greybus-dev

greybus-dev@lists.linaro.org

9 participants
573 discussions

[PATCH] staging: greybus: Remove unnecessary platform_set_drvdata

by Amitoj Kaur Chawla

Unnecessary platform_set_drvdata() has been removed since the driver core clears the driver data to NULL after device release or on probe failure. There is no need to manually clear the device driver data to NULL. The Coccinelle semantic patch used to make this change is as follows: //<smpl> @@ struct platform_device *pdev; @@ - platform_set_drvdata(pdev, NULL); //</smpl> Signed-off-by: Amitoj Kaur Chawla <amitoj1606(a)gmail.com> --- drivers/staging/greybus/arche-platform.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/staging/greybus/arche-platform.c b/drivers/staging/greybus/arche-platform.c index eced2d2..358b260 100644 --- a/drivers/staging/greybus/arche-platform.c +++ b/drivers/staging/greybus/arche-platform.c @@ -607,7 +607,6 @@ static int arche_platform_remove(struct platform_device *pdev) device_remove_file(&pdev->dev, &dev_attr_state); device_for_each_child(&pdev->dev, NULL, arche_remove_child); arche_platform_poweroff_seq(arche_pdata); - platform_set_drvdata(pdev, NULL); if (usb3613_hub_mode_ctrl(false)) dev_warn(arche_pdata->dev, "failed to control hub device\n"); -- 2.7.4

7 years, 10 months

[PATCH] staging: greybus: fix parenthesis alignments

by Diwakar Sharma

Parenthesis alignment issues reported by checkpatch, fixed here. Signed-off-by: Diwakar Sharma <sharmalxmail(a)gmail.com> --- drivers/staging/greybus/interface.c | 40 ++++++++++++++++++------------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/drivers/staging/greybus/interface.c b/drivers/staging/greybus/interface.c index a4fd516..71e5cc2 100644 --- a/drivers/staging/greybus/interface.c +++ b/drivers/staging/greybus/interface.c @@ -47,7 +47,7 @@ static int gb_interface_refclk_set(struct gb_interface *intf, bool enable); static int gb_interface_dme_attr_get(struct gb_interface *intf, - u16 attr, u32 *val) + u16 attr, u32 *val) { return gb_svc_dme_peer_get(intf->hd->svc, intf->interface_id, attr, DME_SELECTOR_INDEX_NULL, val); @@ -64,7 +64,7 @@ static int gb_interface_read_ara_dme(struct gb_interface *intf) */ if (intf->ddbl1_manufacturer_id != TOSHIBA_DMID) { dev_err(&intf->dev, "unknown manufacturer %08x\n", - intf->ddbl1_manufacturer_id); + intf->ddbl1_manufacturer_id); return -ENODEV; } @@ -110,7 +110,7 @@ static int gb_interface_read_dme(struct gb_interface *intf) return ret; if (intf->ddbl1_manufacturer_id == TOSHIBA_DMID && - intf->ddbl1_product_id == TOSHIBA_ES2_BRIDGE_DPID) { + intf->ddbl1_product_id == TOSHIBA_ES2_BRIDGE_DPID) { intf->quirks |= GB_INTERFACE_QUIRK_NO_GMP_IDS; intf->quirks |= GB_INTERFACE_QUIRK_NO_INIT_STATUS; } @@ -144,7 +144,7 @@ static int gb_interface_route_create(struct gb_interface *intf) ret = gb_svc_intf_device_id(svc, intf_id, device_id); if (ret) { dev_err(&intf->dev, "failed to set device id %u: %d\n", - device_id, ret); + device_id, ret); goto err_ida_remove; } @@ -205,21 +205,21 @@ static int gb_interface_legacy_mode_switch(struct gb_interface *intf) } void gb_interface_mailbox_event(struct gb_interface *intf, u16 result, - u32 mailbox) + u32 mailbox) { mutex_lock(&intf->mutex); if (result) { dev_warn(&intf->dev, - "mailbox event with UniPro error: 0x%04x\n", - result); + "mailbox event with UniPro error: 0x%04x\n", + result); goto err_disable; } if (mailbox != GB_SVC_INTF_MAILBOX_GREYBUS) { dev_warn(&intf->dev, - "mailbox event with unexpected value: 0x%08x\n", - mailbox); + "mailbox event with unexpected value: 0x%08x\n", + mailbox); goto err_disable; } @@ -230,7 +230,7 @@ void gb_interface_mailbox_event(struct gb_interface *intf, u16 result, if (!intf->mode_switch) { dev_warn(&intf->dev, "unexpected mailbox event: 0x%08x\n", - mailbox); + mailbox); goto err_disable; } @@ -299,7 +299,7 @@ static void gb_interface_mode_switch_work(struct work_struct *work) ret = gb_interface_enable(intf); if (ret) { dev_err(&intf->dev, "failed to re-enable interface: %d\n", - ret); + ret); gb_interface_deactivate(intf); } } @@ -619,7 +619,7 @@ static ssize_t interface_type_show(struct device *dev, }; static umode_t interface_unipro_is_visible(struct kobject *kobj, - struct attribute *attr, int n) + struct attribute *attr, int n) { struct device *dev = container_of(kobj, struct device, kobj); struct gb_interface *intf = to_gb_interface(dev); @@ -634,7 +634,7 @@ static umode_t interface_unipro_is_visible(struct kobject *kobj, } static umode_t interface_greybus_is_visible(struct kobject *kobj, - struct attribute *attr, int n) + struct attribute *attr, int n) { struct device *dev = container_of(kobj, struct device, kobj); struct gb_interface *intf = to_gb_interface(dev); @@ -648,7 +648,7 @@ static umode_t interface_greybus_is_visible(struct kobject *kobj, } static umode_t interface_power_is_visible(struct kobject *kobj, - struct attribute *attr, int n) + struct attribute *attr, int n) { struct device *dev = container_of(kobj, struct device, kobj); struct gb_interface *intf = to_gb_interface(dev); @@ -813,7 +813,7 @@ struct gb_interface *gb_interface_create(struct gb_module *module, intf->dev.dma_mask = module->dev.dma_mask; device_initialize(&intf->dev); dev_set_name(&intf->dev, "%s.%u", dev_name(&module->dev), - interface_id); + interface_id); pm_runtime_set_autosuspend_delay(&intf->dev, GB_INTERFACE_AUTOSUSPEND_MS); @@ -1083,7 +1083,7 @@ int gb_interface_enable(struct gb_interface *intf) control = gb_control_create(intf); if (IS_ERR(control)) { dev_err(&intf->dev, "failed to create control device: %ld\n", - PTR_ERR(control)); + PTR_ERR(control)); return PTR_ERR(control); } intf->control = control; @@ -1228,17 +1228,17 @@ int gb_interface_add(struct gb_interface *intf) trace_gb_interface_add(intf); dev_info(&intf->dev, "Interface added (%s)\n", - gb_interface_type_string(intf)); + gb_interface_type_string(intf)); switch (intf->type) { case GB_INTERFACE_TYPE_GREYBUS: dev_info(&intf->dev, "GMP VID=0x%08x, PID=0x%08x\n", - intf->vendor_id, intf->product_id); + intf->vendor_id, intf->product_id); /* fall-through */ case GB_INTERFACE_TYPE_UNIPRO: dev_info(&intf->dev, "DDBL1 Manufacturer=0x%08x, Product=0x%08x\n", - intf->ddbl1_manufacturer_id, - intf->ddbl1_product_id); + intf->ddbl1_manufacturer_id, + intf->ddbl1_product_id); break; default: break; -- 1.9.1

7 years, 10 months

[PATCH] staging: greybus: loopback: Enclose multiple macro statements in do-while loop

by karthik＠techveda.org

From: Karthik Tummala <karthik(a)techveda.org> Enclosed multiple macro statements in a do - while loop as per kernel coding standard, pointed by checkpatch. Signed-off-by: Karthik Tummala <karthik(a)techveda.org> --- drivers/staging/greybus/loopback.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/staging/greybus/loopback.c b/drivers/staging/greybus/loopback.c index 08e2558..c616555 100644 --- a/drivers/staging/greybus/loopback.c +++ b/drivers/staging/greybus/loopback.c @@ -176,10 +176,12 @@ static DEVICE_ATTR_RO(name##_##field) } \ static DEVICE_ATTR_RO(name##_avg) -#define gb_loopback_stats_attrs(field) \ - gb_loopback_ro_stats_attr(field, min, u); \ - gb_loopback_ro_stats_attr(field, max, u); \ - gb_loopback_ro_avg_attr(field) +#define gb_loopback_stats_attrs(field) \ +do { \ + gb_loopback_ro_stats_attr(field, min, u); \ + gb_loopback_ro_stats_attr(field, max, u); \ + gb_loopback_ro_avg_attr(field); \ +} while (0) #define gb_loopback_attr(field, type) \ static ssize_t field##_show(struct device *dev, \ -- 1.9.1

