June 2025 - Linux-kselftest-mirror

[kvm-unit-tests PATCH v2] riscv: Allow SBI_CONSOLE with no uart in device tree

by Jesse Taube

When CONFIG_SBI_CONSOLE is enabled and there is no uart defined in the device tree kvm-unit-tests fails to start. Only abort when uart is not found in device tree if SBI_CONSOLE is false Signed-off-by: Jesse Taube <jesse(a)rivosinc.com> --- lib/riscv/io.c | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-) diff --git a/lib/riscv/io.c b/lib/riscv/io.c index fb40adb7..e64e9253 100644 --- a/lib/riscv/io.c +++ b/lib/riscv/io.c @@ -30,7 +30,6 @@ static u32 uart0_reg_width = 1; static u32 uart0_reg_shift; static struct spinlock uart_lock; -#ifndef CONFIG_SBI_CONSOLE static u32 uart0_read(u32 num) { u32 offset = num << uart0_reg_shift; @@ -54,7 +53,6 @@ static void uart0_write(u32 num, u32 val) else writel(val, uart0_base + offset); } -#endif static void uart0_init_fdt(void) { @@ -73,11 +71,16 @@ static void uart0_init_fdt(void) break; } +#ifdef CONFIG_SBI_CONSOLE + uart0_base = NULL; + return; +#else if (ret) { printf("%s: Compatible uart not found in the device tree, aborting...\n", __func__); abort(); } +#endif } else { const fdt32_t *val; int len; @@ -116,8 +119,8 @@ void io_init(void) } } -#ifdef CONFIG_SBI_CONSOLE -void puts(const char *s) +void sbi_puts(const char *s); +void sbi_puts(const char *s) { phys_addr_t addr = virt_to_phys((void *)s); unsigned long hi = upper_32_bits(addr); @@ -127,9 +130,11 @@ void puts(const char *s) sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE, strlen(s), lo, hi, 0, 0, 0); spin_unlock(&uart_lock); } -#else -void puts(const char *s) + +void uart0_puts(const char *s); +void uart0_puts(const char *s) { + assert(uart0_base); spin_lock(&uart_lock); while (*s) { while (!(uart0_read(UART_LSR_OFFSET) & UART_LSR_THRE)) @@ -138,7 +143,15 @@ void puts(const char *s) } spin_unlock(&uart_lock); } + +void puts(const char *s) +{ +#ifdef CONFIG_SBI_CONSOLE + sbi_puts(s); +#else + uart0_puts(s); #endif +} /* * Defining halt to take 'code' as an argument guarantees that it will -- 2.43.0

