Linaro-mm-sig

linaro-mm-sig@lists.linaro.org

19 participants
7032 discussions

Re: [PATCH v3 1/2] dt-bindings: npu: Add Arm Ethos-U65/U85

by Rob Herring

On Mon, Sep 29, 2025 at 1:54 PM Frank Li <Frank.li(a)nxp.com> wrote: > > On Fri, Sep 26, 2025 at 03:00:48PM -0500, Rob Herring (Arm) wrote: > > Add a binding schema for Arm Ethos-U65/U85 NPU. The Arm Ethos-U NPUs are > > designed for edge AI inference applications. > > > > Signed-off-by: Rob Herring (Arm) <robh(a)kernel.org> > > --- > > .../devicetree/bindings/npu/arm,ethos.yaml | 79 ++++++++++++++++++++++ > > 1 file changed, 79 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/npu/arm,ethos.yaml b/Documentation/devicetree/bindings/npu/arm,ethos.yaml > > new file mode 100644 > > index 000000000000..716c4997f976 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/npu/arm,ethos.yaml > > @@ -0,0 +1,79 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/npu/arm,ethos.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Arm Ethos U65/U85 > > + > > +maintainers: > > + - Rob Herring <robh(a)kernel.org> > > + > > +description: > > > + The Arm Ethos-U NPUs are designed for IoT inference applications. The NPUs > > + can accelerate 8-bit and 16-bit integer quantized networks: > > + > > + Transformer networks (U85 only) > > + Convolutional Neural Networks (CNN) > > + Recurrent Neural Networks (RNN) > > + > > + Further documentation is available here: > > + > > + U65 TRM: https://developer.arm.com/documentation/102023/ > > + U85 TRM: https://developer.arm.com/documentation/102685/ > > + > > +properties: > > + compatible: > > + oneOf: > > + - items: > > + - enum: > > + - fsl,imx93-npu > > + - const: arm,ethos-u65 > > + - items: > > + - {} > > what's means {} here ?, just not allow arm,ethos-u85 alone? Yes, u85 support is currently on a FVP model. The naming for it isn't really clear yet nor is it clear if it ever will be. So really just a placeholder until there is a chip using it. It keeps folks from using just the fallback. > > Reviewed-by: Frank Li <Frank.Li(a)nxp.com> Thanks, Rob

10 months, 1 week

Re: [PATCH] dma-buf: use SB_I_NOEXEC and SB_I_NODEV

by Christoph Hellwig

On Tue, Oct 07, 2025 at 11:10:32PM -0700, Kees Cook wrote: > The dma-buf pseudo-filesystem should never have executable mappings nor > device nodes. Set SB_I_NOEXEC and SB_I_NODEV on the superblock to enforce > this at the filesystem level, similar to secretmem, commit 98f99394a104 > ("secretmem: use SB_I_NOEXEC"). > > Fix the syzbot-reported warning from the exec code to enforce this > requirement: Can you please just enforce this in init_pseudo? If a file system really wants to support devices or executable it can clear them, but a quick grep suggests that none of them should.

10 months, 1 week

Re: [PATCH v17 35/47] i2c: rename wait_for_completion callback to wait_for_completion_cb

by Wolfram Sang

On Thu, Oct 02, 2025 at 05:12:35PM +0900, Byungchul Park wrote: > Functionally no change. This patch is a preparation for DEPT(DEPendency > Tracker) to track dependencies related to a scheduler API, > wait_for_completion(). > > Unfortunately, struct i2c_algo_pca_data has a callback member named > wait_for_completion, that is the same as the scheduler API, which makes > it hard to change the scheduler API to a macro form because of the > ambiguity. > > Add a postfix _cb to the callback member to remove the ambiguity. > > Signed-off-by: Byungchul Park <byungchul(a)sk.com> This patch seems reasonable in any case. I'll pick it, so you have one dependency less. Good luck with the series! Applied to for-next, thanks!

