Linaro-mm-sig

linaro-mm-sig@lists.linaro.org

6 participants
3320 discussions

by Laura Abbott

I never saw any feedback or action on these patches so this is a resend. Probably hit the window when everyone was busy/traveling. --- Hi, This is some clean up of old Ion interfaces and APIs. These are interfaces that mostly existed before dma_buf was well integrated into the kernel along with reservations for board files. If there are objections to deletion I expect it to turn into a discussion about what other APIs need to be extended. Thanks, Laura Laura Abbott (5): staging: android: ion: Get rid of ion_sg_table staging: android: ion: Drop ion_phys interface staging: android: ion: Get rid of map_dma/unmap_dma staging: android: ion: Drop ion_carveout_allocate definitions staging: android: ion: Get rid of ion_reserve drivers/staging/android/ion/ion.c | 103 ++---------------------- drivers/staging/android/ion/ion.h | 41 ---------- drivers/staging/android/ion/ion_carveout_heap.c | 33 +------- drivers/staging/android/ion/ion_chunk_heap.c | 17 +--- drivers/staging/android/ion/ion_cma_heap.c | 34 +------- drivers/staging/android/ion/ion_priv.h | 30 +------ drivers/staging/android/ion/ion_system_heap.c | 44 +--------- 7 files changed, 19 insertions(+), 283 deletions(-) -- 2.5.5

9 years, 5 months

[RFC 0/4] doc: dma-buf: sphinx conversion and cleanup

by Sumit Semwal

Convert dma-buf documentation over to sphinx; also cleanup to address sphinx warnings. While at that, convert dma-buf-sharing.txt as well, and make it the dma-buf API guide. There is no content change yet; only format conversion and creation of some hyperlinks. Sumit Semwal (4): dma-buf/fence: kerneldoc: remove unused struct members dma-buf/fence: kerneldoc: remove spurious section header Documentation: move dma-buf documentation to rst Documentation/sphinx: link dma-buf rsts Documentation/DocBook/device-drivers.tmpl | 37 --- Documentation/dma-buf/guide.rst | 503 ++++++++++++++++++++++++++++++ Documentation/dma-buf/intro.rst | 76 +++++ Documentation/index.rst | 2 + MAINTAINERS | 2 +- include/linux/fence.h | 4 +- 6 files changed, 583 insertions(+), 41 deletions(-) create mode 100644 Documentation/dma-buf/guide.rst create mode 100644 Documentation/dma-buf/intro.rst -- 2.7.4

9 years, 5 months

[RFC 0/4] doc: dma-buf: sphinx conversion and cleanup

by Sumit Semwal

9 years, 5 months

Re: [Linaro-mm-sig] [RFCv2][PATCH 2/5] arm: Implement ARCH_HAS_FORCE_CACHE

by Laura Abbott

On 08/09/2016 02:56 PM, Florian Fainelli wrote: > On 08/08/2016 10:49 AM, Laura Abbott wrote: >> arm may need the kernel_force_cache APIs to guarantee data consistency. >> Implement versions of these APIs based on the DMA APIs. >> >> Signed-off-by: Laura Abbott <labbott(a)redhat.com> >> --- >> arch/arm/include/asm/cacheflush.h | 4 ++ >> arch/arm/mm/dma-mapping.c | 119 -------------------------------------- >> arch/arm/mm/flush.c | 115 ++++++++++++++++++++++++++++++++++++ > > Why is the code moved between dma-mapping.c and flush.c? It was not > obvious while looking at these patches why this is needed. > I wanted to use the cache flushing routines from dma-mapping.c and it seemed better to pull them out vs. trying to put more generic cache flushing code in dma-mapping.c. flush.c seemed like an appropriate place although I forgot about the dependency on CONFIG_MMU. It can certainly remain in dma-mapping.c if deemed appropriate. Thanks, Laura

