July 2023 - Linux-kselftest-mirror

[PATCH mm-unstable fix] mm: userfaultfd: check for start + len overflow in validate_range: fix

by Axel Rasmussen

This commit removed an extra check for zero-length ranges, and folded it into the common validate_range() helper used by all UFFD ioctls. It failed to notice though that UFFDIO_COPY *only* called validate_range on the dst range, not the src range. So removing this check actually let us proceed with zero-length source ranges, eventually hitting a BUG further down in the call stack. The correct fix seems clear: call validate_range() on the src range too. Other ioctls are not affected by this, as they only have one range, not two (src + dst). Reported-by: syzbot+42309678e0bc7b32f8e9(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=42309678e0bc7b32f8e9 Signed-off-by: Axel Rasmussen <axelrasmussen(a)google.com> --- fs/userfaultfd.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/userfaultfd.c b/fs/userfaultfd.c index 53a7220c4679..36d233759233 100644 --- a/fs/userfaultfd.c +++ b/fs/userfaultfd.c @@ -1759,6 +1759,9 @@ static int userfaultfd_copy(struct userfaultfd_ctx *ctx, sizeof(uffdio_copy)-sizeof(__s64))) goto out; + ret = validate_range(ctx->mm, uffdio_copy.src, uffdio_copy.len); + if (ret) + goto out; ret = validate_range(ctx->mm, uffdio_copy.dst, uffdio_copy.len); if (ret) goto out; -- 2.41.0.255.g8b1d071c50-goog

2 years

3
3
0 0

[PATCH v3 00/36] arm64/gcs: Provide support for GCS in userspace

by Mark Brown

The arm64 Guarded Control Stack (GCS) feature provides support for hardware protected stacks of return addresses, intended to provide hardening against return oriented programming (ROP) attacks and to make it easier to gather call stacks for applications such as profiling. When GCS is active a secondary stack called the Guarded Control Stack is maintained, protected with a memory attribute which means that it can only be written with specific GCS operations. When a BL is executed the value stored in LR is also pushed onto the GCS, and when a RET is executed the top of the GCS is popped and compared to LR with a fault being raised if the values do not match. GCS operations may only be performed on GCS pages, a data abort is generated if they are not. This series implements support for use of GCS by userspace, along with support for use of GCS within KVM guests. It does not enable use of GCS by either EL1 or EL2. Executables are started without GCS and must use a prctl() to enable it, it is expected that this will be done very early in application execution by the dynamic linker or other startup code. x86 has an equivalent feature called shadow stacks, this series depends on the x86 patches for generic memory management support for the new guarded/shadow stack page type and shares APIs as much as possible. As there has been extensive discussion with the wider community around the ABI for shadow stacks I have as far as practical kept implementation decisions close to those for x86, anticipating that review would lead to similar conclusions in the absence of strong reasoning for divergence. The main divergence I am concious of is that x86 allows shadow stack to be enabled and disabled repeatedly, freeing the shadow stack for the thread whenever disabled, while this implementation keeps the GCS allocated after disable but refuses to reenable it. This is to avoid races with things actively walking the GCS during a disable, we do anticipate that some systems will wish to disable GCS at runtime but are not aware of any demand for subsequently reenabling it. x86 uses an arch_prctl() to manage enable and disable, since only x86 and S/390 use arch_prctl() a generic prctl() was proposed[1] as part of a patch set for the equivalent RISC-V zisslpcfi feature which I initially adopted fairly directly but following review feedback has been reviewed quite a bit. There is an open issue with support for CRIU, on x86 this required the ability to set the GCS mode via ptrace. This series supports configuring mode bits other than enable/disable via ptrace but it needs to be confirmed if this is sufficient. There's a few bits where I'm not convinced with where I've placed things, in particular the GCS write operation is in the GCS header not in uaccess.h, I wasn't sure what was clearest there and am probably too close to the code to have a clear opinion. The reporting of GCS in /proc/PID/smaps is also a bit awkward. The series depends on the x86 shadow stack support: https://lore.kernel.org/lkml/20230227222957.24501-1-rick.p.edgecombe@intel.… I've rebased this onto v6.5-rc3 but not included it in the series in order to avoid confusion with Rick's work and cut down the size of the series, you can see the branch at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc.git arm64-gcs [1] https://lore.kernel.org/lkml/20230213045351.3945824-1-debug@rivosinc.com/ Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Changes in v3: - Rebase onto v6.5-rc4. - Add a GCS barrier on context switch. - Add a GCS stress test. - Link to v2: https://lore.kernel.org/r/20230724-arm64-gcs-v2-0-dc2c1d44c2eb@kernel.org Changes in v2: - Rebase onto v6.5-rc3. - Rework prctl() interface to allow each bit to be locked independently. - map_shadow_stack() now places the cap token based on the size requested by the caller not the actual space allocated. - Mode changes other than enable via ptrace are now supported. - Expand test coverage. - Various smaller fixes and adjustments. - Link to v1: https://lore.kernel.org/r/20230716-arm64-gcs-v1-0-bf567f93bba6@kernel.org --- Mark Brown (36): prctl: arch-agnostic prctl for shadow stack arm64: Document boot requirements for Guarded Control Stacks arm64/gcs: Document the ABI for Guarded Control Stacks arm64/sysreg: Add new system registers for GCS arm64/sysreg: Add definitions for architected GCS caps arm64/gcs: Add manual encodings of GCS instructions arm64/gcs: Provide copy_to_user_gcs() arm64/cpufeature: Runtime detection of Guarded Control Stack (GCS) arm64/mm: Allocate PIE slots for EL0 guarded control stack mm: Define VM_SHADOW_STACK for arm64 when we support GCS arm64/mm: Map pages for guarded control stack KVM: arm64: Manage GCS registers for guests arm64/gcs: Allow GCS usage at EL0 and EL1 arm64/idreg: Add overrride for GCS arm64/hwcap: Add hwcap for GCS arm64/traps: Handle GCS exceptions arm64/mm: Handle GCS data aborts arm64/gcs: Context switch GCS state for EL0 arm64/gcs: Allocate a new GCS for threads with GCS enabled arm64/gcs: Implement shadow stack prctl() interface arm64/mm: Implement map_shadow_stack() arm64/signal: Set up and restore the GCS context for signal handlers arm64/signal: Expose GCS state in signal frames arm64/ptrace: Expose GCS via ptrace and core files arm64: Add Kconfig for Guarded Control Stack (GCS) kselftest/arm64: Verify the GCS hwcap kselftest/arm64: Add GCS as a detected feature in the signal tests kselftest/arm64: Add framework support for GCS to signal handling tests kselftest/arm64: Allow signals tests to specify an expected si_code kselftest/arm64: Always run signals tests with GCS enabled kselftest/arm64: Add very basic GCS test program kselftest/arm64: Add a GCS test program built with the system libc kselftest/arm64: Add test coverage for GCS mode locking selftests/arm64: Add GCS signal tests kselftest/arm64: Add a GCS stress test kselftest/arm64: Enable GCS for the FP stress tests Documentation/admin-guide/kernel-parameters.txt | 3 + Documentation/arch/arm64/booting.rst | 22 + Documentation/arch/arm64/elf_hwcaps.rst | 3 + Documentation/arch/arm64/gcs.rst | 225 +++++++++ Documentation/arch/arm64/index.rst | 1 + Documentation/filesystems/proc.rst | 2 +- arch/arm64/Kconfig | 19 + arch/arm64/include/asm/cpufeature.h | 6 + arch/arm64/include/asm/el2_setup.h | 17 + arch/arm64/include/asm/esr.h | 28 +- arch/arm64/include/asm/exception.h | 2 + arch/arm64/include/asm/gcs.h | 106 ++++ arch/arm64/include/asm/hwcap.h | 1 + arch/arm64/include/asm/kvm_arm.h | 4 +- arch/arm64/include/asm/kvm_host.h | 12 + arch/arm64/include/asm/pgtable-prot.h | 14 +- arch/arm64/include/asm/processor.h | 7 + arch/arm64/include/asm/sysreg.h | 20 + arch/arm64/include/asm/uaccess.h | 42 ++ arch/arm64/include/uapi/asm/hwcap.h | 1 + arch/arm64/include/uapi/asm/ptrace.h | 8 + arch/arm64/include/uapi/asm/sigcontext.h | 9 + arch/arm64/kernel/cpufeature.c | 19 + arch/arm64/kernel/cpuinfo.c | 1 + arch/arm64/kernel/entry-common.c | 23 + arch/arm64/kernel/idreg-override.c | 2 + arch/arm64/kernel/process.c | 85 ++++ arch/arm64/kernel/ptrace.c | 59 +++ arch/arm64/kernel/signal.c | 237 ++++++++- arch/arm64/kernel/traps.c | 11 + arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h | 17 + arch/arm64/kvm/sys_regs.c | 22 + arch/arm64/mm/Makefile | 1 + arch/arm64/mm/fault.c | 78 ++- arch/arm64/mm/gcs.c | 226 +++++++++ arch/arm64/mm/mmap.c | 17 +- arch/arm64/tools/cpucaps | 1 + arch/arm64/tools/sysreg | 55 +++ fs/proc/task_mmu.c | 3 + include/linux/mm.h | 16 +- include/linux/syscalls.h | 1 + include/uapi/asm-generic/unistd.h | 5 +- include/uapi/linux/elf.h | 1 + include/uapi/linux/prctl.h | 22 + kernel/sys.c | 30 ++ kernel/sys_ni.c | 1 + tools/testing/selftests/arm64/Makefile | 2 +- tools/testing/selftests/arm64/abi/hwcap.c | 19 + tools/testing/selftests/arm64/fp/assembler.h | 15 + tools/testing/selftests/arm64/fp/fpsimd-test.S | 2 + tools/testing/selftests/arm64/fp/sve-test.S | 2 + tools/testing/selftests/arm64/fp/za-test.S | 2 + tools/testing/selftests/arm64/fp/zt-test.S | 2 + tools/testing/selftests/arm64/gcs/.gitignore | 5 + tools/testing/selftests/arm64/gcs/Makefile | 23 + tools/testing/selftests/arm64/gcs/asm-offsets.h | 0 tools/testing/selftests/arm64/gcs/basic-gcs.c | 351 ++++++++++++++ tools/testing/selftests/arm64/gcs/gcs-locking.c | 200 ++++++++ .../selftests/arm64/gcs/gcs-stress-thread.S | 311 ++++++++++++ tools/testing/selftests/arm64/gcs/gcs-stress.c | 532 +++++++++++++++++++++ tools/testing/selftests/arm64/gcs/gcs-util.h | 87 ++++ tools/testing/selftests/arm64/gcs/libc-gcs.c | 372 ++++++++++++++ tools/testing/selftests/arm64/signal/.gitignore | 1 + .../testing/selftests/arm64/signal/test_signals.c | 17 +- .../testing/selftests/arm64/signal/test_signals.h | 6 + .../selftests/arm64/signal/test_signals_utils.c | 32 +- .../selftests/arm64/signal/test_signals_utils.h | 39 ++ .../arm64/signal/testcases/gcs_exception_fault.c | 59 +++ .../selftests/arm64/signal/testcases/gcs_frame.c | 78 +++ .../arm64/signal/testcases/gcs_write_fault.c | 67 +++ .../selftests/arm64/signal/testcases/testcases.c | 7 + .../selftests/arm64/signal/testcases/testcases.h | 1 + 72 files changed, 3683 insertions(+), 34 deletions(-) --- base-commit: 730a197c555893dfad0deebcace710d5c7425ba5 change-id: 20230303-arm64-gcs-e311ab0d8729 Best regards, -- Mark Brown <broonie(a)kernel.org>

2 years

5
63
0 0

[PATCH v6 00/13] RISCV: Add KVM_GET_REG_LIST API

by Haibo Xu

KVM_GET_REG_LIST will dump all register IDs that are available to KVM_GET/SET_ONE_REG and It's very useful to identify some platform regression issue during VM migration. Patch 1-7 re-structured the get-reg-list test in aarch64 to make some of the code as common test framework that can be shared by riscv. Patch 8 move reject_set check logic to a function so as to check for different errno for different registers. Patch 9 move finalize_vcpu back to run_test so that riscv can implement its specific operation. Patch 10 change to do the get/set operation only on present-blessed list. Patch 11 add the skip_set facilities so that riscv can skip set operation on some registers. Patch 12 enabled the KVM_GET_REG_LIST API in riscv. patch 13 added the corresponding kselftest for checking possible register regressions. The get-reg-list kvm selftest was ported from aarch64 and tested with Linux v6.5-rc3 on a Qemu riscv64 virt machine. --- Changed since v5: * Rebase to v6.5-rc3 * Minor fix for Andrew's comments Andrew Jones (7): KVM: arm64: selftests: Replace str_with_index with strdup_printf KVM: arm64: selftests: Drop SVE cap check in print_reg KVM: arm64: selftests: Remove print_reg's dependency on vcpu_config KVM: arm64: selftests: Rename vcpu_config and add to kvm_util.h KVM: arm64: selftests: Delete core_reg_fixup KVM: arm64: selftests: Split get-reg-list test code KVM: arm64: selftests: Finish generalizing get-reg-list Haibo Xu (6): KVM: arm64: selftests: Move reject_set check logic to a function KVM: arm64: selftests: Move finalize_vcpu back to run_test KVM: selftests: Only do get/set tests on present blessed list KVM: selftests: Add skip_set facility to get_reg_list test KVM: riscv: Add KVM_GET_REG_LIST API support KVM: riscv: selftests: Add get-reg-list test Documentation/virt/kvm/api.rst | 2 +- arch/riscv/kvm/vcpu.c | 375 +++++++++ tools/testing/selftests/kvm/Makefile | 13 +- .../selftests/kvm/aarch64/get-reg-list.c | 554 ++----------- tools/testing/selftests/kvm/get-reg-list.c | 401 +++++++++ .../selftests/kvm/include/kvm_util_base.h | 21 + .../selftests/kvm/include/riscv/processor.h | 3 + .../testing/selftests/kvm/include/test_util.h | 2 + tools/testing/selftests/kvm/lib/test_util.c | 15 + .../selftests/kvm/riscv/get-reg-list.c | 780 ++++++++++++++++++ 10 files changed, 1670 insertions(+), 496 deletions(-) create mode 100644 tools/testing/selftests/kvm/get-reg-list.c create mode 100644 tools/testing/selftests/kvm/riscv/get-reg-list.c -- 2.34.1

2 years

5
22
0 0

[PATCH 0/2] x86/BPF: Add new BPF helper call bpf_rdtsc

by Tero Kristo

Hello, This patch series adds a new x86 arch specific BPF helper, bpf_rdtsc() which can be used for reading the hardware time stamp counter (TSC.) Currently the same counter is directly accessible from userspace (using RDTSC instruction), and kernel space using various rdtsc_*() APIs, however eBPF lacks the support. The main usage for the TSC counter is for various profiling and timing purposes, getting accurate cycle counter values. The counter can be currently read from BPF programs by using the existing perf subsystem services (bpf_perf_event_read()), however its usage is cumbersome at best. Additionally, the perf subsystem provides relative value only for the counter, but absolute values are desired by some use cases like Wult [1]. The absolute value of TSC can be read with BPF programs currently via some kprobe / bpf_core_read() magic (see [2], [3], [4] for example), but this relies on accessing kernel internals and is not stable API, and is pretty cumbersome. Thus, this patch proposes a new arch x86 specific BPF helper to avoid the above issues. -Tero [1] https://github.com/intel/wult [2] https://github.com/intel/wult/blob/c92237c95b898498faf41e6644983102d1fe5156… [3] https://github.com/intel/wult/blob/c92237c95b898498faf41e6644983102d1fe5156… [4] https://github.com/intel/wult/blob/c92237c95b898498faf41e6644983102d1fe5156…

2 years

4
16
0 0

[PATCH 0/2] v2: F_OFD_GETLK extension to read lock info

by Stas Sergeev

This extension allows to use F_UNLCK on query, which currently returns EINVAL. Instead it can be used to query the locks on a particular fd - something that is not currently possible. The basic idea is that on F_OFD_GETLK, F_UNLCK would "conflict" with (or query) any types of the lock on the same fd, and ignore any locks on other fds. Use-cases: 1. CRIU-alike scenario when you want to read the locking info from an fd for the later reconstruction. This can now be done by setting l_start and l_len to 0 to cover entire file range, and do F_OFD_GETLK. In the loop you need to advance l_start past the returned lock ranges, to eventually collect all locked ranges. 2. Implementing the lock checking/enforcing policy. Say you want to implement an "auditor" module in your program, that checks that the I/O is done only after the proper locking is applied on a file region. In this case you need to know if the particular region is locked on that fd, and if so - with what type of the lock. If you would do that currently (without this extension) then you can only check for the write locks, and for that you need to probe the lock on your fd and then open the same file via another fd and probe there. That way you can identify the write lock on a particular fd, but such trick is non-atomic and complex. As for finding out the read lock on a particular fd - impossible. This extension allows to do such queries without any extra efforts. 3. Implementing the mandatory locking policy. Suppose you want to make a policy where the write lock inhibits any unlocked readers and writers. Currently you need to check if the write lock is present on some other fd, and if it is not there - allow the I/O operation. But because the write lock can appear at any moment, you need to do that under some global lock, which can be released only when the I/O operation is finished. With the proposed extension you can instead just check the write lock on your own fd first, and if it is there - allow the I/O operation on that fd without using any global lock. Only if there is no write lock on this fd, then you need to take global lock and check for a write lock on other fds. The second patch adds a test-case for OFD locks. It tests both the generic things and the proposed extension. The third patch is a proposed man page update for fcntl(2) (not for the linux source tree) Changes in v2: - Dropped the l_pid extension patch and updated test-case accordingly. Stas Sergeev (2): fs/locks: F_UNLCK extension for F_OFD_GETLK selftests: add OFD lock tests fs/locks.c | 23 +++- tools/testing/selftests/locking/Makefile | 2 + tools/testing/selftests/locking/ofdlocks.c | 132 +++++++++++++++++++++ 3 files changed, 154 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/locking/ofdlocks.c CC: Jeff Layton <jlayton(a)kernel.org> CC: Chuck Lever <chuck.lever(a)oracle.com> CC: Alexander Viro <viro(a)zeniv.linux.org.uk> CC: Christian Brauner <brauner(a)kernel.org> CC: linux-fsdevel(a)vger.kernel.org CC: linux-kernel(a)vger.kernel.org CC: Shuah Khan <shuah(a)kernel.org> CC: linux-kselftest(a)vger.kernel.org CC: linux-api(a)vger.kernel.org -- 2.39.2

