Linaro-mm-sig

linaro-mm-sig@lists.linaro.org

32 participants
5932 discussions

Re: [Linaro-mm-sig] [PATCH v2 1/2] [RFC] ARM: IOMMU: Tegra20: iommu_ops for GART driver

by Hiroshi Doyu

Hi Joerg, Thank you for your quick review. From: Joerg Roedel <joerg.roedel(a)amd.com> Subject: Re: [PATCH v2 1/2] [RFC] ARM: IOMMU: Tegra20: iommu_ops for GART driver Date: Fri, 16 Dec 2011 16:43:31 +0100 Message-ID: <20111216154331.GD29877(a)amd.com> > On Thu, Dec 15, 2011 at 03:11:29PM +0200, Hiroshi DOYU wrote: > > Tegra 20 IOMMU H/W, GART (Graphics Address Relocation Table). This > > patch implements struct iommu_ops for GART for the upper IOMMU API. > > > > This H/W module supports only single virtual address space(domain), > > and manages a single level 1-to-1 mapping H/W translation page table. > > > > Signed-off-by: Hiroshi DOYU <hdoyu(a)nvidia.com> > > --- > > drivers/iommu/Kconfig | 11 + > > drivers/iommu/Makefile | 1 + > > drivers/iommu/tegra-gart.c | 451 ++++++++++++++++++++++++++++++++++++++++++++ > > The code looks good in general. Thanks. > I think we need to extend the IOMMU-API > a little bit to better support GART IOMMUs. A user of the IOMMU-API > should be able to get the information about the iova-base and size of > the aperture for example. These extensions will be beneficial for > porting other GART-like driver to the IOMMU-API too. is it similar to how ".pgsize_bitmap" is passed? > > > Joerg > > -- > AMD Operating System Research Center > > Advanced Micro Devices GmbH Einsteinring 24 85609 Dornach > General Managers: Alberto Bozzo, Andrew Bowd > Registration: Dornach, Landkr. Muenchen; Registerger. Muenchen, HRB Nr. 43632 >