1 week, 3 days

2
1
0 0

[kvm-unit-tests PATCH v5] riscv: sbi: Add SBI Debug Triggers Extension tests

by Jesse Taube

Add tests for the DBTR SBI extension. Signed-off-by: Jesse Taube <jesse(a)rivosinc.com> Reviewed-by: Charlie Jenkins <charlie(a)rivosinc.com> Tested-by: Charlie Jenkins <charlie(a)rivosinc.com> --- V1 -> V2: - Call report_prefix_pop before returning - Disable compressed instructions in exec_call, update related comment - Remove extra "| 1" in dbtr_test_load - Remove extra newlines - Remove extra tabs in check_exec - Remove typedefs from enums - Return when dbtr_install_trigger fails - s/avalible/available/g - s/unistall/uninstall/g V2 -> V3: - Change SBI_DBTR_SHMEM_INVALID_ADDR to -1UL - Move all dbtr functions to sbi-dbtr.c - Move INSN_LEN to processor.h - Update include list - Use C-style comments V3 -> V4: - Include libcflat.h - Remove #define SBI_DBTR_SHMEM_INVALID_ADDR V4 -> V5: - Sort includes - Add kfail for update triggers --- lib/riscv/asm/sbi.h | 1 + riscv/Makefile | 1 + riscv/sbi-dbtr.c | 824 ++++++++++++++++++++++++++++++++++++++++++++ riscv/sbi-tests.h | 1 + riscv/sbi.c | 1 + 5 files changed, 828 insertions(+) create mode 100644 riscv/sbi-dbtr.c diff --git a/lib/riscv/asm/sbi.h b/lib/riscv/asm/sbi.h index a5738a5c..78fd6e2a 100644 --- a/lib/riscv/asm/sbi.h +++ b/lib/riscv/asm/sbi.h @@ -51,6 +51,7 @@ enum sbi_ext_id { SBI_EXT_SUSP = 0x53555350, SBI_EXT_FWFT = 0x46574654, SBI_EXT_SSE = 0x535345, + SBI_EXT_DBTR = 0x44425452, }; enum sbi_ext_base_fid { diff --git a/riscv/Makefile b/riscv/Makefile index 11e68eae..55c7ac93 100644 --- a/riscv/Makefile +++ b/riscv/Makefile @@ -20,6 +20,7 @@ all: $(tests) $(TEST_DIR)/sbi-deps += $(TEST_DIR)/sbi-asm.o $(TEST_DIR)/sbi-deps += $(TEST_DIR)/sbi-fwft.o $(TEST_DIR)/sbi-deps += $(TEST_DIR)/sbi-sse.o +$(TEST_DIR)/sbi-deps += $(TEST_DIR)/sbi-dbtr.o all_deps += $($(TEST_DIR)/sbi-deps) diff --git a/riscv/sbi-dbtr.c b/riscv/sbi-dbtr.c new file mode 100644 index 00000000..ebaa6f59 --- /dev/null +++ b/riscv/sbi-dbtr.c @@ -0,0 +1,824 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * SBI DBTR testsuite + * + * Copyright (C) 2025, Rivos Inc., Jesse Taube <jesse(a)rivosinc.com> + */ + + #include <libcflat.h> + #include <bitops.h> + + #include <asm/io.h> + #include <asm/processor.h> + + #include "sbi-tests.h" + +#define RV_MAX_TRIGGERS 32 + +#define SBI_DBTR_TRIG_STATE_MAPPED BIT(0) +#define SBI_DBTR_TRIG_STATE_U BIT(1) +#define SBI_DBTR_TRIG_STATE_S BIT(2) +#define SBI_DBTR_TRIG_STATE_VU BIT(3) +#define SBI_DBTR_TRIG_STATE_VS BIT(4) +#define SBI_DBTR_TRIG_STATE_HAVE_HW_TRIG BIT(5) + +#define SBI_DBTR_TRIG_STATE_HW_TRIG_IDX_SHIFT 8 +#define SBI_DBTR_TRIG_STATE_HW_TRIG_IDX(trig_state) (trig_state >> SBI_DBTR_TRIG_STATE_HW_TRIG_IDX_SHIFT) + +#define SBI_DBTR_TDATA1_TYPE_SHIFT (__riscv_xlen - 4) + +#define SBI_DBTR_TDATA1_MCONTROL6_LOAD_BIT BIT(0) +#define SBI_DBTR_TDATA1_MCONTROL6_STORE_BIT BIT(1) +#define SBI_DBTR_TDATA1_MCONTROL6_EXECUTE_BIT BIT(2) +#define SBI_DBTR_TDATA1_MCONTROL6_U_BIT BIT(3) +#define SBI_DBTR_TDATA1_MCONTROL6_S_BIT BIT(4) +#define SBI_DBTR_TDATA1_MCONTROL6_SELECT_BIT BIT(21) +#define SBI_DBTR_TDATA1_MCONTROL6_VS_BIT BIT(23) +#define SBI_DBTR_TDATA1_MCONTROL6_VU_BIT BIT(24) + +#define SBI_DBTR_TDATA1_MCONTROL_LOAD_BIT BIT(0) +#define SBI_DBTR_TDATA1_MCONTROL_STORE_BIT BIT(1) +#define SBI_DBTR_TDATA1_MCONTROL_EXECUTE_BIT BIT(2) +#define SBI_DBTR_TDATA1_MCONTROL_U_BIT BIT(3) +#define SBI_DBTR_TDATA1_MCONTROL_S_BIT BIT(4) +#define SBI_DBTR_TDATA1_MCONTROL_SELECT_BIT BIT(19) + +enum McontrolType { + SBI_DBTR_TDATA1_TYPE_NONE = (0UL << SBI_DBTR_TDATA1_TYPE_SHIFT), + SBI_DBTR_TDATA1_TYPE_LEGACY = (1UL << SBI_DBTR_TDATA1_TYPE_SHIFT), + SBI_DBTR_TDATA1_TYPE_MCONTROL = (2UL << SBI_DBTR_TDATA1_TYPE_SHIFT), + SBI_DBTR_TDATA1_TYPE_ICOUNT = (3UL << SBI_DBTR_TDATA1_TYPE_SHIFT), + SBI_DBTR_TDATA1_TYPE_ITRIGGER = (4UL << SBI_DBTR_TDATA1_TYPE_SHIFT), + SBI_DBTR_TDATA1_TYPE_ETRIGGER = (5UL << SBI_DBTR_TDATA1_TYPE_SHIFT), + SBI_DBTR_TDATA1_TYPE_MCONTROL6 = (6UL << SBI_DBTR_TDATA1_TYPE_SHIFT), + SBI_DBTR_TDATA1_TYPE_TMEXTTRIGGER = (7UL << SBI_DBTR_TDATA1_TYPE_SHIFT), + SBI_DBTR_TDATA1_TYPE_RESERVED0 = (8UL << SBI_DBTR_TDATA1_TYPE_SHIFT), + SBI_DBTR_TDATA1_TYPE_RESERVED1 = (9UL << SBI_DBTR_TDATA1_TYPE_SHIFT), + SBI_DBTR_TDATA1_TYPE_RESERVED2 = (10UL << SBI_DBTR_TDATA1_TYPE_SHIFT), + SBI_DBTR_TDATA1_TYPE_RESERVED3 = (11UL << SBI_DBTR_TDATA1_TYPE_SHIFT), + SBI_DBTR_TDATA1_TYPE_CUSTOM0 = (12UL << SBI_DBTR_TDATA1_TYPE_SHIFT), + SBI_DBTR_TDATA1_TYPE_CUSTOM1 = (13UL << SBI_DBTR_TDATA1_TYPE_SHIFT), + SBI_DBTR_TDATA1_TYPE_CUSTOM2 = (14UL << SBI_DBTR_TDATA1_TYPE_SHIFT), + SBI_DBTR_TDATA1_TYPE_DISABLED = (15UL << SBI_DBTR_TDATA1_TYPE_SHIFT), +}; + +enum Tdata1Value { + VALUE_NONE = 0, + VALUE_LOAD = BIT(0), + VALUE_STORE = BIT(1), + VALUE_EXECUTE = BIT(2), +}; + +enum Tdata1Mode { + MODE_NONE = 0, + MODE_M = BIT(0), + MODE_U = BIT(1), + MODE_S = BIT(2), + MODE_VU = BIT(3), + MODE_VS = BIT(4), +}; + +enum sbi_ext_dbtr_fid { + SBI_EXT_DBTR_NUM_TRIGGERS = 0, + SBI_EXT_DBTR_SETUP_SHMEM, + SBI_EXT_DBTR_TRIGGER_READ, + SBI_EXT_DBTR_TRIGGER_INSTALL, + SBI_EXT_DBTR_TRIGGER_UPDATE, + SBI_EXT_DBTR_TRIGGER_UNINSTALL, + SBI_EXT_DBTR_TRIGGER_ENABLE, + SBI_EXT_DBTR_TRIGGER_DISABLE, +}; + +struct sbi_dbtr_data_msg { + unsigned long tstate; + unsigned long tdata1; + unsigned long tdata2; + unsigned long tdata3; +}; + +struct sbi_dbtr_id_msg { + unsigned long idx; +}; + +/* SBI shared mem messages layout */ +struct sbi_dbtr_shmem_entry { + union { + struct sbi_dbtr_data_msg data; + struct sbi_dbtr_id_msg id; + }; +}; + +static bool dbtr_handled; + +/* Expected to be leaf function as not to disrupt frame-pointer */ +static __attribute__((naked)) void exec_call(void) +{ + /* skip over nop when triggered instead of ret. */ + asm volatile (".option push\n" + ".option arch, -c\n" + "nop\n" + "ret\n" + ".option pop\n"); +} + +static void dbtr_exception_handler(struct pt_regs *regs) +{ + dbtr_handled = true; + + /* Reading *epc may cause a fault, skip over nop */ + if ((void *)regs->epc == exec_call) { + regs->epc += 4; + return; + } + + /* WARNING: Skips over the trapped intruction */ + regs->epc += RV_INSN_LEN(readw((void *)regs->epc)); +} + +static bool do_save(void *tdata2) +{ + bool ret; + + writel(0, tdata2); + + ret = dbtr_handled; + dbtr_handled = false; + + return ret; +} + +static bool do_load(void *tdata2) +{ + bool ret; + + readl(tdata2); + + ret = dbtr_handled; + dbtr_handled = false; + + return ret; +} + +static bool do_exec(void) +{ + bool ret; + + exec_call(); + + ret = dbtr_handled; + dbtr_handled = false; + + return ret; +} + +static unsigned long gen_tdata1_mcontrol(enum Tdata1Mode mode, enum Tdata1Value value) +{ + unsigned long tdata1 = SBI_DBTR_TDATA1_TYPE_MCONTROL; + + if (value & VALUE_LOAD) + tdata1 |= SBI_DBTR_TDATA1_MCONTROL_LOAD_BIT; + + if (value & VALUE_STORE) + tdata1 |= SBI_DBTR_TDATA1_MCONTROL_STORE_BIT; + + if (value & VALUE_EXECUTE) + tdata1 |= SBI_DBTR_TDATA1_MCONTROL_EXECUTE_BIT; + + if (mode & MODE_M) + tdata1 |= SBI_DBTR_TDATA1_MCONTROL_U_BIT; + + if (mode & MODE_U) + tdata1 |= SBI_DBTR_TDATA1_MCONTROL_U_BIT; + + if (mode & MODE_S) + tdata1 |= SBI_DBTR_TDATA1_MCONTROL_S_BIT; + + return tdata1; +} + +static unsigned long gen_tdata1_mcontrol6(enum Tdata1Mode mode, enum Tdata1Value value) +{ + unsigned long tdata1 = SBI_DBTR_TDATA1_TYPE_MCONTROL6; + + if (value & VALUE_LOAD) + tdata1 |= SBI_DBTR_TDATA1_MCONTROL6_LOAD_BIT; + + if (value & VALUE_STORE) + tdata1 |= SBI_DBTR_TDATA1_MCONTROL6_STORE_BIT; + + if (value & VALUE_EXECUTE) + tdata1 |= SBI_DBTR_TDATA1_MCONTROL6_EXECUTE_BIT; + + if (mode & MODE_M) + tdata1 |= SBI_DBTR_TDATA1_MCONTROL6_U_BIT; + + if (mode & MODE_U) + tdata1 |= SBI_DBTR_TDATA1_MCONTROL6_U_BIT; + + if (mode & MODE_S) + tdata1 |= SBI_DBTR_TDATA1_MCONTROL6_S_BIT; + + if (mode & MODE_VU) + tdata1 |= SBI_DBTR_TDATA1_MCONTROL6_VU_BIT; + + if (mode & MODE_VS) + tdata1 |= SBI_DBTR_TDATA1_MCONTROL6_VS_BIT; + + return tdata1; +} + +static unsigned long gen_tdata1(enum McontrolType type, enum Tdata1Value value, enum Tdata1Mode mode) +{ + switch (type) { + case SBI_DBTR_TDATA1_TYPE_MCONTROL: + return gen_tdata1_mcontrol(mode, value); + case SBI_DBTR_TDATA1_TYPE_MCONTROL6: + return gen_tdata1_mcontrol6(mode, value); + default: + return 0; + } +} + +static struct sbiret sbi_debug_num_triggers(unsigned long trig_tdata1) +{ + return sbi_ecall(SBI_EXT_DBTR, SBI_EXT_DBTR_NUM_TRIGGERS, trig_tdata1, 0, 0, 0, 0, 0); +} + +static struct sbiret sbi_debug_set_shmem_raw(unsigned long shmem_phys_lo, + unsigned long shmem_phys_hi, + unsigned long flags) +{ + return sbi_ecall(SBI_EXT_DBTR, SBI_EXT_DBTR_SETUP_SHMEM, shmem_phys_lo, + shmem_phys_hi, flags, 0, 0, 0); +} + +static struct sbiret sbi_debug_set_shmem(void *shmem) +{ + phys_addr_t p = virt_to_phys(shmem); + + return sbi_debug_set_shmem_raw(lower_32_bits(p), upper_32_bits(p), 0); +} + +static struct sbiret sbi_debug_read_triggers(unsigned long trig_idx_base, + unsigned long trig_count) +{ + return sbi_ecall(SBI_EXT_DBTR, SBI_EXT_DBTR_TRIGGER_READ, trig_idx_base, + trig_count, 0, 0, 0, 0); +} + +static struct sbiret sbi_debug_install_triggers(unsigned long trig_count) +{ + return sbi_ecall(SBI_EXT_DBTR, SBI_EXT_DBTR_TRIGGER_INSTALL, trig_count, 0, 0, 0, 0, 0); +} + +static struct sbiret sbi_debug_update_triggers(unsigned long trig_count) +{ + return sbi_ecall(SBI_EXT_DBTR, SBI_EXT_DBTR_TRIGGER_UPDATE, trig_count, 0, 0, 0, 0, 0); +} + +static struct sbiret sbi_debug_uninstall_triggers(unsigned long trig_idx_base, + unsigned long trig_idx_mask) +{ + return sbi_ecall(SBI_EXT_DBTR, SBI_EXT_DBTR_TRIGGER_UNINSTALL, trig_idx_base, + trig_idx_mask, 0, 0, 0, 0); +} + +static struct sbiret sbi_debug_enable_triggers(unsigned long trig_idx_base, + unsigned long trig_idx_mask) +{ + return sbi_ecall(SBI_EXT_DBTR, SBI_EXT_DBTR_TRIGGER_ENABLE, trig_idx_base, + trig_idx_mask, 0, 0, 0, 0); +} + +static struct sbiret sbi_debug_disable_triggers(unsigned long trig_idx_base, + unsigned long trig_idx_mask) +{ + return sbi_ecall(SBI_EXT_DBTR, SBI_EXT_DBTR_TRIGGER_DISABLE, trig_idx_base, + trig_idx_mask, 0, 0, 0, 0); +} + +static bool dbtr_install_trigger(struct sbi_dbtr_shmem_entry *shmem, void *tdata2, + unsigned long tdata1) +{ + struct sbiret sbi_ret; + bool ret; + + shmem->data.tdata1 = tdata1; + shmem->data.tdata2 = (unsigned long)tdata2; + + sbi_ret = sbi_debug_install_triggers(1); + ret = sbiret_report_error(&sbi_ret, SBI_SUCCESS, "sbi_debug_install_triggers"); + if (ret) + install_exception_handler(EXC_BREAKPOINT, dbtr_exception_handler); + + return ret; +} + +static bool dbtr_uninstall_trigger(void) +{ + struct sbiret ret; + + install_exception_handler(EXC_BREAKPOINT, NULL); + + ret = sbi_debug_uninstall_triggers(0, 1); + return sbiret_report_error(&ret, SBI_SUCCESS, "sbi_debug_uninstall_triggers"); +} + +static unsigned long dbtr_test_num_triggers(void) +{ + struct sbiret ret; + unsigned long tdata1 = 0; + /* sbi_debug_num_triggers will return trig_max in sbiret.value when trig_tdata1 == 0 */ + + /* should be at least one trigger. */ + ret = sbi_debug_num_triggers(tdata1); + sbiret_report_error(&ret, SBI_SUCCESS, "sbi_debug_num_triggers"); + + if (ret.value == 0) + report_fail("sbi_debug_num_triggers: Returned 0 triggers available"); + else + report_pass("sbi_debug_num_triggers: Returned %lu triggers available", ret.value); + + return ret.value; +} + +static enum McontrolType dbtr_test_type(unsigned long *num_trig) +{ + struct sbiret ret; + unsigned long tdata1 = SBI_DBTR_TDATA1_TYPE_MCONTROL6; + + ret = sbi_debug_num_triggers(tdata1); + sbiret_report_error(&ret, SBI_SUCCESS, "sbi_debug_num_triggers"); + if (ret.value > 0) { + report_pass("sbi_debug_num_triggers: Returned %lu mcontrol6 triggers available", + ret.value); + *num_trig = ret.value; + return tdata1; + } + + tdata1 = SBI_DBTR_TDATA1_TYPE_MCONTROL; + + ret = sbi_debug_num_triggers(tdata1); + sbiret_report_error(&ret, SBI_SUCCESS, "sbi_debug_num_triggers"); + *num_trig = ret.value; + if (ret.value > 0) { + report_pass("sbi_debug_num_triggers: Returned %lu mcontrol triggers available", + ret.value); + return tdata1; + } + + report_fail("sbi_debug_num_triggers: Returned 0 mcontrol(6) triggers available"); + + return SBI_DBTR_TDATA1_TYPE_NONE; +} + +static struct sbiret dbtr_test_save_install_uninstall(struct sbi_dbtr_shmem_entry *shmem, + enum McontrolType type) +{ + static unsigned long test; + struct sbiret ret; + + report_prefix_push("save_trigger"); + + shmem->data.tdata1 = gen_tdata1(type, VALUE_STORE, MODE_S | MODE_S); + shmem->data.tdata2 = (unsigned long)&test; + + ret = sbi_debug_install_triggers(1); + if (!sbiret_report_error(&ret, SBI_SUCCESS, "sbi_debug_install_triggers")) { + report_prefix_pop(); + return