VMX: Handle vectoring error in check_emulate_instruction KVM: SVM: Handle MMIO during vectroing error selftests: KVM: extract lidt into helper function selftests: KVM: Add test case for MMIO during vectoring arch/x86/include/asm/kvm_host.h | 12 ++++- arch/x86/kvm/kvm_emulate.h | 2 + arch/x86/kvm/svm/svm.c | 9 +++- arch/x86/kvm/vmx/vmx.c | 33 +++++------- arch/x86/kvm/x86.c | 27 ++++++++++ .../selftests/kvm/include/x86_64/processor.h | 7 +++ .../selftests/kvm/set_memory_region_test.c | 53 ++++++++++++++++++- .../selftests/kvm/x86_64/sev_smoke_test.c | 2 +- 8 files changed, 119 insertions(+), 26 deletions(-) -- 2.43.0

4 months, 2 weeks

3
20
0 0

[PATCH v2] kselftest/arm64: abi: fix SVCR detection

by Weizhao Ouyang

When using svcr_in to check ZA and Streaming Mode, we should make sure that the value in x2 is correct, otherwise it may trigger an Illegal instruction if FEAT_SVE and !FEAT_SME. Fixes: 43e3f85523e4 ("kselftest/arm64: Add SME support to syscall ABI test") Signed-off-by: Weizhao Ouyang <o451686892(a)gmail.com> --- .../selftests/arm64/abi/syscall-abi-asm.S | 32 +++++++++---------- 1 file changed, 15 insertions(+), 17 deletions(-) diff --git a/tools/testing/selftests/arm64/abi/syscall-abi-asm.S b/tools/testing/selftests/arm64/abi/syscall-abi-asm.S index df3230fdac39..66ab2e0bae5f 100644 --- a/tools/testing/selftests/arm64/abi/syscall-abi-asm.S +++ b/tools/testing/selftests/arm64/abi/syscall-abi-asm.S @@ -81,32 +81,31 @@ do_syscall: stp x27, x28, [sp, #96] // Set SVCR if we're doing SME - cbz x1, 1f + cbz x1, load_gpr adrp x2, svcr_in ldr x2, [x2, :lo12:svcr_in] msr S3_3_C4_C2_2, x2 -1: // Load ZA and ZT0 if enabled - uses x12 as scratch due to SME LDR - tbz x2, #SVCR_ZA_SHIFT, 1f + tbz x2, #SVCR_ZA_SHIFT, load_gpr mov w12, #0 ldr x2, =za_in -2: _ldr_za 12, 2 +1: _ldr_za 12, 2 add x2, x2, x1 add x12, x12, #1 cmp x1, x12 - bne 2b + bne 1b // ZT0 mrs x2, S3_0_C0_C4_5 // ID_AA64SMFR0_EL1 ubfx x2, x2, #ID_AA64SMFR0_EL1_SMEver_SHIFT, \ #ID_AA64SMFR0_EL1_SMEver_WIDTH - cbz x2, 1f + cbz x2, load_gpr adrp x2, zt_in add x2, x2, :lo12:zt_in _ldr_zt 2 -1: +load_gpr: // Load GPRs x8-x28, and save our SP/FP for later comparison ldr x2, =gpr_in add x2, x2, #64 @@ -125,9 +124,9 @@ do_syscall: str x30, [x2], #8 // LR // Load FPRs if we're not doing neither SVE nor streaming SVE - cbnz x0, 1f + cbnz x0, check_sve_in ldr x2, =svcr_in - tbnz x2, #SVCR_SM_SHIFT, 1f + tbnz x2, #SVCR_SM_SHIFT, check_sve_in ldr x2, =fpr_in ldp q0, q1, [x2] @@ -148,8 +147,8 @@ do_syscall: ldp q30, q31, [x2, #16 * 30] b 2f -1: +check_sve_in: // Load the SVE registers if we're doing SVE/SME ldr x2, =z_in @@ -256,32 +255,31 @@ do_syscall: stp q30, q31, [x2, #16 * 30] // Save SVCR if we're doing SME - cbz x1, 1f + cbz x1, check_sve_out mrs x2, S3_3_C4_C2_2 adrp x3, svcr_out str x2, [x3, :lo12:svcr_out] -1: // Save ZA if it's enabled - uses x12 as scratch due to SME STR - tbz x2, #SVCR_ZA_SHIFT, 1f + tbz x2, #SVCR_ZA_SHIFT, check_sve_out mov w12, #0 ldr x2, =za_out -2: _str_za 12, 2 +1: _str_za 12, 2 add x2, x2, x1 add x12, x12, #1 cmp x1, x12 - bne 2b + bne 1b // ZT0 mrs x2, S3_0_C0_C4_5 // ID_AA64SMFR0_EL1 ubfx x2, x2, #ID_AA64SMFR0_EL1_SMEver_SHIFT, \ #ID_AA64SMFR0_EL1_SMEver_WIDTH - cbz x2, 1f + cbz x2, check_sve_out adrp x2, zt_out add x2, x2, :lo12:zt_out _str_zt 2 -1: +check_sve_out: // Save the SVE state if we have some cbz x0, 1f -- 2.45.2

4 months, 2 weeks

3
2
0 0

[PATCH v2 0/4] sched: Move task_mm_cid_work to mm delayed work

by Gabriele Monaco

This patchset moves the task_mm_cid_work to a preemptible and migratable context. This reduces the impact of this task to the scheduling latency of real time tasks. The change makes the recurrence of the task a bit more predictable. We also add optimisation and fixes to make sure the task_mm_cid_work works as intended. Patch 1 contains the main changes, removing the task_work on the scheduler tick and using a delayed_work instead. Patch 2 adds some optimisations to the approach, since we rely on a delayed_work, it is no longer required to check that the minimum interval passed since execution, we however terminate the call immediately if we see that no mm_cid is actually active, which could happen on processes sleeping for long time or which exited but whose mm has not been freed yet. Patch 3 allows the mm_cids to be actually compacted when a process reduces its number of threads, which was not the case since the same mm_cids were reused to improve cache locality, more details in [1]. Patch 4 adds a selftest to validate the functionality of the task_mm_cid_work (i.e. to compact the mm_cids), this test requires patch 3 to be applied. Changes since V1 [1]: * Re-arm the delayed_work at each invocation * Cancel the work synchronously at mmdrop * Remove next scan fields and completely rely on the delayed_work * Shrink mm_cid allocation with nr thread/affinity (Mathieu Desnoyers) * Add self test OVERHEAD COMPARISON In this section, I'm going to refer to head as the current state upstream without my patch applied, patch is the same head with these patches applied. Likewise, I'm going to refer to task_mm_cid_work as either the task or the function. The experiments are run on an aarch64 machine with 128 cores. The kernel has a bare configuration with PREEMPT_RT enabled. - Memory The patch introduces some memory overhead: * head uses a callback_head per thread (16 bytes) * patch relies on a delayed work per mm but drops a long (80 bytes net) Tasks with 5 threads or less have lower memory footprint with the current approach. Considering a task_struct can be 7-13 kB and an mm_struct is about 1.4 kB, the overhead should be acceptable. - Boot time I tested the patch booting a virtual machine with vng[2], both head and patch get similar boot times (around 8s). - Runtime I run some rather demanding tests to show what could possibly be a worst case in the approach introduced by this patch. The following tests are running again in vng to have a plain system, running mostly the stressors (if there). Unless differently specified, time is in us. All tests run for 30s. The stress-ng tests were run with 128 stressors, I will omit from the table for clarity. No load head patch running processes(threads): 12(12) 12(12) duration(avg,max,sum): 75,426,987 2,42,45ms invocations: 13 20k stress-ng --cpu-load 80 head patch running processes(threads): 129(129) 129(129) duration(avg,max,sum): 20,2ms,740ms 7,774,280ms invocations: 36k 39k stress-ng --fork head patch running processes(threads): 3.6k(3.6k) 4k(4k) duration(avg,max,sum): 34,41,720 19,457,880ms invocations: 21 46k stress-ng --pthread-max 4 head patch running processes(threads): 129(4k) 129(4k) duration(avg,max,sum): 31,195,41ms 21,1ms,830ms invocations: 1290 38k It is important to note that some of those stressors run for a very short period of time to just fork/create a thread, this heavily favours head since the task won't simply run as often. Moreover, the duration time needs to be read carefully, since the task can now be preempted by threads, I tried to exclude that from the computation, but to keep the probes simple, I didn't exclude interference caused by interrupts. On the same system while isolated, the task runs in about 30-35ms, it is hence highly likely that much larger values are only due to interruptions, rather than the function actually running that long. I will post another email with the scripts used to retrieve the data and more details about the runtime distribution. [1] - https://lore.kernel.org/linux-kernel/20241205083110.180134-2-gmonaco@redhat… [2] - https://github.com/arighi/virtme-ng Gabriele Monaco (3): sched: Move task_mm_cid_work to mm delayed work sched: Remove mm_cid_next_scan as obsolete rseq/selftests: Add test for mm_cid compaction Mathieu Desnoyers (1): sched: Compact RSEQ concurrency IDs with reduced threads and affinity include/linux/mm_types.h | 23 ++- include/linux/sched.h | 1 - kernel/sched/core.c | 66 +------- kernel/sched/sched.h | 32 ++-- tools/testing/selftests/rseq/.gitignore | 1 + tools/testing/selftests/rseq/Makefile | 2 +- .../selftests/rseq/mm_cid_compaction_test.c | 157 ++++++++++++++++++ 7 files changed, 203 insertions(+), 79 deletions(-) create mode 100644 tools/testing/selftests/rseq/mm_cid_compaction_test.c base-commit: 231825b2e1ff6ba799c5eaf396d3ab2354e37c6b -- 2.47.1

