December 2024 - Linux-kselftest-mirror

[PATCH net-next 0/4] selftests/net: packetdrill: import multiple tests

by Soham Chakradeo

From: Soham Chakradeo <sohamch(a)google.com> Import tests for the following features (folder names in brackets): ECN (ecn) : RFC 3168 Close (close) : RFC 9293 TCP_INFO (tcp_info) : RFC 9293 Fast recovery (fast_recovery) : RFC 5681 Timestamping (timestamping) : RFC 1323 Nagle (nagle) : RFC 896 Selective Acknowledgments (sack) : RFC 2018 Recent Timestamp (ts_recent) : RFC 1323 Send file (sendfile) Syscall bad arg (syscall_bad_arg) Validate (validate) Blocking (blocking) Splice (splice) End of record (eor) Limited transmit (limited_transmit) Procedure to import and test the packetdrill tests into upstream linux is explained in the first patch of this series These tests have many authors. We only import them here from github.com/google/packetdrill. Thanks to the following authors fo their contributions over the years to these tests: Neal Cardwell, Shuo Chen, Yuchung Cheng, Jerry Chu, Eric Dumazet, Luke Hsiao, Priyaranjan Jha, Chonggang Li, Tanner Love, John Sperbeck, Wei Wang and Maciej Żenczykowski. For more info see the original github commits, such as https://github.com/google/packetdrill/commit/8229c94928ac. Signed-off-by: Willem de Bruijn <willemb(a)google.com> Signed-off-by: Soham Chakradeo <sohamch(a)google.com> Soham Chakradeo (4): selftests/net: packetdrill: import tcp/ecn , tcp/close , tcp/sack , tcp/tcp_info selftests/net: packetdrill: import tcp/fast_recovery , tcp/nagle , tcp/timestamping selftests/net: packetdrill: import tcp/eor , tcp/splice , tcp/ts_recent , tcp/blocking selftests/net: packetdrill: import tcp/user_timeout , tcp/validate , tcp/sendfile , tcp/limited-transmit , tcp/syscall_bad_arg .../tcp_blocking_blocking-accept.pkt | 18 +++ .../tcp_blocking_blocking-connect.pkt | 13 ++ .../tcp_blocking_blocking-read.pkt | 29 ++++ .../tcp_blocking_blocking-write.pkt | 35 +++++ ...lose_close-local-close-then-remote-fin.pkt | 23 +++ .../tcp_close_close-on-syn-sent.pkt | 21 +++ .../tcp_close_close-remote-fin-then-close.pkt | 36 +++++ .../net/packetdrill/tcp_ecn_ecn-uses-ect0.pkt | 21 +++ .../packetdrill/tcp_eor_no-coalesce-large.pkt | 38 +++++ .../tcp_eor_no-coalesce-retrans.pkt | 72 +++++++++ .../packetdrill/tcp_eor_no-coalesce-small.pkt | 36 +++++ .../tcp_eor_no-coalesce-subsequent.pkt | 66 ++++++++ .../tcp_fast_recovery_prr-ss-10pkt-lost-1.pkt | 72 +++++++++ ...t_recovery_prr-ss-30pkt-lost-1_4-11_16.pkt | 50 ++++++ ...tcp_fast_recovery_prr-ss-30pkt-lost1_4.pkt | 43 ++++++ ...ecovery_prr-ss-ack-below-snd_una-cubic.pkt | 41 +++++ ...ited_transmit_limited-transmit-no-sack.pkt | 53 +++++++ ...limited_transmit_limited-transmit-sack.pkt | 50 ++++++ .../packetdrill/tcp_nagle_https_client.pkt | 40 +++++ .../tcp_nagle_sendmsg_msg_more.pkt | 66 ++++++++ .../tcp_nagle_sockopt_cork_nodelay.pkt | 43 ++++++ .../tcp_sack_sack-route-refresh-ip-tos.pkt | 37 +++++ ...ack_sack-shift-sacked-2-6-8-3-9-nofack.pkt | 64 ++++++++ ..._sack_sack-shift-sacked-7-3-4-8-9-fack.pkt | 66 ++++++++ ..._sack_sack-shift-sacked-7-5-6-8-9-fack.pkt | 62 ++++++++ .../tcp_sendfile_sendfile-simple.pkt | 26 ++++ .../tcp_splice_tcp_splice_loop_test.pkt | 20 +++ ...scall_bad_arg_fastopen-invalid-buf-ptr.pkt | 42 +++++ .../tcp_syscall_bad_arg_sendmsg-empty-iov.pkt | 31 ++++ ...yscall_bad_arg_syscall-invalid-buf-ptr.pkt | 25 +++ .../tcp_tcp_info_tcp-info-last_data_recv.pkt | 21 +++ .../tcp_tcp_info_tcp-info-rwnd-limited.pkt | 54 +++++++ .../tcp_tcp_info_tcp-info-sndbuf-limited.pkt | 39 +++++ ...tcp_timestamping_client-only-last-byte.pkt | 92 +++++++++++ .../packetdrill/tcp_timestamping_partial.pkt | 91 +++++++++++ .../packetdrill/tcp_timestamping_server.pkt | 145 ++++++++++++++++++ .../packetdrill/tcp_ts_recent_fin_tsval.pkt | 23 +++ .../packetdrill/tcp_ts_recent_invalid_ack.pkt | 25 +++ .../packetdrill/tcp_ts_recent_reset_tsval.pkt | 25 +++ .../tcp_user_timeout_user-timeout-probe.pkt | 37 +++++ .../tcp_user_timeout_user_timeout.pkt | 33 ++++ ...validate_validate-established-no-flags.pkt | 24 +++ 42 files changed, 1848 insertions(+) create mode 100644 tools/testing/selftests/net/packetdrill/tcp_blocking_blocking-accept.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_blocking_blocking-connect.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_blocking_blocking-read.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_blocking_blocking-write.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_close_close-local-close-then-remote-fin.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_close_close-on-syn-sent.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_close_close-remote-fin-then-close.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_ecn_ecn-uses-ect0.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_eor_no-coalesce-large.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_eor_no-coalesce-retrans.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_eor_no-coalesce-small.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_eor_no-coalesce-subsequent.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_fast_recovery_prr-ss-10pkt-lost-1.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_fast_recovery_prr-ss-30pkt-lost-1_4-11_16.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_fast_recovery_prr-ss-30pkt-lost1_4.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_fast_recovery_prr-ss-ack-below-snd_una-cubic.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_limited_transmit_limited-transmit-no-sack.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_limited_transmit_limited-transmit-sack.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_nagle_https_client.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_nagle_sendmsg_msg_more.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_nagle_sockopt_cork_nodelay.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_sack_sack-route-refresh-ip-tos.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_sack_sack-shift-sacked-2-6-8-3-9-nofack.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_sack_sack-shift-sacked-7-3-4-8-9-fack.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_sack_sack-shift-sacked-7-5-6-8-9-fack.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_sendfile_sendfile-simple.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_splice_tcp_splice_loop_test.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_syscall_bad_arg_fastopen-invalid-buf-ptr.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_syscall_bad_arg_sendmsg-empty-iov.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_syscall_bad_arg_syscall-invalid-buf-ptr.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_tcp_info_tcp-info-last_data_recv.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_tcp_info_tcp-info-rwnd-limited.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_tcp_info_tcp-info-sndbuf-limited.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_timestamping_client-only-last-byte.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_timestamping_partial.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_timestamping_server.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_ts_recent_fin_tsval.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_ts_recent_invalid_ack.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_ts_recent_reset_tsval.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_user_timeout_user-timeout-probe.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_user_timeout_user_timeout.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_validate_validate-established-no-flags.pkt -- 2.47.0.338.g60cca15819-goog

1 day, 2 hours

5
13
0 0

[PATCH] selftests/ring-buffer: Add test for out-of-bound pgoff mapping

by Vincent Donnefort

Extend the ring-buffer mapping test coverage by checking an out-of-bound pgoff which has proven to be problematic in the past. Cc: Shuah Khan <skhan(a)linuxfoundation.org> Cc: linux-kselftest(a)vger.kernel.org Signed-off-by: Vincent Donnefort <vdonnefort(a)google.com> diff --git a/tools/testing/selftests/ring-buffer/map_test.c b/tools/testing/selftests/ring-buffer/map_test.c index d10a847130fb..a58f520f2f41 100644 --- a/tools/testing/selftests/ring-buffer/map_test.c +++ b/tools/testing/selftests/ring-buffer/map_test.c @@ -233,12 +233,18 @@ TEST_F(map, data_mmap) ASSERT_NE(data, MAP_FAILED); munmap(data, data_len); - /* Overflow the available subbufs by 1 */ + /* Offset within ring-buffer bounds, mapping size overflow */ meta_len += desc->meta->subbuf_size * 2; data = mmap(NULL, data_len, PROT_READ, MAP_SHARED, desc->cpu_fd, meta_len); ASSERT_EQ(data, MAP_FAILED); + /* Offset outside ring-buffer bounds */ + data_len = desc->meta->subbuf_size * desc->meta->nr_subbufs; + data = mmap(NULL, data_len, PROT_READ, MAP_SHARED, + desc->cpu_fd, data_len + (desc->meta->subbuf_size * 2)); + ASSERT_EQ(data, MAP_FAILED); + /* Verify meta-page padding */ if (desc->meta->meta_page_size > getpagesize()) { data_len = desc->meta->meta_page_size; base-commit: 61baee2dc5341c936e7fa7b1ca33c5607868de69 -- 2.47.1.613.gc27f4b7a9f-goog

1 day, 15 hours

2
1
0 0

[PATCH v3 00/14] iommufd: Add vIOMMU infrastructure (Part-3: vIRQ)

by Nicolin Chen

As the part-3 of the vIOMMU infrastructure, this series introduces a vIRQ object. The existing FAULT object provides a nice notification pathway to the user space already, so let vIRQ reuse the infrastructure. Mimicing the HWPT structure, add a common EVENTQ structure to support its derivatives: IOMMUFD_OBJ_FAULT (existing) and IOMMUFD_OBJ_VIRQ (new). IOMMUFD_CMD_VIRQ_ALLOC is introduced to allocate vIRQ objects for vIOMMUs. One vIOMMU can have multiple vIRQs in different types but can not support multiple vIRQs with the same types. The forwarding part is fairly simple but might need to replace a physical device ID with a virtual device ID in a driver-level IRQ data structure. So, this comes with some helpers for drivers to use. As usual, this series comes with the selftest coverage for this new vIRQ, and with a real world use case in the ARM SMMUv3 driver. This is on Github: https://github.com/nicolinc/iommufd/commits/iommufd_virq-v3 Testing with RMR patches for MSI: https://github.com/nicolinc/iommufd/commits/iommufd_virq-v3-with-rmr Paring QEMU branch for testing: https://github.com/nicolinc/qemu/commits/wip/for_iommufd_virq-v3 Changelog v3 * Rebase on Will's for-joerg/arm-smmu/updates for arm_smmu_event series * Add "Reviewed-by" lines from Kevin * Fix typos in comments, kdocs, and jump tags * Add a patch to sort struct iommufd_ioctl_op * Update iommufd's userpsace-api documentation * Update uAPI kdoc to quote SMMUv3 offical spec * Drop the unused workqueue in struct iommufd_virq * Drop might_sleep() in iommufd_viommu_report_irq() helper * Add missing "break" in iommufd_viommu_get_vdev_id() helper * Shrink the scope of the vmaster's read lock in SMMUv3 driver * Pass in two arguments to iommufd_eventq_virq_handler() helper * Move "!ops || !ops->read" validation into iommufd_eventq_init() * Move "fault->ictx = ictx" closer to iommufd_ctx_get(fault->ictx) * Update commit message for arm_smmu_attach_prepare/commit_vmaster() * Keep "iommufd_fault" as-is and rename "iommufd_eventq_virq" to just "iommufd_virq" v2 https://lore.kernel.org/all/cover.1733263737.git.nicolinc@nvidia.com/ * Rebase on v6.13-rc1 * Add IOPF and vIRQ in iommufd.rst (userspace-api) * Add a proper locking in iommufd_event_virq_destroy * Add iommufd_event_virq_abort with a lockdep_assert_held * Rename "EVENT_*" to "EVENTQ_*" to describe the objects better * Reorganize flows in iommufd_eventq_virq_alloc for abort() to work * Adde struct arm_smmu_vmaster to store vSID upon attaching to a nested domain, calling a newly added iommufd_viommu_get_vdev_id helper * Adde an arm_vmaster_report_event helper in arm-smmu-v3-iommufd file to simplify the routine in arm_smmu_handle_evt() of the main driver v1 https://lore.kernel.org/all/cover.1724777091.git.nicolinc@nvidia.com/ Thanks! Nicolin Nicolin Chen (14): iommufd: Keep IOCTL list in an alphabetical order iommufd/fault: Add an iommufd_fault_init() helper iommufd/fault: Move iommufd_fault_iopf_handler() to header iommufd: Abstract an iommufd_eventq from iommufd_fault iommufd: Rename fault.c to eventq.c iommufd: Add IOMMUFD_OBJ_VIRQ and IOMMUFD_CMD_VIRQ_ALLOC iommufd/viommu: Add iommufd_viommu_get_vdev_id helper iommufd/viommu: Add iommufd_viommu_report_irq helper iommufd/selftest: Require vdev_id when attaching to a nested domain iommufd/selftest: Add IOMMU_TEST_OP_TRIGGER_VIRQ for vIRQ coverage iommufd/selftest: Add IOMMU_VIRQ_ALLOC test coverage Documentation: userspace-api: iommufd: Update FAULT and VIRQ iommu/arm-smmu-v3: Introduce struct arm_smmu_vmaster iommu/arm-smmu-v3: Report IRQs that belong to devices attached to vIOMMU drivers/iommu/iommufd/Makefile | 2 +- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 30 ++ drivers/iommu/iommufd/iommufd_private.h | 115 ++++++- drivers/iommu/iommufd/iommufd_test.h | 10 + include/linux/iommufd.h | 20 ++ include/uapi/linux/iommufd.h | 46 +++ tools/testing/selftests/iommu/iommufd_utils.h | 63 ++++ .../arm/arm-smmu-v3/arm-smmu-v3-iommufd.c | 65 ++++ drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 90 ++++-- drivers/iommu/iommufd/driver.c | 57 ++++ drivers/iommu/iommufd/{fault.c => eventq.c} | 298 ++++++++++++++---- drivers/iommu/iommufd/hw_pagetable.c | 6 +- drivers/iommu/iommufd/main.c | 20 +- drivers/iommu/iommufd/selftest.c | 53 ++++ drivers/iommu/iommufd/viommu.c | 2 + tools/testing/selftests/iommu/iommufd.c | 27 ++ .../selftests/iommu/iommufd_fail_nth.c | 6 + Documentation/userspace-api/iommufd.rst | 16 + 18 files changed, 809 insertions(+), 117 deletions(-) rename drivers/iommu/iommufd/{fault.c => eventq.c} (55%) base-commit: 376ce8b35ed15d5deee57bdecd8449f6a4df4c42 -- 2.43.0

1 day, 23 hours

2
20
0 0

[PATCH net-next] selftests: drv-net: assume stats refresh is 0 if no ethtool -c support

by Jakub Kicinski

Tests using HW stats wait for them to stabilize, using data from ethtool -c as the delay. Not all drivers implement ethtool -c so handle the errors gracefully. Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: shuah(a)kernel.org CC: willemb(a)google.com CC: petrm(a)nvidia.com CC: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/drivers/net/lib/py/env.py | 9 +++++++-- tools/testing/selftests/net/lib/py/utils.py | 6 ++++-- 2 files changed, 11 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/drivers/net/lib/py/env.py b/tools/testing/selftests/drivers/net/lib/py/env.py index 1ea9bb695e94..fea343f209ea 100644 --- a/tools/testing/selftests/drivers/net/lib/py/env.py +++ b/tools/testing/selftests/drivers/net/lib/py/env.py @@ -5,7 +5,7 @@ import time from pathlib import Path from lib.py import KsftSkipEx, KsftXfailEx from lib.py import ksft_setup -from lib.py import cmd, ethtool, ip +from lib.py import cmd, ethtool, ip, CmdExitFailure from lib.py import NetNS, NetdevSimDev from .remote import Remote @@ -234,7 +234,12 @@ from .remote import Remote Good drivers will tell us via ethtool what their sync period is. """ if self._stats_settle_time is None: - data = ethtool("-c " + self.ifname, json=True)[0] + data = {} + try: + data = ethtool("-c " + self.ifname, json=True)[0] + except CmdExitFailure as e: + if "Operation not supported" not in e.cmd.stderr: + raise self._stats_settle_time = 0.025 + \ data.get('stats-block-usecs', 0) / 1000 / 1000 diff --git a/tools/testing/selftests/net/lib/py/utils.py b/tools/testing/selftests/net/lib/py/utils.py index 72590c3f90f1..9e3bcddcf3e8 100644 --- a/tools/testing/selftests/net/lib/py/utils.py +++ b/tools/testing/selftests/net/lib/py/utils.py @@ -10,7 +10,9 @@ import time class CmdExitFailure(Exception): - pass + def __init__(self, msg, cmd_obj): + super().__init__(msg) + self.cmd = cmd_obj class cmd: @@ -48,7 +50,7 @@ import time if len(stderr) > 0 and stderr[-1] == "\n": stderr = stderr[:-1] raise CmdExitFailure("Command failed: %s\nSTDOUT: %s\nSTDERR: %s" % - (self.proc.args, stdout, stderr)) + (self.proc.args, stdout, stderr), self) class bkg(cmd): -- 2.47.1

2 days

4
5
0 0

[RFC PATCH 0/2] ptp: add PTP_SYS_OFFSET_STAT ioctl, support it in virtio_rtc

by Peter Hilber

This RFC patch series proposes a new ioctl PTP_SYS_OFFSET_STAT and adds support for it in the proposed virtio_rtc driver [1]. The new PTP_SYS_OFFSET_STAT ioctl provides a cross-timestamp like PTP_SYS_OFFSET_PRECISE2, plus any the following status information (for now): - for UTC timescale clocks: leap second related status, - clock accuracy. The second commit adds support for the ioctl in the proposed virtio_rtc driver, and hence depends on the patch series "Add virtio_rtc module" [1]. [1] https://lore.kernel.org/lkml/20241219201118.2233-1-quic_philber@quicinc.com… Signed-off-by: Peter Hilber <quic_philber(a)quicinc.com> Peter Hilber (2): ptp: add PTP_SYS_OFFSET_STAT for xtstamping with status virtio_rtc: Support PTP_SYS_OFFSET_STAT ioctl drivers/ptp/ptp_chardev.c | 39 ++++++++ drivers/ptp/ptp_clock.c | 9 ++ drivers/virtio/Kconfig | 4 +- drivers/virtio/virtio_rtc_driver.c | 122 +++++++++++++++++++++++- drivers/virtio/virtio_rtc_internal.h | 3 +- drivers/virtio/virtio_rtc_ptp.c | 25 +++-- include/linux/ptp_clock_kernel.h | 31 ++++++ include/uapi/linux/ptp_clock.h | 130 +++++++++++++++++++++++++- tools/testing/selftests/ptp/Makefile | 2 +- tools/testing/selftests/ptp/testptp.c | 126 ++++++++++++++++++++++++- 10 files changed, 471 insertions(+), 20 deletions(-) base-commit: 8a8009abbfa04e58f1b01b20534cac9e8fe61a46 -- 2.43.0

2 days

2
4
0 0

[PATCH v2] selftests: arm coresight: sysfsmode testing

by Linu Cherian

Add sysfs mode selftest for ARM Coresight hardware tracer. The test will run below sequence for all possible sinks for every trace source available on the system. 1. Enable source and sink device to start tracing in sysfs mode 3. Run a standard dd command to be traced 4. Stop tracing 5. Readback tracedata - Test case is pass if the readback of tracedata is success else failure. - In case of ETR sink, the test is run with both default buffer mode and reserved buffer mode(if available). Sample output: selftests: drivers/hwtracing/coresight: sysfs_test_trace.sh Running sysfs trace with default settings 64+0 records in 64+0 records out 67108864 bytes (67 MB, 64 MiB) copied, 0.196945 s, 341 MB/s 32+0 records in 32+0 records out 16384 bytes (16 kB, 16 KiB) copied, 0.000805288 s, 20.3 MB/s CoreSight path testing (CPU0 -> tmc_etf0): PASS Signed-off-by: Linu Cherian <lcherian(a)marvell.com> --- Changelog from v1: - Added test description in commit message suggested by Shuah - Added config dependency file suggested by Shuah - Added TARGETS as suggested by James - Skipped TPIU as suggested by James - Added Reviewed-by tag tools/testing/selftests/Makefile | 1 + .../drivers/hwtracing/coresight/Makefile | 5 + .../drivers/hwtracing/coresight/config | 7 + .../hwtracing/coresight/sysfs_test_trace.sh | 146 ++++++++++++++++++ 4 files changed, 159 insertions(+) create mode 100644 tools/testing/selftests/drivers/hwtracing/coresight/Makefile create mode 100644 tools/testing/selftests/drivers/hwtracing/coresight/config create mode 100755 tools/testing/selftests/drivers/hwtracing/coresight/sysfs_test_trace.sh diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 363d031a16f7..15788c32de6b 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -18,6 +18,7 @@ TARGETS += devices/error_logs TARGETS += devices/probe TARGETS += dmabuf-heaps TARGETS += drivers/dma-buf +TARGETS += drivers/hwtracing/coresight TARGETS += drivers/s390x/uvdevice TARGETS += drivers/net TARGETS += drivers/net/bonding diff --git a/tools/testing/selftests/drivers/hwtracing/coresight/Makefile b/tools/testing/selftests/drivers/hwtracing/coresight/Makefile new file mode 100644 index 000000000000..7dc68ae1c0a9 --- /dev/null +++ b/tools/testing/selftests/drivers/hwtracing/coresight/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + +TEST_PROGS = sysfs_test_trace.sh + +include ../../../lib.mk diff --git a/tools/testing/selftests/drivers/hwtracing/coresight/config b/tools/testing/selftests/drivers/hwtracing/coresight/config new file mode 100644 index 000000000000..47e9256957d3 --- /dev/null +++ b/tools/testing/selftests/drivers/hwtracing/coresight/config @@ -0,0 +1,7 @@ +CONFIG_CORESIGHT=y +CONFIG_CORESIGHT_LINKS_AND_SINKS=y +CONFIG_CORESIGHT_LINK_AND_SINK_TMC=y +CONFIG_CORESIGHT_SINK_ETBV10 +CONFIG_CORESIGHT_SOURCE_ETM3X +CONFIG_CORESIGHT_SOURCE_ETM4X=y +CONFIG_CORESIGHT_TRBE=y diff --git a/tools/testing/selftests/drivers/hwtracing/coresight/sysfs_test_trace.sh b/tools/testing/selftests/drivers/hwtracing/coresight/sysfs_test_trace.sh new file mode 100755 index 000000000000..1939bbede1af --- /dev/null +++ b/tools/testing/selftests/drivers/hwtracing/coresight/sysfs_test_trace.sh @@ -0,0 +1,146 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2024 Marvell. + +# Test Arm CoreSight trace capture in sysfs mode +# Based on tools/perf/tests/shell/test_arm_coresight.sh + +glb_err=0 + +arm_cs_report() { + if [ $2 != 0 ]; then + echo "$1: FAIL" + glb_err=$2 + else + echo "$1: PASS" + fi +} + +is_device_sink() { + # If the node of "enable_sink" is existed under the device path, this + # means the device is a sink device. Need to exclude 'tpiu' since it + # doesn't have a readable file. + echo "$1" | grep -E -q -v "tpiu" + + if [ $? -eq 0 ] && [ -e "$1/enable_sink" ]; then + + return 0 + else + return 1 + fi +} + +# Configure sink for buffer mode +cfg_sink_buf_mode() { + sink_dev=$1 + mode=$2 + # Set buffer mode if supported + if [ -e "$sink_dev/buf_modes_available" ]; then + cat $sink_dev/buf_modes_available | grep -E -q $mode + if [ $? -eq 0 ]; then + echo $mode > $sink_dev/buf_mode_preferred + return 0 + fi + fi + + return 1 +} + +run_app() { + + taskset -c $1 dd if=/dev/urandom of=/dev/null bs=1M count=64 +} + +sysfs_trace() { + src_dev=$1 + sink_dev=$2 + cpu=$3 + + # Enable sink device + echo 1 > $sink_dev/enable_sink + # Enable source device + echo 1 > $src_dev/enable_source + + # Run app to be traced + run_app $cpu + + # Read back trace data + dd if=/dev/$sink_dev_name of=/tmp/tracedata + + # Verify if read is successful + err=$? + + # Disable source device + echo 0 > $src_dev/enable_source + + # Diskable sink device + echo 0 > $sink_dev/enable_sink + + arm_cs_report "CoreSight path testing (CPU$cpu -> $sink_dev_name)" $err +} + +try_sysfs_trace_resrv_buf() { + src_dev=$1 + sink_dev=$2 + cpu=$3 + + # Configure the resrved buffer mode if available + cfg_sink_buf_mode $sink_dev "resrv" + if [ $? -eq 0 ]; then + echo "Running sysfs trace with resrv buf mode" + sysfs_trace $src_dev $sink_dev $cpu + # Restore buffer mode + cfg_sink_buf_mode $sink_dev "auto" + if [ $? -eq 1 ]; then + echo "Failed to restore default buf mode" + fi + fi +} + +arm_cs_iterate_devices() { + src_dev=$1 + cpu=$3 + for cdev in $2/connections/out\:*; do + + # Skip testing if it's not a directory + ! [ -d $cdev ] && continue; + + # Read out its symbol link file name + sink_dev=`readlink -f $cdev` + + # Extract device name from path, e.g. + # sink_dev = '/sys/devices/platform/20010000.etf/tmc_etf0' + # `> sink_dev_name = 'tmc_etf0' + sink_dev_name=$(basename $sink_dev) + + if is_device_sink $sink_dev; then + # Run trace with resrv buf mode (if available) + try_sysfs_trace_resrv_buf $src_dev $sink_dev $cpu + + # Run the default mode + echo "Running sysfs trace with default settings" + sysfs_trace $src_dev $sink_dev $cpu + fi + + arm_cs_iterate_devices $src_dev $cdev $cpu + + done +} + +arm_cs_etm_traverse_path_test() { + # Iterate for every ETM device + for dev in /sys/bus/event_source/devices/cs_etm/cpu*; do + # Canonicalize the path + dev=`readlink -f $dev` + + # Find the ETM device belonging to which CPU + cpu=`cat $dev/cpu` + + # Use depth-first search (DFS) to iterate outputs + arm_cs_iterate_devices $dev $dev $cpu + done +} + +arm_cs_etm_traverse_path_test + +exit $glb_err -- 2.34.1

2 days, 4 hours

2
1
0 0

[PATCH v4 0/4] Add support for the Idle HLT intercept feature

by Manali Shukla

The upcoming new Idle HLT Intercept feature allows for the HLT instruction execution by a vCPU to be intercepted by the hypervisor only if there are no pending V_INTR and V_NMI events for the vCPU. When the vCPU is expected to service the pending V_INTR and V_NMI events, the Idle HLT intercept won’t trigger. The feature allows the hypervisor to determine if the vCPU is actually idle and reduces wasteful VMEXITs. The idle HLT intercept feature is used for enlightened guests who wish to securely handle the events. When an enlightened guest does a HLT while an interrupt is pending, hypervisor will not have a way to figure out whether the guest needs to be re-entered or not. The Idle HLT intercept feature allows the HLT execution only if there are no pending V_INTR and V_NMI events. Presence of the Idle HLT Intercept feature is indicated via CPUID function Fn8000_000A_EDX[30]. Document for the Idle HLT intercept feature is available at [1]. This series is based on kvm-next/next (64dbb3a771a1) + [2]. Experiments done: ---------------- kvm_amd.avic is set to '0' for this experiment. The below numbers represent the average of 10 runs. Normal guest (L1) The below netperf command was run on the guest with smp = 1 (pinned). netperf -H <host ip> -t TCP_RR -l 60 ---------------------------------------------------------------- |with Idle HLT(transactions/Sec)|w/o Idle HLT(transactions/Sec)| ---------------------------------------------------------------- | 25645.7136 | 25773.2796 | ---------------------------------------------------------------- Number of transactions/sec with and without idle HLT intercept feature are almost same. Nested guest (L2) The below netperf command was run on L2 guest with smp = 1 (pinned). netperf -H <host ip> -t TCP_RR -l 60 ---------------------------------------------------------------- |with Idle HLT(transactions/Sec)|w/o Idle HLT(transactions/Sec)| ---------------------------------------------------------------- | 5655.4468 | 5755.2189 | ---------------------------------------------------------------- Number of transactions/sec with and without idle HLT intercept feature are almost same. Testing Done: - Tested the functionality for the Idle HLT intercept feature using selftest svm_idle_hlt_test. - Tested SEV and SEV-ES guest for the Idle HLT intercept functionality. - Tested the Idle HLT intercept functionality on nested guest. v3 -> v4 - Drop the patches to add vcpu_get_stat() into a new series [2]. - Added nested Idle HLT intercept support. v2 -> v3 - Incorporated Andrew's suggestion to structure vcpu_stat_types in a way that each architecture can share the generic types and also provide its own. v1 -> v2 - Done changes in svm_idle_hlt_test based on the review comments from Sean. - Added an enum based approach to get binary stats in vcpu_get_stat() which doesn't use string to get stat data based on the comments from Sean. - Added self_halt() and cli() helpers based on the comments from Sean. [1]: AMD64 Architecture Programmer's Manual Pub. 24593, April 2024, Vol 2, 15.9 Instruction Intercepts (Table 15-7: IDLE_HLT). https://bugzilla.kernel.org/attachment.cgi?id=306250 [2]: https://lore.kernel.org/kvm/20241021062226.108657-1-manali.shukla@amd.com/T… Manali Shukla (4): x86/cpufeatures: Add CPUID feature bit for Idle HLT intercept KVM: SVM: Add Idle HLT intercept support KVM: nSVM: implement the nested idle halt intercept KVM: selftests: KVM: SVM: Add Idle HLT intercept test arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/include/asm/svm.h | 1 + arch/x86/include/uapi/asm/svm.h | 2 + arch/x86/kvm/governed_features.h | 1 + arch/x86/kvm/svm/nested.c | 7 ++ arch/x86/kvm/svm/svm.c | 15 +++- tools/testing/selftests/kvm/Makefile | 1 + .../selftests/kvm/include/x86_64/processor.h | 1 + .../selftests/kvm/x86_64/svm_idle_hlt_test.c | 89 +++++++++++++++++++ 9 files changed, 115 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/kvm/x86_64/svm_idle_hlt_test.c base-commit: c8d430db8eec7d4fd13a6bea27b7086a54eda6da prerequisite-patch-id: ca912571db5c004f77b70843b8dd35517ff1267f prerequisite-patch-id: 164ea3b4346f9e04bc69819278d20f5e1b5df5ed prerequisite-patch-id: 90d870f426ebc2cec43c0dd89b701ee998385455 prerequisite-patch-id: 45812b799c517a4521782a1fdbcda881237e1eda -- 2.34.1

2 days, 9 hours

3
12
0 0

[PATCH for-next v2] selftests/Makefile: override the srctree for out-of-tree builds

by Li Zhijian

Fixes an issue where out-of-tree kselftest builds fail when building the BPF and bpftools components. The failure occurs because the top-level Makefile passes a relative srctree path to its sub-Makefiles, which leads to errors in locating necessary files. For example, the following error is encountered: ``` $ make V=1 O=$build/ TARGETS=hid kselftest-all ... make -C ../tools/testing/selftests all make[4]: Entering directory '/path/to/linux/tools/testing/selftests/hid' make -C /path/to/linux/tools/testing/selftests/../../../tools/lib/bpf OUTPUT=/path/to/linux/O/kselftest/hid/tools/build/libbpf/ \ EXTRA_CFLAGS='-g -O0' \ DESTDIR=/path/to/linux/O/kselftest/hid/tools prefix= all install_headers make[5]: Entering directory '/path/to/linux/tools/lib/bpf' ... make[5]: Entering directory '/path/to/linux/tools/bpf/bpftool' Makefile:127: ../tools/build/Makefile.feature: No such file or directory make[5]: *** No rule to make target '../tools/build/Makefile.feature'. Stop. ``` To resolve this, override the srctree in the kselftests's top Makefile when performing an out-of-tree build. This ensures that all sub-Makefiles have the correct path to the source tree, preventing directory resolution errors. Signed-off-by: Li Zhijian <lizhijian(a)fujitsu.com> --- Cc: Masahiro Yamada <masahiroy(a)kernel.org> V2: - handle srctree in selftests itself rather than the linux' top Makefile # Masahiro Yamada <masahiroy(a)kernel.org> V1: https://lore.kernel.org/lkml/20241217031052.69744-1-lizhijian@fujitsu.com/ --- tools/testing/selftests/Makefile | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 3d8a80abd4f0..ab82278353cf 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -154,15 +154,19 @@ override LDFLAGS = override MAKEFLAGS = endif +top_srcdir ?= ../../.. + # Append kselftest to KBUILD_OUTPUT and O to avoid cluttering # KBUILD_OUTPUT with selftest objects and headers installed # by selftests Makefile or lib.mk. +# Override the `srctree` variable to ensure it is correctly resolved in +# sub-Makefiles, such as those within `bpf`, when managing targets like +# `net` and `hid`. ifdef building_out_of_srctree override LDFLAGS = +override srctree := $(top_srcdir) endif -top_srcdir ?= ../../.. - ifeq ("$(origin O)", "command line") KBUILD_OUTPUT := $(O) endif -- 2.44.0

2 days, 10 hours

1
0
0 0

[PATCH 0/6] selftests/nolibc: wire up riscv32

by Thomas Weißschuh

Nolibc has support for riscv32. But the testsuite did not allow to test it so far. Add a test configuration. Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- Thomas Weißschuh (6): tools/nolibc: add support for waitid() selftests/nolibc: use waitid() over waitpid() selftests/nolibc: use a pipe to in vfprintf tests selftests/nolibc: skip tests for unimplemented syscalls selftests/nolibc: rename riscv to riscv64 selftests/nolibc: add configurations for riscv32 tools/include/nolibc/sys.h | 18 ++++++++++++ tools/testing/selftests/nolibc/Makefile | 11 +++++++ tools/testing/selftests/nolibc/nolibc-test.c | 44 ++++++++++++++++------------ tools/testing/selftests/nolibc/run-tests.sh | 2 +- 4 files changed, 56 insertions(+), 19 deletions(-) --- base-commit: 499551201b5f4fd3c0618a3e95e3d0d15ea18f31 change-id: 20241219-nolibc-rv32-cff8a3e22394 Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

2 days, 10 hours

2
9
0 0

[PATCH RFC] Makefile: Export absolute srctree path for out-of-tree builds

by Li Zhijian

Fixes an issue where out-of-tree kselftest builds fail when building the BPF and bpftools components. The failure occurs because the top-level Makefile passes a relative srctree path ('..') to its sub-Makefiles, which leads to errors in locating necessary files. For example, the following error is encountered: ``` $ make V=1 O=$build/ TARGETS=hid kselftest-all ... make -C ../tools/testing/selftests all make[4]: Entering directory '/path/to/linux/tools/testing/selftests/hid' make -C /path/to/linux/tools/testing/selftests/../../../tools/lib/bpf OUTPUT=/path/to/linux/O/kselftest/hid/tools/build/libbpf/ \ EXTRA_CFLAGS='-g -O0' \ DESTDIR=/path/to/linux/O/kselftest/hid/tools prefix= all install_headers make[5]: Entering directory '/path/to/linux/tools/lib/bpf' ... make[5]: Entering directory '/path/to/linux/tools/bpf/bpftool' Makefile:127: ../tools/build/Makefile.feature: No such file or directory make[5]: *** No rule to make target '../tools/build/Makefile.feature'. Stop. ``` To resolve this, the srctree is exported as an absolute path (abs_srctree) when performing an out-of-tree build. This ensures that all sub-Makefiles have the correct path to the source tree, preventing directory resolution errors. Signed-off-by: Li Zhijian <lizhijian(a)fujitsu.com> --- Request for Additional Testing We welcome all contributors and CI systems to test this change thoroughly. In theory, this change should not affect in-tree builds. However, to ensure stability and compatibility, we encourage testing across different configurations. What has been tested? - out-of-tree kernel build - out-of-tree kselftest-all --- Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Makefile b/Makefile index e5b8a8832c0c..36e65806bb5e 100644 --- a/Makefile +++ b/Makefile @@ -275,7 +275,8 @@ else ifeq ($(srcroot)/,$(dir $(CURDIR))) srcroot := .. endif -export srctree := $(if $(KBUILD_EXTMOD),$(abs_srctree),$(srcroot)) +srctree := $(if $(KBUILD_EXTMOD),$(abs_srctree),$(srcroot)) +export srctree := $(if $(building_out_of_srctree),$(abs_srctree),$(srctree)) ifdef building_out_of_srctree export VPATH := $(srcroot) -- 2.44.0

2 days, 17 hours

4
4
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror December 2024