ret; + } + + install_exception_handler(EXC_BREAKPOINT, dbtr_exception_handler); + + report(do_save(&test), "triggered"); + + if (do_load(&test)) + report_fail("triggered by load"); + + ret = sbi_debug_uninstall_triggers(0, 1); + sbiret_report_error(&ret, SBI_SUCCESS, "sbi_debug_uninstall_triggers"); + + if (do_save(&test)) + report_fail("triggered after uninstall"); + + install_exception_handler(EXC_BREAKPOINT, NULL); + report_prefix_pop(); + + return ret; +} + +static void dbtr_test_update(struct sbi_dbtr_shmem_entry *shmem, enum McontrolType type) +{ + static unsigned long test; + struct sbiret ret; + bool kfail; + + report_prefix_push("update_trigger"); + + if (!dbtr_install_trigger(shmem, NULL, gen_tdata1(type, VALUE_NONE, MODE_NONE))) { + report_prefix_pop(); + return; + } + + shmem->id.idx = 0; + shmem->data.tdata1 = gen_tdata1(type, VALUE_STORE, MODE_S); + shmem->data.tdata2 = (unsigned long)&test; + + ret = sbi_debug_update_triggers(1); + sbiret_report_error(&ret, SBI_SUCCESS, "sbi_debug_update_triggers"); + + /* Known broken update_triggers. + * https://lore.kernel.org/opensbi/aDdp1UeUh7GugeHp@ghost/T/#t + */ + kfail = __sbi_get_imp_id() == SBI_IMPL_OPENSBI && + __sbi_get_imp_version() < sbi_impl_opensbi_mk_version(1, 7); + report_kfail(kfail, do_save(&test), "triggered"); + + dbtr_uninstall_trigger(); + report_prefix_pop(); +} + +static void dbtr_test_load(struct sbi_dbtr_shmem_entry *shmem, enum McontrolType type) +{ + static unsigned long test; + + report_prefix_push("load_trigger"); + if (!dbtr_install_trigger(shmem, &test, gen_tdata1(type, VALUE_LOAD, MODE_S))) { + report_prefix_pop(); + return; + } + + report(do_load(&test), "triggered"); + + if (do_save(&test)) + report_fail("triggered by save"); + + dbtr_uninstall_trigger(); + report_prefix_pop(); +} + +static void dbtr_test_disable_enable(struct sbi_dbtr_shmem_entry *shmem, enum McontrolType type) +{ + static unsigned long test; + struct sbiret ret; + + report_prefix_push("sbi_debug_disable_triggers"); + if (!dbtr_install_trigger(shmem, &test, gen_tdata1(type, VALUE_STORE, MODE_S))) { + report_prefix_pop(); + return; + } + + ret = sbi_debug_disable_triggers(0, 1); + sbiret_report_error(&ret, SBI_SUCCESS, "sbi_debug_disable_triggers"); + + if (do_save(&test)) { + report_fail("should not trigger"); + + dbtr_uninstall_trigger(); + report_prefix_pop(); + report_skip("sbi_debug_enable_triggers: no disable"); + + return; + } + + report_pass("should not trigger"); + + report_prefix_pop(); + report_prefix_push("sbi_debug_enable_triggers"); + + ret = sbi_debug_enable_triggers(0, 1); + sbiret_report_error(&ret, SBI_SUCCESS, "sbi_debug_enable_triggers"); + + report(do_save(&test), "triggered"); + + dbtr_uninstall_trigger(); + report_prefix_pop(); +} + +static void dbtr_test_exec(struct sbi_dbtr_shmem_entry *shmem, enum McontrolType type) +{ + static unsigned long test; + + report_prefix_push("exec_trigger"); + /* check if loads and saves trigger exec */ + if (!dbtr_install_trigger(shmem, &test, gen_tdata1(type, VALUE_EXECUTE, MODE_S))) { + report_prefix_pop(); + return; + } + + if (do_load(&test)) + report_fail("triggered by load"); + + if (do_save(&test)) + report_fail("triggered by save"); + + dbtr_uninstall_trigger(); + + /* Check if exec works */ + if (!dbtr_install_trigger(shmem, exec_call, gen_tdata1(type, VALUE_EXECUTE, MODE_S))) { + report_prefix_pop(); + return; + } + report(do_exec(), "exec trigger"); + + dbtr_uninstall_trigger(); + report_prefix_pop(); +} + +static void dbtr_test_read(struct sbi_dbtr_shmem_entry *shmem, enum McontrolType type) +{ + const unsigned long tstatus_expected = SBI_DBTR_TRIG_STATE_S | SBI_DBTR_TRIG_STATE_MAPPED; + const unsigned long tdata1 = gen_tdata1(type, VALUE_STORE, MODE_S); + static unsigned long test; + struct sbiret ret; + + report_prefix_push("sbi_debug_read_triggers"); + if (!dbtr_install_trigger(shmem, &test, tdata1)) { + report_prefix_pop(); + return; + } + + ret = sbi_debug_read_triggers(0, 1); + sbiret_report_error(&ret, SBI_SUCCESS, "sbi_debug_read_triggers"); + + report(shmem->data.tdata1 == tdata1, "tdata1 expected: 0x%016lx, found: 0x%016lx", + tdata1, shmem->data.tdata1); + report(shmem->data.tdata2 == ((unsigned long)&test), + "tdata2 expected: 0x%016lx, found: 0x%016lx", ((unsigned long)&test), + shmem->data.tdata2); + report(shmem->data.tstate == tstatus_expected, "tstate expected: 0x%016lx, found: 0x%016lx", + tstatus_expected, shmem->data.tstate); + + dbtr_uninstall_trigger(); + report_prefix_pop(); +} + +static void check_exec(unsigned long base) +{ + struct sbiret ret; + + report(do_exec(), "exec triggered"); + + ret = sbi_debug_uninstall_triggers(base, 1); + sbiret_report_error(&ret, SBI_SUCCESS, "sbi_debug_uninstall_triggers"); +} + +static void dbtr_test_multiple(struct sbi_dbtr_shmem_entry *shmem, enum McontrolType type, + unsigned long num_trigs) +{ + static unsigned long test[2]; + struct sbiret ret; + bool have_three = num_trigs > 2; + + if (num_trigs < 2) + return; + + report_prefix_push("test_multiple"); + + if (!dbtr_install_trigger(shmem, &test[0], gen_tdata1(type, VALUE_STORE, MODE_S))) { + report_prefix_pop(); + return; + } + if (!dbtr_install_trigger(shmem, &test[1], gen_tdata1(type, VALUE_LOAD, MODE_S))) + goto error; + if (have_three && + !dbtr_install_trigger(shmem, exec_call, gen_tdata1(type, VALUE_EXECUTE, MODE_S))) { + ret = sbi_debug_uninstall_triggers(1, 1); + sbiret_report_error(&ret, SBI_SUCCESS, "sbi_debug_uninstall_triggers"); + goto error; + } + + report(do_save(&test[0]), "save triggered"); + + if (do_load(&test[0])) + report_fail("save triggered by load"); + + report(do_load(&test[1]), "load triggered"); + + if (do_save(&test[1])) + report_fail("load triggered by save"); + + if (have_three) + check_exec(2); + + ret = sbi_debug_uninstall_triggers(1, 1); + sbiret_report_error(&ret, SBI_SUCCESS, "sbi_debug_uninstall_triggers"); + + if (do_load(&test[1])) + report_fail("load triggered after uninstall"); + + report(do_save(&test[0]), "save triggered"); + + if (!have_three && + dbtr_install_trigger(shmem, exec_call, gen_tdata1(type, VALUE_EXECUTE, MODE_S))) + check_exec(1); + +error: + ret = sbi_debug_uninstall_triggers(0, 1); + sbiret_report_error(&ret, SBI_SUCCESS, "sbi_debug_uninstall_triggers"); + + install_exception_handler(EXC_BREAKPOINT, NULL); + report_prefix_pop(); +} + +static void dbtr_test_multiple_types(struct sbi_dbtr_shmem_entry *shmem, unsigned long type) +{ + static unsigned long test; + + report_prefix_push("dbtr_test_multiple_types"); + + /* check if loads and saves trigger exec */ + if (!dbtr_install_trigger(shmem, &test, + gen_tdata1(type, VALUE_EXECUTE | VALUE_LOAD | VALUE_STORE, MODE_S))) { + report_prefix_pop(); + return; + } + + report(do_load(&test), "load trigger"); + + report(do_save(&test), "save trigger"); + + dbtr_uninstall_trigger(); + + /* Check if exec works */ + if (!dbtr_install_trigger(shmem, exec_call, + gen_tdata1(type, VALUE_EXECUTE | VALUE_LOAD | VALUE_STORE, MODE_S))) { + report_prefix_pop(); + return; + } + + report(do_exec(), "exec trigger"); + + dbtr_uninstall_trigger(); + report_prefix_pop(); +} + +static void dbtr_test_disable_uninstall(struct sbi_dbtr_shmem_entry *shmem, enum McontrolType type) +{ + static unsigned long test; + struct sbiret ret; + + report_prefix_push("disable uninstall"); + if (!dbtr_install_trigger(shmem, &test, gen_tdata1(type, VALUE_STORE, MODE_S))) { + report_prefix_pop(); + return; + } + + ret = sbi_debug_disable_triggers(0, 1); + sbiret_report_error(&ret, SBI_SUCCESS, "sbi_debug_disable_triggers"); + + dbtr_uninstall_trigger(); + + if (!dbtr_install_trigger(shmem, &test, gen_tdata1(type, VALUE_STORE, MODE_S))) { + report_prefix_pop(); + return; + } + + report(do_save(&test), "triggered"); + + dbtr_uninstall_trigger(); + report_prefix_pop(); +} + +static void dbtr_test_uninstall_enable(struct sbi_dbtr_shmem_entry *shmem, enum McontrolType type) +{ + static unsigned long test; + struct sbiret ret; + + report_prefix_push("uninstall enable"); + if (!dbtr_install_trigger(shmem, &test, gen_tdata1(type, VALUE_STORE, MODE_S))) { + report_prefix_pop(); + return; + } + dbtr_uninstall_trigger(); + + ret = sbi_debug_enable_triggers(0, 1); + sbiret_report_error(&ret, SBI_SUCCESS, "sbi_debug_enable_triggers"); + + install_exception_handler(EXC_BREAKPOINT, dbtr_exception_handler); + + report(!do_save(&test), "should not trigger"); + + install_exception_handler(EXC_BREAKPOINT, NULL); + report_prefix_pop(); +} + +static void dbtr_test_uninstall_update(struct sbi_dbtr_shmem_entry *shmem, enum McontrolType type) +{ + static unsigned long test; + struct sbiret ret; + bool kfail; + + report_prefix_push("uninstall update"); + if (!dbtr_install_trigger(shmem, NULL, gen_tdata1(type, VALUE_NONE, MODE_NONE))) { + report_prefix_pop(); + return; + } + + dbtr_uninstall_trigger(); + + shmem->id.idx = 0; + shmem->data.tdata1 = gen_tdata1(type, VALUE_STORE, MODE_S); + shmem->data.tdata2 = (unsigned long)&test; + + /* Known broken update_triggers. + * https://lore.kernel.org/opensbi/aDdp1UeUh7GugeHp@ghost/T/#t + */ + kfail = __sbi_get_imp_id() == SBI_IMPL_OPENSBI && + __sbi_get_imp_version() < sbi_impl_opensbi_mk_version(1, 7); + ret = sbi_debug_update_triggers(1); + sbiret_kfail_error(kfail, &ret, SBI_ERR_FAILURE, "sbi_debug_update_triggers"); + + install_exception_handler(EXC_BREAKPOINT, dbtr_exception_handler); + + report(!do_save(&test), "should not trigger"); + + install_exception_handler(EXC_BREAKPOINT, NULL); + report_prefix_pop(); +} + +static void dbtr_test_disable_read(struct sbi_dbtr_shmem_entry *shmem, enum McontrolType type) +{ + const unsigned long tstatus_expected = SBI_DBTR_TRIG_STATE_S | SBI_DBTR_TRIG_STATE_MAPPED; + const unsigned long tdata1 = gen_tdata1(type, VALUE_STORE, MODE_NONE); + static unsigned long test; + struct sbiret ret; + + report_prefix_push("disable_read"); + if (!dbtr_install_trigger(shmem, &test, gen_tdata1(type, VALUE_STORE, MODE_S))) { + report_prefix_pop(); + return; + } + + ret = sbi_debug_disable_triggers(0, 1); + sbiret_report_error(&ret, SBI_SUCCESS, "sbi_debug_disable_triggers"); + + ret = sbi_debug_read_triggers(0, 1); + sbiret_report_error(&ret, SBI_SUCCESS, "sbi_debug_read_triggers"); + + report(shmem->data.tdata1 == tdata1, "tdata1 expected: 0x%016lx, found: 0x%016lx", + tdata1, shmem->data.tdata1); + report(shmem->data.tdata2 == ((unsigned long)&test), + "tdata2 expected: 0x%016lx, found: 0x%016lx", + ((unsigned long)&test), shmem->data.tdata2); + report(shmem->data.tstate == tstatus_expected, "tstate expected: 0x%016lx, found: 0x%016lx", + tstatus_expected, shmem->data.tstate); + + dbtr_uninstall_trigger(); + report_prefix_pop(); +} + +void check_dbtr(void) +{ + static struct sbi_dbtr_shmem_entry shmem[RV_MAX_TRIGGERS] = {}; + unsigned long num_trigs; + enum McontrolType trig_type; + struct sbiret ret; + + report_prefix_push("dbtr"); + + if (!sbi_probe(SBI_EXT_DBTR)) { + report_skip("extension not available"); + report_prefix_pop(); + return; + } + + if (__sbi_get_imp_id() == SBI_IMPL_OPENSBI && + __sbi_get_imp_version() < sbi_impl_opensbi_mk_version(1, 6)) { + report_skip("OpenSBI < v1.7 detected, skipping tests"); + report_prefix_pop(); + return; + } + + num_trigs = dbtr_test_num_triggers(); + if (!num_trigs) + goto error; + + trig_type = dbtr_test_type(&num_trigs); + if (trig_type == SBI_DBTR_TDATA1_TYPE_NONE) + goto error; + + ret = sbi_debug_set_shmem(shmem); + sbiret_report_error(&ret, SBI_SUCCESS, "sbi_debug_set_shmem"); + + ret = dbtr_test_save_install_uninstall(&shmem[0], trig_type); + /* install or uninstall failed */ + if (ret.error != SBI_SUCCESS) + goto error; + + dbtr_test_load(&shmem[0], trig_type); + dbtr_test_exec(&shmem[0], trig_type); + dbtr_test_read(&shmem[0], trig_type); + dbtr_test_disable_enable(&shmem[0], trig_type); + dbtr_test_update(&shmem[0], trig_type); + dbtr_test_multiple_types(&shmem[0], trig_type); + dbtr_test_multiple(shmem, trig_type, num_trigs); + dbtr_test_disable_uninstall(&shmem[0], trig_type); + dbtr_test_uninstall_enable(&shmem[0], trig_type); + dbtr_test_uninstall_update(&shmem[0], trig_type); + dbtr_test_disable_read(&shmem[0], trig_type); + +error: + report_prefix_pop(); +} diff --git a/riscv/sbi-tests.h b/riscv/sbi-tests.h index d5c4ae70..6a227745 100644 --- a/riscv/sbi-tests.h +++ b/riscv/sbi-tests.h @@ -99,6 +99,7 @@ static inline bool env_enabled(const char *env) void sbi_bad_fid(int ext); void check_sse(void); +void check_dbtr(void); #endif /* __ASSEMBLER__ */ #endif /* _RISCV_SBI_TESTS_H_ */ diff --git a/riscv/sbi.c b/riscv/sbi.c index edb1a6be..5bd496d0 100644 --- a/riscv/sbi.c +++ b/riscv/sbi.c @@ -1561,6 +1561,7 @@ int main(int argc, char **argv) check_susp(); check_sse(); check_fwft(); + check_dbtr(); return report_summary(); } -- 2.43.0

