Linaro-mm-sig August 2023

linaro-mm-sig@lists.linaro.org

33 participants
20 discussions

[RFC PATCH] dma-buf/dma-fence: Use a successful read_trylock() annotation for dma_fence_begin_signalling()

by Thomas Hellström

Condsider the following call sequence: /* Upper layer */ dma_fence_begin_signalling(); lock(tainted_shared_lock); /* Driver callback */ dma_fence_begin_signalling(); ... The driver might here use a utility that is annotated as intended for the dma-fence signalling critical path. Now if the upper layer isn't correctly annotated yet for whatever reason, resulting in /* Upper layer */ lock(tainted_shared_lock); /* Driver callback */ dma_fence_begin_signalling(); We will receive a false lockdep locking order violation notification from dma_fence_begin_signalling(). However entering a dma-fence signalling critical section itself doesn't block and could not cause a deadlock. So use a successful read_trylock() annotation instead for dma_fence_begin_signalling(). That will make sure that the locking order is correctly registered in the first case, and doesn't register any locking order in the second case. The alternative is of course to make sure that the "Upper layer" is always correctly annotated. But experience shows that's not easily achievable in all cases. Signed-off-by: Thomas Hellström <thomas.hellstrom(a)linux.intel.com> --- drivers/dma-buf/dma-fence.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/dma-buf/dma-fence.c b/drivers/dma-buf/dma-fence.c index f177c56269bb..17f632768ef9 100644 --- a/drivers/dma-buf/dma-fence.c +++ b/drivers/dma-buf/dma-fence.c @@ -308,8 +308,8 @@ bool dma_fence_begin_signalling(void) if (in_atomic()) return true; - /* ... and non-recursive readlock */ - lock_acquire(&dma_fence_lockdep_map, 0, 0, 1, 1, NULL, _RET_IP_); + /* ... and non-recursive successful read_trylock */ + lock_acquire(&dma_fence_lockdep_map, 0, 1, 1, 1, NULL, _RET_IP_); return false; } @@ -340,7 +340,7 @@ void __dma_fence_might_wait(void) lock_map_acquire(&dma_fence_lockdep_map); lock_map_release(&dma_fence_lockdep_map); if (tmp) - lock_acquire(&dma_fence_lockdep_map, 0, 0, 1, 1, NULL, _THIS_IP_); + lock_acquire(&dma_fence_lockdep_map, 0, 1, 1, 1, NULL, _THIS_IP_); } #endif -- 2.39.2

3 months

[PATCH] drm/shmem-helper: Remove duplicate include

by Jiapeng Chong

./drivers/gpu/drm/drm_gem_shmem_helper.c: linux/module.h is included more than once. Reported-by: Abaci Robot <abaci(a)linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4567 Signed-off-by: Jiapeng Chong <jiapeng.chong(a)linux.alibaba.com> --- drivers/gpu/drm/drm_gem_shmem_helper.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/drm_gem_shmem_helper.c b/drivers/gpu/drm/drm_gem_shmem_helper.c index 4ea6507a77e5..f401df26facf 100644 --- a/drivers/gpu/drm/drm_gem_shmem_helper.c +++ b/drivers/gpu/drm/drm_gem_shmem_helper.c @@ -10,7 +10,6 @@ #include <linux/shmem_fs.h> #include <linux/slab.h> #include <linux/vmalloc.h> -#include <linux/module.h> #ifdef CONFIG_X86 #include <asm/set_memory.h> -- 2.20.1.7.g153144c

9 months, 2 weeks

[syzbot] [dri?] KMSAN: uninit-value in drm_mode_setcrtc

by syzbot

Hello, syzbot found the following issue on: HEAD commit: 2741f1b02117 string: use __builtin_memcpy() in strlcpy/str.. git tree: https://github.com/google/kmsan.git master console+strace: https://syzkaller.appspot.com/x/log.txt?x=17bb33d1280000 kernel config: https://syzkaller.appspot.com/x/.config?x=753079601b2300f9 dashboard link: https://syzkaller.appspot.com/bug?extid=4fad2e57beb6397ab2fc compiler: Debian clang version 15.0.7, GNU ld (GNU Binutils for Debian) 2.35.2 syz repro: https://syzkaller.appspot.com/x/repro.syz?x=16d669a5280000 C reproducer: https://syzkaller.appspot.com/x/repro.c?x=14d8f095280000 Downloadable assets: disk image: https://storage.googleapis.com/syzbot-assets/ebd05512d8d7/disk-2741f1b0.raw… vmlinux: https://storage.googleapis.com/syzbot-assets/aa555b09582c/vmlinux-2741f1b0.… kernel image: https://storage.googleapis.com/syzbot-assets/5ea0934e02cc/bzImage-2741f1b0.… IMPORTANT: if you fix the issue, please add the following tag to the commit: Reported-by: syzbot+4fad2e57beb6397ab2fc(a)syzkaller.appspotmail.com ===================================================== BUG: KMSAN: uninit-value in drm_mode_setcrtc+0x1ad3/0x24a0 drivers/gpu/drm/drm_crtc.c:896 drm_mode_setcrtc+0x1ad3/0x24a0 drivers/gpu/drm/drm_crtc.c:896 drm_ioctl_kernel+0x5ae/0x730 drivers/gpu/drm/drm_ioctl.c:788 drm_ioctl+0xd12/0x1590 drivers/gpu/drm/drm_ioctl.c:891 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl+0x222/0x400 fs/ioctl.c:856 __x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook+0x12d/0xb60 mm/slab.h:716 slab_alloc_node mm/slub.c:3451 [inline] __kmem_cache_alloc_node+0x4ff/0x8b0 mm/slub.c:3490 __do_kmalloc_node mm/slab_common.c:965 [inline] __kmalloc+0x121/0x3c0 mm/slab_common.c:979 kmalloc_array include/linux/slab.h:596 [inline] drm_mode_setcrtc+0x1dba/0x24a0 drivers/gpu/drm/drm_crtc.c:846 drm_ioctl_kernel+0x5ae/0x730 drivers/gpu/drm/drm_ioctl.c:788 drm_ioctl+0xd12/0x1590 drivers/gpu/drm/drm_ioctl.c:891 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl+0x222/0x400 fs/ioctl.c:856 __x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 1 PID: 4955 Comm: syz-executor275 Not tainted 6.4.0-rc4-syzkaller-g2741f1b02117 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 ===================================================== --- This report is generated by a bot. It may contain errors. See https://goo.gl/tpsmEJ for more information about syzbot. syzbot engineers can be reached at syzkaller(a)googlegroups.com. syzbot will keep track of this issue. See: https://goo.gl/tpsmEJ#status for how to communicate with syzbot. If the bug is already fixed, let syzbot know by replying with: #syz fix: exact-commit-title If you want syzbot to run the reproducer, reply with: #syz test: git://repo/address.git branch-or-commit-hash If you attach or paste a git patch, syzbot will apply it before testing. If you want to change bug's subsystems, reply with: #syz set subsystems: new-subsystem (See the list of subsystem names on the web dashboard) If the bug is a duplicate of another bug, reply with: #syz dup: exact-subject-of-another-report If you want to undo deduplication, reply with: #syz undup

1 year

[RFC] drm/scheduler: Unwrap job dependencies

by Rob Clark

From: Rob Clark <robdclark(a)chromium.org> Container fences have burner contexts, which makes the trick to store at most one fence per context somewhat useless if we don't unwrap array or chain fences. Signed-off-by: Rob Clark <robdclark(a)chromium.org> --- tbh, I'm not sure why we weren't doing this already, unless there is something I'm overlooking drivers/gpu/drm/scheduler/sched_main.c | 43 +++++++++++++++++--------- 1 file changed, 28 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/scheduler/sched_main.c b/drivers/gpu/drm/scheduler/sched_main.c index c2ee44d6224b..f59e5335afbb 100644 --- a/drivers/gpu/drm/scheduler/sched_main.c +++ b/drivers/gpu/drm/scheduler/sched_main.c @@ -41,20 +41,21 @@ * 4. Entities themselves maintain a queue of jobs that will be scheduled on * the hardware. * * The jobs in a entity are always scheduled in the order that they were pushed. */ #include <linux/kthread.h> #include <linux/wait.h> #include <linux/sched.h> #include <linux/completion.h> +#include <linux/dma-fence-unwrap.h> #include <linux/dma-resv.h> #include <uapi/linux/sched/types.h> #include <drm/drm_print.h> #include <drm/drm_gem.h> #include <drm/gpu_scheduler.h> #include <drm/spsc_queue.h> #define CREATE_TRACE_POINTS #include "gpu_scheduler_trace.h" @@ -665,41 +666,27 @@ void drm_sched_job_arm(struct drm_sched_job *job) sched = entity->rq->sched; job->sched = sched; job->s_priority = entity->rq - sched->sched_rq; job->id = atomic64_inc_return(&sched->job_id_count); drm_sched_fence_init(job->s_fence, job->entity); } EXPORT_SYMBOL(drm_sched_job_arm); -/** - * drm_sched_job_add_dependency - adds the fence as a job dependency - * @job: scheduler job to add the dependencies to - * @fence: the dma_fence to add to the list of dependencies. - * - * Note that @fence is consumed in both the success and error cases. - * - * Returns: - * 0 on success, or an error on failing to expand the array. - */ -int drm_sched_job_add_dependency(struct drm_sched_job *job, - struct dma_fence *fence) +static int _add_dependency(struct drm_sched_job *job, struct dma_fence *fence) { struct dma_fence *entry; unsigned long index; u32 id = 0; int ret; - if (!fence) - return 0; - /* Deduplicate if we already depend on a fence from the same context. * This lets the size of the array of deps scale with the number of * engines involved, rather than the number of BOs. */ xa_for_each(&job->dependencies, index, entry) { if (entry->context != fence->context) continue; if (dma_fence_is_later(fence, entry)) { dma_fence_put(entry); @@ -709,20 +696,46 @@ int drm_sched_job_add_dependency(struct drm_sched_job *job, } return 0; } ret = xa_alloc(&job->dependencies, &id, fence, xa_limit_32b, GFP_KERNEL); if (ret != 0) dma_fence_put(fence); return ret; } + +/** + * drm_sched_job_add_dependency - adds the fence as a job dependency + * @job: scheduler job to add the dependencies to + * @fence: the dma_fence to add to the list of dependencies. + * + * Note that @fence is consumed in both the success and error cases. + * + * Returns: + * 0 on success, or an error on failing to expand the array. + */ +int drm_sched_job_add_dependency(struct drm_sched_job *job, + struct dma_fence *fence) +{ + struct dma_fence_unwrap iter; + struct dma_fence *f; + int ret = 0; + + dma_fence_unwrap_for_each (f, &iter, fence) { + ret = _add_dependency(job, f); + if (ret) + break; + } + + return ret; +} EXPORT_SYMBOL(drm_sched_job_add_dependency); /** * drm_sched_job_add_resv_dependencies - add all fences from the resv to the job * @job: scheduler job to add the dependencies to * @resv: the dma_resv object to get the fences from * @usage: the dma_resv_usage to use to filter the fences * * This adds all fences matching the given usage from @resv to @job. * Must be called with the @resv lock held. -- 2.39.2

1 year

[PATCH v9 0/3] dma-fence: Deadline awareness (uabi edition)

by Rob Clark

From: Rob Clark <robdclark(a)chromium.org> This is a re-post of the remaining patches from: https://patchwork.freedesktop.org/series/114490/ Part of the hold-up of the remaining uabi patches was compositor support, but now an MR for kwin exists: https://invent.kde.org/plasma/kwin/-/merge_requests/4358 The syncobj userspace is: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21973 v1: https://patchwork.freedesktop.org/series/93035/ v2: Move filtering out of later deadlines to fence implementation to avoid increasing the size of dma_fence v3: Add support in fence-array and fence-chain; Add some uabi to support igt tests and userspace compositors. v4: Rebase, address various comments, and add syncobj deadline support, and sync_file EPOLLPRI based on experience with perf/ freq issues with clvk compute workloads on i915 (anv) v5: Clarify that this is a hint as opposed to a more hard deadline guarantee, switch to using u64 ns values in UABI (still absolute CLOCK_MONOTONIC values), drop syncobj related cap and driver feature flag in favor of allowing count_handles==0 for probing kernel support. v6: Re-work vblank helper to calculate time of _start_ of vblank, and work correctly if the last vblank event was more than a frame ago. Add (mostly unrelated) drm/msm patch which also uses the vblank helper. Use dma_fence_chain_contained(). More verbose syncobj UABI comments. Drop DMA_FENCE_FLAG_HAS_DEADLINE_BIT. v7: Fix kbuild complaints about vblank helper. Add more docs. v8: Add patch to surface sync_file UAPI, and more docs updates. v9: Repost the remaining patches that expose new uabi to userspace. Rob Clark (3): drm/syncobj: Add deadline support for syncobj waits dma-buf/sync_file: Add SET_DEADLINE ioctl dma-buf/sw_sync: Add fence deadline support drivers/dma-buf/dma-fence.c | 3 +- drivers/dma-buf/sw_sync.c | 82 ++++++++++++++++++++++++++++++++++ drivers/dma-buf/sync_debug.h | 2 + drivers/dma-buf/sync_file.c | 19 ++++++++ drivers/gpu/drm/drm_syncobj.c | 64 ++++++++++++++++++++------ include/uapi/drm/drm.h | 17 +++++++ include/uapi/linux/sync_file.h | 22 +++++++++ 7 files changed, 195 insertions(+), 14 deletions(-) -- 2.41.0

1 year

[syzbot] [dri?] kernel BUG in vmf_insert_pfn_prot (2)

by syzbot

Hello, syzbot found the following issue on: HEAD commit: 9e6c269de404 Merge tag 'i2c-for-6.5-rc7' of git://git.kern.. git tree: upstream console+strace: https://syzkaller.appspot.com/x/log.txt?x=110b32d3a80000 kernel config: https://syzkaller.appspot.com/x/.config?x=aa796b6080b04102 dashboard link: https://syzkaller.appspot.com/bug?extid=398e17b61dab22cc56bc compiler: gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40 syz repro: https://syzkaller.appspot.com/x/repro.syz?x=14284307a80000 Downloadable assets: disk image: https://storage.googleapis.com/syzbot-assets/481d8421bfb2/disk-9e6c269d.raw… vmlinux: https://storage.googleapis.com/syzbot-assets/5ec626f94634/vmlinux-9e6c269d.… kernel image: https://storage.googleapis.com/syzbot-assets/ab1e59619bd6/bzImage-9e6c269d.… IMPORTANT: if you fix the issue, please add the following tag to the commit: Reported-by: syzbot+398e17b61dab22cc56bc(a)syzkaller.appspotmail.com ------------[ cut here ]------------ kernel BUG at mm/memory.c:2214! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 5157 Comm: syz-executor.3 Not tainted 6.5.0-rc6-syzkaller-00253-g9e6c269de404 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 RIP: 0010:vmf_insert_pfn_prot+0x247/0x430 mm/memory.c:2214 Code: 0f 0b e8 0c 4f c0 ff 49 89 ef bf 20 00 00 00 41 83 e7 28 4c 89 fe e8 88 4a c0 ff 49 83 ff 20 0f 85 aa fe ff ff e8 e9 4e c0 ff <0f> 0b 48 bd ff ff ff ff ff ff 0f 00 e8 d8 4e c0 ff 4c 89 f6 48 89 RSP: 0018:ffffc9000415f750 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8880275a0d00 RCX: 0000000000000000 RDX: ffff888018379dc0 RSI: ffffffff81c5b9b7 RDI: 0000000000000007 RBP: 000000000c140477 R08: 0000000000000007 R09: 0000000000000020 R10: 0000000000000020 R11: 000000000000001f R12: 0000000020ffc000 R13: 1ffff9200082beeb R14: 000000000007e79e R15: 0000000000000020 FS: 00007f235bd9a6c0(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020ffc000 CR3: 0000000022a32000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> drm_gem_shmem_fault+0x1ea/0x3a0 drivers/gpu/drm/drm_gem_shmem_helper.c:563 __do_fault+0x107/0x5f0 mm/memory.c:4198 do_read_fault mm/memory.c:4547 [inline] do_fault mm/memory.c:4670 [inline] do_pte_missing mm/memory.c:3664 [inline] handle_pte_fault mm/memory.c:4939 [inline] __handle_mm_fault+0x27e0/0x3b80 mm/memory.c:5079 handle_mm_fault+0x2ab/0x9d0 mm/memory.c:5233 do_user_addr_fault+0x446/0xfc0 arch/x86/mm/fault.c:1392 handle_page_fault arch/x86/mm/fault.c:1486 [inline] exc_page_fault+0x5c/0xd0 arch/x86/mm/fault.c:1542 asm_exc_page_fault+0x26/0x30 arch/x86/include/asm/idtentry.h:570 RIP: 0010:rep_movs_alternative+0x4a/0xb0 arch/x86/lib/copy_user_64.S:71 Code: 75 f1 c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 8b 06 48 89 07 48 83 c6 08 48 83 c7 08 83 e9 08 74 df 83 f9 08 73 e8 eb c9 <f3> a4 c3 0f 1f 00 4c 8b 06 4c 8b 4e 08 4c 8b 56 10 4c 8b 5e 18 4c RSP: 0018:ffffc9000415fb50 EFLAGS: 00050206 RAX: 0000000000000001 RBX: 0000000020ffc000 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000020ffc000 RDI: ffff88807b764000 RBP: 0000000000001000 R08: 0000000000000001 R09: ffffed100f6ec9ff R10: ffff88807b764fff R11: 0000000000000000 R12: 0000000020ffd000 R13: ffff88807b764000 R14: 0000000000000000 R15: 0000000020ffc000 copy_user_generic arch/x86/include/asm/uaccess_64.h:112 [inline] raw_copy_from_user arch/x86/include/asm/uaccess_64.h:127 [inline] _copy_from_user+0xc2/0xf0 lib/usercopy.c:23 copy_from_user include/linux/uaccess.h:183 [inline] snd_rawmidi_kernel_write1+0x360/0x860 sound/core/rawmidi.c:1618 snd_rawmidi_write+0x278/0xc10 sound/core/rawmidi.c:1687 vfs_write+0x2a4/0xe40 fs/read_write.c:582 ksys_write+0x1f0/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f235b07cae9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f235bd9a0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f235b19bf80 RCX: 00007f235b07cae9 RDX: 00000000fffffd2c RSI: 0000000020000000 RDI: 0000000000000005 RBP: 00007f235b0c847a R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f235b19bf80 R15: 00007ffd9cdf0fe8 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:vmf_insert_pfn_prot+0x247/0x430 mm/memory.c:2214 Code: 0f 0b e8 0c 4f c0 ff 49 89 ef bf 20 00 00 00 41 83 e7 28 4c 89 fe e8 88 4a c0 ff 49 83 ff 20 0f 85 aa fe ff ff e8 e9 4e c0 ff <0f> 0b 48 bd ff ff ff ff ff ff 0f 00 e8 d8 4e c0 ff 4c 89 f6 48 89 RSP: 0018:ffffc9000415f750 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8880275a0d00 RCX: 0000000000000000 RDX: ffff888018379dc0 RSI: ffffffff81c5b9b7 RDI: 0000000000000007 RBP: 000000000c140477 R08: 0000000000000007 R09: 0000000000000020 R10: 0000000000000020 R11: 000000000000001f R12: 0000000020ffc000 R13: 1ffff9200082beeb R14: 000000000007e79e R15: 0000000000000020 FS: 00007f235bd9a6c0(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f93c20ffac1 CR3: 0000000022a32000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 ---------------- Code disassembly (best guess): 0: 75 f1 jne 0xfffffff3 2: c3 ret 3: 66 66 2e 0f 1f 84 00 data16 cs nopw 0x0(%rax,%rax,1) a: 00 00 00 00 e: 66 90 xchg %ax,%ax 10: 48 8b 06 mov (%rsi),%rax 13: 48 89 07 mov %rax,(%rdi) 16: 48 83 c6 08 add $0x8,%rsi 1a: 48 83 c7 08 add $0x8,%rdi 1e: 83 e9 08 sub $0x8,%ecx 21: 74 df je 0x2 23: 83 f9 08 cmp $0x8,%ecx 26: 73 e8 jae 0x10 28: eb c9 jmp 0xfffffff3 * 2a: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) <-- trapping instruction 2c: c3 ret 2d: 0f 1f 00 nopl (%rax) 30: 4c 8b 06 mov (%rsi),%r8 33: 4c 8b 4e 08 mov 0x8(%rsi),%r9 37: 4c 8b 56 10 mov 0x10(%rsi),%r10 3b: 4c 8b 5e 18 mov 0x18(%rsi),%r11 3f: 4c rex.WR --- This report is generated by a bot. It may contain errors. See https://goo.gl/tpsmEJ for more information about syzbot. syzbot engineers can be reached at syzkaller(a)googlegroups.com. syzbot will keep track of this issue. See: https://goo.gl/tpsmEJ#status for how to communicate with syzbot. If the bug is already fixed, let syzbot know by replying with: #syz fix: exact-commit-title If you want syzbot to run the reproducer, reply with: #syz test: git://repo/address.git branch-or-commit-hash If you attach or paste a git patch, syzbot will apply it before testing. If you want to overwrite bug's subsystems, reply with: #syz set subsystems: new-subsystem (See the list of subsystem names on the web dashboard) If the bug is a duplicate of another bug, reply with: #syz dup: exact-subject-of-another-report If you want to undo deduplication, reply with: #syz undup

1 year, 1 month

[PATCH] spi: tegra: Fix missing IRQ check in tegra_slink_probe()

by Zhang Shurong

This func misses checking for platform_get_irq()'s call and may passes the negative error codes to request_irq(), which takes unsigned IRQ #, causing it to fail with -EINVAL, overriding an original error code. Fix this by stop calling request_irq() with invalid IRQ #s. Fixes: dc4dc3605639 ("spi: tegra: add spi driver for SLINK controller") Signed-off-by: Zhang Shurong <zhang_shurong(a)foxmail.com> --- drivers/spi/spi-tegra20-slink.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c index 4d6db6182c5e..f5cd365c913a 100644 --- a/drivers/spi/spi-tegra20-slink.c +++ b/drivers/spi/spi-tegra20-slink.c @@ -1086,6 +1086,8 @@ static int tegra_slink_probe(struct platform_device *pdev) reset_control_deassert(tspi->rst); spi_irq = platform_get_irq(pdev, 0); + if (spi_irq < 0) + return spi_irq; tspi->irq = spi_irq; ret = request_threaded_irq(tspi->irq, tegra_slink_isr, tegra_slink_isr_thread, IRQF_ONESHOT, -- 2.30.2

1 year, 3 months

[PATCH v1 v1 0/7] DRM driver for verisilicon

by Keith Zhao

This patch is a drm driver for Starfive Soc JH7110, I am sending Drm driver part and HDMI driver part. We used GEM framework for buffer management , and for buffer allocation,we use DMA APIs. the Starfive HDMI servers as interface between a LCD Controller and a HDMI bus. A HDMI TX consists of one HDMI transmitter controller and one HDMI transmitter PHY. (Sound support is not include in this patch) This patchset should be applied after the patchset: https://patchwork.kernel.org/project/linux-clk/cover/20230713113902.56519-1… V1: Changes since v1: - Further standardize the yaml file. - Dts naming convention improved. - Fix the problem of compiling and loading ko files. - Use drm new api to automatically manage resources. - Drop struct vs_crtc_funcs&vs_plane_funcs，subdivide the plane's help interface - Reduce the modifiers unused. - Optimize the hdmi driver code Keith Zhao (7): MAINTAINERS: Update starfive maintainers dt-bindings: display: Add yamls for JH7110 display system riscv: dts: starfive: jh7110: add dc controller and hdmi node drm/fourcc: Add drm/vs tiled modifiers drm/vs: Register DRM device drm/vs: Add KMS crtc&plane drm/vs: Add hdmi .../starfive/starfive,display-subsystem.yaml | 41 + .../starfive/starfive,jh7110-dc8200.yaml | 107 + .../starfive/starfive,jh7110-inno-hdmi.yaml | 92 + MAINTAINERS | 7 + .../jh7110-starfive-visionfive-2.dtsi | 87 + arch/riscv/boot/dts/starfive/jh7110.dtsi | 43 + drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/verisilicon/Kconfig | 25 + drivers/gpu/drm/verisilicon/Makefile | 13 + drivers/gpu/drm/verisilicon/starfive_hdmi.c | 940 ++++++++ drivers/gpu/drm/verisilicon/starfive_hdmi.h | 295 +++ drivers/gpu/drm/verisilicon/vs_crtc.c | 365 +++ drivers/gpu/drm/verisilicon/vs_crtc.h | 54 + drivers/gpu/drm/verisilicon/vs_dc.c | 1036 +++++++++ drivers/gpu/drm/verisilicon/vs_dc.h | 87 + drivers/gpu/drm/verisilicon/vs_dc_hw.c | 2008 +++++++++++++++++ drivers/gpu/drm/verisilicon/vs_dc_hw.h | 496 ++++ drivers/gpu/drm/verisilicon/vs_drv.c | 274 +++ drivers/gpu/drm/verisilicon/vs_drv.h | 54 + drivers/gpu/drm/verisilicon/vs_gem.c | 298 +++ drivers/gpu/drm/verisilicon/vs_gem.h | 50 + drivers/gpu/drm/verisilicon/vs_modeset.c | 92 + drivers/gpu/drm/verisilicon/vs_modeset.h | 13 + drivers/gpu/drm/verisilicon/vs_plane.c | 502 +++++ drivers/gpu/drm/verisilicon/vs_plane.h | 65 + drivers/gpu/drm/verisilicon/vs_type.h | 70 + include/uapi/drm/drm_fourcc.h | 27 + include/uapi/drm/vs_drm.h | 50 + 29 files changed, 7194 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml create mode 100644 drivers/gpu/drm/verisilicon/Kconfig create mode 100644 drivers/gpu/drm/verisilicon/Makefile create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.c create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.h create mode 100644 drivers/gpu/drm/verisilicon/vs_crtc.c create mode 100644 drivers/gpu/drm/verisilicon/vs_crtc.h create mode 100644 drivers/gpu/drm/verisilicon/vs_dc.c create mode 100644 drivers/gpu/drm/verisilicon/vs_dc.h create mode 100644 drivers/gpu/drm/verisilicon/vs_dc_hw.c create mode 100644 drivers/gpu/drm/verisilicon/vs_dc_hw.h create mode 100644 drivers/gpu/drm/verisilicon/vs_drv.c create mode 100644 drivers/gpu/drm/verisilicon/vs_drv.h create mode 100644 drivers/gpu/drm/verisilicon/vs_gem.c create mode 100644 drivers/gpu/drm/verisilicon/vs_gem.h create mode 100644 drivers/gpu/drm/verisilicon/vs_modeset.c create mode 100644 drivers/gpu/drm/verisilicon/vs_modeset.h create mode 100644 drivers/gpu/drm/verisilicon/vs_plane.c create mode 100644 drivers/gpu/drm/verisilicon/vs_plane.h create mode 100644 drivers/gpu/drm/verisilicon/vs_type.h create mode 100644 include/uapi/drm/vs_drm.h -- 2.34.1

1 year, 3 months

[PATCH v2 0/2] doc: uapi: Document dma-buf interop design & semantics

by Daniel Stone

Hi all, This is v2 to the linked patch series; thanks to everyone for reviewing the initial version. I've moved this out of a pure DRM scope and into the general userspace-API design section. Hopefully it helps others and answers a bunch of questions. I think it'd be great to have input/links/reflections from other subsystems as well here. Cheers, Daniel

1 year, 3 months

[PATCH v2] dma-buf/sw_sync: Avoid recursive lock during fence signal

by Rob Clark

From: Rob Clark <robdclark(a)chromium.org> If a signal callback releases the sw_sync fence, that will trigger a deadlock as the timeline_fence_release recurses onto the fence->lock (used both for signaling and the the timeline tree). To avoid that, temporarily hold an extra reference to the signalled fences until after we drop the lock. (This is an alternative implementation of https://patchwork.kernel.org/patch/11664717/ which avoids some potential UAF issues with the original patch.) v2: Remove now obsolete comment, use list_move_tail() and list_del_init() Reported-by: Bas Nieuwenhuizen <bas(a)basnieuwenhuizen.nl> Fixes: d3c6dd1fb30d ("dma-buf/sw_sync: Synchronize signal vs syncpt free") Signed-off-by: Rob Clark <robdclark(a)chromium.org> --- drivers/dma-buf/sw_sync.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/dma-buf/sw_sync.c b/drivers/dma-buf/sw_sync.c index 63f0aeb66db6..f0a35277fd84 100644 --- a/drivers/dma-buf/sw_sync.c +++ b/drivers/dma-buf/sw_sync.c @@ -191,6 +191,7 @@ static const struct dma_fence_ops timeline_fence_ops = { */ static void sync_timeline_signal(struct sync_timeline *obj, unsigned int inc) { + LIST_HEAD(signalled); struct sync_pt *pt, *next; trace_sync_timeline(obj); @@ -203,21 +204,20 @@ static void sync_timeline_signal(struct sync_timeline *obj, unsigned int inc) if (!timeline_fence_signaled(&pt->base)) break; - list_del_init(&pt->link); + dma_fence_get(&pt->base); + + list_move_tail(&pt->link, &signalled); rb_erase(&pt->node, &obj->pt_tree); - /* - * A signal callback may release the last reference to this - * fence, causing it to be freed. That operation has to be - * last to avoid a use after free inside this loop, and must - * be after we remove the fence from the timeline in order to - * prevent deadlocking on timeline->lock inside - * timeline_fence_release(). - */ dma_fence_signal_locked(&pt->base); } spin_unlock_irq(&obj->lock); + + list_for_each_entry_safe(pt, next, &signalled, link) { + list_del_init(&pt->link); + dma_fence_put(&pt->base); + } } /** -- 2.41.0

1 year, 3 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig August 2023