greybus-dev

greybus-dev@lists.linaro.org

2 participants
586 discussions

[PATCH v3] staging: greybus: audio: fix uninitialized value issue

by Vaibhav Agarwal

The current implementation for gbcodec_mixer_dapm_ctl_put() uses uninitialized gbvalue for comparison with updated value. This was found using static analysis with coverity. Uninitialized scalar variable (UNINIT) 11. uninit_use: Using uninitialized value gbvalue.value.integer_value[0]. 460 if (gbvalue.value.integer_value[0] != val) { This patch fixes the issue with fetching the gbvalue before using it for comparision. Fixes: 6339d2322c47 ("greybus: audio: Add topology parser for GB codec") Reported-by: Colin Ian King <colin.king(a)canonical.com> Signed-off-by: Vaibhav Agarwal <vaibhav.sr(a)gmail.com> --- Changelog: v2: Fix the missing check for return value after get_control. v3: Use single exit path to avoid missing autosuspend sequence. --- drivers/staging/greybus/audio_topology.c | 29 ++++++++++++------------ 1 file changed, 15 insertions(+), 14 deletions(-) diff --git a/drivers/staging/greybus/audio_topology.c b/drivers/staging/greybus/audio_topology.c index 2f9fdbdcd547..83b38ae8908c 100644 --- a/drivers/staging/greybus/audio_topology.c +++ b/drivers/staging/greybus/audio_topology.c @@ -456,6 +456,15 @@ static int gbcodec_mixer_dapm_ctl_put(struct snd_kcontrol *kcontrol, val = ucontrol->value.integer.value[0] & mask; connect = !!val; + ret = gb_pm_runtime_get_sync(bundle); + if (ret) + return ret; + + ret = gb_audio_gb_get_control(module->mgmt_connection, data->ctl_id, + GB_AUDIO_INVALID_INDEX, &gbvalue); + if (ret) + goto exit; + /* update ucontrol */ if (gbvalue.value.integer_value[0] != val) { for (wi = 0; wi < wlist->num_widgets; wi++) { @@ -466,25 +475,17 @@ static int gbcodec_mixer_dapm_ctl_put(struct snd_kcontrol *kcontrol, gbvalue.value.integer_value[0] = cpu_to_le32(ucontrol->value.integer.value[0]); - ret = gb_pm_runtime_get_sync(bundle); - if (ret) - return ret; - ret = gb_audio_gb_set_control(module->mgmt_connection, data->ctl_id, GB_AUDIO_INVALID_INDEX, &gbvalue); - - gb_pm_runtime_put_autosuspend(bundle); - - if (ret) { - dev_err_ratelimited(codec_dev, - "%d:Error in %s for %s\n", ret, - __func__, kcontrol->id.name); - return ret; - } } - return 0; +exit: + gb_pm_runtime_put_autosuspend(bundle); + if (ret) + dev_err_ratelimited(codec_dev, "%d:Error in %s for %s\n", ret, + __func__, kcontrol->id.name); + return ret; } #define SOC_DAPM_MIXER_GB(xname, kcount, data) \ base-commit: fc80c51fd4b23ec007e88d4c688f2cac1b8648e7 -- 2.27.0

4 years, 11 months

[PATCH v2] staging: greybus: audio: fix uninitialized value issue

by Vaibhav Agarwal

The current implementation for gbcodec_mixer_dapm_ctl_put() uses uninitialized gbvalue for comparison with updated value. This was found using static analysis with coverity. Uninitialized scalar variable (UNINIT) 11. uninit_use: Using uninitialized value gbvalue.value.integer_value[0]. 460 if (gbvalue.value.integer_value[0] != val) { This patch fixes the issue with fetching the gbvalue before using it for comparision. Fixes: 6339d2322c47 ("greybus: audio: Add topology parser for GB codec") Reported-by: Colin Ian King <colin.king(a)canonical.com> Signed-off-by: Vaibhav Agarwal <vaibhav.sr(a)gmail.com> --- Changelog: v2: Fix the missing check for return value after get_control. --- drivers/staging/greybus/audio_topology.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/staging/greybus/audio_topology.c b/drivers/staging/greybus/audio_topology.c index 2f9fdbdcd547..9f98691b2f5f 100644 --- a/drivers/staging/greybus/audio_topology.c +++ b/drivers/staging/greybus/audio_topology.c @@ -456,6 +456,18 @@ static int gbcodec_mixer_dapm_ctl_put(struct snd_kcontrol *kcontrol, val = ucontrol->value.integer.value[0] & mask; connect = !!val; + ret = gb_pm_runtime_get_sync(bundle); + if (ret) + return ret; + + ret = gb_audio_gb_get_control(module->mgmt_connection, data->ctl_id, + GB_AUDIO_INVALID_INDEX, &gbvalue); + if (ret) { + dev_err_ratelimited(codec_dev, "%d:Error in %s for %s\n", ret, + __func__, kcontrol->id.name); + return ret; + } + /* update ucontrol */ if (gbvalue.value.integer_value[0] != val) { for (wi = 0; wi < wlist->num_widgets; wi++) { @@ -466,16 +478,10 @@ static int gbcodec_mixer_dapm_ctl_put(struct snd_kcontrol *kcontrol, gbvalue.value.integer_value[0] = cpu_to_le32(ucontrol->value.integer.value[0]); - ret = gb_pm_runtime_get_sync(bundle); - if (ret) - return ret; - ret = gb_audio_gb_set_control(module->mgmt_connection, data->ctl_id, GB_AUDIO_INVALID_INDEX, &gbvalue); - gb_pm_runtime_put_autosuspend(bundle); - if (ret) { dev_err_ratelimited(codec_dev, "%d:Error in %s for %s\n", ret, @@ -483,6 +489,7 @@ static int gbcodec_mixer_dapm_ctl_put(struct snd_kcontrol *kcontrol, return ret; } } + gb_pm_runtime_put_autosuspend(bundle); return 0; } base-commit: fc80c51fd4b23ec007e88d4c688f2cac1b8648e7 -- 2.27.0

4 years, 11 months

[PATCH v1] staging: greybus: audio: fix uninitialized value issue

by Vaibhav Agarwal

The current implementation for gbcodec_mixer_dapm_ctl_put() uses uninitialized gbvalue for comparison with updated value. This was found using static analysis with coverity. Uninitialized scalar variable (UNINIT) 11. uninit_use: Using uninitialized value gbvalue.value.integer_value[0]. 460 if (gbvalue.value.integer_value[0] != val) { This patch fixes the issue with fetching the gbvalue before using it for comparision. Fixes: 6339d2322c47 ("greybus: audio: Add topology parser for GB codec") Reported-by: Colin Ian King <colin.king(a)canonical.com> Signed-off-by: Vaibhav Agarwal <vaibhav.sr(a)gmail.com> --- drivers/staging/greybus/audio_topology.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/staging/greybus/audio_topology.c b/drivers/staging/greybus/audio_topology.c index 2f9fdbdcd547..4b914d0edef2 100644 --- a/drivers/staging/greybus/audio_topology.c +++ b/drivers/staging/greybus/audio_topology.c @@ -456,6 +456,13 @@ static int gbcodec_mixer_dapm_ctl_put(struct snd_kcontrol *kcontrol, val = ucontrol->value.integer.value[0] & mask; connect = !!val; + ret = gb_pm_runtime_get_sync(bundle); + if (ret) + return ret; + + ret = gb_audio_gb_get_control(module->mgmt_connection, data->ctl_id, + GB_AUDIO_INVALID_INDEX, &gbvalue); + /* update ucontrol */ if (gbvalue.value.integer_value[0] != val) { for (wi = 0; wi < wlist->num_widgets; wi++) { @@ -466,16 +473,10 @@ static int gbcodec_mixer_dapm_ctl_put(struct snd_kcontrol *kcontrol, gbvalue.value.integer_value[0] = cpu_to_le32(ucontrol->value.integer.value[0]); - ret = gb_pm_runtime_get_sync(bundle); - if (ret) - return ret; - ret = gb_audio_gb_set_control(module->mgmt_connection, data->ctl_id, GB_AUDIO_INVALID_INDEX, &gbvalue); - gb_pm_runtime_put_autosuspend(bundle); - if (ret) { dev_err_ratelimited(codec_dev, "%d:Error in %s for %s\n", ret, @@ -483,6 +484,7 @@ static int gbcodec_mixer_dapm_ctl_put(struct snd_kcontrol *kcontrol, return ret; } } + gb_pm_runtime_put_autosuspend(bundle); return 0; } base-commit: 5bbd90550da8f7bdac769b5825597e67183c9411 prerequisite-patch-id: 2b8901339222ff7b94f10cf2341734c0fb82591c prerequisite-patch-id: 38dad8879a2b73bce6e89481973c7c5b82bd7145 prerequisite-patch-id: 5f0042ccedae292395ec617789be6bf465463c1c prerequisite-patch-id: 35d001c366dfa4b567e59abbb37bd691a18f5e14 prerequisite-patch-id: f13ce918ebc3796cd3c81716a7b2adf4519e7387 prerequisite-patch-id: 0fcc6d38699a9b72ca94280d7a4dc18f0823b6f7 prerequisite-patch-id: 8074e935bdc3dd7b114245b0648552d0ff6871c9 -- 2.27.0

4 years, 12 months

issue with uninitialized value used in a comparison in gbcodec_mixer_dapm_ctl_put

by Colin Ian King

Hi, Static analysis with Coverity has detected an uninitialized value being used in a comparison. The error was detected on a recent change to drivers/staging/greybus/audio_topology.c however the issue actually dates back to the original commit: commit 6339d2322c47f4b8ebabf9daf0130328ed72648b Author: Vaibhav Agarwal <vaibhav.agarwal(a)linaro.org> Date: Wed Jan 13 14:07:51 2016 -0700 greybus: audio: Add topology parser for GB codec The analysis is as follows: 425 static int gbcodec_mixer_dapm_ctl_put(struct snd_kcontrol *kcontrol, 426 struct snd_ctl_elem_value *ucontrol) 427 { 428 int ret, wi, max, connect; 429 unsigned int mask, val; 430 struct gb_audio_ctl_elem_info *info; 431 struct gbaudio_ctl_pvt *data; 1. var_decl: Declaring variable gbvalue without initializer. 432 struct gb_audio_ctl_elem_value gbvalue; 433 struct gbaudio_module_info *module; 434 struct snd_soc_dapm_widget_list *wlist = snd_kcontrol_chip(kcontrol); 435 struct snd_soc_dapm_widget *widget = wlist->widgets[0]; 436 struct device *codec_dev = widget->dapm->dev; 437 struct gbaudio_codec_info *gb = dev_get_drvdata(codec_dev); 438 struct gb_bundle *bundle; 439 2. Condition 0 /* __builtin_types_compatible_p() */, taking false branch. 3. Condition 1 /* __builtin_types_compatible_p() */, taking true branch. 4. Falling through to end of if statement. 5. Condition !!branch, taking false branch. 6. Condition ({...; !!branch;}), taking false branch. 440 dev_dbg(codec_dev, "Entered %s:%s\n", __func__, kcontrol->id.name); 441 module = find_gb_module(gb, kcontrol->id.name); 7. Condition !module, taking false branch. 442 if (!module) 443 return -EINVAL; 444 445 data = (struct gbaudio_ctl_pvt *)kcontrol->private_value; 446 info = (struct gb_audio_ctl_elem_info *)data->info; 8. Condition 0 /* !!(!__builtin_types_compatible_p() && !__builtin_types_compatible_p()) */, taking false branch. 447 bundle = to_gb_bundle(module->dev); 448 9. Condition data->vcount == 2, taking true branch. 449 if (data->vcount == 2) 450 dev_warn(widget->dapm->dev, 451 "GB: Control '%s' is stereo, which is not supported\n", 452 kcontrol->id.name); 453 454 max = le32_to_cpu(info->value.integer.max); 455 mask = (1 << fls(max)) - 1; 456 val = ucontrol->value.integer.value[0] & mask; 10. Condition !!val, taking true branch. 457 connect = !!val; 458 459 /* update ucontrol */ Uninitialized scalar variable (UNINIT) 11. uninit_use: Using uninitialized value gbvalue.value.integer_value[0]. 460 if (gbvalue.value.integer_value[0] != val) { The gbvalue.value.integer_value[0] read is bogus since gbvalue was declared on the stack but was not initialized. There seems to be no where that sets this data. I'm assuming most of the time that the comparison works because the garbage value is different from val and so the code in the if stanza is executed. Anyhow, I'm unsure what the original intent of the code was, so I've not attempted to fix this. Colin

5 years

[PATCH v4 0/7] Enable Greybus Audio codec driver

by Vaibhav Agarwal

The existing GB Audio codec driver is dependent on MSM8994 Audio driver. During the development stage, this dependency was configured due to various changes involved in MSM Audio driver to enable addtional codec card and some of the changes proposed in mainline ASoC framework. However, these are not the real dependencies and some of them can be easily removed. The folowing patch series includes the changes to resolve unnecessary depedencies and make the codec driver functional with the latest kernel. Patch 1,2: Incudes jack framework related changes. Patch 3,4,5: Resolves compilation error observed with the latest kernel and also provides helper APIs required to allow dynamic addition/removal of modules. Patch 6: Finally provides config options and related Makefile changes to enable GB Codec driver. Thanks to Alexandre for raising the headsup [1] and motivating me to provide the necessary changes. This patchset is intended to resolve the componentization issue only. And as per the suggestion [2] from Mark, I'll share a separate patch series aligned to ASoC tree. Once the relevant changes are accepted in snd-soc framework, I'll share relevant patches to pull GB Audio out of the staging tree. v1: - Include the changes for the review comments suggested by Dan - Rebase to latest staging-next v2: - Avoid defining unused 'update' pointer - Fix the missing connect bool value required during mixer_update_power - Added Reviewed-by tag from Dan - Rebase to latest staging-next v3: - Fix the warnings reported by lkp[3] - Rebase to latest staging-next [1] https://lore.kernel.org/lkml/20200507212912.599433-1-alexandre.belloni@boot… [2] https://lore.kernel.org/alsa-devel/20200612160620.GK5396@sirena.org.uk/ [3] https://lore.kernel.org/lkml/202006200150.mNVj1Duq%25lkp@intel.com/ Vaibhav Agarwal (7): staging: greybus: audio: Update snd_jack FW usage as per new APIs staging: greybus: audio: Maintain jack list within GB Audio module staging: greybus: audio: Resolve compilation errors for GB codec module staging: greybus: audio: Resolve compilation error in topology parser staging: greybus: audio: Add helper APIs for dynamic audio modules staging: greybus: audio: Enable GB codec, audio module compilation. drivers: staging: audio: Fix the missing header file for helper file drivers/staging/greybus/Kconfig | 14 +- drivers/staging/greybus/Makefile | 6 +- drivers/staging/greybus/audio_codec.c | 178 +++++++++++--------- drivers/staging/greybus/audio_codec.h | 12 +- drivers/staging/greybus/audio_helper.c | 198 +++++++++++++++++++++++ drivers/staging/greybus/audio_helper.h | 17 ++ drivers/staging/greybus/audio_module.c | 15 +- drivers/staging/greybus/audio_topology.c | 131 +++++++-------- 8 files changed, 414 insertions(+), 157 deletions(-) create mode 100644 drivers/staging/greybus/audio_helper.c create mode 100644 drivers/staging/greybus/audio_helper.h base-commit: 14442181d20490945f341644bb8257e334b01447 -- 2.27.0

5 years

[PATCH][next] greybus: Use fallthrough pseudo-keyword

by Gustavo A. R. Silva

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fall… Signed-off-by: Gustavo A. R. Silva <gustavoars(a)kernel.org> --- drivers/greybus/es2.c | 2 +- drivers/greybus/interface.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/greybus/es2.c b/drivers/greybus/es2.c index 366716f11b1a..1df6ab5d339d 100644 --- a/drivers/greybus/es2.c +++ b/drivers/greybus/es2.c @@ -759,7 +759,7 @@ static int check_urb_status(struct urb *urb) case -EOVERFLOW: dev_err(dev, "%s: overflow actual length is %d\n", __func__, urb->actual_length); - /* fall through */ + fallthrough; case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: diff --git a/drivers/greybus/interface.c b/drivers/greybus/interface.c index 67dbe6fda9a1..58ea374d8aaa 100644 --- a/drivers/greybus/interface.c +++ b/drivers/greybus/interface.c @@ -1233,7 +1233,7 @@ int gb_interface_add(struct gb_interface *intf) case GB_INTERFACE_TYPE_GREYBUS: dev_info(&intf->dev, "GMP VID=0x%08x, PID=0x%08x\n", intf->vendor_id, intf->product_id); - /* fall-through */ + fallthrough; case GB_INTERFACE_TYPE_UNIPRO: dev_info(&intf->dev, "DDBL1 Manufacturer=0x%08x, Product=0x%08x\n", intf->ddbl1_manufacturer_id, -- 2.27.0