2 years

6
15
0 0

[PATCH 0/4] RSEQ selftests updates

by Mathieu Desnoyers

Hi, You will find in this series updates to the rseq selftests, mainly bringing fixes from librseq project back into the RSEQ selftests. Thanks, Mathieu Mathieu Desnoyers (4): selftests/rseq: Fix CID_ID typo in Makefile selftests/rseq: Implement rseq_unqual_scalar_typeof selftests/rseq: Fix arm64 buggy load-acquire/store-release macros selftests/rseq: Use rseq_unqual_scalar_typeof in macros tools/testing/selftests/rseq/Makefile | 2 +- tools/testing/selftests/rseq/compiler.h | 26 ++++++++++ tools/testing/selftests/rseq/rseq-arm.h | 4 +- tools/testing/selftests/rseq/rseq-arm64.h | 58 ++++++++++++----------- tools/testing/selftests/rseq/rseq-mips.h | 4 +- tools/testing/selftests/rseq/rseq-ppc.h | 4 +- tools/testing/selftests/rseq/rseq-riscv.h | 6 +-- tools/testing/selftests/rseq/rseq-s390.h | 4 +- tools/testing/selftests/rseq/rseq-x86.h | 4 +- 9 files changed, 70 insertions(+), 42 deletions(-) -- 2.25.1

2 years

2
8
0 0

[PATCH v2 1/2] selftests: mm: ksm: Fix incorrect evaluation of parameter

by Ayush Jain

A missing break in kms_tests leads to kselftest hang when the parameter -s is used. In current code flow because of missing break in -s, -t parses args spilled from -s and as -t accepts only valid values as 0,1 so any arg in -s >1 or <0, gets in ksm_test failure This went undetected since, before the addition of option -t, the next case -M would immediately break out of the switch statement but that is no longer the case Add the missing break statement. ----Before---- ./ksm_tests -H -s 100 Invalid merge type ----After---- ./ksm_tests -H -s 100 Number of normal pages: 0 Number of huge pages: 50 Total size: 100 MiB Total time: 0.401732682 s Average speed: 248.922 MiB/s Fixes: 07115fcc15b4 ("selftests/mm: add new selftests for KSM") Signed-off-by: Ayush Jain <ayush.jain3(a)amd.com> Reviewed-by: David Hildenbrand <david(a)redhat.com> --- v1 -> v2 collect Reviewed-by from David Updated Fixes tag from commit 9e7cb94ca218 to 07115fcc15b4 tools/testing/selftests/mm/ksm_tests.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/mm/ksm_tests.c b/tools/testing/selftests/mm/ksm_tests.c index 435acebdc325..380b691d3eb9 100644 --- a/tools/testing/selftests/mm/ksm_tests.c +++ b/tools/testing/selftests/mm/ksm_tests.c @@ -831,6 +831,7 @@ int main(int argc, char *argv[]) printf("Size must be greater than 0\n"); return KSFT_FAIL; } + break; case 't': { int tmp = atoi(optarg); -- 2.34.1

2 years

2
2
0 0

[PATCH bpf-next v6 0/8] Add SO_REUSEPORT support for TC bpf_sk_assign

by Lorenz Bauer

We want to replace iptables TPROXY with a BPF program at TC ingress. To make this work in all cases we need to assign a SO_REUSEPORT socket to an skb, which is currently prohibited. This series adds support for such sockets to bpf_sk_assing. I did some refactoring to cut down on the amount of duplicate code. The key to this is to use INDIRECT_CALL in the reuseport helpers. To show that this approach is not just beneficial to TC sk_assign I removed duplicate code for bpf_sk_lookup as well. Joint work with Daniel Borkmann. Signed-off-by: Lorenz Bauer <lmb(a)isovalent.com> --- Changes in v6: - Reject unhashed UDP sockets in bpf_sk_assign to avoid ref leak - Link to v5: https://lore.kernel.org/r/20230613-so-reuseport-v5-0-f6686a0dbce0@isovalent… Changes in v5: - Drop reuse_sk == sk check in inet[6]_steal_stock (Kuniyuki) - Link to v4: https://lore.kernel.org/r/20230613-so-reuseport-v4-0-4ece76708bba@isovalent… Changes in v4: - WARN_ON_ONCE if reuseport socket is refcounted (Kuniyuki) - Use inet[6]_ehashfn_t to shorten function declarations (Kuniyuki) - Shuffle documentation patch around (Kuniyuki) - Update commit message to explain why IPv6 needs EXPORT_SYMBOL - Link to v3: https://lore.kernel.org/r/20230613-so-reuseport-v3-0-907b4cbb7b99@isovalent… Changes in v3: - Fix warning re udp_ehashfn and udp6_ehashfn (Simon) - Return higher scoring connected UDP reuseport sockets (Kuniyuki) - Fix ipv6 module builds - Link to v2: https://lore.kernel.org/r/20230613-so-reuseport-v2-0-b7c69a342613@isovalent… Changes in v2: - Correct commit abbrev length (Kuniyuki) - Reduce duplication (Kuniyuki) - Add checks on sk_state (Martin) - Split exporting inet[6]_lookup_reuseport into separate patch (Eric) --- Daniel Borkmann (1): selftests/bpf: Test that SO_REUSEPORT can be used with sk_assign helper Lorenz Bauer (7): udp: re-score reuseport groups when connected sockets are present bpf: reject unhashed sockets in bpf_sk_assign net: export inet_lookup_reuseport and inet6_lookup_reuseport net: remove duplicate reuseport_lookup functions net: document inet[6]_lookup_reuseport sk_state requirements net: remove duplicate sk_lookup helpers bpf, net: Support SO_REUSEPORT sockets with bpf_sk_assign include/net/inet6_hashtables.h | 81 ++++++++- include/net/inet_hashtables.h | 74 +++++++- include/net/sock.h | 7 +- include/uapi/linux/bpf.h | 3 - net/core/filter.c | 4 +- net/ipv4/inet_hashtables.c | 68 ++++--- net/ipv4/udp.c | 88 ++++----- net/ipv6/inet6_hashtables.c | 71 +++++--- net/ipv6/udp.c | 98 ++++------ tools/include/uapi/linux/bpf.h | 3 - tools/testing/selftests/bpf/network_helpers.c | 3 + .../selftests/bpf/prog_tests/assign_reuse.c | 197 +++++++++++++++++++++ .../selftests/bpf/progs/test_assign_reuse.c | 142 +++++++++++++++ 13 files changed, 660 insertions(+), 179 deletions(-) --- base-commit: 6f5a630d7c57cd79b1f526a95e757311e32d41e5 change-id: 20230613-so-reuseport-e92c526173ee Best regards, -- Lorenz Bauer <lmb(a)isovalent.com>

2 years

5
18
0 0

[PATCH v2 0/7] Split a folio to any lower order folios

by Zi Yan

From: Zi Yan <ziy(a)nvidia.com> Hi all, File folio supports any order and people would like to support flexible orders for anonymous folio[1] too. Currently, split_huge_page() only splits a huge page to order-0 pages, but splitting to orders higher than 0 is also useful. This patchset adds support for splitting a huge page to any lower order pages and uses it during folio truncate operations. The patchset is on top of mm-everything-2023-03-27-21-20. Changelog from v1 === 1. Changed split_page_memcg() and split_page_owner() parameter to use order 2. Used folio_test_pmd_mappable() in place of the equivalent code Details === * Patch 1 changes split_page_memcg() to use order instead of nr_pages * Patch 2 changes split_page_owner() to use order instead of nr_pages * Patch 3 and 4 add new_order parameter split_page_memcg() and split_page_owner() and prepare for upcoming changes. * Patch 5 adds split_huge_page_to_list_to_order() to split a huge page to any lower order. The original split_huge_page_to_list() calls split_huge_page_to_list_to_order() with new_order = 0. * Patch 6 uses split_huge_page_to_list_to_order() in large pagecache folio truncation instead of split the large folio all the way down to order-0. * Patch 7 adds a test API to debugfs and test cases in split_huge_page_test selftests. Comments and/or suggestions are welcome. [1] https://lore.kernel.org/linux-mm/Y%2FblF0GIunm+pRIC@casper.infradead.org/ Zi Yan (7): mm/memcg: use order instead of nr in split_page_memcg() mm/page_owner: use order instead of nr in split_page_owner() mm: memcg: make memcg huge page split support any order split. mm: page_owner: add support for splitting to any order in split page_owner. mm: thp: split huge page to any lower order pages. mm: truncate: split huge page cache page to a non-zero order if possible. mm: huge_memory: enable debugfs to split huge pages to any order. include/linux/huge_mm.h | 10 +- include/linux/memcontrol.h | 4 +- include/linux/page_owner.h | 10 +- mm/huge_memory.c | 137 ++++++++--- mm/memcontrol.c | 10 +- mm/page_alloc.c | 8 +- mm/page_owner.c | 10 +- mm/truncate.c | 21 +- .../selftests/mm/split_huge_page_test.c | 225 +++++++++++++++++- 9 files changed, 366 insertions(+), 69 deletions(-) -- 2.39.2

2 years

4
13
0 0

[net-next 0/2] seg6: add NEXT-C-SID support for SRv6 End.X behavior

by Andrea Mayer

In the Segment Routing (SR) architecture a list of instructions, called segments, can be added to the packet headers to influence the forwarding and processing of the packets in an SR enabled network. Considering the Segment Routing over IPv6 data plane (SRv6) [1], the segment identifiers (SIDs) are IPv6 addresses (128 bits) and the segment list (SID List) is carried in the Segment Routing Header (SRH). A segment may correspond to a "behavior" that is executed by a node when the packet is received. The Linux kernel currently supports a large subset of the behaviors described in [2] (e.g., End, End.X, End.T and so on). In some SRv6 scenarios, the number of segments carried by the SID List may increase dramatically, reducing the MTU (Maximum Transfer Unit) size and/or limiting the processing power of legacy hardware devices (due to longer IPv6 headers). The NEXT-C-SID mechanism [3] extends the SRv6 architecture by providing several ways to efficiently represent the SID List. By leveraging the NEXT-C-SID, is it possible to encode several SRv6 segments within a single 128 bit SID address (also referenced as Compressed SID Container). In this way, the length of the SID List can be drastically reduced. The NEXT-C-SID mechanism is built upon the "flavors" framework defined in [2]. This framework is already supported by the Linux SRv6 subsystem and is used to modify and/or extend a subset of existing behaviors. In this patchset, we extend the SRv6 End.X behavior in order to support the NEXT-C-SID mechanism. In details, the patchset is made of: - patch 1/2: add NEXT-C-SID support for SRv6 End.X behavior; - patch 2/2: add selftest for NEXT-C-SID in SRv6 End.X behavior. From the user space perspective, we do not need to change the iproute2 code to support the NEXT-C-SID flavor for the SRv6 End.X behavior. However, we will update the man page considering the NEXT-C-SID flavor applied to the SRv6 End.X behavior in a separate patch. Comments, improvements and suggestions are always appreciated. Thank you all, Andrea [1] - https://datatracker.ietf.org/doc/html/rfc8754 [2] - https://datatracker.ietf.org/doc/html/rfc8986 [3] - https://datatracker.ietf.org/doc/html/draft-ietf-spring-srv6-srh-compression Andrea Mayer (1): seg6: add NEXT-C-SID support for SRv6 End.X behavior Paolo Lungaroni (1): selftests: seg6: add selftest for NEXT-C-SID flavor in SRv6 End.X behavior net/ipv6/seg6_local.c | 108 +- tools/testing/selftests/net/Makefile | 1 + .../net/srv6_end_x_next_csid_l3vpn_test.sh | 1213 +++++++++++++++++ 3 files changed, 1302 insertions(+), 20 deletions(-) create mode 100755 tools/testing/selftests/net/srv6_end_x_next_csid_l3vpn_test.sh -- 2.20.1

2 years

4
9
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror July 2023