July 2025 - Linux-kselftest-mirror

[PATCH][next] tools/testing/selftests: Fix spelling mistake "unnmap" -> "unmap"

by Colin Ian King

There is a spelling mistake in ksft_test_result_fail messages. Fix them. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- tools/testing/selftests/mm/mremap_test.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/mm/mremap_test.c b/tools/testing/selftests/mm/mremap_test.c index fccf9e797a0c..774cdba102fc 100644 --- a/tools/testing/selftests/mm/mremap_test.c +++ b/tools/testing/selftests/mm/mremap_test.c @@ -525,10 +525,10 @@ static void mremap_move_multiple_vmas(unsigned int pattern_seed, out: if (success) ksft_test_result_pass("%s%s\n", test_name, - dont_unmap ? " [dontunnmap]" : ""); + dont_unmap ? " [dontunmap]" : ""); else ksft_test_result_fail("%s%s\n", test_name, - dont_unmap ? " [dontunnmap]" : ""); + dont_unmap ? " [dontunmap]" : ""); } static void mremap_shrink_multiple_vmas(unsigned long page_size, @@ -727,10 +727,10 @@ static void mremap_move_multiple_vmas_split(unsigned int pattern_seed, out: if (success) ksft_test_result_pass("%s%s\n", test_name, - dont_unmap ? " [dontunnmap]" : ""); + dont_unmap ? " [dontunmap]" : ""); else ksft_test_result_fail("%s%s\n", test_name, - dont_unmap ? " [dontunnmap]" : ""); + dont_unmap ? " [dontunmap]" : ""); } /* Returns the time taken for the remap on success else returns -1. */ -- 2.50.0

2 months, 2 weeks

5
4
0 0

[PATCH/RFC] kunit/rtc: Add real support for very slow tests

by Geert Uytterhoeven

When running rtc_lib_test ("lib_test" before my "[PATCH] rtc: Rename lib_test to rtc_lib_test") on m68k/ARAnyM: KTAP version 1 1..1 KTAP version 1 # Subtest: rtc_lib_test_cases # module: rtc_lib_test 1..2 # rtc_time64_to_tm_test_date_range_1000: Test should be marked slow (runtime: 3.222371420s) ok 1 rtc_time64_to_tm_test_date_range_1000 # rtc_time64_to_tm_test_date_range_160000: try timed out # rtc_time64_to_tm_test_date_range_160000: test case timed out # rtc_time64_to_tm_test_date_range_160000.speed: slow not ok 2 rtc_time64_to_tm_test_date_range_160000 # rtc_lib_test_cases: pass:1 fail:1 skip:0 total:2 # Totals: pass:1 fail:1 skip:0 total:2 not ok 1 rtc_lib_test_cases Commit 02c2d0c2a84172c3 ("kunit: Add speed attribute") added the notion of "very slow" tests, but this is further unused and unhandled. Hence: 1. Introduce KUNIT_CASE_VERY_SLOW(), 2. Increase timeout by ten; ideally this should only be done for very slow tests, but I couldn't find how to access kunit_case.attr.case from kunit_try_catch_run(), 3. Mark rtc_time64_to_tm_test_date_range_1000 slow, 4. Mark rtc_time64_to_tm_test_date_range_160000 very slow. Afterwards: KTAP version 1 1..1 KTAP version 1 # Subtest: rtc_lib_test_cases # module: rtc_lib_test 1..2 # rtc_time64_to_tm_test_date_range_1000.speed: slow ok 1 rtc_time64_to_tm_test_date_range_1000 # rtc_time64_to_tm_test_date_range_160000.speed: very_slow ok 2 rtc_time64_to_tm_test_date_range_160000 # rtc_lib_test_cases: pass:2 fail:0 skip:0 total:2 # Totals: pass:2 fail:0 skip:0 total:2 ok 1 rtc_lib_test_cases Signed-off-by: Geert Uytterhoeven <geert(a)linux-m68k.org> --- drivers/rtc/rtc_lib_test.c | 4 ++-- include/kunit/test.h | 11 +++++++++++ lib/kunit/try-catch.c | 3 ++- 3 files changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/rtc/rtc_lib_test.c b/drivers/rtc/rtc_lib_test.c index c30c759662e39b48..fd3210e39d37dbc6 100644 --- a/drivers/rtc/rtc_lib_test.c +++ b/drivers/rtc/rtc_lib_test.c @@ -85,8 +85,8 @@ static void rtc_time64_to_tm_test_date_range_1000(struct kunit *test) } static struct kunit_case rtc_lib_test_cases[] = { - KUNIT_CASE(rtc_time64_to_tm_test_date_range_1000), - KUNIT_CASE_SLOW(rtc_time64_to_tm_test_date_range_160000), + KUNIT_CASE_SLOW(rtc_time64_to_tm_test_date_range_1000), + KUNIT_CASE_VERY_SLOW(rtc_time64_to_tm_test_date_range_160000), {} }; diff --git a/include/kunit/test.h b/include/kunit/test.h index 9b773406e01f3c43..4e3c1cae5b41466e 100644 --- a/include/kunit/test.h +++ b/include/kunit/test.h @@ -183,6 +183,17 @@ static inline char *kunit_status_to_ok_not_ok(enum kunit_status status) { .run_case = test_name, .name = #test_name, \ .attr.speed = KUNIT_SPEED_SLOW, .module_name = KBUILD_MODNAME} +/** + * KUNIT_CASE_VERY_SLOW - A helper for creating a &struct kunit_case + * with the very slow attribute + * + * @test_name: a reference to a test case function. + */ + +#define KUNIT_CASE_VERY_SLOW(test_name) \ + { .run_case = test_name, .name = #test_name, \ + .attr.speed = KUNIT_SPEED_VERY_SLOW, .module_name = KBUILD_MODNAME} + /** * KUNIT_CASE_PARAM - A helper for creation a parameterized &struct kunit_case * diff --git a/lib/kunit/try-catch.c b/lib/kunit/try-catch.c index 6bbe0025b0790bd2..92099c67bb21d0a4 100644 --- a/lib/kunit/try-catch.c +++ b/lib/kunit/try-catch.c @@ -56,7 +56,8 @@ static unsigned long kunit_test_timeout(void) * If tests timeout due to exceeding sysctl_hung_task_timeout_secs, * the task will be killed and an oops generated. */ - return 300 * msecs_to_jiffies(MSEC_PER_SEC); /* 5 min */ + // FIXME times ten for KUNIT_SPEED_VERY_SLOW? + return 10 * 300 * msecs_to_jiffies(MSEC_PER_SEC); /* 5 min */ } void kunit_try_catch_run(struct kunit_try_catch *try_catch, void *context) -- 2.43.0

2 months, 2 weeks

3
3
0 0

[PATCH net-next v2 4/4] selftests: drv-net: add test for RSS on flow label

by Jakub Kicinski

Add a simple test for checking that RSS on flow label works, and that its rejected for IPv4 flows. # ./tools/testing/selftests/drivers/net/hw/rss_flow_label.py TAP version 13 1..2 ok 1 rss_flow_label.test_rss_flow_label ok 2 rss_flow_label.test_rss_flow_label_6only # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: shuah(a)kernel.org CC: sdf(a)fomichev.me CC: linux-kselftest(a)vger.kernel.org --- .../testing/selftests/drivers/net/hw/Makefile | 1 + .../drivers/net/hw/rss_flow_label.py | 151 ++++++++++++++++++ 2 files changed, 152 insertions(+) create mode 100755 tools/testing/selftests/drivers/net/hw/rss_flow_label.py diff --git a/tools/testing/selftests/drivers/net/hw/Makefile b/tools/testing/selftests/drivers/net/hw/Makefile index fdc97355588c..5159fd34cb33 100644 --- a/tools/testing/selftests/drivers/net/hw/Makefile +++ b/tools/testing/selftests/drivers/net/hw/Makefile @@ -18,6 +18,7 @@ TEST_PROGS = \ pp_alloc_fail.py \ rss_api.py \ rss_ctx.py \ + rss_flow_label.py \ rss_input_xfrm.py \ tso.py \ xsk_reconfig.py \ diff --git a/tools/testing/selftests/drivers/net/hw/rss_flow_label.py b/tools/testing/selftests/drivers/net/hw/rss_flow_label.py new file mode 100755 index 000000000000..e471e13160ae --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/rss_flow_label.py @@ -0,0 +1,151 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +""" +Tests for RSS hashing on IPv6 Flow Label. +""" + +import glob +import socket +from lib.py import CmdExitFailure +from lib.py import ksft_run, ksft_exit, ksft_eq, ksft_ge, ksft_in, \ + ksft_not_in, ksft_raises, KsftSkipEx +from lib.py import bkg, cmd, defer, fd_read_timeout, rand_port +from lib.py import NetDrvEpEnv + + +def _ethtool_get_cfg(cfg, fl_type): + descr = cmd(f"ethtool -n {cfg.ifname} rx-flow-hash {fl_type}").stdout + + converter = { + "IP SA": "s", + "IP DA": "d", + "L3 proto": "t", + "L4 bytes 0 & 1 [TCP/UDP src port]": "f", + "L4 bytes 2 & 3 [TCP/UDP dst port]": "n", + "IPv6 Flow Label": "l", + } + + ret = "" + for line in descr.split("\n")[1:-2]: + # if this raises we probably need to add more keys to converter above + ret += converter[line] + return ret + + +def _traffic(cfg, one_sock, one_cpu): + local_port = rand_port(socket.SOCK_DGRAM) + remote_port = rand_port(socket.SOCK_DGRAM) + + sock = socket.socket(socket.AF_INET6, socket.SOCK_DGRAM) + sock.bind(("", local_port)) + sock.connect((cfg.remote_addr_v["6"], 0)) + if one_sock: + send = f"exec 5<>/dev/udp/{cfg.addr_v['6']}/{local_port}; " \ + "for i in `seq 20`; do echo a >&5; sleep 0.02; done; exec 5>&-" + else: + send = "for i in `seq 20`; do echo a | socat -t0.02 - UDP6:" \ + f"[{cfg.addr_v['6']}]:{local_port},sourceport={remote_port}; done" + + cpus = set() + with bkg(send, shell=True, host=cfg.remote, exit_wait=True): + for _ in range(20): + fd_read_timeout(sock.fileno(), 1) + cpu = sock.getsockopt(socket.SOL_SOCKET, socket.SO_INCOMING_CPU) + cpus.add(cpu) + + if one_cpu: + ksft_eq(len(cpus), 1, + f"{one_sock=} - expected one CPU, got traffic on: {cpus=}") + else: + ksft_ge(len(cpus), 2, + f"{one_sock=} - expected many CPUs, got traffic on: {cpus=}") + + +def test_rss_flow_label(cfg): + """ + Test hashing on IPv6 flow label. Send traffic over a single socket + and over multiple sockets. Depend on the remote having auto-label + enabled so that it randomizes the label per socket. + """ + + cfg.require_ipver("6") + cfg.require_cmd("socat", remote=True) + if not hasattr(socket, "SO_INCOMING_CPU"): + raise KsftSkipEx("socket.SO_INCOMING_CPU was added in Python 3.11") + + # 1 is the default, if someone changed it we probably shouldn"t mess with it + af = cmd("cat /proc/sys/net/ipv6/auto_flowlabels", host=cfg.remote).stdout + if af.strip() != "1": + raise KsftSkipEx("Remote does not have auto_flowlabels enabled") + + qcnt = len(glob.glob(f"/sys/class/net/{cfg.ifname}/queues/rx-*")) + if qcnt < 2: + raise KsftSkipEx(f"Local has only {qcnt} queues") + + # Enable flow label hashing for UDP6 + initial = _ethtool_get_cfg(cfg, "udp6") + no_lbl = initial.replace("l", "") + if "l" not in initial: + try: + cmd(f"ethtool -N {cfg.ifname} rx-flow-hash udp6 l{no_lbl}") + except CmdExitFailure as exc: + raise KsftSkipEx("Device doesn't support Flow Label for UDP6") from exc + + defer(cmd, f"ethtool -N {cfg.ifname} rx-flow-hash udp6 {initial}") + + _traffic(cfg, one_sock=True, one_cpu=True) + _traffic(cfg, one_sock=False, one_cpu=False) + + # Disable it, we should see no hashing (reset was already defer()ed) + cmd(f"ethtool -N {cfg.ifname} rx-flow-hash udp6 {no_lbl}") + + _traffic(cfg, one_sock=False, one_cpu=True) + + +def _check_v4_flow_types(cfg): + for fl_type in ["tcp4", "udp4", "ah4", "esp4", "sctp4"]: + try: + cur = cmd(f"ethtool -n {cfg.ifname} rx-flow-hash {fl_type}").stdout + ksft_not_in("Flow Label", cur, + comment=f"{fl_type=} has Flow Label:" + cur) + except CmdExitFailure: + # Probably does not support this flow type + pass + + +def test_rss_flow_label_6only(cfg): + """ + Test interactions with IPv4 flow types. It should not be possible to set + IPv6 Flow Label hashing for an IPv4 flow type. The Flow Label should also + not appear in the IPv4 "current config". + """ + + with ksft_raises(CmdExitFailure) as cm: + cmd(f"ethtool -N {cfg.ifname} rx-flow-hash tcp4 sdfnl") + ksft_in("Invalid argument", cm.exception.cmd.stderr) + + _check_v4_flow_types(cfg) + + # Try to enable Flow Labels and check again, in case it leaks thru + initial = _ethtool_get_cfg(cfg, "udp6") + changed = initial.replace("l", "") if "l" in initial else initial + "l" + + cmd(f"ethtool -N {cfg.ifname} rx-flow-hash udp6 {changed}") + restore = defer(cmd, f"ethtool -N {cfg.ifname} rx-flow-hash udp6 {initial}") + + _check_v4_flow_types(cfg) + restore.exec() + _check_v4_flow_types(cfg) + + +def main() -> None: + with NetDrvEpEnv(__file__, nsim_test=False) as cfg: + ksft_run([test_rss_flow_label, + test_rss_flow_label_6only], + args=(cfg, )) + ksft_exit() + + +if __name__ == "__main__": + main() -- 2.50.1

2 months, 2 weeks

2
1
0 0

[PATCH v6] selftests/mm: add process_madvise() tests

by wang lian

Add tests for process_madvise(), focusing on verifying behavior under various conditions including valid usage and error cases. Signed-off-by: wang lian <lianux.mm(a)gmail.com> Suggested-by: Lorenzo Stoakes <lorenzo.stoakes(a)oracle.com> Suggested-by: David Hildenbrand <david(a)redhat.com> Suggested-by: Zi Yan <ziy(a)nvidia.com> Suggested-by: Mark Brown <broonie(a)kernel.org> Acked-by: SeongJae Park <sj(a)kernel.org> --- Changelog v6: - Refactor child process and pidfd management to use the kselftest fixture's setup and teardown mechanism. This ensures that child processes are reliably terminated and file descriptors are closed, even when a test is aborted by an ASSERT or SKIP macro. This resolves the issue where a failed assertion could lead to a leaked child process. Changelog v5: https://lore.kernel.org/lkml/20250714122533.3135-1-lianux.mm@gmail.com/ - Refactor the remote_collapse test to concentrate on its primary goal confirming the successful remote invocation of process_madvise() on a child process. - Split the validation logic for invalid pidfds out of the remote test and into two new (`exited_process_pidfd` and `bad_pidfd`). - Based mm-new branch, can ensure clean application Changelog v4: https://lore.kernel.org/lkml/20250710112249.58722-1-lianux.mm@gmail.com/ - Refine resource cleanup logic in test teardown to be more robust. - Improve remote_collapse test to correctly handle different THP (Transparent Huge Page) policies ('always', 'madvise', 'never'), including handling race conditions with khugepaged. - Resolve build errors Changelog v3: https://lore.kernel.org/lkml/20250703044326.65061-1-lianux.mm@gmail.com/ - Rebased onto the latest mm-stable branch to ensure clean application. - Refactor common signal handling logic into vm_util to reduce code duplication. - Improve test robustness and diagnostics based on community feedback. - Address minor code style and script corrections. Changelog v2: https://lore.kernel.org/lkml/20250630140957.4000-1-lianux.mm@gmail.com/ - Drop MADV_DONTNEED tests based on feedback. - Focus solely on process_madvise() syscall. - Improve error handling and structure. - Add future-proof flag test. - Style and comment cleanups. -V1: https://lore.kernel.org/lkml/20250621133003.4733-1-lianux.mm@gmail.com/ tools/testing/selftests/mm/.gitignore | 1 + tools/testing/selftests/mm/Makefile | 1 + tools/testing/selftests/mm/process_madv.c | 302 ++++++++++++++++++++++ tools/testing/selftests/mm/run_vmtests.sh | 5 + 4 files changed, 309 insertions(+) create mode 100644 tools/testing/selftests/mm/process_madv.c diff --git a/tools/testing/selftests/mm/.gitignore b/tools/testing/selftests/mm/.gitignore index f2dafa0b700b..e7b23a8a05fe --- a/tools/testing/selftests/mm/.gitignore +++ b/tools/testing/selftests/mm/.gitignore @@ -21,6 +21,7 @@ on-fault-limit transhuge-stress pagemap_ioctl pfnmap +process_madv *.tmp* protection_keys protection_keys_32 diff --git a/tools/testing/selftests/mm/Makefile b/tools/testing/selftests/mm/Makefile index ae6f994d3add..d13b3cef2a2b 100644 --- a/tools/testing/selftests/mm/Makefile +++ b/tools/testing/selftests/mm/Makefile @@ -85,6 +85,7 @@ TEST_GEN_FILES += mseal_test TEST_GEN_FILES += on-fault-limit TEST_GEN_FILES += pagemap_ioctl TEST_GEN_FILES += pfnmap +TEST_GEN_FILES += process_madv TEST_GEN_FILES += thuge-gen TEST_GEN_FILES += transhuge-stress TEST_GEN_FILES += uffd-stress diff --git a/tools/testing/selftests/mm/process_madv.c b/tools/testing/selftests/mm/process_madv.c new file mode 100644 index 000000000000..8a83eac3bfab --- /dev/null +++ b/tools/testing/selftests/mm/process_madv.c @@ -0,0 +1,302 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#define _GNU_SOURCE +#include "../kselftest_harness.h" +#include <errno.h> +#include <setjmp.h> +#include <signal.h> +#include <stdbool.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <linux/mman.h> +#include <sys/syscall.h> +#include <unistd.h> +#include <sched.h> +#include "vm_util.h" + +#include "../pidfd/pidfd.h" + +FIXTURE(process_madvise) +{ + unsigned long page_size; + pid_t child_pid; + int remote_pidfd; + int pidfd; +}; + +FIXTURE_SETUP(process_madvise) +{ + self->page_size = (unsigned long)sysconf(_SC_PAGESIZE); + self->pidfd = PIDFD_SELF; + self->remote_pidfd = -1; + self->child_pid = -1; +}; + +FIXTURE_TEARDOWN_PARENT(process_madvise) +{ + /* This teardown is guaranteed to run, even if tests SKIP or ASSERT */ + if (self->child_pid > 0) { + kill(self->child_pid, SIGKILL); + waitpid(self->child_pid, NULL, 0); + } + + if (self->remote_pidfd >= 0) + close(self->remote_pidfd); +} + +static ssize_t sys_process_madvise(int pidfd, const struct iovec *iovec, + size_t vlen, int advice, unsigned int flags) +{ + return syscall(__NR_process_madvise, pidfd, iovec, vlen, advice, flags); +} + +/* + * This test uses PIDFD_SELF to target the current process. The main + * goal is to verify the basic behavior of process_madvise() with + * a vector of non-contiguous memory ranges, not its cross-process + * capabilities. + */ +TEST_F(process_madvise, basic) +{ + const unsigned long pagesize = self->page_size; + const int madvise_pages = 4; + struct iovec vec[madvise_pages]; + int pidfd = self->pidfd; + ssize_t ret; + char *map; + + /* + * Create a single large mapping. We will pick pages from this + * mapping to advise on. This ensures we test non-contiguous iovecs. + */ + map = mmap(NULL, pagesize * 10, PROT_READ | PROT_WRITE, + MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); + if (map == MAP_FAILED) + SKIP(return, "mmap failed, not enough memory.\n"); + + /* Fill the entire region with a known pattern. */ + memset(map, 'A', pagesize * 10); + + /* + * Setup the iovec to point to 4 non-contiguous pages + * within the mapping. + */ + vec[0].iov_base = &map[0 * pagesize]; + vec[0].iov_len = pagesize; + vec[1].iov_base = &map[3 * pagesize]; + vec[1].iov_len = pagesize; + vec[2].iov_base = &map[5 * pagesize]; + vec[2].iov_len = pagesize; + vec[3].iov_base = &map[8 * pagesize]; + vec[3].iov_len = pagesize; + + ret = sys_process_madvise(pidfd, vec, madvise_pages, MADV_DONTNEED, 0); + if (ret == -1 && errno == EPERM) + SKIP(return, + "process_madvise() unsupported or permission denied, try running as root.\n"); + else if (errno == EINVAL) + SKIP(return, + "process_madvise() unsupported or parameter invalid, please check arguments.\n"); + + /* The call should succeed and report the total bytes processed. */ + ASSERT_EQ(ret, madvise_pages * pagesize); + + /* Check that advised pages are now zero. */ + for (int i = 0; i < madvise_pages; i++) { + char *advised_page = (char *)vec[i].iov_base; + + /* Content must be 0, not 'A'. */ + ASSERT_EQ(*advised_page, '\0'); + } + + /* Check that an un-advised page in between is still 'A'. */ + char *unadvised_page = &map[1 * pagesize]; + + for (int i = 0; i < pagesize; i++) + ASSERT_EQ(unadvised_page[i], 'A'); + + /* Cleanup. */ + ASSERT_EQ(munmap(map, pagesize * 10), 0); +} + +/* + * This test deterministically validates process_madvise() with MADV_COLLAPSE + * on a remote process, other advices are difficult to verify reliably. + * + * The test verifies that a memory region in a child process, + * focus on process_madv remote result, only check addresses and lengths. + * The correctness of the MADV_COLLAPSE can be found in the relevant test examples in khugepaged. + */ +TEST_F(process_madvise, remote_collapse) +{ + const unsigned long pagesize = self->page_size; + long huge_page_size; + int pipe_info[2]; + ssize_t ret; + struct iovec vec; + + struct child_info { + pid_t pid; + void *map_addr; + } info; + + huge_page_size = default_huge_page_size(); + if (huge_page_size <= 0) + SKIP(return, "Could not determine a valid huge page size.\n"); + + ASSERT_EQ(pipe(pipe_info), 0); + + self->child_pid = fork(); + ASSERT_NE(self->child_pid, -1); + + if (self->child_pid == 0) { + char *map; + size_t map_size = 2 * huge_page_size; + + close(pipe_info[0]); + + map = mmap(NULL, map_size, PROT_READ | PROT_WRITE, + MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); + ASSERT_NE(map, MAP_FAILED); + + /* Fault in as small pages */ + for (size_t i = 0; i < map_size; i += pagesize) + map[i] = 'A'; + + /* Send info and pause */ + info.pid = getpid(); + info.map_addr = map; + ret = write(pipe_info[1], &info, sizeof(info)); + ASSERT_EQ(ret, sizeof(info)); + close(pipe_info[1]); + + pause(); + exit(0); + } + + close(pipe_info[1]); + + /* Receive child info */ + ret = read(pipe_info[0], &info, sizeof(info)); + if (ret <= 0) { + waitpid(self->child_pid, NULL, 0); + SKIP(return, "Failed to read child info from pipe.\n"); + } + ASSERT_EQ(ret, sizeof(info)); + close(pipe_info[0]); + self->child_pid = info.pid; + + self->remote_pidfd = syscall(__NR_pidfd_open, self->child_pid, 0); + ASSERT_GE(self->remote_pidfd, 0); + + vec.iov_base = info.map_addr; + vec.iov_len = huge_page_size; + + ret = sys_process_madvise(self->remote_pidfd, &vec, 1, MADV_COLLAPSE, 0); + if (ret == -1) { + if (errno == EINVAL) + SKIP(return, "PROCESS_MADV_ADVISE is not supported.\n"); + else if (errno == EPERM) + SKIP(return, + "No process_madvise() permissions, try running as root.\n"); + return; + } + + ASSERT_EQ(ret, huge_page_size); +} + +/* + * Test process_madvise() with a pidfd for a process that has already + * exited to ensure correct error handling. + */ +TEST_F(process_madvise, exited_process_pidfd) +{ + struct iovec vec; + ssize_t ret; + int pidfd; + + vec.iov_base = (void *)0x1234; + vec.iov_len = 4096; + + /* + * Using a pidfd for a process that has already exited should fail + * with ESRCH. + */ + self->child_pid = fork(); + ASSERT_NE(self->child_pid, -1); + + if (self->child_pid == 0) + exit(0); + + pidfd = syscall(__NR_pidfd_open, self->child_pid, 0); + ASSERT_GE(pidfd, 0); + + /* Wait for the child to ensure it has terminated. */ + waitpid(self->child_pid, NULL, 0); + + ret = sys_process_madvise(pidfd, &vec, 1, MADV_DONTNEED, 0); + ASSERT_EQ(ret, -1); + ASSERT_EQ(errno, ESRCH); + close(pidfd); +} + +/* + * Test process_madvise() with bad pidfds to ensure correct error + * handling. + */ +TEST_F(process_madvise, bad_pidfd) +{ + struct iovec vec; + ssize_t ret; + + vec.iov_base = (void *)0x1234; + vec.iov_len = 4096; + + /* Using an invalid fd number (-1) should fail with EBADF. */ + ret = sys_process_madvise(-1, &vec, 1, MADV_DONTNEED, 0); + ASSERT_EQ(ret, -1); + ASSERT_EQ(errno, EBADF); + + /* + * Using a valid fd that is not a pidfd (e.g. stdin) should fail + * with EBADF. + */ + ret = sys_process_madvise(STDIN_FILENO, &vec, 1, MADV_DONTNEED, 0); + ASSERT_EQ(ret, -1); + ASSERT_EQ(errno, EBADF); +} + +/* + * Test process_madvise() with an invalid flag value. Currently, only a flag + * value of 0 is supported. This test is reserved for the future, e.g., if + * synchronous flags are added. + */ +TEST_F(process_madvise, flag) +{ + const unsigned long pagesize = self->page_size; + unsigned int invalid_flag; + int pidfd = self->pidfd; + struct iovec vec; + char *map; + ssize_t ret; + + map = mmap(NULL, pagesize, PROT_READ, MAP_PRIVATE | MAP_ANONYMOUS, -1, + 0); + if (map == MAP_FAILED) + SKIP(return, "mmap failed, not enough memory.\n"); + + vec.iov_base = map; + vec.iov_len = pagesize; + + invalid_flag = 0x80000000; + + ret = sys_process_madvise(pidfd, &vec, 1, MADV_DONTNEED, invalid_flag); + ASSERT_EQ(ret, -1); + ASSERT_EQ(errno, EINVAL); + + /* Cleanup. */ + ASSERT_EQ(munmap(map, pagesize), 0); +} + +TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/mm/run_vmtests.sh b/tools/testing/selftests/mm/run_vmtests.sh index a38c984103ce..471e539d82b8 100755 --- a/tools/testing/selftests/mm/run_vmtests.sh +++ b/tools/testing/selftests/mm/run_vmtests.sh @@ -65,6 +65,8 @@ separated by spaces: test pagemap_scan IOCTL - pfnmap tests for VM_PFNMAP handling +- process_madv + test for process_madv - cow test copy-on-write semantics - thp @@ -425,6 +427,9 @@ CATEGORY="madv_guard" run_test ./guard-regions # MADV_POPULATE_READ and MADV_POPULATE_WRITE tests CATEGORY="madv_populate" run_test ./madv_populate +# PROCESS_MADV test +CATEGORY="process_madv" run_test ./process_madv + CATEGORY="vma_merge" run_test ./merge if [ -x ./memfd_secret ] -- 2.43.0

2 months, 2 weeks

2
2
0 0

[PATCH net 1/2] macsec: set IFF_UNICAST_FLT priv flag

by Stanislav Fomichev

Cosmin reports the following locking issue: # BUG: sleeping function called from invalid context at kernel/locking/mutex.c:275 # dump_stack_lvl+0x4f/0x60 # __might_resched+0xeb/0x140 # mutex_lock+0x1a/0x40 # dev_set_promiscuity+0x26/0x90 # __dev_set_promiscuity+0x85/0x170 # __dev_set_rx_mode+0x69/0xa0 # dev_uc_add+0x6d/0x80 # vlan_dev_open+0x5f/0x120 [8021q] # __dev_open+0x10c/0x2a0 # __dev_change_flags+0x1a4/0x210 # netif_change_flags+0x22/0x60 # do_setlink.isra.0+0xdb0/0x10f0 # rtnl_newlink+0x797/0xb00 # rtnetlink_rcv_msg+0x1cb/0x3f0 # netlink_rcv_skb+0x53/0x100 # netlink_unicast+0x273/0x3b0 # netlink_sendmsg+0x1f2/0x430 Which is similar to recent syzkaller reports in [0] and [1] and triggers because macsec does not advertise IFF_UNICAST_FLT although it has proper ndo_set_rx_mode callback that takes care of pushing uc/mc addresses down to the real device. In general, dev_uc_add call path is problematic for stacking non-IFF_UNICAST_FLT because we might grab netdev instance lock under addr_list_lock spinlock, so this is not a systemic fix. 0: https://lore.kernel.org/netdev/686d55b4.050a0220.1ffab7.0014.GAE@google.com 1: https://lore.kernel.org/netdev/68712acf.a00a0220.26a83e.0051.GAE@google.com/ Link: 2aff4342b0f5b1539c02ffd8df4c7e58dd9746e7.camel(a)nvidia.com Fixes: 7e4d784f5810 ("net: hold netdev instance lock during rtnetlink operations") Reported-by: Cosmin Ratiu <cratiu(a)nvidia.com> Tested-by: Cosmin Ratiu <cratiu(a)nvidia.com> Signed-off-by: Stanislav Fomichev <sdf(a)fomichev.me> --- drivers/net/macsec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 7edbe76b5455..4c75d1fea552 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -3868,7 +3868,7 @@ static void macsec_setup(struct net_device *dev) ether_setup(dev); dev->min_mtu = 0; dev->max_mtu = ETH_MAX_MTU; - dev->priv_flags |= IFF_NO_QUEUE; + dev->priv_flags |= IFF_NO_QUEUE | IFF_UNICAST_FLT; dev->netdev_ops = &macsec_netdev_ops; dev->needs_free_netdev = true; dev->priv_destructor = macsec_free_netdev; -- 2.50.1

2 months, 2 weeks

3
4
0 0

[PATCH v2 0/7] Replace "__auto_type" with "auto"

by H. Peter Anvin

"auto" was defined as a keyword back in the K&R days, but as a storage type specifier. No one ever used it, since it was and is the default storage type for local variables. C++11 recycled the keyword to allow a type to be declared based on the type of an initializer. This was finally adopted into standard C in C23. gcc and clang provide the "__auto_type" alias keyword as an extension for pre-C23, however, there is no reason to pollute the bulk of the source base with this temporary keyword; instead define "auto" as a macro unless the compiler is running in C23+ mode. This macro is added in <linux/compiler_types.h> because that header is included in some of the tools headers, wheres <linux/compiler.h> is not as it has a bunch of very kernel-specific things in it. Changes in v2: - Restore indentation of macro backslashes (David Laight) - arch/nios2: Replace an adjacent typeof() with a similar "auto" construct (Linus Torvalds) - fs/proc/inode.c: change "__auto_type" to "const auto" (Alexey Dobriyan) --- arch/nios2/include/asm/uaccess.h | 8 ++++---- arch/x86/include/asm/bug.h | 2 +- arch/x86/include/asm/string_64.h | 6 +++--- arch/x86/include/asm/uaccess_64.h | 2 +- fs/proc/inode.c | 16 ++++++++-------- include/linux/cleanup.h | 6 +++--- include/linux/compiler.h | 2 +- include/linux/compiler_types.h | 13 +++++++++++++ include/linux/minmax.h | 6 +++--- tools/testing/selftests/bpf/prog_tests/socket_helpers.h | 9 +++++++-- tools/virtio/linux/compiler.h | 2 +- 11 files changed, 45 insertions(+), 27 deletions(-)

2 months, 2 weeks

5
12
0 0

[PATCH] kselftest/arm64: Test FPSIMD format data writes via NT_ARM_SVE in fp-ptrace

by Mark Brown

The NT_ARM_SVE register set supports two data formats, the native SVE one and an alternative format where we embed a copy of user_fpsimd_data as used for NT_PRFPREG in the SVE register set. The register data is set as for a write to NT_PRFPREG and changes in vector length and streaming mode are handled as for any NT_ARM_SVE write. This has not previously been tested by fp-ptrace, add coverage of it. We do not support writes in FPSIMD format for NT_ARM_SSVE so we skip the test for anything that would leave us in streaming mode. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- tools/testing/selftests/arm64/fp/fp-ptrace.c | 66 +++++++++++++++++++++++++++- 1 file changed, 64 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/arm64/fp/fp-ptrace.c b/tools/testing/selftests/arm64/fp/fp-ptrace.c index 191c47ca0ed8..c479c97dea1a 100644 --- a/tools/testing/selftests/arm64/fp/fp-ptrace.c +++ b/tools/testing/selftests/arm64/fp/fp-ptrace.c @@ -1066,6 +1066,23 @@ static bool sve_write_supported(struct test_config *config) return true; } +static bool sve_write_fpsimd_supported(struct test_config *config) +{ + if (!sve_supported()) + return false; + + if ((config->svcr_in & SVCR_ZA) != (config->svcr_expected & SVCR_ZA)) + return false; + + if (config->svcr_expected & SVCR_SM) + return false; + + if (config->sme_vl_in != config->sme_vl_expected) + return false; + + return true; +} + static void fpsimd_write_expected(struct test_config *config) { int vl; @@ -1152,7 +1169,7 @@ static void sve_write_expected(struct test_config *config) } } -static void sve_write(pid_t child, struct test_config *config) +static void sve_write_sve(pid_t child, struct test_config *config) { struct user_sve_header *sve; struct iovec iov; @@ -1195,6 +1212,45 @@ static void sve_write(pid_t child, struct test_config *config) free(iov.iov_base); } +static void sve_write_fpsimd(pid_t child, struct test_config *config) +{ + struct user_sve_header *sve; + struct user_fpsimd_state *fpsimd; + struct iovec iov; + int ret, vl, vq; + + vl = vl_expected(config); + vq = __sve_vq_from_vl(vl); + + if (!vl) + return; + + iov.iov_len = SVE_PT_SVE_OFFSET + SVE_PT_SVE_SIZE(vq, + SVE_PT_REGS_FPSIMD); + iov.iov_base = malloc(iov.iov_len); + if (!iov.iov_base) { + ksft_print_msg("Failed allocating %lu byte SVE write buffer\n", + iov.iov_len); + return; + } + memset(iov.iov_base, 0, iov.iov_len); + + sve = iov.iov_base; + sve->size = iov.iov_len; + sve->flags = SVE_PT_REGS_FPSIMD; + sve->vl = vl; + + fpsimd = iov.iov_base + SVE_PT_REGS_OFFSET; + memcpy(&fpsimd->vregs, v_expected, sizeof(v_expected)); + + ret = ptrace(PTRACE_SETREGSET, child, NT_ARM_SVE, &iov); + if (ret != 0) + ksft_print_msg("Failed to write SVE: %s (%d)\n", + strerror(errno), errno); + + free(iov.iov_base); +} + static bool za_write_supported(struct test_config *config) { if ((config->svcr_in & SVCR_SM) != (config->svcr_expected & SVCR_SM)) @@ -1386,7 +1442,13 @@ static struct test_definition sve_test_defs[] = { .name = "SVE write", .supported = sve_write_supported, .set_expected_values = sve_write_expected, - .modify_values = sve_write, + .modify_values = sve_write_sve, + }, + { + .name = "SVE write FPSIMD format", + .supported = sve_write_fpsimd_supported, + .set_expected_values = fpsimd_write_expected, + .modify_values = sve_write_fpsimd, }, }; --- base-commit: 86731a2a651e58953fc949573895f2fa6d456841 change-id: 20250718-arm64-fp-ptrace-sve-fpsimd-ea20bdd9138b Best regards, -- Mark Brown <broonie(a)kernel.org>

2 months, 2 weeks

2
1
0 0

[PATCH] kselftest/arm64: Allow sve-ptrace to run on SME only systems

by Mark Brown

Currently the sve-ptrace test program only runs if the system supports SVE but since SME includes streaming SVE the tests it offers are valid even on a system that only supports SME. Since the tests already have individual hwcap checks just remove the top level test and rely on those. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- tools/testing/selftests/arm64/fp/sve-ptrace.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/tools/testing/selftests/arm64/fp/sve-ptrace.c b/tools/testing/selftests/arm64/fp/sve-ptrace.c index 7f9b6a61d369..b22303778fb0 100644 --- a/tools/testing/selftests/arm64/fp/sve-ptrace.c +++ b/tools/testing/selftests/arm64/fp/sve-ptrace.c @@ -753,9 +753,6 @@ int main(void) ksft_print_header(); ksft_set_plan(EXPECTED_TESTS); - if (!(getauxval(AT_HWCAP) & HWCAP_SVE)) - ksft_exit_skip("SVE not available\n"); - child = fork(); if (!child) return do_child(); --- base-commit: 9e8ebfe677f9101bbfe1f75d548a5aec581e8213 change-id: 20250718-arm64-sve-ptrace-sme-only-4ab49d037295 Best regards, -- Mark Brown <broonie(a)kernel.org>

2 months, 2 weeks

2
1
0 0

[PATCH 0/3] kselftest/arm64: Fixes for fp-ptrace on SME only systems

by Mark Brown

When testing SME only systems I noticed that fp-ptrace does not cope at all well with them, this series fixes the major issues so that the test program completes successfully. The reason I was looking at this is that following the recent round of fixes to ptrace we do not currently offer any mechanism for disabling streaming mode via ptrace, this series brings the program to a point where it tests the currently implemented ABI. A further series allowing the disabling of streaming mode via ptrace will follow. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Mark Brown (3): kselftest/arm64: Test SME on SME only systems in fp-ptrace kselftest/arm64: Fix SVE write data generation for SME only systems kselftest/arm64: Handle attempts to disable SM on SME only systems tools/testing/selftests/arm64/fp/fp-ptrace.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) --- base-commit: 86731a2a651e58953fc949573895f2fa6d456841 change-id: 20250718-arm64-fp-ptrace-sme-only-ab327d7f0d32 Best regards, -- Mark Brown <broonie(a)kernel.org>

2 months, 2 weeks

2
4
0 0

[PATCH v25 net-next 0/6] DUALPI2 patch

by chia-yu.chang＠nokia-bell-labs.com

From: Chia-Yu Chang <chia-yu.chang(a)nokia-bell-labs.com> Hello, Please find the DualPI2 patch v25. This patch serise adds DualPI Improved with a Square (DualPI2) with following features: * Supports congestion controls that comply with the Prague requirements in RFC9331 (e.g. TCP-Prague) * Coupled dual-queue that separates the L4S traffic in a low latency queue (L-queue), without harming remaining traffic that is scheduled in classic queue (C-queue) due to congestion-coupling using PI2 as defined in RFC9332 * Configurable overload strategies * Use of sojourn time to reliably estimate queue delay * Supports ECN L4S-identifier (IP.ECN==0b*1) to classify traffic into respective queues For more details of DualPI2, please refer IETF RFC9332 (https://datatracker.ietf.org/doc/html/rfc9332). Best regards, Chia-Yu --- v25 (19-Jul-2025) - Fix the missing sch_tree_unlock() in v24 (Jakub Kicinski <kuba(a)kernel.org>) v24 (18-Jul-2025) - Replace TCA_DUALPI2 prefix with TC_DUALPI2 for enums in pkt_sched.h (Jakub Kicinski <kuba(a)kernel.org>) - Report error if both packet and time step thresholds are provided (Jakub Kicinski <kuba(a)kernel.org>) v23 (13-Jul-2025) and v22 (11-Jul-2025) - Fix issue when user would like to change DualPI2 but provides an empty TCA_OPTIONS with no nested attributes (Paolo Abeni <pabeni(a)redhat.com>, Jakub Kicinski <kuba(a)kernel.org>) v21 (02-Jul-2025) - Replace STEP_THRESH and STEP_PACKETS with STEP_THRESH_PKTS and STEP_THRESH_US (Jakub Kicinski <kuba(a)kernel.org>) - Move READ_ONCE and WRITE_ONCE to later DualPI2 patches (Jakub Kicinski <kuba(a)kernel.org>) - Replace NLA_POLICY_FULL_RANGE with NLA_POLICY_RANGE (Jakub Kicinski <kuba(a)kernel.org>) - Set extra error message for dualpi2_change (Jakub Kicinski <kuba(a)kernel.org>) - Drop redundant else for better readability (Paolo Abeni <pabeni(a)redhat.com>) - Replace step-thresh and step-packets with step-thresh-pkts and step-thresh-us (Jakub Kicinski <kuba(a)kernel.org>) - Remove redundant name-prefix and simplify entries of dualpi2 enums (Jakub Kicinski <kuba(a)kernel.org>) - Fix some typos and format issues of dualpi2 attributes v20 (21-Jun-2025) - Add one more commit to fix warning and style check on tdc.sh reported by shellcheck - Remove double-prefixed of "tc_tc_dualpi2_attrs" in tc-user.h (Donald Hunter <donald.hunter(a)gmail.com>) v19 (14-Jun-2025) - Fix one typo in the comment of #1 (ALOK TIWARI <alok.a.tiwari(a)oracle.com>) - Update commit message of #4 (ALOK TIWARI <alok.a.tiwari(a)oracle.com>) - Wrap long lines of Documentation/netlink/specs/tc.yaml to within 80 characters (Jakub Kicinski <kuba(a)kernel.org>) v18 (13-Jun-2025) - Add the num of enum used by DualPI2 and fix name and name-prefix of DualPI2 enum and attribute - Replace from_timer() with timer_container_of() (Pedro Tammela <pctammela(a)mojatatu.com>) v17 (25-May-2025, Resent at 11-Jun-2025) - Replace 0xffffffff with U32_MAX (Paolo Abeni <pabeni(a)redhat.com>) - Use helper function qdisc_dequeue_internal() and add new helper function skb_apply_step() (Paolo Abeni <pabeni(a)redhat.com>) - Add s64 casting when calculating the delta of the PI controller (Paolo Abeni <pabeni(a)redhat.com>) - Change the drop reason into SKB_DROP_REASON_QDISC_CONGESTED for drop_early (Paolo Abeni <pabeni(a)redhat.com>) - Modify the condition to remove the original skb when enqueuing multiple GSO segments (Paolo Abeni <pabeni(a)redhat.com>) - Add READ_ONCE() in dualpi2_dump_stat() (Paolo Abeni <pabeni(a)redhat.com>) - Add comments, brackets, and brackets for readability (Paolo Abeni <pabeni(a)redhat.com>) v16 (16-MAy-2025) - Add qdisc_lock() to dualpi2_timer() in dualpi2_timer (Paolo Abeni <pabeni(a)redhat.com>) - Introduce convert_ns_to_usec() to convert usec to nsec without overflow in #1 (Paolo Abeni <pabeni(a)redhat.com>) - Update convert_us_tonsec() to convert nsec to usec without overflow in #2 (Paolo Abeni <pabeni(a)redhat.com>) - Add more descriptions with respect to DualPI2 in the cover ltter and add changelog in each patch (Paolo Abeni <pabeni(a)redhat.com>) v15 (09-May-2025) - Add enum of TCA_DUALPI2_ECN_MASK_CLA_ECT to remove potential leakeage in #1 (Simon Horman <horms(a)kernel.org>) - Fix one typo in comment of #2 - Update tc.yaml in #5 to aligh with the updated enum of pkt_sched.h v14 (05-May-2025) - Modify tc.yaml: (1) Replace flags with enum and remove enum-as-flags, (2) Remove credit-queue in xstats, and (3) Change attribute types (Donald Hunter <donald.hun - Add enum and fix the ordering of variables in pkt_sched.h to align with the modified tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Add validators for DROP_OVERLOAD, DROP_EARLY, ECN_MASK, and SPLIT_GSO in sch_dualpi2.c (Donald Hunter <donald.hunter(a)gmail.com>) - Update dualpi2.json to align with the updated variable order in pkt_sched.h - Reorder patches (Donald Hunter <donald.hunter(a)gmail.com>) v13 (26-Apr-2025) - Use dashes in member names to follow YNL conventions in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Define enumerations separately for flags of drop-early, drop-overload, ecn-mask, credit-queue in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Change the types of split-gso and step-packets into flag in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Revert to u32/u8 types for tc-dualpi2-xstats members in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Add new test cases in tc-tests/qdiscs/dualpi2.json to cover all dualpi2 parameters (Donald Hunter <donald.hunter(a)gmail.com>) - Change the type of TCA_DUALPI2_STEP_PACKETS into NLA_FLAG (Donald Hunter <donald.hunter(a)gmail.com>) v12 (22-Apr-2025) - Remove anonymous struct in sch_dualpi2.c (Paolo Abeni <pabeni(a)redhat.com>) - Replace u32/u8 with uint and s32 with int in tc spec document (Paolo Abeni <pabeni(a)redhat.com>) - Introduce get_memory_limit function to handle potential overflow when multipling limit with MTU (Paolo Abeni <pabeni(a)redhat.com>) - Double the packet length to further include packet overhead in memory_limit (Paolo Abeni <pabeni(a)redhat.com>) - Remove the check of qdisc_qlen(sch) when calling qdisc_tree_reduce_backlog (Paolo Abeni <pabeni(a)redhat.com>) v11 (15-Apr-2025) - Replace hstimer_init with hstimer_setup in sch_dualpi2.c v10 (25-Mar-2025) - Remove leftover include in include/linux/netdevice.h and anonymous struct in sch_dualpi2.c (Paolo Abeni <pabeni(a)redhat.com>) - Use kfree_skb_reason() and add SKB_DROP_REASON_DUALPI2_STEP_DROP drop reason (Paolo Abeni <pabeni(a)redhat.com>) - Split sch_dualpi2.c into 3 patches (and overall 5 patches): Struct definition & parsing, Dump stats & configuration, Enqueue/Dequeue (Paolo Abeni <pabeni(a)redhat.com>) v9 (16-Mar-2025) - Fix mem_usage error in previous version - Add min_qlen_step to the dualpi2 attribute as the minimum queue length in number of packets in the L-queue to start step threshold marking. In previous versions, this value was fixed to 2, so the step threshold was applied to mark packets in the L queue only when the queue length of the L queue was greater than or equal to 2 packets. This will cause larger queuing delays for L4S traffic at low rates (<20Mbps). So we parameterize it and change the default value to 0. Comparison of tcp_1down run 'HTB 20Mbit + DUALPI2 + 10ms base delay' Old versions: avg median # data pts Ping (ms) ICMP : 11.55 11.70 ms 350 TCP upload avg : 18.96 N/A Mbits/s 350 TCP upload sum : 18.96 N/A Mbits/s 350 New version (v9): avg median # data pts Ping (ms) ICMP : 10.81 10.70 ms 350 TCP upload avg : 18.91 N/A Mbits/s 350 TCP upload sum : 18.91 N/A Mbits/s 350 Comparison of tcp_1down run 'HTB 10Mbit + DUALPI2 + 10ms base delay' Old versions: avg median # data pts Ping (ms) ICMP : 12.61 12.80 ms 350 TCP upload avg : 9.48 N/A Mbits/s 350 TCP upload sum : 9.48 N/A Mbits/s 350 New version (v9): avg median # data pts Ping (ms) ICMP : 11.06 10.80 ms 350 TCP upload avg : 9.43 N/A Mbits/s 350 TCP upload sum : 9.43 N/A Mbits/s 350 Comparison of tcp_1down run 'HTB 10Mbit + DUALPI2 + 10ms base delay' Old versions: avg median # data pts Ping (ms) ICMP : 40.86 37.45 ms 350 TCP upload avg : 0.88 N/A Mbits/s 350 TCP upload sum : 0.88 N/A Mbits/s 350 TCP upload::1 : 0.88 0.97 Mbits/s 350 New version (v9): avg median # data pts Ping (ms) ICMP : 11.07 10.40 ms 350 TCP upload avg : 0.55 N/A Mbits/s 350 TCP upload sum : 0.55 N/A Mbits/s 350 TCP upload::1 : 0.55 0.59 Mbits/s 350 v8 (11-Mar-2025) - Fix warning messages in v7 v7 (07-Mar-2025) - Separate into 3 patches to avoid mixing changes of documentation, selftest, and code. (Cong Wang <xiyou.wangcong(a)gmail.com>) v6 (04-Mar-2025) - Add modprobe for dulapi2 in tc-testing script tc-testing/tdc.sh (Jakub Kicinski <kuba(a)kernel.org>) - Update test cases in dualpi2.json - Update commit message v5 (22-Feb-2025) - A comparison was done between MQ + DUALPI2, MQ + FQ_PIE, MQ + FQ_CODEL: Unshaped 1gigE with 4 download streams test: - Summary of tcp_4down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 1.19 1.34 ms 349 TCP download avg : 235.42 N/A Mbits/s 349 TCP download sum : 941.68 N/A Mbits/s 349 TCP download::1 : 235.19 235.39 Mbits/s 349 TCP download::2 : 235.03 235.35 Mbits/s 349 TCP download::3 : 236.89 235.44 Mbits/s 349 TCP download::4 : 234.57 235.19 Mbits/s 349 - Summary of tcp_4down run 'MQ + FQ_PIE' avg median # data pts Ping (ms) ICMP : 1.21 1.37 ms 350 TCP download avg : 235.42 N/A Mbits/s 350 TCP download sum : 941.61 N/A Mbits/s 350 TCP download::1 : 232.54 233.13 Mbits/s 350 TCP download::2 : 232.52 232.80 Mbits/s 350 TCP download::3 : 233.14 233.78 Mbits/s 350 TCP download::4 : 243.41 241.48 Mbits/s 350 - Summary of tcp_4down run 'MQ + DUALPI2' avg median # data pts Ping (ms) ICMP : 1.19 1.34 ms 349 TCP download avg : 235.42 N/A Mbits/s 349 TCP download sum : 941.68 N/A Mbits/s 349 TCP download::1 : 235.19 235.39 Mbits/s 349 TCP download::2 : 235.03 235.35 Mbits/s 349 TCP download::3 : 236.89 235.44 Mbits/s 349 TCP download::4 : 234.57 235.19 Mbits/s 349 Unshaped 1gigE with 128 download streams test: - Summary of tcp_128down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 1.88 1.86 ms 350 TCP download avg : 7.39 N/A Mbits/s 350 TCP download sum : 946.47 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + FQ_PIE': avg median # data pts Ping (ms) ICMP : 1.88 1.86 ms 350 TCP download avg : 7.39 N/A Mbits/s 350 TCP download sum : 946.47 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + DUALPI2': avg median # data pts Ping (ms) ICMP : 1.88 1.86 ms 350 TCP download avg : 7.39 N/A Mbits/s 350 TCP download sum : 946.47 N/A Mbits/s 350 Unshaped 10gigE with 4 download streams test: - Summary of tcp_4down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 0.22 0.23 ms 350 TCP download avg : 2354.08 N/A Mbits/s 350 TCP download sum : 9416.31 N/A Mbits/s 350 TCP download::1 : 2353.65 2352.81 Mbits/s 350 TCP download::2 : 2354.54 2354.21 Mbits/s 350 TCP download::3 : 2353.56 2353.78 Mbits/s 350 TCP download::4 : 2354.56 2354.45 Mbits/s 350 - Summary of tcp_4down run 'MQ + FQ_PIE': avg median # data pts Ping (ms) ICMP : 0.20 0.19 ms 350 TCP download avg : 2354.76 N/A Mbits/s 350 TCP download sum : 9419.04 N/A Mbits/s 350 TCP download::1 : 2354.77 2353.89 Mbits/s 350 TCP download::2 : 2353.41 2354.29 Mbits/s 350 TCP download::3 : 2356.18 2354.19 Mbits/s 350 TCP download::4 : 2354.68 2353.15 Mbits/s 350 - Summary of tcp_4down run 'MQ + DUALPI2': avg median # data pts Ping (ms) ICMP : 0.24 0.24 ms 350 TCP download avg : 2354.11 N/A Mbits/s 350 TCP download sum : 9416.43 N/A Mbits/s 350 TCP download::1 : 2354.75 2353.93 Mbits/s 350 TCP download::2 : 2353.15 2353.75 Mbits/s 350 TCP download::3 : 2353.49 2353.72 Mbits/s 350 TCP download::4 : 2355.04 2353.73 Mbits/s 350 Unshaped 10gigE with 128 download streams test: - Summary of tcp_128down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 7.57 8.69 ms 350 TCP download avg : 73.97 N/A Mbits/s 350 TCP download sum : 9467.82 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + FQ_PIE': avg median # data pts Ping (ms) ICMP : 7.82 8.91 ms 350 TCP download avg : 73.97 N/A Mbits/s 350 TCP download sum : 9468.42 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + DUALPI2': avg median # data pts Ping (ms) ICMP : 6.87 7.93 ms 350 TCP download avg : 73.95 N/A Mbits/s 350 TCP download sum : 9465.87 N/A Mbits/s 350 From the results shown above, we see small differences between combinations. - Update commit message to include results of no_split_gso and split_gso (Dave Taht <dave.taht(a)gmail.com> and Paolo Abeni <pabeni(a)redhat.com>) - Add memlimit in the dualpi2 attribute, and add memory_used, max_memory_used, memory_limit in dualpi2 stats (Dave Taht <dave.taht(a)gmail.com>) - Update note in sch_dualpi2.c related to BBRv3 status (Dave Taht <dave.taht(a)gmail.com>) - Update license identifier (Dave Taht <dave.taht(a)gmail.com>) - Add selftest in tools/testing/selftests/tc-testing (Cong Wang <xiyou.wangcong(a)gmail.com>) - Use netlink policies for parameter checks (Jamal Hadi Salim <jhs(a)mojatatu.com>) - Modify texts & fix typos in Documentation/netlink/specs/tc.yaml (Dave Taht <dave.taht(a)gmail.com>) - Add descriptions of packet counter statistics and the reset function of sch_dualpi2.c - Fix step_thresh in packets - Update code comments in sch_dualpi2.c v4 (22-Oct-2024) - Update statement in Kconfig for DualPI2 (Stephen Hemminger <stephen(a)networkplumber.org>) - Put a blank line after #define in sch_dualpi2.c (Stephen Hemminger <stephen(a)networkplumber.org>) - Fix line length warning. v3 (19-Oct-2024) - Fix compilaiton error - Update Documentation/netlink/specs/tc.yaml (Jakub Kicinski <kuba(a)kernel.org>) v2 (18-Oct-2024) - Add Documentation/netlink/specs/tc.yaml (Jakub Kicinski <kuba(a)kernel.org>) - Use dualpi2 instead of skb prefix (Jamal Hadi Salim <jhs(a)mojatatu.com>) - Replace nla_parse_nested_deprecated with nla_parse_nested (Jamal Hadi Salim <jhs(a)mojatatu.com>) - Fix line length warning --- Chia-Yu Chang (5): sched: Struct definition and parsing of dualpi2 qdisc sched: Dump configuration and statistics of dualpi2 qdisc selftests/tc-testing: Fix warning and style check on tdc.sh selftests/tc-testing: Add selftests for qdisc DualPI2 Documentation: netlink: specs: tc: Add DualPI2 specification Koen De Schepper (1): sched: Add enqueue/dequeue of dualpi2 qdisc Documentation/netlink/specs/tc.yaml | 151 ++- include/net/dropreason-core.h | 6 + include/uapi/linux/pkt_sched.h | 68 + net/sched/Kconfig | 12 + net/sched/Makefile | 1 + net/sched/sch_dualpi2.c | 1177 +++++++++++++++++ tools/testing/selftests/tc-testing/config | 1 + .../tc-testing/tc-tests/qdiscs/dualpi2.json | 254 ++++ tools/testing/selftests/tc-testing/tdc.sh | 6 +- 9 files changed, 1671 insertions(+), 5 deletions(-) create mode 100644 net/sched/sch_dualpi2.c create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/dualpi2.json -- 2.34.1

2 months, 2 weeks

3
8
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror July 2025