May 2024 - Linux-kselftest-mirror

[PATCH net] testing: net-drv: use stats64 for testing

by Joe Damato

Testing a network device that has large numbers of bytes/packets may overflow. Using stats64 when comparing fixes this problem. I tripped on this while iterating on a qstats patch for mlx5. See below for confirmation without my added code that this is a bug. Before this patch (with added debugging output): $ NETIF=eth0 tools/testing/selftests/drivers/net/stats.py KTAP version 1 1..4 ok 1 stats.check_pause ok 2 stats.check_fec rstat: 481708634 qstat: 666201639514 key: tx-bytes not ok 3 stats.pkt_byte_sum ok 4 stats.qstat_by_ifindex Note the huge delta above ^^^ in the rtnl vs qstats. After this patch: $ NETIF=eth0 tools/testing/selftests/drivers/net/stats.py KTAP version 1 1..4 ok 1 stats.check_pause ok 2 stats.check_fec ok 3 stats.pkt_byte_sum ok 4 stats.qstat_by_ifindex It looks like rtnl_fill_stats in net/core/rtnetlink.c will attempt to copy the 64bit stats into a 32bit structure which is probably why this behavior is occurring. To show this is happening, you can get the underlying stats that the stats.py test uses like this: $ ./cli.py --spec ../../../Documentation/netlink/specs/rt_link.yaml \ --do getlink --json '{"ifi-index": 7}' And examine the output (heavily snipped to show relevant fields): 'stats': { 'multicast': 3739197, 'rx-bytes': 1201525399, 'rx-packets': 56807158, 'tx-bytes': 492404458, 'tx-packets': 1200285371, 'stats64': { 'multicast': 3739197, 'rx-bytes': 35561263767, 'rx-packets': 56807158, 'tx-bytes': 666212335338, 'tx-packets': 1200285371, The stats.py test prior to this patch was using the 'stats' structure above, which matches the failure output on my system. Comparing side by side, rx-bytes and tx-bytes, and getting ethtool -S output: rx-bytes stats: 1201525399 rx-bytes stats64: 35561263767 rx-bytes ethtool: 36203402638 tx-bytes stats: 492404458 tx-bytes stats64: 666212335338 tx-bytes ethtool: 666215360113 Note that the above was taken from a system with an mlx5 NIC, which only exposes ndo_get_stats64. Based on the ethtool output and qstat output, it appears that stats.py should be updated to use the 'stats64' structure for accurate comparisons when packet/byte counters get very large. To confirm that this was not related to the qstats code I was iterating on, I booted a kernel without my driver changes and re-ran the test which shows the qstats are skipped (as they don't exist for mlx5): NETIF=eth0 tools/testing/selftests/drivers/net/stats.py KTAP version 1 1..4 ok 1 stats.check_pause ok 2 stats.check_fec ok 3 stats.pkt_byte_sum # SKIP qstats not supported by the device ok 4 stats.qstat_by_ifindex # SKIP No ifindex supports qstats But, fetching the stats using the CLI $ ./cli.py --spec ../../../Documentation/netlink/specs/rt_link.yaml \ --do getlink --json '{"ifi-index": 7}' Shows the same issue (heavily snipped for relevant fields only): 'stats': { 'multicast': 105489, 'rx-bytes': 530879526, 'rx-packets': 751415, 'tx-bytes': 2510191396, 'tx-packets': 27700323, 'stats64': { 'multicast': 105489, 'rx-bytes': 530879526, 'rx-packets': 751415, 'tx-bytes': 15395093284, 'tx-packets': 27700323, Comparing side by side with ethtool -S on the unmodified mlx5 driver: tx-bytes stats: 2510191396 tx-bytes stats64: 15395093284 tx-bytes ethtool: 17718435810 Fixes: f0e6c86e4bab ("testing: net-drv: add a driver test for stats reporting") Signed-off-by: Joe Damato <jdamato(a)fastly.com> --- tools/testing/selftests/drivers/net/stats.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/drivers/net/stats.py b/tools/testing/selftests/drivers/net/stats.py index 7a7b16b180e2..820b8e0a22c6 100755 --- a/tools/testing/selftests/drivers/net/stats.py +++ b/tools/testing/selftests/drivers/net/stats.py @@ -69,7 +69,7 @@ def pkt_byte_sum(cfg) -> None: return 0 for _ in range(10): - rtstat = rtnl.getlink({"ifi-index": cfg.ifindex})['stats'] + rtstat = rtnl.getlink({"ifi-index": cfg.ifindex})['stats64'] if stat_cmp(rtstat, qstat) < 0: raise Exception("RTNL stats are lower, fetched later") qstat = get_qstat(cfg) -- 2.25.1

1 year, 4 months

2
1
0 0

[PATCH bpf-next] selftests/bpf: Use prog_attach_type to attach in test_sockmap

by Geliang Tang

From: Geliang Tang <tanggeliang(a)kylinos.cn> Since prog_attach_type[] array is defined, it makes sense to use it paired with prog_fd[] array for bpf_prog_attach() and bpf_prog_detach2() instead of open-coding. Signed-off-by: Geliang Tang <tanggeliang(a)kylinos.cn> --- tools/testing/selftests/bpf/test_sockmap.c | 44 +++++++++++----------- 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/tools/testing/selftests/bpf/test_sockmap.c b/tools/testing/selftests/bpf/test_sockmap.c index 4499b3cfc3a6..8c8208b82c5e 100644 --- a/tools/testing/selftests/bpf/test_sockmap.c +++ b/tools/testing/selftests/bpf/test_sockmap.c @@ -65,6 +65,18 @@ int map_fd[9]; struct bpf_map *maps[9]; int prog_fd[9]; +int prog_attach_type[] = { + BPF_SK_SKB_STREAM_PARSER, + BPF_SK_SKB_STREAM_VERDICT, + BPF_SK_SKB_STREAM_VERDICT, + BPF_CGROUP_SOCK_OPS, + BPF_SK_MSG_VERDICT, + BPF_SK_MSG_VERDICT, + BPF_SK_MSG_VERDICT, + BPF_SK_MSG_VERDICT, + BPF_SK_MSG_VERDICT, +}; + int txmsg_pass; int txmsg_redir; int txmsg_drop; @@ -961,7 +973,7 @@ static int run_options(struct sockmap_options *options, int cg_fd, int test) /* Attach programs to sockmap */ if (!txmsg_omit_skb_parser) { err = bpf_prog_attach(prog_fd[0], map_fd[0], - BPF_SK_SKB_STREAM_PARSER, 0); + prog_attach_type[0], 0); if (err) { fprintf(stderr, "ERROR: bpf_prog_attach (sockmap %i->%i): %d (%s)\n", @@ -971,7 +983,7 @@ static int run_options(struct sockmap_options *options, int cg_fd, int test) } err = bpf_prog_attach(prog_fd[1], map_fd[0], - BPF_SK_SKB_STREAM_VERDICT, 0); + prog_attach_type[1], 0); if (err) { fprintf(stderr, "ERROR: bpf_prog_attach (sockmap): %d (%s)\n", err, strerror(errno)); @@ -982,7 +994,7 @@ static int run_options(struct sockmap_options *options, int cg_fd, int test) if (txmsg_ktls_skb) { if (!txmsg_omit_skb_parser) { err = bpf_prog_attach(prog_fd[0], map_fd[8], - BPF_SK_SKB_STREAM_PARSER, 0); + prog_attach_type[0], 0); if (err) { fprintf(stderr, "ERROR: bpf_prog_attach (TLS sockmap %i->%i): %d (%s)\n", @@ -992,7 +1004,7 @@ static int run_options(struct sockmap_options *options, int cg_fd, int test) } err = bpf_prog_attach(prog_fd[2], map_fd[8], - BPF_SK_SKB_STREAM_VERDICT, 0); + prog_attach_type[2], 0); if (err) { fprintf(stderr, "ERROR: bpf_prog_attach (TLS sockmap): %d (%s)\n", err, strerror(errno)); @@ -1001,7 +1013,7 @@ static int run_options(struct sockmap_options *options, int cg_fd, int test) } /* Attach to cgroups */ - err = bpf_prog_attach(prog_fd[3], cg_fd, BPF_CGROUP_SOCK_OPS, 0); + err = bpf_prog_attach(prog_fd[3], cg_fd, prog_attach_type[3], 0); if (err) { fprintf(stderr, "ERROR: bpf_prog_attach (groups): %d (%s)\n", err, strerror(errno)); @@ -1279,11 +1291,11 @@ static int run_options(struct sockmap_options *options, int cg_fd, int test) fprintf(stderr, "unknown test\n"); out: /* Detatch and zero all the maps */ - bpf_prog_detach2(prog_fd[3], cg_fd, BPF_CGROUP_SOCK_OPS); - bpf_prog_detach2(prog_fd[0], map_fd[0], BPF_SK_SKB_STREAM_PARSER); - bpf_prog_detach2(prog_fd[1], map_fd[0], BPF_SK_SKB_STREAM_VERDICT); - bpf_prog_detach2(prog_fd[0], map_fd[8], BPF_SK_SKB_STREAM_PARSER); - bpf_prog_detach2(prog_fd[2], map_fd[8], BPF_SK_SKB_STREAM_VERDICT); + bpf_prog_detach2(prog_fd[3], cg_fd, prog_attach_type[3]); + bpf_prog_detach2(prog_fd[0], map_fd[0], prog_attach_type[0]); + bpf_prog_detach2(prog_fd[1], map_fd[0], prog_attach_type[1]); + bpf_prog_detach2(prog_fd[0], map_fd[8], prog_attach_type[0]); + bpf_prog_detach2(prog_fd[2], map_fd[8], prog_attach_type[2]); if (tx_prog_fd >= 0) bpf_prog_detach2(tx_prog_fd, map_fd[1], BPF_SK_MSG_VERDICT); @@ -1783,18 +1795,6 @@ char *map_names[] = { "tls_sock_map", }; -int prog_attach_type[] = { - BPF_SK_SKB_STREAM_PARSER, - BPF_SK_SKB_STREAM_VERDICT, - BPF_SK_SKB_STREAM_VERDICT, - BPF_CGROUP_SOCK_OPS, - BPF_SK_MSG_VERDICT, - BPF_SK_MSG_VERDICT, - BPF_SK_MSG_VERDICT, - BPF_SK_MSG_VERDICT, - BPF_SK_MSG_VERDICT, -}; - int prog_type[] = { BPF_PROG_TYPE_SK_SKB, BPF_PROG_TYPE_SK_SKB, -- 2.43.0

1 year, 4 months

1
1
0 0

[PATCH] riscv: selftests: Add hwprobe binaries to .gitignore

by Charlie Jenkins

The cbo and which-cpu hwprobe selftests leave their artifacts in the kernel tree and end up being tracked by git. Add the binaries to the hwprobe selftest .gitignore so this no longer happens. Signed-off-by: Charlie Jenkins <charlie(a)rivosinc.com> Fixes: a29e2a48afe3 ("RISC-V: selftests: Add CBO tests") Fixes: ef7d6abb2cf5 ("RISC-V: selftests: Add which-cpus hwprobe test") --- tools/testing/selftests/riscv/hwprobe/.gitignore | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/testing/selftests/riscv/hwprobe/.gitignore b/tools/testing/selftests/riscv/hwprobe/.gitignore index 8113dc3bdd03..6e384e80ea1a 100644 --- a/tools/testing/selftests/riscv/hwprobe/.gitignore +++ b/tools/testing/selftests/riscv/hwprobe/.gitignore @@ -1 +1,3 @@ hwprobe +cbo +which-cpus --- base-commit: ed30a4a51bb196781c8058073ea720133a65596f change-id: 20240425-gitignore_hwprobe_artifacts-fb0f2cd3509c -- - Charlie

1 year, 4 months

4
3
0 0

[PATCH] riscv: selftests: Add signal handling vector tests

by Charlie Jenkins

Add two tests to check vector save/restore when a signal is received during a vector routine. One test ensures that a value is not clobbered during signal handling. The other verifies that vector registers modified in the signal handler are properly reflected when the signal handling is complete. Signed-off-by: Charlie Jenkins <charlie(a)rivosinc.com> --- These tests came about to highlight the bug fixed in https://lore.kernel.org/lkml/20240403072638.567446-1-bjorn@kernel.org/ and will only pass with that fix applied. --- tools/testing/selftests/riscv/Makefile | 2 +- tools/testing/selftests/riscv/sigreturn/.gitignore | 1 + tools/testing/selftests/riscv/sigreturn/Makefile | 12 ++++ .../testing/selftests/riscv/sigreturn/sigreturn.c | 82 ++++++++++++++++++++++ 4 files changed, 96 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/riscv/Makefile b/tools/testing/selftests/riscv/Makefile index 4a9ff515a3a0..7ce03d832b64 100644 --- a/tools/testing/selftests/riscv/Makefile +++ b/tools/testing/selftests/riscv/Makefile @@ -5,7 +5,7 @@ ARCH ?= $(shell uname -m 2>/dev/null || echo not) ifneq (,$(filter $(ARCH),riscv)) -RISCV_SUBTARGETS ?= hwprobe vector mm +RISCV_SUBTARGETS ?= hwprobe vector mm sigreturn else RISCV_SUBTARGETS := endif diff --git a/tools/testing/selftests/riscv/sigreturn/.gitignore b/tools/testing/selftests/riscv/sigreturn/.gitignore new file mode 100644 index 000000000000..35002b8ae780 --- /dev/null +++ b/tools/testing/selftests/riscv/sigreturn/.gitignore @@ -0,0 +1 @@ +sigreturn diff --git a/tools/testing/selftests/riscv/sigreturn/Makefile b/tools/testing/selftests/riscv/sigreturn/Makefile new file mode 100644 index 000000000000..eb8bac9279a8 --- /dev/null +++ b/tools/testing/selftests/riscv/sigreturn/Makefile @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 ARM Limited +# Originally tools/testing/arm64/abi/Makefile + +CFLAGS += -I$(top_srcdir)/tools/include + +TEST_GEN_PROGS := sigreturn + +include ../../lib.mk + +$(OUTPUT)/sigreturn: sigreturn.c + $(CC) -static -o$@ $(CFLAGS) $(LDFLAGS) $^ diff --git a/tools/testing/selftests/riscv/sigreturn/sigreturn.c b/tools/testing/selftests/riscv/sigreturn/sigreturn.c new file mode 100644 index 000000000000..62397d5934f1 --- /dev/null +++ b/tools/testing/selftests/riscv/sigreturn/sigreturn.c @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include <signal.h> +#include <stdio.h> +#include <stdlib.h> +#include <ucontext.h> +#include <linux/ptrace.h> +#include "../../kselftest_harness.h" + +#define RISCV_V_MAGIC 0x53465457 +#define DEFAULT_VALUE 2 +#define SIGNAL_HANDLER_OVERRIDE 3 + +static void simple_handle(int sig_no, siginfo_t *info, void *vcontext) +{ + ucontext_t *context = vcontext; + + context->uc_mcontext.__gregs[REG_PC] = context->uc_mcontext.__gregs[REG_PC] + 4; +} + +static void vector_override(int sig_no, siginfo_t *info, void *vcontext) +{ + ucontext_t *context = vcontext; + + // vector state + struct __riscv_extra_ext_header *ext; + struct __riscv_v_ext_state *v_ext_state; + + /* Find the vector context. */ + ext = (void *)(&context->uc_mcontext.__fpregs); + if (ext->hdr.magic != RISCV_V_MAGIC) { + fprintf(stderr, "bad vector magic: %x\n", ext->hdr.magic); + abort(); + } + + v_ext_state = (void *)((char *)(ext) + sizeof(*ext)); + + *(int *)v_ext_state->datap = SIGNAL_HANDLER_OVERRIDE; + + context->uc_mcontext.__gregs[REG_PC] = context->uc_mcontext.__gregs[REG_PC] + 4; +} + +static int vector_sigreturn(int data, void (*handler)(int, siginfo_t *, void *)) +{ + int after_sigreturn; + struct sigaction sig_action = { + .sa_sigaction = handler, + .sa_flags = SA_SIGINFO + }; + + sigaction(SIGSEGV, &sig_action, 0); + + asm(".option push \n\ + .option arch, +v \n\ + vsetivli x0, 1, e32, ta, ma \n\ + vmv.s.x v0, %1 \n\ + # Generate SIGSEGV \n\ + lw a0, 0(x0) \n\ + vmv.x.s %0, v0 \n\ + .option pop" : "=r" (after_sigreturn) : "r" (data)); + + return after_sigreturn; +} + +TEST(vector_restore) +{ + int result; + + result = vector_sigreturn(DEFAULT_VALUE, &simple_handle); + + EXPECT_EQ(DEFAULT_VALUE, result); +} + +TEST(vector_restore_signal_handler_override) +{ + int result; + + result = vector_sigreturn(DEFAULT_VALUE, &vector_override); + + EXPECT_EQ(SIGNAL_HANDLER_OVERRIDE, result); +} + +TEST_HARNESS_MAIN --- base-commit: 4cece764965020c22cff7665b18a012006359095 change-id: 20240403-vector_sigreturn_tests-8118f0ac54fa -- - Charlie

1 year, 4 months

6
6
0 0

[PATCH net] selftests: hsr: Fix "File exists" errors for hsr_ping

by Geliang Tang

From: Geliang Tang <tanggeliang(a)kylinos.cn> The hsr_ping test reports the following errors: INFO: preparing interfaces for HSRv0. INFO: Initial validation ping. INFO: Longer ping test. INFO: Cutting one link. INFO: Delay the link and drop a few packages. INFO: All good. INFO: preparing interfaces for HSRv1. RTNETLINK answers: File exists RTNETLINK answers: File exists RTNETLINK answers: File exists RTNETLINK answers: File exists RTNETLINK answers: File exists RTNETLINK answers: File exists Error: ipv4: Address already assigned. Error: ipv6: address already assigned. Error: ipv4: Address already assigned. Error: ipv6: address already assigned. Error: ipv4: Address already assigned. Error: ipv6: address already assigned. INFO: Initial validation ping. That is because the cleanup code for the 2nd round test before "setup_hsr_interfaces 1" is removed incorrectly in commit 680fda4f6714 ("test: hsr: Remove script code already implemented in lib.sh"). This patch fixes it by adding a new helper delete_hsr_interfaces() to delete all interfaces before "setup_hsr_interfaces 1". Fixes: 680fda4f6714 ("test: hsr: Remove script code already implemented in lib.sh") Signed-off-by: Geliang Tang <tanggeliang(a)kylinos.cn> --- tools/testing/selftests/net/hsr/hsr_ping.sh | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/tools/testing/selftests/net/hsr/hsr_ping.sh b/tools/testing/selftests/net/hsr/hsr_ping.sh index 790294c8af83..0be1d5f78dab 100755 --- a/tools/testing/selftests/net/hsr/hsr_ping.sh +++ b/tools/testing/selftests/net/hsr/hsr_ping.sh @@ -166,6 +166,14 @@ setup_hsr_interfaces() ip -net "$ns3" link set hsr3 up } +delete_hsr_interfaces() +{ + echo "INFO: delete interfaces." + ip -net "$ns1" link del ns1eth1 + ip -net "$ns1" link del ns1eth2 + ip -net "$ns3" link del ns3eth2 +} + check_prerequisites setup_ns ns1 ns2 ns3 @@ -174,6 +182,8 @@ trap cleanup_all_ns EXIT setup_hsr_interfaces 0 do_complete_ping_test +delete_hsr_interfaces + setup_hsr_interfaces 1 do_complete_ping_test -- 2.43.0

1 year, 4 months

2
2
0 0

First Contributions for KUnit

by Artur A C de Barros

Hi all, We are students from the State University of Campinas with an interest in contributing to the kernel. We are part of LKCAMP, a student group that focuses on researching and contributing to open source software. Our group has organized kernel hackathons in the past [1] that resulted in sucessful contributions, and we would like to continue the effort this year. This time, we were thinking about writing KUnit tests for data structures in `lib/` (or converting existing lib test code), similarly to our previous hackathon. We are currently considering a few candidates: - lib/kfifo.c - lib/llist.c - tools/testing/scatterlist - tools/testing/radix-tree We would like to know if these are good candidates, and also ask for suggestions of other code that could benefit from having KUnit tests. Thanks! Artur Alves [1] https://lore.kernel.org/dri-devel/20211011152333.gm5jkaog6b6nbv5w@notapiano/

1 year, 4 months

2
1
0 0

[PATCH bpf-next] selftests/bpf: Fix prog numbers in test_sockmap

by Geliang Tang

From: Geliang Tang <tanggeliang(a)kylinos.cn> bpf_prog5 and bpf_prog7 are removed from progs/test_sockmap_kern.h in commit d79a32129b21 ("bpf: Selftests, remove prints from sockmap tests"), now there are only 9 progs in it, not 11: SEC("sk_skb1") int bpf_prog1(struct __sk_buff *skb) SEC("sk_skb2") int bpf_prog2(struct __sk_buff *skb) SEC("sk_skb3") int bpf_prog3(struct __sk_buff *skb) SEC("sockops") int bpf_sockmap(struct bpf_sock_ops *skops) SEC("sk_msg1") int bpf_prog4(struct sk_msg_md *msg) SEC("sk_msg2") int bpf_prog6(struct sk_msg_md *msg) SEC("sk_msg3") int bpf_prog8(struct sk_msg_md *msg) SEC("sk_msg4") int bpf_prog9(struct sk_msg_md *msg) SEC("sk_msg5") int bpf_prog10(struct sk_msg_md *msg) This patch updates the array sizes of prog_fd[], prog_attach_type[] and prog_type[] from 11 to 9 accordingly. Fixes: d79a32129b21 ("bpf: Selftests, remove prints from sockmap tests") Signed-off-by: Geliang Tang <tanggeliang(a)kylinos.cn> --- tools/testing/selftests/bpf/test_sockmap.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/tools/testing/selftests/bpf/test_sockmap.c b/tools/testing/selftests/bpf/test_sockmap.c index 92752f5eeded..4499b3cfc3a6 100644 --- a/tools/testing/selftests/bpf/test_sockmap.c +++ b/tools/testing/selftests/bpf/test_sockmap.c @@ -63,7 +63,7 @@ int passed; int failed; int map_fd[9]; struct bpf_map *maps[9]; -int prog_fd[11]; +int prog_fd[9]; int txmsg_pass; int txmsg_redir; @@ -1793,8 +1793,6 @@ int prog_attach_type[] = { BPF_SK_MSG_VERDICT, BPF_SK_MSG_VERDICT, BPF_SK_MSG_VERDICT, - BPF_SK_MSG_VERDICT, - BPF_SK_MSG_VERDICT, }; int prog_type[] = { @@ -1807,8 +1805,6 @@ int prog_type[] = { BPF_PROG_TYPE_SK_MSG, BPF_PROG_TYPE_SK_MSG, BPF_PROG_TYPE_SK_MSG, - BPF_PROG_TYPE_SK_MSG, - BPF_PROG_TYPE_SK_MSG, }; static int populate_progs(char *bpf_file) -- 2.43.0

1 year, 4 months

3
2
0 0

[PATCH 0/2] Restructure va_high_addr_switch

by Dev Jain

The va_high_addr_switch memory selftest tests out some corner cases related to allocation and page/hugepage faulting around the switch boundary. Currently, the page size and hugepage size have been statically defined. Post FEAT_LPA2, the Aarch64 Linux kernel adds support for 4k and 16k translation granules on higher addresses; we restructure the test to support the same. In addition, we avoid invocation of the binary twice, in the shell script, to reduce test noise. Dev Jain (2): selftests/mm: va_high_addr_switch: Reduce test noise selftests/mm: va_high_addr_switch: Dynamically initialize testcases to enable LPA2 testing .../selftests/mm/va_high_addr_switch.c | 454 +++++++++--------- .../selftests/mm/va_high_addr_switch.sh | 4 - 2 files changed, 232 insertions(+), 226 deletions(-) -- 2.34.1

1 year, 4 months

1
2
0 0

[PATCH 1/2] KVM: selftests: Fix nx_huge_pages_test for default_hugepagesz=1G

by Dongsheng Zhang

From: donsheng <dongsheng.x.zhang(a)intel.com> If the host was booted with the "default_hugepagesz=1G" kernel command-line parameter, running the NX hugepage test will fail with error "Invalid argument" at the TEST_ASSERT line in kvm_util.c's __vm_mem_region_delete() function: static void __vm_mem_region_delete(struct kvm_vm *vm, struct userspace_mem_region *region, bool unlink) { int ret; ... ret = munmap(region->mmap_start, region->mmap_size); TEST_ASSERT(!ret, __KVM_SYSCALL_ERROR("munmap()", ret)); ... } NX hugepage test creates a VM with a data slot of 6M size backed with huge pages. If the default hugetlb page size is set to 1G, calling mmap() with MAP_HUGETLB and a length of 6M will succeed but calling its matching munmap() will fail. Documentation/admin-guide/mm/hugetlbpage.rst specifies this behavior: "Syscalls that operate on memory backed by hugetlb pages only have their lengths aligned to the native page size of the processor; they will normally fail with errno set to EINVAL or exclude hugetlb pages that extend beyond the length if not hugepage aligned. For example, munmap(2) will fail if memory is backed by a hugetlb page and the length is smaller than the hugepage size." Explicitly use MAP_HUGE_2MB in conjunction with MAP_HUGETLB to fix the issue. Signed-off-by: donsheng <dongsheng.x.zhang(a)intel.com> Suggested-by: Zide Chen <zide.chen(a)intel.com> --- tools/testing/selftests/kvm/x86_64/nx_huge_pages_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/x86_64/nx_huge_pages_test.c b/tools/testing/selftests/kvm/x86_64/nx_huge_pages_test.c index 17bbb96fc4df..146e9033e206 100644 --- a/tools/testing/selftests/kvm/x86_64/nx_huge_pages_test.c +++ b/tools/testing/selftests/kvm/x86_64/nx_huge_pages_test.c @@ -129,7 +129,7 @@ void run_test(int reclaim_period_ms, bool disable_nx_huge_pages, vcpu = vm_vcpu_add(vm, 0, guest_code); - vm_userspace_mem_region_add(vm, VM_MEM_SRC_ANONYMOUS_HUGETLB, + vm_userspace_mem_region_add(vm, VM_MEM_SRC_ANONYMOUS_HUGETLB_2MB, HPAGE_GPA, HPAGE_SLOT, HPAGE_SLOT_NPAGES, 0); -- 2.43.0

1 year, 4 months

2
2
0 0

[PATCH bpf-next v2 0/4] use network helpers, part 5

by Geliang Tang

From: Geliang Tang <tanggeliang(a)kylinos.cn> This patchset uses post_socket_cb and post_connect_cb callbacks of struct network_helper_opts to refactor do_test() in bpf_tcp_ca.c to move dctcp test dedicated code out of do_test() into test_dctcp(). Patch 3 adds a new member in post_socket_opts and patch 4 adds a new callback in network_helper_opts. I'm not sure if this is going too far. v2: - rebased on commit "selftests/bpf: Add test for the use of new args in cong_control" Geliang Tang (4): selftests/bpf: Use post_socket_cb in connect_to_fd_opts selftests/bpf: Use start_server_addr in bpf_tcp_ca selftests/bpf: Use connect_to_fd_opts in do_test in bpf_tcp_ca selftests/bpf: Add post_connect_cb callback tools/testing/selftests/bpf/network_helpers.c | 13 +- tools/testing/selftests/bpf/network_helpers.h | 8 +- .../selftests/bpf/prog_tests/bpf_tcp_ca.c | 111 ++++++++++++------ 3 files changed, 86 insertions(+), 46 deletions(-) -- 2.43.0

1 year, 4 months

2
6
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror May 2024