Hi Amir,

On Fri, May 30, 2025 at 4:13 AM Amirreza Zarrabi amirreza.zarrabi@oss.qualcomm.com wrote:

Hi Jens,

On 5/21/2025 1:16 AM, Jens Wiklander wrote:

...

Implement DMA heap for protected DMA-buf allocation in the TEE subsystem.

Restricted memory refers to memory buffers behind a hardware enforced firewall. It is not accessible to the kernel during normal circumstances but rather only accessible to certain hardware IPs or CPUs executing in higher or differently privileged mode than the kernel itself. This interface allows to allocate and manage such protected memory buffers via interaction with a TEE implementation.

The protected memory is allocated for a specific use-case, like Secure Video Playback, Trusted UI, or Secure Video Recording where certain hardware devices can access the memory.

The DMA-heaps are enabled explicitly by the TEE backend driver. The TEE backend drivers needs to implement protected memory pool to manage the protected memory.

Signed-off-by: Jens Wiklander jens.wiklander@linaro.org

drivers/tee/Makefile | 1 + drivers/tee/tee_heap.c | 487 ++++++++++++++++++++++++++++++++++++++ drivers/tee/tee_private.h | 6 + include/linux/tee_core.h | 65 +++++ 4 files changed, 559 insertions(+) create mode 100644 drivers/tee/tee_heap.c

diff --git a/drivers/tee/Makefile b/drivers/tee/Makefile index 5488cba30bd2..949a6a79fb06 100644 --- a/drivers/tee/Makefile +++ b/drivers/tee/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_TEE) += tee.o tee-objs += tee_core.o +tee-objs += tee_heap.o tee-objs += tee_shm.o tee-objs += tee_shm_pool.o obj-$(CONFIG_OPTEE) += optee/ diff --git a/drivers/tee/tee_heap.c b/drivers/tee/tee_heap.c new file mode 100644 index 000000000000..a332805f9f26 --- /dev/null +++ b/drivers/tee/tee_heap.c @@ -0,0 +1,487 @@ +// SPDX-License-Identifier: GPL-2.0-only +/*

• • Copyright (c) 2025, Linaro Limited
• */

+#include <linux/dma-buf.h> +#include <linux/dma-heap.h> +#include <linux/genalloc.h> +#include <linux/module.h> +#include <linux/scatterlist.h> +#include <linux/slab.h> +#include <linux/tee_core.h> +#include <linux/xarray.h>

+#include "tee_private.h"

+struct tee_dma_heap {

• struct dma_heap *heap;
  

• enum tee_dma_heap_id id;
  

• struct tee_protmem_pool *pool;
  

• struct tee_device *teedev;
  

• /* Protects pool and teedev above */
  

• struct mutex mu;
  

+};

+struct tee_heap_buffer {

• struct tee_protmem_pool *pool;
  

• struct tee_device *teedev;
  

• size_t size;
  

• size_t offs;
  

• struct sg_table table;
  

+};

+struct tee_heap_attachment {

• struct sg_table table;
  

• struct device *dev;
  

+};

+struct tee_protmem_static_pool {

• struct tee_protmem_pool pool;
  

• struct gen_pool *gen_pool;
  

• phys_addr_t pa_base;
  

• void *base;
  

+};

Isn't using an xarray excessive for just three entries, given static, limited IDs?

The interface is nice and scales well. Do you think it adds too much overhead? What should we use instead?

...

+#if IS_ENABLED(CONFIG_DMABUF_HEAPS) +static DEFINE_XARRAY_ALLOC(tee_dma_heap);

Why are we even considering sgl in the first place, given that tee_shm_register_fd() does not accept any dma_buf with more than one entry? Wouldn't it make sense to ensure sgl has a single entry after calling alloc()?

I didn't want to close that door completely, even if we can currently only have a single entry.

...