1 week, 3 days

2
1
0 0

[PATCH net-next v2 0/4] netdevsim: implement RX statistics using NETDEV_PCPU_STAT_DSTATS

by Breno Leitao

The netdevsim driver previously lacked RX statistics support, which prevented its use with the GenerateTraffic() test framework, as this framework verifies traffic flow by checking RX byte counts. This patch migrates netdevsim from its custom statistics collection to the NETDEV_PCPU_STAT_DSTATS framework, as suggested by Jakub. This change not only standardizes the statistics handling but also adds the necessary RX statistics support required by the test framework. Signed-off-by: Breno Leitao <leitao(a)debian.org> --- Changes in v2: - Changed the RX collection place from nsim_napi_rx() to nsim_rcv (Joe Damato) - Collect RX dropped packets statistic in nsim_queue_free() (Jakub) - Added a helper in dstat to add values to RX dropped packets - Link to v1: https://lore.kernel.org/r/20250611-netdevsim_stat-v1-0-c11b657d96bf@debian.… --- Breno Leitao (4): netdevsim: migrate to dstats stats collection netdevsim: collect statistics at RX side net: add dev_dstats_rx_dropped_add() helper netdevsim: account dropped packet length in stats on queue free drivers/net/netdevsim/netdev.c | 48 ++++++++++++++++----------------------- drivers/net/netdevsim/netdevsim.h | 5 ---- include/linux/netdevice.h | 10 ++++++++ 3 files changed, 29 insertions(+), 34 deletions(-) --- base-commit: 6d4e01d29d87356924f1521ca6df7a364e948f13 change-id: 20250610-netdevsim_stat-95995921e03e Best regards, -- Breno Leitao <leitao(a)debian.org>

1 week, 3 days

2
7
0 0

[PATCH v9 iproute2-next 0/1] DUALPI2 iproute2 patch

by chia-yu.chang＠nokia-bell-labs.com

From: Chia-Yu Chang <chia-yu.chang(a)nokia-bell-labs.com> Hello, Please find DUALPI2 iproute2 patch v9. For more details of DualPI2, please refer IETF RFC9332 (https://datatracker.ietf.org/doc/html/rfc9332). Best Regards, Chia-Yu --- v9 (13-Jun-25) - Fix space issue and typos (ALOK TIWARI <alok.a.tiwari(a)oracle.com>) - Change 'rtt_typical' to 'typical_rtt' in tc/q_dualpi2.c (ALOK TIWARI <alok.a.tiwari(a)oracle.com>) - Add the num of enum used by DualPI2 in pkt_sched.h v8 (09-May-25) - Update pkt_sched.h with the one in nex-next - Correct a typo in the comment within pkt_sched.h (ALOK TIWARI <alok.a.tiwari(a)oracle.com>) - Update manual content in man/man8/tc-dualpi2.8 (ALOK TIWARI <alok.a.tiwari(a)oracle.com>) - Update tc/q_dualpi2.c to fix missing blank lines and add missing case (ALOK TIWARI <alok.a.tiwari(a)oracle.com>) v7 (05-May-25) - Align pkt_sched.h with the v14 version of net-next due to spec modification in tc.yaml - Reorganize dualpi2_print_opt() to match the order in tc.yaml - Remove credit-queue in PRINT_JSON v6 (26-Apr-25) - Update JSON file output due to spec modification in tc.yaml of net-next v5 (25-Mar-25) - Use matches() to replace current strcmp() (Stephen Hemminger <stephen(a)networkplumber.org>) - Use general parse_percent() for handling scaled percentage values (Stephen Hemminger <stephen(a)networkplumber.org>) - Add print function for JSON of dualpi2 stats (Stephen Hemminger <stephen(a)networkplumber.org>) v4 (16-Mar-25) - Add min_qlen_step to the dualpi2 attribute as the minimum queue length in number of packets in the L-queue to start step marking. v3 (21-Feb-25) - Add memlimit to the dualpi2 attribute, and add memory_used, max_memory_used, and memory_limit in dualpi2 stats (Dave Taht <dave.taht(a)gmail.com>) - Update the manual to align with the latest implementation and clarify the queue naming and default unit - Use common "get_scaled_alpha_beta" and clean print_opt for Dualpi2 v2 (23-Oct-24) - Rename get_float in dualpi2 to get_float_min_max in utils.c - Move get_float from iplink_can.c in utils.c (Stephen Hemminger <stephen(a)networkplumber.org>) - Add print function for JSON of dualpi2 (Stephen Hemminger <stephen(a)networkplumber.org>) --- Chia-Yu Chang (1): tc: add dualpi2 scheduler module bash-completion/tc | 11 +- include/uapi/linux/pkt_sched.h | 70 ++++- include/utils.h | 2 + ip/iplink_can.c | 14 - lib/utils.c | 30 ++ man/man8/tc-dualpi2.8 | 249 +++++++++++++++ tc/Makefile | 1 + tc/q_dualpi2.c | 534 +++++++++++++++++++++++++++++++++ 8 files changed, 895 insertions(+), 16 deletions(-) create mode 100644 man/man8/tc-dualpi2.8 create mode 100644 tc/q_dualpi2.c -- 2.34.1

1 week, 3 days

1
1
0 0

[kvm-unit-tests PATCH 1/2] riscv: Allow SBI_CONSOLE with no uart in device tree

by Jesse Taube

When CONFIG_SBI_CONSOLE is enabled and there is no uart defined in the device tree kvm-unit-tests fails to start. Only check if uart exists in device tree if SBI_CONSOLE is false. Signed-off-by: Jesse Taube <jesse(a)rivosinc.com> --- lib/riscv/io.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/lib/riscv/io.c b/lib/riscv/io.c index fb40adb7..96a3c048 100644 --- a/lib/riscv/io.c +++ b/lib/riscv/io.c @@ -104,6 +104,7 @@ static void uart0_init_acpi(void) void io_init(void) { +#ifndef CONFIG_SBI_CONSOLE if (dt_available()) uart0_init_fdt(); else @@ -114,6 +115,7 @@ void io_init(void) "Found uart at %p, but early base is %p.\n", uart0_base, UART_EARLY_BASE); } +#endif } #ifdef CONFIG_SBI_CONSOLE -- 2.43.0

1 week, 3 days

2
3
0 0

[PATCH v2] selftests/mm: Add configs to fix testcase failure

by Dev Jain

If CONFIG_UPROBES is not set, a merge subtest fails: Failure log: 7151 12:46:54.627936 # # # RUN merge.handle_uprobe_upon_merged_vma ... 7152 12:46:54.639014 # # f /sys/bus/event_source/devices/uprobe/type 7153 12:46:54.639306 # # fopen: No such file or directory 7154 12:46:54.650451 # # # merge.c:473:handle_uprobe_upon_merged_vma:Expected read_sysfs("/sys/bus/event_source/devices/uprobe/type", &type) (1) == 0 (0) 7155 12:46:54.650730 # # # handle_uprobe_upon_merged_vma: Test terminated by assertion 7156 12:46:54.661750 # # # FAIL merge.handle_uprobe_upon_merged_vma 7157 12:46:54.662030 # # not ok 8 merge.handle_uprobe_upon_merged_vma CONFIG_UPROBES is enabled by CONFIG_UPROBE_EVENTS, which gets enabled by CONFIG_FTRACE. Therefore add these configs to selftests/mm/config so that CI systems can include this config in the kernel build. To be completely safe, add CONFIG_PROFILING too, to enable the dependency chain PROFILING -> PERF_EVENTS -> UPROBE_EVENTS -> UPROBES. Fixes: efe99fabeb11b ("selftests/mm: add test about uprobe pte be orphan during vma merge") Reported-by: Aishwarya <aishwarya.tcv(a)arm.com> Closes: https://lore.kernel.org/all/20250610103729.72440-1-aishwarya.tcv@arm.com/ Tested-by: Aishwarya TCV <aishwarya.tcv(a)arm.com> Tested-by : Donet Tom <donettom(a)linux.ibm.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes(a)oracle.com> Signed-off-by: Dev Jain <dev.jain(a)arm.com> --- v1->v2: - Add CONFIG_UPROBES (Mark Brown) - Add CONFIG_PROFILING (Lorenzo) tools/testing/selftests/mm/config | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/testing/selftests/mm/config b/tools/testing/selftests/mm/config index a28baa536332..deba93379c80 100644 --- a/tools/testing/selftests/mm/config +++ b/tools/testing/selftests/mm/config @@ -8,3 +8,6 @@ CONFIG_GUP_TEST=y CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_MEM_SOFT_DIRTY=y CONFIG_ANON_VMA_NAME=y +CONFIG_FTRACE=y +CONFIG_PROFILING=y +CONFIG_UPROBES=y -- 2.30.2

1 week, 3 days

5
4
0 0

[PATCH] selftest/mm: Skip if fallocate() is unsupported in gup_longterm

by Mark Brown

Currently gup_longterm assumes that filesystems support fallocate() and uses that to allocate space in files, however this is an optional feature and is in particular not implemented by NFSv3 which is commonly used in CI systems leading to spurious failures. Check for lack of support and report a skip instead for that case. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- tools/testing/selftests/mm/gup_longterm.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/mm/gup_longterm.c b/tools/testing/selftests/mm/gup_longterm.c index 8a97ac5176a4..0e99494268ed 100644 --- a/tools/testing/selftests/mm/gup_longterm.c +++ b/tools/testing/selftests/mm/gup_longterm.c @@ -114,7 +114,15 @@ static void do_test(int fd, size_t size, enum test_type type, bool shared) } if (fallocate(fd, 0, 0, size)) { - if (size == pagesize) { + /* + * Some filesystems (eg, NFSv3) don't support + * fallocate(), report this as a skip rather than a + * test failure. + */ + if (errno == EOPNOTSUPP) { + ksft_print_msg("fallocate() not supported by filesystem\n"); + result = KSFT_SKIP; + } else if (size == pagesize) { ksft_print_msg("fallocate() failed (%s)\n", strerror(errno)); result = KSFT_FAIL; } else { --- base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494 change-id: 20250610-selftest-mm-gup-longterm-fallocate-nfs-21ef54627ef2 Best regards, -- Mark Brown <broonie(a)kernel.org>

1 week, 3 days

1
0
0 0

[PATCH net-next v2 0/7] netpoll: Untangle netconsole and netpoll

by Breno Leitao

Initially netpoll and netconsole were created together, and some functions are in the wrong file. Seperate netconsole-only functions in netconsole, avoiding exports. 1. Expose netpoll logging macros in the public header to enable consistent log formatting across netpoll consumers. 2. Relocate netconsole-specific functions from netpoll to the netconsole module where they are actually used, reducing unnecessary coupling. 3. Remove unnecessary function exports 4. Rename netpoll parsing functions in netconsole to better reflect their specific usage. 5. Create a test to check that cmdline works fine. This was in my todo list since [1], this was a good time to add it here to make sure this patchset doesn't regress. PS: The code was split in a way that it is easy to review. When copying the functions from netpoll to netconsole, I do not change than other than adding `static`. This will make checkpatch unhappy, but, further patches will address the issues. It is done this way to make it easy for reviewers. Link: https://lore.kernel.org/netdev/Z36TlACdNMwFD7wv@dev-ushankar.dev.purestorag… [1] Signed-off-by: Breno Leitao <leitao(a)debian.org> --- Changes in v2: - No change in the code. Just rebased the patches onto netnext/main - Link to v1: https://lore.kernel.org/r/20250610-rework-v1-0-7cfde283f246@debian.org --- Breno Leitao (7): netpoll: remove __netpoll_cleanup from exported API netpoll: expose netpoll logging macros in public header netpoll: relocate netconsole-specific functions to netconsole module netpoll: move netpoll_print_options to netconsole netconsole: rename functions to better reflect their purpose netconsole: improve code style in parser function selftest: netconsole: add test for cmdline configuration drivers/net/netconsole.c | 137 ++++++++++++++++++++- include/linux/netpoll.h | 10 +- net/core/netpoll.c | 136 +------------------- tools/testing/selftests/drivers/net/Makefile | 1 + .../selftests/drivers/net/lib/sh/lib_netcons.sh | 39 +++++- .../selftests/drivers/net/netcons_cmdline.sh | 52 ++++++++ 6 files changed, 228 insertions(+), 147 deletions(-) --- base-commit: 0097c4195b1d0ca57d15979626c769c74747b5a0 change-id: 20250603-rework-c175cad8d22e Best regards, -- Breno Leitao <leitao(a)debian.org>