9 years, 6 months

[PATCH v8 0/4] Generic zpos property

by Benjamin Gaignard

version 8: move drm_blend.o from drm-y to drm_kms_helper-y to avoid EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos) remove dead function declarations in drm_crtc.h rebased code on drm-next + merge of git://linuxtv.org/media_tree.git vsp1 branch. version 7: remove useless EXPORT_SYMBOL() better z-order wording in Documentation rebased code on drm-next + merge of git://linuxtv.org/media_tree.git vsp1 branch. vsp1 branch might be merged into 4.8-rc1 so conflits between rcar-du and zpos patches should be avoid in this version 7. version 6: add zpos in Documentation/gpu/kms-properties.csv merge Ville's patch (splitted between all the commits) it simplify the API and fix bug. Thanks version 5: rebased on drm-next where Documentation/DocBook/gpu.tmpl doesn't exist anymore. rework sti patch because some plane functions have changed since v4 version 4: make sure that normalized zpos value is stay in the defined property range and warn user if not. Fix NULL pointer bug in rcar-du while setting zpos value. No changes in the other drivers. version 3: use kmalloc_array instead of kmalloc. Correct normalize_zpos computation (comeback to Mareck original code) version 2: add a zpos property into drm_plane structure to simplify code. This allow to get/set zpos value in core and not in drivers code. Fix various remarks. version 1: refactor Marek's patches to have per plane zpos property instead of only one in core. Benjamin Gaignard (2): drm: sti: use generic zpos for plane drm: rcar: use generic code for managing zpos plane property Marek Szyprowski (2): drm: add generic zpos property drm/exynos: use generic code for managing zpos plane property Documentation/gpu/kms-properties.csv | 1 + drivers/gpu/drm/Makefile | 2 +- drivers/gpu/drm/drm_atomic.c | 4 + drivers/gpu/drm/drm_atomic_helper.c | 7 + drivers/gpu/drm/drm_blend.c | 238 ++++++++++++++++++++++++++++++ drivers/gpu/drm/drm_crtc_internal.h | 4 + drivers/gpu/drm/exynos/exynos_drm_drv.h | 2 - drivers/gpu/drm/exynos/exynos_drm_plane.c | 67 ++------- drivers/gpu/drm/exynos/exynos_mixer.c | 6 +- drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 2 +- drivers/gpu/drm/rcar-du/rcar_du_drv.h | 1 - drivers/gpu/drm/rcar-du/rcar_du_kms.c | 5 - drivers/gpu/drm/rcar-du/rcar_du_plane.c | 9 +- drivers/gpu/drm/rcar-du/rcar_du_plane.h | 2 - drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 14 +- drivers/gpu/drm/sti/sti_cursor.c | 4 +- drivers/gpu/drm/sti/sti_gdp.c | 4 +- drivers/gpu/drm/sti/sti_hqvdp.c | 4 +- drivers/gpu/drm/sti/sti_mixer.c | 9 +- drivers/gpu/drm/sti/sti_plane.c | 78 ++++------ drivers/gpu/drm/sti/sti_plane.h | 7 +- include/drm/drm_crtc.h | 20 +++ 22 files changed, 334 insertions(+), 156 deletions(-) create mode 100644 drivers/gpu/drm/drm_blend.c -- 1.9.1

9 years, 6 months

Re: [Linaro-mm-sig] [PATCH v7 1/4] drm: add generic zpos property

by Benjamin Gaignard

2016-07-28 14:55 GMT+02:00 Emil Velikov <emil.l.velikov(a)gmail.com>: > Hi Benjamin, > > Just spotted a couple of small bits which, imho, should be fine with > squashing with follow up patch(es). > > On 28 July 2016 at 09:07, Benjamin Gaignard > <benjamin.gaignard(a)linaro.org> wrote: > >> +EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos); > The symbols is internal only thus the EXPORT_SYMBOL notation isn't needed. > Rule of thumb - interfaces used by other modules are declared in > include/drm and the symbol(s) should be annotated with EXPORT_SYMBOL* > drm_blend.c is linked into drm.o while drm_atomic_helper_normalize_zpos is used in drm_atomic_helper.c linked within drm_kms_helper.o so EXPORT_SYMBOL is need either I got linked error while compiling drm as a module >> + >> +int drm_plane_atomic_set_zpos_property(struct drm_plane *plane, >> + struct drm_plane_state *state, >> + struct drm_property *property, >> + uint64_t val); >> + >> +int drm_plane_atomic_get_zpos_property(struct drm_plane *plane, >> + const struct drm_plane_state *state, >> + struct drm_property *property, >> + uint64_t *val); >> + > Dead code/declarations ? > yes dead code, I will remove it. > Cheers, > Emil Thanks, Benjamin -- Benjamin Gaignard Graphic Study Group Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog

9 years, 6 months

[PATCH v7 0/4] Generic zpos property

by Benjamin Gaignard

version 7: remove useless EXPORT_SYMBOL() better z-order wording in Documentation rebased code on drm-next + merge of git://linuxtv.org/media_tree.git vsp1 branch. vsp1 branch might be merged into 4.8-rc1 so conflits between rcar-du and zpos patches should be avoid in this version 7. version 6: add zpos in Documentation/gpu/kms-properties.csv merge Ville's patch (splitted between all the commits) it simplify the API and fix bug. Thanks version 5: rebased on drm-next where Documentation/DocBook/gpu.tmpl doesn't exist anymore. rework sti patch because some plane functions have changed since v4 version 4: make sure that normalized zpos value is stay in the defined property range and warn user if not. Fix NULL pointer bug in rcar-du while setting zpos value. No changes in the other drivers. version 3: use kmalloc_array instead of kmalloc. Correct normalize_zpos computation (comeback to Mareck original code) version 2: add a zpos property into drm_plane structure to simplify code. This allow to get/set zpos value in core and not in drivers code. Fix various remarks. version 1: refactor Marek's patches to have per plane zpos property instead of only one in core. Benjamin Gaignard (2): drm: sti: use generic zpos for plane drm: rcar: use generic code for managing zpos plane property Marek Szyprowski (2): drm: add generic zpos property drm/exynos: use generic code for managing zpos plane property Documentation/gpu/kms-properties.csv | 1 + drivers/gpu/drm/Makefile | 2 +- drivers/gpu/drm/drm_atomic.c | 4 + drivers/gpu/drm/drm_atomic_helper.c | 7 + drivers/gpu/drm/drm_blend.c | 239 ++++++++++++++++++++++++++++++ drivers/gpu/drm/drm_crtc_internal.h | 4 + drivers/gpu/drm/exynos/exynos_drm_drv.h | 2 - drivers/gpu/drm/exynos/exynos_drm_plane.c | 67 ++------- drivers/gpu/drm/exynos/exynos_mixer.c | 6 +- drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 2 +- drivers/gpu/drm/rcar-du/rcar_du_drv.h | 1 - drivers/gpu/drm/rcar-du/rcar_du_kms.c | 5 - drivers/gpu/drm/rcar-du/rcar_du_plane.c | 9 +- drivers/gpu/drm/rcar-du/rcar_du_plane.h | 2 - drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 14 +- drivers/gpu/drm/sti/sti_cursor.c | 4 +- drivers/gpu/drm/sti/sti_gdp.c | 4 +- drivers/gpu/drm/sti/sti_hqvdp.c | 4 +- drivers/gpu/drm/sti/sti_mixer.c | 9 +- drivers/gpu/drm/sti/sti_plane.c | 78 ++++------ drivers/gpu/drm/sti/sti_plane.h | 7 +- include/drm/drm_crtc.h | 30 ++++ 22 files changed, 345 insertions(+), 156 deletions(-) create mode 100644 drivers/gpu/drm/drm_blend.c -- 1.9.1

