December 2024 - Linux-kselftest-mirror

Re: [PATCH v2 1/6] kvm: s390: Reject setting flic pfault attributes on ucontrol VMs

by Hariharan Mari

On 2024-12-16 10:21, Christoph Schlameuss wrote: > Prevent null pointer dereference when processing the > KVM_DEV_FLIC_APF_ENABLE and KVM_DEV_FLIC_APF_DISABLE_WAIT ioctls in the > interrupt controller. > > Fixes: 3c038e6be0e2 ("KVM: async_pf: Async page fault support on s390") > Reported-by: Claudio Imbrenda <imbrenda(a)linux.ibm.com> > Signed-off-by: Christoph Schlameuss <schlameuss(a)linux.ibm.com> Tested-by: Hariharan Mari <hari55(a)linux.ibm.com> > --- > Documentation/virt/kvm/devices/s390_flic.rst | 4 ++++ > arch/s390/kvm/interrupt.c | 4 ++++ > 2 files changed, 8 insertions(+) > > diff --git a/Documentation/virt/kvm/devices/s390_flic.rst > b/Documentation/virt/kvm/devices/s390_flic.rst > index ea96559ba501..b784f8016748 100644 > --- a/Documentation/virt/kvm/devices/s390_flic.rst > +++ b/Documentation/virt/kvm/devices/s390_flic.rst > @@ -58,11 +58,15 @@ Groups: > Enables async page faults for the guest. So in case of a major > page fault > the host is allowed to handle this async and continues the guest. > > + -EINVAL is returned when called on the FLIC of a ucontrol VM. > + > KVM_DEV_FLIC_APF_DISABLE_WAIT > Disables async page faults for the guest and waits until already > pending > async page faults are done. This is necessary to trigger a > completion interrupt > for every init interrupt before migrating the interrupt list. > > + -EINVAL is returned when called on the FLIC of a ucontrol VM. > + > KVM_DEV_FLIC_ADAPTER_REGISTER > Register an I/O adapter interrupt source. Takes a > kvm_s390_io_adapter > describing the adapter to register:: > diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c > index ea8dce299954..22d73c13e555 100644 > --- a/arch/s390/kvm/interrupt.c > +++ b/arch/s390/kvm/interrupt.c > @@ -2678,9 +2678,13 @@ static int flic_set_attr(struct kvm_device > *dev, struct kvm_device_attr *attr) > kvm_s390_clear_float_irqs(dev->kvm); > break; > case KVM_DEV_FLIC_APF_ENABLE: > + if (kvm_is_ucontrol(dev->kvm)) > + return -EINVAL; > dev->kvm->arch.gmap->pfault_enabled = 1; > break; > case KVM_DEV_FLIC_APF_DISABLE_WAIT: > + if (kvm_is_ucontrol(dev->kvm)) > + return -EINVAL; > dev->kvm->arch.gmap->pfault_enabled = 0; > /* > * Make sure no async faults are in transition when

8 months, 1 week

1
0
0 0

[PATCH net-next v7 0/4] Add support for SO_PRIORITY cmsg

by Anna Emese Nyiri

Introduce a new helper function, `sk_set_prio_allowed`, to centralize the logic for validating priority settings. Add support for the `SO_PRIORITY` control message, enabling user-space applications to set socket priority via control messages (cmsg). Patch Overview: Patch 1/4: Introduce 'sk_set_prio_allowed' helper function. Patch 2/4: Add support for setting SO_PRIORITY via control messages Patch 3/4: Add test for SO_PRIORITY setting via control messages Patch 4/4: Add new socket option, SO_RCVPRIORITY v7: - Carry Eric's and Willem's "Reviewed-by" tags from v3 to patch 1/4 since that is resubmitted without changes. - Carry Willem's "Reviewed-by" tag from v4 in patch 2/4, as it is resubmitted without changes. - Carry Willem's "Reviewed-by" tag from v5 in patch 4/4, as it is resubmitted without changes. - Carry Willem's "Reviewed-by" tag from v6 since it is resubmitted with minor cosmetic changes in patch 3/4. - Carry Willem's "Acked-by" tag from v5 on FILTER_COUNTER (patch 3/4). - Carry Ido's "Reviewed-by" and "Tested-by" tags from v6 since it is resubmitted with minor cosmetic changes in patch 3/4. - Align the code to the open parenthesis in cmsg_sender.c (patch 3/4). - Remove unnecessary blank line in cmsg_so_priority.sh (patch 3/4). - Remove unused delay variable from cmsg_so_priority.sh (patch 3/4). - Rebased on net-next. v6: https://lore.kernel.org/netdev/20241210191309.8681-1-annaemesenyiri@gmail.c… - Carry Eric's and Willem's "Reviewed-by" tags from v3 to patch 1/4 since that is resubmitted without changes. - Carry Willem's "Reviewed-by" tag from v4 in patch 2/4, as it is resubmitted without changes. - Carry Willem's "Reviewed-by" tag from v5 in patch 4/4, as it is resubmitted without changes. - Use KSFT_SKIP in jq installation test and add 'nodad' flag for IPv6 address in cmsg_so_priority.sh (patch 3/4). - Rebased on net-next. v5: https://lore.kernel.org/netdev/20241205133112.17903-1-annaemesenyiri@gmail.… - Carry Eric's and Willem's "Reviewed-by" tags from v3 to patch 1/4 since that is resubmitted without changes. - Carry Willem's "Reviewed-by" tag from v4 in patch 2/4, as it is resubmitted without changes. - Eliminate variable duplication, fix indentation, simplify cleanup, verify dependencies, separate setsockopt and control message priority testing, and modify namespace setup in patch 3/4 cmsg_so_priority.sh. - Add cmsg_so_priority.sh to tools/testing/selftests/net/Makefile. - Remove the unused variable, rename priority_cmsg to priority, and document the -P option in cmsg_sender.c in patch 3/4. - New in v5: add new socket option, SO_RCVPRIORITY in patch 4/4. - Rebased on net-next. v4: https://lore.kernel.org/netdev/20241118145147.56236-1-annaemesenyiri@gmail.… - Carry Eric's and Willem's "Reviewed-by" tags from v3 to patch 1/3 since that is resubmitted without changes. - Updated description in patch 2/3. - Missing ipc6.sockc.priority field added in ping_v6_sendmsg() in patch 2/3. - Update cmsg_so_priority.sh to test SO_PRIORITY sockopt and cmsg setting with VLAN priority tagging in patch 3/3. (Ido Schimmel) - Rebased on net-next. v3: https://lore.kernel.org/netdev/20241107132231.9271-1-annaemesenyiri@gmail.c… - Updated cover letter text. - Removed priority field from ipcm_cookie. - Removed cork->tos value check from ip_setup_cork, so cork->priority will now take its value from ipc->sockc.priority. - Replaced ipc->priority with ipc->sockc.priority in ip_cmsg_send(). - Modified the error handling for the SO_PRIORITY case in __sock_cmsg_send(). - Added missing initialization for ipc6.sockc.priority. - Introduced cmsg_so_priority.sh test script. - Modified cmsg_sender.c to set priority via control message (cmsg). - Rebased on net-next. v2: https://lore.kernel.org/netdev/20241102125136.5030-1-annaemesenyiri@gmail.c… - Introduced sk_set_prio_allowed helper to check capability for setting priority. - Removed new fields and changed sockcm_cookie::priority from char to u32 to align with sk_buff::priority. - Moved the cork->tos value check for priority setting from __ip_make_skb() to ip_setup_cork(). - Rebased on net-next. v1: https://lore.kernel.org/all/20241029144142.31382-1-annaemesenyiri@gmail.com/ Anna Emese Nyiri (4): Introduce sk_set_prio_allowed helper function support SO_PRIORITY cmsg test SO_PRIORITY ancillary data with cmsg_sender introduce SO_RCVPRIORITY socket option arch/alpha/include/uapi/asm/socket.h | 2 + arch/mips/include/uapi/asm/socket.h | 2 + arch/parisc/include/uapi/asm/socket.h | 2 + arch/sparc/include/uapi/asm/socket.h | 2 + include/net/inet_sock.h | 2 +- include/net/ip.h | 2 +- include/net/sock.h | 8 +- include/uapi/asm-generic/socket.h | 2 + net/can/raw.c | 2 +- net/core/sock.c | 26 ++- net/ipv4/ip_output.c | 4 +- net/ipv4/ip_sockglue.c | 2 +- net/ipv4/raw.c | 2 +- net/ipv6/ip6_output.c | 3 +- net/ipv6/ping.c | 1 + net/ipv6/raw.c | 3 +- net/ipv6/udp.c | 1 + net/packet/af_packet.c | 2 +- net/socket.c | 11 ++ tools/include/uapi/asm-generic/socket.h | 2 + tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/cmsg_sender.c | 11 +- .../testing/selftests/net/cmsg_so_priority.sh | 151 ++++++++++++++++++ 23 files changed, 228 insertions(+), 16 deletions(-) create mode 100755 tools/testing/selftests/net/cmsg_so_priority.sh -- 2.43.0

8 months, 1 week

4
7
0 0

[PATCH bpf-next v1] selftests/bpf: avoid generating untracked files when running bpf selftests

by Jiayuan Chen

Currently, when we run the BPF selftests with the following command: 'make -C tools/testing/selftests TARGETS=bpf SKIP_TARGETS=""' The command generates untracked files and directories: ''' Untracked files: (use "git add <file>..." to include in what will be committed) tools/testing/selftests/bpfFEATURE-DUMP.selftests tools/testing/selftests/bpffeature/ ''' The core reason is our Makefile(tools/testing/selftests/bpf/Makefile) was written like this: ''' OUTPUT := $(OUTPUT)/ $(eval include ../../../build/Makefile.feature) OUTPUT := $(patsubst %/,%,$(OUTPUT)) ''' This way of assigning values to OUTPUT will never be effective for the variable OUTPUT provided via the command argument and sub makefile called like this(tools/testing/selftests/Makefile): ''' all: ... $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET ''' As stated in the GNU make documentation: ''' An argument that contains '=' specifies the value of a variable: 'v=x' sets the value of the variable v to x. If you specify a value in this way, all ordinary assignments of the same variable in the makefile are ignored; we say they have been overridden by the command line argument. ''' According to GNU make, we use override Directive to fix this issue: ''' If you want to set the variable in the makefile even though it was set with a command argument, you can use an override directive, which is a line that looks like this: override variable := value Link: https://www.gnu.org/software/make/manual/make.html#Override-Directive Fixes: dc3a8804d790 ("selftests/bpf: Adapt OUTPUT appending logic to lower versions of Make") Signed-off-by: Jiayuan Chen <mrpre(a)163.com> --- tools/testing/selftests/bpf/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 9e870e519c30..eb4d21651aa7 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -202,9 +202,9 @@ ifeq ($(shell expr $(MAKE_VERSION) \>= 4.4), 1) $(let OUTPUT,$(OUTPUT)/,\ $(eval include ../../../build/Makefile.feature)) else -OUTPUT := $(OUTPUT)/ +override OUTPUT := $(OUTPUT)/ $(eval include ../../../build/Makefile.feature) -OUTPUT := $(patsubst %/,%,$(OUTPUT)) +override OUTPUT := $(patsubst %/,%,$(OUTPUT)) endif endif base-commit: a7c205120d339b6ad2557fe3f33fdf20394f1a0f -- 2.43.5

8 months, 1 week

1
0
0 0

[PATCH] KVM: arm64: Fix set_id_regs selftest for ASIDBITS becoming unwritable

by Mark Brown

In commit 03c7527e97f7 ("KVM: arm64: Do not allow ID_AA64MMFR0_EL1.ASIDbits to be overridden") we made that bitfield in the ID registers unwritable however the change neglected to make the corresponding update to set_id_regs resulting in it failing: # ok 56 ID_AA64MMFR0_EL1_BIGEND # ==== Test Assertion Failure ==== # aarch64/set_id_regs.c:434: masks[idx] & ftr_bits[j].mask == ftr_bits[j].mask # pid=5566 tid=5566 errno=22 - Invalid argument # 1 0x00000000004034a7: test_vm_ftr_id_regs at set_id_regs.c:434 # 2 0x0000000000401b53: main at set_id_regs.c:684 # 3 0x0000ffff8e6b7543: ?? ??:0 # 4 0x0000ffff8e6b7617: ?? ??:0 # 5 0x0000000000401e6f: _start at ??:? # 0 != 0xf0 (masks[idx] & ftr_bits[j].mask != ftr_bits[j].mask) not ok 8 selftests: kvm: set_id_regs # exit=254 Remove ID_AA64MMFR1_EL1.ASIDBITS from the set of bitfields we test for writeability. Fixes: 03c7527e97f7 ("KVM: arm64: Do not allow ID_AA64MMFR0_EL1.ASIDbits to be overridden") Signed-off-by: Mark Brown <broonie(a)kernel.org> --- tools/testing/selftests/kvm/aarch64/set_id_regs.c | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/testing/selftests/kvm/aarch64/set_id_regs.c b/tools/testing/selftests/kvm/aarch64/set_id_regs.c index a79b7f18452d2ec336ae623b8aa5c9cf329b6b4e..3a97c160b5fec990aaf8dfaf100a907b913f057c 100644 --- a/tools/testing/selftests/kvm/aarch64/set_id_regs.c +++ b/tools/testing/selftests/kvm/aarch64/set_id_regs.c @@ -152,7 +152,6 @@ static const struct reg_ftr_bits ftr_id_aa64mmfr0_el1[] = { REG_FTR_BITS(FTR_LOWER_SAFE, ID_AA64MMFR0_EL1, BIGENDEL0, 0), REG_FTR_BITS(FTR_LOWER_SAFE, ID_AA64MMFR0_EL1, SNSMEM, 0), REG_FTR_BITS(FTR_LOWER_SAFE, ID_AA64MMFR0_EL1, BIGEND, 0), - REG_FTR_BITS(FTR_LOWER_SAFE, ID_AA64MMFR0_EL1, ASIDBITS, 0), REG_FTR_BITS(FTR_LOWER_SAFE, ID_AA64MMFR0_EL1, PARANGE, 0), REG_FTR_END, }; --- base-commit: 78d4f34e2115b517bcbfe7ec0d018bbbb6f9b0b8 change-id: 20241216-kvm-arm64-fix-set-id-asidbits-9bede25b7ad3 Best regards, -- Mark Brown <broonie(a)kernel.org>

8 months, 1 week

3
8
0 0

[PATCH bpf-next v3 0/2] bpf, verifier: Improve precision of BPF_MUL

by Matan Shachnai

Hi All, This patch-set aims to improve precision of BPF_MUL and add testcases to illustrate precision gains using signed and unsigned bounds. Thanks for taking the time to review and specifically for Eduard's feedback! Best, Matan Changes from v1: - Fixed typo made in patch Changes from v2: - Added signed multiplication to BPF_MUL - Added test cases to exercise BPF_MUL - Reordered patches in the series. Matan Shachnai (2): bpf, verifier: Improve precision of BPF_MUL selftests/bpf: Add testcases for BPF_MUL kernel/bpf/verifier.c | 72 +++++----- .../selftests/bpf/progs/verifier_bounds.c | 134 ++++++++++++++++++ 2 files changed, 166 insertions(+), 40 deletions(-) -- 2.25.1

8 months, 1 week

2
4
0 0

[PATCH v2] selftests: acct: Add ksft_exit_skip if not running as root

by Shivam Chaudhary

If the selftest is not running as root, it should skip not fail and give an appropriate warning to the user. This patch adds ksft_exit_skip() if the test is not running as root. Logs: Before change: TAP version 13 1..1 ok 1 # SKIP This test needs root to run! After change: TAP version 13 1..1 ok 2 # SKIP This test needs root to run! Totals: pass:0 fail:0 xfail:0 xpass:0 skip:1 error:0 Signed-off-by: Shivam Chaudhary <cvam0000(a)gmail.com> --- v1->v2 : Replace ksft_exit_fail_msg -> ksft_exit_skip v1 : https://lore.kernel.org/all/20241115191721.621381-1-cvam0000@gmail.com/ tools/testing/selftests/acct/acct_syscall.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/acct/acct_syscall.c b/tools/testing/selftests/acct/acct_syscall.c index e44e8fe1f4a3..87c044fb9293 100644 --- a/tools/testing/selftests/acct/acct_syscall.c +++ b/tools/testing/selftests/acct/acct_syscall.c @@ -24,7 +24,7 @@ int main(void) // Check if test is run a root if (geteuid()) { - ksft_test_result_skip("This test needs root to run!\n"); + ksft_exit_skip("This test needs root to run!\n"); return 1; } -- 2.34.1

8 months, 1 week

2
1
0 0

[PATCH] selftests: kselftest: Fix the wrong format specifier

by zhangjiao2

From: zhang jiao <zhangjiao2(a)cmss.chinamobile.com> The format specifier of "unsigned int" in printf() should be "%u", not "%d". Signed-off-by: zhang jiao <zhangjiao2(a)cmss.chinamobile.com> --- tools/testing/selftests/kselftest.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kselftest.h b/tools/testing/selftests/kselftest.h index 29fedf609611..062c02a7be2d 100644 --- a/tools/testing/selftests/kselftest.h +++ b/tools/testing/selftests/kselftest.h @@ -403,7 +403,7 @@ static inline __noreturn __printf(1, 2) void ksft_exit_skip(const char *msg, ... */ if (ksft_plan || ksft_test_num()) { ksft_cnt.ksft_xskip++; - printf("ok %d # SKIP ", 1 + ksft_test_num()); + printf("ok %u # SKIP ", 1 + ksft_test_num()); } else { printf("1..0 # SKIP "); } -- 2.33.0

8 months, 1 week

2
1
0 0

[PATCH net 5/5] selftests: net-drv: stats: sanity check netlink dumps

by Jakub Kicinski

Sanity check netlink dumps, to make sure dumps don't have repeated entries or gaps in IDs. Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: shuah(a)kernel.org CC: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/drivers/net/stats.py | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/drivers/net/stats.py b/tools/testing/selftests/drivers/net/stats.py index 63e3c045a3b2..031ac9def6c0 100755 --- a/tools/testing/selftests/drivers/net/stats.py +++ b/tools/testing/selftests/drivers/net/stats.py @@ -110,6 +110,23 @@ rtnl = RtnlFamily() ksft_ge(triple[1][key], triple[0][key], comment="bad key: " + key) ksft_ge(triple[2][key], triple[1][key], comment="bad key: " + key) + # Sanity check the dumps + queues = NetdevFamily(recv_size=4096).qstats_get({"scope": "queue"}, dump=True) + # Reformat the output into {ifindex: {rx: [id, id, ...], tx: [id, id, ...]}} + parsed = {} + for entry in queues: + ifindex = entry["ifindex"] + if ifindex not in parsed: + parsed[ifindex] = {"rx":[], "tx": []} + parsed[ifindex][entry["queue-type"]].append(entry['queue-id']) + # Now, validate + for ifindex, queues in parsed.items(): + for qtype in ['rx', 'tx']: + ksft_eq(len(queues[qtype]), len(set(queues[qtype])), + comment="repeated queue keys") + ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1, + comment="missing queue keys") + # Test invalid dumps # 0 is invalid with ksft_raises(NlError) as cm: @@ -158,7 +175,7 @@ rtnl = RtnlFamily() def main() -> None: - with NetDrvEnv(__file__) as cfg: + with NetDrvEnv(__file__, queue_count=100) as cfg: ksft_run([check_pause, check_fec, pkt_byte_sum, qstat_by_ifindex, check_down], args=(cfg, )) -- 2.47.1

8 months, 1 week

2
2
0 0

[PATCH net-next v15 00/22] Introducing OpenVPN Data Channel Offload

by Antonio Quartulli

Notable changes since v14: * added socket-netnsid netlink peer attribute containing the socket netns * avoided dereferencing ovpn_priv if NULL in ovpn_udp_encap_recv() err path (reported by smatch) * released ref to peer in ovpn_recv() err path * made sa_len signed in ovpn_peer_get_by_transp_addr_p2p() (reported by smatch) * avoided starting non-doxygen comments with /** in ovpn-cli.c tool * shortened peer timeout waiting time in kselftest script Please note that some patches were already reviewed by Andre Lunn, Donald Hunter and Shuah Khan. They have retained the Reviewed-by tag since no major code modification has happened since the review. The latest code can also be found at: https://github.com/OpenVPN/linux-kernel-ovpn Thanks a lot! Best Regards, Antonio Quartulli OpenVPN Inc. --- Antonio Quartulli (22): net: introduce OpenVPN Data Channel Offload (ovpn) ovpn: add basic netlink support ovpn: add basic interface creation/destruction/management routines ovpn: keep carrier always on for MP interfaces ovpn: introduce the ovpn_peer object ovpn: introduce the ovpn_socket object ovpn: implement basic TX path (UDP) ovpn: implement basic RX path (UDP) ovpn: implement packet processing ovpn: store tunnel and transport statistics ovpn: implement TCP transport ovpn: implement multi-peer support ovpn: implement peer lookup logic ovpn: implement keepalive mechanism ovpn: add support for updating local UDP endpoint ovpn: add support for peer floating ovpn: implement peer add/get/dump/delete via netlink ovpn: implement key add/get/del/swap via netlink ovpn: kill key and notify userspace in case of IV exhaustion ovpn: notify userspace when a peer is deleted ovpn: add basic ethtool support testing/selftests: add test tool and scripts for ovpn module Documentation/netlink/specs/ovpn.yaml | 372 +++ MAINTAINERS | 11 + drivers/net/Kconfig | 14 + drivers/net/Makefile | 1 + drivers/net/ovpn/Makefile | 22 + drivers/net/ovpn/bind.c | 55 + drivers/net/ovpn/bind.h | 101 + drivers/net/ovpn/crypto.c | 211 ++ drivers/net/ovpn/crypto.h | 145 ++ drivers/net/ovpn/crypto_aead.c | 383 ++++ drivers/net/ovpn/crypto_aead.h | 33 + drivers/net/ovpn/io.c | 446 ++++ drivers/net/ovpn/io.h | 34 + drivers/net/ovpn/main.c | 339 +++ drivers/net/ovpn/main.h | 14 + drivers/net/ovpn/netlink-gen.c | 213 ++ drivers/net/ovpn/netlink-gen.h | 41 + drivers/net/ovpn/netlink.c | 1189 ++++++++++ drivers/net/ovpn/netlink.h | 18 + drivers/net/ovpn/ovpnstruct.h | 57 + drivers/net/ovpn/peer.c | 1266 +++++++++++ drivers/net/ovpn/peer.h | 163 ++ drivers/net/ovpn/pktid.c | 129 ++ drivers/net/ovpn/pktid.h | 87 + drivers/net/ovpn/proto.h | 118 + drivers/net/ovpn/skb.h | 59 + drivers/net/ovpn/socket.c | 180 ++ drivers/net/ovpn/socket.h | 55 + drivers/net/ovpn/stats.c | 21 + drivers/net/ovpn/stats.h | 47 + drivers/net/ovpn/tcp.c | 578 +++++ drivers/net/ovpn/tcp.h | 33 + drivers/net/ovpn/udp.c | 397 ++++ drivers/net/ovpn/udp.h | 23 + include/uapi/linux/if_link.h | 15 + include/uapi/linux/ovpn.h | 111 + include/uapi/linux/udp.h | 1 + net/ipv6/af_inet6.c | 1 + tools/testing/selftests/Makefile | 1 + tools/testing/selftests/net/ovpn/.gitignore | 2 + tools/testing/selftests/net/ovpn/Makefile | 17 + tools/testing/selftests/net/ovpn/config | 10 + tools/testing/selftests/net/ovpn/data64.key | 5 + tools/testing/selftests/net/ovpn/ovpn-cli.c | 2366 ++++++++++++++++++++ tools/testing/selftests/net/ovpn/tcp_peers.txt | 5 + .../testing/selftests/net/ovpn/test-chachapoly.sh | 9 + tools/testing/selftests/net/ovpn/test-float.sh | 9 + tools/testing/selftests/net/ovpn/test-tcp.sh | 9 + tools/testing/selftests/net/ovpn/test.sh | 182 ++ tools/testing/selftests/net/ovpn/udp_peers.txt | 5 + 50 files changed, 9603 insertions(+) --- base-commit: 65fb414c93f486cef5408951350f20552113abd0 change-id: 20241002-b4-ovpn-eeee35c694a2 Best regards, -- Antonio Quartulli <antonio(a)openvpn.net>

8 months, 1 week

3
36
0 0

[PATCH v2 resend] selftests: timers: clocksource-switch: Adapt progress to kselftest framework

by Geert Uytterhoeven

When adapting the test to the kselftest framework, a few printf() calls indicating test progress were not updated. Fix this by replacing these printf() calls by ksft_print_msg() calls. Fixes: ce7d101750ff8450 ("selftests: timers: clocksource-switch: adapt to kselftest framework") Signed-off-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Reviewed-by: Thomas Gleixner <tglx(a)linutronix.de> --- v2: - Add Reviewed-by. When just running the test, the output looks like: # Validating clocksource arch_sys_counter TAP version 13 1..12 ok 1 CLOCK_REALTIME ... # Validating clocksource ffca0000.timer TAP version 13 1..12 ok 1 CLOCK_REALTIME ... When redirecting the test output to a file, the progress prints are not interspersed with the test output, but collated at the end: TAP version 13 1..12 ok 1 CLOCK_REALTIME ... TAP version 13 1..12 ok 1 CLOCK_REALTIME ... # Totals: pass:6 fail:0 xfail:0 xpass:0 skip:6 error:0 # Validating clocksource arch_sys_counter # Validating clocksource ffca0000.timer ... This makes it hard to match the test results with the timer under test. Is there a way to fix this? The test does use fork(). Thanks! --- tools/testing/selftests/timers/clocksource-switch.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/timers/clocksource-switch.c b/tools/testing/selftests/timers/clocksource-switch.c index c5264594064c8516..83faa4e354e389c2 100644 --- a/tools/testing/selftests/timers/clocksource-switch.c +++ b/tools/testing/selftests/timers/clocksource-switch.c @@ -156,8 +156,8 @@ int main(int argc, char **argv) /* Check everything is sane before we start switching asynchronously */ if (do_sanity_check) { for (i = 0; i < count; i++) { - printf("Validating clocksource %s\n", - clocksource_list[i]); + ksft_print_msg("Validating clocksource %s\n", + clocksource_list[i]); if (change_clocksource(clocksource_list[i])) { status = -1; goto out; @@ -169,7 +169,7 @@ int main(int argc, char **argv) } } - printf("Running Asynchronous Switching Tests...\n"); + ksft_print_msg("Running Asynchronous Switching Tests...\n"); pid = fork(); if (!pid) return run_tests(runtime); -- 2.34.1

8 months, 1 week

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror December 2024