August 2024 - Linux-kselftest-mirror

[PATCH net-next v2] net: netconsole: selftests: Create a new netconsole selftest

by Breno Leitao

Adds a selftest that creates two virtual interfaces, assigns one to a new namespace, and assigns IP addresses to both. It listens on the destination interface using socat and configures a dynamic target on netconsole, pointing to the destination IP address. The test then checks if the message was received properly on the destination interface. Signed-off-by: Breno Leitao <leitao(a)debian.org> --- Changelog: v2: * Change the location of the path (Jakub) * Move from veth to netdevsim * Other small changes in dependency checks and cleanup v1: * https://lore.kernel.org/all/ZqyUHN770pjSofTC@gmail.com/ MAINTAINERS | 1 + tools/testing/selftests/drivers/net/Makefile | 1 + .../selftests/drivers/net/netcons_basic.sh | 223 ++++++++++++++++++ 3 files changed, 225 insertions(+) create mode 100755 tools/testing/selftests/drivers/net/netcons_basic.sh diff --git a/MAINTAINERS b/MAINTAINERS index a9dace908305..ded45f1dff7e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15770,6 +15770,7 @@ M: Breno Leitao <leitao(a)debian.org> S: Maintained F: Documentation/networking/netconsole.rst F: drivers/net/netconsole.c +F: tools/testing/selftests/drivers/net/netcons_basic.sh NETDEVSIM M: Jakub Kicinski <kuba(a)kernel.org> diff --git a/tools/testing/selftests/drivers/net/Makefile b/tools/testing/selftests/drivers/net/Makefile index e54f382bcb02..928530b26abc 100644 --- a/tools/testing/selftests/drivers/net/Makefile +++ b/tools/testing/selftests/drivers/net/Makefile @@ -3,6 +3,7 @@ TEST_INCLUDES := $(wildcard lib/py/*.py) TEST_PROGS := \ + netcons_basic.sh \ ping.py \ queues.py \ stats.py \ diff --git a/tools/testing/selftests/drivers/net/netcons_basic.sh b/tools/testing/selftests/drivers/net/netcons_basic.sh new file mode 100755 index 000000000000..e0e58fc7e89f --- /dev/null +++ b/tools/testing/selftests/drivers/net/netcons_basic.sh @@ -0,0 +1,223 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-2.0 + +# This test creates two netdevsim virtual interfaces, assigns one of them (the +# "destination interface") to a new namespace, and assigns IP addresses to both +# interfaces. +# +# It listens on the destination interface using socat and configures a dynamic +# target on netconsole, pointing to the destination IP address. +# +# Finally, it checks whether the message was received properly on the +# destination interface. Note that this test may pollute the kernel log buffer +# (dmesg) and relies on dynamic configuration and namespaces being configured. +# +# Author: Breno Leitao <leitao(a)debian.org> + +set -euo pipefail + +SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")") + +# Simple script to test dynamic targets in netconsole +SRCIF="" # to be populated later +SRCIP=192.168.1.1 +DSTIF="" # to be populated later +DSTIP=192.168.1.2 + +PORT="6666" +MSG="netconsole selftest" +TARGET=$(mktemp -u netcons_XXXXX) +NETCONS_CONFIGFS="/sys/kernel/config/netconsole" +NETCONS_PATH="${NETCONS_CONFIGFS}"/"${TARGET}" +# This will have some tmp values appended to it in set_network() +NAMESPACE="netconsns_dst" + +# IDs for netdevsim +NSIM_DEV_1_ID=$((256 + RANDOM % 256)) +NSIM_DEV_2_ID=$((512 + RANDOM % 256)) + +# Used to create and delete namespaces +source "${SCRIPTDIR}"/../../net/lib.sh + +# Create netdevsim interfaces +create_ifaces() { + local NSIM_DEV_SYS_NEW=/sys/bus/netdevsim/new_device + + echo "$NSIM_DEV_2_ID" > "$NSIM_DEV_SYS_NEW" + echo "$NSIM_DEV_1_ID" > "$NSIM_DEV_SYS_NEW" + udevadm settle || true + + local NSIM_DEV_1_SYS=/sys/bus/netdevsim/devices/netdevsim"$NSIM_DEV_1_ID" + local NSIM_DEV_2_SYS=/sys/bus/netdevsim/devices/netdevsim"$NSIM_DEV_2_ID" + + # These are global variables + SRCIF=$(find "$NSIM_DEV_1_SYS"/net -maxdepth 1 -type d ! \ + -path "$NSIM_DEV_1_SYS"/net -exec basename {} \;) + DSTIF=$(find "$NSIM_DEV_2_SYS"/net -maxdepth 1 -type d ! \ + -path "$NSIM_DEV_2_SYS"/net -exec basename {} \;) +} + +link_ifaces() { + local NSIM_DEV_SYS_LINK="/sys/bus/netdevsim/link_device" + local SRCIF_IFIDX=$(cat /sys/class/net/"$SRCIF"/ifindex) + local DSTIF_IFIDX=$(cat /sys/class/net/"$DSTIF"/ifindex) + + exec {NAMESPACE_FD}</var/run/netns/"${NAMESPACE}" + exec {INITNS_FD}</proc/self/ns/net + + # Bind the dst interface to namespace + ip link set "${DSTIF}" netns "${NAMESPACE}" + + # Linking one device to the other one (on the other namespace} + echo "${INITNS_FD}:$SRCIF_IFIDX $NAMESPACE_FD:$DSTIF_IFIDX" > $NSIM_DEV_SYS_LINK + if [ $? -ne 0 ]; then + echo "linking netdevsim1 with netdevsim2 should succeed" + cleanup + exit ${ksft_skip} + fi +} + +function configure_ip() { + # Configure the IPs for both interfaces + ip netns exec "${NAMESPACE}" ip addr add "${DSTIP}"/24 dev "${DSTIF}" + ip netns exec "${NAMESPACE}" ip link set "${DSTIF}" up + + ip addr add "${SRCIP}"/24 dev "${SRCIF}" + ip link set "${SRCIF}" up +} + +function set_network() { + # This is coming from lib.sh. And it does unbound variable access + set +u + setup_ns "${NAMESPACE}" + set -u + NAMESPACE=${NS_LIST[0]} + + # Create both interfaces, and assign the destination to a different namespace + create_ifaces + + # Link both interfaces back to back + link_ifaces + + configure_ip +} + +function create_dynamic_target() { + DSTMAC=$(ip netns exec "${NAMESPACE}" ip link show "${DSTIF}" | awk '/ether/ {print $2}') + + # Create a dynamic target + mkdir "${NETCONS_PATH}" + + echo "${DSTIP}" > "${NETCONS_PATH}"/remote_ip + echo "${SRCIP}" > "${NETCONS_PATH}"/local_ip + echo "${DSTMAC}" > "${NETCONS_PATH}"/remote_mac + echo "${SRCIF}" > "${NETCONS_PATH}"/dev_name + + echo 1 > "${NETCONS_PATH}"/enabled +} + +function cleanup() { + local NSIM_DEV_SYS_DEL="/sys/bus/netdevsim/del_device" + + # delete netconsole dynamic reconfiguration + echo 0 > "${NETCONS_PATH}"/enabled + # Remove the configfs entry + rmdir "${NETCONS_PATH}" + + # Delete netdevsim devices + echo "$NSIM_DEV_2_ID" > "$NSIM_DEV_SYS_DEL" + echo "$NSIM_DEV_1_ID" > "$NSIM_DEV_SYS_DEL" + + # this is coming from lib.sh + cleanup_all_ns +} + +function listen_port_and_save_to() { + OUTPUT=${1} + # Just wait for 2 seconds + timeout 2 ip netns exec "${NAMESPACE}" socat UDP-LISTEN:"${PORT}",fork "${OUTPUT}" +} + +function validate_result() { + TMPFILENAME="$1" + + # Check if the file exists + if [ ! -f "$TMPFILENAME" ]; then + echo "FAIL: File was not generated." >&2 + return ${ksft_fail} + fi + + if ! grep -q "${MSG}" "${TMPFILENAME}"; then + echo "FAIL: ${MSG} not found in ${TMPFILENAME}" >&2 + cat "${TMPFILENAME}" >&2 + return ${ksft_fail} + fi + + # Delete the file once it is validated, otherwise keep it + # for debugging purposes + rm "${TMPFILENAME}" + return ${ksft_pass} +} + +function check_for_dependencies() { + if [ "$(id -u)" -ne 0 ]; then + echo "This script must be run as root" >&2 + exit "${ksft_skip}" + fi + + if ! which socat > /dev/null ; then + echo "SKIP: socat(1) is not available" >&2 + exit "${ksft_skip}" + fi + + if ! which ip > /dev/null ; then + echo "SKIP: ip(1) is not available" >&2 + exit "${ksft_skip}" + fi + + if ! which udevadm > /dev/null ; then + echo "SKIP: udevadm(1) is not available" >&2 + exit "${ksft_skip}" + fi + + if [ ! -d "${NETCONS_CONFIGFS}" ]; then + echo "SKIP: directory ${NETCONS_CONFIGFS} does not exist. Check if NETCONSOLE_DYNAMIC is enabled" >&2 + exit "${ksft_skip}" + fi + + if ip link show "${DSTIF}" 2> /dev/null; then + echo "SKIP: interface ${DSTIF} exists in the system. Not overwriting it." + exit "${ksft_skip}" + fi +} + +# ========== # +# Start here # +# ========== # +modprobe netdevsim || true +# The content of kmsg will be save to the following file +OUTPUT_FILE="/tmp/${TARGET}" + +# Check for basic system dependency and exit if not found +check_for_dependencies +# Remove the namespace, interfaces and netconsole target on exit +trap cleanup EXIT +# Create one namespace and two interfaces +set_network +# Create a dynamic target for netconsole +create_dynamic_target +# Listed for netconsole port inside the namespace and destination interface +listen_port_and_save_to "${OUTPUT_FILE}" & + +# Wait for socat to start and listen to the port. +sleep 1 +# Send the message +echo "${MSG}: ${TARGET}" > /dev/kmsg +# Wait until socat saves the file to disk +sleep 1 + +# Make sure the message was received in the dst part +validate_result "${OUTPUT_FILE}" +ret=$? + +exit ${ret} -- 2.43.5

1 year, 4 months

5
7
0 0

[PATCH net v3] selftest: af_unix: Fix kselftest compilation warnings

by Abhinav Jain

Change expected_buf from (const void *) to (const char *) in function __recvpair(). This change fixes the below warnings during test compilation: ``` In file included from msg_oob.c:14: msg_oob.c: In function ‘__recvpair’: ../../kselftest_harness.h:106:40: warning: format ‘%s’ expects argument of type ‘char *’,but argument 6 has type ‘const void *’ [-Wformat=] ../../kselftest_harness.h:101:17: note: in expansion of macro ‘__TH_LOG’ msg_oob.c:235:17: note: in expansion of macro ‘TH_LOG’ ../../kselftest_harness.h:106:40: warning: format ‘%s’ expects argument of type ‘char *’,but argument 6 has type ‘const void *’ [-Wformat=] ../../kselftest_harness.h:101:17: note: in expansion of macro ‘__TH_LOG’ msg_oob.c:259:25: note: in expansion of macro ‘TH_LOG’ ``` Fixes: d098d77232c3 ("selftest: af_unix: Add msg_oob.c.") Signed-off-by: Abhinav Jain <jain.abhinav177(a)gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu(a)amazon.com> --- v2: https://lore.kernel.org/all/20240812191122.1092806-1-jain.abhinav177@gmail.… - Change the parameter expected_buf from (const void *) to (const char *) in the function __recvpair() as per the feedback in v1. - Add Fixes tag as per feedback in v1. v1: https://lore.kernel.org/netdev/20240810134037.669765-1-jain.abhinav177@gmai… --- tools/testing/selftests/net/af_unix/msg_oob.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/af_unix/msg_oob.c b/tools/testing/selftests/net/af_unix/msg_oob.c index 16d0c172eaeb..535eb2c3d7d1 100644 --- a/tools/testing/selftests/net/af_unix/msg_oob.c +++ b/tools/testing/selftests/net/af_unix/msg_oob.c @@ -209,7 +209,7 @@ static void __sendpair(struct __test_metadata *_metadata, static void __recvpair(struct __test_metadata *_metadata, FIXTURE_DATA(msg_oob) *self, - const void *expected_buf, int expected_len, + const char *expected_buf, int expected_len, int buf_len, int flags) { int i, ret[2], recv_errno[2], expected_errno = 0; -- 2.34.1

1 year, 4 months

2
1
0 0

Re: [PATCH] arm64/vdso: Remove --hash-style=sysv

by Xi Ruoyao

On Thu, 2024-07-18 at 10:34 -0700, Fangrui Song wrote: > glibc added support for .gnu.hash in 2006 and .hash has been obsoleted > for more than one decade in many Linux distributions. Using > --hash-style=sysv might imply unaddressed issues and confuse readers. > > Just drop the option and rely on the linker default, which is likely > "both", or "gnu" when the distribution really wants to eliminate sysv > hash overhead. > > Similar to commit 6b7e26547fad ("x86/vdso: Emit a GNU hash"). > > Signed-off-by: Fangrui Song <maskray(a)google.com> Hi Fangrui, If I read tools/testing/selftests/vDSO/parse_vdso.c correctly, it does know DT_GNU_HASH as at now. Thus after this change the vDSO selftests are skipped with "Couldn't find __vdso_gettimeofday" etc if the distro enables --hash-style=gnu by default. So it seems we need to add DT_GNU_HASH support for parse_vdso.c to keep test coverage. > --- > arch/arm64/kernel/vdso/Makefile | 2 +- > arch/arm64/kernel/vdso32/Makefile | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile > index d63930c82839..d11da6461278 100644 > --- a/arch/arm64/kernel/vdso/Makefile > +++ b/arch/arm64/kernel/vdso/Makefile > @@ -21,7 +21,7 @@ btildflags-$(CONFIG_ARM64_BTI_KERNEL) += -z force-bti > # potential future proofing if we end up with internal calls to the exported > # routines, as x86 does (see 6f121e548f83 ("x86, vdso: Reimplement vdso.so > # preparation in build-time C")). > -ldflags-y := -shared -soname=linux-vdso.so.1 --hash-style=sysv \ > +ldflags-y := -shared -soname=linux-vdso.so.1 \ > -Bsymbolic --build-id=sha1 -n $(btildflags-y) > > ifdef CONFIG_LD_ORPHAN_WARN > diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile > index cc4508c604b2..25a2cb6317f3 100644 > --- a/arch/arm64/kernel/vdso32/Makefile > +++ b/arch/arm64/kernel/vdso32/Makefile > @@ -98,7 +98,7 @@ VDSO_AFLAGS += -D__ASSEMBLY__ > # From arm vDSO Makefile > VDSO_LDFLAGS += -Bsymbolic --no-undefined -soname=linux-vdso.so.1 > VDSO_LDFLAGS += -z max-page-size=4096 -z common-page-size=4096 > -VDSO_LDFLAGS += -shared --hash-style=sysv --build-id=sha1 > +VDSO_LDFLAGS += -shared --build-id=sha1 > VDSO_LDFLAGS += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL) > > -- Xi Ruoyao <xry111(a)xry111.site> School of Aerospace Science and Technology, Xidian University

1 year, 4 months

2
2
0 0

[PATCH net-next v13 02/14] mm: move the page fragment allocator from page_alloc into its own file

by Yunsheng Lin

Inspired by [1], move the page fragment allocator from page_alloc into its own c file and header file, as we are about to make more change for it to replace another page_frag implementation in sock.c As this patchset is going to replace 'struct page_frag' with 'struct page_frag_cache' in sched.h, including page_frag_cache.h in sched.h has a compiler error caused by interdependence between mm_types.h and mm.h for asm-offsets.c, see [2]. So avoid the compiler error by moving 'struct page_frag_cache' to mm_types_task.h as suggested by Alexander, see [3]. 1. https://lore.kernel.org/all/20230411160902.4134381-3-dhowells@redhat.com/ 2. https://lore.kernel.org/all/15623dac-9358-4597-b3ee-3694a5956920@gmail.com/ 3. https://lore.kernel.org/all/CAKgT0UdH1yD=LSCXFJ=YM_aiA4OomD-2wXykO42bizaWMt… CC: David Howells <dhowells(a)redhat.com> CC: Alexander Duyck <alexander.duyck(a)gmail.com> Signed-off-by: Yunsheng Lin <linyunsheng(a)huawei.com> --- include/linux/gfp.h | 22 --- include/linux/mm_types.h | 18 --- include/linux/mm_types_task.h | 18 +++ include/linux/page_frag_cache.h | 31 ++++ include/linux/skbuff.h | 1 + mm/Makefile | 1 + mm/page_alloc.c | 136 ---------------- mm/page_frag_cache.c | 145 ++++++++++++++++++ .../selftests/mm/page_frag/page_frag_test.c | 2 +- 9 files changed, 197 insertions(+), 177 deletions(-) create mode 100644 include/linux/page_frag_cache.h create mode 100644 mm/page_frag_cache.c diff --git a/include/linux/gfp.h b/include/linux/gfp.h index f53f76e0b17e..01a49be7c98d 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -371,28 +371,6 @@ __meminit void *alloc_pages_exact_nid_noprof(int nid, size_t size, gfp_t gfp_mas extern void __free_pages(struct page *page, unsigned int order); extern void free_pages(unsigned long addr, unsigned int order); -struct page_frag_cache; -void page_frag_cache_drain(struct page_frag_cache *nc); -extern void __page_frag_cache_drain(struct page *page, unsigned int count); -void *__page_frag_alloc_align(struct page_frag_cache *nc, unsigned int fragsz, - gfp_t gfp_mask, unsigned int align_mask); - -static inline void *page_frag_alloc_align(struct page_frag_cache *nc, - unsigned int fragsz, gfp_t gfp_mask, - unsigned int align) -{ - WARN_ON_ONCE(!is_power_of_2(align)); - return __page_frag_alloc_align(nc, fragsz, gfp_mask, -align); -} - -static inline void *page_frag_alloc(struct page_frag_cache *nc, - unsigned int fragsz, gfp_t gfp_mask) -{ - return __page_frag_alloc_align(nc, fragsz, gfp_mask, ~0u); -} - -extern void page_frag_free(void *addr); - #define __free_page(page) __free_pages((page), 0) #define free_page(addr) free_pages((addr), 0) diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 485424979254..843d75412105 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -521,9 +521,6 @@ static_assert(sizeof(struct ptdesc) <= sizeof(struct page)); */ #define STRUCT_PAGE_MAX_SHIFT (order_base_2(sizeof(struct page))) -#define PAGE_FRAG_CACHE_MAX_SIZE __ALIGN_MASK(32768, ~PAGE_MASK) -#define PAGE_FRAG_CACHE_MAX_ORDER get_order(PAGE_FRAG_CACHE_MAX_SIZE) - /* * page_private can be used on tail pages. However, PagePrivate is only * checked by the VM on the head page. So page_private on the tail pages @@ -542,21 +539,6 @@ static inline void *folio_get_private(struct folio *folio) return folio->private; } -struct page_frag_cache { - void * va; -#if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE) - __u16 offset; - __u16 size; -#else - __u32 offset; -#endif - /* we maintain a pagecount bias, so that we dont dirty cache line - * containing page->_refcount every time we allocate a fragment. - */ - unsigned int pagecnt_bias; - bool pfmemalloc; -}; - typedef unsigned long vm_flags_t; /* diff --git a/include/linux/mm_types_task.h b/include/linux/mm_types_task.h index a2f6179b672b..cdc1e3696439 100644 --- a/include/linux/mm_types_task.h +++ b/include/linux/mm_types_task.h @@ -8,6 +8,7 @@ * (These are defined separately to decouple sched.h from mm_types.h as much as possible.) */ +#include <linux/align.h> #include <linux/types.h> #include <asm/page.h> @@ -46,6 +47,23 @@ struct page_frag { #endif }; +#define PAGE_FRAG_CACHE_MAX_SIZE __ALIGN_MASK(32768, ~PAGE_MASK) +#define PAGE_FRAG_CACHE_MAX_ORDER get_order(PAGE_FRAG_CACHE_MAX_SIZE) +struct page_frag_cache { + void *va; +#if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE) + __u16 offset; + __u16 size; +#else + __u32 offset; +#endif + /* we maintain a pagecount bias, so that we dont dirty cache line + * containing page->_refcount every time we allocate a fragment. + */ + unsigned int pagecnt_bias; + bool pfmemalloc; +}; + /* Track pages that require TLB flushes */ struct tlbflush_unmap_batch { #ifdef CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH diff --git a/include/linux/page_frag_cache.h b/include/linux/page_frag_cache.h new file mode 100644 index 000000000000..a758cb65a9b3 --- /dev/null +++ b/include/linux/page_frag_cache.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _LINUX_PAGE_FRAG_CACHE_H +#define _LINUX_PAGE_FRAG_CACHE_H + +#include <linux/log2.h> +#include <linux/types.h> +#include <linux/mm_types_task.h> + +void page_frag_cache_drain(struct page_frag_cache *nc); +void __page_frag_cache_drain(struct page *page, unsigned int count); +void *__page_frag_alloc_align(struct page_frag_cache *nc, unsigned int fragsz, + gfp_t gfp_mask, unsigned int align_mask); + +static inline void *page_frag_alloc_align(struct page_frag_cache *nc, + unsigned int fragsz, gfp_t gfp_mask, + unsigned int align) +{ + WARN_ON_ONCE(!is_power_of_2(align)); + return __page_frag_alloc_align(nc, fragsz, gfp_mask, -align); +} + +static inline void *page_frag_alloc(struct page_frag_cache *nc, + unsigned int fragsz, gfp_t gfp_mask) +{ + return __page_frag_alloc_align(nc, fragsz, gfp_mask, ~0u); +} + +void page_frag_free(void *addr); + +#endif diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index cf8f6ce06742..7482997c719f 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -31,6 +31,7 @@ #include <linux/in6.h> #include <linux/if_packet.h> #include <linux/llist.h> +#include <linux/page_frag_cache.h> #include <net/flow.h> #if IS_ENABLED(CONFIG_NF_CONNTRACK) #include <linux/netfilter/nf_conntrack_common.h> diff --git a/mm/Makefile b/mm/Makefile index d2915f8c9dc0..e9d342fa8058 100644 --- a/mm/Makefile +++ b/mm/Makefile @@ -65,6 +65,7 @@ page-alloc-$(CONFIG_SHUFFLE_PAGE_ALLOCATOR) += shuffle.o memory-hotplug-$(CONFIG_MEMORY_HOTPLUG) += memory_hotplug.o obj-y += page-alloc.o +obj-y += page_frag_cache.o obj-y += init-mm.o obj-y += memblock.o obj-y += $(memory-hotplug-y) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 28f80daf5c04..7e830613da1b 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -4803,142 +4803,6 @@ void free_pages(unsigned long addr, unsigned int order) EXPORT_SYMBOL(free_pages); -/* - * Page Fragment: - * An arbitrary-length arbitrary-offset area of memory which resides - * within a 0 or higher order page. Multiple fragments within that page - * are individually refcounted, in the page's reference counter. - * - * The page_frag functions below provide a simple allocation framework for - * page fragments. This is used by the network stack and network device - * drivers to provide a backing region of memory for use as either an - * sk_buff->head, or to be used in the "frags" portion of skb_shared_info. - */ -static struct page *__page_frag_cache_refill(struct page_frag_cache *nc, - gfp_t gfp_mask) -{ - struct page *page = NULL; - gfp_t gfp = gfp_mask; - -#if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE) - gfp_mask = (gfp_mask & ~__GFP_DIRECT_RECLAIM) | __GFP_COMP | - __GFP_NOWARN | __GFP_NORETRY | __GFP_NOMEMALLOC; - page = alloc_pages_node(NUMA_NO_NODE, gfp_mask, - PAGE_FRAG_CACHE_MAX_ORDER); - nc->size = page ? PAGE_FRAG_CACHE_MAX_SIZE : PAGE_SIZE; -#endif - if (unlikely(!page)) - page = alloc_pages_node(NUMA_NO_NODE, gfp, 0); - - nc->va = page ? page_address(page) : NULL; - - return page; -} - -void page_frag_cache_drain(struct page_frag_cache *nc) -{ - if (!nc->va) - return; - - __page_frag_cache_drain(virt_to_head_page(nc->va), nc->pagecnt_bias); - nc->va = NULL; -} -EXPORT_SYMBOL(page_frag_cache_drain); - -void __page_frag_cache_drain(struct page *page, unsigned int count) -{ - VM_BUG_ON_PAGE(page_ref_count(page) == 0, page); - - if (page_ref_sub_and_test(page, count)) - free_unref_page(page, compound_order(page)); -} -EXPORT_SYMBOL(__page_frag_cache_drain); - -void *__page_frag_alloc_align(struct page_frag_cache *nc, - unsigned int fragsz, gfp_t gfp_mask, - unsigned int align_mask) -{ - unsigned int size = PAGE_SIZE; - struct page *page; - int offset; - - if (unlikely(!nc->va)) { -refill: - page = __page_frag_cache_refill(nc, gfp_mask); - if (!page) - return NULL; - -#if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE) - /* if size can vary use size else just use PAGE_SIZE */ - size = nc->size; -#endif - /* Even if we own the page, we do not use atomic_set(). - * This would break get_page_unless_zero() users. - */ - page_ref_add(page, PAGE_FRAG_CACHE_MAX_SIZE); - - /* reset page count bias and offset to start of new frag */ - nc->pfmemalloc = page_is_pfmemalloc(page); - nc->pagecnt_bias = PAGE_FRAG_CACHE_MAX_SIZE + 1; - nc->offset = size; - } - - offset = nc->offset - fragsz; - if (unlikely(offset < 0)) { - page = virt_to_page(nc->va); - - if (!page_ref_sub_and_test(page, nc->pagecnt_bias)) - goto refill; - - if (unlikely(nc->pfmemalloc)) { - free_unref_page(page, compound_order(page)); - goto refill; - } - -#if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE) - /* if size can vary use size else just use PAGE_SIZE */ - size = nc->size; -#endif - /* OK, page count is 0, we can safely set it */ - set_page_count(page, PAGE_FRAG_CACHE_MAX_SIZE + 1); - - /* reset page count bias and offset to start of new frag */ - nc->pagecnt_bias = PAGE_FRAG_CACHE_MAX_SIZE + 1; - offset = size - fragsz; - if (unlikely(offset < 0)) { - /* - * The caller is trying to allocate a fragment - * with fragsz > PAGE_SIZE but the cache isn't big - * enough to satisfy the request, this may - * happen in low memory conditions. - * We don't release the cache page because - * it could make memory pressure worse - * so we simply return NULL here. - */ - return NULL; - } - } - - nc->pagecnt_bias--; - offset &= align_mask; - nc->offset = offset; - - return nc->va + offset; -} -EXPORT_SYMBOL(__page_frag_alloc_align); - -/* - * Frees a page fragment allocated out of either a compound or order 0 page. - */ -void page_frag_free(void *addr) -{ - struct page *page = virt_to_head_page(addr); - - if (unlikely(put_page_testzero(page))) - free_unref_page(page, compound_order(page)); -} -EXPORT_SYMBOL(page_frag_free); - static void *make_alloc_exact(unsigned long addr, unsigned int order, size_t size) { diff --git a/mm/page_frag_cache.c b/mm/page_frag_cache.c new file mode 100644 index 000000000000..609a485cd02a --- /dev/null +++ b/mm/page_frag_cache.c @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Page fragment allocator + * + * Page Fragment: + * An arbitrary-length arbitrary-offset area of memory which resides within a + * 0 or higher order page. Multiple fragments within that page are + * individually refcounted, in the page's reference counter. + * + * The page_frag functions provide a simple allocation framework for page + * fragments. This is used by the network stack and network device drivers to + * provide a backing region of memory for use as either an sk_buff->head, or to + * be used in the "frags" portion of skb_shared_info. + */ + +#include <linux/export.h> +#include <linux/gfp_types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/page_frag_cache.h> +#include "internal.h" + +static struct page *__page_frag_cache_refill(struct page_frag_cache *nc, + gfp_t gfp_mask) +{ + struct page *page = NULL; + gfp_t gfp = gfp_mask; + +#if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE) + gfp_mask = (gfp_mask & ~__GFP_DIRECT_RECLAIM) | __GFP_COMP | + __GFP_NOWARN | __GFP_NORETRY | __GFP_NOMEMALLOC; + page = alloc_pages_node(NUMA_NO_NODE, gfp_mask, + PAGE_FRAG_CACHE_MAX_ORDER); + nc->size = page ? PAGE_FRAG_CACHE_MAX_SIZE : PAGE_SIZE; +#endif + if (unlikely(!page)) + page = alloc_pages_node(NUMA_NO_NODE, gfp, 0); + + nc->va = page ? page_address(page) : NULL; + + return page; +} + +void page_frag_cache_drain(struct page_frag_cache *nc) +{ + if (!nc->va) + return; + + __page_frag_cache_drain(virt_to_head_page(nc->va), nc->pagecnt_bias); + nc->va = NULL; +} +EXPORT_SYMBOL(page_frag_cache_drain); + +void __page_frag_cache_drain(struct page *page, unsigned int count) +{ + VM_BUG_ON_PAGE(page_ref_count(page) == 0, page); + + if (page_ref_sub_and_test(page, count)) + free_unref_page(page, compound_order(page)); +} +EXPORT_SYMBOL(__page_frag_cache_drain); + +void *__page_frag_alloc_align(struct page_frag_cache *nc, + unsigned int fragsz, gfp_t gfp_mask, + unsigned int align_mask) +{ + unsigned int size = PAGE_SIZE; + struct page *page; + int offset; + + if (unlikely(!nc->va)) { +refill: + page = __page_frag_cache_refill(nc, gfp_mask); + if (!page) + return NULL; + +#if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE) + /* if size can vary use size else just use PAGE_SIZE */ + size = nc->size; +#endif + /* Even if we own the page, we do not use atomic_set(). + * This would break get_page_unless_zero() users. + */ + page_ref_add(page, PAGE_FRAG_CACHE_MAX_SIZE); + + /* reset page count bias and offset to start of new frag */ + nc->pfmemalloc = page_is_pfmemalloc(page); + nc->pagecnt_bias = PAGE_FRAG_CACHE_MAX_SIZE + 1; + nc->offset = size; + } + + offset = nc->offset - fragsz; + if (unlikely(offset < 0)) { + page = virt_to_page(nc->va); + + if (!page_ref_sub_and_test(page, nc->pagecnt_bias)) + goto refill; + + if (unlikely(nc->pfmemalloc)) { + free_unref_page(page, compound_order(page)); + goto refill; + } + +#if (PAGE_SIZE < PAGE_FRAG_CACHE_MAX_SIZE) + /* if size can vary use size else just use PAGE_SIZE */ + size = nc->size; +#endif + /* OK, page count is 0, we can safely set it */ + set_page_count(page, PAGE_FRAG_CACHE_MAX_SIZE + 1); + + /* reset page count bias and offset to start of new frag */ + nc->pagecnt_bias = PAGE_FRAG_CACHE_MAX_SIZE + 1; + offset = size - fragsz; + if (unlikely(offset < 0)) { + /* + * The caller is trying to allocate a fragment + * with fragsz > PAGE_SIZE but the cache isn't big + * enough to satisfy the request, this may + * happen in low memory conditions. + * We don't release the cache page because + * it could make memory pressure worse + * so we simply return NULL here. + */ + return NULL; + } + } + + nc->pagecnt_bias--; + offset &= align_mask; + nc->offset = offset; + + return nc->va + offset; +} +EXPORT_SYMBOL(__page_frag_alloc_align); + +/* + * Frees a page fragment allocated out of either a compound or order 0 page. + */ +void page_frag_free(void *addr) +{ + struct page *page = virt_to_head_page(addr); + + if (unlikely(put_page_testzero(page))) + free_unref_page(page, compound_order(page)); +} +EXPORT_SYMBOL(page_frag_free); diff --git a/tools/testing/selftests/mm/page_frag/page_frag_test.c b/tools/testing/selftests/mm/page_frag/page_frag_test.c index 0e803db1ad79..4a009122991e 100644 --- a/tools/testing/selftests/mm/page_frag/page_frag_test.c +++ b/tools/testing/selftests/mm/page_frag/page_frag_test.c @@ -6,12 +6,12 @@ * Copyright: linyunsheng(a)huawei.com */ -#include <linux/mm.h> #include <linux/module.h> #include <linux/cpumask.h> #include <linux/completion.h> #include <linux/ptr_ring.h> #include <linux/kthread.h> +#include <linux/page_frag_cache.h> static struct ptr_ring ptr_ring; static int nr_objs = 512; -- 2.33.0

1 year, 4 months

3
2
0 0

[PATCH net-next v19 00/13] Device Memory TCP

by Mina Almasry

v19: https://patchwork.kernel.org/project/netdevbpf/list/?series=876852&state=* ==== v18 got a thorough review (thanks!), and this iteration addresses the feedback. Major changes: - Prevent deactivating mp bound queues. - Prevent installing xdp on mp bound netdevs, or installing mps on xdp installed netdevs. - Fix corner cases in netlink API vis-a-vis missing attributes. - Iron out the unreadable netmem driver support story. To be honest, the conversation with Jakub & Pavel got a bit confusing for me. I've implemented an approach in this set that makes sense to me, and AFAICT, addresses the requirements. It may be good as-is, or it may be a conversation starter/continuer. To be honest IMO there are many ways to skin this cat and I don't see an extremely strong reason to go for one approach over another. Here is one approach you may like. - Don't reset niov dma_addr on allocation & free. - Add some tests to the selftest that catches some of the issues around missing netlink attributes or deactivating mp-bound queues. Full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v19/ v18: https://patchwork.kernel.org/project/netdevbpf/list/?series=874848&state=* ==== v17 got minor feedback: (a) to beef up the description on patch 1 and (b) to remove the leading underscores in the header definition. I applied (a). (b) seems to be against current conventions so I did not apply before further discussion. Full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v17/ v17: https://patchwork.kernel.org/project/netdevbpf/list/?series=869900&state=* ==== v16 also got a very thorough review and some testing (thanks again!). Thes version addresses all the concerns reported on v15, in terms of feedback and issues reported. Major changes: - Use ASSERT_RTNL. - Moved around some of the page_pool helpers definitions so I can hide some netmem helpers in private files as Jakub suggested. - Don't make every net_iov hold a ref on the binding as Jakub suggested. - Fix issue reported by Taehee where we access queues after they have been freed. Full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v17/ v16: https://patchwork.kernel.org/project/netdevbpf/list/?series=866353&state=* ==== v15 got a thorough review and some testing, and this version addresses almost all the feedback. Some more minor comments where the authors said it could be done later, I left out. Major changes: - Addition of dma-buf introspection to page-pool-get and queue-get. - Fixes to selftests suggested by Taehee. - Fixes to documentation suggested by Donald. - A couple of suggestions and fixes to TCP patches by Eric and David. - Fixes to number assignements suggested by Arnd. - Use rtnl_lock()ing to guard against queue reconfiguration while the page_pool initialization is happening. (Jakub). - Fixes to a few warnings reproduced by Taehee. - Fixes to dma-buf binding suggested by Taehee and Jakub. - Fixes to netlink UAPI suggested by Jakub - Applied a number of Reviewed-bys and Acked-bys (including ones I lost from v13+). Full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v16/ One caveat: Taehee reproduced a KASAN warning and reported it here: https://lore.kernel.org/netdev/CAMArcTUdCxOBYGF3vpbq=eBvqZfnc44KBaQTN7H-wqd… I estimate the issue to be minor and easily fixable: https://lore.kernel.org/netdev/CAHS8izNgaqC--GGE2xd85QB=utUnOHmioCsDd1TNxJW… I hope to be able to follow up with a fix to net tree as net-next closes imminently, but if this iteration doesn't make it in, I will repost with a fix squashed after net-next reopens, no problem. v15: https://patchwork.kernel.org/project/netdevbpf/list/?series=865481&state=* ==== No material changes in this version, only a fix to linking against libynl.a from the last version. Per Jakub's instructions I've pulled one of his patches into this series, and now use the new libynl.a correctly, I hope. As usual, the full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v15/ v14: https://patchwork.kernel.org/project/netdevbpf/list/?series=865135&archive=… ==== No material changes in this version. Only rebase and re-verification on top of net-next. v13, I think, raced with commit ebad6d0334793 ("net/ipv4: Use nested-BH locking for ipv4_tcp_sk.") being merged to net-next that caused a patchwork failure to apply. This series should apply cleanly on commit c4532232fa2a4 ("selftests: net: remove unneeded IP_GRE config"). I did not wait the customary 24hr as Jakub said it's OK to repost as soon as I build test the rebased version: https://lore.kernel.org/netdev/20240625075926.146d769d@kernel.org/ v13: https://patchwork.kernel.org/project/netdevbpf/list/?series=861406&archive=… ==== Major changes: -------------- This iteration addresses Pavel's review comments, applies his reviewed-by's, and seeks to fix the patchwork build error (sorry!). As usual, the full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v13/ v12: https://patchwork.kernel.org/project/netdevbpf/list/?series=859747&state=* ==== Major changes: -------------- This iteration only addresses one minor comment from Pavel with regards to the trace printing of netmem, and the patchwork build error introduced in v11 because I missed doing an allmodconfig build, sorry. Other than that v11, AFAICT, received no feedback. There is one discussion about how the specifics of plugging io uring memory through the page pool, but not relevant to content in this particular patchset, AFAICT. As usual, the full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v12/ v11: https://patchwork.kernel.org/project/netdevbpf/list/?series=857457&state=* ==== Major Changes: -------------- v11 addresses feedback received in v10. The major change is the removal of the memory provider ops as requested by Christoph. We still accomplish the same thing, but utilizing direct function calls with if statements rather than generic ops. Additionally address sparse warnings, bugs and review comments from folks that reviewed. As usual, the full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v11/ Detailed changelog: ------------------- - Fixes in netdev_rx_queue_restart() from Pavel & David. - Remove commit e650e8c3a36f5 ("net: page_pool: create hooks for custom page providers") from the series to address Christoph's feedback and rebased other patches on the series on this change. - Fixed build errors with CONFIG_DMA_SHARED_BUFFER && !CONFIG_GENERIC_ALLOCATOR build. - Fixed sparse warnings pointed out by Paolo. - Drop unnecessary gro_pull_from_frag0 checks. - Added Bagas reviewed-by to docs. Cc: Bagas Sanjaya <bagasdotme(a)gmail.com> Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: Christoph Hellwig <hch(a)infradead.org> Cc: Nikolay Aleksandrov <razor(a)blackwall.org> Cc: Taehee Yoo <ap420073(a)gmail.com> Cc: Donald Hunter <donald.hunter(a)gmail.com> v10: https://patchwork.kernel.org/project/netdevbpf/list/?series=852422&state=* ==== Major Changes: -------------- v9 was sent right before the merge window closed (sorry!). v10 is almost a re-send of the series now that the merge window re-opened. Only rebased to latest net-next and addressed some minor iterative comments received on v9. As usual, the full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v10/ Detailed changelog: ------------------- - Fixed tokens leaking in DONTNEED setsockopt (Nikolay). - Moved net_iov_dma_addr() to devmem.c and made it a devmem specific helpers (David). - Rename hook alloc_pages to alloc_netmems as alloc_pages is now preprocessor macro defined and causes a build error. v9: === Major Changes: -------------- GVE queue API has been merged. Submitting this version as non-RFC after rebasing on top of the merged API, and dropped the out of tree queue API I was carrying on github. Addressed the little feedback v8 has received. Detailed changelog: ------------------ - Added new patch from David Wei to this series for netdev_rx_queue_restart() - Fixed sparse error. - Removed CONFIG_ checks in netmem_is_net_iov() - Flipped skb->readable to skb->unreadable - Minor fixes to selftests & docs. RFC v8: ======= Major Changes: -------------- - Fixed build error generated by patch-by-patch build. - Applied docs suggestions from Randy. RFC v7: ======= Major Changes: -------------- This revision largely rebases on top of net-next and addresses the feedback RFCv6 received from folks, namely Jakub, Yunsheng, Arnd, David, & Pavel. The series remains in RFC because the queue-API ndos defined in this series are not yet implemented. I have a GVE implementation I carry out of tree for my testing. A upstreamable GVE implementation is in the works. Aside from that, in my estimation all the patches are ready for review/merge. Please do take a look. As usual the full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v7/ Detailed changelog: - Use admin-perm in netlink API. - Addressed feedback from Jakub with regards to netlink API implementation. - Renamed devmem.c functions to something more appropriate for that file. - Improve the performance seen through the page_pool benchmark. - Fix the value definition of all the SO_DEVMEM_* uapi. - Various fixes to documentation. Perf - page-pool benchmark: --------------------------- Improved performance of bench_page_pool_simple.ko tests compared to v6: https://pastebin.com/raw/v5dYRg8L net-next base: 8 cycle fast path. RFC v6: 10 cycle fast path. RFC v7: 9 cycle fast path. RFC v7 with CONFIG_DMA_SHARED_BUFFER disabled: 8 cycle fast path, same as baseline. Perf - Devmem TCP benchmark: --------------------- Perf is about the same regardless of the changes in v7, namely the removal of the static_branch_unlikely to improve the page_pool benchmark performance: 189/200gbps bi-directional throughput with RX devmem TCP and regular TCP TX i.e. ~95% line rate. RFC v6: ======= Major Changes: -------------- This revision largely rebases on top of net-next and addresses the little feedback RFCv5 received. The series remains in RFC because the queue-API ndos defined in this series are not yet implemented. I have a GVE implementation I carry out of tree for my testing. A upstreamable GVE implementation is in the works. Aside from that, in my estimation all the patches are ready for review/merge. Please do take a look. As usual the full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v6/ This version also comes with some performance data recorded in the cover letter (see below changelog). Detailed changelog: - Rebased on top of the merged netmem_ref changes. - Converted skb->dmabuf to skb->readable (Pavel). Pavel's original suggestion was to remove the skb->dmabuf flag entirely, but when I looked into it closely, I found the issue that if we remove the flag we have to dereference the shinfo(skb) pointer to obtain the first frag to tell whether an skb is readable or not. This can cause a performance regression if it dirties the cache line when the shinfo(skb) was not really needed. Instead, I converted the skb->dmabuf flag into a generic skb->readable flag which can be re-used by io_uring 0-copy RX. - Squashed a few locking optimizations from Eric Dumazet in the RX path and the DEVMEM_DONTNEED setsockopt. - Expanded the tests a bit. Added validation for invalid scenarios and added some more coverage. Perf - page-pool benchmark: --------------------------- bench_page_pool_simple.ko tests with and without these changes: https://pastebin.com/raw/ncHDwAbn AFAIK the number that really matters in the perf tests is the 'tasklet_page_pool01_fast_path Per elem'. This one measures at about 8 cycles without the changes but there is some 1 cycle noise in some results. With the patches this regresses to 9 cycles with the changes but there is 1 cycle noise occasionally running this test repeatedly. Lastly I tried disable the static_branch_unlikely() in netmem_is_net_iov() check. To my surprise disabling the static_branch_unlikely() check reduces the fast path back to 8 cycles, but the 1 cycle noise remains. Perf - Devmem TCP benchmark: --------------------- 189/200gbps bi-directional throughput with RX devmem TCP and regular TCP TX i.e. ~95% line rate. Major changes in RFC v5: ======================== 1. Rebased on top of 'Abstract page from net stack' series and used the new netmem type to refer to LSB set pointers instead of re-using struct page. 2. Downgraded this series back to RFC and called it RFC v5. This is because this series is now dependent on 'Abstract page from net stack'[1] and the queue API. Both are removed from the series to reduce the patch # and those bits are fairly independent or pre-requisite work. 3. Reworked the page_pool devmem support to use netmem and for some more unified handling. 4. Reworked the reference counting of net_iov (renamed from page_pool_iov) to use pp_ref_count for refcounting. The full changes including the dependent series and GVE page pool support is here: https://github.com/mina/linux/commits/tcpdevmem-rfcv5/ [1] https://patchwork.kernel.org/project/netdevbpf/list/?series=810774 Major changes in v1: ==================== 1. Implemented MVP queue API ndos to remove the userspace-visible driver reset. 2. Fixed issues in the napi_pp_put_page() devmem frag unref path. 3. Removed RFC tag. Many smaller addressed comments across all the patches (patches have individual change log). Full tree including the rest of the GVE driver changes: https://github.com/mina/linux/commits/tcpdevmem-v1 Changes in RFC v3: ================== 1. Pulled in the memory-provider dependency from Jakub's RFC[1] to make the series reviewable and mergeable. 2. Implemented multi-rx-queue binding which was a todo in v2. 3. Fix to cmsg handling. The sticking point in RFC v2[2] was the device reset required to refill the device rx-queues after the dmabuf bind/unbind. The solution suggested as I understand is a subset of the per-queue management ops Jakub suggested or similar: https://lore.kernel.org/netdev/20230815171638.4c057dcd@kernel.org/ This is not addressed in this revision, because: 1. This point was discussed at netconf & netdev and there is openness to using the current approach of requiring a device reset. 2. Implementing individual queue resetting seems to be difficult for my test bed with GVE. My prototype to test this ran into issues with the rx-queues not coming back up properly if reset individually. At the moment I'm unsure if it's a mistake in the POC or a genuine issue in the virtualization stack behind GVE, which currently doesn't test individual rx-queue restart. 3. Our usecases are not bothered by requiring a device reset to refill the buffer queues, and we'd like to support NICs that run into this limitation with resetting individual queues. My thought is that drivers that have trouble with per-queue configs can use the support in this series, while drivers that support new netdev ops to reset individual queues can automatically reset the queue as part of the dma-buf bind/unbind. The same approach with device resets is presented again for consideration with other sticking points addressed. This proposal includes the rx devmem path only proposed for merge. For a snapshot of my entire tree which includes the GVE POC page pool support & device memory support: https://github.com/torvalds/linux/compare/master...mina:linux:tcpdevmem-v3 [1] https://lore.kernel.org/netdev/f8270765-a27b-6ccf-33ea-cda097168d79@redhat.… [2] https://lore.kernel.org/netdev/CAHS8izOVJGJH5WF68OsRWFKJid1_huzzUK+hpKbLcL4… Changes in RFC v2: ================== The sticking point in RFC v1[1] was the dma-buf pages approach we used to deliver the device memory to the TCP stack. RFC v2 is a proof-of-concept that attempts to resolve this by implementing scatterlist support in the networking stack, such that we can import the dma-buf scatterlist directly. This is the approach proposed at a high level here[2]. Detailed changes: 1. Replaced dma-buf pages approach with importing scatterlist into the page pool. 2. Replace the dma-buf pages centric API with a netlink API. 3. Removed the TX path implementation - there is no issue with implementing the TX path with scatterlist approach, but leaving out the TX path makes it easier to review. 4. Functionality is tested with this proposal, but I have not conducted perf testing yet. I'm not sure there are regressions, but I removed perf claims from the cover letter until they can be re-confirmed. 5. Added Signed-off-by: contributors to the implementation. 6. Fixed some bugs with the RX path since RFC v1. Any feedback welcome, but specifically the biggest pending questions needing feedback IMO are: 1. Feedback on the scatterlist-based approach in general. 2. Netlink API (Patch 1 & 2). 3. Approach to handle all the drivers that expect to receive pages from the page pool (Patch 6). [1] https://lore.kernel.org/netdev/dfe4bae7-13a0-3c5d-d671-f61b375cb0b4@gmail.c… [2] https://lore.kernel.org/netdev/CAHS8izPm6XRS54LdCDZVd0C75tA1zHSu6jLVO8nzTLX… ================== * TL;DR: Device memory TCP (devmem TCP) is a proposal for transferring data to and/or from device memory efficiently, without bouncing the data to a host memory buffer. * Problem: A large amount of data transfers have device memory as the source and/or destination. Accelerators drastically increased the volume of such transfers. Some examples include: - ML accelerators transferring large amounts of training data from storage into GPU/TPU memory. In some cases ML training setup time can be as long as 50% of TPU compute time, improving data transfer throughput & efficiency can help improving GPU/TPU utilization. - Distributed training, where ML accelerators, such as GPUs on different hosts, exchange data among them. - Distributed raw block storage applications transfer large amounts of data with remote SSDs, much of this data does not require host processing. Today, the majority of the Device-to-Device data transfers the network are implemented as the following low level operations: Device-to-Host copy, Host-to-Host network transfer, and Host-to-Device copy. The implementation is suboptimal, especially for bulk data transfers, and can put significant strains on system resources, such as host memory bandwidth, PCIe bandwidth, etc. One important reason behind the current state is the kernel’s lack of semantics to express device to network transfers. * Proposal: In this patch series we attempt to optimize this use case by implementing socket APIs that enable the user to: 1. send device memory across the network directly, and 2. receive incoming network packets directly into device memory. Packet _payloads_ go directly from the NIC to device memory for receive and from device memory to NIC for transmit. Packet _headers_ go to/from host memory and are processed by the TCP/IP stack normally. The NIC _must_ support header split to achieve this. Advantages: - Alleviate host memory bandwidth pressure, compared to existing network-transfer + device-copy semantics. - Alleviate PCIe BW pressure, by limiting data transfer to the lowest level of the PCIe tree, compared to traditional path which sends data through the root complex. * Patch overview: ** Part 1: netlink API Gives user ability to bind dma-buf to an RX queue. ** Part 2: scatterlist support Currently the standard for device memory sharing is DMABUF, which doesn't generate struct pages. On the other hand, networking stack (skbs, drivers, and page pool) operate on pages. We have 2 options: 1. Generate struct pages for dmabuf device memory, or, 2. Modify the networking stack to process scatterlist. Approach #1 was attempted in RFC v1. RFC v2 implements approach #2. ** part 3: page pool support We piggy back on page pool memory providers proposal: https://github.com/kuba-moo/linux/tree/pp-providers It allows the page pool to define a memory provider that provides the page allocation and freeing. It helps abstract most of the device memory TCP changes from the driver. ** part 4: support for unreadable skb frags Page pool iovs are not accessible by the host; we implement changes throughput the networking stack to correctly handle skbs with unreadable frags. ** Part 5: recvmsg() APIs We define user APIs for the user to send and receive device memory. Not included with this series is the GVE devmem TCP support, just to simplify the review. Code available here if desired: https://github.com/mina/linux/tree/tcpdevmem This series is built on top of net-next with Jakub's pp-providers changes cherry-picked. * NIC dependencies: 1. (strict) Devmem TCP require the NIC to support header split, i.e. the capability to split incoming packets into a header + payload and to put each into a separate buffer. Devmem TCP works by using device memory for the packet payload, and host memory for the packet headers. 2. (optional) Devmem TCP works better with flow steering support & RSS support, i.e. the NIC's ability to steer flows into certain rx queues. This allows the sysadmin to enable devmem TCP on a subset of the rx queues, and steer devmem TCP traffic onto these queues and non devmem TCP elsewhere. The NIC I have access to with these properties is the GVE with DQO support running in Google Cloud, but any NIC that supports these features would suffice. I may be able to help reviewers bring up devmem TCP on their NICs. * Testing: The series includes a udmabuf kselftest that show a simple use case of devmem TCP and validates the entire data path end to end without a dependency on a specific dmabuf provider. ** Test Setup Kernel: net-next with this series and memory provider API cherry-picked locally. Hardware: Google Cloud A3 VMs. NIC: GVE with header split & RSS & flow steering support. Cc: Pavel Begunkov <asml.silence(a)gmail.com> Cc: David Wei <dw(a)davidwei.uk> Cc: Jason Gunthorpe <jgg(a)ziepe.ca> Cc: Yunsheng Lin <linyunsheng(a)huawei.com> Cc: Shailend Chand <shailend(a)google.com> Cc: Harshitha Ramamurthy <hramamurthy(a)google.com> Cc: Shakeel Butt <shakeel.butt(a)linux.dev> Cc: Jeroen de Borst <jeroendb(a)google.com> Cc: Praveen Kaligineedi <pkaligineedi(a)google.com> Mina Almasry (13): netdev: add netdev_rx_queue_restart() net: netdev netlink api to bind dma-buf to a net device netdev: support binding dma-buf to netdevice netdev: netdevice devmem allocator page_pool: devmem support memory-provider: dmabuf devmem memory provider net: support non paged skb frags net: add support for skbs with unreadable frags tcp: RX path for devmem TCP net: add SO_DEVMEM_DONTNEED setsockopt to release RX frags net: add devmem TCP documentation selftests: add ncdevmem, netcat for devmem TCP netdev: add dmabuf introspection Documentation/netlink/specs/netdev.yaml | 61 +++ Documentation/networking/devmem.rst | 269 ++++++++++++ Documentation/networking/index.rst | 1 + arch/alpha/include/uapi/asm/socket.h | 6 + arch/mips/include/uapi/asm/socket.h | 6 + arch/parisc/include/uapi/asm/socket.h | 6 + arch/sparc/include/uapi/asm/socket.h | 6 + include/linux/netdevice.h | 2 + include/linux/skbuff.h | 61 ++- include/linux/skbuff_ref.h | 9 +- include/linux/socket.h | 1 + include/net/devmem.h | 128 ++++++ include/net/mp_dmabuf_devmem.h | 44 ++ include/net/netdev_rx_queue.h | 5 + include/net/netmem.h | 169 ++++++- include/net/page_pool/helpers.h | 39 +- include/net/page_pool/types.h | 22 +- include/net/sock.h | 2 + include/net/tcp.h | 5 +- include/trace/events/page_pool.h | 12 +- include/uapi/asm-generic/socket.h | 6 + include/uapi/linux/netdev.h | 13 + include/uapi/linux/uio.h | 17 + net/core/Makefile | 3 +- net/core/datagram.c | 6 + net/core/dev.c | 25 +- net/core/devmem.c | 378 ++++++++++++++++ net/core/gro.c | 3 +- net/core/netdev-genl-gen.c | 23 + net/core/netdev-genl-gen.h | 6 + net/core/netdev-genl.c | 129 ++++++ net/core/netdev_rx_queue.c | 74 ++++ net/core/netmem_priv.h | 31 ++ net/core/page_pool.c | 120 +++-- net/core/page_pool_priv.h | 30 ++ net/core/page_pool_user.c | 30 ++ net/core/skbuff.c | 77 +++- net/core/sock.c | 68 +++ net/ethtool/common.c | 9 + net/ipv4/esp4.c | 3 +- net/ipv4/tcp.c | 261 ++++++++++- net/ipv4/tcp_input.c | 13 +- net/ipv4/tcp_ipv4.c | 16 + net/ipv4/tcp_minisocks.c | 2 + net/ipv4/tcp_output.c | 5 +- net/ipv6/esp6.c | 3 +- net/packet/af_packet.c | 4 +- tools/include/uapi/linux/netdev.h | 13 + tools/testing/selftests/net/.gitignore | 1 + tools/testing/selftests/net/Makefile | 9 + tools/testing/selftests/net/ncdevmem.c | 560 ++++++++++++++++++++++++ 51 files changed, 2671 insertions(+), 121 deletions(-) create mode 100644 Documentation/networking/devmem.rst create mode 100644 include/net/devmem.h create mode 100644 include/net/mp_dmabuf_devmem.h create mode 100644 net/core/devmem.c create mode 100644 net/core/netdev_rx_queue.c create mode 100644 net/core/netmem_priv.h create mode 100644 tools/testing/selftests/net/ncdevmem.c -- 2.46.0.76.ge559c4bf1a-goog

1 year, 4 months

2
1
0 0

[PATCH] selftests/net/pmtu.sh: Fix typo in error message

by Abhash Jha

The word 'expected' was spelled as 'exepcted'. Fixed the typo in this patch. Signed-off-by: Abhash Jha <abhashkumarjha123(a)gmail.com> --- tools/testing/selftests/net/pmtu.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh index cfc849580..62eceb385 100755 --- a/tools/testing/selftests/net/pmtu.sh +++ b/tools/testing/selftests/net/pmtu.sh @@ -1347,7 +1347,7 @@ test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception() { size=$(du -sb $tmpoutfile) size=${size%%/tmp/*} - [ $size -ne 1048576 ] && err "File size $size mismatches exepcted value in locally bridged vxlan test" && return 1 + [ $size -ne 1048576 ] && err "File size $size mismatches expected value in locally bridged vxlan test" && return 1 done rm -f "$tmpoutfile" -- 2.43.0

1 year, 4 months

2
1
0 0

[PATCH v3 0/3] tracing: Support poll on event hist file

by Masami Hiramatsu (Google)

Hi, Here is the v3 patch to support polling on event 'hist' file. The previous version is here; https://lore.kernel.org/all/171998475175.54594.7244942110355338359.stgit@de… This version is rebased on the v6.11-rc3. Background ---------- There has been interest in allowing user programs to monitor kernel events in real time. Ftrace provides `trace_pipe` interface to wait on events in the ring buffer, but it is needed to wait until filling up a page with events in the ring buffer. We can also peek the `trace` file periodically, but that is inefficient way to monitor a randomely happening event. Overview -------- This patch set allows user to `poll`(or `select`, `epoll`) on event histogram interface. As you know each event has its own `hist` file which shows histograms generated by trigger action. So user can set a new hist trigger on any event you want to monitor, and poll on the `hist` file until it is updated. There are 2 poll events are supported, POLLIN and POLLPRI. POLLIN means that there are any readable update on `hist` file and this event will be flashed only when you call read(). So, this is useful if you want to read the histogram periodically. The other POLLPRI event is for monitoring trace event. Like the POLLIN, this will be returned when the histogram is updated, but you don't need to read() the file and use poll() again. Note that this waits for histogram update (not event arrival), thus you must set a histogram on the event at first. Usage ----- Here is an example usage: ---- TRACEFS=/sys/kernel/tracing EVENT=$TRACEFS/events/sched/sched_process_free # setup histogram trigger and enable event echo "hist:key=comm" >> $EVENT/trigger echo 1 > $EVENT/enable # Wait for update poll pri $EVENT/hist # Event arrived. echo "process free event is comming" tail $TRACEFS/trace ---- The 'poll' command is in the selftest patch. You can take this series also from here; https://git.kernel.org/pub/scm/linux/kernel/git/mhiramat/linux.git/log/?h=t… Thank you, --- Masami Hiramatsu (Google) (3): tracing/hist: Add poll(POLLIN) support on hist file tracing/hist: Support POLLPRI event for poll on histogram selftests/tracing: Add hist poll() support test include/linux/trace_events.h | 5 + kernel/trace/trace_events.c | 18 ++++ kernel/trace/trace_events_hist.c | 101 +++++++++++++++++++- tools/testing/selftests/ftrace/Makefile | 2 tools/testing/selftests/ftrace/poll.c | 62 ++++++++++++ .../ftrace/test.d/trigger/trigger-hist-poll.tc | 74 +++++++++++++++ 6 files changed, 259 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/ftrace/poll.c create mode 100644 tools/testing/selftests/ftrace/test.d/trigger/trigger-hist-poll.tc -- Masami Hiramatsu (Google) <mhiramat(a)kernel.org>

1 year, 4 months

3
5
0 0

[PATCH] selftests/ftrace: Add required dependency for kprobe tests

by Masami Hiramatsu (Google)

From: Masami Hiramatsu (Google) <mhiramat(a)kernel.org> kprobe_args_{char,string}.tc are using available_filter_functions file which is provided by function tracer. Thus if function tracer is disabled, these tests are failed on recent kernels because tracefs_create_dir is not raised events by adding a dynamic event. Add available_filter_functions to requires line. Fixes: 7c1130ea5cae ("test: ftrace: Fix kprobe test for eventfs") Signed-off-by: Masami Hiramatsu (Google) <mhiramat(a)kernel.org> --- .../ftrace/test.d/kprobe/kprobe_args_char.tc | 2 +- .../ftrace/test.d/kprobe/kprobe_args_string.tc | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_char.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_char.tc index e21c9c27ece4..77f4c07cdcb8 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_char.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_char.tc @@ -1,7 +1,7 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 # description: Kprobe event char type argument -# requires: kprobe_events +# requires: kprobe_events available_filter_functions case `uname -m` in x86_64) diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_string.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_string.tc index 93217d459556..39001073f7ed 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_string.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_string.tc @@ -1,7 +1,7 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 # description: Kprobe event string type argument -# requires: kprobe_events +# requires: kprobe_events available_filter_functions case `uname -m` in x86_64)

1 year, 4 months

3
3
0 0

[PATCH net v2] selftest: af_unix: Fix kselftest compilation warnings

by Abhinav Jain

Change the parameter expected_buf from (const void *) to (const char *) in the function __recvpair() as per the feedback in v1. Add Fixes tag as per feedback in v1. This change fixes the below warnings during test compilation: ``` In file included from msg_oob.c:14: msg_oob.c: In function ‘__recvpair’: ../../kselftest_harness.h:106:40: warning: format ‘%s’ expects argument of type ‘char *’,but argument 6 has type ‘const void *’ [-Wformat=] ../../kselftest_harness.h:101:17: note: in expansion of macro ‘__TH_LOG’ msg_oob.c:235:17: note: in expansion of macro ‘TH_LOG’ ../../kselftest_harness.h:106:40: warning: format ‘%s’ expects argument of type ‘char *’,but argument 6 has type ‘const void *’ [-Wformat=] ../../kselftest_harness.h:101:17: note: in expansion of macro ‘__TH_LOG’ msg_oob.c:259:25: note: in expansion of macro ‘TH_LOG’ ``` v1: lore.kernel.org/netdev/20240810134037.669765-1-jain.abhinav177@gmail.com Fixes: d098d77232c3 ("selftest: af_unix: Add msg_oob.c.") Signed-off-by: Abhinav Jain <jain.abhinav177(a)gmail.com> --- tools/testing/selftests/net/af_unix/msg_oob.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/af_unix/msg_oob.c b/tools/testing/selftests/net/af_unix/msg_oob.c index 16d0c172eaeb..535eb2c3d7d1 100644 --- a/tools/testing/selftests/net/af_unix/msg_oob.c +++ b/tools/testing/selftests/net/af_unix/msg_oob.c @@ -209,7 +209,7 @@ static void __sendpair(struct __test_metadata *_metadata, static void __recvpair(struct __test_metadata *_metadata, FIXTURE_DATA(msg_oob) *self, - const void *expected_buf, int expected_len, + const char *expected_buf, int expected_len, int buf_len, int flags) { int i, ret[2], recv_errno[2], expected_errno = 0; -- 2.34.1

1 year, 4 months

3
4
0 0

[PATCH net 0/2] selftests: Fix udpgro failures

by Hangbin Liu

There are 2 issues for the current udpgro test. The first one is the testing doesn't record all the failures, which may report pass but the test actually failed. e.g. https://netdev-3.bots.linux.dev/vmksft-net/results/725661/45-udpgro-sh/stdo… The other one is after commit d7db7775ea2e ("net: veth: do not manipulate GRO when using XDP"), there is no need to load xdp program to enable GRO on veth device. Hangbin Liu (2): selftests: udpgro: report error when receive failed selftests: udpgro: no need to load xdp for gro tools/testing/selftests/net/udpgro.sh | 50 +++++++++++++-------------- 1 file changed, 25 insertions(+), 25 deletions(-) -- 2.45.0

1 year, 4 months

3
7
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror August 2024