9 years, 6 months

[PATCH v6 0/4] Generic zpos property

by Benjamin Gaignard

version 6: add zpos in Documentation/gpu/kms-properties.csv merge Ville's patch (splitted between all the commits) it simplify the API and fix bug. Thanks version 5: rebased on drm-next where Documentation/DocBook/gpu.tmpl doesn't exist anymore. rework sti patch because some plane functions have changed since v4 version 4: make sure that normalized zpos value is stay in the defined property range and warn user if not. Fix NULL pointer bug in rcar-du while setting zpos value. No changes in the other drivers. version 3: use kmalloc_array instead of kmalloc. Correct normalize_zpos computation (comeback to Mareck original code) version 2: add a zpos property into drm_plane structure to simplify code. This allow to get/set zpos value in core and not in drivers code. Fix various remarks. version 1: refactor Marek's patches to have per plane zpos property instead of only one in core. Benjamin Gaignard (2): drm: sti: use generic zpos for plane drm: rcar: use generic code for managing zpos plane property Marek Szyprowski (2): drm: add generic zpos property drm/exynos: use generic code for managing zpos plane property Documentation/gpu/kms-properties.csv | 1 + drivers/gpu/drm/Makefile | 2 +- drivers/gpu/drm/drm_atomic.c | 4 + drivers/gpu/drm/drm_atomic_helper.c | 7 + drivers/gpu/drm/drm_blend.c | 240 ++++++++++++++++++++++++++++++ drivers/gpu/drm/drm_crtc_internal.h | 4 + drivers/gpu/drm/exynos/exynos_drm_drv.h | 2 - drivers/gpu/drm/exynos/exynos_drm_plane.c | 67 ++------- drivers/gpu/drm/exynos/exynos_mixer.c | 6 +- drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 2 +- drivers/gpu/drm/rcar-du/rcar_du_drv.h | 1 - drivers/gpu/drm/rcar-du/rcar_du_kms.c | 5 - drivers/gpu/drm/rcar-du/rcar_du_plane.c | 9 +- drivers/gpu/drm/rcar-du/rcar_du_plane.h | 2 - drivers/gpu/drm/sti/sti_cursor.c | 4 +- drivers/gpu/drm/sti/sti_gdp.c | 4 +- drivers/gpu/drm/sti/sti_hqvdp.c | 4 +- drivers/gpu/drm/sti/sti_mixer.c | 9 +- drivers/gpu/drm/sti/sti_plane.c | 78 ++++------ drivers/gpu/drm/sti/sti_plane.h | 7 +- include/drm/drm_crtc.h | 30 ++++ 21 files changed, 341 insertions(+), 147 deletions(-) create mode 100644 drivers/gpu/drm/drm_blend.c Cc: Inki Dae <inki.dae(a)samsung.com> Cc: Daniel Vetter <daniel(a)ffwll.ch> Cc: Ville Syrjala <ville.syrjala(a)linux.intel.com> Cc: Joonyoung Shim <jy0922.shim(a)samsung.com> Cc: Seung-Woo Kim <sw0312.kim(a)samsung.com> Cc: Andrzej Hajda <a.hajda(a)samsung.com> Cc: Krzysztof Kozlowski <k.kozlowski(a)samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie(a)samsung.com> Cc: Tobias Jakobi <tjakobi(a)math.uni-bielefeld.de> Cc: Gustavo Padovan <gustavo(a)padovan.org> Cc: vincent.abriou(a)st.com Cc: fabien.dessenne(a)st.com Cc: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> -- 1.9.1

9 years, 6 months

[PATCH v6 4/4] drm: rcar: use generic code for managing zpos plane property

by Benjamin Gaignard

version 6: rebased patch on top rcar-du changes for zpos version 4: fix null pointer issue while setting zpos in plane reset function This patch replaces zpos property handling custom code in rcar DRM driver with calls to generic DRM code. Signed-off-by: Benjamin Gaignard <benjamin.gaignard(a)linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Cc: Daniel Vetter <daniel(a)ffwll.ch> Cc: Ville Syrjala <ville.syrjala(a)linux.intel.com> Cc: Marek Szyprowski <m.szyprowski(a)samsung.com> --- drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 2 +- drivers/gpu/drm/rcar-du/rcar_du_drv.h | 1 - drivers/gpu/drm/rcar-du/rcar_du_kms.c | 5 ----- drivers/gpu/drm/rcar-du/rcar_du_plane.c | 9 ++------- drivers/gpu/drm/rcar-du/rcar_du_plane.h | 2 -- drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 5 ++++- 6 files changed, 7 insertions(+), 17 deletions(-) diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c index e39fcef..7316fc7 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c @@ -196,7 +196,7 @@ void rcar_du_crtc_route_output(struct drm_crtc *crtc, static unsigned int plane_zpos(struct rcar_du_plane *plane) { - return to_rcar_plane_state(plane->plane.state)->zpos; + return plane->plane.state->normalized_zpos; } static const struct rcar_du_format_info * diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.h b/drivers/gpu/drm/rcar-du/rcar_du_drv.h index ed35467..c843c31 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.h +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.h @@ -92,7 +92,6 @@ struct rcar_du_device { struct { struct drm_property *alpha; struct drm_property *colorkey; - struct drm_property *zpos; } props; unsigned int dpad0_source; diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c index 6bb032d..f03eb55 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c @@ -527,11 +527,6 @@ static int rcar_du_properties_init(struct rcar_du_device *rcdu) if (rcdu->props.colorkey == NULL) return -ENOMEM; - rcdu->props.zpos = - drm_property_create_range(rcdu->ddev, 0, "zpos", 1, 7); - if (rcdu->props.zpos == NULL) - return -ENOMEM; - return 0; } diff --git a/drivers/gpu/drm/rcar-du/rcar_du_plane.c b/drivers/gpu/drm/rcar-du/rcar_du_plane.c index bfe31ca..a74f8ed 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_plane.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_plane.c @@ -652,7 +652,7 @@ static void rcar_du_plane_reset(struct drm_plane *plane) state->source = RCAR_DU_PLANE_MEMORY; state->alpha = 255; state->colorkey = RCAR_DU_COLORKEY_NONE; - state->zpos = plane->type == DRM_PLANE_TYPE_PRIMARY ? 0 : 1; + state->state.zpos = plane->type == DRM_PLANE_TYPE_PRIMARY ? 0 : 1; plane->state = &state->state; plane->state->plane = plane; @@ -670,8 +670,6 @@ static int rcar_du_plane_atomic_set_property(struct drm_plane *plane, rstate->alpha = val; else if (property == rcdu->props.colorkey) rstate->colorkey = val; - else if (property == rcdu->props.zpos) - rstate->zpos = val; else return -EINVAL; @@ -690,8 +688,6 @@ static int rcar_du_plane_atomic_get_property(struct drm_plane *plane, *val = rstate->alpha; else if (property == rcdu->props.colorkey) *val = rstate->colorkey; - else if (property == rcdu->props.zpos) - *val = rstate->zpos; else return -EINVAL; @@ -763,8 +759,7 @@ int rcar_du_planes_init(struct rcar_du_group *rgrp) drm_object_attach_property(&plane->plane.base, rcdu->props.colorkey, RCAR_DU_COLORKEY_NONE); - drm_object_attach_property(&plane->plane.base, - rcdu->props.zpos, 1); + drm_plane_create_zpos_property(&plane->plane, 1, 1, 7); } return 0; diff --git a/drivers/gpu/drm/rcar-du/rcar_du_plane.h b/drivers/gpu/drm/rcar-du/rcar_du_plane.h index b18b7b2..8b91dd3 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_plane.h +++ b/drivers/gpu/drm/rcar-du/rcar_du_plane.h @@ -51,7 +51,6 @@ static inline struct rcar_du_plane *to_rcar_plane(struct drm_plane *plane) * @hwindex: 0-based hardware plane index, -1 means unused * @alpha: value of the plane alpha property * @colorkey: value of the plane colorkey property - * @zpos: value of the plane zpos property */ struct rcar_du_plane_state { struct drm_plane_state state; @@ -62,7 +61,6 @@ struct rcar_du_plane_state { unsigned int alpha; unsigned int colorkey; - unsigned int zpos; }; static inline struct rcar_du_plane_state * diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c index e671a7c..7e51afc 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c @@ -43,12 +43,12 @@ void rcar_du_vsp_enable(struct rcar_du_crtc *crtc) .src_y = 0, .src_w = mode->hdisplay << 16, .src_h = mode->vdisplay << 16, + .zpos = 0, }, .format = rcar_du_format_info(DRM_FORMAT_ARGB8888), .source = RCAR_DU_PLANE_VSPD1, .alpha = 255, .colorkey = 0, - .zpos = 0, }; if (rcdu->info->gen >= 3) @@ -269,6 +269,7 @@ static void rcar_du_vsp_plane_reset(struct drm_plane *plane) return; state->alpha = 255; + state->state.zpos = plane->type == DRM_PLANE_TYPE_PRIMARY ? 0 : 1; plane->state = &state->state; plane->state->plane = plane; @@ -378,6 +379,8 @@ int rcar_du_vsp_init(struct rcar_du_vsp *vsp) drm_object_attach_property(&plane->plane.base, rcdu->props.alpha, 255); + drm_plane_create_zpos_property(&plane->plane, 1, 1, + vsp->num_planes - 1); } return 0; -- 1.9.1

9 years, 6 months

[PATCH v5 0/4] Generic zpos property

by Benjamin Gaignard

version 5: rebased on drm-next where Documentation/DocBook/gpu.tmpl doesn't exist anymore. rework sti patch because some plane functions have changed since v4 version 4: make sure that normalized zpos value is stay in the defined property range and warn user if not. Fix NULL pointer bug in rcar-du while setting zpos value. No changes in the other drivers. version 3: use kmalloc_array instead of kmalloc. Correct normalize_zpos computation (comeback to Mareck original code) version 2: add a zpos property into drm_plane structure to simplify code. This allow to get/set zpos value in core and not in drivers code. Fix various remarks. version 1: refactor Marek's patches to have per plane zpos property instead of only one in core. Benjamin Gaignard (2): drm: sti: use generic zpos for plane drm: rcar: use generic code for managing zpos plane property Marek Szyprowski (2): drm: add generic zpos property drm/exynos: use generic code for managing zpos plane property drivers/gpu/drm/Makefile | 2 +- drivers/gpu/drm/drm_atomic.c | 4 + drivers/gpu/drm/drm_atomic_helper.c | 6 + drivers/gpu/drm/drm_blend.c | 227 ++++++++++++++++++++++++++++++ drivers/gpu/drm/drm_crtc_internal.h | 4 + drivers/gpu/drm/exynos/exynos_drm_drv.h | 2 - drivers/gpu/drm/exynos/exynos_drm_plane.c | 67 ++------- drivers/gpu/drm/exynos/exynos_mixer.c | 6 +- drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 2 +- drivers/gpu/drm/rcar-du/rcar_du_drv.h | 1 - drivers/gpu/drm/rcar-du/rcar_du_kms.c | 5 - drivers/gpu/drm/rcar-du/rcar_du_plane.c | 9 +- drivers/gpu/drm/rcar-du/rcar_du_plane.h | 2 - drivers/gpu/drm/sti/sti_cursor.c | 4 +- drivers/gpu/drm/sti/sti_gdp.c | 4 +- drivers/gpu/drm/sti/sti_hqvdp.c | 4 +- drivers/gpu/drm/sti/sti_mixer.c | 9 +- drivers/gpu/drm/sti/sti_plane.c | 76 ++++------ drivers/gpu/drm/sti/sti_plane.h | 7 +- include/drm/drm_crtc.h | 30 ++++ 20 files changed, 324 insertions(+), 147 deletions(-) create mode 100644 drivers/gpu/drm/drm_blend.c Cc: Inki Dae <inki.dae(a)samsung.com> Cc: Daniel Vetter <daniel(a)ffwll.ch> Cc: Ville Syrjala <ville.syrjala(a)linux.intel.com> Cc: Joonyoung Shim <jy0922.shim(a)samsung.com> Cc: Seung-Woo Kim <sw0312.kim(a)samsung.com> Cc: Andrzej Hajda <a.hajda(a)samsung.com> Cc: Krzysztof Kozlowski <k.kozlowski(a)samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie(a)samsung.com> Cc: Tobias Jakobi <tjakobi(a)math.uni-bielefeld.de> Cc: Gustavo Padovan <gustavo(a)padovan.org> Cc: vincent.abriou(a)st.com Cc: fabien.dessenne(a)st.com Cc: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> -- 1.9.1

9 years, 6 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig