try this patch problem is solve into 3.2 kernel

Mickael

On 04/26/2012 02:41 PM, Dan Donahue wrote:

Greetings,

I successfully built and booted Linux 3.1 for the beaglebone (TI am335x) using the 4.5.2 toolchain. I rebuild the same kernel using the same config with the 4.6.3 toolchain, but the board hangs at "Uncompressing Linux... done, booting the kernel."

I halt the beaglebone at the U-Boot prompt and have it download and run uImage from an NFS mounted RFS.

The Linaro 4.5.2 toolchain was installed in my Ubuntu 11.04 distro using aptitude.

The Linaro 4.6.3 toolchain binaries, downloaded via Launchpad, were installed into my own tools directory.

*4.5.2 INFO:*

./gcc-linaro-arm-linux-gnueabi-2012.01-20120125_linux/bin/arm-linux-gnueabi-gcc --version arm-linux-gnueabi-gcc (crosstool-NG linaro-1.13.1-2012.01-20120125 - Linaro GCC 2012.01) 4.6.3 20120105 (prerelease) Copyright (C) 2011 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Built with: *$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- uImage*

*4.6.3 INFO:*

./bin/arm-linux-gnueabi-gcc --version arm-linux-gnueabi-gcc (crosstool-NG linaro-1.13.1-2012.01-20120125 - Linaro GCC 2012.01) 4.6.3 20120105 (prerelease) Copyright (C) 2011 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Built with: *$ make ARCH=arm CROSS_COMPILE=<mytoolsdir>/gcc-linaro-arm-linux-gnueabi-2012.01-20120125_linux/bin/arm-linux-gnueabi- uImage*

Could it have anything to do with my binutils and/or U-Boot version? Any debugging tips?

*U-Boot INFO:*

U-Boot# version

U-Boot 2011.09-00010-g81c8c79 (Feb 13 2012 - 14:48:03) arm-angstrom-linux-gnueabi-gcc (GCC) 4.5.4 20111126 (prerelease) GNU ld (GNU Binutils) 2.20.1.20100303

Thanks for reading this far.