14 years, 2 months

[PATCHv17 0/11] Contiguous Memory Allocator

by Marek Szyprowski

Welcome everyone once again, This is yet another release of the Contiguous Memory Allocator patches. This version is mainly a result of the discussion on Kernel Summit in Prague. The main change is completely different code base for the migration feature of the CMA. Now it shares the code with memory compaction subsystem, not the hotplug like it was before. This code has been kindly provided by Michal Nazarewicz. There are also a few fixes here and there, see changelog for the details. Please notice that this patch series is aimed to start further discussion. There are still few issues that need to be resolved before CMA will be really ready. The most hot problem is the issue with movable pages that causes migration to fail from time to time. Our investigation leads us to the point that these rare pages cannot be migrated because there are some pending io operations on them. ARM integration code has not been changed since last version, it provides implementation of all the ideas that has been discussed during Linaro Sprint meeting. Here are the details: This version provides a solution for complete integration of CMA to DMA mapping subsystem on ARM architecture. The issue caused by double dma pages mapping and possible aliasing in coherent memory mapping has been finally resolved, both for GFP_ATOMIC case (allocations comes from coherent memory pool) and non-GFP_ATOMIC case (allocations comes from CMA managed areas). For coherent, nommu, ARMv4 and ARMv5 systems the current DMA-mapping implementation has been kept. For ARMv6+ systems, CMA has been enabled and a special pool of coherent memory for atomic allocations has been created. The size of this pool defaults to DEFAULT_CONSISTEN_DMA_SIZE/8, but can be changed with coherent_pool kernel parameter (if really required). All atomic allocations are served from this pool. I've did a little simplification here, because there is no separate pool for writecombine memory - such requests are also served from coherent pool. I don't think that such simplification is a problem here - I found no driver that use dma_alloc_writecombine with GFP_ATOMIC flags. All non-atomic allocation are served from CMA area. Kernel mapping is updated to reflect required memory attributes changes. This is possible because during early boot, all CMA area are remapped with 4KiB pages in kernel low-memory. This version have been tested on Samsung S5PC110 based Goni machine and Exynos4 UniversalC210 board with various V4L2 multimedia drivers. Coherent atomic allocations has been tested by manually enabling the dma bounce for the s3c-sdhci device. All patches are prepared for Linux Kernel v3.2-rc2. A few words for these who see CMA for the first time: The Contiguous Memory Allocator (CMA) makes it possible for device drivers to allocate big contiguous chunks of memory after the system has booted. The main difference from the similar frameworks is the fact that CMA allows to transparently reuse memory region reserved for the big chunk allocation as a system memory, so no memory is wasted when no big chunk is allocated. Once the alloc request is issued, the framework will migrate system pages to create a required big chunk of physically contiguous memory. For more information you can refer to nice LWN articles: http://lwn.net/Articles/447405/ and http://lwn.net/Articles/450286/ as well as links to previous versions of the CMA framework. The CMA framework has been initially developed by Michal Nazarewicz at Samsung Poland R&D Center. Since version 9, I've taken over the development, because Michal has left the company. TODO (optional): - implement support for contiguous memory areas placed in HIGHMEM zone - resolve issue with movable pages with pending io operations Best regards Marek Szyprowski Samsung Poland R&D Center Links to previous versions of the patchset: v16: <http://www.spinics.net/lists/linux-mm/msg25066.html> v15: <http://www.spinics.net/lists/linux-mm/msg23365.html> v14: <http://www.spinics.net/lists/linux-media/msg36536.html> v13: (internal, intentionally not released) v12: <http://www.spinics.net/lists/linux-media/msg35674.html> v11: <http://www.spinics.net/lists/linux-mm/msg21868.html> v10: <http://www.spinics.net/lists/linux-mm/msg20761.html> v9: <http://article.gmane.org/gmane.linux.kernel.mm/60787> v8: <http://article.gmane.org/gmane.linux.kernel.mm/56855> v7: <http://article.gmane.org/gmane.linux.kernel.mm/55626> v6: <http://article.gmane.org/gmane.linux.kernel.mm/55626> v5: (intentionally left out as CMA v5 was identical to CMA v4) v4: <http://article.gmane.org/gmane.linux.kernel.mm/52010> v3: <http://article.gmane.org/gmane.linux.kernel.mm/51573> v2: <http://article.gmane.org/gmane.linux.kernel.mm/50986> v1: <http://article.gmane.org/gmane.linux.kernel.mm/50669> Changelog: v17: 1. Replaced whole CMA core memory migration code to the new one kindly provided by Michal Nazarewicz. The new code is based on memory compaction framework not the memory hotplug, like it was before. This change has been suggested by Mel Godman. 2. Addressed most of the comments from Andrew Morton and Mel Gorman in the rest of the CMA code. 3. Fixed broken initialization on ARM systems with DMA zone enabled. 4. Rebased onto v3.2-rc2 kernel. v16: 1. merged a fixup from Michal Nazarewicz to address comments from Dave Hansen about checking if pfns belong to the same memory zone 2. merged a fix from Michal Nazarewicz for incorrect handling of pages which belong to page block that is in MIGRATE_ISOLATE state, in very rare cases the migrate type of page block might have been changed from MIGRATE_CMA to MIGRATE_MOVABLE because of this bug 3. moved some common code to include/asm-generic 4. added support for x86 DMA-mapping framework for pci-dma hardware, CMA can be now even more widely tested on KVM/QEMU and a lot of common x86 boxes 5. rebased onto next-20111005 kernel tree, which includes changes in ARM DMA-mapping subsystem (CONSISTENT_DMA_SIZE removal) 6. removed patch for CMA s5p-fimc device private regions (served only as example) and provided the one that matches real life case - s5p-mfc device v15: 1. fixed calculation of the total memory after activating CMA area (was broken from v12) 2. more code cleanup in drivers/base/dma-contiguous.c 3. added address limit for default CMA area 4. rewrote ARM DMA integration: - removed "ARM: DMA: steal memory for DMA coherent mappings" patch - kept current DMA mapping implementation for coherent, nommu and ARMv4/ARMv5 systems - enabled CMA for all ARMv6+ systems - added separate, small pool for coherent atomic allocations, defaults to CONSISTENT_DMA_SIZE/8, but can be changed with kernel parameter coherent_pool=[size] v14: 1. Merged with "ARM: DMA: steal memory for DMA coherent mappings" patch, added support for GFP_ATOMIC allocations. 2. Added checks for NULL device pointer v13: (internal, intentionally not released) v12: 1. Fixed 2 nasty bugs in dma-contiguous allocator: - alignment argument was not passed correctly - range for dma_release_from_contiguous was not checked correctly 2. Added support for architecture specfic dma_contiguous_early_fixup() function 3. CMA and DMA-mapping integration for ARM architechture has been rewritten to take care of the memory aliasing issue that might happen for newer ARM CPUs (mapping of the same pages with different cache attributes is forbidden). TODO: add support for GFP_ATOMIC allocations basing on the "ARM: DMA: steal memory for DMA coherent mappings" patch and implement support for contiguous memory areas that are placed in HIGHMEM zone v11: 1. Removed genalloc usage and replaced it with direct calls to bitmap_* functions, dropped patches that are not needed anymore (genalloc extensions) 2. Moved all contiguous area management code from mm/cma.c to drivers/base/dma-contiguous.c 3. Renamed cm_alloc/free to dma_alloc/release_from_contiguous 4. Introduced global, system wide (default) contiguous area configured with kernel config and kernel cmdline parameters 5. Simplified initialization to just one function: dma_declare_contiguous() 6. Added example of device private memory contiguous area v10: 1. Rebased onto 3.0-rc2 and resolved all conflicts 2. Simplified CMA to be just a pure memory allocator, for use with platfrom/bus specific subsystems, like dma-mapping. Removed all device specific functions are calls. 3. Integrated with ARM DMA-mapping subsystem. 4. Code cleanup here and there. 5. Removed private context support. v9: 1. Rebased onto 2.6.39-rc1 and resolved all conflicts 2. Fixed a bunch of nasty bugs that happened when the allocation failed (mainly kernel oops due to NULL ptr dereference). 3. Introduced testing code: cma-regions compatibility layer and videobuf2-cma memory allocator module. v8: 1. The alloc_contig_range() function has now been separated from CMA and put in page_allocator.c. This function tries to migrate all LRU pages in specified range and then allocate the range using alloc_contig_freed_pages(). 2. Support for MIGRATE_CMA has been separated from the CMA code. I have not tested if CMA works with ZONE_MOVABLE but I see no reasons why it shouldn't. 3. I have added a @private argument when creating CMA contexts so that one can reserve memory and not share it with the rest of the system. This way, CMA acts only as allocation algorithm. v7: 1. A lot of functionality that handled driver->allocator_context mapping has been removed from the patchset. This is not to say that this code is not needed, it's just not worth posting everything in one patchset. Currently, CMA is "just" an allocator. It uses it's own migratetype (MIGRATE_CMA) for defining ranges of pageblokcs which behave just like ZONE_MOVABLE but dispite the latter can be put in arbitrary places. 2. The migration code that was introduced in the previous version actually started working. v6: 1. Most importantly, v6 introduces support for memory migration. The implementation is not yet complete though. Migration support means that when CMA is not using memory reserved for it, page allocator can allocate pages from it. When CMA wants to use the memory, the pages have to be moved and/or evicted as to make room for CMA. To make it possible it must be guaranteed that only movable and reclaimable pages are allocated in CMA controlled regions. This is done by introducing a MIGRATE_CMA migrate type that guarantees exactly that. Some of the migration code is "borrowed" from Kamezawa Hiroyuki's alloc_contig_pages() implementation. The main difference is that thanks to MIGRATE_CMA migrate type CMA assumes that memory controlled by CMA are is always movable or reclaimable so that it makes allocation decisions regardless of the whether some pages are actually allocated and migrates them if needed. The most interesting patches from the patchset that implement the functionality are: 09/13: mm: alloc_contig_free_pages() added 10/13: mm: MIGRATE_CMA migration type added 11/13: mm: MIGRATE_CMA isolation functions added 12/13: mm: cma: Migration support added [wip] Currently, kernel panics in some situations which I am trying to investigate. 2. cma_pin() and cma_unpin() functions has been added (after a conversation with Johan Mossberg). The idea is that whenever hardware does not use the memory (no transaction is on) the chunk can be moved around. This would allow defragmentation to be implemented if desired. No defragmentation algorithm is provided at this time. 3. Sysfs support has been replaced with debugfs. I always felt unsure about the sysfs interface and when Greg KH pointed it out I finally got to rewrite it to debugfs. v5: (intentionally left out as CMA v5 was identical to CMA v4) v4: 1. The "asterisk" flag has been removed in favour of requiring that platform will provide a "*=<regions>" rule in the map attribute. 2. The terminology has been changed slightly renaming "kind" to "type" of memory. In the previous revisions, the documentation indicated that device drivers define memory kinds and now, v3: 1. The command line parameters have been removed (and moved to a separate patch, the fourth one). As a consequence, the cma_set_defaults() function has been changed -- it no longer accepts a string with list of regions but an array of regions. 2. The "asterisk" attribute has been removed. Now, each region has an "asterisk" flag which lets one specify whether this region should by considered "asterisk" region. 3. SysFS support has been moved to a separate patch (the third one in the series) and now also includes list of regions. v2: 1. The "cma_map" command line have been removed. In exchange, a SysFS entry has been created under kernel/mm/contiguous. The intended way of specifying the attributes is a cma_set_defaults() function called by platform initialisation code. "regions" attribute (the string specified by "cma" command line parameter) can be overwritten with command line parameter; the other attributes can be changed during run-time using the SysFS entries. 2. The behaviour of the "map" attribute has been modified slightly. Currently, if no rule matches given device it is assigned regions specified by the "asterisk" attribute. It is by default built from the region names given in "regions" attribute. 3. Devices can register private regions as well as regions that can be shared but are not reserved using standard CMA mechanisms. A private region has no name and can be accessed only by devices that have the pointer to it. 4. The way allocators are registered has changed. Currently, a cma_allocator_register() function is used for that purpose. Moreover, allocators are attached to regions the first time memory is registered from the region or when allocator is registered which means that allocators can be dynamic modules that are loaded after the kernel booted (of course, it won't be possible to allocate a chunk of memory from a region if allocator is not loaded). 5. Index of new functions: +static inline dma_addr_t __must_check +cma_alloc_from(const char *regions, size_t size, + dma_addr_t alignment) +static inline int +cma_info_about(struct cma_info *info, const const char *regions) +int __must_check cma_region_register(struct cma_region *reg); +dma_addr_t __must_check +cma_alloc_from_region(struct cma_region *reg, + size_t size, dma_addr_t alignment); +static inline dma_addr_t __must_check +cma_alloc_from(const char *regions, + size_t size, dma_addr_t alignment); +int cma_allocator_register(struct cma_allocator *alloc); Patches in this patchset: Marek Szyprowski (4): drivers: add Contiguous Memory Allocator X86: integrate CMA with DMA-mapping subsystem ARM: integrate CMA with DMA-mapping subsystem ARM: Samsung: use CMA for 2 memory banks for s5p-mfc device Michal Nazarewicz (7): mm: page_alloc: handle MIGRATE_ISOLATE in free_pcppages_bulk() mm: compaction: introduce isolate_{free,migrate}pages_range(). mm: mmzone: introduce zone_pfn_same_memmap() mm: compaction: export some of the functions mm: page_alloc: introduce alloc_contig_range() mm: mmzone: MIGRATE_CMA migration type added mm: page_isolation: MIGRATE_CMA isolation functions added Documentation/kernel-parameters.txt | 9 + arch/Kconfig | 3 + arch/arm/Kconfig | 2 + arch/arm/include/asm/dma-contiguous.h | 16 ++ arch/arm/include/asm/mach/map.h | 1 + arch/arm/kernel/setup.c | 8 +- arch/arm/mm/dma-mapping.c | 368 +++++++++++++++++++++++++------ arch/arm/mm/init.c | 20 ++- arch/arm/mm/mm.h | 3 + arch/arm/mm/mmu.c | 29 ++- arch/arm/plat-s5p/dev-mfc.c | 51 +---- arch/x86/Kconfig | 1 + arch/x86/include/asm/dma-contiguous.h | 13 + arch/x86/include/asm/dma-mapping.h | 4 + arch/x86/kernel/pci-dma.c | 18 ++- arch/x86/kernel/pci-nommu.c | 8 +- arch/x86/kernel/setup.c | 2 + drivers/base/Kconfig | 89 ++++++++ drivers/base/Makefile | 1 + drivers/base/dma-contiguous.c | 396 +++++++++++++++++++++++++++++++++ include/asm-generic/dma-contiguous.h | 27 +++ include/linux/device.h | 4 + include/linux/dma-contiguous.h | 110 +++++++++ include/linux/mmzone.h | 57 ++++- include/linux/page-isolation.h | 27 ++- mm/Kconfig | 2 +- mm/Makefile | 3 +- mm/compaction.c | 230 +++++++++++-------- mm/internal.h | 35 +++ mm/memory-failure.c | 2 +- mm/memory_hotplug.c | 6 +- mm/page_alloc.c | 315 ++++++++++++++++++++++++-- mm/page_isolation.c | 15 +- 33 files changed, 1591 insertions(+), 284 deletions(-) create mode 100644 arch/arm/include/asm/dma-contiguous.h create mode 100644 arch/x86/include/asm/dma-contiguous.h create mode 100644 drivers/base/dma-contiguous.c create mode 100644 include/asm-generic/dma-contiguous.h create mode 100644 include/linux/dma-contiguous.h -- 1.7.1.569.g6f426

14 years, 2 months

CMA test driver for snowball (patch, doc and LAVA)

by Benjamin Gaignard

Hello, I have wrote a test for CMA, it use a board specific driver in association with a script in userland. This test allow us to test buffer allocation/release on snowball. The test is now running (locally) on LAVA. I have put more documentation, patches and LAVA test description here : https://wiki.linaro.org/OfficeofCTO/MemoryManagement/Validation/CMATest The blueprint for this stuff is: https://blueprints.launchpad.net/linaro-mm-sig/+spec/engr-umm-cma-debug Next steps are: - run this test on LAVA farm boards. - write test drivers for other boards. Regards, Benjamin -- Benjamin Gaignard Multimedia Working Group Linaro.org <http://www.linaro.org/>* **│ *Open source software for ARM SoCs ** Follow *Linaro: *Facebook <http://www.facebook.com/pages/Linaro> | Twitter<http://twitter.com/#!/linaroorg> | Blog <http://www.linaro.org/linaro-blog/>

14 years, 3 months

[PATCH 0/8 v3] ARM: DMA-mapping framework redesign

by Marek Szyprowski

Hello, This is another update on my attempt on DMA-mapping framework redesign. I focused mainly on the IOMMU mapper for ARM DMA-mapping implementation. DMA-mapping patches have been rebased onto Linux v3.1-rc9-next kernel with CMA v16 patches already applied. I've also integrated the code provided by Krishna Reddy and added the missing methods for IOMMU DMA mapper. The code has been tested on Samsung Exynos4 board. Here is the link to the initial version of the DMA-mapping redesign patches: http://www.spinics.net/lists/linux-mm/msg21241.html Second version of the patches: http://lists.linaro.org/pipermail/linaro-mm-sig/2011-September/000571.html http://lists.linaro.org/pipermail/linaro-mm-sig/2011-September/000577.html TODO: - start the discussion about chaning alloc_coherent into alloc_attrs in dma_map_ops structure. GIT tree will all the patches: http://git.infradead.org/users/kmpark/linux-2.6-samsung/shortlog/refs/heads… git://git.infradead.org/users/kmpark/linux-2.6-samsung dma-mapping-v4 Best regards -- Marek Szyprowski Samsung Poland R&D Center Patch summary: Marek Szyprowski (8): ARM: dma-mapping: remove offset parameter to prepare for generic dma_ops ARM: dma-mapping: use asm-generic/dma-mapping-common.h ARM: dma-mapping: implement dma sg methods on top of any generic dma ops ARM: dma-mapping: move all dma bounce code to separate dma ops structure ARM: dma-mapping: remove redundant code and cleanup common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs ARM: dma-mapping: use alloc, mmap, free from dma_ops ARM: dma-mapping: add support for IOMMU mapper arch/arm/Kconfig | 9 + arch/arm/common/dmabounce.c | 78 +++- arch/arm/include/asm/device.h | 5 + arch/arm/include/asm/dma-iommu.h | 35 ++ arch/arm/include/asm/dma-mapping.h | 403 +++++------------ arch/arm/mm/dma-mapping.c | 869 +++++++++++++++++++++++++++++++----- arch/arm/mm/vmregion.h | 2 +- include/linux/dma-attrs.h | 1 + include/linux/dma-mapping.h | 13 +- 9 files changed, 973 insertions(+), 442 deletions(-) create mode 100644 arch/arm/include/asm/dma-iommu.h -- 1.7.1.569.g6f426

14 years, 3 months

[RFC 0/2] Introduce dma buffer sharing mechanism

by Sumit Semwal

Hello Everyone, Various subsystems - V4L2, GPU-accessors, DRI to name a few - have felt the need to have a common mechanism to share memory buffers across different devices - ARM, video hardware, GPU. This need comes forth from a variety of use cases including cameras, image processing, video recorders, sound processing, DMA engines, GPU and display buffers, and others. This RFC is the first attempt in defining such a buffer sharing mechanism- it is the result of discussions from a couple of memory-management mini-summits held by Linaro to understand and address common needs around memory management. [1] A new dma_buf buffer object is added, with operations and API to allow easy sharing of this buffer object across devices. The framework allows: - a new buffer-object to be created with fixed size. - different devices to 'attach' themselves to this buffer, to facilitate backing storage negotiation, using dma_buf_attach() API. - association of a file pointer with each user-buffer and associated allocator-defined operations on that buffer. This operation is called the 'export' operation. - this exported buffer-object to be shared with the other entity by asking for its 'file-descriptor (fd)', and sharing the fd across. - a received fd to get the buffer object back, where it can be accessed using the associated exporter-defined operations. - the exporter and user to share the scatterlist using get_scatterlist and put_scatterlist operations. Documentation present in the patch-set gives more details. This is based on design suggestions from many people at the mini-summits, most notably from Arnd Bergmann <arnd(a)arndb.de>, Rob Clark <rob(a)ti.com> and Daniel Vetter <daniel(a)ffwll.ch>. The implementation is inspired from proof-of-concept patch-set from Tomasz Stanislawski <t.stanislaws(a)samsung.com>, who demonstrated buffer sharing between two v4l2 devices. [2] References: [1]: https://wiki.linaro.org/OfficeofCTO/MemoryManagement [2]: http://lwn.net/Articles/454389 Sumit Semwal (2): dma-buf: Introduce dma buffer sharing mechanism dma-buf: Documentation for buffer sharing framework Documentation/dma-buf-sharing.txt | 210 ++++++++++++++++++++++++++++++++ drivers/base/Kconfig | 10 ++ drivers/base/Makefile | 1 + drivers/base/dma-buf.c | 242 +++++++++++++++++++++++++++++++++++++ include/linux/dma-buf.h | 162 +++++++++++++++++++++++++ 5 files changed, 625 insertions(+), 0 deletions(-) create mode 100644 Documentation/dma-buf-sharing.txt create mode 100644 drivers/base/dma-buf.c create mode 100644 include/linux/dma-buf.h -- 1.7.4.1

14 years, 3 months

[PATCH] add debug trace to CMA

by Benjamin Gaignard

Hello, The goal of those two patches is to add debug and trace capabilities to CMA on going development. The first patch allow to dump CMA bitmap status by a simple "cat /sys/kernel/debug/cma" command line. The second add events trace points that can be used for performance and/or log with trace tools: - to enable it "echo 1 > /sys/kernel/debug/tracing/events/cma/enable" - to get the log "cat /sys/kernel/debug/tracing/events/trace" Regards, Benjamin -- Benjamin Gaignard Multimedia Working Group Linaro.org <http://www.linaro.org/>* **│ *Open source software for ARM SoCs ** Follow *Linaro: *Facebook <http://www.facebook.com/pages/Linaro> | Twitter<http://twitter.com/#!/linaroorg> | Blog <http://www.linaro.org/linaro-blog/>

14 years, 3 months

CMA v16 and DMA-mapping v13 patch series

by Marek Szyprowski

Hello everyone, It looks that the last patch series from me was not clearly described in terms of their kernel base. Selecting a '-next' kernel as a base was not the best idea. I'm really sorry for the confusion. I've rebased again these series and prepared 3 new branches. Feel free to download and give them a try. Here are the kernel trees with latest version of the patches, ready to use: Linux v3.1-rc10 with CMA v16 (and a few fixes): git://git.infradead.org/users/kmpark/linux-2.6-samsung 3.1-rc10-cma-v16 Linux v3.1-rc10 with DMA mapping v3 (with DMA-IOMMU integration): git://git.infradead.org/users/kmpark/linux-2.6-samsung 3.1-rc10-dma-v3 Linux v3.1-rc10 with both CMA v16 and DMA-mapping v3: git://git.infradead.org/users/kmpark/linux-2.6-samsung 3.1-rc10-cma-v16-dma-v3 Best regards -- Marek Szyprowski Samsung Poland R&D Center The above message is intended solely for the named addressee and may contain trade secret, industrial technology or privileged and confidential information otherwise protected under applicable law. Any unauthorized dissemination, distribution, copying or use of the information contained in this communication is strictly prohibited. If you have received this communication in error, please notify sender by email and delete this communication immediately. Powyższa wiadomość przeznaczona jest wyłącznie dla adresata niniejszej wiadomości i może zawierać informacje będące tajemnicą handlową, tajemnicą przedsiębiorstwa oraz informacje o charakterze poufnym chronione obowiązującymi przepisami prawa. Jakiekolwiek nieuprawnione ich rozpowszechnianie, dystrybucja, kopiowanie lub użycie informacji zawartych w powyższej wiadomości jest zabronione. Jeśli otrzymałeś powyższą wiadomość omyłkowo, uprzejmie proszę poinformuj o tym fakcie drogą mailową nadawcę tej wiadomości oraz niezwłocznie usuń powyższą wiadomość ze swojego komputera.

14 years, 3 months

[PATCHv16 0/9] Contiguous Memory Allocator

by Marek Szyprowski

Welcome everyone again, Once again I decided to post an updated version of the Contiguous Memory Allocator patches. This version provides mainly a bugfix for a very rare issue that might have changed migration type of the CMA page blocks resulting in dropping CMA features from the affected page block and causing memory allocation to fail. Also the issue reported by Dave Hansen has been fixed. This version also introduces basic support for x86 architecture, what allows wide testing on KVM/QEMU emulators and all common x86 boxes. I hope this will result in wider testing, comments and easier merging to mainline. I've also dropped an examplary patch for s5p-fimc platform device private memory declaration and added the one from real life. CMA device private memory regions are defined for s5p-mfc device to let it allocate buffers from two memory banks. ARM integration code has not been changed since last version, it provides implementation of all the ideas that has been discussed during Linaro Sprint meeting. Here are the details: This version provides a solution for complete integration of CMA to DMA mapping subsystem on ARM architecture. The issue caused by double dma pages mapping and possible aliasing in coherent memory mapping has been finally resolved, both for GFP_ATOMIC case (allocations comes from coherent memory pool) and non-GFP_ATOMIC case (allocations comes from CMA managed areas). For coherent, nommu, ARMv4 and ARMv5 systems the current DMA-mapping implementation has been kept. For ARMv6+ systems, CMA has been enabled and a special pool of coherent memory for atomic allocations has been created. The size of this pool defaults to DEFAULT_CONSISTEN_DMA_SIZE/8, but can be changed with coherent_pool kernel parameter (if really required). All atomic allocations are served from this pool. I've did a little simplification here, because there is no separate pool for writecombine memory - such requests are also served from coherent pool. I don't think that such simplification is a problem here - I found no driver that use dma_alloc_writecombine with GFP_ATOMIC flags. All non-atomic allocation are served from CMA area. Kernel mapping is updated to reflect required memory attributes changes. This is possible because during early boot, all CMA area are remapped with 4KiB pages in kernel low-memory. This version have been tested on Samsung S5PC110 based Goni machine and Exynos4 UniversalC210 board with various V4L2 multimedia drivers. Coherent atomic allocations has been tested by manually enabling the dma bounce for the s3c-sdhci device. All patches are prepared for Linux Kernel next-20111005, which is based on v3.1-rc8. I hope that patch 1-7 can be first merged to linux-mm kernel tree to enable testing them in linux-next. Then, the ARM related patches 8-9 can be scheduled for merging. A few words for these who see CMA for the first time: The Contiguous Memory Allocator (CMA) makes it possible for device drivers to allocate big contiguous chunks of memory after the system has booted. The main difference from the similar frameworks is the fact that CMA allows to transparently reuse memory region reserved for the big chunk allocation as a system memory, so no memory is wasted when no big chunk is allocated. Once the alloc request is issued, the framework will migrate system pages to create a required big chunk of physically contiguous memory. For more information you can refer to nice LWN articles: http://lwn.net/Articles/447405/ and http://lwn.net/Articles/450286/ as well as links to previous versions of the CMA framework. The CMA framework has been initially developed by Michal Nazarewicz at Samsung Poland R&D Center. Since version 9, I've taken over the development, because Michal has left the company. TODO (optional): - implement support for contiguous memory areas placed in HIGHMEM zone Best regards Marek Szyprowski Samsung Poland R&D Center Links to previous versions of the patchset: v15: <http://www.spinics.net/lists/linux-mm/msg23365.html> v14: <http://www.spinics.net/lists/linux-media/msg36536.html> v13: (internal, intentionally not released) v12: <http://www.spinics.net/lists/linux-media/msg35674.html> v11: <http://www.spinics.net/lists/linux-mm/msg21868.html> v10: <http://www.spinics.net/lists/linux-mm/msg20761.html> v9: <http://article.gmane.org/gmane.linux.kernel.mm/60787> v8: <http://article.gmane.org/gmane.linux.kernel.mm/56855> v7: <http://article.gmane.org/gmane.linux.kernel.mm/55626> v6: <http://article.gmane.org/gmane.linux.kernel.mm/55626> v5: (intentionally left out as CMA v5 was identical to CMA v4) v4: <http://article.gmane.org/gmane.linux.kernel.mm/52010> v3: <http://article.gmane.org/gmane.linux.kernel.mm/51573> v2: <http://article.gmane.org/gmane.linux.kernel.mm/50986> v1: <http://article.gmane.org/gmane.linux.kernel.mm/50669> Changelog: v16: 1. merged a fixup from Michal Nazarewicz to address comments from Dave Hansen about checking if pfns belong to the same memory zone 2. merged a fix from Michal Nazarewicz for incorrect handling of pages which belong to page block that is in MIGRATE_ISOLATE state, in very rare cases the migrate type of page block might have been changed from MIGRATE_CMA to MIGRATE_MOVABLE because of this bug 3. moved some common code to include/asm-generic 4. added support for x86 DMA-mapping framework for pci-dma hardware, CMA can be now even more widely tested on KVM/QEMU and a lot of common x86 boxes 5. rebased onto next-20111005 kernel tree, which includes changes in ARM DMA-mapping subsystem (CONSISTENT_DMA_SIZE removal) 6. removed patch for CMA s5p-fimc device private regions (served only as example) and provided the one that matches real life case - s5p-mfc device v15: 1. fixed calculation of the total memory after activating CMA area (was broken from v12) 2. more code cleanup in drivers/base/dma-contiguous.c 3. added address limit for default CMA area 4. rewrote ARM DMA integration: - removed "ARM: DMA: steal memory for DMA coherent mappings" patch - kept current DMA mapping implementation for coherent, nommu and ARMv4/ARMv5 systems - enabled CMA for all ARMv6+ systems - added separate, small pool for coherent atomic allocations, defaults to CONSISTENT_DMA_SIZE/8, but can be changed with kernel parameter coherent_pool=[size] v14: 1. Merged with "ARM: DMA: steal memory for DMA coherent mappings" patch, added support for GFP_ATOMIC allocations. 2. Added checks for NULL device pointer v13: (internal, intentionally not released) v12: 1. Fixed 2 nasty bugs in dma-contiguous allocator: - alignment argument was not passed correctly - range for dma_release_from_contiguous was not checked correctly 2. Added support for architecture specfic dma_contiguous_early_fixup() function 3. CMA and DMA-mapping integration for ARM architechture has been rewritten to take care of the memory aliasing issue that might happen for newer ARM CPUs (mapping of the same pages with different cache attributes is forbidden). TODO: add support for GFP_ATOMIC allocations basing on the "ARM: DMA: steal memory for DMA coherent mappings" patch and implement support for contiguous memory areas that are placed in HIGHMEM zone v11: 1. Removed genalloc usage and replaced it with direct calls to bitmap_* functions, dropped patches that are not needed anymore (genalloc extensions) 2. Moved all contiguous area management code from mm/cma.c to drivers/base/dma-contiguous.c 3. Renamed cm_alloc/free to dma_alloc/release_from_contiguous 4. Introduced global, system wide (default) contiguous area configured with kernel config and kernel cmdline parameters 5. Simplified initialization to just one function: dma_declare_contiguous() 6. Added example of device private memory contiguous area v10: 1. Rebased onto 3.0-rc2 and resolved all conflicts 2. Simplified CMA to be just a pure memory allocator, for use with platfrom/bus specific subsystems, like dma-mapping. Removed all device specific functions are calls. 3. Integrated with ARM DMA-mapping subsystem. 4. Code cleanup here and there. 5. Removed private context support. v9: 1. Rebased onto 2.6.39-rc1 and resolved all conflicts 2. Fixed a bunch of nasty bugs that happened when the allocation failed (mainly kernel oops due to NULL ptr dereference). 3. Introduced testing code: cma-regions compatibility layer and videobuf2-cma memory allocator module. v8: 1. The alloc_contig_range() function has now been separated from CMA and put in page_allocator.c. This function tries to migrate all LRU pages in specified range and then allocate the range using alloc_contig_freed_pages(). 2. Support for MIGRATE_CMA has been separated from the CMA code. I have not tested if CMA works with ZONE_MOVABLE but I see no reasons why it shouldn't. 3. I have added a @private argument when creating CMA contexts so that one can reserve memory and not share it with the rest of the system. This way, CMA acts only as allocation algorithm. v7: 1. A lot of functionality that handled driver->allocator_context mapping has been removed from the patchset. This is not to say that this code is not needed, it's just not worth posting everything in one patchset. Currently, CMA is "just" an allocator. It uses it's own migratetype (MIGRATE_CMA) for defining ranges of pageblokcs which behave just like ZONE_MOVABLE but dispite the latter can be put in arbitrary places. 2. The migration code that was introduced in the previous version actually started working. v6: 1. Most importantly, v6 introduces support for memory migration. The implementation is not yet complete though. Migration support means that when CMA is not using memory reserved for it, page allocator can allocate pages from it. When CMA wants to use the memory, the pages have to be moved and/or evicted as to make room for CMA. To make it possible it must be guaranteed that only movable and reclaimable pages are allocated in CMA controlled regions. This is done by introducing a MIGRATE_CMA migrate type that guarantees exactly that. Some of the migration code is "borrowed" from Kamezawa Hiroyuki's alloc_contig_pages() implementation. The main difference is that thanks to MIGRATE_CMA migrate type CMA assumes that memory controlled by CMA are is always movable or reclaimable so that it makes allocation decisions regardless of the whether some pages are actually allocated and migrates them if needed. The most interesting patches from the patchset that implement the functionality are: 09/13: mm: alloc_contig_free_pages() added 10/13: mm: MIGRATE_CMA migration type added 11/13: mm: MIGRATE_CMA isolation functions added 12/13: mm: cma: Migration support added [wip] Currently, kernel panics in some situations which I am trying to investigate. 2. cma_pin() and cma_unpin() functions has been added (after a conversation with Johan Mossberg). The idea is that whenever hardware does not use the memory (no transaction is on) the chunk can be moved around. This would allow defragmentation to be implemented if desired. No defragmentation algorithm is provided at this time. 3. Sysfs support has been replaced with debugfs. I always felt unsure about the sysfs interface and when Greg KH pointed it out I finally got to rewrite it to debugfs. v5: (intentionally left out as CMA v5 was identical to CMA v4) v4: 1. The "asterisk" flag has been removed in favour of requiring that platform will provide a "*=<regions>" rule in the map attribute. 2. The terminology has been changed slightly renaming "kind" to "type" of memory. In the previous revisions, the documentation indicated that device drivers define memory kinds and now, v3: 1. The command line parameters have been removed (and moved to a separate patch, the fourth one). As a consequence, the cma_set_defaults() function has been changed -- it no longer accepts a string with list of regions but an array of regions. 2. The "asterisk" attribute has been removed. Now, each region has an "asterisk" flag which lets one specify whether this region should by considered "asterisk" region. 3. SysFS support has been moved to a separate patch (the third one in the series) and now also includes list of regions. v2: 1. The "cma_map" command line have been removed. In exchange, a SysFS entry has been created under kernel/mm/contiguous. The intended way of specifying the attributes is a cma_set_defaults() function called by platform initialisation code. "regions" attribute (the string specified by "cma" command line parameter) can be overwritten with command line parameter; the other attributes can be changed during run-time using the SysFS entries. 2. The behaviour of the "map" attribute has been modified slightly. Currently, if no rule matches given device it is assigned regions specified by the "asterisk" attribute. It is by default built from the region names given in "regions" attribute. 3. Devices can register private regions as well as regions that can be shared but are not reserved using standard CMA mechanisms. A private region has no name and can be accessed only by devices that have the pointer to it. 4. The way allocators are registered has changed. Currently, a cma_allocator_register() function is used for that purpose. Moreover, allocators are attached to regions the first time memory is registered from the region or when allocator is registered which means that allocators can be dynamic modules that are loaded after the kernel booted (of course, it won't be possible to allocate a chunk of memory from a region if allocator is not loaded). 5. Index of new functions: +static inline dma_addr_t __must_check +cma_alloc_from(const char *regions, size_t size, + dma_addr_t alignment) +static inline int +cma_info_about(struct cma_info *info, const const char *regions) +int __must_check cma_region_register(struct cma_region *reg); +dma_addr_t __must_check +cma_alloc_from_region(struct cma_region *reg, + size_t size, dma_addr_t alignment); +static inline dma_addr_t __must_check +cma_alloc_from(const char *regions, + size_t size, dma_addr_t alignment); +int cma_allocator_register(struct cma_allocator *alloc); Patches in this patchset: mm: move some functions from memory_hotplug.c to page_isolation.c mm: alloc_contig_freed_pages() added Code "stolen" from Kamezawa. The first patch just moves code around and the second provide function for "allocates" already freed memory. mm: alloc_contig_range() added This is what Kamezawa asked: a function that tries to migrate all pages from given range and then use alloc_contig_freed_pages() (defined by the previous commit) to allocate those pages. mm: MIGRATE_CMA migration type added mm: MIGRATE_CMA isolation functions added Introduction of the new migratetype and support for it in CMA. MIGRATE_CMA works similar to ZONE_MOVABLE expect almost any memory range can be marked as one. mm: cma: Contiguous Memory Allocator added The code CMA code. Manages CMA contexts and performs memory allocations. X86: integrate CMA with DMA-mapping subsystem ARM: integrate CMA with dma-mapping subsystem Main clients of CMA framework. CMA serves as a alloc_pages() replacement. ARM: Samsung: use CMA for 2 memory banks for s5p-mfc device Use CMA device private memory regions instead of custom solution based on memblock_reserve() + dma_declare_coherent(). Patch summary: KAMEZAWA Hiroyuki (2): mm: move some functions from memory_hotplug.c to page_isolation.c mm: alloc_contig_freed_pages() added Marek Szyprowski (4): drivers: add Contiguous Memory Allocator ARM: integrate CMA with DMA-mapping subsystem ARM: Samsung: use CMA for 2 memory banks for s5p-mfc device X86: integrate CMA with DMA-mapping subsystem Michal Nazarewicz (3): mm: alloc_contig_range() added mm: MIGRATE_CMA migration type added mm: MIGRATE_CMA isolation functions added arch/Kconfig | 3 + arch/arm/Kconfig | 2 + arch/arm/include/asm/dma-contiguous.h | 16 ++ arch/arm/include/asm/mach/map.h | 1 + arch/arm/mm/dma-mapping.c | 362 +++++++++++++++++++++++++------ arch/arm/mm/init.c | 8 + arch/arm/mm/mm.h | 3 + arch/arm/mm/mmu.c | 29 ++- arch/arm/plat-s5p/dev-mfc.c | 51 +---- arch/x86/Kconfig | 1 + arch/x86/include/asm/dma-contiguous.h | 13 + arch/x86/include/asm/dma-mapping.h | 4 + arch/x86/kernel/pci-dma.c | 18 ++- arch/x86/kernel/pci-nommu.c | 8 +- arch/x86/kernel/setup.c | 2 + drivers/base/Kconfig | 79 +++++++ drivers/base/Makefile | 1 + drivers/base/dma-contiguous.c | 386 +++++++++++++++++++++++++++++++++ include/asm-generic/dma-contiguous.h | 27 +++ include/linux/device.h | 4 + include/linux/dma-contiguous.h | 106 +++++++++ include/linux/mmzone.h | 57 +++++- include/linux/page-isolation.h | 53 ++++- mm/Kconfig | 8 +- mm/compaction.c | 10 + mm/memory_hotplug.c | 111 ---------- mm/page_alloc.c | 317 +++++++++++++++++++++++++-- mm/page_isolation.c | 131 +++++++++++- 28 files changed, 1522 insertions(+), 289 deletions(-) create mode 100644 arch/arm/include/asm/dma-contiguous.h create mode 100644 arch/x86/include/asm/dma-contiguous.h create mode 100644 drivers/base/dma-contiguous.c create mode 100644 include/asm-generic/dma-contiguous.h create mode 100644 include/linux/dma-contiguous.h -- 1.7.1.569.g6f426

14 years, 4 months

Message could not be delivered

by tzicchang＠sun.epa.gov.tw

The original message was received at Thu, 3 Nov 2011 12:25:58 +0300 from sun.epa.gov.tw [25.14.172.233] ----- The following addresses had permanent fatal errors ----- linaro-mm-sig(a)lists.linaro.org ----- Transcript of the session follows ----- ... while talking to lists.linaro.org.: 554 Service unavailable; [152.79.124.186] blocked using bl.spamcop.net Session aborted

14 years, 4 months

Returned mail: see transcript for details

by morshed＠ammsbd.com

Dear user of lists.linaro.org, We have received reports that your account has been used to send a huge amount of spam messages during the recent week. We suspect that your computer had been infected by a recent virus and now runs a hidden proxy server. We recommend that you follow instructions in order to keep your computer safe. Have a nice day, lists.linaro.org user support team.

14 years, 4 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig