linaro-toolchain

linaro-toolchain@lists.linaro.org

7 participants
5634 discussions

by Renato Golin

== Progress == * Maintenance (CARD-1833 1/10) - Looking at AArch64 ADD->SUB a bit more * Buildbots (CARD-1823 6/10) - Moving LNT bot to CMake - Setting up LLD and LLDB buildbots - Investigating LNT instability / Perf buildbot * Background (3/10) - Code review, meetings, discussions, etc. - Reviewing more stride vectorizer patches (back-end) == Plan == * Try to get some development going back again...

10 years, 3 months

[ACTIVITY] 15 - 19 June 2015

by Yao Qi

# Progress # * Linaro GDB [7/10] ** TCWG-805, aarch64 native debugging multi-arch support. Aarch64 GDB works well debugging Aarch32 programs, except on handling fork/vfork and watchpoint. Test harness uses ldd which doesn't handle aarch32 too. Report a kernel issue that it doesn't get TLS base right through ptrace in compat mode. Got a patch to fix it. * FSF GDB [3/10] ** Push in a fix to unbreak arm native gdb build. ** Post a patch to fix a bug on using PTRACE_GETREGSET on arm-linux. ** GDB 7.10 release. Branch isn't created. Test results of arm and aarch64 look good. # Plan # * TCWG-805, start to push some preparatory patches upstream. * Off on Thu. -- Yao

