August 2024 - Linux-kselftest-mirror

[PATCH net-next v5] net: netconsole: selftests: Create a new netconsole selftest

by Breno Leitao

Adds a selftest that creates two virtual interfaces, assigns one to a new namespace, and assigns IP addresses to both. It listens on the destination interface using socat and configures a dynamic target on netconsole, pointing to the destination IP address. The test then checks if the message was received properly on the destination interface. Signed-off-by: Breno Leitao <leitao(a)debian.org> Acked-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Changelog: v5: * Replace check_file_size() by "test -s" (Matthieu) v4: * Avoid sleeping in waiting for sockets and files (Matthieu Baerts) * Some other improvements (Matthieu Baerts) * Add configfs as a dependency (Jakub) * https://lore.kernel.org/all/20240816132450.346744-1-leitao@debian.org/ v3: * Defined CONFIGs in config file (Jakub) * Identention fixes (Petr Machata) * Use setup_ns in a better way (Matthieu Baerts) * Add dependencies in TEST_INCLUDES (Hangbin Liu) * https://lore.kernel.org/all/20240815095157.3064722-1-leitao@debian.org/ v2: * Change the location of the path (Jakub) * Move from veth to netdevsim * Other small changes in dependency checks and cleanup * https://lore.kernel.org/all/20240813183825.837091-1-leitao@debian.org/ v1: * https://lore.kernel.org/all/ZqyUHN770pjSofTC@gmail.com/ MAINTAINERS | 1 + tools/testing/selftests/drivers/net/Makefile | 5 +- tools/testing/selftests/drivers/net/config | 4 + .../selftests/drivers/net/netcons_basic.sh | 225 ++++++++++++++++++ 4 files changed, 234 insertions(+), 1 deletion(-) create mode 100755 tools/testing/selftests/drivers/net/netcons_basic.sh diff --git a/MAINTAINERS b/MAINTAINERS index 5dbf23cf11c8..9a371ddd8719 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15772,6 +15772,7 @@ M: Breno Leitao <leitao(a)debian.org> S: Maintained F: Documentation/networking/netconsole.rst F: drivers/net/netconsole.c +F: tools/testing/selftests/drivers/net/netcons_basic.sh NETDEVSIM M: Jakub Kicinski <kuba(a)kernel.org> diff --git a/tools/testing/selftests/drivers/net/Makefile b/tools/testing/selftests/drivers/net/Makefile index e54f382bcb02..39fb97a8c1df 100644 --- a/tools/testing/selftests/drivers/net/Makefile +++ b/tools/testing/selftests/drivers/net/Makefile @@ -1,8 +1,11 @@ # SPDX-License-Identifier: GPL-2.0 -TEST_INCLUDES := $(wildcard lib/py/*.py) +TEST_INCLUDES := $(wildcard lib/py/*.py) \ + ../../net/net_helper.sh \ + ../../net/lib.sh \ TEST_PROGS := \ + netcons_basic.sh \ ping.py \ queues.py \ stats.py \ diff --git a/tools/testing/selftests/drivers/net/config b/tools/testing/selftests/drivers/net/config index f6a58ce8a230..a2d8af60876d 100644 --- a/tools/testing/selftests/drivers/net/config +++ b/tools/testing/selftests/drivers/net/config @@ -1,2 +1,6 @@ CONFIG_IPV6=y CONFIG_NETDEVSIM=m +CONFIG_CONFIGFS_FS=y +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETCONSOLE_EXTENDED_LOG=y diff --git a/tools/testing/selftests/drivers/net/netcons_basic.sh b/tools/testing/selftests/drivers/net/netcons_basic.sh new file mode 100755 index 000000000000..137875505663 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netcons_basic.sh @@ -0,0 +1,225 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-2.0 + +# This test creates two netdevsim virtual interfaces, assigns one of them (the +# "destination interface") to a new namespace, and assigns IP addresses to both +# interfaces. +# +# It listens on the destination interface using socat and configures a dynamic +# target on netconsole, pointing to the destination IP address. +# +# Finally, it checks whether the message was received properly on the +# destination interface. Note that this test may pollute the kernel log buffer +# (dmesg) and relies on dynamic configuration and namespaces being configured. +# +# Author: Breno Leitao <leitao(a)debian.org> + +set -euo pipefail + +SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")") + +# Simple script to test dynamic targets in netconsole +SRCIF="" # to be populated later +SRCIP=192.168.1.1 +DSTIF="" # to be populated later +DSTIP=192.168.1.2 + +PORT="6666" +MSG="netconsole selftest" +TARGET=$(mktemp -u netcons_XXXXX) +NETCONS_CONFIGFS="/sys/kernel/config/netconsole" +NETCONS_PATH="${NETCONS_CONFIGFS}"/"${TARGET}" +# NAMESPACE will be populated by setup_ns with a random value +NAMESPACE="" + +# IDs for netdevsim +NSIM_DEV_1_ID=$((256 + RANDOM % 256)) +NSIM_DEV_2_ID=$((512 + RANDOM % 256)) + +# Used to create and delete namespaces +source "${SCRIPTDIR}"/../../net/lib.sh +source "${SCRIPTDIR}"/../../net/net_helper.sh + +# Create netdevsim interfaces +create_ifaces() { + local NSIM_DEV_SYS_NEW=/sys/bus/netdevsim/new_device + + echo "$NSIM_DEV_2_ID" > "$NSIM_DEV_SYS_NEW" + echo "$NSIM_DEV_1_ID" > "$NSIM_DEV_SYS_NEW" + udevadm settle 2> /dev/null || true + + local NSIM1=/sys/bus/netdevsim/devices/netdevsim"$NSIM_DEV_1_ID" + local NSIM2=/sys/bus/netdevsim/devices/netdevsim"$NSIM_DEV_2_ID" + + # These are global variables + SRCIF=$(find "$NSIM1"/net -maxdepth 1 -type d ! \ + -path "$NSIM1"/net -exec basename {} \;) + DSTIF=$(find "$NSIM2"/net -maxdepth 1 -type d ! \ + -path "$NSIM2"/net -exec basename {} \;) +} + +link_ifaces() { + local NSIM_DEV_SYS_LINK="/sys/bus/netdevsim/link_device" + local SRCIF_IFIDX=$(cat /sys/class/net/"$SRCIF"/ifindex) + local DSTIF_IFIDX=$(cat /sys/class/net/"$DSTIF"/ifindex) + + exec {NAMESPACE_FD}</var/run/netns/"${NAMESPACE}" + exec {INITNS_FD}</proc/self/ns/net + + # Bind the dst interface to namespace + ip link set "${DSTIF}" netns "${NAMESPACE}" + + # Linking one device to the other one (on the other namespace} + if ! echo "${INITNS_FD}:$SRCIF_IFIDX $NAMESPACE_FD:$DSTIF_IFIDX" > $NSIM_DEV_SYS_LINK + then + echo "linking netdevsim1 with netdevsim2 should succeed" + cleanup + exit "${ksft_skip}" + fi +} + +function configure_ip() { + # Configure the IPs for both interfaces + ip netns exec "${NAMESPACE}" ip addr add "${DSTIP}"/24 dev "${DSTIF}" + ip netns exec "${NAMESPACE}" ip link set "${DSTIF}" up + + ip addr add "${SRCIP}"/24 dev "${SRCIF}" + ip link set "${SRCIF}" up +} + +function set_network() { + # setup_ns function is coming from lib.sh + setup_ns NAMESPACE + + # Create both interfaces, and assign the destination to a different + # namespace + create_ifaces + + # Link both interfaces back to back + link_ifaces + + configure_ip +} + +function create_dynamic_target() { + DSTMAC=$(ip netns exec "${NAMESPACE}" \ + ip link show "${DSTIF}" | awk '/ether/ {print $2}') + + # Create a dynamic target + mkdir "${NETCONS_PATH}" + + echo "${DSTIP}" > "${NETCONS_PATH}"/remote_ip + echo "${SRCIP}" > "${NETCONS_PATH}"/local_ip + echo "${DSTMAC}" > "${NETCONS_PATH}"/remote_mac + echo "${SRCIF}" > "${NETCONS_PATH}"/dev_name + + echo 1 > "${NETCONS_PATH}"/enabled +} + +function cleanup() { + local NSIM_DEV_SYS_DEL="/sys/bus/netdevsim/del_device" + + # delete netconsole dynamic reconfiguration + echo 0 > "${NETCONS_PATH}"/enabled + # Remove the configfs entry + rmdir "${NETCONS_PATH}" + + # Delete netdevsim devices + echo "$NSIM_DEV_2_ID" > "$NSIM_DEV_SYS_DEL" + echo "$NSIM_DEV_1_ID" > "$NSIM_DEV_SYS_DEL" + + # this is coming from lib.sh + cleanup_all_ns +} + +function listen_port_and_save_to() { + local OUTPUT=${1} + # Just wait for 2 seconds + timeout 2 ip netns exec "${NAMESPACE}" \ + socat UDP-LISTEN:"${PORT}",fork "${OUTPUT}" +} + +function validate_result() { + local TMPFILENAME="$1" + + # Check if the file exists + if [ ! -f "$TMPFILENAME" ]; then + echo "FAIL: File was not generated." >&2 + exit "${ksft_fail}" + fi + + if ! grep -q "${MSG}" "${TMPFILENAME}"; then + echo "FAIL: ${MSG} not found in ${TMPFILENAME}" >&2 + cat "${TMPFILENAME}" >&2 + exit "${ksft_fail}" + fi + + # Delete the file once it is validated, otherwise keep it + # for debugging purposes + rm "${TMPFILENAME}" + exit "${ksft_pass}" +} + +function check_for_dependencies() { + if [ "$(id -u)" -ne 0 ]; then + echo "This test must be run as root" >&2 + exit "${ksft_skip}" + fi + + if ! which socat > /dev/null ; then + echo "SKIP: socat(1) is not available" >&2 + exit "${ksft_skip}" + fi + + if ! which ip > /dev/null ; then + echo "SKIP: ip(1) is not available" >&2 + exit "${ksft_skip}" + fi + + if ! which udevadm > /dev/null ; then + echo "SKIP: udevadm(1) is not available" >&2 + exit "${ksft_skip}" + fi + + if [ ! -d "${NETCONS_CONFIGFS}" ]; then + echo "SKIP: directory ${NETCONS_CONFIGFS} does not exist. Check if NETCONSOLE_DYNAMIC is enabled" >&2 + exit "${ksft_skip}" + fi + + if ip link show "${DSTIF}" 2> /dev/null; then + echo "SKIP: interface ${DSTIF} exists in the system. Not overwriting it." >&2 + exit "${ksft_skip}" + fi +} + +# ========== # +# Start here # +# ========== # +modprobe netdevsim 2> /dev/null || true +modprobe netconsole 2 > /dev/null || true + +# The content of kmsg will be save to the following file +OUTPUT_FILE="/tmp/${TARGET}" + +# Check for basic system dependency and exit if not found +check_for_dependencies +# Set current loglevel to KERN_INFO(6), and default to KERN_NOTICE(5) +echo "6 5" > /proc/sys/kernel/printk +# Remove the namespace, interfaces and netconsole target on exit +trap cleanup EXIT +# Create one namespace and two interfaces +set_network +# Create a dynamic target for netconsole +create_dynamic_target +# Listed for netconsole port inside the namespace and destination interface +listen_port_and_save_to "${OUTPUT_FILE}" & +# Wait for socat to start and listen to the port. +wait_local_port_listen "${NAMESPACE}" "${PORT}" udp +# Send the message +echo "${MSG}: ${TARGET}" > /dev/kmsg +# Wait until socat saves the file to disk +busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}" + +# Make sure the message was received in the dst part +# and exit +validate_result "${OUTPUT_FILE}" -- 2.43.5

4 months, 1 week

3
3
0 0

kselftest/next build: 7 builds: 2 failed, 5 passed, 1 warning (v6.11-rc1-15-gc049acee3c71c)

by kernelci.org bot

kselftest/next build: 7 builds: 2 failed, 5 passed, 1 warning (v6.11-rc1-15-gc049acee3c71c) Full Build Summary: https://kernelci.org/build/kselftest/branch/next/kernel/v6.11-rc1-15-gc049a… Tree: kselftest Branch: next Git Describe: v6.11-rc1-15-gc049acee3c71c Git Commit: c049acee3c71cfc26c739f82617a84e13e471a45 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Built: 4 unique architectures Build Failures Detected: arm64: defconfig+kselftest+arm64-chromebook: (clang-16) FAIL defconfig+kselftest+arm64-chromebook: (gcc-12) FAIL Warnings Detected: arm64: arm: i386: x86_64: x86_64_defconfig+kselftest (clang-16): 1 warning Warnings summary: 1 vmlinux.o: warning: objtool: set_ftrace_ops_ro+0x39: relocation to !ENDBR: .text+0x14ef94 ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- defconfig+kselftest (arm64, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, gcc-12) — FAIL, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, clang-16) — FAIL, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- i386_defconfig+kselftest (i386, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v7_defconfig+kselftest (arm, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, clang-16) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: vmlinux.o: warning: objtool: set_ftrace_ops_ro+0x39: relocation to !ENDBR: .text+0x14ef94 --- For more info write to <info(a)kernelci.org>

4 months, 1 week

1
0
0 0

[PATCH] selftests/ftrace: Fix test to handle both old and new kernels

by Steven Rostedt

From: "Steven Rostedt (Google)" <rostedt(a)goodmis.org> The function "scheduler_tick" was renamed to "sched_tick" and a selftest that used that function for testing function trace filtering used that function as part of the test. But the change causes it to fail when run on older kernels. As tests should not fail on older kernels, add a check to see which name is available before testing. Fixes: 86dd6c04ef9f2 ("sched/balancing: Rename scheduler_tick() => sched_tick()") Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> --- .../ftrace/test.d/ftrace/func_set_ftrace_file.tc | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc index 073a748b9380..263f6b798c85 100644 --- a/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc +++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc @@ -19,7 +19,14 @@ fail() { # mesg FILTER=set_ftrace_filter FUNC1="schedule" -FUNC2="sched_tick" +if grep '^sched_tick\b' available_filter_functions; then + FUNC2="sched_tick" +elif grep '^scheduler_tick\b' available_filter_functions; then + FUNC2="scheduler_tick" +else + exit_unresolved +fi + ALL_FUNCS="#### all functions enabled ####" -- 2.43.0

4 months, 1 week

2
3
0 0

[PATCH net-next v2] selftests: net: add helper for checking if nettest is available

by Jakub Kicinski

A few tests check if nettest exists in the $PATH before adding $PWD to $PATH and re-checking. They don't discard stderr on the first check (and nettest is built as part of selftests, so it's pretty normal for it to not be available in system $PATH). This leads to output noise: which: no nettest in (/home/virtme/tools/fs/bin:/home/virtme/tools/fs/sbin:/home/virtme/tools/fs/usr/bin:/home/virtme/tools/fs/usr/sbin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin) Add a common helper for the check which does silence stderr. There is another small functional change hiding here, because pmtu.sh and fib_rule_tests.sh used to return from the test case rather than completely exit. Building nettest is not hard, there should be no need to maintain the ability to selectively skip cases in its absence. Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- v2: - fold in the changes from Ido v1: https://lore.kernel.org/20240817183848.658443-1-kuba@kernel.org CC: shuah(a)kernel.org CC: linux-kselftest(a)vger.kernel.org CC: Ido Schimmel <idosch(a)idosch.org> --- tools/testing/selftests/net/fcnal-test.sh | 9 +---- tools/testing/selftests/net/fib_rule_tests.sh | 37 +------------------ tools/testing/selftests/net/lib.sh | 15 ++++++++ tools/testing/selftests/net/pmtu.sh | 8 +--- tools/testing/selftests/net/settings | 1 + .../selftests/net/unicast_extensions.sh | 9 +---- .../selftests/net/vrf_route_leaking.sh | 3 +- 7 files changed, 23 insertions(+), 59 deletions(-) diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index 386ebd829df5..899dbad0104b 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -4304,14 +4304,7 @@ elif [ "$TESTS" = "ipv6" ]; then TESTS="$TESTS_IPV6" fi -# nettest can be run from PATH or from same directory as this selftest -if ! which nettest >/dev/null; then - PATH=$PWD:$PATH - if ! which nettest >/dev/null; then - echo "'nettest' command not found; skipping tests" - exit $ksft_skip - fi -fi +check_gen_prog "nettest" declare -i nfail=0 declare -i nsuccess=0 diff --git a/tools/testing/selftests/net/fib_rule_tests.sh b/tools/testing/selftests/net/fib_rule_tests.sh index 89034c5b69dc..53c5c1ad437e 100755 --- a/tools/testing/selftests/net/fib_rule_tests.sh +++ b/tools/testing/selftests/net/fib_rule_tests.sh @@ -51,31 +51,6 @@ log_test() fi } -check_nettest() -{ - if which nettest > /dev/null 2>&1; then - return 0 - fi - - # Add the selftest directory to PATH if not already done - if [ "${SELFTEST_PATH}" = "" ]; then - SELFTEST_PATH="$(dirname $0)" - PATH="${PATH}:${SELFTEST_PATH}" - - # Now retry with the new path - if which nettest > /dev/null 2>&1; then - return 0 - fi - - if [ "${ret}" -eq 0 ]; then - ret="${ksft_skip}" - fi - echo "nettest not found (try 'make -C ${SELFTEST_PATH} nettest')" - fi - - return 1 -} - setup() { set -e @@ -317,11 +292,6 @@ fib_rule6_connect_test() echo echo "IPv6 FIB rule connect tests" - if ! check_nettest; then - echo "SKIP: Could not run test without nettest tool" - return - fi - setup_peer $IP -6 rule add dsfield 0x04 table $RTABLE_PEER @@ -516,11 +486,6 @@ fib_rule4_connect_test() echo echo "IPv4 FIB rule connect tests" - if ! check_nettest; then - echo "SKIP: Could not run test without nettest tool" - return - fi - setup_peer $IP -4 rule add dsfield 0x04 table $RTABLE_PEER @@ -584,6 +549,8 @@ if [ ! -x "$(command -v ip)" ]; then exit $ksft_skip fi +check_gen_prog "nettest" + # start clean cleanup &> /dev/null setup diff --git a/tools/testing/selftests/net/lib.sh b/tools/testing/selftests/net/lib.sh index 8ee4489238ca..be8707bfb46e 100644 --- a/tools/testing/selftests/net/lib.sh +++ b/tools/testing/selftests/net/lib.sh @@ -125,6 +125,21 @@ slowwait_for_counter() slowwait "$timeout" until_counter_is ">= $((base + delta))" "$@" } +# Check for existence of tools which are built as part of selftests +# but may also already exist in $PATH +check_gen_prog() +{ + local prog_name=$1; shift + + if ! which $prog_name >/dev/null 2>/dev/null; then + PATH=$PWD:$PATH + if ! which $prog_name >/dev/null; then + echo "'$prog_name' command not found; skipping tests" + exit $ksft_skip + fi + fi +} + remove_ns_list() { local item=$1 diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh index 24a50622406c..569bce8b6383 100755 --- a/tools/testing/selftests/net/pmtu.sh +++ b/tools/testing/selftests/net/pmtu.sh @@ -681,13 +681,7 @@ setup_xfrm() { } setup_nettest_xfrm() { - if ! which nettest >/dev/null; then - PATH=$PWD:$PATH - if ! which nettest >/dev/null; then - echo "'nettest' command not found; skipping tests" - return 1 - fi - fi + check_gen_prog "nettest" [ ${1} -eq 6 ] && proto="-6" || proto="" port=${2} diff --git a/tools/testing/selftests/net/settings b/tools/testing/selftests/net/settings index ed8418e8217a..a38764182822 100644 --- a/tools/testing/selftests/net/settings +++ b/tools/testing/selftests/net/settings @@ -1 +1,2 @@ timeout=3600 +profile=1 diff --git a/tools/testing/selftests/net/unicast_extensions.sh b/tools/testing/selftests/net/unicast_extensions.sh index f52aa5f7da52..3e751234ccfe 100755 --- a/tools/testing/selftests/net/unicast_extensions.sh +++ b/tools/testing/selftests/net/unicast_extensions.sh @@ -30,14 +30,7 @@ source lib.sh -# nettest can be run from PATH or from same directory as this selftest -if ! which nettest >/dev/null; then - PATH=$PWD:$PATH - if ! which nettest >/dev/null; then - echo "'nettest' command not found; skipping tests" - exit $ksft_skip - fi -fi +check_gen_prog "nettest" result=0 diff --git a/tools/testing/selftests/net/vrf_route_leaking.sh b/tools/testing/selftests/net/vrf_route_leaking.sh index 152171fb1fc8..e9c2f71da207 100755 --- a/tools/testing/selftests/net/vrf_route_leaking.sh +++ b/tools/testing/selftests/net/vrf_route_leaking.sh @@ -59,7 +59,6 @@ # while it is forwarded between different vrfs. source lib.sh -PATH=$PWD:$PWD/tools/testing/selftests/net:$PATH VERBOSE=0 PAUSE_ON_FAIL=no DEFAULT_TTYPE=sym @@ -636,6 +635,8 @@ EOF # Some systems don't have a ping6 binary anymore command -v ping6 > /dev/null 2>&1 && ping6=$(command -v ping6) || ping6=$(command -v ping) +check_gen_prog "nettest" + TESTS_IPV4="ipv4_ping_ttl ipv4_traceroute ipv4_ping_frag ipv4_ping_local ipv4_tcp_local ipv4_udp_local ipv4_ping_ttl_asym ipv4_traceroute_asym" TESTS_IPV6="ipv6_ping_ttl ipv6_traceroute ipv6_ping_local ipv6_tcp_local ipv6_udp_local -- 2.46.0

4 months, 1 week

3
5
0 0

[PATCH net 00/14] mptcp: pm: fix IDs not being reusable

by Matthieu Baerts (NGI0)

Here are more fixes for the MPTCP in-kernel path-manager. In this series, the fixes are around the endpoint IDs not being reusable for on-going connections when re-creating endpoints with previously used IDs. - Patch 1 fixes this case for endpoints being used to send ADD_ADDR. Patch 2 validates this fix. The issue is present since v5.10. - Patch 3 fixes this case for endpoints being used to establish new subflows. Patch 4 validates this fix. The issue is present since v5.10. - Patch 5 fixes this case when all endpoints are flushed. Patch 6 validates this fix. The issue is present since v5.13. - Patch 7 removes a helper that is confusing, and introduced in v5.10. It helps simplifying the next patches. - Patch 8 makes sure a 'subflow' counter is only decremented when removing a 'subflow' endpoint. Can be backported up to v5.13. - Patch 9 is similar, but for a 'signal' counter. Can be backported up to v5.10. - Patch 10 checks the last max accepted ADD_ADDR limit before accepting new ADD_ADDR. For v5.10 as well. - Patch 11 removes a wrong restriction for the userspace PM, added during a refactoring in v6.5. - Patch 12 makes sure the fullmesh mode sets the ID 0 when a new subflow using the source address of the initial subflow is created. Patch 13 covers this case. This issue is present since v5.15. - Patch 14 avoid possible UaF when selecting an address from the endpoints list. Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Matthieu Baerts (NGI0) (14): mptcp: pm: re-using ID of unused removed ADD_ADDR selftests: mptcp: join: check re-using ID of unused ADD_ADDR mptcp: pm: re-using ID of unused removed subflows selftests: mptcp: join: check re-using ID of closed subflow mptcp: pm: re-using ID of unused flushed subflows selftests: mptcp: join: test for flush/re-add endpoints mptcp: pm: remove mptcp_pm_remove_subflow() mptcp: pm: only mark 'subflow' endp as available mptcp: pm: only decrement add_addr_accepted for MPJ req mptcp: pm: check add_addr_accept_max before accepting new ADD_ADDR mptcp: pm: only in-kernel cannot have entries with ID 0 mptcp: pm: fullmesh: select the right ID later selftests: mptcp: join: validate fullmesh endp on 1st sf mptcp: pm: avoid possible UaF when selecting endp net/mptcp/pm.c | 13 --- net/mptcp/pm_netlink.c | 142 ++++++++++++++++-------- net/mptcp/protocol.h | 3 - tools/testing/selftests/net/mptcp/mptcp_join.sh | 76 +++++++++++-- 4 files changed, 160 insertions(+), 74 deletions(-) --- base-commit: 565d121b69980637f040eb4d84289869cdaabedf change-id: 20240819-net-mptcp-pm-reusing-id-eb08827b7be6 Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

4 months, 1 week

2
15
0 0

kselftest/next kselftest-lkdtm: 1 runs, 1 regressions (v6.11-rc1-13-g41f37c852ac3f)

by kernelci.org bot

kselftest/next kselftest-lkdtm: 1 runs, 1 regressions (v6.11-rc1-13-g41f37c852ac3f) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions ----------------------------+------+-------------+----------+------------------------------+------------ stm32mp157a-dhcor-avenger96 | arm | lab-broonie | gcc-12 | multi_v7_defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/next/kernel/v6.11-rc1-13-g41… Test: kselftest-lkdtm Tree: kselftest Branch: next Describe: v6.11-rc1-13-g41f37c852ac3f URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: 41f37c852ac3fbfd072a00281b60dc7ba056be8c Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions ----------------------------+------+-------------+----------+------------------------------+------------ stm32mp157a-dhcor-avenger96 | arm | lab-broonie | gcc-12 | multi_v7_defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/66c5128498efe3795cc86925 Results: 0 PASS, 1 FAIL, 0 SKIP Full config: multi_v7_defconfig+kselftest Compiler: gcc-12 (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0) Plain log: https://storage.kernelci.org//kselftest/next/v6.11-rc1-13-g41f37c852ac3f/ar… HTML log: https://storage.kernelci.org//kselftest/next/v6.11-rc1-13-g41f37c852ac3f/ar… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bookworm-kselftest/2024031… * kselftest-lkdtm.login: https://kernelci.org/test/case/id/66c5128498efe3795cc86926 failing since 21 days (last pass: v6.10-rc7-29-gdf09b0bb09ea, first fail: v6.11-rc1)

4 months, 1 week

1
0
0 0

kselftest/next kselftest-lib: 1 runs, 1 regressions (v6.11-rc1-13-g41f37c852ac3f)

by kernelci.org bot

kselftest/next kselftest-lib: 1 runs, 1 regressions (v6.11-rc1-13-g41f37c852ac3f) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions ----------------------------+------+-------------+----------+------------------------------+------------ stm32mp157a-dhcor-avenger96 | arm | lab-broonie | gcc-12 | multi_v7_defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/next/kernel/v6.11-rc1-13-g41… Test: kselftest-lib Tree: kselftest Branch: next Describe: v6.11-rc1-13-g41f37c852ac3f URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: 41f37c852ac3fbfd072a00281b60dc7ba056be8c Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions ----------------------------+------+-------------+----------+------------------------------+------------ stm32mp157a-dhcor-avenger96 | arm | lab-broonie | gcc-12 | multi_v7_defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/66c5140122b4b11599c8685e Results: 0 PASS, 1 FAIL, 0 SKIP Full config: multi_v7_defconfig+kselftest Compiler: gcc-12 (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0) Plain log: https://storage.kernelci.org//kselftest/next/v6.11-rc1-13-g41f37c852ac3f/ar… HTML log: https://storage.kernelci.org//kselftest/next/v6.11-rc1-13-g41f37c852ac3f/ar… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bookworm-kselftest/2024031… * kselftest-lib.login: https://kernelci.org/test/case/id/66c5140122b4b11599c8685f failing since 21 days (last pass: v6.10-rc7-29-gdf09b0bb09ea, first fail: v6.11-rc1)

4 months, 1 week

1
0
0 0

kselftest/next kselftest-seccomp: 1 runs, 1 regressions (v6.11-rc1-13-g41f37c852ac3f)

by kernelci.org bot

kselftest/next kselftest-seccomp: 1 runs, 1 regressions (v6.11-rc1-13-g41f37c852ac3f) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions ----------------------------+------+-------------+----------+------------------------------+------------ stm32mp157a-dhcor-avenger96 | arm | lab-broonie | gcc-12 | multi_v7_defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/next/kernel/v6.11-rc1-13-g41… Test: kselftest-seccomp Tree: kselftest Branch: next Describe: v6.11-rc1-13-g41f37c852ac3f URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: 41f37c852ac3fbfd072a00281b60dc7ba056be8c Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions ----------------------------+------+-------------+----------+------------------------------+------------ stm32mp157a-dhcor-avenger96 | arm | lab-broonie | gcc-12 | multi_v7_defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/66c5157c7ea50df009c86855 Results: 0 PASS, 1 FAIL, 0 SKIP Full config: multi_v7_defconfig+kselftest Compiler: gcc-12 (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0) Plain log: https://storage.kernelci.org//kselftest/next/v6.11-rc1-13-g41f37c852ac3f/ar… HTML log: https://storage.kernelci.org//kselftest/next/v6.11-rc1-13-g41f37c852ac3f/ar… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bookworm-kselftest/2024031… * kselftest-seccomp.login: https://kernelci.org/test/case/id/66c5157c7ea50df009c86856 failing since 21 days (last pass: v6.10-rc7-29-gdf09b0bb09ea, first fail: v6.11-rc1)

4 months, 1 week

1
0
0 0

[PATCH net-next] selftests: net/forwarding: spawn sh inside vrf to speed up ping loop

by Jakub Kicinski

Looking at timestamped output of netdev CI reveals that most of the time in forwarding tests for custom route hashing is spent on a single case, namely the test which uses ping (mausezahn does not support flow labels). On a non-debug kernel we spend 714 of 730 total test runtime (97%) on this test case. While having flow label support in a traffic gen tool / mausezahn would be best, we can significantly speed up the loop by putting ip vrf exec outside of the iteration. In a test of 1000 pings using a normal loop takes 50 seconds to finish. While using: ip vrf exec $vrf sh -c "$loop-body" takes 12 seconds (1/4 of the time). Some of the slowness is likely due to our inefficient virtualization setup, but even on my laptop running "ip link help" 16k times takes 25-30 seconds, so I think it's worth optimizing even for fastest setups. Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: shuah(a)kernel.org CC: idosch(a)nvidia.com CC: linux-kselftest(a)vger.kernel.org --- .../selftests/net/forwarding/custom_multipath_hash.sh | 8 ++++---- .../selftests/net/forwarding/gre_custom_multipath_hash.sh | 8 ++++---- .../net/forwarding/ip6gre_custom_multipath_hash.sh | 8 ++++---- 3 files changed, 12 insertions(+), 12 deletions(-) diff --git a/tools/testing/selftests/net/forwarding/custom_multipath_hash.sh b/tools/testing/selftests/net/forwarding/custom_multipath_hash.sh index 1783c10215e5..7d531f7091e6 100755 --- a/tools/testing/selftests/net/forwarding/custom_multipath_hash.sh +++ b/tools/testing/selftests/net/forwarding/custom_multipath_hash.sh @@ -224,10 +224,10 @@ send_dst_ipv6() send_flowlabel() { # Generate 16384 echo requests, each with a random flow label. - for _ in $(seq 1 16384); do - ip vrf exec v$h1 \ - $PING6 2001:db8:4::2 -F 0 -c 1 -q >/dev/null 2>&1 - done + ip vrf exec v$h1 sh -c \ + "for _ in {1..16384}; do \ + $PING6 2001:db8:4::2 -F 0 -c 1 -q >/dev/null 2>&1; \ + done" } send_src_udp6() diff --git a/tools/testing/selftests/net/forwarding/gre_custom_multipath_hash.sh b/tools/testing/selftests/net/forwarding/gre_custom_multipath_hash.sh index 9788bd0f6e8b..dda11a4a9450 100755 --- a/tools/testing/selftests/net/forwarding/gre_custom_multipath_hash.sh +++ b/tools/testing/selftests/net/forwarding/gre_custom_multipath_hash.sh @@ -319,10 +319,10 @@ send_dst_ipv6() send_flowlabel() { # Generate 16384 echo requests, each with a random flow label. - for _ in $(seq 1 16384); do - ip vrf exec v$h1 \ - $PING6 2001:db8:2::2 -F 0 -c 1 -q >/dev/null 2>&1 - done + ip vrf exec v$h1 sh -c \ + "for _ in {1..16384}; do \ + $PING6 2001:db8:2::2 -F 0 -c 1 -q >/dev/null 2>&1; \ + done" } send_src_udp6() diff --git a/tools/testing/selftests/net/forwarding/ip6gre_custom_multipath_hash.sh b/tools/testing/selftests/net/forwarding/ip6gre_custom_multipath_hash.sh index 2ab9eaaa5532..e28b4a079e52 100755 --- a/tools/testing/selftests/net/forwarding/ip6gre_custom_multipath_hash.sh +++ b/tools/testing/selftests/net/forwarding/ip6gre_custom_multipath_hash.sh @@ -321,10 +321,10 @@ send_dst_ipv6() send_flowlabel() { # Generate 16384 echo requests, each with a random flow label. - for _ in $(seq 1 16384); do - ip vrf exec v$h1 \ - $PING6 2001:db8:2::2 -F 0 -c 1 -q >/dev/null 2>&1 - done + ip vrf exec v$h1 sh -c \ + "for _ in {1..16384}; do \ + $PING6 2001:db8:2::2 -F 0 -c 1 -q >/dev/null 2>&1; \ + done" } send_src_udp6() -- 2.46.0

4 months, 1 week

4
3
0 0

[PATCH v2] kunit: Device wrappers should also manage driver name

by David Gow

kunit_driver_create() accepts a name for the driver, but does not copy it, so if that name is either on the stack, or otherwise freed, we end up with a use-after-free when the driver is cleaned up. Instead, strdup() the name, and manage it as another KUnit allocation. As there was no existing kunit_kstrdup(), we add one. Further, add a kunit_ variant of strdup_const() and kfree_const(), so we don't need to allocate and manage the string in the majority of cases where it's a constant. However, these are inline functions, and is_kernel_rodata() only works for built-in code. This causes problems in two cases: - If kunit is built as a module, __{start,end}_rodata is not defined. - If a kunit test using these functions is built as a module, it will suffer the same fate. This fixes a KASAN splat with overflow.overflow_allocation_test, when built as a module. Restrict the is_kernel_rodata() case to when KUnit is built as a module, which fixes the first case, at the cost of losing the optimisation. Also, make kunit_{kstrdup,kfree}_const non-inline, so that other modules using them will not accidentally depend on is_kernel_rodata(). If KUnit is built-in, they'll benefit from the optimisation, if KUnit is not, they won't, but the string will be properly duplicated. Fixes: d03c720e03bd ("kunit: Add APIs for managing devices") Reported-by: Nico Pache <npache(a)redhat.com> Closes: https://groups.google.com/g/kunit-dev/c/81V9b9QYON0 Reviewed-by: Kees Cook <kees(a)kernel.org> Reviewed-by: Maxime Ripard <mripard(a)kernel.org> Reviewed-by: Rae Moar <rmoar(a)google.com> Signed-off-by: David Gow <davidgow(a)google.com> --- This is a combination of the previous version of this patch with the follow-up fix "kunit: Fix kunit_kstrdup_const() with modules". kunit_kstrdup_const() now falls back to kstrdup() if KUnit is built as a module, and is no longer inlined. This should fix the issues we'd seen before. I've not tried doing something fancy by looking at module rodata sections: it might be a possible optimisation, but it seems like it'd overcomplicate things for this initial change. If we hit a KUnit test where this is a bottleneck (or if I have some more spare time), we can look into it. The overflow_kunit test has been fixed independently to not rely on this anyway, so there shouldn't be any current cases of this causing issues, but it's worth making the API robust regardless. Changes since previous version: https://lore.kernel.org/linux-kselftest/20240731070207.3918687-1-davidgow@g… - Fix module support by integrating: https://lore.kernel.org/linux-kselftest/20240806020136.3481593-1-davidgow@g… --- include/kunit/test.h | 48 ++++++++++++++++++++++++++++++++++++++++++++ lib/kunit/device.c | 7 +++++-- lib/kunit/test.c | 19 ++++++++++++++++++ 3 files changed, 72 insertions(+), 2 deletions(-) diff --git a/include/kunit/test.h b/include/kunit/test.h index e2a1f0928e8b..5ac237c949a0 100644 --- a/include/kunit/test.h +++ b/include/kunit/test.h @@ -28,6 +28,7 @@ #include <linux/types.h> #include <asm/rwonce.h> +#include <asm/sections.h> /* Static key: true if any KUnit tests are currently running */ DECLARE_STATIC_KEY_FALSE(kunit_running); @@ -480,6 +481,53 @@ static inline void *kunit_kcalloc(struct kunit *test, size_t n, size_t size, gfp return kunit_kmalloc_array(test, n, size, gfp | __GFP_ZERO); } + +/** + * kunit_kfree_const() - conditionally free test managed memory + * @x: pointer to the memory + * + * Calls kunit_kfree() only if @x is not in .rodata section. + * See kunit_kstrdup_const() for more information. + */ +void kunit_kfree_const(struct kunit *test, const void *x); + +/** + * kunit_kstrdup() - Duplicates a string into a test managed allocation. + * + * @test: The test context object. + * @str: The NULL-terminated string to duplicate. + * @gfp: flags passed to underlying kmalloc(). + * + * See kstrdup() and kunit_kmalloc_array() for more information. + */ +static inline char *kunit_kstrdup(struct kunit *test, const char *str, gfp_t gfp) +{ + size_t len; + char *buf; + + if (!str) + return NULL; + + len = strlen(str) + 1; + buf = kunit_kmalloc(test, len, gfp); + if (buf) + memcpy(buf, str, len); + return buf; +} + +/** + * kunit_kstrdup_const() - Conditionally duplicates a string into a test managed allocation. + * + * @test: The test context object. + * @str: The NULL-terminated string to duplicate. + * @gfp: flags passed to underlying kmalloc(). + * + * Calls kunit_kstrdup() only if @str is not in the rodata section. Must be freed with + * kunit_kfree_const() -- not kunit_kfree(). + * See kstrdup_const() and kunit_kmalloc_array() for more information. + */ +const char *kunit_kstrdup_const(struct kunit *test, const char *str, gfp_t gfp); + /** * kunit_vm_mmap() - Allocate KUnit-tracked vm_mmap() area * @test: The test context object. diff --git a/lib/kunit/device.c b/lib/kunit/device.c index 25c81ed465fb..520c1fccee8a 100644 --- a/lib/kunit/device.c +++ b/lib/kunit/device.c @@ -89,7 +89,7 @@ struct device_driver *kunit_driver_create(struct kunit *test, const char *name) if (!driver) return ERR_PTR(err); - driver->name = name; + driver->name = kunit_kstrdup_const(test, name, GFP_KERNEL); driver->bus = &kunit_bus_type; driver->owner = THIS_MODULE; @@ -192,8 +192,11 @@ void kunit_device_unregister(struct kunit *test, struct device *dev) const struct device_driver *driver = to_kunit_device(dev)->driver; kunit_release_action(test, device_unregister_wrapper, dev); - if (driver) + if (driver) { + const char *driver_name = driver->name; kunit_release_action(test, driver_unregister_wrapper, (void *)driver); + kunit_kfree_const(test, driver_name); + } } EXPORT_SYMBOL_GPL(kunit_device_unregister); diff --git a/lib/kunit/test.c b/lib/kunit/test.c index e8b1b52a19ab..089c832e3cdb 100644 --- a/lib/kunit/test.c +++ b/lib/kunit/test.c @@ -874,6 +874,25 @@ void kunit_kfree(struct kunit *test, const void *ptr) } EXPORT_SYMBOL_GPL(kunit_kfree); +void kunit_kfree_const(struct kunit *test, const void *x) +{ +#if !IS_MODULE(CONFIG_KUNIT) + if (!is_kernel_rodata((unsigned long)x)) +#endif + kunit_kfree(test, x); +} +EXPORT_SYMBOL_GPL(kunit_kfree_const); + +const char *kunit_kstrdup_const(struct kunit *test, const char *str, gfp_t gfp) +{ +#if !IS_MODULE(CONFIG_KUNIT) + if (is_kernel_rodata((unsigned long)str)) + return str; +#endif + return kunit_kstrdup(test, str, gfp); +} +EXPORT_SYMBOL_GPL(kunit_kstrdup_const); + void kunit_cleanup(struct kunit *test) { struct kunit_resource *res; -- 2.46.0.184.g6999bdac58-goog

4 months, 1 week

3
2
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror August 2024