On Sun, 30 Mar 2025 23:58:18 +0000 (UTC), ci notify said:
... In gdb_check master-aarch64, after: | gdb patch https://patchwork.sourceware.org/patch/109371 ... Used configuration : *CI config* tcwg_gdb_check master-aarch64 *configure and test flags:* none, autodetected on aarch64-unknown-linux-gnu
If you have any questions regarding this report, please ask on linaro-toolchain@lists.linaro.org mailing list.
-----------------8<--------------------------8<--------------------------8<--------------------------
The information below contains the details of the failures, and the ways to reproduce a debug environment:
You can find the failure logs in *.log.1.xz files in
The full lists of regressions and improvements as well as configure and make commands are in
The list of [ignored] baseline and flaky failures are in
Current build : https://ci.linaro.org/job/tcwg_gdb_check--master-aarch64-precommit/4627/arti... Reference build : https://ci.linaro.org/job/tcwg_gdb_check--master-aarch64-build/2461/artifact...
In https://ci.linaro.org/job/tcwg_gdb_check--master-aarch64-precommit/4627/arti... it appears that the "info set" test started at line 1159 and failed with
FAIL: gdb.base/default.exp: info set (timeout)
at line 1533. Then a few more tests failed with timeout and finally over 100 tests failed with no obvious reason.
Was this caused by a problem on the CI machine?
On Tue, 1 Apr 2025 at 07:22, Martin Simmons qqxnjvamvxwx@dyxyl.com wrote:
On Sun, 30 Mar 2025 23:58:18 +0000 (UTC), ci notify said:
... In gdb_check master-aarch64, after: | gdb patch https://patchwork.sourceware.org/patch/109371 ... Used configuration : *CI config* tcwg_gdb_check master-aarch64 *configure and test flags:* none, autodetected on aarch64-unknown-linux-gnu
If you have any questions regarding this report, please ask on linaro-toolchain@lists.linaro.org mailing list.
-----------------8<--------------------------8<--------------------------8<--------------------------
The information below contains the details of the failures, and the ways to reproduce a debug environment:
You can find the failure logs in *.log.1.xz files in
The full lists of regressions and improvements as well as configure and make commands are in
The list of [ignored] baseline and flaky failures are in
Current build : https://ci.linaro.org/job/tcwg_gdb_check--master-aarch64-precommit/4627/arti... Reference build : https://ci.linaro.org/job/tcwg_gdb_check--master-aarch64-build/2461/artifact...
In https://ci.linaro.org/job/tcwg_gdb_check--master-aarch64-precommit/4627/arti... it appears that the "info set" test started at line 1159 and failed with
FAIL: gdb.base/default.exp: info set (timeout)
at line 1533. Then a few more tests failed with timeout and finally over 100 tests failed with no obvious reason.
Was this caused by a problem on the CI machine?
Hi, Thanks for the heads-up.
I'm not aware of any problem with that CI machine, although it's slightly slower than others we have.
We do have a system to detect "flaky" tests, so this should normally be excluded.
Maybe Thiago has already noticed random results with this particular test? Maybe it just needs an extended timeout factor to cope with large numbers of environment variables?
Thanks,
Christophe
linaro-toolchain mailing list -- linaro-toolchain@lists.linaro.org To unsubscribe send an email to linaro-toolchain-leave@lists.linaro.org
Hello,
Christophe Lyon christophe.lyon@linaro.org writes:
On Tue, 1 Apr 2025 at 07:22, Martin Simmons qqxnjvamvxwx@dyxyl.com wrote:
> On Sun, 30 Mar 2025 23:58:18 +0000 (UTC), ci notify said:
... In gdb_check master-aarch64, after: | gdb patch https://patchwork.sourceware.org/patch/109371 ... Used configuration : *CI config* tcwg_gdb_check master-aarch64 *configure and test flags:* none, autodetected on aarch64-unknown-linux-gnu
If you have any questions regarding this report, please ask on linaro-toolchain@lists.linaro.org mailing list.
-----------------8<--------------------------8<--------------------------8<--------------------------
The information below contains the details of the failures, and the ways to reproduce a debug environment:
You can find the failure logs in *.log.1.xz files in
https://ci.linaro.org/job/tcwg_gdb_check--master-aarch64-precommit/4627/arti... The full lists of regressions and improvements as well as configure and make commands are in
https://ci.linaro.org/job/tcwg_gdb_check--master-aarch64-precommit/4627/arti... The list of [ignored] baseline and flaky failures are in
https://ci.linaro.org/job/tcwg_gdb_check--master-aarch64-precommit/4627/arti...
Current build : https://ci.linaro.org/job/tcwg_gdb_check--master-aarch64-precommit/4627/arti... Reference build : https://ci.linaro.org/job/tcwg_gdb_check--master-aarch64-build/2461/artifact...
In https://ci.linaro.org/job/tcwg_gdb_check--master-aarch64-precommit/4627/arti... it appears that the "info set" test started at line 1159 and failed with
FAIL: gdb.base/default.exp: info set (timeout)
at line 1533. Then a few more tests failed with timeout and finally over 100 tests failed with no obvious reason.
Was this caused by a problem on the CI machine?
Hi, Thanks for the heads-up.
I'm not aware of any problem with that CI machine, although it's slightly slower than others we have.
We do have a system to detect "flaky" tests, so this should normally be excluded.
Maybe Thiago has already noticed random results with this particular test? Maybe it just needs an extended timeout factor to cope with large numbers of environment variables?
Yes, default.exp has a lot of flaky failures and they are normally discounted by our flaky detection system. The problem was that we recently lost history for the tcwg_gdb_check job and the system is still redetecting the flaky tests.
Sorry about the false regression report.
Hello,
Thiago Jung Bauermann thiago.bauermann@linaro.org writes:
Yes, default.exp has a lot of flaky failures and they are normally discounted by our flaky detection system. The problem was that we recently lost history for the tcwg_gdb_check job and the system is still redetecting the flaky tests.
Sorry about the false regression report.
I just posted a patch that will make default.exp reliably pass:
https://inbox.sourceware.org/gdb-patches/20250403162645.438432-1-thiago.baue...
linaro-toolchain@lists.linaro.org
-
Christophe Lyon -
Martin Simmons -
Thiago Jung Bauermann