10 months, 2 weeks

Re: [PATCH v17 09/47] arm64, dept: add support CONFIG_ARCH_HAS_DEPT_SUPPORT to arm64

by Mark Brown

On Fri, Oct 03, 2025 at 10:46:41AM +0900, Byungchul Park wrote: > On Thu, Oct 02, 2025 at 12:39:31PM +0100, Mark Brown wrote: > > On Thu, Oct 02, 2025 at 05:12:09PM +0900, Byungchul Park wrote: > > > dept needs to notice every entrance from user to kernel mode to treat > > > every kernel context independently when tracking wait-event dependencies. > > > Roughly, system call and user oriented fault are the cases. > > > Make dept aware of the entrances of arm64 and add support > > > CONFIG_ARCH_HAS_DEPT_SUPPORT to arm64. > > The description of what needs to be tracked probably needs some > > tightening up here, it's not clear to me for example why exceptions for > > mops or the vector extensions aren't included here, or what the > > distinction is with error faults like BTI or GCS not being tracked? > Thanks for the feedback but I'm afraid I don't get you. Can you explain > in more detail with example? Your commit log says we need to track every entrance from user mode to kernel mode but the code only adds tracking to syscalls and some memory faults. The exception types listed above (and some others) also result in entries to the kernel from userspace. > JFYI, pairs of wait and its event need to be tracked to see if each > event can be prevented from being reachable by other waits like: > context X context Y > > lock L > ... > initiate event A context start toward event A > ... ... > wait A // wait for event A and lock L // wait for unlock L and > // prevent unlock L // prevent event A > ... ... > unlock L unlock L > ... > event A > I meant things like this need to be tracked. I don't think that's at all clear from the above context, and the handling for some of the above exception types (eg, the vector extensions) includes taking locks.