10 years, 3 months

new gas feature: section name substitution sequence

by Nicolas Pitre

Hello toolchain people, I created a patch on top of upstream binutils for a feature I need which should be universally useful as well. Now I have 3 questions for you: 1) Does it look sane enough? 2) If so, could you integrate it in the Linaro release? 3) Would you be willing to promote it upstream? Comments appreciated. Here's the patch: ----- >8 Subject: [PATCH] gas: introduce section name substitution support When gas is invoked with --sectname-subst, the occurrence of %S in a section name will be substituted by the name of the current section. For example: .macro exception_code .pushsection %S.exception [exception code here] .popsection .endm .text [code] exception_code [...] .section .init [init code] exception_code [...] In the first exception_code invocation the .text.exception section is created while in the second invocation it is the .init.exception section that is created. This is useful e.g. to discriminate between anciliary sections that are tied to .init code and can be discarded at run time when initialization is over vs anciliary sections tied to .text sections that need to stay resident. This would also allow for actually omitting __exit sections from the Linux kernel binary when modules are configured in even when exit marked code generates exception table entries. Signed-off-by: Nicolas Pitre <nico(a)linaro.org> diff --git a/gas/ChangeLog b/gas/ChangeLog index 57fc30a..0189bb2 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,3 +1,11 @@ +2015-06-03 Nicolas Pitre <nico(a)linaro.org> + + * as.c (show_usage): Document --sectname-subst. + (parse_args): Add --sectname-subst. + * as.h (flag_sectname_subst): New. + * config/obj-elf.c (obj_elf_section_name): Add %S substitution. + * doc/as.texinfo: Document it. + 2015-06-03 Matthew Wahab <matthew.wahab(a)arm.com> * config/tc-arm.c (arm_archs): Add "armv8.1-a". diff --git a/gas/as.c b/gas/as.c index 2a8923f..fecfcd2 100644 --- a/gas/as.c +++ b/gas/as.c @@ -284,6 +284,8 @@ Options:\n\ fprintf (stream, _("\ --size-check=[error|warning]\n\ ELF .size directive check (default --size-check=error)\n")); + fprintf (stream, _("\ + --sectname-subst enable section name substitution sequences\n")); #endif fprintf (stream, _("\ -f skip whitespace and comment preprocessing\n")); @@ -447,6 +449,7 @@ parse_args (int * pargc, char *** pargv) OPTION_EXECSTACK, OPTION_NOEXECSTACK, OPTION_SIZE_CHECK, + OPTION_SECTNAME_SUBST, OPTION_ALTERNATE, OPTION_AL, OPTION_HASH_TABLE_SIZE, @@ -481,6 +484,7 @@ parse_args (int * pargc, char *** pargv) ,{"execstack", no_argument, NULL, OPTION_EXECSTACK} ,{"noexecstack", no_argument, NULL, OPTION_NOEXECSTACK} ,{"size-check", required_argument, NULL, OPTION_SIZE_CHECK} + ,{"sectname-subst", no_argument, NULL, OPTION_SECTNAME_SUBST} #endif ,{"fatal-warnings", no_argument, NULL, OPTION_WARN_FATAL} ,{"gdwarf-2", no_argument, NULL, OPTION_GDWARF2} @@ -848,6 +852,10 @@ This program has absolutely no warranty.\n")); else as_fatal (_("Invalid --size-check= option: `%s'"), optarg); break; + + case OPTION_SECTNAME_SUBST: + flag_sectname_subst = 1; + break; #endif case 'Z': flag_always_generate_output = 1; diff --git a/gas/as.h b/gas/as.h index 6de319e..635b2c5 100644 --- a/gas/as.h +++ b/gas/as.h @@ -589,6 +589,9 @@ COMMON enum size_check_warning } flag_size_check; + +/* If section name substitution sequences should be honored */ +COMMON int flag_sectname_subst; #endif #ifndef DOLLAR_AMBIGU diff --git a/gas/config/obj-elf.c b/gas/config/obj-elf.c index 4d7a8a7..78dc6d9 100644 --- a/gas/config/obj-elf.c +++ b/gas/config/obj-elf.c @@ -917,6 +917,27 @@ obj_elf_section_name (void) name = (char *) xmalloc (end - input_line_pointer + 1); memcpy (name, input_line_pointer, end - input_line_pointer); name[end - input_line_pointer] = '\0'; + + while (flag_sectname_subst) + { + char *subst = strchr (name, '%'); + if (subst && subst[1] == 'S') + { + int oldlen = strlen (name); + int substlen = strlen (now_seg->name); + int newlen = oldlen - 2 + substlen; + char *newname = (char *) xmalloc (newlen + 1); + int headlen = subst - name; + memcpy (newname, name, headlen); + strcpy (newname + headlen, now_seg->name); + strcat (newname + headlen, subst + 2); + xfree (name); + name = newname; + } + else + break; + } + #ifdef tc_canonicalize_section_name name = tc_canonicalize_section_name (name); #endif diff --git a/gas/doc/as.texinfo b/gas/doc/as.texinfo index 5710e1c..be13b6a 100644 --- a/gas/doc/as.texinfo +++ b/gas/doc/as.texinfo @@ -6259,6 +6259,36 @@ For ELF targets, the @code{.section} directive is used like this: .section @var{name} [, "@var{flags}"[, @@@var{type}[,@var{flag_specific_arguments}]]] @end smallexample +@cindex --sectname-subst +If the @samp{--sectname-subst} command-line option is provided, the @var{name} +argument may contain a substitution sequence. Only @code{%S} is supported +at the moment, and substitutes the current section name. For example: + +@smallexample +.macro exception_code +.section %S.exception +[exception code here] +.previous +.endm + +.text +[code] +exception_code +[...] + +.section .init +[init code] +exception_code +[...] +@end smallexample + +The two @code{exception_code} invocations above would create the +(a)code{.text.exception} and @code{.init.exception} sections respectively. +This is useful e.g. to discriminate between anciliary sections that are +tied to setup code to be discarded after use from anciliary sections that +need to stay resident without having to define two @code{exception_code} +macros just for that purpose. + The optional @var{flags} argument is a quoted string which may contain any combination of the following characters: @table @code Nicolas

10 years, 3 months

[ACTIVITY] 15-19 June 2015

by Christophe Lyon

* 1 day off (2/10) == Progress == * Neon intrinsics tests - committed last batch of tests - need to think about tests for vget_lane which are still missing, but not high priority * linaro-gcc-5.1-2015.06 snapshot (4/10) - committed branch merge with upstream gcc-5-branch - prepared snapshot & updated release scripts * Upstream maintenance (1/10) - backported a fix from Michael to 4.8 and 4.9 branches - backported fix for PR62308 to 4.9 branch - most of the time spent on bootstrapping on aarch64 HW - started looking at some recent new tests having trouble dealing with some multilib variants * Misc (3/10) - meetings, conf-calls, emails, ... == Next == * linaro-gcc-5.1-2015.06 snapshot - build release notes - create a proper tag * backports, release, validation: - update doc according to our new process * validation: - take unstable tests into account * upstream maintenance: - check recent regressions

10 years, 3 months

[ACTIVITY]

by Renato Golin

== Progress == * Maintenance (CARD-1833 2/10) - Initial work on ADD<->SUB for negative imm in asm * Buildbots (CARD-1823 6/10) - Adding test-suite to CMake buildbot (D10244) - Bisecting broken self-hosting vfp3 bots * Background (2/10) - Code review, meetings, discussions, etc. - Some more meetings about infrastructure... - LLVM status and plan for next half * Sprint Week in Grenoble == Plan == * Continue with CMake LNT changes * Carry on with ADD/SUB change * Revive ASM warnings discussion

10 years, 3 months

mfpu=neon and -march=native on aarch64-linux-gnu toolchain

by Virendra Kumar Pathak

Hi Linaro Toolchain Group, I have questions regarding -mfpu=neon and -march=native w.r.t aarch64 linaro native toolchain (aarch64-linux-gnu) I found gcc is not accepting these flags. On juno Board: gcc -mfpu=neon hello.c -o hello gcc: error: unrecognized command line option '-mfpu=neon' gcc -march=native hello.c -o hello hello.c:1:0: error: unknown value 'native' for –march Am I missing something ? Please help. Below is the machine details uname -a Linux juno 3.10.55.0-1-linaro-lt-vexpress64 #1ubuntu1~ci+141022094025 SMP Wed Oct 22 09:41:06 UTC 2014 aarch64 aarch64 aarch64 GNU/Linux gcc -v Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/usr/local/apps/gcc-native/gcc-linaro-5.1-2015.06.06.native-i686-mingw32_aarch64-linux-gnu/bin/../libexec/gcc/aarch64-linux-gnu/5.1.1/lto-wrapper Target: aarch64-linux-gnu Configured with: '/home/user_name/vpathak/build_abe/snapshots/gcc.git~linaro-4.9-branch/configure' SHELL=/bin/sh --with-bugurl=https://bugs.linaro.org --with-mpc=/home/user_name/vpathak/build_abe/builds/destdir/aarch64-linux-gnu --with-mpfr=/home/user_name/vpathak/build_abe/builds/destdir/aarch64-linux-gnu --with-gmp=/home/user_name/vpathak/build_abe/builds/destdir/aarch64-linux-gnu --with-gnu-as --with-gnu-ld --disable-libstdcxx-pch --disable-libmudflap --with-cloog=no --with-ppl=no --with-isl=no --disable-nls --enable-multiarch --disable-multilib --enable-c99 --with-arch=armv8-a --disable-shared --enable-static --with-build-sysroot=/home/user_name/vpathak/build_abe/sysroots/aarch64-linux-gnu --enable-lto --enable-linker-build-id --enable-long-long --enable-shared --with-sysroot=/home/user_name/vpathak/build_abe/builds/destdir/aarch64-linux-gnu/aarch64-linux-gnu/libc --enable-languages=c,c++,fortran,lto --enable-fix-cortex-a53-835769 --enable-checking=release --disable-bootstrap --with-bugurl= https://bugs.linaro.org --build=x86_64-unknown-linux-gnu --host=aarch64-linux-gnu --target=aarch64-linux-gnu --prefix=/home/user_name/vpathak/build_abe/builds/destdir/aarch64-linux-gnu Thread model: posix gcc version 5.1.1 (GCC) Thanks. -- with regards, Virendra Kumar Pathak

10 years, 3 months

gcc-5 git branch

by Virendra Kumar Pathak

Hi Linaro Toolchain Group, I see two git branches for GCC-5 at https://git.linaro.org 1. https://git.linaro.org/toolchain/gcc.git/shortlog/refs/heads/gcc-5-branch 2. https://git.linaro.org/toolchain/gcc.git/shortlog/refs/heads/linaro/gcc-5-b… What is the difference between these two branches ? Which branch should be used for development ? Is it branch (1) refers to GCC upstream branch for GCC5 & branch (2) is linaro version of branch (1). Please comment. -- with regards, Virendra Kumar Pathak

10 years, 3 months

[ACTIVITY] 1st-5th June

by Bernie Ogden

Holiday [2/10] Benchmark Automation - TCWG-360 [4/10] * Learned about central Jenkins instance * Considered ways of integrating benchmark scripts with said instance * Considered alternative way for benchmark scripts to interoperate with LAVA Misc [4/10] * Large mail backlog * Travel prep =Plan= Team sprint

10 years, 3 months

[ACTIVITY] 01 - 06 June 2015

by Yao Qi

# Progress # * Linaro GDB [4/10] ** TCWG-805, aarch64 native debugging multi-arch support. aarch64 native gdb is able to debug arm program now, but with some problems on coredump. Patches are not posted. ** Give my input on GDB kernel awareness too, and the proposal finally is posted upstream. * FSF GDB [1/10] ** Patches review. * Misc [5/10] ** Attend an internal ARM Debug/Tracing summit. ** Prepare for the France travel. # Plan # * Sprint in Grenoble. -- Yao

10 years, 3 months

abe: cross native toolchain compilation for aarch64-linux-gnu

by Virendra Kumar Pathak

Hi Linaro Toolchain Group, I am trying to build a cross-native toolchain for AARCH64 using ABE build framework. By cross native I mean that toolchain will be build on 0x86 (Red hat Santiago 6.4), it will run on AARCH64 (Juno) and will produce binaries to be run on AARCH64 (Juno) (If I am not mistaked) --build=0x86, --host=AARCH64, --target=AARCH64 Steps followed: 1. I built a cross toolchain first ../abe/configure ../abe/abe.sh --target aarch64-linux-gnu --build all --release 2015.05.29 --tarbin --disable update 2. Added the above cross toolchain (bin path) in the PATH 3. To build to cross-native ../abe/configure ../abe/abe.sh --host aarch64-linux-gnu --target aarch64-linux-gnu --build all --release 2015.06.01.native --tarbin --disable update But after some time, I got following error and compilation hanged. make: Leaving directory `/home/user_name/vpathak/build_abe/builds/aarch64-linux-gnu/aarch64-linux-gnu/gcc.git~linaro-4.9-branch-stage1' RUN: copy_gcc_libs_to_sysroot "/home/user_name/vpathak/build_abe/builds/destdir/aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc --sysroot=/home/user_name/vpathak/build_abe/sysroots/aarch64-linux-gnu" /home/user_name/vpathak/abe/lib/make.sh: line 962: ./builds/destdir/aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc: cannot execute binary file Am I missing something ? Please help. However with the following hack in the abe, I am able to compile cross-native toolchain for aarch64-linux-gnu. In the abe code base: ------------------------------------------------------------------------------------------------------- lib/make.sh Function copy_gcc_libs_to_sysroot() gcc_exe="`find -name ${target}-gcc`" - libgcc="`${gcc_exe} -print-file-name=${libgcc}`" + #libgcc="`${gcc_exe} -print-file-name=${libgcc}`" + libgcc="/home/user_name/vpathak/build_abe/builds/destdir/aarch64-linux-gnu/lib/gcc/aarch64-linux-gnu/4.9.3/libgcc.a" Since './builds/destdir/aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc' is native toolchain it will not run on 0x86. Thus libgcc will be empty. Therefore I hard-coded libgcc path. ------------------------------------------------------------------------------------------------------- I had to disable gdb compilation. This error I faced while compiling cross-native compilation only. Cross compilation is successful on the same 0x86 machine. checking for library containing waddstr... no configure: error: no enhanced curses library found; disable TUI make: *** [configure-gdb] Error 1 make: Leaving directory `/home/user_name/vpathak/build_abe/builds/aarch64-linux-gnu/aarch64-linux-gnu/binutils-gdb.git~linaro_gdb-7.8-branch-gdb' WARNING: Make had failures! ERROR (#159): build_all (Failed building .) hacked patch --- a/lib/make.sh +++ b/lib/make.sh @@ -31,10 +31,10 @@ build_all() # to rebuilt the sysroot. local builds="infrastructure binutils libc stage2 gdb" else - local builds="infrastructure binutils stage1 libc stage2 gdb" + local builds="infrastructure binutils stage1 libc stage2" fi if test "`echo ${target} | grep -c -- -linux-`" -eq 1; then - local builds="${builds} gdbserver" + local builds="${builds}" fi --------------------------------------------------------------------------------------------------------------- Thanks. -- with regards, Virendra Kumar Pathak

10 years, 3 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-toolchain