June 2024 - Linux-kselftest-mirror

[PATCH] selftests: openat2: don't print total number of tests and then skip

by Muhammad Usama Anjum

Don't print that 88 sub-tests are going to be executed. But then skip. The error is printed that executed test was only 1 while 88 should have run: Old output: TAP version 13 1..88 ok 2 # SKIP all tests require euid == 0 # Planned tests != run tests (88 != 1) # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:1 error:0 New and correct output: TAP version 13 1..0 # SKIP all tests require euid == 0 Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- tools/testing/selftests/openat2/resolve_test.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/openat2/resolve_test.c b/tools/testing/selftests/openat2/resolve_test.c index bbafad440893c..5472ec478d227 100644 --- a/tools/testing/selftests/openat2/resolve_test.c +++ b/tools/testing/selftests/openat2/resolve_test.c @@ -508,12 +508,13 @@ void test_openat2_opath_tests(void) int main(int argc, char **argv) { ksft_print_header(); - ksft_set_plan(NUM_TESTS); /* NOTE: We should be checking for CAP_SYS_ADMIN here... */ - if (geteuid() != 0) + if (geteuid()) ksft_exit_skip("all tests require euid == 0\n"); + ksft_set_plan(NUM_TESTS); + test_openat2_opath_tests(); if (ksft_get_fail_cnt() + ksft_get_error_cnt() > 0) -- 2.39.2

1 year, 1 month

3
6
0 0

[PATCH 1/2] selftests/thermel/intel: conform the test to TAP output

by Muhammad Usama Anjum

Conform the layout, informational and status messages to TAP. No functional change is intended other than the layout of output messages. Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- .../intel/workload_hint/workload_hint_test.c | 98 ++++++++----------- 1 file changed, 39 insertions(+), 59 deletions(-) diff --git a/tools/testing/selftests/thermal/intel/workload_hint/workload_hint_test.c b/tools/testing/selftests/thermal/intel/workload_hint/workload_hint_test.c index 217c3a641c537..d107c2d6f3a22 100644 --- a/tools/testing/selftests/thermal/intel/workload_hint/workload_hint_test.c +++ b/tools/testing/selftests/thermal/intel/workload_hint/workload_hint_test.c @@ -9,6 +9,7 @@ #include <fcntl.h> #include <poll.h> #include <signal.h> +#include "../../../kselftest.h" #define WORKLOAD_NOTIFICATION_DELAY_ATTRIBUTE "/sys/bus/pci/devices/0000:00:04.0/workload_hint/notification_delay_ms" #define WORKLOAD_ENABLE_ATTRIBUTE "/sys/bus/pci/devices/0000:00:04.0/workload_hint/workload_hint_enable" @@ -31,17 +32,13 @@ void workload_hint_exit(int signum) /* Disable feature via sysfs knob */ fd = open(WORKLOAD_ENABLE_ATTRIBUTE, O_RDWR); - if (fd < 0) { - perror("Unable to open workload type feature enable file\n"); - exit(1); - } + if (fd < 0) + ksft_exit_fail_perror("Unable to open workload type feature enable file"); - if (write(fd, "0\n", 2) < 0) { - perror("Can' disable workload hints\n"); - exit(1); - } + if (write(fd, "0\n", 2) < 0) + ksft_exit_fail_perror("Can' disable workload hints"); - printf("Disabled workload type prediction\n"); + ksft_print_msg("Disabled workload type prediction\n"); close(fd); } @@ -54,32 +51,27 @@ int main(int argc, char **argv) char delay_str[64]; int delay = 0; - printf("Usage: workload_hint_test [notification delay in milli seconds]\n"); + ksft_print_header(); + ksft_set_plan(1); + + ksft_print_msg("Usage: workload_hint_test [notification delay in milli seconds]\n"); if (argc > 1) { ret = sscanf(argv[1], "%d", &delay); - if (ret < 0) { - printf("Invalid delay\n"); - exit(1); - } + if (ret < 0) + ksft_exit_fail_perror("Invalid delay"); - printf("Setting notification delay to %d ms\n", delay); + ksft_print_msg("Setting notification delay to %d ms\n", delay); if (delay < 0) - exit(1); - - sprintf(delay_str, "%s\n", argv[1]); + ksft_exit_fail_msg("delay can never be negative\n"); sprintf(delay_str, "%s\n", argv[1]); fd = open(WORKLOAD_NOTIFICATION_DELAY_ATTRIBUTE, O_RDWR); - if (fd < 0) { - perror("Unable to open workload notification delay\n"); - exit(1); - } + if (fd < 0) + ksft_exit_fail_perror("Unable to open workload notification delay"); - if (write(fd, delay_str, strlen(delay_str)) < 0) { - perror("Can't set delay\n"); - exit(1); - } + if (write(fd, delay_str, strlen(delay_str)) < 0) + ksft_exit_fail_perror("Can't set delay"); close(fd); } @@ -93,63 +85,51 @@ int main(int argc, char **argv) /* Enable feature via sysfs knob */ fd = open(WORKLOAD_ENABLE_ATTRIBUTE, O_RDWR); - if (fd < 0) { - perror("Unable to open workload type feature enable file\n"); - exit(1); - } + if (fd < 0) + ksft_exit_fail_perror("Unable to open workload type feature enable file"); - if (write(fd, "1\n", 2) < 0) { - perror("Can' enable workload hints\n"); - exit(1); - } + if (write(fd, "1\n", 2) < 0) + ksft_exit_fail_perror("Can' enable workload hints"); close(fd); - printf("Enabled workload type prediction\n"); + ksft_print_msg("Enabled workload type prediction\n"); while (1) { fd = open(WORKLOAD_TYPE_INDEX_ATTRIBUTE, O_RDONLY); - if (fd < 0) { - perror("Unable to open workload type file\n"); - exit(1); - } + if (fd < 0) + ksft_exit_fail_perror("Unable to open workload type file"); - if ((lseek(fd, 0L, SEEK_SET)) < 0) { - fprintf(stderr, "Failed to set pointer to beginning\n"); - exit(1); - } + if ((lseek(fd, 0L, SEEK_SET)) < 0) + ksft_exit_fail_perror("Failed to set pointer to beginning"); - if (read(fd, index_str, sizeof(index_str)) < 0) { - fprintf(stderr, "Failed to read from:%s\n", - WORKLOAD_TYPE_INDEX_ATTRIBUTE); - exit(1); - } + if (read(fd, index_str, sizeof(index_str)) < 0) + ksft_exit_fail_perror("Failed to read from: workload_type_index"); ufd.fd = fd; ufd.events = POLLPRI; ret = poll(&ufd, 1, -1); if (ret < 0) { - perror("poll error"); - exit(1); + ksft_exit_fail_perror("poll error"); } else if (ret == 0) { - printf("Poll Timeout\n"); + ksft_print_msg("Poll Timeout\n"); } else { - if ((lseek(fd, 0L, SEEK_SET)) < 0) { - fprintf(stderr, "Failed to set pointer to beginning\n"); - exit(1); - } + if ((lseek(fd, 0L, SEEK_SET)) < 0) + ksft_exit_fail_perror("Failed to set pointer to beginning"); - if (read(fd, index_str, sizeof(index_str)) < 0) - exit(0); + if (read(fd, index_str, sizeof(index_str)) < 0) { + ksft_test_result_pass("Successfully read\n"); + ksft_finished(); + } ret = sscanf(index_str, "%d", &index); if (ret < 0) break; if (index > WORKLOAD_TYPE_MAX_INDEX) - printf("Invalid workload type index\n"); + ksft_print_msg("Invalid workload type index\n"); else - printf("workload type:%s\n", workload_types[index]); + ksft_print_msg("workload type:%s\n", workload_types[index]); } close(fd); -- 2.39.2

1 year, 1 month

3
5
0 0

[PATCH] selftests: firmware: conform test to TAP

by Muhammad Usama Anjum

Conform the layout, informational and status messages to TAP. No functional change is intended other than the layout of output messages. Without using TAP messages, the passed/failed/skip test names cannot be found. This is a prepartory patch, more patches will be sent to comform the test completely. Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- .../selftests/firmware/fw_run_tests.sh | 63 ++++++++++++------- 1 file changed, 40 insertions(+), 23 deletions(-) diff --git a/tools/testing/selftests/firmware/fw_run_tests.sh b/tools/testing/selftests/firmware/fw_run_tests.sh index f6d95a2d51249..5063c75345680 100755 --- a/tools/testing/selftests/firmware/fw_run_tests.sh +++ b/tools/testing/selftests/firmware/fw_run_tests.sh @@ -6,6 +6,9 @@ set -e +DIR="$(dirname $(readlink -f "$0"))" +source "${DIR}"/../kselftest/ktap_helpers.sh + TEST_DIR=$(dirname $0) source $TEST_DIR/fw_lib.sh @@ -26,54 +29,68 @@ run_tests() proc_set_force_sysfs_fallback $1 proc_set_ignore_sysfs_fallback $2 $TEST_DIR/fw_upload.sh + + ktap_test_pass "Completed" } run_test_config_0001() { - echo "-----------------------------------------------------" - echo "Running kernel configuration test 1 -- rare" - echo "Emulates:" - echo "CONFIG_FW_LOADER=y" - echo "CONFIG_FW_LOADER_USER_HELPER=n" - echo "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n" + ktap_print_msg "-----------------------------------------------------" + ktap_print_msg "Running kernel configuration test 1 -- rare" + ktap_print_msg "Emulates:" + ktap_print_msg "CONFIG_FW_LOADER=y" + ktap_print_msg "CONFIG_FW_LOADER_USER_HELPER=n" + ktap_print_msg "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n" run_tests 0 1 } run_test_config_0002() { - echo "-----------------------------------------------------" - echo "Running kernel configuration test 2 -- distro" - echo "Emulates:" - echo "CONFIG_FW_LOADER=y" - echo "CONFIG_FW_LOADER_USER_HELPER=y" - echo "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n" + ktap_print_msg "-----------------------------------------------------" + ktap_print_msg "Running kernel configuration test 2 -- distro" + ktap_print_msg "Emulates:" + ktap_print_msg "CONFIG_FW_LOADER=y" + ktap_print_msg "CONFIG_FW_LOADER_USER_HELPER=y" + ktap_print_msg "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n" proc_set_ignore_sysfs_fallback 0 run_tests 0 0 } run_test_config_0003() { - echo "-----------------------------------------------------" - echo "Running kernel configuration test 3 -- android" - echo "Emulates:" - echo "CONFIG_FW_LOADER=y" - echo "CONFIG_FW_LOADER_USER_HELPER=y" - echo "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y" + ktap_print_msg "-----------------------------------------------------" + ktap_print_msg "Running kernel configuration test 3 -- android" + ktap_print_msg "Emulates:" + ktap_print_msg "CONFIG_FW_LOADER=y" + ktap_print_msg "CONFIG_FW_LOADER_USER_HELPER=y" + ktap_print_msg "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y" run_tests 1 0 } +ktap_print_header + check_mods check_setup -echo "Running namespace test: " -$TEST_DIR/fw_namespace $DIR/trigger_request -echo "OK" - if [ -f $FW_FORCE_SYSFS_FALLBACK ]; then + ktap_set_plan "4" + run_test_config_0001 run_test_config_0002 run_test_config_0003 else - echo "Running basic kernel configuration, working with your config" + ktap_set_plan "2" + + ktap_print_msg "Running basic kernel configuration, working with your config" run_tests fi + +ktap_print_msg "Running namespace test: " +$TEST_DIR/fw_namespace $DIR/trigger_request +if [ $? -eq 0 ]; then + ktap_test_pass "fw_namespace completed successfully" +else + ktap_test_fail "fw_namespace failed" +fi + +ktap_finished -- 2.39.2

1 year, 1 month

2
2
0 0

[PATCH v2 0/8] mm: workingset reporting

by Yuanchu Xie

Changes from PATCH v1 -> v2: - Updated selftest to use ksft_test_result_code instead of switch-case (Muhammad Usama Anjum) - Included more use cases in the cover letter (Huang, Ying) - Added documentation for sysfs and memcg interfaces - Added an aging-specific struct lru_gen_mm_walk in struct pglist_data to avoid allocating for each lruvec. Changes from RFC v3 -> PATCH v1: - Updated selftest to use ksft_print_msg instead of fprintf(stderr, ...) (Muhammad Usama Anjum) - Included more detail in patch skipping pmd_young with force_scan (Huang, Ying) - Deferred reaccess histogram as a followup - Removed per-memcg page age interval configs for simplicity Changes from RFC v2 -> RFC v3: - Update to v6.8 - Added an aging kernel thread (gated behind config) - Added basic selftests for sysfs interface files - Track swapped out pages for reaccesses - Refactoring and cleanup - Dropped the virtio-balloon extension to make things manageable Changes from RFC v1 -> RFC v2: - Refactored the patchs into smaller pieces - Renamed interfaces and functions from wss to wsr (Working Set Reporting) - Fixed build errors when CONFIG_WSR is not set - Changed working_set_num_bins to u8 for virtio-balloon - Added support for per-NUMA node reporting for virtio-balloon [rfc v1] https://lore.kernel.org/linux-mm/20230509185419.1088297-1-yuanchu@google.co… [rfc v2] https://lore.kernel.org/linux-mm/20230621180454.973862-1-yuanchu@google.com/ [rfc v3] https://lore.kernel.org/linux-mm/20240327213108.2384666-1-yuanchu@google.co… This patch series provides workingset reporting of user pages in lruvecs, of which coldness can be tracked by accessed bits and fd references. However, the concept of workingset applies generically to all types of memory, which could be kernel slab caches, discardable userspace caches (databases), or CXL.mem. Therefore, data sources might come from slab shrinkers, device drivers, or the userspace. IMO, the kernel should provide a set of workingset interfaces that should be generic enough to accommodate the various use cases, and be extensible to potential future use cases. The current proposed interfaces are not sufficient in that regard, but I would like to start somewhere, solicit feedback, and iterate. Use cases ========== Job scheduling On overcommitted hosts, workingset information allows the job scheduler to right-size each job and land more jobs on the same host or NUMA node, and in the case of a job with increasing workingset, policy decisions can be made to migrate other jobs off the host/NUMA node, or oom-kill the misbehaving job. If the job shape is very different from the machine shape, knowing the workingset per-node can also help inform page allocation policies. Proactive reclaim Workingset information allows the a container manager to proactively reclaim memory while not impacting a job's performance. While PSI may provide a reactive measure of when a proactive reclaim has reclaimed too much, workingset reporting allows the policy to be more accurate and flexible. Ballooning (similar to proactive reclaim) While this patch series does not extend the virtio-balloon device, balloon policies benefit from workingset to more precisely determine the size of the memory balloon. On desktops/laptops/mobile devices where memory is scarce and overcommitted, the balloon sizing in multiple VMs running on the same device can be orchestrated with workingset reports from each one. Promotion/Demotion If different mechanisms are used for promition and demotion, workingset information can help connect the two and avoid pages being migrated back and forth. For example, given a promotion hot page threshold defined in reaccess distance of N seconds (promote pages accessed more often than every N seconds). The threshold N should be set so that ~80% (e.g.) of pages on the fast memory node passes the threshold. This calculation can be done with workingset reports. To be directly useful for promotion policies, the workingset report interfaces need to be extended to report hotness and gather hotness information from the devices[1]. [1] https://www.opencompute.org/documents/ocp-cms-hotness-tracking-requirements… Sysfs and Cgroup Interfaces ========== The interfaces are detailed in the patches that introduce them. The main idea here is we break down the workingset per-node per-memcg into time intervals (ms), e.g. 1000 anon=137368 file=24530 20000 anon=34342 file=0 30000 anon=353232 file=333608 40000 anon=407198 file=206052 9223372036854775807 anon=4925624 file=892892 I realize this does not generalize well to hotness information, but I lack the intuition for an abstraction that presents hotness in a useful way. Based on a recent proposal for move_phys_pages[2], it seems like userspace tiering software would like to move specific physical pages, instead of informing the kernel "move x number of hot pages to y device". Please advise. [2] https://lore.kernel.org/lkml/20240319172609.332900-1-gregory.price@memverge… Implementation ========== Currently, the reporting of user pages is based off of MGLRU, and therefore requires CONFIG_LRU_GEN=y. We would benefit from more MGLRU generations for a more fine-grained workingset report. I will make the generation count configurable in the next version. The workingset reporting mechanism is gated behind CONFIG_WORKINGSET_REPORT, and the aging thread is behind CONFIG_WORKINGSET_REPORT_AGING. Yuanchu Xie (8): mm: multi-gen LRU: ignore non-leaf pmd_young for force_scan=true mm: aggregate working set information into histograms mm: use refresh interval to rate-limit workingset report aggregation mm: report workingset during memory pressure driven scanning mm: extend working set reporting to memcgs mm: add kernel aging thread for workingset reporting selftest: test system-wide workingset reporting Docs/admin-guide/mm/workingset_report: document sysfs and memcg interfaces Documentation/admin-guide/mm/index.rst | 1 + .../admin-guide/mm/workingset_report.rst | 105 ++++ drivers/base/node.c | 6 + include/linux/memcontrol.h | 5 + include/linux/mmzone.h | 9 + include/linux/workingset_report.h | 97 +++ mm/Kconfig | 15 + mm/Makefile | 2 + mm/internal.h | 18 + mm/memcontrol.c | 184 +++++- mm/mm_init.c | 2 + mm/mmzone.c | 2 + mm/vmscan.c | 58 +- mm/workingset_report.c | 561 ++++++++++++++++++ mm/workingset_report_aging.c | 127 ++++ tools/testing/selftests/mm/.gitignore | 1 + tools/testing/selftests/mm/Makefile | 3 + tools/testing/selftests/mm/run_vmtests.sh | 5 + .../testing/selftests/mm/workingset_report.c | 306 ++++++++++ .../testing/selftests/mm/workingset_report.h | 39 ++ .../selftests/mm/workingset_report_test.c | 329 ++++++++++ 21 files changed, 1869 insertions(+), 6 deletions(-) create mode 100644 Documentation/admin-guide/mm/workingset_report.rst create mode 100644 include/linux/workingset_report.h create mode 100644 mm/workingset_report.c create mode 100644 mm/workingset_report_aging.c create mode 100644 tools/testing/selftests/mm/workingset_report.c create mode 100644 tools/testing/selftests/mm/workingset_report.h create mode 100644 tools/testing/selftests/mm/workingset_report_test.c -- 2.45.1.467.gbab1589fc0-goog

1 year, 1 month

4
11
0 0

[PATCH v3 00/13] riscv: Add support for xtheadvector

by Charlie Jenkins

xtheadvector is a custom extension that is based upon riscv vector version 0.7.1 [1]. All of the vector routines have been modified to support this alternative vector version based upon whether xtheadvector was determined to be supported at boot. vlenb is not supported on the existing xtheadvector hardware, so a devicetree property thead,vlenb is added to provide the vlenb to Linux. There is a new hwprobe key RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0 that is used to request which thead vendor extensions are supported on the current platform. This allows future vendors to allocate hwprobe keys for their vendor. Support for xtheadvector is also added to the vector kselftests. Signed-off-by: Charlie Jenkins <charlie(a)rivosinc.com> [1] https://github.com/T-head-Semi/thead-extension-spec/blob/95358cb2cca9489361… --- This series is a continuation of a different series that was fragmented into two other series in an attempt to get part of it merged in the 6.10 merge window. The split-off series did not get merged due to a NAK on the series that added the generic riscv,vlenb devicetree entry. This series has converted riscv,vlenb to thead,vlenb to remedy this issue. The original series is titled "riscv: Support vendor extensions and xtheadvector" [3]. The series titled "riscv: Extend cpufeature.c to detect vendor extensions" is still under development and this series is based on that series! [4] I have tested this with an Allwinner Nezha board. I ran into issues booting the board after 6.9-rc1 so I applied these patches to 6.8. There are a couple of minor merge conflicts that do arrise when doing that, so please let me know if you have been able to boot this board with a 6.9 kernel. I used SkiffOS [1] to manage building the image, but upgraded the U-Boot version to Samuel Holland's more up-to-date version [2] and changed out the device tree used by U-Boot with the device trees that are present in upstream linux and this series. Thank you Samuel for all of the work you did to make this task possible. [1] https://github.com/skiffos/SkiffOS/tree/master/configs/allwinner/nezha [2] https://github.com/smaeul/u-boot/commit/2e89b706f5c956a70c989cd31665f1429e9… [3] https://lore.kernel.org/all/20240503-dev-charlie-support_thead_vector_6_9-v… [4] https://lore.kernel.org/linux-riscv/20240609-support_vendor_extensions-v2-0… --- Changes in v3: - Add back Heiko's signed-off-by (Conor) - Mark RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0 as a bitmask - Link to v2: https://lore.kernel.org/r/20240610-xtheadvector-v2-0-97a48613ad64@rivosinc.… Changes in v2: - Removed extraneous references to "riscv,vlenb" (Jess) - Moved declaration of "thead,vlenb" into cpus.yaml and added restriction that it's only applicable to thead cores (Conor) - Check CONFIG_RISCV_ISA_XTHEADVECTOR instead of CONFIG_RISCV_ISA_V for thead,vlenb (Jess) - Fix naming of hwprobe variables (Evan) - Link to v1: https://lore.kernel.org/r/20240609-xtheadvector-v1-0-3fe591d7f109@rivosinc.… --- Charlie Jenkins (12): dt-bindings: riscv: Add xtheadvector ISA extension description dt-bindings: cpus: add a thead vlen register length property riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree riscv: Add thead and xtheadvector as a vendor extension riscv: vector: Use vlenb from DT for thead riscv: csr: Add CSR encodings for VCSR_VXRM/VCSR_VXSAT riscv: Add xtheadvector instruction definitions riscv: vector: Support xtheadvector save/restore riscv: hwprobe: Add thead vendor extension probing riscv: hwprobe: Document thead vendor extensions and xtheadvector extension selftests: riscv: Fix vector tests selftests: riscv: Support xtheadvector in vector tests Heiko Stuebner (1): RISC-V: define the elements of the VCSR vector CSR Documentation/arch/riscv/hwprobe.rst | 10 + Documentation/devicetree/bindings/riscv/cpus.yaml | 19 ++ .../devicetree/bindings/riscv/extensions.yaml | 10 + arch/riscv/Kconfig.vendor | 26 ++ arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi | 3 +- arch/riscv/include/asm/cpufeature.h | 2 + arch/riscv/include/asm/csr.h | 13 + arch/riscv/include/asm/hwprobe.h | 5 +- arch/riscv/include/asm/switch_to.h | 2 +- arch/riscv/include/asm/vector.h | 249 +++++++++++++---- arch/riscv/include/asm/vendor_extensions/thead.h | 42 +++ .../include/asm/vendor_extensions/thead_hwprobe.h | 18 ++ .../include/asm/vendor_extensions/vendor_hwprobe.h | 37 +++ arch/riscv/include/uapi/asm/hwprobe.h | 3 +- arch/riscv/include/uapi/asm/vendor/thead.h | 3 + arch/riscv/kernel/cpufeature.c | 51 +++- arch/riscv/kernel/kernel_mode_vector.c | 8 +- arch/riscv/kernel/process.c | 4 +- arch/riscv/kernel/signal.c | 6 +- arch/riscv/kernel/sys_hwprobe.c | 5 + arch/riscv/kernel/vector.c | 25 +- arch/riscv/kernel/vendor_extensions.c | 10 + arch/riscv/kernel/vendor_extensions/Makefile | 2 + arch/riscv/kernel/vendor_extensions/thead.c | 18 ++ .../riscv/kernel/vendor_extensions/thead_hwprobe.c | 19 ++ tools/testing/selftests/riscv/vector/.gitignore | 3 +- tools/testing/selftests/riscv/vector/Makefile | 17 +- .../selftests/riscv/vector/v_exec_initval_nolibc.c | 93 +++++++ tools/testing/selftests/riscv/vector/v_helpers.c | 67 +++++ tools/testing/selftests/riscv/vector/v_helpers.h | 7 + tools/testing/selftests/riscv/vector/v_initval.c | 22 ++ .../selftests/riscv/vector/v_initval_nolibc.c | 68 ----- .../selftests/riscv/vector/vstate_exec_nolibc.c | 20 +- .../testing/selftests/riscv/vector/vstate_prctl.c | 295 ++++++++++++--------- 34 files changed, 911 insertions(+), 271 deletions(-) --- base-commit: 11cc01d4d2af304b7288251aad7e03315db8dffc change-id: 20240530-xtheadvector-833d3d17b423 -- - Charlie

1 year, 1 month

6
26
0 0

[RFC] ktap_v2: KTAP specification transition method

by Frank Rowand

In the middle of the thread about a patch to add the skip test result, I suggested documenting the process of deprecating the KTAP v1 Specification method of marking a skipped test: https://lore.kernel.org/all/490271eb-1429-2217-6e38-837c6e5e328b@gmail.com/… In a reply to that email I suggested that we ought to have a process to transition the KTAP Specification from v1 to v2, and possibly v3 and future. This email is meant to be the root of that discussion. My initial thinking is that there are at least three different types of project and/or community that may have different needs in this area. Type 1 - project controls both the test output generation and the test output parsing tool. Both generation and parsing code are in the same repository and/or synchronized versions are distributed together. Devicetree unittests are an example of Type 1. I plan to maintain changes of test output to KTAP v2 format in coordination with updating the parser to process KTAP v2 data. Type 2 - project controls both the test output generation and the test output parsing tool. The test output generation and a parser modifications may be controlled by the project BUT there are one or more external testing projects that (1) may have their own parsers, and (2) may have a single framework that tests multiple versions of the tests. I think that kselftest and kunit tests are probably examples of Type 2. I also think that DT unittests will become a Type 2 project as a result of converting to KTAP v2 data. Type 3 - project may create and maintain some tests, but is primarily a consumer of tests created by other projects. Type 3 projects typically have a single framework that is able to execute and process multiple versions of the tests. The Fuego test project is an example of Type 3. Maybe adding all of this complexity of different Types in my initial thinking was silly -- maybe everything in this topic is governed by the more complex Type 3. My thinking was that the three different Types of project would be impacted in different ways by transition plans. Type 3 would be the most impacted, so I wanted to be sure that any transition plan especially considered their needs. There is an important aspect of the KTAP format that might ease the transition from one version to another: All KTAP formatted results begin with a "version line", so as soon as a parser has processed the first line of a test, it can apply the appropriate KTAP Specification version to all subsequent lines of test output. A parser implementation could choose to process all versions, could choose to invoke a version specific parser, or some other approach all together. In the "add skip test results" thread, I suggested deprecating the v1 method of marking a skipped test in v2, with a scheduled removal of the v1 method in v3. But since the KTAP format version is available in the very first line of test output, is it necessary to do a slow deprecation and removal over two versions? One argument to doing a two version deprecation/removal process is that a parser that is one version older the the test output _might_ be able to process the test output without error, but would not be able to take advantage of features added in the newer version of the Specification. My opinion is that a two version deprecation/removal process will slow the Specification update process and lead to more versions of the Specification over a given time interval. A one version deprecation/removal process puts more of a burden on Type 3 projects and external parsers for Type 2 projects to implement parsers that can process the newer Specification more quickly and puts a burden on test maintainers to delay a move to the newer Specification, or possibly pressure to support selection of more than one Specification version format for output data. One additional item... On the KTAP Specification version 2 process wiki page, I suggested that it is "desirable for test result parsers that understand the KTAP Specification version 2 data also be able to parse version 1 data." With the implication "Converting version 1 compliant data to version 2 compliant data should not require a "flag day" switch of test result parsers." If this thread discussion results in a different decision, I will update the wiki. Thoughts? -Frank

1 year, 1 month

3
2
0 0

[PATCH v2 0/4] kselftests: vdso: conform tests to TAP output

by Muhammad Usama Anjum

Conform individual tests to TAP output. One patch conform one test. With this series, all vDSO tests become TAP conformant. First patch conform the test by using kselftest_harness.h. Other patches are conforming using default kselftest.h helpers. All tests have been tested multiple times before and after these patches. They are working correctly and outputting TAP messaging to find failures quikly when they happen. --- Changes since v1: - Update cover letter - Update commit message of first patch Muhammad Usama Anjum (4): kselftests: vdso: vdso_test_clock_getres: conform test to TAP output kselftests: vdso: vdso_test_correctness: conform test to TAP output kselftests: vdso: vdso_test_getcpu: conform test to TAP output kselftests: vdso: vdso_test_gettimeofday: conform test to TAP output .../selftests/vDSO/vdso_test_clock_getres.c | 68 ++++---- .../selftests/vDSO/vdso_test_correctness.c | 146 +++++++++--------- .../testing/selftests/vDSO/vdso_test_getcpu.c | 16 +- .../selftests/vDSO/vdso_test_gettimeofday.c | 23 +-- 4 files changed, 126 insertions(+), 127 deletions(-) -- 2.39.2

1 year, 1 month

2
10
0 0

[PATCH 0/6] defconfig: drop RT_GROUP_SCHED=y

by Celeste Liu

For cgroup v1, if turned on, and there's any cgroup in the "cpu" hierarchy it needs an RT budget assigned, otherwise the processes in it will not be able to get RT at all. The problem with RT group scheduling is that it requires the budget assigned but there's no way we could assign a default budget, since the values to assign are both upper and lower time limits, are absolute, and need to be sum up to < 1 for each individal cgroup. That means we cannot really come up with values that would work by default in the general case.[1] For cgroup v2, it's almost unusable as well. If it turned on, the cpu controller can only be enabled when all RT processes are in the root cgroup. But it will lose the benefits of cgroup v2 if all RT process were placed in the same cgroup. Red Hat, Gentoo, Arch Linux and Debian all disable it. systemd also doesn't support it.[2] I leave tools/testing/selftests/bpf/config.{s390x,aarch64} untouched because I don't whether bpf testing requires it. [1]: https://bugzilla.redhat.com/show_bug.cgi?id=1229700 [2]: https://github.com/systemd/systemd/issues/13781#issuecomment-549164383 Celeste Liu (6): riscv: defconfig: drop RT_GROUP_SCHED=y loongarch: defconfig: drop RT_GROUP_SCHED=y mips: defconfig: drop RT_GROUP_SCHED=y from generic/db1xxx/eyeq5 powerpc: defconfig: drop RT_GROUP_SCHED=y from ppc6xx_defconfig sh: defconfig: drop RT_GROUP_SCHED=y from sdk7786/urquell arm: defconfig: drop RT_GROUP_SCHED=y from bcm2855/tegra/omap2plus arch/arm/configs/bcm2835_defconfig | 1 - arch/arm/configs/omap2plus_defconfig | 1 - arch/arm/configs/tegra_defconfig | 1 - arch/loongarch/configs/loongson3_defconfig | 1 - arch/mips/configs/db1xxx_defconfig | 1 - arch/mips/configs/eyeq5_defconfig | 1 - arch/mips/configs/generic_defconfig | 1 - arch/powerpc/configs/ppc6xx_defconfig | 1 - arch/riscv/configs/defconfig | 1 - arch/sh/configs/sdk7786_defconfig | 1 - arch/sh/configs/urquell_defconfig | 1 - 11 files changed, 11 deletions(-) -- 2.45.1

1 year, 1 month

6
12
0 0

[PATCH v2] selftest: acct: Add selftest for the acct() syscall

by Abdulrasaq Lawani

Noticed that there was no selftest for the acct() syscall which enables the kernel to record terminated processes into a specified file. The acct() system call enables or disables process accounting. If accounting is turned on, records for each terminating process are appended to a specified filename as it terminates. An argument of NULL causes accounting to be turned off. This patch provides a test for the acct() syscall. References: https://man7.org/linux/man-pages/man2/acct.2.html Signed-off-by: Abdulrasaq Lawani <abdulrasaqolawani(a)gmail.com> --- Changes in v2: Add testcases to test error conditions. Add kselftest function for reporting results. - Link to v1: https://lore.kernel.org/r/20240622-kselftest-acct-syscall-v1-1-d270b5be8d37… --- tools/testing/selftests/Makefile | 1 + tools/testing/selftests/acct/.gitignore | 2 + tools/testing/selftests/acct/Makefile | 4 ++ tools/testing/selftests/acct/acct_syscall.c | 89 +++++++++++++++++++++++++++++ 4 files changed, 96 insertions(+) diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 9039f3709aff..45a58ef5ad92 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 +TARGETS += acct TARGETS += alsa TARGETS += amd-pstate TARGETS += arm64 diff --git a/tools/testing/selftests/acct/.gitignore b/tools/testing/selftests/acct/.gitignore new file mode 100644 index 000000000000..8ab358d81bd2 --- /dev/null +++ b/tools/testing/selftests/acct/.gitignore @@ -0,0 +1,2 @@ +acct_syscall +config \ No newline at end of file diff --git a/tools/testing/selftests/acct/Makefile b/tools/testing/selftests/acct/Makefile new file mode 100644 index 000000000000..ff3e238c5634 --- /dev/null +++ b/tools/testing/selftests/acct/Makefile @@ -0,0 +1,4 @@ +TEST_GEN_PROGS := acct_syscall +CFLAGS += -Wall + +include ../lib.mk \ No newline at end of file diff --git a/tools/testing/selftests/acct/acct_syscall.c b/tools/testing/selftests/acct/acct_syscall.c new file mode 100644 index 000000000000..4fa00a88a1bd --- /dev/null +++ b/tools/testing/selftests/acct/acct_syscall.c @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* kselftest for acct() system call + * The acct() system call enables or disables process accounting. + */ + +#include <stdio.h> +#include <errno.h> +#include <string.h> +#include <sys/wait.h> + +#include "../kselftest.h" + +int main(void) +{ + // Setting up kselftest framework + ksft_print_header(); + ksft_set_plan(1); + + // Create file to log closed processes + char filename[] = "process_log"; + FILE *fp; + + fp = fopen(filename, "w"); + + int i = acct(filename); + + // Handle error conditions + if (i) { + switch (errno) { + case EPERM: + ksft_test_result_error("%s. Please run the test as root.\n", + strerror(errno)); + break; + + case EACCES: + ksft_test_result_error("Insufficient privilege.\n"); + break; + + case EIO: + ksft_test_result_error("Error writing to the file: %s.\n", filename); + break; + + default: + ksft_test_result_error("%s.\n", strerror(errno)); + break; + } + + remove(filename); + fclose(fp); + ksft_finished(); + return 1; + } + + // Create child process and wait for it to terminate. + pid_t child_pid; + + child_pid = fork(); + + if (child_pid < 0) { + ksft_test_result_error("Process failed\n"); + ksft_finished(); + return 1; + } else if (child_pid == 0) { + ksft_print_msg("Child process successfully created!\n"); + } else { + wait(NULL); + fseek(fp, 0L, SEEK_END); + int sz = ftell(fp); + + ksft_print_msg("Parent process successfully created!\n"); + + i = acct(NULL); + + if (sz <= 0) { + ksft_test_result_fail("Terminated child process not logged"); + ksft_exit_fail(); + return 1; + } + + ksft_test_result_pass("Successfully logged terminated process.\n"); + remove(filename); + fclose(fp); + ksft_exit_pass(); + return 0; + } + + return 1; +} --- base-commit: 50736169ecc8387247fe6a00932852ce7b057083 change-id: 20240622-kselftest-acct-syscall-2d90f7666b1e Best regards, -- Abdulrasaq Lawani <abdulrasaqolawani(a)gmail.com>

1 year, 1 month

2
1
0 0

[PATCH 0/1] KVM: selftests: pmu_counters_test: increase robustness of LLC cache misses

by Maxim Levitsky

Recent CI failures brought my attention to the fact that pmu_counters_test sometimes fails because it doesn't get any LLC cache misses. It apparently happens because CLFLUSH can race with CPU prediction. To attempt to fix this, implement a more aggressive cache flushing - now it is flushed on each iteration of the measured loop which should at least reduce by order of magnitude the chance of this happening. This patch survived more that a day of running in a loop on a Comet Lake machine, where the test used to fail after about 10-20 minites. Best regards, Maxim Levitsky Maxim Levitsky (1): KVM: selftests: pmu_counters_test: increase robustness of LLC cache misses .../selftests/kvm/x86_64/pmu_counters_test.c | 20 +++++++++---------- 1 file changed, 9 insertions(+), 11 deletions(-) -- 2.26.3

1 year, 1 month

2
4
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror June 2024