10 months, 2 weeks

Re: [PATCH v17 28/47] dept: add documentation for dept

by Bagas Sanjaya

On Thu, Oct 02, 2025 at 05:12:28PM +0900, Byungchul Park wrote: > This document describes the concept and APIs of dept. > > Signed-off-by: Byungchul Park <byungchul(a)sk.com> > --- > Documentation/dependency/dept.txt | 735 ++++++++++++++++++++++++++ > Documentation/dependency/dept_api.txt | 117 ++++ > 2 files changed, 852 insertions(+) > create mode 100644 Documentation/dependency/dept.txt > create mode 100644 Documentation/dependency/dept_api.txt What about writing dept docs in reST (like the rest of kernel documentation)? ---- >8 ---- diff --git a/Documentation/dependency/dept.txt b/Documentation/locking/dept.rst similarity index 92% rename from Documentation/dependency/dept.txt rename to Documentation/locking/dept.rst index 5dd358b96734e6..7b90a0d95f0876 100644 --- a/Documentation/dependency/dept.txt +++ b/Documentation/locking/dept.rst @@ -8,7 +8,7 @@ How lockdep works Lockdep detects a deadlock by checking lock acquisition order. For example, a graph to track acquisition order built by lockdep might look -like: +like:: A -> B - \ @@ -16,12 +16,12 @@ like: / C -> D - - where 'A -> B' means that acquisition A is prior to acquisition B - with A still held. +where 'A -> B' means that acquisition A is prior to acquisition B +with A still held. Lockdep keeps adding each new acquisition order into the graph in runtime. For example, 'E -> C' will be added when the two locks have -been acquired in the order, E and then C. The graph will look like: +been acquired in the order, E and then C. The graph will look like:: A -> B - \ @@ -32,10 +32,10 @@ been acquired in the order, E and then C. The graph will look like: \ / ------------------ - where 'A -> B' means that acquisition A is prior to acquisition B - with A still held. +where 'A -> B' means that acquisition A is prior to acquisition B +with A still held. -This graph contains a subgraph that demonstrates a loop like: +This graph contains a subgraph that demonstrates a loop like:: -> E - / \ @@ -67,6 +67,8 @@ mechanisms, lockdep doesn't work. Can lockdep detect the following deadlock? +:: + context X context Y context Z mutex_lock A @@ -80,6 +82,8 @@ Can lockdep detect the following deadlock? No. What about the following? +:: + context X context Y mutex_lock A @@ -101,7 +105,7 @@ What leads a deadlock --------------------- A deadlock occurs when one or multi contexts are waiting for events that -will never happen. For example: +will never happen. For example:: context X context Y context Z @@ -121,24 +125,24 @@ We call this *deadlock*. If an event occurrence is a prerequisite to reaching another event, we call it *dependency*. In this example: - Event A occurrence is a prerequisite to reaching event C. - Event C occurrence is a prerequisite to reaching event B. - Event B occurrence is a prerequisite to reaching event A. + * Event A occurrence is a prerequisite to reaching event C. + * Event C occurrence is a prerequisite to reaching event B. + * Event B occurrence is a prerequisite to reaching event A. In terms of dependency: - Event C depends on event A. - Event B depends on event C. - Event A depends on event B. + * Event C depends on event A. + * Event B depends on event C. + * Event A depends on event B. -Dependency graph reflecting this example will look like: +Dependency graph reflecting this example will look like:: -> C -> A -> B - / \ \ / ---------------- - where 'A -> B' means that event A depends on event B. +where 'A -> B' means that event A depends on event B. A circular dependency exists. Such a circular dependency leads a deadlock since no waiters can have desired events triggered. @@ -152,7 +156,7 @@ Introduce DEPT -------------- DEPT(DEPendency Tracker) tracks wait and event instead of lock -acquisition order so as to recognize the following situation: +acquisition order so as to recognize the following situation:: context X context Y context Z @@ -165,18 +169,18 @@ acquisition order so as to recognize the following situation: event A and builds up a dependency graph in runtime that is similar to lockdep. -The graph might look like: +The graph might look like:: -> C -> A -> B - / \ \ / ---------------- - where 'A -> B' means that event A depends on event B. +where 'A -> B' means that event A depends on event B. DEPT keeps adding each new dependency into the graph in runtime. For example, 'B -> D' will be added when event D occurrence is a -prerequisite to reaching event B like: +prerequisite to reaching event B like:: | v @@ -184,7 +188,7 @@ prerequisite to reaching event B like: . event B -After the addition, the graph will look like: +After the addition, the graph will look like:: -> D / @@ -209,6 +213,8 @@ How DEPT works Let's take a look how DEPT works with the 1st example in the section 'Limitation of lockdep'. +:: + context X context Y context Z mutex_lock A @@ -220,7 +226,7 @@ Let's take a look how DEPT works with the 1st example in the section mutex_unlock A mutex_unlock A -Adding comments to describe DEPT's view in terms of wait and event: +Adding comments to describe DEPT's view in terms of wait and event:: context X context Y context Z @@ -248,7 +254,7 @@ Adding comments to describe DEPT's view in terms of wait and event: mutex_unlock A /* event A */ -Adding more supplementary comments to describe DEPT's view in detail: +Adding more supplementary comments to describe DEPT's view in detail:: context X context Y context Z @@ -283,7 +289,7 @@ Adding more supplementary comments to describe DEPT's view in detail: mutex_unlock A /* event A that's been valid since 4 */ -Let's build up dependency graph with this example. Firstly, context X: +Let's build up dependency graph with this example. Firstly, context X:: context X @@ -292,7 +298,7 @@ Let's build up dependency graph with this example. Firstly, context X: /* start to take into account event B's context */ /* 2 */ -There are no events to create dependency. Next, context Y: +There are no events to create dependency. Next, context Y:: context Y @@ -317,13 +323,13 @@ waits between 3 and the event, event B does not create dependency. For event A, there is a wait, folio_lock B, between 1 and the event. Which means event A cannot be triggered if event B does not wake up the wait. Therefore, we can say event A depends on event B, say, 'A -> B'. The -graph will look like after adding the dependency: +graph will look like after adding the dependency:: A -> B - where 'A -> B' means that event A depends on event B. +where 'A -> B' means that event A depends on event B. -Lastly, context Z: +Lastly, context Z:: context Z @@ -343,7 +349,7 @@ wait, mutex_lock A, between 2 and the event - remind 2 is at a very start and before the wait in timeline. Which means event B cannot be triggered if event A does not wake up the wait. Therefore, we can say event B depends on event A, say, 'B -> A'. The graph will look like -after adding the dependency: +after adding the dependency:: -> A -> B - / \ @@ -367,6 +373,8 @@ Interpret DEPT report The following is the example in the section 'How DEPT works'. +:: + context X context Y context Z mutex_lock A @@ -402,7 +410,7 @@ The following is the example in the section 'How DEPT works'. We can Simplify this by replacing each waiting point with [W], each point where its event's context starts with [S] and each event with [E]. -This example will look like after the replacement: +This example will look like after the replacement:: context X context Y context Z @@ -419,6 +427,8 @@ This example will look like after the replacement: DEPT uses the symbols [W], [S] and [E] in its report as described above. The following is an example reported by DEPT for a real problem. +:: + Link: https://lore.kernel.org/lkml/6383cde5-cf4b-facf-6e07-1378a485657d@I-love.SA… Link: https://lore.kernel.org/lkml/1674268856-31807-1-git-send-email-byungchul.pa… @@ -620,6 +630,8 @@ The following is an example reported by DEPT for a real problem. Let's take a look at the summary that is the most important part. +:: + --------------------------------------------------- summary --------------------------------------------------- @@ -639,7 +651,7 @@ Let's take a look at the summary that is the most important part. [W]: the wait blocked [E]: the event not reachable -The summary shows the following scenario: +The summary shows the following scenario:: context A context B context ?(unknown) @@ -652,7 +664,7 @@ The summary shows the following scenario: [E] unlock(&ni->ni_lock:0) -Adding supplementary comments to describe DEPT's view in detail: +Adding supplementary comments to describe DEPT's view in detail:: context A context B context ?(unknown) @@ -677,7 +689,7 @@ Adding supplementary comments to describe DEPT's view in detail: [E] unlock(&ni->ni_lock:0) /* event that's been valid since 2 */ -Let's build up dependency graph with this report. Firstly, context A: +Let's build up dependency graph with this report. Firstly, context A:: context A @@ -697,13 +709,13 @@ wait, folio_lock(&f1), between 2 and the event. Which means unlock(&ni->ni_lock:0) is not reachable if folio_unlock(&f1) does not wake up the wait. Therefore, we can say unlock(&ni->ni_lock:0) depends on folio_unlock(&f1), say, 'unlock(&ni->ni_lock:0) -> folio_unlock(&f1)'. -The graph will look like after adding the dependency: +The graph will look like after adding the dependency:: unlock(&ni->ni_lock:0) -> folio_unlock(&f1) - where 'A -> B' means that event A depends on event B. +where 'A -> B' means that event A depends on event B. -Secondly, context B: +Secondly, context B:: context B @@ -719,14 +731,14 @@ very start and before the wait in timeline. Which means folio_unlock(&f1) is not reachable if unlock(&ni->ni_lock:0) does not wake up the wait. Therefore, we can say folio_unlock(&f1) depends on unlock(&ni->ni_lock:0), say, 'folio_unlock(&f1) -> unlock(&ni->ni_lock:0)'. The graph will look -like after adding the dependency: +like after adding the dependency:: -> unlock(&ni->ni_lock:0) -> folio_unlock(&f1) - / \ \ / ------------------------------------------------ - where 'A -> B' means that event A depends on event B. +where 'A -> B' means that event A depends on event B. A new loop has been created. So DEPT can report it as a deadlock! Cool! diff --git a/Documentation/dependency/dept_api.txt b/Documentation/locking/dept_api.rst similarity index 97% rename from Documentation/dependency/dept_api.txt rename to Documentation/locking/dept_api.rst index 8e0d5a118a460e..96c4d65f4a9a2d 100644 --- a/Documentation/dependency/dept_api.txt +++ b/Documentation/locking/dept_api.rst @@ -10,6 +10,8 @@ already applied into the existing synchronization primitives e.g. waitqueue, swait, wait_for_completion(), dma fence and so on. The basic APIs of SDT are: +.. code-block:: c + /* * After defining 'struct dept_map map', initialize the instance. */ @@ -27,6 +29,8 @@ APIs of SDT are: The advanced APIs of SDT are: +.. code-block:: c + /* * After defining 'struct dept_map map', initialize the instance * using an external key. @@ -83,6 +87,8 @@ Do not use these APIs directly. These are the wrappers for typical locks, that have been already applied into major locks internally e.g. spin lock, mutex, rwlock and so on. The APIs of LDT are: +.. code-block:: c + ldt_init(map, key, sub, name); ldt_lock(map, sub_local, try, nest, ip); ldt_rlock(map, sub_local, try, nest, ip, queued); @@ -96,6 +102,8 @@ Raw APIs -------- Do not use these APIs directly. The raw APIs of dept are: +.. code-block:: c + dept_free_range(start, size); dept_map_init(map, key, sub, name); dept_map_reinit(map, key, sub, name); diff --git a/Documentation/locking/index.rst b/Documentation/locking/index.rst index 6a9ea96c8bcb70..7ec3dce7fee425 100644 --- a/Documentation/locking/index.rst +++ b/Documentation/locking/index.rst @@ -24,6 +24,8 @@ Locking percpu-rw-semaphore robust-futexes robust-futex-ABI + dept + dept_api .. only:: subproject and html > +Can lockdep detect the following deadlock? > + > + context X context Y context Z > + > + mutex_lock A > + folio_lock B > + folio_lock B <- DEADLOCK > + mutex_lock A <- DEADLOCK > + folio_unlock B > + folio_unlock B > + mutex_unlock A > + mutex_unlock A > + > +No. What about the following? > + > + context X context Y > + > + mutex_lock A > + mutex_lock A <- DEADLOCK > + wait_for_complete B <- DEADLOCK > + complete B > + mutex_unlock A > + mutex_unlock A Can you explain how DEPT detects deadlock on the second example above (like the first one being described in "How DEPT works" section)? Confused... -- An old man doll... just what I always wanted! - Clara

10 months, 2 weeks

Re: [PATCH v12 2/9] dma-buf: dma-heap: export declared functions

by John Stultz

On Thu, Oct 2, 2025 at 12:47 AM Maxime Ripard <mripard(a)redhat.com> wrote: > On Thu, Sep 11, 2025 at 03:49:43PM +0200, Jens Wiklander wrote: > > Export the dma-buf heap functions to allow them to be used by the OP-TEE > > driver. The OP-TEE driver wants to register and manage specific secure > > DMA heaps with it. > > > > Reviewed-by: Sumit Garg <sumit.garg(a)oss.qualcomm.com> > > Reviewed-by: T.J. Mercier <tjmercier(a)google.com> > > Acked-by: Sumit Semwal <sumit.semwal(a)linaro.org> > > Signed-off-by: Jens Wiklander <jens.wiklander(a)linaro.org> > > --- > > drivers/dma-buf/dma-heap.c | 4 ++++ > > 1 file changed, 4 insertions(+) > > > > diff --git a/drivers/dma-buf/dma-heap.c b/drivers/dma-buf/dma-heap.c > > index 3cbe87d4a464..8ab49924f8b7 100644 > > --- a/drivers/dma-buf/dma-heap.c > > +++ b/drivers/dma-buf/dma-heap.c > > @@ -11,6 +11,7 @@ > > #include <linux/dma-buf.h> > > #include <linux/dma-heap.h> > > #include <linux/err.h> > > +#include <linux/export.h> > > #include <linux/list.h> > > #include <linux/nospec.h> > > #include <linux/syscalls.h> > > @@ -202,6 +203,7 @@ void *dma_heap_get_drvdata(struct dma_heap *heap) > > { > > return heap->priv; > > } > > +EXPORT_SYMBOL_NS_GPL(dma_heap_get_drvdata, "DMA_BUF_HEAP"); > > > > /** > > * dma_heap_get_name - get heap name > > @@ -214,6 +216,7 @@ const char *dma_heap_get_name(struct dma_heap *heap) > > { > > return heap->name; > > } > > +EXPORT_SYMBOL_NS_GPL(dma_heap_get_name, "DMA_BUF_HEAP"); > > > > /** > > * dma_heap_add - adds a heap to dmabuf heaps > > @@ -303,6 +306,7 @@ struct dma_heap *dma_heap_add(const struct dma_heap_export_info *exp_info) > > kfree(heap); > > return err_ret; > > } > > +EXPORT_SYMBOL_NS_GPL(dma_heap_add, "DMA_BUF_HEAP"); > > It's not clear to me why we would need to export those symbols. > > As far as I know, heaps cannot be removed, and compiling them as module > means that we would be able to remove them. > > Now, if we don't expect the users to be compiled as modules, then we > don't need to export these symbols at all. > > Am I missing something? For things like distro kernels (or in Android's case, the GKI), there's a benefit for modules that can be loaded permanently (not having a module_exit hook). One doesn't have to bloat the base kernel image/memory usage for everyone, while still not having to necessarily deal with complications from module unloading issues. thanks -john

10 months, 2 weeks

Re: [PATCH v12 3/9] tee: implement protected DMA-heap

by Jens Wiklander

Hi, On Thu, Oct 2, 2025 at 9:54 AM Maxime Ripard <mripard(a)redhat.com> wrote: > > On Thu, Sep 11, 2025 at 03:49:44PM +0200, Jens Wiklander wrote: > > +static const char *heap_id_2_name(enum tee_dma_heap_id id) > > +{ > > + switch (id) { > > + case TEE_DMA_HEAP_SECURE_VIDEO_PLAY: > > + return "protected,secure-video"; > > + case TEE_DMA_HEAP_TRUSTED_UI: > > + return "protected,trusted-ui"; > > + case TEE_DMA_HEAP_SECURE_VIDEO_RECORD: > > + return "protected,secure-video-record"; > > + default: > > + return NULL; > > + } > > +} > > We've recently agreed on a naming guideline (even though it's not merged yet) > > https://lore.kernel.org/r/20250728-dma-buf-heap-names-doc-v4-1-f73f71cf0dfd… I wasn't aware of that (or had forgotten it), but during the revisions of this patch set, we changed to use "protected". > > Secure and trusted should be defined I guess, because secure and > protected at least seem redundant to me. Depending on the use case, the protected buffer is only accessible to a specific set of devices. This is typically configured by the TEE firmware based on which heap we're using. To distinguish between the different heaps, I've simply added the name of the use case after the comma. So the name of the heap for the Trusted-UI use case is "protected,trusted-ui". What would a heap called "protected,ui" represent? Protected buffers for a UI use case? What kind of UI use case? If the name of the heap is too generic, it might cover more than one use case with conflicting requirements for which devices should be able to access the protected memory. Thanks, Jens

10 months, 2 weeks

Re: [PATCH v12 2/9] dma-buf: dma-heap: export declared functions

by Nicolas Dufresne

Le jeudi 02 octobre 2025 à 09:47 +0200, Maxime Ripard a écrit : > Hi, > > On Thu, Sep 11, 2025 at 03:49:43PM +0200, Jens Wiklander wrote: > > Export the dma-buf heap functions to allow them to be used by the OP-TEE > > driver. The OP-TEE driver wants to register and manage specific secure > > DMA heaps with it. > > > > Reviewed-by: Sumit Garg <sumit.garg(a)oss.qualcomm.com> > > Reviewed-by: T.J. Mercier <tjmercier(a)google.com> > > Acked-by: Sumit Semwal <sumit.semwal(a)linaro.org> > > Signed-off-by: Jens Wiklander <jens.wiklander(a)linaro.org> > > --- > > drivers/dma-buf/dma-heap.c | 4 ++++ > > 1 file changed, 4 insertions(+) > > > > diff --git a/drivers/dma-buf/dma-heap.c b/drivers/dma-buf/dma-heap.c > > index 3cbe87d4a464..8ab49924f8b7 100644 > > --- a/drivers/dma-buf/dma-heap.c > > +++ b/drivers/dma-buf/dma-heap.c > > @@ -11,6 +11,7 @@ > > #include <linux/dma-buf.h> > > #include <linux/dma-heap.h> > > #include <linux/err.h> > > +#include <linux/export.h> > > #include <linux/list.h> > > #include <linux/nospec.h> > > #include <linux/syscalls.h> > > @@ -202,6 +203,7 @@ void *dma_heap_get_drvdata(struct dma_heap *heap) > > { > > return heap->priv; > > } > > +EXPORT_SYMBOL_NS_GPL(dma_heap_get_drvdata, "DMA_BUF_HEAP"); > > > > /** > > * dma_heap_get_name - get heap name > > @@ -214,6 +216,7 @@ const char *dma_heap_get_name(struct dma_heap *heap) > > { > > return heap->name; > > } > > +EXPORT_SYMBOL_NS_GPL(dma_heap_get_name, "DMA_BUF_HEAP"); > > > > /** > > * dma_heap_add - adds a heap to dmabuf heaps > > @@ -303,6 +306,7 @@ struct dma_heap *dma_heap_add(const struct > > dma_heap_export_info *exp_info) > > kfree(heap); > > return err_ret; > > } > > +EXPORT_SYMBOL_NS_GPL(dma_heap_add, "DMA_BUF_HEAP"); > > It's not clear to me why we would need to export those symbols. > > As far as I know, heaps cannot be removed, and compiling them as module > means that we would be able to remove them. > > Now, if we don't expect the users to be compiled as modules, then we > don't need to export these symbols at all. Maybe I'm getting out of topic, sorry if its the case, but making that a hard rule seems very limiting. Didn't we said that a heap driver could be made to represent memory region on a remote device such as an eGPU ? Nicolas > > Am I missing something? > > Maxime

10 months, 2 weeks

Re: [PATCH v12 2/9] dma-buf: dma-heap: export declared functions

by Jens Wiklander

Hi, On Thu, Oct 2, 2025 at 9:47 AM Maxime Ripard <mripard(a)redhat.com> wrote: > > Hi, > > On Thu, Sep 11, 2025 at 03:49:43PM +0200, Jens Wiklander wrote: > > Export the dma-buf heap functions to allow them to be used by the OP-TEE > > driver. The OP-TEE driver wants to register and manage specific secure > > DMA heaps with it. > > > > Reviewed-by: Sumit Garg <sumit.garg(a)oss.qualcomm.com> > > Reviewed-by: T.J. Mercier <tjmercier(a)google.com> > > Acked-by: Sumit Semwal <sumit.semwal(a)linaro.org> > > Signed-off-by: Jens Wiklander <jens.wiklander(a)linaro.org> > > --- > > drivers/dma-buf/dma-heap.c | 4 ++++ > > 1 file changed, 4 insertions(+) > > > > diff --git a/drivers/dma-buf/dma-heap.c b/drivers/dma-buf/dma-heap.c > > index 3cbe87d4a464..8ab49924f8b7 100644 > > --- a/drivers/dma-buf/dma-heap.c > > +++ b/drivers/dma-buf/dma-heap.c > > @@ -11,6 +11,7 @@ > > #include <linux/dma-buf.h> > > #include <linux/dma-heap.h> > > #include <linux/err.h> > > +#include <linux/export.h> > > #include <linux/list.h> > > #include <linux/nospec.h> > > #include <linux/syscalls.h> > > @@ -202,6 +203,7 @@ void *dma_heap_get_drvdata(struct dma_heap *heap) > > { > > return heap->priv; > > } > > +EXPORT_SYMBOL_NS_GPL(dma_heap_get_drvdata, "DMA_BUF_HEAP"); > > > > /** > > * dma_heap_get_name - get heap name > > @@ -214,6 +216,7 @@ const char *dma_heap_get_name(struct dma_heap *heap) > > { > > return heap->name; > > } > > +EXPORT_SYMBOL_NS_GPL(dma_heap_get_name, "DMA_BUF_HEAP"); > > > > /** > > * dma_heap_add - adds a heap to dmabuf heaps > > @@ -303,6 +306,7 @@ struct dma_heap *dma_heap_add(const struct dma_heap_export_info *exp_info) > > kfree(heap); > > return err_ret; > > } > > +EXPORT_SYMBOL_NS_GPL(dma_heap_add, "DMA_BUF_HEAP"); > > It's not clear to me why we would need to export those symbols. > > As far as I know, heaps cannot be removed, and compiling them as module > means that we would be able to remove them. > > Now, if we don't expect the users to be compiled as modules, then we > don't need to export these symbols at all. > > Am I missing something? In this case, it's the TEE module that _might_ need to instantiate a DMA heap. Whether it will be instantiated depends on the TEE backend driver and the TEE firmware. If a heap is instantiated, then it will not be possible to unload the TEE module. That might not be perfect, but in my opinion, it's better than other options, such as always making the TEE subsystem built-in or disabling DMA-heap support when compiled as a module. Thanks, Jens

10 months, 2 weeks

Re: [PATCH v17 09/47] arm64, dept: add support CONFIG_ARCH_HAS_DEPT_SUPPORT to arm64

by Mark Brown

On Thu, Oct 02, 2025 at 05:12:09PM +0900, Byungchul Park wrote: > dept needs to notice every entrance from user to kernel mode to treat > every kernel context independently when tracking wait-event dependencies. > Roughly, system call and user oriented fault are the cases. > > Make dept aware of the entrances of arm64 and add support > CONFIG_ARCH_HAS_DEPT_SUPPORT to arm64. The description of what needs to be tracked probably needs some tightening up here, it's not clear to me for example why exceptions for mops or the vector extensions aren't included here, or what the distinction is with error faults like BTI or GCS not being tracked?

10 months, 2 weeks

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig