August 2024 - Linux-kselftest-mirror

[PATCH RESEND] x86: checksum: Fix unaligned checksums on < i686

by David Gow

The checksum_32 code was originally written to only handle 2-byte aligned buffers, but was later extended to support arbitrary alignment. However, the non-PPro variant doesn't apply the carry before jumping to the 2- or 4-byte aligned versions, which clear CF. This causes the new checksum_kunit test to fail, as it runs with a large number of different possible alignments and both with and without carries. For example: ./tools/testing/kunit/kunit.py run --arch i386 --kconfig_add CONFIG_M486=y checksum Gives: KTAP version 1 # Subtest: checksum 1..3 ok 1 test_csum_fixed_random_inputs # test_csum_all_carry_inputs: ASSERTION FAILED at lib/checksum_kunit.c:267 Expected result == expec, but result == 65281 (0xff01) expec == 65280 (0xff00) not ok 2 test_csum_all_carry_inputs # test_csum_no_carry_inputs: ASSERTION FAILED at lib/checksum_kunit.c:314 Expected result == expec, but result == 65535 (0xffff) expec == 65534 (0xfffe) not ok 3 test_csum_no_carry_inputs With this patch, it passes. KTAP version 1 # Subtest: checksum 1..3 ok 1 test_csum_fixed_random_inputs ok 2 test_csum_all_carry_inputs ok 3 test_csum_no_carry_inputs I also tested it on a real 486DX2, with the same results. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: David Gow <davidgow(a)google.com> --- Re-sending this from [1]. While there's an argument that the whole 32-bit checksum code could do with rewriting, it's: (a) worth fixing before someone takes the time to rewrite it, and (b) worth any future rewrite starting from a point where the tests pass I don't think there should be any downside to this fix: it only affects ancient computers, and adds a single instruction which isn't in a loop. Cheers, -- David [1]: https://lore.kernel.org/lkml/20230704083206.693155-2-davidgow@google.com/ --- arch/x86/lib/checksum_32.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/lib/checksum_32.S b/arch/x86/lib/checksum_32.S index 68f7fa3e1322..a5123b29b403 100644 --- a/arch/x86/lib/checksum_32.S +++ b/arch/x86/lib/checksum_32.S @@ -62,6 +62,7 @@ SYM_FUNC_START(csum_partial) jl 8f movzbl (%esi), %ebx adcl %ebx, %eax + adcl $0, %eax roll $8, %eax inc %esi testl $2, %esi -- 2.45.2.1089.g2a221341d9-goog

16 hours, 26 minutes

2
2
0 0

[PATCH v12] exec: Fix dead-lock in de_thread with ptrace_attach

by Bernd Edlinger

This introduces signal->exec_bprm, which is used to fix the case when at least one of the sibling threads is traced, and therefore the trace process may dead-lock in ptrace_attach, but de_thread will need to wait for the tracer to continue execution. The solution is to detect this situation and allow ptrace_attach to continue by temporarily releasing the cred_guard_mutex, while de_thread() is still waiting for traced zombies to be eventually released by the tracer. In the case of the thread group leader we only have to wait for the thread to become a zombie, which may also need co-operation from the tracer due to PTRACE_O_TRACEEXIT. When a tracer wants to ptrace_attach a task that already is in execve, we simply retry the ptrace_may_access check while temporarily installing the new credentials and dumpability which are about to be used after execve completes. If the ptrace_attach happens on a thread that is a sibling-thread of the thread doing execve, it is sufficient to check against the old credentials, as this thread will be waited for, before the new credentials are installed. Other threads die quickly since the cred_guard_mutex is released, but a deadly signal is already pending. In case the mutex_lock_killable misses the signal, the non-zero current->signal->exec_bprm makes sure they release the mutex immediately and return with -ERESTARTNOINTR. This means there is no API change, unlike the previous version of this patch which was discussed here: https://lore.kernel.org/lkml/b6537ae6-31b1-5c50-f32b-8b8332ace882@hotmail.d… See tools/testing/selftests/ptrace/vmaccess.c for a test case that gets fixed by this change. Note that since the test case was originally designed to test the ptrace_attach returning an error in this situation, the test expectation needed to be adjusted, to allow the API to succeed at the first attempt. Signed-off-by: Bernd Edlinger <bernd.edlinger(a)hotmail.de> --- fs/exec.c | 69 ++++++++++++++++------- fs/proc/base.c | 6 ++ include/linux/cred.h | 1 + include/linux/sched/signal.h | 18 ++++++ kernel/cred.c | 28 +++++++-- kernel/ptrace.c | 32 +++++++++++ kernel/seccomp.c | 12 +++- tools/testing/selftests/ptrace/vmaccess.c | 23 +++++--- 8 files changed, 155 insertions(+), 34 deletions(-) v10: Changes to previous version, make the PTRACE_ATTACH retun -EAGAIN, instead of execve return -ERESTARTSYS. Added some lessions learned to the description. v11: Check old and new credentials in PTRACE_ATTACH again without changing the API. Note: I got actually one response from an automatic checker to the v11 patch, https://lore.kernel.org/lkml/202107121344.wu68hEPF-lkp@intel.com/ which is complaining about: >> kernel/ptrace.c:425:26: sparse: sparse: incorrect type in assignment (different address spaces) @@ expected struct cred const *old_cred @@ got struct cred const [noderef] __rcu *real_cred @@ 417 struct linux_binprm *bprm = task->signal->exec_bprm; 418 const struct cred *old_cred; 419 struct mm_struct *old_mm; 420 421 retval = down_write_killable(&task->signal->exec_update_lock); 422 if (retval) 423 goto unlock_creds; 424 task_lock(task); > 425 old_cred = task->real_cred; v12: Essentially identical to v11. - Fixed a minor merge conflict in linux v5.17, and fixed the above mentioned nit by adding __rcu to the declaration. - re-tested the patch with all linux versions from v5.11 to v6.6 v10 was an alternative approach which did imply an API change. But I would prefer to avoid such an API change. The difficult part is getting the right dumpability flags assigned before de_thread starts, hope you like this version. If not, the v10 is of course also acceptable. Thanks Bernd. diff --git a/fs/exec.c b/fs/exec.c index 2f2b0acec4f0..902d3b230485 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -1041,11 +1041,13 @@ static int exec_mmap(struct mm_struct *mm) return 0; } -static int de_thread(struct task_struct *tsk) +static int de_thread(struct task_struct *tsk, struct linux_binprm *bprm) { struct signal_struct *sig = tsk->signal; struct sighand_struct *oldsighand = tsk->sighand; spinlock_t *lock = &oldsighand->siglock; + struct task_struct *t = tsk; + bool unsafe_execve_in_progress = false; if (thread_group_empty(tsk)) goto no_thread_group; @@ -1068,6 +1070,19 @@ static int de_thread(struct task_struct *tsk) if (!thread_group_leader(tsk)) sig->notify_count--; + while_each_thread(tsk, t) { + if (unlikely(t->ptrace) + && (t != tsk->group_leader || !t->exit_state)) + unsafe_execve_in_progress = true; + } + + if (unlikely(unsafe_execve_in_progress)) { + spin_unlock_irq(lock); + sig->exec_bprm = bprm; + mutex_unlock(&sig->cred_guard_mutex); + spin_lock_irq(lock); + } + while (sig->notify_count) { __set_current_state(TASK_KILLABLE); spin_unlock_irq(lock); @@ -1158,6 +1173,11 @@ static int de_thread(struct task_struct *tsk) release_task(leader); } + if (unlikely(unsafe_execve_in_progress)) { + mutex_lock(&sig->cred_guard_mutex); + sig->exec_bprm = NULL; + } + sig->group_exec_task = NULL; sig->notify_count = 0; @@ -1169,6 +1189,11 @@ static int de_thread(struct task_struct *tsk) return 0; killed: + if (unlikely(unsafe_execve_in_progress)) { + mutex_lock(&sig->cred_guard_mutex); + sig->exec_bprm = NULL; + } + /* protects against exit_notify() and __exit_signal() */ read_lock(&tasklist_lock); sig->group_exec_task = NULL; @@ -1253,6 +1278,24 @@ int begin_new_exec(struct linux_binprm * bprm) if (retval) return retval; + /* If the binary is not readable then enforce mm->dumpable=0 */ + would_dump(bprm, bprm->file); + if (bprm->have_execfd) + would_dump(bprm, bprm->executable); + + /* + * Figure out dumpability. Note that this checking only of current + * is wrong, but userspace depends on it. This should be testing + * bprm->secureexec instead. + */ + if (bprm->interp_flags & BINPRM_FLAGS_ENFORCE_NONDUMP || + is_dumpability_changed(current_cred(), bprm->cred) || + !(uid_eq(current_euid(), current_uid()) && + gid_eq(current_egid(), current_gid()))) + set_dumpable(bprm->mm, suid_dumpable); + else + set_dumpable(bprm->mm, SUID_DUMP_USER); + /* * Ensure all future errors are fatal. */ @@ -1261,7 +1304,7 @@ int begin_new_exec(struct linux_binprm * bprm) /* * Make this the only thread in the thread group. */ - retval = de_thread(me); + retval = de_thread(me, bprm); if (retval) goto out; @@ -1284,11 +1327,6 @@ int begin_new_exec(struct linux_binprm * bprm) if (retval) goto out; - /* If the binary is not readable then enforce mm->dumpable=0 */ - would_dump(bprm, bprm->file); - if (bprm->have_execfd) - would_dump(bprm, bprm->executable); - /* * Release all of the old mmap stuff */ @@ -1350,18 +1388,6 @@ int begin_new_exec(struct linux_binprm * bprm) me->sas_ss_sp = me->sas_ss_size = 0; - /* - * Figure out dumpability. Note that this checking only of current - * is wrong, but userspace depends on it. This should be testing - * bprm->secureexec instead. - */ - if (bprm->interp_flags & BINPRM_FLAGS_ENFORCE_NONDUMP || - !(uid_eq(current_euid(), current_uid()) && - gid_eq(current_egid(), current_gid()))) - set_dumpable(current->mm, suid_dumpable); - else - set_dumpable(current->mm, SUID_DUMP_USER); - perf_event_exec(); __set_task_comm(me, kbasename(bprm->filename), true); @@ -1480,6 +1506,11 @@ static int prepare_bprm_creds(struct linux_binprm *bprm) if (mutex_lock_interruptible(&current->signal->cred_guard_mutex)) return -ERESTARTNOINTR; + if (unlikely(current->signal->exec_bprm)) { + mutex_unlock(&current->signal->cred_guard_mutex); + return -ERESTARTNOINTR; + } + bprm->cred = prepare_exec_creds(); if (likely(bprm->cred)) return 0; diff --git a/fs/proc/base.c b/fs/proc/base.c index ffd54617c354..0da9adfadb48 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -2788,6 +2788,12 @@ static ssize_t proc_pid_attr_write(struct file * file, const char __user * buf, if (rv < 0) goto out_free; + if (unlikely(current->signal->exec_bprm)) { + mutex_unlock(&current->signal->cred_guard_mutex); + rv = -ERESTARTNOINTR; + goto out_free; + } + rv = security_setprocattr(PROC_I(inode)->op.lsm, file->f_path.dentry->d_name.name, page, count); diff --git a/include/linux/cred.h b/include/linux/cred.h index f923528d5cc4..b01e309f5686 100644 --- a/include/linux/cred.h +++ b/include/linux/cred.h @@ -159,6 +159,7 @@ extern const struct cred *get_task_cred(struct task_struct *); extern struct cred *cred_alloc_blank(void); extern struct cred *prepare_creds(void); extern struct cred *prepare_exec_creds(void); +extern bool is_dumpability_changed(const struct cred *, const struct cred *); extern int commit_creds(struct cred *); extern void abort_creds(struct cred *); extern const struct cred *override_creds(const struct cred *); diff --git a/include/linux/sched/signal.h b/include/linux/sched/signal.h index 0014d3adaf84..14df7073a0a8 100644 --- a/include/linux/sched/signal.h +++ b/include/linux/sched/signal.h @@ -234,9 +234,27 @@ struct signal_struct { struct mm_struct *oom_mm; /* recorded mm when the thread group got * killed by the oom killer */ + struct linux_binprm *exec_bprm; /* Used to check ptrace_may_access + * against new credentials while + * de_thread is waiting for other + * traced threads to terminate. + * Set while de_thread is executing. + * The cred_guard_mutex is released + * after de_thread() has called + * zap_other_threads(), therefore + * a fatal signal is guaranteed to be + * already pending in the unlikely + * event, that + * current->signal->exec_bprm happens + * to be non-zero after the + * cred_guard_mutex was acquired. + */ + struct mutex cred_guard_mutex; /* guard against foreign influences on * credential calculations * (notably. ptrace) + * Held while execve runs, except when + * a sibling thread is being traced. * Deprecated do not use in new code. * Use exec_update_lock instead. */ diff --git a/kernel/cred.c b/kernel/cred.c index 98cb4eca23fb..586cb6c7cf6b 100644 --- a/kernel/cred.c +++ b/kernel/cred.c @@ -433,6 +433,28 @@ static bool cred_cap_issubset(const struct cred *set, const struct cred *subset) return false; } +/** + * is_dumpability_changed - Will changing creds from old to new + * affect the dumpability in commit_creds? + * + * Return: false - dumpability will not be changed in commit_creds. + * Return: true - dumpability will be changed to non-dumpable. + * + * @old: The old credentials + * @new: The new credentials + */ +bool is_dumpability_changed(const struct cred *old, const struct cred *new) +{ + if (!uid_eq(old->euid, new->euid) || + !gid_eq(old->egid, new->egid) || + !uid_eq(old->fsuid, new->fsuid) || + !gid_eq(old->fsgid, new->fsgid) || + !cred_cap_issubset(old, new)) + return true; + + return false; +} + /** * commit_creds - Install new credentials upon the current task * @new: The credentials to be assigned @@ -467,11 +489,7 @@ int commit_creds(struct cred *new) get_cred(new); /* we will require a ref for the subj creds too */ /* dumpability changes */ - if (!uid_eq(old->euid, new->euid) || - !gid_eq(old->egid, new->egid) || - !uid_eq(old->fsuid, new->fsuid) || - !gid_eq(old->fsgid, new->fsgid) || - !cred_cap_issubset(old, new)) { + if (is_dumpability_changed(old, new)) { if (task->mm) set_dumpable(task->mm, suid_dumpable); task->pdeath_signal = 0; diff --git a/kernel/ptrace.c b/kernel/ptrace.c index 443057bee87c..eb1c450bb7d7 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -20,6 +20,7 @@ #include <linux/pagemap.h> #include <linux/ptrace.h> #include <linux/security.h> +#include <linux/binfmts.h> #include <linux/signal.h> #include <linux/uio.h> #include <linux/audit.h> @@ -435,6 +436,28 @@ static int ptrace_attach(struct task_struct *task, long request, if (retval) goto unlock_creds; + if (unlikely(task->in_execve)) { + struct linux_binprm *bprm = task->signal->exec_bprm; + const struct cred __rcu *old_cred; + struct mm_struct *old_mm; + + retval = down_write_killable(&task->signal->exec_update_lock); + if (retval) + goto unlock_creds; + task_lock(task); + old_cred = task->real_cred; + old_mm = task->mm; + rcu_assign_pointer(task->real_cred, bprm->cred); + task->mm = bprm->mm; + retval = __ptrace_may_access(task, PTRACE_MODE_ATTACH_REALCREDS); + rcu_assign_pointer(task->real_cred, old_cred); + task->mm = old_mm; + task_unlock(task); + up_write(&task->signal->exec_update_lock); + if (retval) + goto unlock_creds; + } + write_lock_irq(&tasklist_lock); retval = -EPERM; if (unlikely(task->exit_state)) @@ -508,6 +531,14 @@ static int ptrace_traceme(void) { int ret = -EPERM; + if (mutex_lock_interruptible(&current->signal->cred_guard_mutex)) + return -ERESTARTNOINTR; + + if (unlikely(current->signal->exec_bprm)) { + mutex_unlock(&current->signal->cred_guard_mutex); + return -ERESTARTNOINTR; + } + write_lock_irq(&tasklist_lock); /* Are we already being traced? */ if (!current->ptrace) { @@ -523,6 +554,7 @@ static int ptrace_traceme(void) } } write_unlock_irq(&tasklist_lock); + mutex_unlock(&current->signal->cred_guard_mutex); return ret; } diff --git a/kernel/seccomp.c b/kernel/seccomp.c index 255999ba9190..b29bbfa0b044 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -1955,9 +1955,15 @@ static long seccomp_set_mode_filter(unsigned int flags, * Make sure we cannot change seccomp or nnp state via TSYNC * while another thread is in the middle of calling exec. */ - if (flags & SECCOMP_FILTER_FLAG_TSYNC && - mutex_lock_killable(&current->signal->cred_guard_mutex)) - goto out_put_fd; + if (flags & SECCOMP_FILTER_FLAG_TSYNC) { + if (mutex_lock_killable(&current->signal->cred_guard_mutex)) + goto out_put_fd; + + if (unlikely(current->signal->exec_bprm)) { + mutex_unlock(&current->signal->cred_guard_mutex); + goto out_put_fd; + } + } spin_lock_irq(&current->sighand->siglock); diff --git a/tools/testing/selftests/ptrace/vmaccess.c b/tools/testing/selftests/ptrace/vmaccess.c index 4db327b44586..3b7d81fb99bb 100644 --- a/tools/testing/selftests/ptrace/vmaccess.c +++ b/tools/testing/selftests/ptrace/vmaccess.c @@ -39,8 +39,15 @@ TEST(vmaccess) f = open(mm, O_RDONLY); ASSERT_GE(f, 0); close(f); - f = kill(pid, SIGCONT); - ASSERT_EQ(f, 0); + f = waitpid(-1, NULL, 0); + ASSERT_NE(f, -1); + ASSERT_NE(f, 0); + ASSERT_NE(f, pid); + f = waitpid(-1, NULL, 0); + ASSERT_EQ(f, pid); + f = waitpid(-1, NULL, 0); + ASSERT_EQ(f, -1); + ASSERT_EQ(errno, ECHILD); } TEST(attach) @@ -57,22 +64,24 @@ TEST(attach) sleep(1); k = ptrace(PTRACE_ATTACH, pid, 0L, 0L); - ASSERT_EQ(errno, EAGAIN); - ASSERT_EQ(k, -1); + ASSERT_EQ(k, 0); k = waitpid(-1, &s, WNOHANG); ASSERT_NE(k, -1); ASSERT_NE(k, 0); ASSERT_NE(k, pid); ASSERT_EQ(WIFEXITED(s), 1); ASSERT_EQ(WEXITSTATUS(s), 0); - sleep(1); - k = ptrace(PTRACE_ATTACH, pid, 0L, 0L); + k = waitpid(-1, &s, 0); + ASSERT_EQ(k, pid); + ASSERT_EQ(WIFSTOPPED(s), 1); + ASSERT_EQ(WSTOPSIG(s), SIGTRAP); + k = ptrace(PTRACE_CONT, pid, 0L, 0L); ASSERT_EQ(k, 0); k = waitpid(-1, &s, 0); ASSERT_EQ(k, pid); ASSERT_EQ(WIFSTOPPED(s), 1); ASSERT_EQ(WSTOPSIG(s), SIGSTOP); - k = ptrace(PTRACE_DETACH, pid, 0L, 0L); + k = ptrace(PTRACE_CONT, pid, 0L, 0L); ASSERT_EQ(k, 0); k = waitpid(-1, &s, 0); ASSERT_EQ(k, pid); -- 2.39.2

16 hours, 32 minutes

17
71
0 0

[PATCH] selftests/ftrace: Add test dependency

by Thibault Ferrante

test_duplicates miss a running dependency and leads to test failures on kernel with specific configuration. Signed-off-by: Thibault Ferrante <thibault.ferrante(a)canonical.com> --- .../testing/selftests/ftrace/test.d/dynevent/test_duplicates.tc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/ftrace/test.d/dynevent/test_duplicates.tc b/tools/testing/selftests/ftrace/test.d/dynevent/test_duplicates.tc index d3a79da215c8..0b5e4543e70b 100644 --- a/tools/testing/selftests/ftrace/test.d/dynevent/test_duplicates.tc +++ b/tools/testing/selftests/ftrace/test.d/dynevent/test_duplicates.tc @@ -1,7 +1,7 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 # description: Generic dynamic event - check if duplicate events are caught -# requires: dynamic_events "e[:[<group>/][<event>]] <attached-group>.<attached-event> [<args>]":README +# requires: dynamic_events events/syscalls/sys_enter_openat "e[:[<group>/][<event>]] <attached-group>.<attached-event> [<args>]":README echo 0 > events/enable -- 2.39.2

1 day, 1 hour

2
1
0 0

[PATCH] selftests/ftrace: Test toplevel-enable for instance

by Zheng Yejian

'available_events' is actually not required by 'test.d/event/toplevel-enable.tc' and its Existence has been tested in 'test.d/00basic/basic4.tc'. So the require of 'available_events' can be dropped and then we can add 'instance' flag to test 'test.d/event/toplevel-enable.tc' for instance. Test result show as below: # ./ftracetest test.d/event/toplevel-enable.tc === Ftrace unit tests === [1] event tracing - enable/disable with top level files [PASS] [2] (instance) event tracing - enable/disable with top level files [PASS] # of passed: 2 # of failed: 0 # of unresolved: 0 # of untested: 0 # of unsupported: 0 # of xfailed: 0 # of undefined(test bug): 0 Signed-off-by: Zheng Yejian <zhengyejian1(a)huawei.com> --- tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc b/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc index 93c10ea42a68..8b8e1aea985b 100644 --- a/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc +++ b/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc @@ -1,7 +1,8 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 # description: event tracing - enable/disable with top level files -# requires: available_events set_event events/enable +# requires: set_event events/enable +# flags: instance do_reset() { echo > set_event -- 2.25.1

1 day, 1 hour

2
4
0 0

[PATCH v3] selftests/ftrace: traceonoff_triggers: strip off names

by Yipeng Zou

The func_traceonoff_triggers.tc sometimes goes to fail on my board, Kunpeng-920. [root@localhost]# ./ftracetest ./test.d/ftrace/func_traceonoff_triggers.tc -l fail.log === Ftrace unit tests === [1] ftrace - test for function traceon/off triggers [FAIL] [2] (instance) ftrace - test for function traceon/off triggers [UNSUPPORTED] I look up the log, and it shows that the md5sum is different between csum1 and csum2. ++ cnt=611 ++ sleep .1 +++ cnt_trace +++ grep -v '^#' trace +++ wc -l ++ cnt2=611 ++ '[' 611 -ne 611 ']' +++ cat tracing_on ++ on=0 ++ '[' 0 '!=' 0 ']' +++ md5sum trace ++ csum1='76896aa74362fff66a6a5f3cf8a8a500 trace' ++ sleep .1 +++ md5sum trace ++ csum2='ee8625a21c058818fc26e45c1ed3f6de trace' ++ '[' '76896aa74362fff66a6a5f3cf8a8a500 trace' '!=' 'ee8625a21c058818fc26e45c1ed3f6de trace' ']' ++ fail 'Tracing file is still changing' ++ echo Tracing file is still changing Tracing file is still changing ++ exit_fail ++ exit 1 So I directly dump the trace file before md5sum, the diff shows that: [root@localhost]# diff trace_1.log trace_2.log -y --suppress-common-lines dockerd-12285 [036] d.... 18385.510290: sched_stat | <...>-12285 [036] d.... 18385.510290: sched_stat dockerd-12285 [036] d.... 18385.510291: sched_swit | <...>-12285 [036] d.... 18385.510291: sched_swit <...>-740 [044] d.... 18385.602859: sched_stat | kworker/44:1-740 [044] d.... 18385.602859: sched_stat <...>-740 [044] d.... 18385.602860: sched_swit | kworker/44:1-740 [044] d.... 18385.602860: sched_swit And we can see that <...> filed be filled with names. We can strip off the names there to fix that. After strip off the names: kworker/u257:0-12 [019] d..2. 2528.758910: sched_stat | -12 [019] d..2. 2528.758910: sched_stat_runtime: comm=k kworker/u257:0-12 [019] d..2. 2528.758912: sched_swit | -12 [019] d..2. 2528.758912: sched_switch: prev_comm=kw <idle>-0 [000] d.s5. 2528.762318: sched_waki | -0 [000] d.s5. 2528.762318: sched_waking: comm=sshd pi <idle>-0 [037] dNh2. 2528.762326: sched_wake | -0 [037] dNh2. 2528.762326: sched_wakeup: comm=sshd pi <idle>-0 [037] d..2. 2528.762334: sched_swit | -0 [037] d..2. 2528.762334: sched_switch: prev_comm=sw Fixes: d87b29179aa0 ("selftests: ftrace: Use md5sum to take less time of checking logs") Suggested-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> Signed-off-by: Yipeng Zou <zouyipeng(a)huawei.com> Acked-by: Masami Hiramatsu (Google) <mhiramat(a)kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> --- .../ftrace/test.d/ftrace/func_traceonoff_triggers.tc | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc index aee22289536b..1b57771dbfdf 100644 --- a/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc +++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc @@ -90,9 +90,10 @@ if [ $on != "0" ]; then fail "Tracing is not off" fi -csum1=`md5sum trace` +# Cannot rely on names being around as they are only cached, strip them +csum1=`cat trace | sed -e 's/^ *[^ ]*$-[0-9][0-9]*$/\1/' | md5sum` sleep $SLEEP_TIME -csum2=`md5sum trace` +csum2=`cat trace | sed -e 's/^ *[^ ]*$-[0-9][0-9]*$/\1/' | md5sum` if [ "$csum1" != "$csum2" ]; then fail "Tracing file is still changing" -- 2.34.1

1 day, 1 hour

2
3
0 0

[PATCH v3 0/4] selftests/resctrl: Enable MBM and MBA tests on AMD

by Babu Moger

The MBM (Memory Bandwidth Monitoring) and MBA (Memory Bandwidth Allocation) features are not enabled for AMD systems. The reason was lack of perf counters to compare the resctrl test results. Starting with the commit 25e56847821f ("perf/x86/amd/uncore: Add memory controller support"), AMD now supports the UMC (Unified Memory Controller) perf events. These events can be used to compare the test results. This series adds the support to detect the UMC events and enable MBM/MBA tests for AMD systems. v3: Note: Based the series on top of latest kselftests/master 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0 (tag: v6.10-rc1). Also applied the patches from the series https://lore.kernel.org/lkml/20240531131142.1716-1-ilpo.jarvinen@linux.inte… Separated the fix patch. Renamed the imc to just mc to make it generic. Changed the search string "uncore_imc_" and "amd_umc_" Changes related rebase to latest kselftest tree. v2: Changes. a. Rebased on top of tip/master (Apr 25, 2024) b. Addressed Ilpo comments except the one about close call. It seems more clear to keep READ and WRITE separate. https://lore.kernel.org/lkml/8e4badb7-6cc5-61f1-e041-d902209a90d5@linux.int… c. Used ksft_perror call when applicable. d. Added vendor check for non contiguous CBM check. v1: https://lore.kernel.org/lkml/cover.1708637563.git.babu.moger@amd.com/ Babu Moger (4): selftests/resctrl: Rename variables and functions to generic names selftests/resctrl: Pass sysfs controller name of the vendor selftests/resctrl: Add support for MBM and MBA tests on AMD selftests/resctrl: Enable MBA/MBA tests on AMD tools/testing/selftests/resctrl/mba_test.c | 25 +- tools/testing/selftests/resctrl/mbm_test.c | 23 +- tools/testing/selftests/resctrl/resctrl.h | 2 +- tools/testing/selftests/resctrl/resctrl_val.c | 305 ++++++++++-------- tools/testing/selftests/resctrl/resctrlfs.c | 2 +- 5 files changed, 191 insertions(+), 166 deletions(-) -- 2.34.1

2 months

5
15
0 0

[PATCH v7 0/6] mm/memfd: introduce MFD_NOEXEC_SEAL and MFD_EXEC

by jeffxu＠chromium.org

From: Jeff Xu <jeffxu(a)google.com> Since Linux introduced the memfd feature, memfd have always had their execute bit set, and the memfd_create() syscall doesn't allow setting it differently. However, in a secure by default system, such as ChromeOS, (where all executables should come from the rootfs, which is protected by Verified boot), this executable nature of memfd opens a door for NoExec bypass and enables “confused deputy attack”. E.g, in VRP bug [1]: cros_vm process created a memfd to share the content with an external process, however the memfd is overwritten and used for executing arbitrary code and root escalation. [2] lists more VRP in this kind. On the other hand, executable memfd has its legit use, runc uses memfd’s seal and executable feature to copy the contents of the binary then execute them, for such system, we need a solution to differentiate runc's use of executable memfds and an attacker's [3]. To address those above, this set of patches add following: 1> Let memfd_create() set X bit at creation time. 2> Let memfd to be sealed for modifying X bit. 3> A new pid namespace sysctl: vm.memfd_noexec to control the behavior of X bit.For example, if a container has vm.memfd_noexec=2, then memfd_create() without MFD_NOEXEC_SEAL will be rejected. 4> A new security hook in memfd_create(). This make it possible to a new LSM, which rejects or allows executable memfd based on its security policy. Change history: v7: - patch 2/6: remove #ifdef and MAX_PATH (memfd_test.c). - patch 3/6: check capability (CAP_SYS_ADMIN) from userns instead of global ns (pid_sysctl.h). Add a tab (pid_namespace.h). - patch 5/6: remove #ifdef (memfd_test.c) - patch 6/6: remove unneeded security_move_mount(security.c). v6:https://lore.kernel.org/lkml/20221206150233.1963717-1-jeffxu@google.com/ - Address comment and move "#ifdef CONFIG_" from .c file to pid_sysctl.h v5:https://lore.kernel.org/lkml/20221206152358.1966099-1-jeffxu@google.com/ - Pass vm.memfd_noexec from current ns to child ns. - Fix build issue detected by kernel test robot. - Add missing security.c v3:https://lore.kernel.org/lkml/20221202013404.163143-1-jeffxu@google.com/ - Address API design comments in v2. - Let memfd_create() to set X bit at creation time. - A new pid namespace sysctl: vm.memfd_noexec to control behavior of X bit. - A new security hook in memfd_create(). v2:https://lore.kernel.org/lkml/20220805222126.142525-1-jeffxu@google.com/ - address comments in V1. - add sysctl (vm.mfd_noexec) to set the default file permissions of memfd_create to be non-executable. v1:https://lwn.net/Articles/890096/ [1] https://crbug.com/1305411 [2] https://bugs.chromium.org/p/chromium/issues/list?q=type%3Dbug-security%20me… [3] https://lwn.net/Articles/781013/ Daniel Verkamp (2): mm/memfd: add F_SEAL_EXEC selftests/memfd: add tests for F_SEAL_EXEC Jeff Xu (4): mm/memfd: add MFD_NOEXEC_SEAL and MFD_EXEC mm/memfd: Add write seals when apply SEAL_EXEC to executable memfd selftests/memfd: add tests for MFD_NOEXEC_SEAL MFD_EXEC mm/memfd: security hook for memfd_create include/linux/lsm_hook_defs.h | 1 + include/linux/lsm_hooks.h | 4 + include/linux/pid_namespace.h | 19 ++ include/linux/security.h | 6 + include/uapi/linux/fcntl.h | 1 + include/uapi/linux/memfd.h | 4 + kernel/pid_namespace.c | 5 + kernel/pid_sysctl.h | 59 ++++ mm/memfd.c | 61 +++- mm/shmem.c | 6 + security/security.c | 5 + tools/testing/selftests/memfd/fuse_test.c | 1 + tools/testing/selftests/memfd/memfd_test.c | 341 ++++++++++++++++++++- 13 files changed, 510 insertions(+), 3 deletions(-) create mode 100644 kernel/pid_sysctl.h base-commit: eb7081409f94a9a8608593d0fb63a1aa3d6f95d8 -- 2.39.0.rc1.256.g54fd8350bd-goog

3 months

9
25
0 0

[PATCH v2 00/19] iommufd: Add VIOMMU infrastructure (Part-1)

by Nicolin Chen

This series introduces a new VIOMMU infrastructure and related ioctls. IOMMUFD has been using the HWPT infrastructure for all cases, including a nested IO page table support. Yet, there're limitations for an HWPT-based structure to support some advanced HW-accelerated features, such as CMDQV on NVIDIA Grace, and HW-accelerated vIOMMU on AMD. Even for a multi-IOMMU environment, it is not straightforward for nested HWPTs to share the same parent HWPT (stage-2 IO pagetable), with the HWPT infrastructure alone. The new VIOMMU object is an additional layer, between the nested HWPT and its parent HWPT, to give to both the IOMMUFD core and an IOMMU driver an additional structure to support HW-accelerated feature: ---------------------------- ---------------- | | paging_hwpt0 | | hwpt_nested0 |--->| viommu0 ------------------ ---------------- | | HW-accel feats | ---------------------------- On a multi-IOMMU system, the VIOMMU object can be instanced to the number of vIOMMUs in a guest VM, while holding the same parent HWPT to share the stage-2 IO pagetable. Each VIOMMU then just need to only allocate its own VMID to attach the shared stage-2 IO pagetable to the physical IOMMU: ---------------------------- ---------------- | | paging_hwpt0 | | hwpt_nested0 |--->| viommu0 ------------------ ---------------- | | VMID0 | ---------------------------- ---------------------------- ---------------- | | paging_hwpt0 | | hwpt_nested1 |--->| viommu1 ------------------ ---------------- | | VMID1 | ---------------------------- As an initial part-1, add ioctls to support a VIOMMU-based invalidation: IOMMUFD_CMD_VIOMMU_ALLOC to allocate a VIOMMU object IOMMUFD_CMD_VIOMMU_SET/UNSET_VDEV_ID to set/clear device's virtual ID (Resue IOMMUFD_CMD_HWPT_INVALIDATE for a VIOMMU object to flush cache by a given driver data) Worth noting that the VDEV_ID is for a per-VIOMMU device list for drivers to look up the device's physical instance from its virtual ID in a VM. It is essential for a VIOMMU-based invalidation where the request contains a device's virtual ID for its device cache flush, e.g. ATC invalidation. As for the implementation of the series, add an IOMMU_VIOMMU_TYPE_DEFAULT type for a core-allocated-core-managed VIOMMU object, allowing drivers to simply hook a default viommu ops for viommu-based invalidation alone. And provide some viommu helpers to drivers for VDEV_ID translation and parent domain lookup. Add VIOMMU invalidation support to ARM SMMUv3 driver for a real world use case. This adds supports of arm-smmuv-v3's CMDQ_OP_ATC_INV and CMDQ_OP_CFGI_CD/ALL commands, supplementing HWPT-based invalidations. In the future, drivers will also be able to choose a driver-managed type to hold its own structure by adding a new type to enum iommu_viommu_type. More VIOMMU-based structures and ioctls will be introduced in part-2/3 to support a driver-managed VIOMMU, e.g. VQUEUE object for a HW accelerated queue, VIRQ (or VEVENT) object for IRQ injections. Although we repurposed the VIOMMU object from an earlier RFC discussion, for a referece: https://lore.kernel.org/all/cover.1712978212.git.nicolinc@nvidia.com/ This series is on Github: https://github.com/nicolinc/iommufd/commits/iommufd_viommu_p1-v2 Paring QEMU branch for testing: https://github.com/nicolinc/qemu/commits/wip/for_iommufd_viommu_p1-v2 Changelog v2 * Limited vdev_id to one per idev * Added a rw_sem to protect the vdev_id list * Reworked driver-level APIs with proper lockings * Added a new viommu_api file for IOMMUFD_DRIVER config * Dropped useless iommu_dev point from the viommu structure * Added missing index numnbers to new types in the uAPI header * Dropped IOMMU_VIOMMU_INVALIDATE uAPI; Instead, reuse the HWPT one * Reworked mock_viommu_cache_invalidate() using the new iommu helper * Reordered details of set/unset_vdev_id handlers for proper lockings * Added arm_smmu_cache_invalidate_user patch from Jason's nesting series v1 https://lore.kernel.org/all/cover.1723061377.git.nicolinc@nvidia.com/ Thanks! Nicolin Jason Gunthorpe (3): iommu: Add iommu_copy_struct_from_full_user_array helper iommu/arm-smmu-v3: Allow ATS for IOMMU_DOMAIN_NESTED iommu/arm-smmu-v3: Update comments about ATS and bypass Nicolin Chen (16): iommufd: Reorder struct forward declarations iommufd/viommu: Add IOMMUFD_OBJ_VIOMMU and IOMMU_VIOMMU_ALLOC ioctl iommu: Pass in a viommu pointer to domain_alloc_user op iommufd: Allow pt_id to carry viommu_id for IOMMU_HWPT_ALLOC iommufd/selftest: Add IOMMU_VIOMMU_ALLOC test coverage iommufd/viommu: Add IOMMU_VIOMMU_SET/UNSET_VDEV_ID ioctl iommufd/selftest: Add IOMMU_VIOMMU_SET/UNSET_VDEV_ID test coverage iommufd/viommu: Add cache_invalidate for IOMMU_VIOMMU_TYPE_DEFAULT iommufd: Allow hwpt_id to carry viommu_id for IOMMU_HWPT_INVALIDATE iommufd/viommu: Add vdev_id helpers for IOMMU drivers iommufd/selftest: Add mock_viommu_invalidate_user op iommufd/selftest: Add IOMMU_TEST_OP_DEV_CHECK_CACHE test command iommufd/selftest: Add VIOMMU coverage for IOMMU_HWPT_INVALIDATE ioctl iommufd/viommu: Add iommufd_viommu_to_parent_domain helper iommu/arm-smmu-v3: Add arm_smmu_cache_invalidate_user iommu/arm-smmu-v3: Add arm_smmu_viommu_cache_invalidate drivers/iommu/amd/iommu.c | 1 + drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 218 ++++++++++++++- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 3 + drivers/iommu/intel/iommu.c | 1 + drivers/iommu/iommufd/Makefile | 5 +- drivers/iommu/iommufd/device.c | 12 + drivers/iommu/iommufd/hw_pagetable.c | 59 +++- drivers/iommu/iommufd/iommufd_private.h | 37 +++ drivers/iommu/iommufd/iommufd_test.h | 30 ++ drivers/iommu/iommufd/main.c | 12 + drivers/iommu/iommufd/selftest.c | 101 ++++++- drivers/iommu/iommufd/viommu.c | 196 +++++++++++++ drivers/iommu/iommufd/viommu_api.c | 53 ++++ include/linux/iommu.h | 56 +++- include/linux/iommufd.h | 51 +++- include/uapi/linux/iommufd.h | 117 +++++++- tools/testing/selftests/iommu/iommufd.c | 259 +++++++++++++++++- tools/testing/selftests/iommu/iommufd_utils.h | 126 +++++++++ 18 files changed, 1299 insertions(+), 38 deletions(-) create mode 100644 drivers/iommu/iommufd/viommu.c create mode 100644 drivers/iommu/iommufd/viommu_api.c -- 2.43.0

7 months, 1 week

7
148
0 0

[RFC PATCH 00/11] New KVM ioctl to link a gmem inode to a new gmem file

by Ackerley Tng

Hello, This patchset builds upon the code at https://lore.kernel.org/lkml/20230718234512.1690985-1-seanjc@google.com/T/. This code is available at https://github.com/googleprodkernel/linux-cc/tree/kvm-gmem-link-migrate-rfc…. In guest_mem v11, a split file/inode model was proposed, where memslot bindings belong to the file and pages belong to the inode. This model lends itself well to having different VMs use separate files pointing to the same inode. This RFC proposes an ioctl, KVM_LINK_GUEST_MEMFD, that takes a VM and a gmem fd, and returns another gmem fd referencing a different file and associated with VM. This RFC also includes an update to KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM to migrate memory context (slot->arch.lpage_info and kvm->mem_attr_array) from source to destination vm, intra-host. Intended usage of the two ioctls: 1. Source VM’s fd is passed to destination VM via unix sockets 2. Destination VM uses new ioctl KVM_LINK_GUEST_MEMFD to link source VM’s fd to a new fd. 3. Destination VM will pass new fds to KVM_SET_USER_MEMORY_REGION, which will bind the new file, pointing to the same inode that the source VM’s file points to, to memslots 4. Use KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM to move kvm->mem_attr_array and slot->arch.lpage_info to the destination VM. 5. Run the destination VM as per normal Some other approaches considered were: + Using the linkat() syscall, but that requires a mount/directory for a source fd to be linked to + Using the dup() syscall, but that only duplicates the fd, and both fds point to the same file --- Ackerley Tng (11): KVM: guest_mem: Refactor out kvm_gmem_alloc_file() KVM: guest_mem: Add ioctl KVM_LINK_GUEST_MEMFD KVM: selftests: Add tests for KVM_LINK_GUEST_MEMFD ioctl KVM: selftests: Test transferring private memory to another VM KVM: x86: Refactor sev's flag migration_in_progress to kvm struct KVM: x86: Refactor common code out of sev.c KVM: x86: Refactor common migration preparation code out of sev_vm_move_enc_context_from KVM: x86: Let moving encryption context be configurable KVM: x86: Handle moving of memory context for intra-host migration KVM: selftests: Generalize migration functions from sev_migrate_tests.c KVM: selftests: Add tests for migration of private mem arch/x86/include/asm/kvm_host.h | 4 +- arch/x86/kvm/svm/sev.c | 85 ++----- arch/x86/kvm/svm/svm.h | 3 +- arch/x86/kvm/x86.c | 221 +++++++++++++++++- arch/x86/kvm/x86.h | 6 + include/linux/kvm_host.h | 18 ++ include/uapi/linux/kvm.h | 8 + tools/testing/selftests/kvm/Makefile | 1 + .../testing/selftests/kvm/guest_memfd_test.c | 42 ++++ .../selftests/kvm/include/kvm_util_base.h | 31 +++ .../kvm/x86_64/private_mem_migrate_tests.c | 93 ++++++++ .../selftests/kvm/x86_64/sev_migrate_tests.c | 48 ++-- virt/kvm/guest_mem.c | 151 ++++++++++-- virt/kvm/kvm_main.c | 10 + virt/kvm/kvm_mm.h | 7 + 15 files changed, 596 insertions(+), 132 deletions(-) create mode 100644 tools/testing/selftests/kvm/x86_64/private_mem_migrate_tests.c -- 2.41.0.640.ga95def55d0-goog

7 months, 2 weeks

3
15
0 0

[PATCH v6 0/5] userfaultfd move option

by Suren Baghdasaryan

This patch series introduces UFFDIO_MOVE feature to userfaultfd, which has long been implemented and maintained by Andrea in his local tree [1], but was not upstreamed due to lack of use cases where this approach would be better than allocating a new page and copying the contents. Previous upstraming attempts could be found at [6] and [7]. UFFDIO_COPY performs ~20% better than UFFDIO_MOVE when the application needs pages to be allocated [2]. However, with UFFDIO_MOVE, if pages are available (in userspace) for recycling, as is usually the case in heap compaction algorithms, then we can avoid the page allocation and memcpy (done by UFFDIO_COPY). Also, since the pages are recycled in the userspace, we avoid the need to release (via madvise) the pages back to the kernel [3]. We see over 40% reduction (on a Google pixel 6 device) in the compacting thread’s completion time by using UFFDIO_MOVE vs. UFFDIO_COPY. This was measured using a benchmark that emulates a heap compaction implementation using userfaultfd (to allow concurrent accesses by application threads). More details of the usecase are explained in [3]. Furthermore, UFFDIO_MOVE enables moving swapped-out pages without touching them within the same vma. Today, it can only be done by mremap, however it forces splitting the vma. TODOs for follow-up improvements: - cross-mm support. Known differences from single-mm and missing pieces: - memcg recharging (might need to isolate pages in the process) - mm counters - cross-mm deposit table moves - cross-mm test - document the address space where src and dest reside in struct uffdio_move - TLB flush batching. Will require extensive changes to PTL locking in move_pages_pte(). OTOH that might let us reuse parts of mremap code. Changes since v5 [10]: - added logic to split large folios in move_pages_pte(), per David Hildenbrand - added check for PAE before split_huge_pmd() to avoid the split if the move operation can't be done - replaced calls to default_huge_page_size() with read_pmd_pagesize() in uffd_move_pmd test, per David Hildenbrand - fixed the condition in uffd_move_test_common() checking if area alignment is needed Changes since v4 [9]: - added Acked-by in patch 1, per Peter Xu - added description for ctx, mm and mode parameters of move_pages(), per kernel test robot - added Reviewed-by's, per Peter Xu and Axel Rasmussen - removed unused operations in uffd_test_case_ops - refactored uffd-unit-test changes to avoid using global variables and handle pmd moves without page size overrides, per Peter Xu Changes since v3 [8]: - changed retry path in folio_lock_anon_vma_read() to unlock and then relock RCU, per Peter Xu - removed cross-mm support from initial patchset, per David Hildenbrand - replaced BUG_ONs with VM_WARN_ON or WARN_ON_ONCE, per David Hildenbrand - added missing cache flushing, per Lokesh Gidra and Peter Xu - updated manpage text in the patch description, per Peter Xu - renamed internal functions from "remap" to "move", per Peter Xu - added mmap_changing check after taking mmap_lock, per Peter Xu - changed uffd context check to ensure dst_mm is registered onto uffd we are operating on, Peter Xu and David Hildenbrand - changed to non-maybe variants of maybe*_mkwrite(), per David Hildenbrand - fixed warning for CONFIG_TRANSPARENT_HUGEPAGE=n, per kernel test robot - comments cleanup, per David Hildenbrand and Peter Xu - checks for VM_IO,VM_PFNMAP,VM_HUGETLB,..., per David Hildenbrand - prevent moving pinned pages, per Peter Xu - changed uffd tests to call move uffd_test_ctx_clear() at the end of the test run instead of in the beginning of the next run - added support for testcase-specific ops - added test for moving PMD-aligned blocks Changes since v2 [5]: - renamed UFFDIO_REMAP to UFFDIO_MOVE, per David Hildenbrand - rebase over mm-unstable to use folio_move_anon_rmap(), per David Hildenbrand - added text for manpage explaining DONTFORK and KSM requirements for this feature, per David Hildenbrand - check for anon_vma changes in the fast path of folio_lock_anon_vma_read, per Peter Xu - updated the title and description of the first patch, per David Hildenbrand - updating comments in folio_lock_anon_vma_read() explaining the need for anon_vma checks, per David Hildenbrand - changed all mapcount checks to PageAnonExclusive, per Jann Horn and David Hildenbrand - changed counters in remap_swap_pte() from MM_ANONPAGES to MM_SWAPENTS, per Jann Horn - added a check for PTE change after folio is locked in remap_pages_pte(), per Jann Horn - added handling of PMD migration entries and bailout when pmd_devmap(), per Jann Horn - added checks to ensure both src and dst VMAs are writable, per Peter Xu - added UFFD_FEATURE_MOVE, per Peter Xu - removed obsolete comments, per Peter Xu - renamed remap_anon_pte to remap_present_pte, per Peter Xu - added a comment for folio_get_anon_vma() explaining the need for anon_vma checks, per Peter Xu - changed error handling in remap_pages() to make it more clear, per Peter Xu - changed EFAULT to EAGAIN to retry when a hugepage appears or disappears from under us, per Peter Xu - added links to previous upstreaming attempts, per David Hildenbrand Changes since v1 [4]: - add mmget_not_zero in userfaultfd_remap, per Jann Horn - removed extern from function definitions, per Matthew Wilcox - converted to folios in remap_pages_huge_pmd, per Matthew Wilcox - use PageAnonExclusive in remap_pages_huge_pmd, per David Hildenbrand - handle pgtable transfers between MMs, per Jann Horn - ignore concurrent A/D pte bit changes, per Jann Horn - split functions into smaller units, per David Hildenbrand - test for folio_test_large in remap_anon_pte, per Matthew Wilcox - use pte_swp_exclusive for swapcount check, per David Hildenbrand - eliminated use of mmu_notifier_invalidate_range_start_nonblock, per Jann Horn - simplified THP alignment checks, per Jann Horn - refactored the loop inside remap_pages, per Jann Horn - additional clarifying comments, per Jann Horn Main changes since Andrea's last version [1]: - Trivial translations from page to folio, mmap_sem to mmap_lock - Replace pmd_trans_unstable() with pte_offset_map_nolock() and handle its possible failure - Move pte mapping into remap_pages_pte to allow for retries when source page or anon_vma is contended. Since pte_offset_map_nolock() start RCU read section, we can't block anymore after mapping a pte, so have to unmap the ptesm do the locking and retry. - Add and use anon_vma_trylock_write() to avoid blocking while in RCU read section. - Accommodate changes in mmu_notifier_range_init() API, switch to mmu_notifier_invalidate_range_start_nonblock() to avoid blocking while in RCU read section. - Open-code now removed __swp_swapcount() - Replace pmd_read_atomic() with pmdp_get_lockless() - Add new selftest for UFFDIO_MOVE [1] https://gitlab.com/aarcange/aa/-/commit/2aec7aea56b10438a3881a20a411aa4b1fc… [2] https://lore.kernel.org/all/1425575884-2574-1-git-send-email-aarcange@redha… [3] https://lore.kernel.org/linux-mm/CA+EESO4uO84SSnBhArH4HvLNhaUQ5nZKNKXqxRCyj… [4] https://lore.kernel.org/all/20230914152620.2743033-1-surenb@google.com/ [5] https://lore.kernel.org/all/20230923013148.1390521-1-surenb@google.com/ [6] https://lore.kernel.org/all/1425575884-2574-21-git-send-email-aarcange@redh… [7] https://lore.kernel.org/all/cover.1547251023.git.blake.caldwell@colorado.ed… [8] https://lore.kernel.org/all/20231009064230.2952396-1-surenb@google.com/ [9] https://lore.kernel.org/all/20231028003819.652322-1-surenb@google.com/ [10] https://lore.kernel.org/all/20231121171643.3719880-1-surenb@google.com/ Andrea Arcangeli (2): mm/rmap: support move to different root anon_vma in folio_move_anon_rmap() userfaultfd: UFFDIO_MOVE uABI Suren Baghdasaryan (3): selftests/mm: call uffd_test_ctx_clear at the end of the test selftests/mm: add uffd_test_case_ops to allow test case-specific operations selftests/mm: add UFFDIO_MOVE ioctl test Documentation/admin-guide/mm/userfaultfd.rst | 3 + fs/userfaultfd.c | 72 +++ include/linux/rmap.h | 5 + include/linux/userfaultfd_k.h | 11 + include/uapi/linux/userfaultfd.h | 29 +- mm/huge_memory.c | 122 ++++ mm/khugepaged.c | 3 + mm/rmap.c | 30 + mm/userfaultfd.c | 614 +++++++++++++++++++ tools/testing/selftests/mm/uffd-common.c | 39 +- tools/testing/selftests/mm/uffd-common.h | 9 + tools/testing/selftests/mm/uffd-stress.c | 5 +- tools/testing/selftests/mm/uffd-unit-tests.c | 192 ++++++ 13 files changed, 1130 insertions(+), 4 deletions(-) -- 2.43.0.rc2.451.g8631bc7472-goog

8 months

7
43
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror August 2024