1 week, 3 days

2
9
0 0

[PATCH v2 1/2] selftests: khugepaged: fix the shmem collapse failure

by Baolin Wang

When running the khugepaged selftest for shmem (./khugepaged all:shmem), I encountered the following test failures: " Run test: collapse_full (khugepaged:shmem) Collapse multiple fully populated PTE table.... Fail ... Run test: collapse_single_pte_entry (khugepaged:shmem) Collapse PTE table with single PTE entry present.... Fail ... Run test: collapse_full_of_compound (khugepaged:shmem) Allocate huge page... OK Split huge page leaving single PTE page table full of compound pages... OK Collapse PTE table full of compound pages.... Fail " The reason for the failure is that, it will set MADV_NOHUGEPAGE to prevent khugepaged from continuing to scan shmem VMA after khugepaged finishes scanning in the wait_for_scan() function. Moreover, shmem requires a refault to establish PMD mappings. However, after commit 2b0f922323cc ("mm: don't install PMD mappings when THPs are disabled by the hw/process/vma"), PMD mappings are prevented if the VMA is set with MADV_NOHUGEPAGE flag, so shmem cannot establish PMD mappings during refault. One way to fix this issue is to move the MADV_NOHUGEPAGE setting after the shmem refault. After shmem refault and check huge, the test case will unmap the shmem immediately. So it seems unnecessary to set the MADV_NOHUGEPAGE. Then we can simply drop the MADV_NOHUGEPAGE setting, and all khugepaged test cases passed. Fixes: 2b0f922323cc ("mm: don't install PMD mappings when THPs are disabled by the hw/process/vma") Reviewed-by: Zi Yan <ziy(a)nvidia.com> Signed-off-by: Baolin Wang <baolin.wang(a)linux.alibaba.com> --- Changes from v1: - Add reviewed tag from Zi. Thanks. - Drop the MADV_NOHUGEPAGE setting, per David. --- tools/testing/selftests/mm/khugepaged.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/tools/testing/selftests/mm/khugepaged.c b/tools/testing/selftests/mm/khugepaged.c index 8a4d34cce36b..4341ce6b3b38 100644 --- a/tools/testing/selftests/mm/khugepaged.c +++ b/tools/testing/selftests/mm/khugepaged.c @@ -561,8 +561,6 @@ static bool wait_for_scan(const char *msg, char *p, int nr_hpages, usleep(TICK); } - madvise(p, nr_hpages * hpage_pmd_size, MADV_NOHUGEPAGE); - return timeout == -1; } -- 2.43.5

1 week, 3 days

3
3
0 0

[PATCH v4 00/14] kselftest harness and nolibc compatibility

by Thomas Weißschuh

Nolibc is useful for selftests as the test programs can be very small, and compiled with just a kernel crosscompiler, without userspace support. Currently nolibc is only usable with kselftest.h, not the more convenient to use kselftest_harness.h This series provides this compatibility by removing the usage of problematic libc features from the harness. Based on nolibc/for-next. The series is meant to be merged through the nolibc tree. Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> --- Changes in v4: - Drop patches for nolibc which where already applied - Preserve signatures of test functions for tests making assumptions about them drop 'selftests: harness: Always provide "self" and "variant"' add 'selftests: harness: Add "variant" and "self" to test metadata' adapt 'selftests: harness: Stop using setjmp()/longjmp()' - Validate test function signatures in harness selftest - Link to v3: https://lore.kernel.org/r/20250411-nolibc-kselftest-harness-v3-0-4d9c029589… Changes in v3: - Send patches to correct kselftest harness maintainers - Move harness selftest to dedicated directory - Add harness selftest to MAINTAINERS - Integrate harness selftest cleanup with the selftest framework - Consistently use "kselftest harness" in commit messages - Properly propagate kselftest harness failure - Link to v2: https://lore.kernel.org/r/20250407-nolibc-kselftest-harness-v2-0-f8812f76e9… Changes in v2: - Rebase unto v6.15-rc1 - Rename internal nolibc symbols - Handle edge case of waitpid(INT_MIN) == ESRCH - Fix arm configurations for final testing patch - Clean up global getopt.h variable declarations - Add Acks from Willy - Link to v1: https://lore.kernel.org/r/20250304-nolibc-kselftest-harness-v1-0-adca7cd231… --- Thomas Weißschuh (14): selftests: harness: Add kselftest harness selftest selftests: harness: Use C89 comment style selftests: harness: Ignore unused variant argument warning selftests: harness: Mark functions without prototypes static selftests: harness: Remove inline qualifier for wrappers selftests: harness: Remove dependency on libatomic selftests: harness: Implement test timeouts through pidfd selftests: harness: Don't set setup_completed for fixtureless tests selftests: harness: Move teardown conditional into test metadata selftests: harness: Add teardown callback to test metadata selftests: harness: Add "variant" and "self" to test metadata selftests: harness: Stop using setjmp()/longjmp() selftests: harness: Guard includes on nolibc HACK: selftests/nolibc: demonstrate usage of the kselftest harness MAINTAINERS | 1 + tools/testing/selftests/Makefile | 1 + tools/testing/selftests/kselftest_harness.h | 175 +- .../testing/selftests/kselftest_harness/.gitignore | 2 + tools/testing/selftests/kselftest_harness/Makefile | 7 + .../selftests/kselftest_harness/harness-selftest.c | 138 ++ .../kselftest_harness/harness-selftest.expected | 64 + .../kselftest_harness/harness-selftest.sh | 13 + tools/testing/selftests/nolibc/Makefile | 15 +- tools/testing/selftests/nolibc/harness-selftest.c | 1 + tools/testing/selftests/nolibc/nolibc-test.c | 1715 +------------------- tools/testing/selftests/nolibc/run-tests.sh | 2 +- 12 files changed, 313 insertions(+), 1821 deletions(-) --- base-commit: 2051d3b830c0889ae55e37e9e8ff0d43a4acd482 change-id: 20250130-nolibc-kselftest-harness-8b2c8cac43bf Best regards, -- Thomas Weißschuh <thomas.weissschuh(a)linutronix.de>

1 week, 3 days

6
45
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror June 2025