linaro-kernel

linaro-kernel@lists.linaro.org

10094 discussions

queue boot: 17 pass, 1 fail (v3.10.32-39-g07e42bb)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.10.32-39-g07e42bb Failed boot tests (console logs at the end) =========================================== imx6dl-wandboard,wand-solo: FAIL: imx_v6_v7_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 14.6 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 53.4 sec omap3-beagle-xm PASS: 0 min 58.1 sec legacy,3530beagle PASS: 0 min 40.1 sec omap4-panda PASS: 1 min 14.8 sec omap3-tobi PASS: 0 min 36.5 sec am335x-bone PASS: 0 min 26.3 sec omap4-panda-es PASS: 1 min 2.1 sec legacy,3730storm PASS: 0 min 20.6 sec legacy,3530overo PASS: 0 min 20.9 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 21.7 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.1 sec imx6dl-wandboard,wand-solo FAIL: 0 min 31.4 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.1 sec armada-370-mirabox PASS: 0 min 19.6 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.3 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 16.4 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.0 sec Console logs for failures ========================= imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Connected to wand-solo console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-solo console)> hardreset (user:khilman) Reboot wand-solo Reboot: wand-solo ; phidget 2 2 : off, sleep, on U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) CPU: Freescale i.MX6SOLO rev1.1 at 792 MHz Reset cause: POR Board: Wandboard DRAM: 512 MiB WARNING: Caches not enabled MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default env 0 => ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: FAIL

11 years, 2 months

[PATCH v3 0/5] [RFC] Support for creating generic host_bridge from device tree

by Liviu Dudau

This is v3 of my attempt to add support for a generic pci_host_bridge controller created from a description passed in the device tree. Changes from v2: - Use range->cpu_addr when calling pci_address_to_pio() - Introduce pci_register_io_range() helper function in order to register io ranges ahead of their conversion to PIO values. This is needed as no information is being stored yet regarding the range mapping, making pci_address_to_pio() fail. Default weak implementation does nothing, to cover the default weak implementation of pci_address_to_pio() that expects direct mapping of physical addresses into PIO values (x86 view). Changes from v1: - Add patch to fix conversion of IO ranges into IO resources. - Added a domain_nr member to pci_host_bridge structure, and a new function to create a root bus in a given domain number. In order to facilitate that I propose changing the order of initialisation between pci_host_bridge and it's related bus in pci_create_root_bus() as sort of a rever of 7b5436635800. This is done in patch 1/4 and 2/4. - Added a simple allocator of domain numbers in drivers/pci/host-bridge.c. The code will first try to get a domain id from of_alias_get_id(..., "pci-domain") and if that fails assign the next unallocated domain id. - Changed the name of the function that creates the generic host bridge from pci_host_bridge_of_init to of_create_pci_host_bridge and exported as GPL symbol. v1 thread here: https://lkml.org/lkml/2014/2/3/380 The following is an edit of the original blurb: Following the discussion started here [1], I now have a proposal for tackling generic support for host bridges described via device tree. It is an initial stab at it, to try to get feedback and suggestions, but it is functional enough that I have PCI Express for arm64 working on an FPGA using the patch that I am also publishing that adds support for PCI for that platform. Looking at the existing architectures that fit the requirements (use of device tree and PCI) yields the powerpc and microblaze as generic enough to make them candidates for conversion. I have a tentative patch for microblaze that I can only compile test it, unfortunately using qemu-microblaze leads to an early crash in the kernel. As Bjorn has mentioned in the previous discussion, the idea is to add to struct pci_host_bridge enough data to be able to reduce the size or remove the architecture specific pci_controller structure. arm64 support actually manages to get rid of all the architecture static data and has no pci_controller structure defined. For host bridge drivers that means a change of API unless architectures decide to provide a compatibility layer (comments here please). In order to initialise a host bridge with the new API, the following example code is sufficient for a _probe() function: static int myhostbridge_probe(struct platform_device *pdev) { int err; struct device_node *dev; struct pci_host_bridge *bridge; struct myhostbridge_port *pp; resource_size_t lastbus; dev = pdev->dev.of_node; if (!of_device_is_available(dev)) { pr_warn("%s: disabled\n", dev->full_name); return -ENODEV; } pp = kzalloc(sizeof(struct myhostbridge_port), GFP_KERNEL); if (!pp) return -ENOMEM; bridge = of_create_pci_host_bridge(&pdev->dev, &myhostbridge_ops, pp); if (!bridge) { err = -EINVAL; goto bridge_init_fail; } err = myhostbridge_setup(bridge->bus); if (err) goto bridge_init_fail; /* We always enable PCI domains and we keep domain 0 backward * compatible in /proc for video cards */ pci_add_flags(PCI_ENABLE_PROC_DOMAINS | PCI_COMPAT_DOMAIN_0); pci_add_flags(PCI_REASSIGN_ALL_BUS | PCI_REASSIGN_ALL_RSRC); lastbus = pci_scan_child_bus(bridge->bus); pci_bus_update_busn_res_end(bridge->bus, lastbus); pci_assign_unassigned_bus_resources(bridge->bus); pci_bus_add_devices(bridge->bus); return 0; bridge_init_fail: kfree(pp); return err; } [1] http://thread.gmane.org/gmane.linux.kernel.pci/25946 Best regards, Liviu Liviu Dudau (5): pci: Introduce pci_register_io_range() helper function. pci: OF: Fix the conversion of IO ranges into IO resources. pci: Create pci_host_bridge before its associated bus in pci_create_root_bus. pci: Introduce a domain number for pci_host_bridge. pci: Add support for creating a generic host_bridge from device tree drivers/of/address.c | 39 +++++++++++++ drivers/pci/host-bridge.c | 134 +++++++++++++++++++++++++++++++++++++++++++++ drivers/pci/probe.c | 66 ++++++++++++++-------- include/linux/of_address.h | 14 +---- include/linux/pci.h | 17 ++++++ 5 files changed, 236 insertions(+), 34 deletions(-) -- 1.9.0

11 years, 2 months

queue boot: 41 pass, 0 fail (v3.13.5-78-g29d766a)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.13.5-78-g29d766a Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.1 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 52.3 sec am335x-boneblack PASS: 0 min 25.4 sec omap3-beagle-xm PASS: 0 min 59.4 sec legacy,3530beagle PASS: 0 min 30.9 sec omap4-panda PASS: 1 min 6.4 sec omap3-tobi PASS: 0 min 22.2 sec am335x-bone PASS: 0 min 27.1 sec omap4-panda-es PASS: 1 min 2.4 sec legacy,3730storm PASS: 0 min 20.2 sec legacy,3530overo PASS: 0 min 21.0 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 13.5 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.2 sec imx6q-wandboard PASS: 0 min 16.8 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 11.4 sec sun4i-a10-cubieboard PASS: 0 min 12.2 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.1 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 29.4 sec tegra30-beaver PASS: 0 min 14.3 sec am335x-boneblack PASS: 0 min 22.2 sec omap3-beagle-xm PASS: 1 min 4.2 sec sun7i-a20-cubieboard2 PASS: 0 min 13.4 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 5.5 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.8 sec sun4i-a10-cubieboard PASS: 0 min 17.8 sec bcm28155-ap PASS: 1 min 4.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.0 sec omap3-tobi PASS: 0 min 20.6 sec am335x-bone PASS: 0 min 23.9 sec imx6q-wandboard PASS: 0 min 16.2 sec omap4-panda-es PASS: 1 min 3.6 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.3 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 27.9 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 16.4 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 19.9 sec

11 years, 2 months

mainline boot: 45 pass, 2 fail (v3.14-rc4-120-g8427def)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc4-120-g8427def Failed boot tests (console logs at the end) =========================================== legacy,3730xm: FAIL: omap2plus_defconfig omap3-beagle-xm: FAIL: omap2plus_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.2 sec omap2plus_defconfig ------------------- legacy,3730xm FAIL: 0 min 43.0 sec am335x-boneblack PASS: 0 min 25.6 sec omap3-beagle-xm FAIL: 0 min 31.4 sec legacy,3530beagle PASS: 0 min 35.9 sec omap4-panda PASS: 1 min 13.0 sec omap3-overo-tobi PASS: 0 min 22.9 sec am335x-bone PASS: 0 min 27.3 sec omap3-overo-storm-tobi PASS: 0 min 25.6 sec omap5-uevm PASS: 1 min 2.6 sec omap4-panda-es PASS: 1 min 13.0 sec legacy,3730storm PASS: 0 min 23.8 sec legacy,3530overo PASS: 0 min 21.0 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 43.6 sec sun7i-a20-cubieboard2 PASS: 0 min 14.0 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec imx6q-wandboard PASS: 0 min 17.0 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 9.4 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 53.6 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.7 sec sun4i-a10-cubieboard PASS: 0 min 16.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.1 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.5 sec tegra30-beaver PASS: 0 min 16.9 sec am335x-boneblack PASS: 0 min 23.2 sec omap3-beagle-xm PASS: 0 min 51.3 sec sun7i-a20-cubieboard2 PASS: 0 min 14.2 sec armada-370-mirabox PASS: 0 min 22.3 sec omap4-panda PASS: 1 min 2.5 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.9 sec sun4i-a10-cubieboard PASS: 0 min 18.5 sec bcm28155-ap PASS: 0 min 59.1 sec omap3-overo-tobi PASS: 0 min 21.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.6 sec am335x-bone PASS: 0 min 25.9 sec omap3-overo-storm-tobi PASS: 0 min 24.0 sec omap5-uevm PASS: 1 min 49.4 sec imx6q-wandboard PASS: 0 min 17.3 sec omap4-panda-es PASS: 0 min 49.7 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.1 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.9 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 16.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.2 sec armada-370-mirabox PASS: 0 min 20.3 sec Console logs for failures ========================= omap2plus_defconfig ------------------- legacy,3730xm: FAIL: last 80 lines of boot log: ----------------------------------------------- U-Boot 2013.04 (Jan 17 2014 - 10:48:29) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 GNU ld (GNU Binutils for Ubuntu) 2.23.2 OMAP3 beagleboard.org #setenv usbethaddr 2a:45:34:6d:b4:5d setenv usbethaddr 2a:45:34:6d:b4:5d OMAP3 beagleboard.org # setenv preboot "dcache off; usb start" # For USB net setenv preboot "dcache off; usb start" # For USB net OMAP3 beagleboard.org # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 OMAP3 beagleboard.org #setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' OMAP3 beagleboard.org # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi OMAP3 beagleboard.org # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org #setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.190 OMAP3 beagleboard.org #setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 OMAP3 beagleboard.org # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org # tftp 0x80200000 192.168.1.2:tmp/3730xm-y26vuV/zImage tftp 0x80200000 192.168.1.2:tmp/3730xm-y26vuV/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-y26vuV/zImage'. Load address: 0x80200000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################ 504.9 KiB/s done Bytes transferred = 4277400 (414498 hex) OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *T ############################################ 113.3 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org # bootz 0x80200000 0x81000000 bootz 0x80200000 0x81000000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 43.02 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 80 lines of boot log: ------------------------------------------------- Connected to 3730xm console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(3730xm console)> hardreset (user:khilman) Reboot 3730xm Reboot: 3730xm ; phidget 0 2 : off, sleep, on 0 OMAP3 beagleboard.org # ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: FAIL

11 years, 2 months

mainline boot: 47 pass, 0 fail (v3.14-rc4-119-gebb7c19)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc4-119-gebb7c19 Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.1 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 48.8 sec am335x-boneblack PASS: 0 min 25.7 sec omap3-beagle-xm PASS: 0 min 57.8 sec legacy,3530beagle PASS: 0 min 36.1 sec omap4-panda PASS: 1 min 11.1 sec omap3-overo-tobi PASS: 0 min 26.0 sec am335x-bone PASS: 0 min 27.3 sec omap3-overo-storm-tobi PASS: 0 min 25.2 sec omap5-uevm PASS: 0 min 53.6 sec omap4-panda-es PASS: 1 min 6.8 sec legacy,3730storm PASS: 0 min 23.4 sec legacy,3530overo PASS: 0 min 20.9 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 47.4 sec sun7i-a20-cubieboard2 PASS: 0 min 14.1 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec imx6q-wandboard PASS: 0 min 16.9 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 0 min 58.8 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.7 sec sun4i-a10-cubieboard PASS: 0 min 16.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.0 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.3 sec tegra30-beaver PASS: 0 min 19.4 sec am335x-boneblack PASS: 0 min 23.2 sec omap3-beagle-xm PASS: 0 min 48.5 sec sun7i-a20-cubieboard2 PASS: 0 min 14.2 sec armada-370-mirabox PASS: 0 min 22.2 sec omap4-panda PASS: 0 min 58.3 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.9 sec sun4i-a10-cubieboard PASS: 0 min 18.3 sec bcm28155-ap PASS: 1 min 10.1 sec omap3-overo-tobi PASS: 0 min 24.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.7 sec am335x-bone PASS: 0 min 26.0 sec omap3-overo-storm-tobi PASS: 0 min 23.7 sec omap5-uevm PASS: 1 min 45.1 sec imx6q-wandboard PASS: 0 min 17.3 sec omap4-panda-es PASS: 0 min 52.0 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.3 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 16.4 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.2 sec armada-370-mirabox PASS: 0 min 20.2 sec

11 years, 2 months

arm-soc boot: 41 pass, 2 fail (v3.14-rc3-506-g403172d)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc3-506-g403172d Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: mvebu_v7_defconfig ste-snowball: FAIL: multi_v7_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.2 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 48.1 sec am335x-boneblack PASS: 0 min 25.6 sec omap3-beagle-xm PASS: 0 min 56.8 sec legacy,3530beagle PASS: 0 min 35.9 sec omap4-panda PASS: 1 min 10.8 sec omap3-overo-tobi PASS: 0 min 22.9 sec am335x-bone PASS: 0 min 27.4 sec omap3-overo-storm-tobi PASS: 0 min 25.2 sec omap4-panda-es PASS: 1 min 7.3 sec legacy,3730storm PASS: 0 min 23.6 sec legacy,3530overo PASS: 0 min 21.1 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 14.2 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec imx6q-wandboard PASS: 0 min 16.9 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 11.7 sec sun4i-a10-cubieboard PASS: 0 min 17.0 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 53.6 sec mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 FAIL: 0 min 20.4 sec armada-370-mirabox PASS: 0 min 20.3 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.4 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 33.4 sec tegra30-beaver PASS: 0 min 16.9 sec am335x-boneblack PASS: 0 min 23.6 sec omap3-beagle-xm PASS: 0 min 50.1 sec sun7i-a20-cubieboard2 PASS: 0 min 14.2 sec armada-370-mirabox PASS: 0 min 22.4 sec omap4-panda PASS: 0 min 54.2 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.1 sec sun4i-a10-cubieboard PASS: 0 min 21.6 sec bcm28155-ap PASS: 1 min 9.5 sec omap3-overo-tobi PASS: 0 min 21.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.8 sec am335x-bone PASS: 0 min 26.3 sec omap3-overo-storm-tobi PASS: 0 min 21.4 sec imx6q-wandboard PASS: 0 min 17.1 sec omap4-panda-es PASS: 0 min 55.8 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.0 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 29.5 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 16.5 sec Console logs for failures ========================= mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy -38 Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc3-00506-g403172d #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c92b4>] lr : [<c02c6960>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee025c90 r9 : ee90b000 r8 : ffffffda r7 : ee90b010 r6 : 00000000 r5 : eeb080d0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c0206700 ee910c60 c00ffbcc c0516d30 0000001f de20: ee910c60 00000002 c03ea324 00000000 74726f70 ee910030 00000001 ee93cc18 de40: 0000008c ee90b010 c054f518 00000000 c054f518 c0516d30 0000008c ee83c030 de60: 00000000 c01cb250 c01cb238 c0588308 ee90b010 c01c99d8 00000007 ee90b010 de80: c054f518 ee90b044 00000000 c01c9c58 00000000 c054f518 c01c9bc0 c01c80d0 dea0: ee85a7dc ee85e134 c054f518 ee025d00 c054e478 c01c9280 c0499614 c05652c0 dec0: c054f518 c054f518 00000006 c05652c0 c05652c0 c01ca29c 00000000 c052c980 dee0: 00000006 c0516d60 c052c980 c000893c 00000070 00000042 ef7fce15 c03e3b20 df00: 00000000 00000000 c04810f0 00000000 00000002 c04deaa0 00000064 ee83df30 df20: ef7fce1b c03e3b20 0000008c c0035f74 c04dea80 00000006 ef7fce26 00000006 df40: c053deb0 c052c980 00000006 c05652c0 c05652c0 c050250c 0000008c c0525d14 df60: c0525d08 c0502c40 00000006 00000006 c050250c d456fc5d 0fbbed6f 4faffddf df80: fbff7bce 00000000 c03c6ffc 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03c7004 00000000 c000e338 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fffb dd7dfd3f [<c02c92b4>] (__clk_put) from [<c0206700>] (mv_platform_probe+0x2ac/0x414) [<c0206700>] (mv_platform_probe) from [<c01cb250>] (platform_drv_probe+0x18/0x48) [<c01cb250>] (platform_drv_probe) from [<c01c99d8>] (really_probe+0x80/0x214) [<c01c99d8>] (really_probe) from [<c01c9c58>] (__driver_attach+0x98/0x9c) [<c01c9c58>] (__driver_attach) from [<c01c80d0>] (bus_for_each_dev+0x60/0x94) [<c01c80d0>] (bus_for_each_dev) from [<c01c9280>] (bus_add_driver+0x148/0x1f0) [<c01c9280>] (bus_add_driver) from [<c01ca29c>] (driver_register+0x78/0xf8) [<c01ca29c>] (driver_register) from [<c0516d60>] (mv_init+0x30/0x50) [<c0516d60>] (mv_init) from [<c000893c>] (do_one_initcall+0xf8/0x144) [<c000893c>] (do_one_initcall) from [<c0502c40>] (kernel_init_freeable+0x138/0x1d8) [<c0502c40>] (kernel_init_freeable) from [<c03c7004>] (kernel_init+0x8/0xf0) [<c03c7004>] (kernel_init) from [<c000e338>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace b705e328e84c2f2a ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc3-00506-g403172d #1 [<c0014940>] (unwind_backtrace) from [<c0011194>] (show_stack+0x10/0x14) [<c0011194>] (show_stack) from [<c03cb7fc>] (dump_stack+0x80/0x90) [<c03cb7fc>] (dump_stack) from [<c0013d04>] (handle_IPI+0x148/0x170) [<c0013d04>] (handle_IPI) from [<c00085cc>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085cc>] (armada_370_xp_handle_irq) from [<c0011cc0>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe55b8 00000000 00000944 00000000 ee876000 c05384ac c03d2d00 ee876000 7fc0: c0565176 00000001 c0565176 ee876000 00000000 ee877fe8 c000eeac c00558b8 7fe0: 60000113 ffffffff [<c0011cc0>] (__irq_svc) from [<c00558b8>] (cpu_startup_entry+0xf4/0x134) [<c00558b8>] (cpu_startup_entry) from [<000086c4>] (0x86c4) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.43 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- (user:khilman) Reboot snowball Reboot: snowball ; ip9258 2 2 : ('off', 6, 'on') , sleep 6, MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version U8500 $ versionsetenv ethaddr 6e:e6:84:36:8e:9e U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9esetenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi U8500 $ if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no U8500 $ setenv autoload no; setenv autoboot nodhcp U8500 $ dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-teqK85/tmps0vlvZ-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-teqK85/tmps0vlvZ-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-teqK85/tmps0vlvZ-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## done Bytes transferred = 4541873 (454db1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4541809 Bytes = 4.3 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.38 seconds. # PYBOOT: Result: FAIL

11 years, 2 months

mainline boot: 46 pass, 1 fail (v3.14-rc4-78-gd8efcf3)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc4-78-gd8efcf3 Failed boot tests (console logs at the end) =========================================== omap5-uevm: FAIL: multi_v7_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.2 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 49.8 sec am335x-boneblack PASS: 0 min 25.4 sec omap3-beagle-xm PASS: 0 min 55.9 sec legacy,3530beagle PASS: 0 min 36.6 sec omap4-panda PASS: 1 min 9.8 sec omap3-overo-tobi PASS: 0 min 22.7 sec am335x-bone PASS: 0 min 32.3 sec omap3-overo-storm-tobi PASS: 0 min 22.2 sec omap5-uevm PASS: 1 min 4.6 sec omap4-panda-es PASS: 1 min 10.1 sec legacy,3730storm PASS: 0 min 20.2 sec legacy,3530overo PASS: 0 min 21.2 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 40.6 sec sun7i-a20-cubieboard2 PASS: 0 min 14.2 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.4 sec imx6q-wandboard PASS: 0 min 16.9 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 9.4 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 54.2 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.7 sec sun4i-a10-cubieboard PASS: 0 min 17.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.5 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.4 sec tegra30-beaver PASS: 0 min 23.0 sec am335x-boneblack PASS: 0 min 23.2 sec omap3-beagle-xm PASS: 0 min 49.4 sec sun7i-a20-cubieboard2 PASS: 0 min 14.2 sec armada-370-mirabox PASS: 0 min 22.2 sec omap4-panda PASS: 0 min 53.2 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.9 sec sun4i-a10-cubieboard PASS: 0 min 13.8 sec bcm28155-ap PASS: 1 min 3.9 sec omap3-overo-tobi PASS: 0 min 21.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.7 sec am335x-bone PASS: 0 min 26.0 sec omap3-overo-storm-tobi PASS: 0 min 24.3 sec omap5-uevm FAIL: 0 min 31.4 sec imx6q-wandboard PASS: 0 min 17.3 sec omap4-panda-es PASS: 0 min 53.7 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.0 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.0 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 16.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.2 sec armada-370-mirabox PASS: 0 min 20.3 sec Console logs for failures ========================= multi_v7_defconfig ------------------ omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- Connected to omap5uevm console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(omap5uevm console)> hardreset (user:khilman) Reboot omap5uevm Reboot: omap5uevm ; phidget 1 2 : off, sleep, on 0 U-Boot# found: 002/002 2 ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.37 seconds. # PYBOOT: Result: FAIL

11 years, 2 months

arm-soc boot: 39 pass, 4 fail (v3.14-rc3-505-g74b2668)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc3-505-g74b2668 Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_v7_defconfig omap3-beagle-xm: FAIL: multi_v7_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.6 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 52.3 sec am335x-boneblack PASS: 0 min 26.0 sec omap3-beagle-xm PASS: 0 min 55.9 sec legacy,3530beagle PASS: 0 min 43.1 sec omap4-panda PASS: 1 min 7.2 sec omap3-overo-tobi PASS: 0 min 23.0 sec am335x-bone PASS: 0 min 27.6 sec omap3-overo-storm-tobi PASS: 0 min 25.4 sec omap4-panda-es PASS: 1 min 6.8 sec legacy,3730storm PASS: 0 min 23.6 sec legacy,3530overo PASS: 0 min 21.5 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.8 sec imx6q-wandboard PASS: 0 min 17.3 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 18.9 sec sun4i-a10-cubieboard FAIL: 0 min 18.7 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 59.1 sec mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 FAIL: 0 min 20.3 sec armada-370-mirabox PASS: 0 min 20.4 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.6 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.6 sec tegra30-beaver PASS: 0 min 20.0 sec am335x-boneblack PASS: 0 min 23.6 sec omap3-beagle-xm FAIL: 0 min 31.4 sec sun7i-a20-cubieboard2 PASS: 0 min 14.5 sec armada-370-mirabox PASS: 0 min 22.4 sec omap4-panda PASS: 0 min 51.9 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.0 sec sun4i-a10-cubieboard PASS: 0 min 14.4 sec bcm28155-ap PASS: 1 min 10.4 sec omap3-overo-tobi PASS: 0 min 21.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec am335x-bone PASS: 0 min 26.6 sec omap3-overo-storm-tobi PASS: 0 min 24.4 sec imx6q-wandboard PASS: 0 min 17.6 sec omap4-panda-es PASS: 0 min 53.7 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.4 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.0 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 16.9 sec Console logs for failures ========================= sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun7i# setenv ethaddr 22:71:81:DA:53:EA setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-8lLxsJ/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-8lLxsJ/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-8lLxsJ/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################## 2.7 MiB/s done Bytes transferred = 1772976 (1b0db0 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-8lLxsJ/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-8lLxsJ/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-8lLxsJ/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 1.9 MiB/s done Bytes transferred = 12228 (2fc4 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i#bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b0db0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefc3 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.91 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun4i# setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-xSjVmp/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-xSjVmp/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-xSjVmp/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################## 2.7 MiB/s done Bytes transferred = 1772976 (1b0db0 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-xSjVmp/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-xSjVmp/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-xSjVmp/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 2.1 MiB/s done Bytes transferred = 10877 (2a7d hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b0db0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa7c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.74 seconds. # PYBOOT: Result: FAIL mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy -38 Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc3-00505-g74b2668 #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c92b4>] lr : [<c02c6960>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee397c90 r9 : ee90b000 r8 : ffffffda r7 : ee90b010 r6 : 00000000 r5 : eeb080d0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c0206700 ee910c60 c00ffbcc c0516d30 0000001f de20: ee910c60 00000002 c03ea324 00000000 74726f70 ee910030 00000001 ee39ac18 de40: 0000008c ee90b010 c054f518 00000000 c054f518 c0516d30 0000008c ee83c030 de60: 00000000 c01cb250 c01cb238 c0588308 ee90b010 c01c99d8 00000007 ee90b010 de80: c054f518 ee90b044 00000000 c01c9c58 00000000 c054f518 c01c9bc0 c01c80d0 dea0: ee85a7dc ee85e134 c054f518 ee397d00 c054e478 c01c9280 c0499614 c05652c0 dec0: c054f518 c054f518 00000006 c05652c0 c05652c0 c01ca29c 00000000 c052c980 dee0: 00000006 c0516d60 c052c980 c000893c 0000008c 00000000 c04810f0 00000000 df00: 00000000 c04dea90 00000064 ee83df20 c0035d80 c0035d8c 00000113 ffffffff df20: ef7fce1b c03e3b20 0000008c c0035f74 c04dea80 00000006 ef7fce26 00000006 df40: c053deb0 c052c980 00000006 c05652c0 c05652c0 c050250c 0000008c c0525d14 df60: c0525d08 c0502c40 00000006 00000006 c050250c d456fc5d 0fbbed6f 57affddf df80: fbff7bce 00000000 c03c6ffc 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03c7004 00000000 c000e338 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff7 dd7dfd3f [<c02c92b4>] (__clk_put) from [<c0206700>] (mv_platform_probe+0x2ac/0x414) [<c0206700>] (mv_platform_probe) from [<c01cb250>] (platform_drv_probe+0x18/0x48) [<c01cb250>] (platform_drv_probe) from [<c01c99d8>] (really_probe+0x80/0x214) [<c01c99d8>] (really_probe) from [<c01c9c58>] (__driver_attach+0x98/0x9c) [<c01c9c58>] (__driver_attach) from [<c01c80d0>] (bus_for_each_dev+0x60/0x94) [<c01c80d0>] (bus_for_each_dev) from [<c01c9280>] (bus_add_driver+0x148/0x1f0) [<c01c9280>] (bus_add_driver) from [<c01ca29c>] (driver_register+0x78/0xf8) [<c01ca29c>] (driver_register) from [<c0516d60>] (mv_init+0x30/0x50) [<c0516d60>] (mv_init) from [<c000893c>] (do_one_initcall+0xf8/0x144) [<c000893c>] (do_one_initcall) from [<c0502c40>] (kernel_init_freeable+0x138/0x1d8) [<c0502c40>] (kernel_init_freeable) from [<c03c7004>] (kernel_init+0x8/0xf0) [<c03c7004>] (kernel_init) from [<c000e338>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 263e553c74ddf1e5 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc3-00505-g74b2668 #1 [<c0014940>] (unwind_backtrace) from [<c0011194>] (show_stack+0x10/0x14) [<c0011194>] (show_stack) from [<c03cb7fc>] (dump_stack+0x80/0x90) [<c03cb7fc>] (dump_stack) from [<c0013d04>] (handle_IPI+0x148/0x170) [<c0013d04>] (handle_IPI) from [<c00085cc>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085cc>] (armada_370_xp_handle_irq) from [<c0011cc0>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe55b8 00000000 00000944 00000000 ee876000 c05384ac c03d2d00 ee876000 7fc0: c0565176 00000001 c0565176 ee876000 00000000 ee877fe8 c000eeac c00558b8 7fe0: 60000113 ffffffff [<c0011cc0>] (__irq_svc) from [<c00558b8>] (cpu_startup_entry+0xf4/0x134) [<c00558b8>] (cpu_startup_entry) from [<000086c4>] (0x86c4) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.29 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ omap3-beagle-xm: FAIL: last 80 lines of boot log: ------------------------------------------------- Connected to 3730xm console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(3730xm console)> hardreset (user:khilman) Reboot 3730xm Reboot: 3730xm ; phidget 0 2 : off, sleep, on 0 OMAP3 beagleboard.org # ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL

11 years, 2 months

arm-soc boot: 39 pass, 4 fail (v3.14-rc3-501-g158cfb5)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc3-501-g158cfb5 Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_v7_defconfig ste-snowball: FAIL: multi_v7_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.4 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 50.2 sec am335x-boneblack PASS: 0 min 25.7 sec omap3-beagle-xm PASS: 0 min 54.2 sec legacy,3530beagle PASS: 0 min 40.3 sec omap4-panda PASS: 1 min 14.3 sec omap3-overo-tobi PASS: 0 min 23.6 sec am335x-bone PASS: 0 min 27.5 sec omap3-overo-storm-tobi PASS: 0 min 25.1 sec omap4-panda-es PASS: 1 min 17.1 sec legacy,3730storm PASS: 0 min 23.8 sec legacy,3530overo PASS: 0 min 21.4 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 14.7 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec imx6q-wandboard PASS: 0 min 17.2 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 18.9 sec sun4i-a10-cubieboard FAIL: 0 min 18.5 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 59.0 sec mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 FAIL: 0 min 20.4 sec armada-370-mirabox PASS: 0 min 20.3 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.0 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 6.2 sec tegra30-beaver PASS: 0 min 17.2 sec am335x-boneblack PASS: 0 min 23.9 sec omap3-beagle-xm PASS: 0 min 53.1 sec sun7i-a20-cubieboard2 PASS: 0 min 14.5 sec armada-370-mirabox PASS: 0 min 22.3 sec omap4-panda PASS: 0 min 55.1 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.9 sec sun4i-a10-cubieboard PASS: 0 min 19.4 sec bcm28155-ap PASS: 1 min 4.1 sec omap3-overo-tobi PASS: 0 min 22.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.9 sec am335x-bone PASS: 0 min 26.5 sec omap3-overo-storm-tobi PASS: 0 min 24.6 sec imx6q-wandboard PASS: 0 min 17.5 sec omap4-panda-es PASS: 0 min 58.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.5 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 29.9 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.6 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 16.9 sec Console logs for failures ========================= sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun7i# setenv ethaddr 22:71:81:DA:53:EA setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-SDA13N/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-SDA13N/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-SDA13N/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################## 2.7 MiB/s done Bytes transferred = 1772968 (1b0da8 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-SDA13N/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-SDA13N/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-SDA13N/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 1.9 MiB/s done Bytes transferred = 12228 (2fc4 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b0da8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefc3 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.89 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun4i# setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-VrDbut/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-VrDbut/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-VrDbut/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################## 2.7 MiB/s done Bytes transferred = 1772968 (1b0da8 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-VrDbut/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-VrDbut/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-VrDbut/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 2.1 MiB/s done Bytes transferred = 10877 (2a7d hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i#bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b0da8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa7c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.47 seconds. # PYBOOT: Result: FAIL mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy -38 Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc3-00501-g158cfb5 #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c92b4>] lr : [<c02c6960>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee93dc90 r9 : ee90b000 r8 : ffffffda r7 : ee90b010 r6 : 00000000 r5 : eeb080d0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c0206700 ee910c60 c00ffbcc c0516d30 0000001f de20: ee910c60 00000002 c03ea324 00000000 74726f70 ee910030 00000001 ee394c18 de40: 0000008c ee90b010 c054f518 00000000 c054f518 c0516d30 0000008c ee83c030 de60: 00000000 c01cb250 c01cb238 c0588308 ee90b010 c01c99d8 00000007 ee90b010 de80: c054f518 ee90b044 00000000 c01c9c58 00000000 c054f518 c01c9bc0 c01c80d0 dea0: ee85a7dc ee85e134 c054f518 ee93dd00 c054e478 c01c9280 c0499614 c05652c0 dec0: c054f518 c054f518 00000006 c05652c0 c05652c0 c01ca29c 00000000 c052c980 dee0: 00000006 c0516d60 c052c980 c000893c 0000008c 00000000 c04810f0 00000000 df00: 00000000 c04dea90 00000064 ee83df20 c0035d80 c016a0ac 20000113 ffffffff df20: ef7fce1b c03e3b20 0000008c c0035f74 c04dea80 00000006 ef7fce26 00000006 df40: c053deb0 c052c980 00000006 c05652c0 c05652c0 c050250c 0000008c c0525d14 df60: c0525d08 c0502c40 00000006 00000006 c050250c d456fc5d 0fbbed6f 47affddf df80: fbff7bce 00000000 c03c6ffc 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03c7004 00000000 c000e338 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff3 dd7dfd7f [<c02c92b4>] (__clk_put) from [<c0206700>] (mv_platform_probe+0x2ac/0x414) [<c0206700>] (mv_platform_probe) from [<c01cb250>] (platform_drv_probe+0x18/0x48) [<c01cb250>] (platform_drv_probe) from [<c01c99d8>] (really_probe+0x80/0x214) [<c01c99d8>] (really_probe) from [<c01c9c58>] (__driver_attach+0x98/0x9c) [<c01c9c58>] (__driver_attach) from [<c01c80d0>] (bus_for_each_dev+0x60/0x94) [<c01c80d0>] (bus_for_each_dev) from [<c01c9280>] (bus_add_driver+0x148/0x1f0) [<c01c9280>] (bus_add_driver) from [<c01ca29c>] (driver_register+0x78/0xf8) [<c01ca29c>] (driver_register) from [<c0516d60>] (mv_init+0x30/0x50) [<c0516d60>] (mv_init) from [<c000893c>] (do_one_initcall+0xf8/0x144) [<c000893c>] (do_one_initcall) from [<c0502c40>] (kernel_init_freeable+0x138/0x1d8) [<c0502c40>] (kernel_init_freeable) from [<c03c7004>] (kernel_init+0x8/0xf0) [<c03c7004>] (kernel_init) from [<c000e338>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 58e00007acea8a88 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc3-00501-g158cfb5 #1 [<c0014940>] (unwind_backtrace) from [<c0011194>] (show_stack+0x10/0x14) [<c0011194>] (show_stack) from [<c03cb7fc>] (dump_stack+0x80/0x90) [<c03cb7fc>] (dump_stack) from [<c0013d04>] (handle_IPI+0x148/0x170) [<c0013d04>] (handle_IPI) from [<c00085cc>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085cc>] (armada_370_xp_handle_irq) from [<c0011cc0>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe55b8 00000000 0000094a 00000000 ee876000 c05384ac c03d2d00 ee876000 7fc0: c0565176 00000001 c0565176 ee876000 00000000 ee877fe8 c000eeac c00558b8 7fe0: 60000113 ffffffff [<c0011cc0>] (__irq_svc) from [<c00558b8>] (cpu_startup_entry+0xf4/0x134) [<c00558b8>] (cpu_startup_entry) from [<000086c4>] (0x86c4) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.38 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- Connected to snowball console [channel connected] (~$quit to exit) (user:khilman) is already connected (user:khilman) is already connected ~$hardreset Command(snowball console)> hardreset (user:khilman) Reboot snowball Reboot: snowball ; ip9258 2 2 : ('off', 6, 'on') , sleep 6, KW€**TEJ5UH(W.$Q*ªÔÅJ5ÕHÈ«×-$,kR-..€¬VVHHTÖKW$,X[6normal U-Boot 2009.11 (sept. 19 2011 - 17:03:11) CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version U8500 $ U8500 $ versionversionsetenv ethaddr 6e:e6:84:36:8e:9e setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 Unknown command 'versionversion' - try 'help' U8500 $ U8500 $ setenv ethaddr 6e:e6:84:36:8e:9esetenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $ U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' if test -n ${initenv}; then run initenv; fi if test -n ${preboot}; then run preboot; fi setenv autoload no; setenv autoboot no U8500 $ U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ U8500 $ if test -n ${initenv}; then run initenv; fiif test -n ${initenv}; then run initenv; fi syntax error U8500 $ U8500 $ if test -n ${preboot}; then run preboot; fiif test -n ${preboot}; then run preboot; fi syntax error U8500 $ U8500 $ setenv autoload no; setenv autoboot nosetenv autoload no; setenv autoboot nodhcp U8500 $ U8500 $ dhcpdhcp Unknown command 'dhcpdhcp' - try 'help' U8500 $ U8500 $ ~$off # PYBOOT: Exception: u-boot: does not support DHCP. Giving up. # PYBOOT: Time: 6.21 seconds. # PYBOOT: Result: FAIL

11 years, 2 months

arm-soc boot: 41 pass, 2 fail (v3.14-rc3-479-g87b00e7)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc3-479-g87b00e7 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: mvebu_v7_defconfig ste-snowball: FAIL: multi_v7_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.4 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 50.8 sec am335x-boneblack PASS: 0 min 25.7 sec omap3-beagle-xm PASS: 0 min 56.2 sec legacy,3530beagle PASS: 0 min 38.3 sec omap4-panda PASS: 1 min 10.7 sec omap3-overo-tobi PASS: 0 min 23.5 sec am335x-bone PASS: 0 min 27.6 sec omap3-overo-storm-tobi PASS: 0 min 25.4 sec omap4-panda-es PASS: 1 min 11.0 sec legacy,3730storm PASS: 0 min 23.7 sec legacy,3530overo PASS: 0 min 24.4 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 14.7 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.9 sec imx6q-wandboard PASS: 0 min 17.2 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 14.6 sec sun4i-a10-cubieboard PASS: 0 min 12.6 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 16.1 sec mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 FAIL: 0 min 20.4 sec armada-370-mirabox PASS: 0 min 20.5 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.9 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 30.3 sec tegra30-beaver PASS: 0 min 20.0 sec am335x-boneblack PASS: 0 min 23.9 sec omap3-beagle-xm PASS: 0 min 49.0 sec sun7i-a20-cubieboard2 PASS: 0 min 14.5 sec armada-370-mirabox PASS: 0 min 23.3 sec omap4-panda PASS: 0 min 54.0 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.9 sec sun4i-a10-cubieboard PASS: 0 min 14.4 sec bcm28155-ap PASS: 1 min 9.4 sec omap3-overo-tobi PASS: 0 min 24.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.2 sec am335x-bone PASS: 0 min 26.6 sec omap3-overo-storm-tobi PASS: 0 min 24.4 sec imx6q-wandboard PASS: 0 min 17.3 sec omap4-panda-es PASS: 0 min 52.8 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.4 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 32.9 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 16.5 sec Console logs for failures ========================= mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy -38 Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc3-00479-g87b00e7 #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c92b4>] lr : [<c02c6960>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: eeb25c90 r9 : ee90b000 r8 : ffffffda r7 : ee90b010 r6 : 00000000 r5 : eeb080d0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c0206700 ee910c60 c00ffbcc c0516d30 0000001f de20: ee910c60 00000002 c03ea324 00000000 74726f70 ee910030 00000001 eeb8cc18 de40: 0000008c ee90b010 c054f518 00000000 c054f518 c0516d30 0000008c ee83c030 de60: 00000000 c01cb250 c01cb238 c0588308 ee90b010 c01c99d8 00000007 ee90b010 de80: c054f518 ee90b044 00000000 c01c9c58 00000000 c054f518 c01c9bc0 c01c80d0 dea0: ee85a7dc ee85e134 c054f518 eeb25d00 c054e478 c01c9280 c0499614 c05652c0 dec0: c054f518 c054f518 00000006 c05652c0 c05652c0 c01ca29c 00000000 c052c980 dee0: 00000006 c0516d60 c052c980 c000893c 0000008c ef7fce08 c04810f0 00000000 df00: 00000000 c04df2e0 00000063 ee83df20 c0035d80 c0035da4 00000113 ffffffff df20: ef7fce1b c03e3b20 0000008c c0035f74 c04dea80 00000006 ef7fce26 00000006 df40: c053deb0 c052c980 00000006 c05652c0 c05652c0 c050250c 0000008c c0525d14 df60: c0525d08 c0502c40 00000006 00000006 c050250c d456fc5d 0fbbed6f 4faffddf df80: fbff7bce 00000000 c03c6ffc 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03c7004 00000000 c000e338 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff5 dd7dfd3b [<c02c92b4>] (__clk_put) from [<c0206700>] (mv_platform_probe+0x2ac/0x414) [<c0206700>] (mv_platform_probe) from [<c01cb250>] (platform_drv_probe+0x18/0x48) [<c01cb250>] (platform_drv_probe) from [<c01c99d8>] (really_probe+0x80/0x214) [<c01c99d8>] (really_probe) from [<c01c9c58>] (__driver_attach+0x98/0x9c) [<c01c9c58>] (__driver_attach) from [<c01c80d0>] (bus_for_each_dev+0x60/0x94) [<c01c80d0>] (bus_for_each_dev) from [<c01c9280>] (bus_add_driver+0x148/0x1f0) [<c01c9280>] (bus_add_driver) from [<c01ca29c>] (driver_register+0x78/0xf8) [<c01ca29c>] (driver_register) from [<c0516d60>] (mv_init+0x30/0x50) [<c0516d60>] (mv_init) from [<c000893c>] (do_one_initcall+0xf8/0x144) [<c000893c>] (do_one_initcall) from [<c0502c40>] (kernel_init_freeable+0x138/0x1d8) [<c0502c40>] (kernel_init_freeable) from [<c03c7004>] (kernel_init+0x8/0xf0) [<c03c7004>] (kernel_init) from [<c000e338>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace dc88c311e9a47e22 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc3-00479-g87b00e7 #1 [<c0014940>] (unwind_backtrace) from [<c0011194>] (show_stack+0x10/0x14) [<c0011194>] (show_stack) from [<c03cb7fc>] (dump_stack+0x80/0x90) [<c03cb7fc>] (dump_stack) from [<c0013d04>] (handle_IPI+0x148/0x170) [<c0013d04>] (handle_IPI) from [<c00085cc>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085cc>] (armada_370_xp_handle_irq) from [<c0011cc0>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe55b8 00000000 00000948 00000000 ee876000 c05384ac c03d2d00 ee876000 7fc0: c0565176 00000001 c0565176 ee876000 00000000 ee877fe8 c000eeac c00558b8 7fe0: 60000113 ffffffff [<c0011cc0>] (__irq_svc) from [<c00558b8>] (cpu_startup_entry+0xf4/0x134) [<c00558b8>] (cpu_startup_entry) from [<000086c4>] (0x86c4) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.37 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- Command(snowball console)> hardreset (user:khilman) Reboot snowball Reboot: snowball ; ip9258 2 2 : ('off', 6, 'on') , sleep 6, MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version U8500 $ versionsetenv ethaddr 6e:e6:84:36:8e:9e U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9esetenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi U8500 $ if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no U8500 $ setenv autoload no; setenv autoboot nodhcp U8500 $ dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $tftp 0x00800000 192.168.1.2:tmp/snowball-KTBmeG/tmpD1Utap-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-KTBmeG/tmpD1Utap-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-KTBmeG/tmpD1Utap-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## done Bytes transferred = 4541841 (454d91 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4541777 Bytes = 4.3 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.29 seconds. # PYBOOT: Result: FAIL

11 years, 2 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

linaro-kernel