7 years, 11 months

[PATCH] staging: greybus: arche: wrap over-length lines

by Mitchell Tasman

Adjust formatting of various statements to keep line length within the 80 column limit preferred by the Linux kernel coding style. Signed-off-by: Mitchell Tasman <tasman(a)leaflabs.com> --- drivers/staging/greybus/arche-platform.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/drivers/staging/greybus/arche-platform.c b/drivers/staging/greybus/arche-platform.c index eced2d2..c386c13 100644 --- a/drivers/staging/greybus/arche-platform.c +++ b/drivers/staging/greybus/arche-platform.c @@ -172,15 +172,21 @@ static irqreturn_t arche_platform_wd_irq(int irq, void *devid) if (arche_pdata->wake_detect_state == WD_STATE_BOOT_INIT) { if (time_before(jiffies, arche_pdata->wake_detect_start + - msecs_to_jiffies(WD_COLDBOOT_PULSE_WIDTH_MS))) { - arche_platform_set_wake_detect_state(arche_pdata, - WD_STATE_IDLE); + msecs_to_jiffies( + WD_COLDBOOT_PULSE_WIDTH_MS))) { + arche_platform_set_wake_detect_state( + arche_pdata, + WD_STATE_IDLE); } else { - /* Check we are not in middle of irq thread already */ + /* + * Check we are not in middle of irq thread + * already + */ if (arche_pdata->wake_detect_state != WD_STATE_COLDBOOT_START) { - arche_platform_set_wake_detect_state(arche_pdata, - WD_STATE_COLDBOOT_TRIG); + arche_platform_set_wake_detect_state( + arche_pdata, + WD_STATE_COLDBOOT_TRIG); spin_unlock_irqrestore( &arche_pdata->wake_lock, flags); @@ -199,8 +205,9 @@ static irqreturn_t arche_platform_wd_irq(int irq, void *devid) * beyond 30msec, then it is coldboot else fallback * to standby boot. */ - arche_platform_set_wake_detect_state(arche_pdata, - WD_STATE_BOOT_INIT); + arche_platform_set_wake_detect_state( + arche_pdata, + WD_STATE_BOOT_INIT); } } @@ -657,12 +664,14 @@ static SIMPLE_DEV_PM_OPS(arche_platform_pm_ops, arche_platform_resume); static const struct of_device_id arche_platform_of_match[] = { - { .compatible = "google,arche-platform", }, /* Use PID/VID of SVC device */ + /* Use PID/VID of SVC device*/ + { .compatible = "google,arche-platform", }, { }, }; static const struct of_device_id arche_combined_id[] = { - { .compatible = "google,arche-platform", }, /* Use PID/VID of SVC device */ + /* Use PID/VID of SVC device */ + { .compatible = "google,arche-platform", }, { .compatible = "usbffff,2", }, { }, }; -- 2.9.3

7 years, 11 months

[PATCH] staging: greybus: loopback_test: fix comment style issue

by Aleksey Rybalkin

According to checkpatch warning, block comments should align the * on each line. Signed-off-by: Aleksey Rybalkin <aleksey(a)rybalkin.org> --- drivers/staging/greybus/tools/loopback_test.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/staging/greybus/tools/loopback_test.c b/drivers/staging/greybus/tools/loopback_test.c index 32a43693181c..bcb1c36889ce 100644 --- a/drivers/staging/greybus/tools/loopback_test.c +++ b/drivers/staging/greybus/tools/loopback_test.c @@ -528,11 +528,11 @@ static int log_results(struct loopback_test *t) tm = *localtime(&local_time); /* - * file name will test_name_size_iteration_max.csv - * every time the same test with the same parameters is run we will then - * append to the same CSV with datestamp - representing each test - * dataset. - */ + * file name will test_name_size_iteration_max.csv + * every time the same test with the same parameters is run we will then + * append to the same CSV with datestamp - representing each test + * dataset. + */ if (t->file_output && !t->porcelain) { snprintf(file_name, sizeof(file_name), "%s_%d_%d.csv", t->test_name, t->size, t->iteration_max); -- 2.13.2

7 years, 11 months

[PATCH] staging: greybus: mark PM functions as __maybe_unused

by Arnd Bergmann

Enabling the arche platform for compile testing showed a harmless warning with CONFIG_PM=n: drivers/staging/greybus/arche-platform.c:632:12: error: 'arche_platform_resume' defined but not used [-Werror=unused-function] drivers/staging/greybus/arche-platform.c:618:12: error: 'arche_platform_suspend' defined but not used [-Werror=unused-function] This marks the functions as __maybe_unused to shut up the warnings. Fixes: 2eccd4aa19fc ("staging: greybus: enable compile testing of arche driver") Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> --- drivers/staging/greybus/arche-platform.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/greybus/arche-platform.c b/drivers/staging/greybus/arche-platform.c index 5bce5e039596..eced2d26467b 100644 --- a/drivers/staging/greybus/arche-platform.c +++ b/drivers/staging/greybus/arche-platform.c @@ -615,7 +615,7 @@ static int arche_platform_remove(struct platform_device *pdev) return 0; } -static int arche_platform_suspend(struct device *dev) +static __maybe_unused int arche_platform_suspend(struct device *dev) { /* * If timing profile premits, we may shutdown bridge @@ -629,7 +629,7 @@ static int arche_platform_suspend(struct device *dev) return 0; } -static int arche_platform_resume(struct device *dev) +static __maybe_unused int arche_platform_resume(struct device *dev) { /* * Atleast for ES2 we have to meet the delay requirement between -- 2.9.0

8 years

[PATCH v2 0/2] staging: greybus: fix arche driver compilation

by Johan Hovold

The arche driver currently depends on the out-of-tree usb3613 driver and this prevented a recent compile breakage after removing the timesync code from being detected. These patches remove the remaining timesync bits, and enable compile testing of the arche driver to avoid further unintended breakage. Johan Changes in v2 - fix usb3613 Kconfig dependency (Randy Dunlap) Johan Hovold (2): staging: greybus: arche: remove timesync remains staging: greybus: enable compile testing of arche driver drivers/staging/greybus/Kconfig | 10 +++ drivers/staging/greybus/Makefile | 2 +- drivers/staging/greybus/arche-apb-ctrl.c | 11 +-- drivers/staging/greybus/arche-platform.c | 150 ++----------------------------- drivers/staging/greybus/arche_platform.h | 8 -- 5 files changed, 21 insertions(+), 160 deletions(-) -- 2.13.0

8 years

[PATCH 0/2] staging: greybus: fix arche driver compilation

by Johan Hovold

The arche driver currently depends on the out-of-tree usb3613 driver and this prevented a recent compile breakage after removing the timesync code from being detected. These patches remove the remaining timesync bits, and enable compile testing of the arche driver to avoid further unintended breakage. Johan Johan Hovold (2): staging: greybus: arche: remove timesync remains staging: greybus: enable compile testing of arche driver drivers/staging/greybus/Kconfig | 10 +++ drivers/staging/greybus/Makefile | 2 +- drivers/staging/greybus/arche-apb-ctrl.c | 11 +-- drivers/staging/greybus/arche-platform.c | 150 ++----------------------------- drivers/staging/greybus/arche_platform.h | 8 -- 5 files changed, 21 insertions(+), 160 deletions(-) -- 2.13.0

8 years

[PATCH] staging: greybus: power_supply: replace kzalloc by kcalloc

by JB Van Puyvelde

According to checkpatch.pl, kcalloc should be preferred to kzalloc with multiply. Signed-off-by: JB Van Puyvelde <jbvanpuyvelde(a)gmail.com> --- drivers/staging/greybus/power_supply.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/greybus/power_supply.c b/drivers/staging/greybus/power_supply.c index e85c988b7034..20cac20518d7 100644 --- a/drivers/staging/greybus/power_supply.c +++ b/drivers/staging/greybus/power_supply.c @@ -944,7 +944,7 @@ static int gb_power_supplies_setup(struct gb_power_supplies *supplies) if (ret < 0) goto out; - supplies->supply = kzalloc(supplies->supplies_count * + supplies->supply = kcalloc(supplies->supplies_count, sizeof(struct gb_power_supply), GFP_KERNEL); -- 2.11.0

8 years, 1 month

[PATCH] staging: greybus: power_supply: replace kzalloc by kcalloc

by JB Van Puyvelde

8 years, 1 month

← Newer
1
...
48
49
50
51
52
53
54
...
58
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

greybus-dev