+static int copy_sg_table(struct sg_table *dst, struct sg_table *src) +{

• struct scatterlist *dst_sg;
  

• struct scatterlist *src_sg;
  

• int ret;
  

• int i;
  

• ret = sg_alloc_table(dst, src->orig_nents, GFP_KERNEL);
  

• if (ret)
  

•         return ret;
  

• dst_sg = dst->sgl;
  

• for_each_sgtable_sg(src, src_sg, i) {
  

•         sg_set_page(dst_sg, sg_page(src_sg), src_sg->length,
  

•                     src_sg->offset);
  

•         dst_sg = sg_next(dst_sg);
  

• }
  

• return 0;
  

+}

+static int tee_heap_attach(struct dma_buf *dmabuf,

•                    struct dma_buf_attachment *attachment)
  

+{

• struct tee_heap_buffer *buf = dmabuf->priv;
  

• struct tee_heap_attachment *a;
  

• int ret;
  

• a = kzalloc(sizeof(*a), GFP_KERNEL);
  

• if (!a)
  

•         return -ENOMEM;
  

• ret = copy_sg_table(&a->table, &buf->table);
  

• if (ret) {
  

•         kfree(a);
  

•         return ret;
  

• }
  

• a->dev = attachment->dev;
  

• attachment->priv = a;
  

• return 0;
  

+}

+static void tee_heap_detach(struct dma_buf *dmabuf,

•                     struct dma_buf_attachment *attachment)
  

+{

• struct tee_heap_attachment *a = attachment->priv;
  

• sg_free_table(&a->table);
  

• kfree(a);
  

+}

+static struct sg_table * +tee_heap_map_dma_buf(struct dma_buf_attachment *attachment,

•              enum dma_data_direction direction)
  

+{

• struct tee_heap_attachment *a = attachment->priv;
  

• int ret;
  

• ret = dma_map_sgtable(attachment->dev, &a->table, direction,
  

•                       DMA_ATTR_SKIP_CPU_SYNC);
  

• if (ret)
  

•         return ERR_PTR(ret);
  

• return &a->table;
  

+}

+static void tee_heap_unmap_dma_buf(struct dma_buf_attachment *attachment,

•                            struct sg_table *table,
  

•                            enum dma_data_direction direction)
  

+{

• struct tee_heap_attachment *a = attachment->priv;
  

• WARN_ON(&a->table != table);
  

• dma_unmap_sgtable(attachment->dev, table, direction,
  

•                   DMA_ATTR_SKIP_CPU_SYNC);
  

+}

+static void tee_heap_buf_free(struct dma_buf *dmabuf) +{

• struct tee_heap_buffer *buf = dmabuf->priv;
  

• struct tee_device *teedev = buf->teedev;
  

• buf->pool->ops->free(buf->pool, &buf->table);
  

• tee_device_put(teedev);
  

+}

+static const struct dma_buf_ops tee_heap_buf_ops = {

• .attach = tee_heap_attach,
  

• .detach = tee_heap_detach,
  

• .map_dma_buf = tee_heap_map_dma_buf,
  

• .unmap_dma_buf = tee_heap_unmap_dma_buf,
  

• .release = tee_heap_buf_free,
  

+};

+static struct dma_buf *tee_dma_heap_alloc(struct dma_heap *heap,

•                                   unsigned long len, u32 fd_flags,
  

•                                   u64 heap_flags)
  

+{

• struct tee_dma_heap *h = dma_heap_get_drvdata(heap);
  

• DEFINE_DMA_BUF_EXPORT_INFO(exp_info);
  

• struct tee_device *teedev = NULL;
  

• struct tee_heap_buffer *buf;
  

• struct tee_protmem_pool *pool;
  

• struct dma_buf *dmabuf;
  

• int rc;
  

• mutex_lock(&h->mu);
  

• if (tee_device_get(h->teedev)) {
  

•         teedev = h->teedev;
  

•         pool = h->pool;
  

• }
  

• mutex_unlock(&h->mu);
  

• if (!teedev)
  

•         return ERR_PTR(-EINVAL);
  

• buf = kzalloc(sizeof(*buf), GFP_KERNEL);
  

• if (!buf) {
  

•         dmabuf = ERR_PTR(-ENOMEM);
  

•         goto err;
  

• }
  

• buf->size = len;
  

• buf->pool = pool;
  

• buf->teedev = teedev;
  

• rc = pool->ops->alloc(pool, &buf->table, len, &buf->offs);
  

• if (rc) {
  

•         dmabuf = ERR_PTR(rc);
  

•         goto err_kfree;
  

• }
  

• exp_info.ops = &tee_heap_buf_ops;
  

• exp_info.size = len;
  

• exp_info.priv = buf;
  

• exp_info.flags = fd_flags;
  

• dmabuf = dma_buf_export(&exp_info);
  

• if (IS_ERR(dmabuf))
  

•         goto err_protmem_free;
  

• return dmabuf;
  

+err_protmem_free:

• pool->ops->free(pool, &buf->table);
  

+err_kfree:

• kfree(buf);
  

+err:

• tee_device_put(h->teedev);
  

• return dmabuf;
  

+}

+static const struct dma_heap_ops tee_dma_heap_ops = {

• .allocate = tee_dma_heap_alloc,
  

+};

+static const char *heap_id_2_name(enum tee_dma_heap_id id) +{

• switch (id) {
  

• case TEE_DMA_HEAP_SECURE_VIDEO_PLAY:
  

•         return "protected,secure-video";
  

• case TEE_DMA_HEAP_TRUSTED_UI:
  

•         return "protected,trusted-ui";
  

• case TEE_DMA_HEAP_SECURE_VIDEO_RECORD:
  

•         return "protected,secure-video-record";
  

• default:
  

•         return NULL;
  

• }
  

+}

+static int alloc_dma_heap(struct tee_device *teedev, enum tee_dma_heap_id id,

•                   struct tee_protmem_pool *pool)
  

+{

• struct dma_heap_export_info exp_info = {
  

•         .ops = &tee_dma_heap_ops,
  

•         .name = heap_id_2_name(id),
  

• };
  

• struct tee_dma_heap *h;
  

• int rc;
  

• if (!exp_info.name)
  

•         return -EINVAL;
  

• if (xa_reserve(&tee_dma_heap, id, GFP_KERNEL)) {
  

•         if (!xa_load(&tee_dma_heap, id))
  

•                 return -EEXIST;
  

•         return -ENOMEM;
  

• }
  

• h = kzalloc(sizeof(*h), GFP_KERNEL);
  

• if (!h)
  

•         return -ENOMEM;
  

• h->id = id;
  

• h->teedev = teedev;
  

• h->pool = pool;
  

• mutex_init(&h->mu);
  

• exp_info.priv = h;
  

• h->heap = dma_heap_add(&exp_info);
  

• if (IS_ERR(h->heap)) {
  

•         rc = PTR_ERR(h->heap);
  

•         kfree(h);
  

•         return rc;
  

• }
  

• /* "can't fail" due to the call to xa_reserve() above */
  

• return WARN(xa_store(&tee_dma_heap, id, h, GFP_KERNEL),
  

•             "xa_store() failed");
  

+}

+int tee_device_register_dma_heap(struct tee_device *teedev,

•                          enum tee_dma_heap_id id,
  

•                          struct tee_protmem_pool *pool)
  

+{

• struct tee_dma_heap *h;
  

• int rc;
  

• h = xa_load(&tee_dma_heap, id);
  

• if (h) {
  

•         mutex_lock(&h->mu);
  

•         if (h->teedev) {
  

•                 rc = -EBUSY;
  

•         } else {
  

•                 h->teedev = teedev;
  

•                 h->pool = pool;
  

•                 rc = 0;
  

•         }
  

•         mutex_unlock(&h->mu);
  

• } else {
  

•         rc = alloc_dma_heap(teedev, id, pool);
  

• }
  

• if (rc)
  

•         dev_err(&teedev->dev, "can't register DMA heap id %d (%s)\n",
  

•                 id, heap_id_2_name(id));
  

• return rc;
  

+} +EXPORT_SYMBOL_GPL(tee_device_register_dma_heap);

+void tee_device_unregister_all_dma_heaps(struct tee_device *teedev) +{

• struct tee_protmem_pool *pool;
  

• struct tee_dma_heap *h;
  

• u_long i;
  

• xa_for_each(&tee_dma_heap, i, h) {
  

•         if (h) {
  

•                 pool = NULL;
  

•                 mutex_lock(&h->mu);
  

•                 if (h->teedev == teedev) {
  

•                         pool = h->pool;
  

•                         h->teedev = NULL;
  

•                         h->pool = NULL;
  

•                 }
  

•                 mutex_unlock(&h->mu);
  

•                 if (pool)
  

•                         pool->ops->destroy_pool(pool);
  

•         }
  

• }
  

+} +EXPORT_SYMBOL_GPL(tee_device_unregister_all_dma_heaps);

(Please first see comment below for update_shm())

Other than calling update_shm(), nothing significant happens in this function. If we remove update_shm(), these operations can be moved to the register function.

Yes, but at the expense of making that function more complicated.

However, I also argue that since we have a well-designed generic function like tee_ioctl_shm_register_fd(), why should we restrict ourselves to checking the type of dma_buf? Any dma_buf should be acceptable to register as tee_shm (thougn it should fail if it is used in protected operation). Otherwise, TEE_IOC_SHM_REGISTER_FD is not an accurate name it should be TEE_IOC_SHM_REGISTER_PROTECTED_FD (or something similar).

tee_shm_register_fd() can handle both DMA-bufs from a registered TEE heap and DMA-bufs allocated by other means. The backend driver may have further restrictions. The OP-TEE FF-A driver can only accept DMA-bufs allocated from a registered TEE heap since it needs the shared memory handle of the underlying pool to pass the buffer as an argument to the secure world.

...

+int tee_heap_update_from_dma_buf(struct tee_device *teedev,

•                          struct dma_buf *dmabuf, size_t *offset,
  

•                          struct tee_shm *shm,
  

•                          struct tee_shm **parent_shm)
  

+{

• struct tee_heap_buffer *buf;
  

• int rc;
  

• /* The DMA-buf must be from our heap */
  

• if (dmabuf->ops != &tee_heap_buf_ops)
  

•         return -EINVAL;
  

• buf = dmabuf->priv;
  

• /* The buffer must be from the same teedev */
  

• if (buf->teedev != teedev)
  

•         return -EINVAL;
  

• shm->size = buf->size;
  

• rc = buf->pool->ops->update_shm(buf->pool, &buf->table, buf->offs, shm,
  

•                                 parent_shm);
  

• if (!rc && *parent_shm)
  

•         *offset = buf->offs;
  

• return rc;
  

+} +#else +int tee_device_register_dma_heap(struct tee_device *teedev __always_unused,

•                          enum tee_dma_heap_id id __always_unused,
  

•                          struct tee_protmem_pool *pool __always_unused)
  

+{

• return -EINVAL;
  

+} +EXPORT_SYMBOL_GPL(tee_device_register_dma_heap);

+void +tee_device_unregister_all_dma_heaps(struct tee_device *teedev __always_unused) +{ +} +EXPORT_SYMBOL_GPL(tee_device_unregister_all_dma_heaps);

+int tee_heap_update_from_dma_buf(struct tee_device *teedev __always_unused,

•                          struct dma_buf *dmabuf __always_unused,
  

•                          size_t *offset __always_unused,
  

•                          struct tee_shm *shm __always_unused,
  

•                          struct tee_shm **parent_shm __always_unused)
  

+{

• return -EINVAL;
  

+} +#endif

+static struct tee_protmem_static_pool * +to_protmem_static_pool(struct tee_protmem_pool *pool) +{

• return container_of(pool, struct tee_protmem_static_pool, pool);
  

+}

+static int protmem_pool_op_static_alloc(struct tee_protmem_pool *pool,

•                                 struct sg_table *sgt, size_t size,
  

•                                 size_t *offs)
  

+{

• struct tee_protmem_static_pool *stp = to_protmem_static_pool(pool);
  

• phys_addr_t pa;
  

• int ret;
  

• pa = gen_pool_alloc(stp->gen_pool, size);
  

• if (!pa)
  

•         return -ENOMEM;
  

• ret = sg_alloc_table(sgt, 1, GFP_KERNEL);
  

• if (ret) {
  

•         gen_pool_free(stp->gen_pool, pa, size);
  

•         return ret;
  

• }
  

• sg_set_page(sgt->sgl, phys_to_page(pa), size, 0);
  

• *offs = pa - stp->pa_base;
  

• return 0;
  

+}

+static void protmem_pool_op_static_free(struct tee_protmem_pool *pool,

•                                 struct sg_table *sgt)
  

+{

• struct tee_protmem_static_pool *stp = to_protmem_static_pool(pool);
  

• struct scatterlist *sg;
  

• int i;
  

Should be a loop?

...

• for_each_sgtable_sg(sgt, sg, i)
  

•         gen_pool_free(stp->gen_pool, sg_phys(sg), sg->length);
  

• sg_free_table(sgt);
  

+}

+static int protmem_pool_op_static_update_shm(struct tee_protmem_pool *pool,

•                                      struct sg_table *sgt, size_t offs,
  

•                                      struct tee_shm *shm,
  

•                                      struct tee_shm **parent_shm)
  

+{

• struct tee_protmem_static_pool *stp = to_protmem_static_pool(pool);
  

• shm->paddr = stp->pa_base + offs;
  

• *parent_shm = NULL;
  

• return 0;
  

+}

+static void protmem_pool_op_static_destroy_pool(struct tee_protmem_pool *pool) +{

• struct tee_protmem_static_pool *stp = to_protmem_static_pool(pool);
  

• gen_pool_destroy(stp->gen_pool);
  

• memunmap(stp->base);
  

• kfree(stp);
  

+}

+static struct tee_protmem_pool_ops protmem_pool_ops_static = {

• .alloc = protmem_pool_op_static_alloc,
  

• .free = protmem_pool_op_static_free,
  

• .update_shm = protmem_pool_op_static_update_shm,
  

• .destroy_pool = protmem_pool_op_static_destroy_pool,
  

+};

+struct tee_protmem_pool *tee_protmem_static_pool_alloc(phys_addr_t paddr,

•                                                size_t size)
  

+{

• const size_t page_mask = PAGE_SIZE - 1;
  

• struct tee_protmem_static_pool *stp;
  

• int rc;
  

• /* Check it's page aligned */
  

• if ((paddr | size) & page_mask)
  

•         return ERR_PTR(-EINVAL);
  

• stp = kzalloc(sizeof(*stp), GFP_KERNEL);
  

• if (!stp)
  

•         return ERR_PTR(-ENOMEM);
  

I understand your reasoning for this, but considering that paddr comes from the backend, isn’t it the backend’s responsibility to ensure that pfn_valid() passes? For example, it might want to call devm_memremap_pages() itself. So, should we simply ensure that the pages are valid , and fail on return, rather than attempting to fix them?

You have a point. I'll update accordingly.

...

• /*
  

•  * Map the memory as uncached to make sure the kernel can work with
  

•  * __pfn_to_page() and friends since that's needed when passing the
  

•  * protected DMA-buf to a device. The memory should otherwise not
  

•  * be touched by the kernel since it's likely to cause an external
  

•  * abort due to the protection status.
  

•  */
  

• stp->base = memremap(paddr, size, MEMREMAP_WC);
  

• if (!stp->base) {
  

•         rc = -EINVAL;
  

•         goto err_free;
  

• }
  

• stp->gen_pool = gen_pool_create(PAGE_SHIFT, -1);
  

• if (!stp->gen_pool) {
  

•         rc = -ENOMEM;
  

•         goto err_unmap;
  

• }
  

• rc = gen_pool_add(stp->gen_pool, paddr, size, -1);
  

• if (rc)
  

•         goto err_free_pool;
  

• stp->pool.ops = &protmem_pool_ops_static;
  

• stp->pa_base = paddr;
  

• return &stp->pool;
  

+err_free_pool:

• gen_pool_destroy(stp->gen_pool);
  

+err_unmap:

• memunmap(stp->base);
  

+err_free:

• kfree(stp);
  

• return ERR_PTR(rc);
  

+} +EXPORT_SYMBOL_GPL(tee_protmem_static_pool_alloc); diff --git a/drivers/tee/tee_private.h b/drivers/tee/tee_private.h index 9bc50605227c..6c6ff5d5eed2 100644 --- a/drivers/tee/tee_private.h +++ b/drivers/tee/tee_private.h @@ -8,6 +8,7 @@ #include <linux/cdev.h> #include <linux/completion.h> #include <linux/device.h> +#include <linux/dma-buf.h> #include <linux/kref.h> #include <linux/mutex.h> #include <linux/types.h> @@ -24,4 +25,9 @@ struct tee_shm *tee_shm_alloc_user_buf(struct tee_context *ctx, size_t size); struct tee_shm *tee_shm_register_user_buf(struct tee_context *ctx, unsigned long addr, size_t length);

+int tee_heap_update_from_dma_buf(struct tee_device *teedev,

•                          struct dma_buf *dmabuf, size_t *offset,
  

•                          struct tee_shm *shm,
  

•                          struct tee_shm **parent_shm);
  

#endif /*TEE_PRIVATE_H*/ diff --git a/include/linux/tee_core.h b/include/linux/tee_core.h index a38494d6b5f4..b8b99c97e00c 100644 --- a/include/linux/tee_core.h +++ b/include/linux/tee_core.h @@ -8,9 +8,11 @@

#include <linux/cdev.h> #include <linux/device.h> +#include <linux/dma-buf.h> #include <linux/idr.h> #include <linux/kref.h> #include <linux/list.h> +#include <linux/scatterlist.h> #include <linux/tee.h> #include <linux/tee_drv.h> #include <linux/types.h> @@ -30,6 +32,12 @@ #define TEE_DEVICE_FLAG_REGISTERED 0x1 #define TEE_MAX_DEV_NAME_LEN 32

+enum tee_dma_heap_id {

• TEE_DMA_HEAP_SECURE_VIDEO_PLAY = 1,
  

• TEE_DMA_HEAP_TRUSTED_UI,
  

• TEE_DMA_HEAP_SECURE_VIDEO_RECORD,
  

+};

/**

• struct tee_device - TEE Device representation
• @name: name of device

@@ -116,6 +124,36 @@ struct tee_desc { u32 flags; };

+/**

• • struct tee_protmem_pool - protected memory pool
• • @ops: operations
• • This is an abstract interface where this struct is expected to be
• • embedded in another struct specific to the implementation.
• */

+struct tee_protmem_pool {

• const struct tee_protmem_pool_ops *ops;
  

+};

+/**

• • struct tee_protmem_pool_ops - protected memory pool operations
• • @alloc: called when allocating protected memory
• • @free: called when freeing protected memory
• • @update_shm: called when registering a dma-buf to update the @shm

• •               with physical address of the buffer or to return the
    

• •               @parent_shm of the memory pool
    

• • @destroy_pool: called when destroying the pool
• */

+struct tee_protmem_pool_ops {

• int (*alloc)(struct tee_protmem_pool *pool, struct sg_table *sgt,
  

•              size_t size, size_t *offs);
  

• void (*free)(struct tee_protmem_pool *pool, struct sg_table *sgt);
  

Why do we need update_shm()? Currently, it seems to do nothing beyond setting parent_shm, simply indicating that this shm is part of a larger shm.

What if the backend wants to handle the buffer using something other than tee_shm - for example, if it doesn’t want to use tee_shm_alloc_dma_mem()? Would removing update_shm() and replacing it with shm_release(), while also getting rid of tee_heap_update_from_dma_buf(), be a more streamlined approach?"

This way, tee_shm for dma_buf would be treated like any other tee_shm - using refcounting based on tee_shm rather than its parent - and we would simply call shm_release() upon release.

With this change, we can even accept any dm_buf making the TEE_IOC_SHM_REGISTER_FD generic.

The parent_shm is a must for the dynamic allocation of protected memory for the OP-TEE backend driver.

Cheers, Jens

Best Regards, Amir

...

• int (*update_shm)(struct tee_protmem_pool *pool, struct sg_table *sgt,
  

•                   size_t offs, struct tee_shm *shm,
  

•                   struct tee_shm **parent_shm);
  

• void (*destroy_pool)(struct tee_protmem_pool *pool);
  

+};

/**

• tee_device_alloc() - Allocate a new struct tee_device instance
• @teedesc: Descriptor for this driver

@@ -154,6 +192,11 @@ int tee_device_register(struct tee_device *teedev); */ void tee_device_unregister(struct tee_device *teedev);

+int tee_device_register_dma_heap(struct tee_device *teedev,

•                          enum tee_dma_heap_id id,
  

•                          struct tee_protmem_pool *pool);
  

+void tee_device_unregister_all_dma_heaps(struct tee_device *teedev);

/**

• tee_device_set_dev_groups() - Set device attribute groups
• @teedev: Device to register

@@ -229,6 +272,28 @@ static inline void tee_shm_pool_free(struct tee_shm_pool *pool) pool->ops->destroy_pool(pool); }

+/**

• • tee_protmem_static_pool_alloc() - Create a protected memory manager
• • @paddr: Physical address of start of pool
• • @size: Size in bytes of the pool
• • @returns pointer to a 'struct tee_shm_pool' or an ERR_PTR on failure.
• */

+struct tee_protmem_pool *tee_protmem_static_pool_alloc(phys_addr_t paddr,

•                                                size_t size);
  

+/**

• • tee_protmem_pool_free() - Free a protected memory pool
• • @pool: The protected memory pool to free
• • There must be no remaining protected memory allocated from this pool
• • when this function is called.
• */

+static inline void tee_protmem_pool_free(struct tee_protmem_pool *pool) +{

• pool->ops->destroy_pool(pool);
  

+}

/**

• tee_get_drvdata() - Return driver_data pointer
• @returns the driver_data pointer supplied to tee_register().