4 months, 2 weeks

2
11
0 0

I urge you to understand my viewpoint accurately.

by TCWM179483＠ipen.br

I am Tomasz Chmielewski, a Portfolio Manager and Chartered Financial Analyst affiliated with Iwoca Poland Sp. Z OO in Poland. I have the privilege of working with distinguished investors who are eager to support your company's current initiatives, thereby broadening their investment portfolios. If this proposal aligns with your interests, I invite you to respond, and I will gladly share more information to assist you. Yours sincerely, Tomasz Chmielewski Warsaw, Mazowieckie, Poland.

4 months, 2 weeks

1
0
0 0

[PATCH] selftests/powerpc: Fix typo in test-vphn.c

by Zhu Jun

The word 'accross' is wrong, so fix it. Signed-off-by: Zhu Jun <zhujun2(a)cmss.chinamobile.com> --- tools/testing/selftests/powerpc/vphn/test-vphn.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/powerpc/vphn/test-vphn.c b/tools/testing/selftests/powerpc/vphn/test-vphn.c index 81d3069ff..f348f5491 100644 --- a/tools/testing/selftests/powerpc/vphn/test-vphn.c +++ b/tools/testing/selftests/powerpc/vphn/test-vphn.c @@ -275,7 +275,7 @@ static struct test { } }, { - /* Parse a 32-bit value split accross two consecutives 64-bit + /* Parse a 32-bit value split across two consecutives 64-bit * input values. */ "vphn: 16-bit value followed by 2 x 32-bit values", -- 2.17.1

4 months, 2 weeks

2
1
0 0

[PATCHv3 net-next 0/2] selftests: wireguards: use nftables for testing

by Hangbin Liu

This patch set convert iptables to nftables for wireguard testing, as iptables is deparated and nftables is the default framework of most releases. v3: drop iptables directly (Jason A. Donenfeld) Also convert to using nft for qemu testing (Jason A. Donenfeld) v2: use one nft table for testing (Phil Sutter) Hangbin Liu (2): selftests: wireguards: convert iptables to nft selftests: wireguard: update to using nft for qemu test tools/testing/selftests/wireguard/netns.sh | 29 +++++++++----- .../testing/selftests/wireguard/qemu/Makefile | 40 ++++++++++++++----- .../selftests/wireguard/qemu/kernel.config | 7 ++-- 3 files changed, 53 insertions(+), 23 deletions(-) -- 2.39.5 (Apple Git-154)

4 months, 2 weeks

1
2
0 0

[PATCH v2 00/13] iommufd: Add vIOMMU infrastructure (Part-3: vIRQ)

by Nicolin Chen

As the part-3 of the vIOMMU infrastructure, this series introduces a vIRQ object. The existing FAULT object provides a nice notification pathway to the user space already, so let vIRQ reuse the infrastructure. Mimicing the HWPT structure, add a common EVENTQ structure to support its derivatives: EVENTQ_IOPF (the prior FAULT object) and EVENTQ_VIRQ (new). IOMMUFD_CMD_VIRQ_ALLOC is introduced to allocate EVENTQ_VIRQ for vIOMMUs. One vIOMMU can have multiple vIRQs in different types but can not support multiple vIRQs with the same types. The forwarding part is fairly simple but might need to replace a physical device ID with a virtual device ID in a driver-level IRQ data structure. So, this comes with some helpers for drivers to use. As usual, this series comes with the selftest coverage for this new vIRQ, and with a real world use case in the ARM SMMUv3 driver. This is on Github: https://github.com/nicolinc/iommufd/commits/iommufd_virq-v2 Testing with RMR patches for MSI: https://github.com/nicolinc/iommufd/commits/iommufd_virq-v2-with-rmr Paring QEMU branch for testing: https://github.com/nicolinc/qemu/commits/wip/for_iommufd_virq-v2 Changelog v2 * Rebased on v6.13-rc1 * Added IOPF and vIRQ in iommufd.rst (userspace-api) * Added a proper locking in iommufd_event_virq_destroy * Added iommufd_event_virq_abort with a lockdep_assert_held * Renamed "EVENT_*" to "EVENTQ_*" to describe the objects better * Reorganized flows in iommufd_eventq_virq_alloc for abort() to work * Added struct arm_smmu_vmaster to store vSID upon attaching to a nested domain, calling a newly added iommufd_viommu_get_vdev_id helper * Added an arm_vmaster_report_event helper in arm-smmu-v3-iommufd file to simplify the routine in arm_smmu_handle_evt() of the main driver v1 https://lore.kernel.org/all/cover.1724777091.git.nicolinc@nvidia.com/ Thanks! Nicolin Nicolin Chen (13): iommufd/fault: Add an iommufd_fault_init() helper iommufd/fault: Move iommufd_fault_iopf_handler() to header iommufd: Rename IOMMUFD_OBJ_FAULT to IOMMUFD_OBJ_EVENTQ_IOPF iommufd: Rename fault.c to eventq.c iommufd: Add IOMMUFD_OBJ_EVENTQ_VIRQ and IOMMUFD_CMD_VIRQ_ALLOC iommufd/viommu: Add iommufd_viommu_get_vdev_id helper iommufd/viommu: Add iommufd_viommu_report_irq helper iommufd/selftest: Require vdev_id when attaching to a nested domain iommufd/selftest: Add IOMMU_TEST_OP_TRIGGER_VIRQ for vIRQ coverage iommufd/selftest: Add EVENT_VIRQ test coverage Documentation: userspace-api: iommufd: Update EVENTQ_IOPF and EVENTQ_VIRQ iommu/arm-smmu-v3: Introduce struct arm_smmu_vmaster iommu/arm-smmu-v3: Report IRQs that belong to devices attached to vIOMMU drivers/iommu/iommufd/Makefile | 2 +- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 30 + drivers/iommu/iommufd/iommufd_private.h | 150 ++++- drivers/iommu/iommufd/iommufd_test.h | 10 + include/linux/iommufd.h | 22 +- include/uapi/linux/iommufd.h | 45 ++ tools/testing/selftests/iommu/iommufd_utils.h | 63 ++ .../arm/arm-smmu-v3/arm-smmu-v3-iommufd.c | 65 ++ drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 94 ++- drivers/iommu/iommufd/driver.c | 59 ++ drivers/iommu/iommufd/eventq.c | 612 ++++++++++++++++++ drivers/iommu/iommufd/fault.c | 444 ------------- drivers/iommu/iommufd/hw_pagetable.c | 12 +- drivers/iommu/iommufd/main.c | 14 +- drivers/iommu/iommufd/selftest.c | 53 ++ drivers/iommu/iommufd/viommu.c | 2 + tools/testing/selftests/iommu/iommufd.c | 27 + .../selftests/iommu/iommufd_fail_nth.c | 6 + Documentation/userspace-api/iommufd.rst | 19 + 19 files changed, 1218 insertions(+), 511 deletions(-) create mode 100644 drivers/iommu/iommufd/eventq.c delete mode 100644 drivers/iommu/iommufd/fault.c base-commit: 2ca704f55e22b7b00cc7025953091af3c82fa5c0 -- 2.43.0

4 months, 2 weeks

2
31
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror