November 2024 - Linux-kselftest-mirror

[PATCH v2 0/5] Improve arm64 pkeys handling in signal delivery

by Kevin Brodsky

This series is a follow-up to Joey's Permission Overlay Extension (POE) series [1] that recently landed on mainline. The goal is to improve the way we handle the register that governs which pkeys/POIndex are accessible (POR_EL0) during signal delivery. As things stand, we may unexpectedly fail to write the signal frame on the stack because POR_EL0 is not reset before the uaccess operations. See patch 3 for more details and the main changes this series brings. A similar series landed recently for x86/MPK [2]; the present series aims at aligning arm64 with x86. Worth noting: once the signal frame is written, POR_EL0 is still set to POR_EL0_INIT, granting access to pkey 0 only. This means that a program that sets up an alternate signal stack with a non-zero pkey will need some assembly trampoline to set POR_EL0 before invoking the real signal handler, as discussed here [3]. This is not ideal, but it makes experimentation with pkeys in signal handlers possible while waiting for a potential interface to control the pkey state when delivering a signal. See Pierre's reply [4] for more information about use-cases and a potential interface. The x86 series also added kselftests to ensure that no spurious SIGSEGV occurs during signal delivery regardless of which pkey is accessible at the point where the signal is delivered. This series adapts those kselftests to allow running them on arm64 (patch 4-5). Finally patch 2 is a clean-up following feedback on Joey's series [5]. I have tested this series on arm64 and x86_64 (booting and running the protection_keys and pkey_sighandler_tests mm kselftests). v1..v2: * In setup_rt_frame(), ensured that POR_EL0 is reset to its original value if we fail to deliver the signal (addresses Catalin's concern [6]). * Renamed *unpriv_access* to *user_access* in patch 3 (suggestion from Dave). * Made what patch 1-2 do explicit in the commit message body (suggestion from Dave). - Kevin [1] https://lore.kernel.org/linux-arm-kernel/20240822151113.1479789-1-joey.goul… [2] https://lore.kernel.org/lkml/20240802061318.2140081-1-aruna.ramakrishna@ora… [3] https://lore.kernel.org/lkml/CABi2SkWxNkP2O7ipkP67WKz0-LV33e5brReevTTtba6oK… [4] https://lore.kernel.org/linux-arm-kernel/87plns8owh.fsf@arm.com/ [5] https://lore.kernel.org/linux-arm-kernel/20241015114116.GA19334@willie-the-… [6] https://lore.kernel.org/linux-arm-kernel/Zw6D2waVyIwYE7wd@arm.com/ Cc: akpm(a)linux-foundation.org Cc: anshuman.khandual(a)arm.com Cc: aruna.ramakrishna(a)oracle.com Cc: broonie(a)kernel.org Cc: catalin.marinas(a)arm.com Cc: dave.hansen(a)linux.intel.com Cc: dave.martin(a)arm.com Cc: jeffxu(a)chromium.org Cc: joey.gouly(a)arm.com Cc: pierre.langlois(a)arm.com Cc: shuah(a)kernel.org Cc: sroettger(a)google.com Cc: will(a)kernel.org Cc: linux-kselftest(a)vger.kernel.org Cc: x86(a)kernel.org Kevin Brodsky (5): arm64: signal: Remove unused macro arm64: signal: Remove unnecessary check when saving POE state arm64: signal: Improve POR_EL0 handling to avoid uaccess failures selftests/mm: Use generic pkey register manipulation selftests/mm: Enable pkey_sighandler_tests on arm64 arch/arm64/kernel/signal.c | 95 +++++++++++++--- tools/testing/selftests/mm/Makefile | 8 +- tools/testing/selftests/mm/pkey-arm64.h | 1 + tools/testing/selftests/mm/pkey-x86.h | 2 + .../selftests/mm/pkey_sighandler_tests.c | 101 +++++++++++++----- 5 files changed, 162 insertions(+), 45 deletions(-) -- 2.43.0

9 months, 1 week

4
18
0 0

[PATCH bpf-next/net 0/5] bpf: Add mptcp_subflow bpf_iter support

by Matthieu Baerts (NGI0)

Here is a series from Geliang, adding mptcp_subflow bpf_iter support. We are working on extending MPTCP with BPF, e.g. to control the path manager -- in charge of the creation, deletion, and announcements of subflows (paths) -- and the packet scheduler -- in charge of selecting which available path the next data will be sent to. These extensions need to iterate over the list of subflows attached to an MPTCP connection, and do some specific actions via some new kfunc that will be added later on. This preparation work is split in different patches: - Patch 1: register some "basic" MPTCP kfunc. - Patch 2: add mptcp_subflow bpf_iter support. Note that previous versions of this single patch have already been shared to the BPF mailing list. The changelog has been kept with a comment, but the version number has been reset to avoid confusions. - Patch 3: add kfunc to make sure the msk is valid - Patch 4: add more MPTCP endpoints in the selftests, in order to create more than 2 subflows. - Patch 5: add a very simple test validating mptcp_subflow bpf_iter support. This test could be written without the new bpf_iter, but it is there only to make sure this specific feature works as expected. Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Geliang Tang (5): bpf: Register mptcp common kfunc set bpf: Add mptcp_subflow bpf_iter bpf: Acquire and release mptcp socket selftests/bpf: More endpoints for endpoint_init selftests/bpf: Add mptcp_subflow bpf_iter subtest net/mptcp/bpf.c | 104 ++++++++++++++++- tools/testing/selftests/bpf/bpf_experimental.h | 8 ++ tools/testing/selftests/bpf/prog_tests/mptcp.c | 129 ++++++++++++++++++++- tools/testing/selftests/bpf/progs/mptcp_bpf.h | 10 ++ .../testing/selftests/bpf/progs/mptcp_bpf_iters.c | 64 ++++++++++ 5 files changed, 308 insertions(+), 7 deletions(-) --- base-commit: 141b4d6a8049cecdc8124f87e044b83a9e80730d change-id: 20241108-bpf-next-net-mptcp-bpf_iter-subflows-027f6d87770e Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

9 months, 1 week

3
9
0 0

[PATCH v7 00/13] iommufd: Add vIOMMU infrastructure (Part-1)

by Nicolin Chen

This series introduces a new vIOMMU infrastructure and related ioctls. IOMMUFD has been using the HWPT infrastructure for all cases, including a nested IO page table support. Yet, there're limitations for an HWPT-based structure to support some advanced HW-accelerated features, such as CMDQV on NVIDIA Grace, and HW-accelerated vIOMMU on AMD. Even for a multi-IOMMU environment, it is not straightforward for nested HWPTs to share the same parent HWPT (stage-2 IO pagetable), with the HWPT infrastructure alone: a parent HWPT typically hold one stage-2 IO pagetable and tag it with only one ID in the cache entries. When sharing one large stage-2 IO pagetable across physical IOMMU instances, that one ID may not always be available across all the IOMMU instances. In other word, it's ideal for SW to have a different container for the stage-2 IO pagetable so it can hold another ID that's available. And this container will be able to hold some advanced feature too. For this "different container", add vIOMMU, an additional layer to hold extra virtualization information: _______________________________________________________________________ | iommufd (with vIOMMU) | | _____________ | | | | | | |----------------| vIOMMU | | | | ______ | | _____________ ________ | | | | | | | | | | | | | | | IOAS |<---|(HWPT_PAGING)|<---| HWPT_NESTED |<--| DEVICE | | | | |______| |_____________| |_____________| |________| | | | | | | | | |______|________|______________|__________________|_______________|_____| | | | | | ______v_____ | ______v_____ ______v_____ ___v__ | struct | | PFN | (paging) | | (nested) | |struct| |iommu_device| |------>|iommu_domain|<----|iommu_domain|<----|device| |____________| storage|____________| |____________| |______| The vIOMMU object should be seen as a slice of a physical IOMMU instance that is passed to or shared with a VM. That can be some HW/SW resources: - Security namespace for guest owned ID, e.g. guest-controlled cache tags - Non-device-affiliated event reporting, e.g. invalidation queue errors - Access to a sharable nesting parent pagetable across physical IOMMUs - Virtualization of various platforms IDs, e.g. RIDs and others - Delivery of paravirtualized invalidation - Direct assigned invalidation queues - Direct assigned interrupts On a multi-IOMMU system, the vIOMMU object must be instanced to the number of the physical IOMMUs that have a slice passed to (via device) a guest VM, while being able to hold the shareable parent HWPT. Each vIOMMU then just needs to allocate its own individual ID to tag its own cache: ---------------------------- ---------------- | | paging_hwpt0 | | hwpt_nested0 |--->| viommu0 ------------------ ---------------- | | IDx | ---------------------------- ---------------------------- ---------------- | | paging_hwpt0 | | hwpt_nested1 |--->| viommu1 ------------------ ---------------- | | IDy | ---------------------------- As an initial part-1, add IOMMUFD_CMD_VIOMMU_ALLOC ioctl for an allocation only. More vIOMMU-based structs and ioctls will be introduced in the follow-up series to support vDEVICE, vIRQ (vEVENT) and vQUEUE objects. Although we repurposed the vIOMMU object from an earlier RFC, just for a referece: https://lore.kernel.org/all/cover.1712978212.git.nicolinc@nvidia.com/ This series is on Github: https://github.com/nicolinc/iommufd/commits/iommufd_viommu_p1-v7 (QEMU branch for testing will be provided in Jason's nesting series) Changelog v7 * Added "Reviewed-by" from Jason * Dropped "select IOMMUFD_DRIVER_CORE" in Kconfig * Decoupled IOMMUFD_DRIVER from IOMMUFD_DRIVER_CORE * Moved vIOMMU negative tests out of FIXTURE_SETUP to a TEST_F * Dropped the "flags" check in iommufd_viommu_alloc_hwpt_nested * Added the kdoc for "flags" in iommufd_viommu_alloc_hwpt_nested v6 https://lore.kernel.org/all/cover.1730313237.git.nicolinc@nvidia.com/ * Improved comment lines * Added a TEST_F for IO page fault * Fixed indentations in iommufd.rst * Revised kdoc of the viommu_alloc op * Added "Reviewed-by" from Kevin and Jason * Passed in "flags" to ->alloc_domain_nested * Renamed "free" op to "destroy" in viommu_ops * Skipped SMMUv3 driver changes (to post in a separate series) * Fixed "flags" validation in iommufd_viommu_alloc_hwpt_nested * Added CONFIG_IOMMUFD_DRIVER_CORE for sharing between iommufd core and IOMMU dirvers * Replaced iommufd_verify_unfinalized_object with xa_cmpxchg in iommufd_object_finalize/abort functions v5 https://lore.kernel.org/all/cover.1729897352.git.nicolinc@nvidia.com/ * Added "Reviewed-by" from Kevin * Reworked iommufd_viommu_alloc helper * Revised the uAPI kdoc for vIOMMU object * Revised comments for pluggable iommu_dev * Added a couple of cleanup patches for selftest * Renamed domain_alloc_nested op to alloc_domain_nested * Updated a few commit messages to reflect the latest series * Renamed iommufd_hwpt_nested_alloc_for_viommu to iommufd_viommu_alloc_hwpt_nested, and added flag validation v4 https://lore.kernel.org/all/cover.1729553811.git.nicolinc@nvidia.com/ * Added "Reviewed-by" from Jason * Dropped IOMMU_VIOMMU_TYPE_DEFAULT support * Dropped iommufd_object_alloc_elm renamings * Renamed iommufd's viommu_api.c to driver.c * Reworked iommufd_viommu_alloc helper * Added a separate iommufd_hwpt_nested_alloc_for_viommu function for hwpt_nested allocations on a vIOMMU, and added comparison between viommu->iommu_dev->ops and dev_iommu_ops(idev->dev) * Replaced s2_parent with vsmmu in arm_smmu_nested_domain * Replaced domain_alloc_user in iommu_ops with domain_alloc_nested in viommu_ops * Replaced wait_queue_head_t with a completion, to delay the unplug of mock_iommu_dev * Corrected documentation graph that was missing struct iommu_device * Added an iommufd_verify_unfinalized_object helper to verify driver- allocated vIOMMU/vDEVICE objects * Added missing test cases for TEST_LENGTH and fail_nth v3 https://lore.kernel.org/all/cover.1728491453.git.nicolinc@nvidia.com/ * Rebased on top of Jason's nesting v3 series https://lore.kernel.org/all/0-v3-e2e16cd7467f+2a6a1-smmuv3_nesting_jgg@nvid… * Split the series into smaller parts * Added Jason's Reviewed-by * Added back viommu->iommu_dev * Added support for driver-allocated vIOMMU v.s. core-allocated * Dropped arm_smmu_cache_invalidate_user * Added an iommufd_test_wait_for_users() in selftest * Reworked test code to make viommu an individual FIXTURE * Added missing TEST_LENGTH case for the new ioctl command v2 https://lore.kernel.org/all/cover.1724776335.git.nicolinc@nvidia.com/ * Limited vdev_id to one per idev * Added a rw_sem to protect the vdev_id list * Reworked driver-level APIs with proper lockings * Added a new viommu_api file for IOMMUFD_DRIVER config * Dropped useless iommu_dev point from the viommu structure * Added missing index numnbers to new types in the uAPI header * Dropped IOMMU_VIOMMU_INVALIDATE uAPI; Instead, reuse the HWPT one * Reworked mock_viommu_cache_invalidate() using the new iommu helper * Reordered details of set/unset_vdev_id handlers for proper lockings v1 https://lore.kernel.org/all/cover.1723061377.git.nicolinc@nvidia.com/ Thanks! Nicolin Nicolin Chen (13): iommufd: Move struct iommufd_object to public iommufd header iommufd: Move _iommufd_object_alloc helper to a sharable file iommufd: Introduce IOMMUFD_OBJ_VIOMMU and its related struct iommufd: Verify object in iommufd_object_finalize/abort() iommufd/viommu: Add IOMMU_VIOMMU_ALLOC ioctl iommufd: Add alloc_domain_nested op to iommufd_viommu_ops iommufd: Allow pt_id to carry viommu_id for IOMMU_HWPT_ALLOC iommufd/selftest: Add container_of helpers iommufd/selftest: Prepare for mock_viommu_alloc_domain_nested() iommufd/selftest: Add refcount to mock_iommu_device iommufd/selftest: Add IOMMU_VIOMMU_TYPE_SELFTEST iommufd/selftest: Add IOMMU_VIOMMU_ALLOC test coverage Documentation: userspace-api: iommufd: Update vIOMMU drivers/iommu/iommufd/Kconfig | 4 + drivers/iommu/iommufd/Makefile | 4 +- drivers/iommu/iommufd/iommufd_private.h | 33 +-- drivers/iommu/iommufd/iommufd_test.h | 2 + include/linux/iommu.h | 14 + include/linux/iommufd.h | 86 ++++++ include/uapi/linux/iommufd.h | 54 +++- tools/testing/selftests/iommu/iommufd_utils.h | 28 ++ drivers/iommu/iommufd/driver.c | 40 +++ drivers/iommu/iommufd/hw_pagetable.c | 73 ++++- drivers/iommu/iommufd/main.c | 54 ++-- drivers/iommu/iommufd/selftest.c | 266 +++++++++++++----- drivers/iommu/iommufd/viommu.c | 81 ++++++ tools/testing/selftests/iommu/iommufd.c | 137 +++++++++ .../selftests/iommu/iommufd_fail_nth.c | 11 + Documentation/userspace-api/iommufd.rst | 69 ++++- 16 files changed, 804 insertions(+), 152 deletions(-) create mode 100644 drivers/iommu/iommufd/driver.c create mode 100644 drivers/iommu/iommufd/viommu.c base-commit: 0bcceb1f51c77f6b98a7aab00847ed340bf36e35 -- 2.43.0

9 months, 1 week

4
28
0 0

[PATCHv2 net] selftests: wireguard: load nf_conntrack if it's not present

by Hangbin Liu

Some distros may not load nf_conntrack by default, which will cause subsequent nf_conntrack settings to fail. Let's load this module if it's not loaded by default. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Hangbin Liu <liuhangbin(a)gmail.com> --- v2: load the mode directly in case nf_conntrack is build in (Simon Horman) --- tools/testing/selftests/wireguard/netns.sh | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/wireguard/netns.sh b/tools/testing/selftests/wireguard/netns.sh index 405ff262ca93..fa4dd7eb5918 100755 --- a/tools/testing/selftests/wireguard/netns.sh +++ b/tools/testing/selftests/wireguard/netns.sh @@ -66,6 +66,7 @@ cleanup() { orig_message_cost="$(< /proc/sys/net/core/message_cost)" trap cleanup EXIT printf 0 > /proc/sys/net/core/message_cost +modprobe nf_conntrack ip netns del $netns0 2>/dev/null || true ip netns del $netns1 2>/dev/null || true -- 2.39.5 (Apple Git-154)

9 months, 1 week

3
2
0 0

[PATCH] selftests/livepatch: Check if CONFIG_LIVEPATCH is enabled

by Siddharth Menon

When CONFIG_LIVEPATCH is disabled, compilation fails due to the required structs from the livepatch header file being undefined. This checks for CONFIG_LIVEPATCH in order to verify that it is enabled before compiling livepatch self-tests. Reviewed-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Siddharth Menon <simeddon(a)gmail.com> --- tools/testing/selftests/livepatch/test_modules/Makefile | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/livepatch/test_modules/Makefile b/tools/testing/selftests/livepatch/test_modules/Makefile index e6e638c4bcba..b34b80544709 100644 --- a/tools/testing/selftests/livepatch/test_modules/Makefile +++ b/tools/testing/selftests/livepatch/test_modules/Makefile @@ -1,5 +1,6 @@ TESTMODS_DIR := $(realpath $(dir $(abspath $(lastword $(MAKEFILE_LIST))))) KDIR ?= /lib/modules/$(shell uname -r)/build +CONFIG_LIVEPATCH := $(shell cd $(KDIR) && scripts/config --state CONFIG_LIVEPATCH) obj-m += test_klp_atomic_replace.o \ test_klp_callbacks_busy.o \ @@ -13,10 +14,15 @@ obj-m += test_klp_atomic_replace.o \ test_klp_shadow_vars.o \ test_klp_syscall.o -# Ensure that KDIR exists, otherwise skip the compilation + +# Ensure that KDIR exists and CONFIG_LIVEPATCH is enabled, else skip compilation modules: ifneq ("$(wildcard $(KDIR))", "") +ifneq ($(filter y m,$(CONFIG_LIVEPATCH)),) $(Q)$(MAKE) -C $(KDIR) modules KBUILD_EXTMOD=$(TESTMODS_DIR) +else + $(warning CONFIG_LIVEPATCH is not enabled in the kernel config file.) +endif endif # Ensure that KDIR exists, otherwise skip the clean target -- 2.39.5

9 months, 1 week

4
3
0 0

[PATCH v2] selftests/powerpc: Remove the path after initialization.

by zhangjiao2

From: zhang jiao <zhangjiao2(a)cmss.chinamobile.com> If there were no anamolies noted, then we can simply remove the log file and return. Signed-off-by: zhang jiao <zhangjiao2(a)cmss.chinamobile.com> --- v1->v2: Remove the path after initialization. tools/testing/selftests/powerpc/mm/tlbie_test.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/powerpc/mm/tlbie_test.c b/tools/testing/selftests/powerpc/mm/tlbie_test.c index 48344a74b212..35f0098399cc 100644 --- a/tools/testing/selftests/powerpc/mm/tlbie_test.c +++ b/tools/testing/selftests/powerpc/mm/tlbie_test.c @@ -313,16 +313,16 @@ static inline void end_verification_log(unsigned int tid, unsigned nr_anamolies) fclose(f); - if (nr_anamolies == 0) { - remove(path); - return; - } - sprintf(logfile, logfilename, tid); strcpy(path, logdir); strcat(path, separator); strcat(path, logfile); + if (nr_anamolies == 0) { + remove(path); + return; + } + printf("Thread %02d chunk has %d corrupted words. For details check %s\n", tid, nr_anamolies, path); } -- 2.33.0

9 months, 1 week

3
2
0 0

[PATCH 1/5] selftests/powerpc: Lower run time of count_stcx_fail test

by Michael Ellerman

The count_stcx_fail test runs for close to or just over 2 minutes, which means it sometimes times out. That's overkill for a test that just demonstrates some PMU counters are working. Drop the 64 billion instruction case, to lower the runtime to ~30s. Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> --- tools/testing/selftests/powerpc/pmu/count_stcx_fail.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/tools/testing/selftests/powerpc/pmu/count_stcx_fail.c b/tools/testing/selftests/powerpc/pmu/count_stcx_fail.c index 2070a1e2b3a5..d8dd9a9c6c1b 100644 --- a/tools/testing/selftests/powerpc/pmu/count_stcx_fail.c +++ b/tools/testing/selftests/powerpc/pmu/count_stcx_fail.c @@ -144,9 +144,6 @@ static int test_body(void) /* Run for 16Bi instructions */ FAIL_IF(do_count_loop(events, 16000000000, overhead, true)); - /* Run for 64Bi instructions */ - FAIL_IF(do_count_loop(events, 64000000000, overhead, true)); - event_close(&events[0]); event_close(&events[1]); -- 2.47.0

9 months, 1 week

2
5
0 0

Nov:16:24

by Van. HR

Hello, I am a private investment consultant representing the interest of a multinational conglomerate that wishes to place funds into a trust management portfolio. Please indicate your interest for additional information. Regards, Van Collin.

9 months, 2 weeks

1
0
0 0

[PATCH net-next v23 1/7] mm: page_frag: add a test module for page_frag

by Yunsheng Lin

The testing is done by ensuring that the fragment allocated from a frag_frag_cache instance is pushed into a ptr_ring instance in a kthread binded to a specified cpu, and a kthread binded to a specified cpu will pop the fragment from the ptr_ring and free the fragment. CC: Andrew Morton <akpm(a)linux-foundation.org> CC: Alexander Duyck <alexander.duyck(a)gmail.com> CC: Linux-MM <linux-mm(a)kvack.org> Signed-off-by: Yunsheng Lin <linyunsheng(a)huawei.com> Reviewed-by: Alexander Duyck <alexanderduyck(a)fb.com> --- tools/testing/selftests/mm/Makefile | 3 + tools/testing/selftests/mm/page_frag/Makefile | 18 ++ .../selftests/mm/page_frag/page_frag_test.c | 198 ++++++++++++++++++ tools/testing/selftests/mm/run_vmtests.sh | 8 + tools/testing/selftests/mm/test_page_frag.sh | 175 ++++++++++++++++ 5 files changed, 402 insertions(+) create mode 100644 tools/testing/selftests/mm/page_frag/Makefile create mode 100644 tools/testing/selftests/mm/page_frag/page_frag_test.c create mode 100755 tools/testing/selftests/mm/test_page_frag.sh diff --git a/tools/testing/selftests/mm/Makefile b/tools/testing/selftests/mm/Makefile index 02e1204971b0..acec529baaca 100644 --- a/tools/testing/selftests/mm/Makefile +++ b/tools/testing/selftests/mm/Makefile @@ -36,6 +36,8 @@ MAKEFLAGS += --no-builtin-rules CFLAGS = -Wall -I $(top_srcdir) $(EXTRA_CFLAGS) $(KHDR_INCLUDES) $(TOOLS_INCLUDES) LDLIBS = -lrt -lpthread -lm +TEST_GEN_MODS_DIR := page_frag + TEST_GEN_FILES = cow TEST_GEN_FILES += compaction_test TEST_GEN_FILES += gup_longterm @@ -126,6 +128,7 @@ TEST_FILES += test_hmm.sh TEST_FILES += va_high_addr_switch.sh TEST_FILES += charge_reserved_hugetlb.sh TEST_FILES += hugetlb_reparenting_test.sh +TEST_FILES += test_page_frag.sh # required by charge_reserved_hugetlb.sh TEST_FILES += write_hugetlb_memory.sh diff --git a/tools/testing/selftests/mm/page_frag/Makefile b/tools/testing/selftests/mm/page_frag/Makefile new file mode 100644 index 000000000000..58dda74d50a3 --- /dev/null +++ b/tools/testing/selftests/mm/page_frag/Makefile @@ -0,0 +1,18 @@ +PAGE_FRAG_TEST_DIR := $(realpath $(dir $(abspath $(lastword $(MAKEFILE_LIST))))) +KDIR ?= $(abspath $(PAGE_FRAG_TEST_DIR)/../../../../..) + +ifeq ($(V),1) +Q = +else +Q = @ +endif + +MODULES = page_frag_test.ko + +obj-m += page_frag_test.o + +all: + +$(Q)make -C $(KDIR) M=$(PAGE_FRAG_TEST_DIR) modules + +clean: + +$(Q)make -C $(KDIR) M=$(PAGE_FRAG_TEST_DIR) clean diff --git a/tools/testing/selftests/mm/page_frag/page_frag_test.c b/tools/testing/selftests/mm/page_frag/page_frag_test.c new file mode 100644 index 000000000000..912d97b99107 --- /dev/null +++ b/tools/testing/selftests/mm/page_frag/page_frag_test.c @@ -0,0 +1,198 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* + * Test module for page_frag cache + * + * Copyright (C) 2024 Yunsheng Lin <linyunsheng(a)huawei.com> + */ + +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/cpumask.h> +#include <linux/completion.h> +#include <linux/ptr_ring.h> +#include <linux/kthread.h> + +#define TEST_FAILED_PREFIX "page_frag_test failed: " + +static struct ptr_ring ptr_ring; +static int nr_objs = 512; +static atomic_t nthreads; +static struct completion wait; +static struct page_frag_cache test_nc; +static int test_popped; +static int test_pushed; +static bool force_exit; + +static int nr_test = 2000000; +module_param(nr_test, int, 0); +MODULE_PARM_DESC(nr_test, "number of iterations to test"); + +static bool test_align; +module_param(test_align, bool, 0); +MODULE_PARM_DESC(test_align, "use align API for testing"); + +static int test_alloc_len = 2048; +module_param(test_alloc_len, int, 0); +MODULE_PARM_DESC(test_alloc_len, "alloc len for testing"); + +static int test_push_cpu; +module_param(test_push_cpu, int, 0); +MODULE_PARM_DESC(test_push_cpu, "test cpu for pushing fragment"); + +static int test_pop_cpu; +module_param(test_pop_cpu, int, 0); +MODULE_PARM_DESC(test_pop_cpu, "test cpu for popping fragment"); + +static int page_frag_pop_thread(void *arg) +{ + struct ptr_ring *ring = arg; + + pr_info("page_frag pop test thread begins on cpu %d\n", + smp_processor_id()); + + while (test_popped < nr_test) { + void *obj = __ptr_ring_consume(ring); + + if (obj) { + test_popped++; + page_frag_free(obj); + } else { + if (force_exit) + break; + + cond_resched(); + } + } + + if (atomic_dec_and_test(&nthreads)) + complete(&wait); + + pr_info("page_frag pop test thread exits on cpu %d\n", + smp_processor_id()); + + return 0; +} + +static int page_frag_push_thread(void *arg) +{ + struct ptr_ring *ring = arg; + + pr_info("page_frag push test thread begins on cpu %d\n", + smp_processor_id()); + + while (test_pushed < nr_test && !force_exit) { + void *va; + int ret; + + if (test_align) { + va = page_frag_alloc_align(&test_nc, test_alloc_len, + GFP_KERNEL, SMP_CACHE_BYTES); + + if ((unsigned long)va & (SMP_CACHE_BYTES - 1)) { + force_exit = true; + WARN_ONCE(true, TEST_FAILED_PREFIX "unaligned va returned\n"); + } + } else { + va = page_frag_alloc(&test_nc, test_alloc_len, GFP_KERNEL); + } + + if (!va) + continue; + + ret = __ptr_ring_produce(ring, va); + if (ret) { + page_frag_free(va); + cond_resched(); + } else { + test_pushed++; + } + } + + pr_info("page_frag push test thread exits on cpu %d\n", + smp_processor_id()); + + if (atomic_dec_and_test(&nthreads)) + complete(&wait); + + return 0; +} + +static int __init page_frag_test_init(void) +{ + struct task_struct *tsk_push, *tsk_pop; + int last_pushed = 0, last_popped = 0; + ktime_t start; + u64 duration; + int ret; + + test_nc.va = NULL; + atomic_set(&nthreads, 2); + init_completion(&wait); + + if (test_alloc_len > PAGE_SIZE || test_alloc_len <= 0 || + !cpu_active(test_push_cpu) || !cpu_active(test_pop_cpu)) + return -EINVAL; + + ret = ptr_ring_init(&ptr_ring, nr_objs, GFP_KERNEL); + if (ret) + return ret; + + tsk_push = kthread_create_on_cpu(page_frag_push_thread, &ptr_ring, + test_push_cpu, "page_frag_push"); + if (IS_ERR(tsk_push)) + return PTR_ERR(tsk_push); + + tsk_pop = kthread_create_on_cpu(page_frag_pop_thread, &ptr_ring, + test_pop_cpu, "page_frag_pop"); + if (IS_ERR(tsk_pop)) { + kthread_stop(tsk_push); + return PTR_ERR(tsk_pop); + } + + start = ktime_get(); + wake_up_process(tsk_push); + wake_up_process(tsk_pop); + + pr_info("waiting for test to complete\n"); + + while (!wait_for_completion_timeout(&wait, msecs_to_jiffies(10000))) { + /* exit if there is no progress for push or pop size */ + if (last_pushed == test_pushed || last_popped == test_popped) { + WARN_ONCE(true, TEST_FAILED_PREFIX "no progress\n"); + force_exit = true; + continue; + } + + last_pushed = test_pushed; + last_popped = test_popped; + pr_info("page_frag_test progress: pushed = %d, popped = %d\n", + test_pushed, test_popped); + } + + if (force_exit) { + pr_err(TEST_FAILED_PREFIX "exit with error\n"); + goto out; + } + + duration = (u64)ktime_us_delta(ktime_get(), start); + pr_info("%d of iterations for %s testing took: %lluus\n", nr_test, + test_align ? "aligned" : "non-aligned", duration); + +out: + ptr_ring_cleanup(&ptr_ring, NULL); + page_frag_cache_drain(&test_nc); + + return -EAGAIN; +} + +static void __exit page_frag_test_exit(void) +{ +} + +module_init(page_frag_test_init); +module_exit(page_frag_test_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Yunsheng Lin <linyunsheng(a)huawei.com>"); +MODULE_DESCRIPTION("Test module for page_frag"); diff --git a/tools/testing/selftests/mm/run_vmtests.sh b/tools/testing/selftests/mm/run_vmtests.sh index c5797ad1d37b..2c5394584af4 100755 --- a/tools/testing/selftests/mm/run_vmtests.sh +++ b/tools/testing/selftests/mm/run_vmtests.sh @@ -75,6 +75,8 @@ separated by spaces: read-only VMAs - mdwe test prctl(PR_SET_MDWE, ...) +- page_frag + test handling of page fragment allocation and freeing example: ./run_vmtests.sh -t "hmm mmap ksm" EOF @@ -456,6 +458,12 @@ CATEGORY="mkdirty" run_test ./mkdirty CATEGORY="mdwe" run_test ./mdwe_test +CATEGORY="page_frag" run_test ./test_page_frag.sh smoke + +CATEGORY="page_frag" run_test ./test_page_frag.sh aligned + +CATEGORY="page_frag" run_test ./test_page_frag.sh nonaligned + echo "SUMMARY: PASS=${count_pass} SKIP=${count_skip} FAIL=${count_fail}" | tap_prefix echo "1..${count_total}" | tap_output diff --git a/tools/testing/selftests/mm/test_page_frag.sh b/tools/testing/selftests/mm/test_page_frag.sh new file mode 100755 index 000000000000..f55b105084cf --- /dev/null +++ b/tools/testing/selftests/mm/test_page_frag.sh @@ -0,0 +1,175 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (C) 2024 Yunsheng Lin <linyunsheng(a)huawei.com> +# Copyright (C) 2018 Uladzislau Rezki (Sony) <urezki(a)gmail.com> +# +# This is a test script for the kernel test driver to test the +# correctness and performance of page_frag's implementation. +# Therefore it is just a kernel module loader. You can specify +# and pass different parameters in order to: +# a) analyse performance of page fragment allocations; +# b) stressing and stability check of page_frag subsystem. + +DRIVER="./page_frag/page_frag_test.ko" +CPU_LIST=$(grep -m 2 processor /proc/cpuinfo | cut -d ' ' -f 2) +TEST_CPU_0=$(echo $CPU_LIST | awk '{print $1}') + +if [ $(echo $CPU_LIST | wc -w) -gt 1 ]; then + TEST_CPU_1=$(echo $CPU_LIST | awk '{print $2}') + NR_TEST=100000000 +else + TEST_CPU_1=$TEST_CPU_0 + NR_TEST=1000000 +fi + +# 1 if fails +exitcode=1 + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +check_test_failed_prefix() { + if dmesg | grep -q 'page_frag_test failed:';then + echo "page_frag_test failed, please check dmesg" + exit $exitcode + fi +} + +# +# Static templates for testing of page_frag APIs. +# Also it is possible to pass any supported parameters manually. +# +SMOKE_PARAM="test_push_cpu=$TEST_CPU_0 test_pop_cpu=$TEST_CPU_1" +NONALIGNED_PARAM="$SMOKE_PARAM test_alloc_len=75 nr_test=$NR_TEST" +ALIGNED_PARAM="$NONALIGNED_PARAM test_align=1" + +check_test_requirements() +{ + uid=$(id -u) + if [ $uid -ne 0 ]; then + echo "$0: Must be run as root" + exit $ksft_skip + fi + + if ! which insmod > /dev/null 2>&1; then + echo "$0: You need insmod installed" + exit $ksft_skip + fi + + if [ ! -f $DRIVER ]; then + echo "$0: You need to compile page_frag_test module" + exit $ksft_skip + fi +} + +run_nonaligned_check() +{ + echo "Run performance tests to evaluate how fast nonaligned alloc API is." + + insmod $DRIVER $NONALIGNED_PARAM > /dev/null 2>&1 +} + +run_aligned_check() +{ + echo "Run performance tests to evaluate how fast aligned alloc API is." + + insmod $DRIVER $ALIGNED_PARAM > /dev/null 2>&1 +} + +run_smoke_check() +{ + echo "Run smoke test." + + insmod $DRIVER $SMOKE_PARAM > /dev/null 2>&1 +} + +usage() +{ + echo -n "Usage: $0 [ aligned ] | [ nonaligned ] | | [ smoke ] | " + echo "manual parameters" + echo + echo "Valid tests and parameters:" + echo + modinfo $DRIVER + echo + echo "Example usage:" + echo + echo "# Shows help message" + echo "$0" + echo + echo "# Smoke testing" + echo "$0 smoke" + echo + echo "# Performance testing for nonaligned alloc API" + echo "$0 nonaligned" + echo + echo "# Performance testing for aligned alloc API" + echo "$0 aligned" + echo + exit 0 +} + +function validate_passed_args() +{ + VALID_ARGS=`modinfo $DRIVER | awk '/parm:/ {print $2}' | sed 's/:.*//'` + + # + # Something has been passed, check it. + # + for passed_arg in $@; do + key=${passed_arg//=*/} + valid=0 + + for valid_arg in $VALID_ARGS; do + if [[ $key = $valid_arg ]]; then + valid=1 + break + fi + done + + if [[ $valid -ne 1 ]]; then + echo "Error: key is not correct: ${key}" + exit $exitcode + fi + done +} + +function run_manual_check() +{ + # + # Validate passed parameters. If there is wrong one, + # the script exists and does not execute further. + # + validate_passed_args $@ + + echo "Run the test with following parameters: $@" + insmod $DRIVER $@ > /dev/null 2>&1 +} + +function run_test() +{ + if [ $# -eq 0 ]; then + usage + else + if [[ "$1" = "smoke" ]]; then + run_smoke_check + elif [[ "$1" = "nonaligned" ]]; then + run_nonaligned_check + elif [[ "$1" = "aligned" ]]; then + run_aligned_check + else + run_manual_check $@ + fi + fi + + check_test_failed_prefix + + echo "Done." + echo "Check the kernel ring buffer to see the summary." +} + +check_test_requirements +run_test $@ + +exit 0 -- 2.33.0

9 months, 2 weeks

4
6
0 0

[PATCH v1] selftest/mm: remove seal_elf

by jeffxu＠chromium.org

From: Jeff Xu <jeffxu(a)chromium.org> Remove seal_elf, which is a demo of mseal, we no longer need this. Signed-off-by: Jeff Xu <jeffxu(a)chromium.org> --- tools/testing/selftests/mm/.gitignore | 1 - tools/testing/selftests/mm/Makefile | 1 - tools/testing/selftests/mm/seal_elf.c | 137 -------------------------- 3 files changed, 139 deletions(-) delete mode 100644 tools/testing/selftests/mm/seal_elf.c diff --git a/tools/testing/selftests/mm/.gitignore b/tools/testing/selftests/mm/.gitignore index 8f01f4da1c0d..6a273bdbc70b 100644 --- a/tools/testing/selftests/mm/.gitignore +++ b/tools/testing/selftests/mm/.gitignore @@ -49,7 +49,6 @@ va_high_addr_switch hugetlb_fault_after_madv hugetlb_madv_vs_map mseal_test -seal_elf droppable hugetlb_dio pkey_sighandler_tests_32 diff --git a/tools/testing/selftests/mm/Makefile b/tools/testing/selftests/mm/Makefile index 72ec4403032d..869b6a40f290 100644 --- a/tools/testing/selftests/mm/Makefile +++ b/tools/testing/selftests/mm/Makefile @@ -64,7 +64,6 @@ TEST_GEN_FILES += mrelease_test TEST_GEN_FILES += mremap_dontunmap TEST_GEN_FILES += mremap_test TEST_GEN_FILES += mseal_test -TEST_GEN_FILES += seal_elf TEST_GEN_FILES += on-fault-limit TEST_GEN_FILES += pagemap_ioctl TEST_GEN_FILES += thuge-gen diff --git a/tools/testing/selftests/mm/seal_elf.c b/tools/testing/selftests/mm/seal_elf.c deleted file mode 100644 index d9f8ba8d5050..000000000000 --- a/tools/testing/selftests/mm/seal_elf.c +++ /dev/null @@ -1,137 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#define _GNU_SOURCE -#include <sys/mman.h> -#include <stdint.h> -#include <asm-generic/unistd.h> -#include <string.h> -#include <sys/time.h> -#include <sys/resource.h> -#include <stdbool.h> -#include "../kselftest.h" -#include <syscall.h> -#include <errno.h> -#include <stdio.h> -#include <stdlib.h> -#include <fcntl.h> -#include <sys/ioctl.h> -#include <sys/vfs.h> -#include <sys/stat.h> -#include "mseal_helpers.h" - -/* - * define sys_xyx to call syscall directly. - */ -static int sys_mseal(void *start, size_t len) -{ - int sret; - - errno = 0; - sret = syscall(__NR_mseal, start, len, 0); - return sret; -} - -static inline int sys_mprotect(void *ptr, size_t size, unsigned long prot) -{ - int sret; - - errno = 0; - sret = syscall(__NR_mprotect, ptr, size, prot); - return sret; -} - -static bool seal_support(void) -{ - int ret; - void *ptr; - unsigned long page_size = getpagesize(); - - ptr = mmap(NULL, page_size, PROT_READ, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); - if (ptr == (void *) -1) - return false; - - ret = sys_mseal(ptr, page_size); - if (ret < 0) - return false; - - return true; -} - -const char somestr[4096] = {"READONLY"}; - -static void test_seal_elf(void) -{ - int ret; - FILE *maps; - char line[512]; - uintptr_t addr_start, addr_end; - char prot[5]; - char filename[256]; - unsigned long page_size = getpagesize(); - unsigned long long ptr = (unsigned long long) somestr; - char *somestr2 = (char *)somestr; - - /* - * Modify the protection of readonly somestr - */ - if (((unsigned long long)ptr % page_size) != 0) - ptr = (unsigned long long)ptr & ~(page_size - 1); - - ksft_print_msg("somestr = %s\n", somestr); - ksft_print_msg("change protection to rw\n"); - ret = sys_mprotect((void *)ptr, page_size, PROT_READ|PROT_WRITE); - FAIL_TEST_IF_FALSE(!ret); - *somestr2 = 'A'; - ksft_print_msg("somestr is modified to: %s\n", somestr); - ret = sys_mprotect((void *)ptr, page_size, PROT_READ); - FAIL_TEST_IF_FALSE(!ret); - - maps = fopen("/proc/self/maps", "r"); - FAIL_TEST_IF_FALSE(maps); - - /* - * apply sealing to elf binary - */ - while (fgets(line, sizeof(line), maps)) { - if (sscanf(line, "%lx-%lx %4s %*x %*x:%*x %*u %255[^\n]", - &addr_start, &addr_end, prot, filename) == 4) { - if (strlen(filename)) { - /* - * seal the mapping if read only. - */ - if (strstr(prot, "r-")) { - ret = sys_mseal((void *)addr_start, addr_end - addr_start); - FAIL_TEST_IF_FALSE(!ret); - ksft_print_msg("sealed: %lx-%lx %s %s\n", - addr_start, addr_end, prot, filename); - if ((uintptr_t) somestr >= addr_start && - (uintptr_t) somestr <= addr_end) - ksft_print_msg("mapping for somestr found\n"); - } - } - } - } - fclose(maps); - - ret = sys_mprotect((void *)ptr, page_size, PROT_READ | PROT_WRITE); - FAIL_TEST_IF_FALSE(ret < 0); - ksft_print_msg("somestr is sealed, mprotect is rejected\n"); - - REPORT_TEST_PASS(); -} - -int main(int argc, char **argv) -{ - bool test_seal = seal_support(); - - ksft_print_header(); - ksft_print_msg("pid=%d\n", getpid()); - - if (!test_seal) - ksft_exit_skip("sealing not supported, check CONFIG_64BIT\n"); - - ksft_set_plan(1); - - test_seal_elf(); - - ksft_finished(); -} -- 2.47.0.338.g60cca15819-goog

9 months, 2 weeks

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror November 2024