5 years

[PATCH] staging: greybus: audio: Uninitialized variable in gbaudio_remove_controls()

by Dan Carpenter

The "err" variable is not meaningful so there is no need to print it. It's uninitialized on the first iteration through the loop. Fixes: 510e340efe0c ("staging: greybus: audio: Add helper APIs for dynamic audio modules") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> --- drivers/staging/greybus/audio_helper.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/staging/greybus/audio_helper.c b/drivers/staging/greybus/audio_helper.c index 8b100a71f02e..237531ba60f3 100644 --- a/drivers/staging/greybus/audio_helper.c +++ b/drivers/staging/greybus/audio_helper.c @@ -173,8 +173,7 @@ static int gbaudio_remove_controls(struct snd_card *card, struct device *dev, id.index = control->index; kctl = snd_ctl_find_id(card, &id); if (!kctl) { - dev_err(dev, "%d: Failed to find %s\n", err, - control->name); + dev_err(dev, "Failed to find %s\n", control->name); continue; } err = snd_ctl_remove(card, kctl); -- 2.27.0

5 years

[PATCH] RFC : mikroBUS driver for add-on boards

by Vaishnav M A

Attached is a patch for the mikroBUS driver which helps to instantiate an add-on board device on a mikrobus port by fetching the device identifier manifest binary from an EEPROM on-board the device. mikroBUS is an add-on board socket standard by MikroElektronika that can be freely used by anyone following the guidelines, more details and discussions on the status of the driver can be found here in this eLinux wiki: https://elinux.org/Mikrobus In the current state of the driver, more than 80 different add-on boards have been tested on the BeagleBoard.org PocketBeagle and the manifest binary is generated using the same manifesto tool used to generate Greybus manifest binaries, The pull request to manifesto to add new descriptors specific to mikrobus is here : https://github.com/projectara/manifesto/pull/2 The utilization of Greybus manifest binaries here is not entirely coincidental, We are evaluating ways to add mikroBUS sockets and devices via Greybus expansion. The mikroBUS standard includes SPI, I2C, UART, PWM, ADC, GPIO and power (3.3V and 5V) connections to interface common embedded peripherals, There are more than 750 add-on boards ranging from wireless connectivity boards to human-machine interface sensors which conform to the mikroBUS standard, out of which more than 140 boards already have support in the Linux kernel.Today, there is no mainlinesolution for enabling mikroBUS add-on boards at run-time, the most straight forward method for loading drivers is to provide device-tree overlay fragments at boot time, this method suffers from the need to maintain a large out-of-tree database for which there is need to maintain an overlay for every mikroBUS add-on board for every Linux system and for every mikroBUS socket on that system. The mikroBUS driver tries to solve the problem by using extended version of the greybus manifest to describe the add-on board device specific information required by the device driver and uses it along with the fixed port specific information to probe the specific device driver.The manifest binary is now fetched from an I2C EEPROM over the I2C bus on the mikroBUS port(subject to change in mikroBUS v3 specification) and enumerate drivers for the add-on devices.There is also ongoing work to define a mikroBUS v3 standard in which the addon board includes a non-volatile storage to store the device identifier manifest binary, once the mikroBUS v3 standard is released, the mikroBUS can be seen as a probeable bus such that the kernel can discover the device on the bus at boot time. The driver also has a few debug SysFS interfaces for testing on add-on boards without an EEPROM, these can be used in the following manner: (example for mikroBUS port 1 on BeagleBoard.org PocketBeagle): printf "%b" '\x01\x00\x00\x59\x32\x17' > /sys/bus/mikrobus/add_port The bytes in the byte array sequence are (in order): * i2c_adap_nr * spi_master_nr * serdev_ctlr_nr * rst_gpio_nr * pwm_gpio_nr * int_gpio_nr * add_port sysFS entry is purely for debug and in the actual state of the driver, port configuration will be loaded from a suitable device tree overlay fragment. echo 0 > /sys/bus/mikrobus/del_port (to delete the attached port) echo 1 > /sys/class/mikrobus-port/mikrobus-0/rescan (to rescan the EEPROM contents on the I2C bus on the mikroBUS port). cat board_manifest.mnfb > /sys/class/mikrobus-port/mikrobus-0/new_device * debug interface to pass the manifest binary in case an EEPROM is absent echo 0 > /sys/class/mikrobus-port/mikrobus-0/delete_device * to unload the loaded board on the mikrobus port These sysFS interfaces are only implemented for debug purposes and in the actual implementation of the driver these will be removed and the manifest binary will be fetched from the non volatile storage on-board the device. The mikroBUS driver enable the mikroBUS to be a probeable bus such that the kernel can discover the device and automatically load the drivers. There are already several Linux platforms with mikroBUS sockets and the mikroBUS driver helps to reduce the time to develop and debug support for various mikroBUS add-on boards. Further, it opens up the possibility for support under dynamically instantiated buses such as with Greybus. Please let know the feedback you have on this patch or the approach used. Thanks, Vaishnav M A Signed-off-by: Vaishnav M A <vaishnav(a)beagleboard.org> --- MAINTAINERS | 6 + drivers/misc/Kconfig | 1 + drivers/misc/Makefile | 1 + drivers/misc/mikrobus/Kconfig | 16 + drivers/misc/mikrobus/Makefile | 5 + drivers/misc/mikrobus/mikrobus_core.c | 649 ++++++++++++++++++++++ drivers/misc/mikrobus/mikrobus_core.h | 130 +++++ drivers/misc/mikrobus/mikrobus_manifest.c | 390 +++++++++++++ drivers/misc/mikrobus/mikrobus_manifest.h | 21 + include/linux/greybus/greybus_manifest.h | 53 ++ 10 files changed, 1272 insertions(+) create mode 100644 drivers/misc/mikrobus/Kconfig create mode 100644 drivers/misc/mikrobus/Makefile create mode 100644 drivers/misc/mikrobus/mikrobus_core.c create mode 100644 drivers/misc/mikrobus/mikrobus_core.h create mode 100644 drivers/misc/mikrobus/mikrobus_manifest.c create mode 100644 drivers/misc/mikrobus/mikrobus_manifest.h diff --git a/MAINTAINERS b/MAINTAINERS index d53db30d1365..9a049746203f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11402,6 +11402,12 @@ M: Oliver Neukum <oliver(a)neukum.org> S: Maintained F: drivers/usb/image/microtek.* +MIKROBUS ADDON BOARD DRIVER +M: Vaishnav M A <vaishnav(a)beagleboard.org> +S: Maintained +W: https://elinux.org/Mikrobus +F: drivers/misc/mikrobus/ + MIPS M: Thomas Bogendoerfer <tsbogend(a)alpha.franken.de> L: linux-mips(a)vger.kernel.org diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index e1b1ba5e2b92..334f0c39d56b 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -472,4 +472,5 @@ source "drivers/misc/ocxl/Kconfig" source "drivers/misc/cardreader/Kconfig" source "drivers/misc/habanalabs/Kconfig" source "drivers/misc/uacce/Kconfig" +source "drivers/misc/mikrobus/Kconfig" endmenu diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index c7bd01ac6291..45486dd77da5 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_VMWARE_BALLOON) += vmw_balloon.o obj-$(CONFIG_PCH_PHUB) += pch_phub.o obj-y += ti-st/ obj-y += lis3lv02d/ +obj-y += mikrobus/ obj-$(CONFIG_ALTERA_STAPL) +=altera-stapl/ obj-$(CONFIG_INTEL_MEI) += mei/ obj-$(CONFIG_VMWARE_VMCI) += vmw_vmci/ diff --git a/drivers/misc/mikrobus/Kconfig b/drivers/misc/mikrobus/Kconfig new file mode 100644 index 000000000000..c3b93e12daad --- /dev/null +++ b/drivers/misc/mikrobus/Kconfig @@ -0,0 +1,16 @@ +menuconfig MIKROBUS + tristate "Module for instantiating devices on mikroBUS ports" + help + This option enables the mikroBUS driver. mikroBUS is an add-on + board socket standard that offers maximum expandability with + the smallest number of pins. The mikroBUS driver helps in + instantiating devices on the mikroBUS port with identifier + data fetched from an EEPROM on the device, more details on + the mikroBUS driver support and discussion can be found in + this eLinux wiki : elinux.org/Mikrobus + + + Say Y here to enable support for this driver. + + To compile this code as a module, chose M here: the module + will be called mikrobus.ko diff --git a/drivers/misc/mikrobus/Makefile b/drivers/misc/mikrobus/Makefile new file mode 100644 index 000000000000..1f80ed4064d8 --- /dev/null +++ b/drivers/misc/mikrobus/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 +# mikroBUS Core + +mikrobus-y := mikrobus_core.o mikrobus_manifest.o +obj-$(CONFIG_MIKROBUS) += mikrobus.o \ No newline at end of file diff --git a/drivers/misc/mikrobus/mikrobus_core.c b/drivers/misc/mikrobus/mikrobus_core.c new file mode 100644 index 000000000000..78c96c637632 --- /dev/null +++ b/drivers/misc/mikrobus/mikrobus_core.c @@ -0,0 +1,649 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * mikroBUS driver for instantiating add-on + * board devices with an identifier EEPROM + * + * Copyright 2020 Vaishnav M A, BeagleBoard.org Foundation. + */ + +#define pr_fmt(fmt) "mikrobus: " fmt + +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/idr.h> +#include <linux/init.h> +#include <linux/jump_label.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/gpio/consumer.h> +#include <linux/mutex.h> +#include <linux/device.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/gpio/machine.h> +#include <linux/nvmem-consumer.h> +#include <linux/nvmem-provider.h> +#include <linux/interrupt.h> +#include <linux/spi/spi.h> +#include <linux/serdev.h> +#include <linux/property.h> +#include <linux/slab.h> + +#include "mikrobus_core.h" +#include "mikrobus_manifest.h" + +#define ATMEL_24C32_I2C_ADDR 0x57 + +static DEFINE_IDR(mikrobus_port_idr); +static struct class_compat *mikrobus_port_compat_class; +static bool is_registered; + +static ssize_t add_port_store(struct bus_type *bt, const char *buf, + size_t count) +{ + struct mikrobus_port_config *cfg; + + if (count < sizeof(*cfg)) { + pr_err("add_port: incorrect config data received: %s\n", buf); + return -EINVAL; + } + mikrobus_register_port_config((void *)buf); + return count; +} +BUS_ATTR_WO(add_port); + +static ssize_t del_port_store(struct bus_type *bt, const char *buf, + size_t count) +{ + int id; + char end; + int res; + + res = sscanf(buf, "%d%c", &id, &end); + if (res < 1) { + pr_err("delete_port: cannot parse mikrobus port ID\n"); + return -EINVAL; + } + if (!idr_find(&mikrobus_port_idr, id)) { + pr_err("attempting to delete unregistered port [%d]\n", id); + return -EINVAL; + } + mikrobus_del_port(idr_find(&mikrobus_port_idr, id)); + return count; +} +BUS_ATTR_WO(del_port); + +static struct attribute *mikrobus_attrs[] = { + &bus_attr_add_port.attr, + &bus_attr_del_port.attr, + NULL +}; +ATTRIBUTE_GROUPS(mikrobus); + +struct bus_type mikrobus_bus_type = { + .name = "mikrobus", + .bus_groups = mikrobus_groups, +}; +EXPORT_SYMBOL_GPL(mikrobus_bus_type); + +static int mikrobus_port_scan_eeprom(struct mikrobus_port *port) +{ + char header[12]; + struct addon_board_info *board; + int manifest_size; + int retval; + char *buf; + + nvmem_device_read(port->eeprom, 0, 12, header); + manifest_size = mikrobus_manifest_header_validate(header, 12); + if (manifest_size > 0) { + buf = kzalloc(manifest_size, GFP_KERNEL); + nvmem_device_read(port->eeprom, 0, manifest_size, buf); + board = kzalloc(sizeof(*board), GFP_KERNEL); + if (!board) + return -ENOMEM; + INIT_LIST_HEAD(&board->manifest_descs); + INIT_LIST_HEAD(&board->devices); + retval = mikrobus_manifest_parse(board, (void *)buf, manifest_size); + if (!retval) { + pr_err("failed to parse manifest, size: %d", manifest_size); + return -EINVAL; + } + retval = mikrobus_register_board(port, board); + if (retval) { + pr_err("failed to register board: %s", board->name); + return -EINVAL; + } + kfree(buf); + } else { + pr_err("inavlide manifest port %d", port->id); + return -EINVAL; + } + return 0; +} + +static ssize_t name_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "%s\n", to_mikrobus_port(dev)->name); +} +static DEVICE_ATTR_RO(name); + +static ssize_t new_device_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct mikrobus_port *port = to_mikrobus_port(dev); + struct addon_board_info *board; + int retval; + + if (port->board == NULL) { + board = kzalloc(sizeof(*board), GFP_KERNEL); + if (!board) + return -EINVAL; + INIT_LIST_HEAD(&board->manifest_descs); + INIT_LIST_HEAD(&board->devices); + } else { + pr_err("port %d already has board registered", port->id); + return -EINVAL; + } + retval = mikrobus_manifest_parse(board, (void *)buf, count); + if (!retval) { + pr_err("failed to parse manifest"); + return -EINVAL; + } + retval = mikrobus_register_board(port, board); + if (retval) { + pr_err("failed to register board: %s", board->name); + return -EINVAL; + } + return count; +} +static DEVICE_ATTR_WO(new_device); + +static ssize_t rescan_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct mikrobus_port *port = to_mikrobus_port(dev); + int id; + char end; + int res; + int retval; + + res = sscanf(buf, "%d%c", &id, &end); + if (res < 1) { + pr_err("rescan: Can't parse trigger\n"); + return -EINVAL; + } + if (port->board != NULL) { + pr_err("port %d already has board registered", port->id); + return -EINVAL; + } + retval = mikrobus_port_scan_eeprom(port); + if (retval) { + pr_err("port %d board register from manifest failed", port->id); + return -EINVAL; + } + return count; +} +static DEVICE_ATTR_WO(rescan); + +static ssize_t delete_device_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int id; + char end; + int res; + struct mikrobus_port *port = to_mikrobus_port(dev); + + res = sscanf(buf, "%d%c", &id, &end); + if (res < 1) { + pr_err("delete_board: Can't parse board ID\n"); + return -EINVAL; + } + if (port->board == NULL) { + pr_err("delete_board: port does not have any boards registered\n"); + return -EINVAL; + } + mikrobus_unregister_board(port, port->board); + return count; +} +static DEVICE_ATTR_IGNORE_LOCKDEP(delete_device, 0200, NULL, delete_device_store); + +static struct attribute *mikrobus_port_attrs[] = { + &dev_attr_new_device.attr, &dev_attr_rescan.attr, + &dev_attr_delete_device.attr, &dev_attr_name.attr, NULL}; +ATTRIBUTE_GROUPS(mikrobus_port); + +static void mikrobus_dev_release(struct device *dev) +{ + struct mikrobus_port *port = to_mikrobus_port(dev); + + idr_remove(&mikrobus_port_idr, port->id); + kfree(port); +} + +struct device_type mikrobus_port_type = { + .groups = mikrobus_port_groups, + .release = mikrobus_dev_release, +}; +EXPORT_SYMBOL_GPL(mikrobus_port_type); + +static int mikrobus_get_irq(struct mikrobus_port *port, int irqno, + int irq_type) +{ + int irq; + + switch (irqno) { + case MIKROBUS_GPIO_INT: + irq = gpiod_to_irq(port->int_gpio); + break; + case MIKROBUS_GPIO_RST: + irq = gpiod_to_irq(port->rst_gpio); + break; + case MIKROBUS_GPIO_PWM: + irq = gpiod_to_irq(port->pwm_gpio); + break; + default: + return -EINVAL; + } + if (irq < 0) { + pr_err("Could not get irq for irq type: %d", irqno); + return -EINVAL; + } + irq_set_irq_type(irq, irq_type); + return irq; +} + +static int mikrobus_setup_gpio(struct gpio_desc *gpio, int gpio_state) +{ + int retval; + + if (gpio_state == MIKROBUS_GPIO_UNUSED) + return 0; + switch (gpio_state) { + case MIKROBUS_GPIO_INPUT: + retval = gpiod_direction_input(gpio); + break; + case MIKROBUS_GPIO_OUTPUT_HIGH: + retval = gpiod_direction_output(gpio, 1); + gpiod_set_value_cansleep(gpio, 1); + break; + case MIKROBUS_GPIO_OUTPUT_LOW: + retval = gpiod_direction_output(gpio, 0); + gpiod_set_value_cansleep(gpio, 0); + break; + default: + return -EINVAL; + } + return retval; +} + +static void mikrobus_spi_device_delete(struct spi_master *master, unsigned int cs) +{ + struct device *dev; + char str[32]; + + snprintf(str, sizeof(str), "%s.%u", dev_name(&master->dev), cs); + dev = bus_find_device_by_name(&spi_bus_type, NULL, str); + if (dev != NULL) { + spi_unregister_device(to_spi_device(dev)); + put_device(dev); + } +} + +static char *mikrobus_get_gpio_chip_name(struct mikrobus_port *port, int gpio) +{ + char *name; + struct gpio_chip *gpiochip; + + switch (gpio) { + case MIKROBUS_GPIO_INT: + gpiochip = gpiod_to_chip(port->int_gpio); + name = kmemdup(gpiochip->label, 40, GFP_KERNEL); + break; + case MIKROBUS_GPIO_RST: + gpiochip = gpiod_to_chip(port->rst_gpio); + name = kmemdup(gpiochip->label, 40, GFP_KERNEL); + break; + case MIKROBUS_GPIO_PWM: + gpiochip = gpiod_to_chip(port->pwm_gpio); + name = kmemdup(gpiochip->label, 40, GFP_KERNEL); + break; + } + return name; +} + +static int mikrobus_get_gpio_hwnum(struct mikrobus_port *port, int gpio) +{ + int hwnum; + struct gpio_chip *gpiochip; + + switch (gpio) { + case MIKROBUS_GPIO_INT: + gpiochip = gpiod_to_chip(port->int_gpio); + hwnum = desc_to_gpio(port->int_gpio) - gpiochip->base; + break; + case MIKROBUS_GPIO_RST: + gpiochip = gpiod_to_chip(port->rst_gpio); + hwnum = desc_to_gpio(port->rst_gpio) - gpiochip->base; + break; + case MIKROBUS_GPIO_PWM: + gpiochip = gpiod_to_chip(port->pwm_gpio); + hwnum = desc_to_gpio(port->pwm_gpio) - gpiochip->base; + break; + } + return hwnum; +} + +static void release_mikrobus_device(struct board_device_info *dev) +{ + list_del(&dev->links); + kfree(dev); +} + +static void release_board_devices(struct addon_board_info *info) +{ + struct board_device_info *dev; + struct board_device_info *next; + + list_for_each_entry_safe(dev, next, &info->devices, links) + release_mikrobus_device(dev); +} + +static int mikrobus_register_device(struct mikrobus_port *port, + struct board_device_info *dev, char *board_name) +{ + struct i2c_board_info *i2c; + struct spi_board_info *spi; + struct gpiod_lookup_table *lookup; + char devname[40]; + int i; + + pr_info(" registering device : %s\n", dev->drv_name); + + if (dev->gpio_lookup != NULL) { + lookup = dev->gpio_lookup; + if (dev->protocol == MIKROBUS_PROTOCOL_SPI) { + snprintf(devname, sizeof(devname), "%s.%u", + dev_name(&port->spi_mstr->dev), dev->reg); + lookup->dev_id = kmemdup(devname, 40, GFP_KERNEL); + } else if (dev->protocol == MIKROBUS_PROTOCOL_I2C) + lookup->dev_id = dev->drv_name; + pr_info(" adding lookup table : %s\n", lookup->dev_id); + for (i = 0; i < dev->num_gpio_resources; i++) { + lookup->table[i].key = + mikrobus_get_gpio_chip_name(port, lookup->table[i].chip_hwnum); + lookup->table[i].chip_hwnum = + mikrobus_get_gpio_hwnum(port, lookup->table[i].chip_hwnum); + lookup->table[i].flags = GPIO_ACTIVE_HIGH; + } + gpiod_add_lookup_table(lookup); + } + switch (dev->protocol) { + case MIKROBUS_PROTOCOL_SPI: + spi = kzalloc(sizeof(*spi), GFP_KERNEL); + if (!spi) + return -ENOMEM; + strncpy(spi->modalias, dev->drv_name, sizeof(spi->modalias) - 1); + if (dev->irq) + spi->irq = mikrobus_get_irq(port, dev->irq, dev->irq_type); + if (dev->properties) + spi->properties = dev->properties; + spi->chip_select = dev->reg; + spi->max_speed_hz = dev->max_speed_hz; + spi->mode = dev->mode; + mikrobus_spi_device_delete(port->spi_mstr, dev->reg); + dev->dev_client = (void *)spi_new_device(port->spi_mstr, spi); + break; + case MIKROBUS_PROTOCOL_I2C: + i2c = kzalloc(sizeof(*i2c), GFP_KERNEL); + if (!i2c) + return -ENOMEM; + strncpy(i2c->type, dev->drv_name, sizeof(i2c->type) - 1); + if (dev->irq) + i2c->irq = mikrobus_get_irq(port, dev->irq, dev->irq_type); + if (dev->properties) + i2c->properties = dev->properties; + i2c->addr = dev->reg; + dev->dev_client = (void *)i2c_new_client_device(port->i2c_adap, i2c); + break; + case MIKROBUS_PROTOCOL_UART: + pr_info("SERDEV devices support not yet added"); + break; + default: + return -EINVAL; + } + return 0; +} + +static void mikrobus_unregister_device(struct mikrobus_port *port, struct board_device_info *dev, + char *board_name) +{ + pr_info(" removing device : %s\n", dev->drv_name); + if (dev->gpio_lookup != NULL) { + gpiod_remove_lookup_table(dev->gpio_lookup); + kfree(dev->gpio_lookup); + } + if (dev->properties != NULL) + kfree(dev->properties); + switch (dev->protocol) { + case MIKROBUS_PROTOCOL_SPI: + spi_unregister_device((struct spi_device *)dev->dev_client); + break; + case MIKROBUS_PROTOCOL_I2C: + i2c_unregister_device((struct i2c_client *)dev->dev_client); + break; + case MIKROBUS_PROTOCOL_UART: + pr_err("SERDEV devices support not yet added"); + break; + } +} + +int mikrobus_register_board(struct mikrobus_port *port, struct addon_board_info *board) +{ + struct board_device_info *devinfo; + struct board_device_info *next; + int retval; + + if (WARN_ON(list_empty(&board->devices))) + return false; + + retval = mikrobus_setup_gpio(port->pwm_gpio, board->pwm_gpio_state); + if (retval) { + pr_err("mikrobus_setup_gpio : can't setup pwm gpio state: (%d)\n", retval); + return retval; + } + retval = mikrobus_setup_gpio(port->int_gpio, board->int_gpio_state); + if (retval) { + pr_err("mikrobus_setup_gpio : can't setup int gpio state: (%d)\n", retval); + return retval; + } + retval = mikrobus_setup_gpio(port->rst_gpio, board->rst_gpio_state); + if (retval) { + pr_err("mikrobus_setup_gpio : can't setup rst gpio state: (%d)\n", retval); + return retval; + } + list_for_each_entry_safe(devinfo, next, &board->devices, links) + mikrobus_register_device(port, devinfo, board->name); + port->board = board; + return 0; +} +EXPORT_SYMBOL_GPL(mikrobus_register_board); + +void mikrobus_unregister_board(struct mikrobus_port *port, struct addon_board_info *board) +{ + struct board_device_info *devinfo; + struct board_device_info *next; + + if (WARN_ON(list_empty(&board->devices))) + return; + port->board = NULL; + list_for_each_entry_safe(devinfo, next, &board->devices, links) + mikrobus_unregister_device(port, devinfo, board->name); + release_board_devices(board); + kfree(board); + port->board = NULL; +} +EXPORT_SYMBOL_GPL(mikrobus_unregister_board); + +int mikrobus_register_port_config(struct mikrobus_port_config *cfg) +{ + struct mikrobus_port *port; + int retval; + + if (WARN_ON(!is_registered)) + return -EAGAIN; + port = kzalloc(sizeof(*port), GFP_KERNEL); + if (!port) + return -ENOMEM; + port->pwm_gpio = gpio_to_desc(cfg->pwm_gpio_nr); + port->int_gpio = gpio_to_desc(cfg->int_gpio_nr); + port->rst_gpio = gpio_to_desc(cfg->rst_gpio_nr); + port->spi_mstr = spi_busnum_to_master(cfg->spi_master_nr); + port->i2c_adap = i2c_get_adapter(cfg->i2c_adap_nr); + retval = mikrobus_register_port(port); + if (retval) { + pr_err("port : can't register port from config (%d)\n", retval); + return retval; + } + return retval; +} +EXPORT_SYMBOL_GPL(mikrobus_register_port_config); + +static struct i2c_board_info mikrobus_eeprom_info = { + I2C_BOARD_INFO("24c32", ATMEL_24C32_I2C_ADDR), +}; + +static int mikrobus_port_probe_eeprom(struct mikrobus_port *port) +{ + struct i2c_client *eeprom_client; + struct nvmem_device *eeprom; + char dev_name[40]; + + eeprom_client = i2c_new_client_device(port->i2c_adap, &mikrobus_eeprom_info); + if (!IS_ERR(eeprom_client)) { + pr_info(" mikrobus port %d default eeprom is probed at %02x\n", port->id, + eeprom_client->addr); + snprintf(dev_name, sizeof(dev_name), "%d-%04x0", port->i2c_adap->nr, + eeprom_client->addr); + eeprom = nvmem_device_get(&eeprom_client->dev, dev_name); + if (IS_ERR(eeprom)) { + pr_err(" mikrobus port %d eeprom nvmem device probe failed\n", port->id); + i2c_unregister_device(eeprom_client); + port->eeprom = NULL; + return 0; + } + } else { + pr_info(" mikrobus port %d default eeprom probe failed\n", port->id); + return 0; + } + port->eeprom = eeprom; + port->eeprom_client = eeprom_client; + return 0; +} + +int mikrobus_register_port(struct mikrobus_port *port) +{ + int retval; + int id; + + if (WARN_ON(!is_registered)) + return -EAGAIN; + id = idr_alloc(&mikrobus_port_idr, port, 0, 0, GFP_KERNEL); + if (id < 0) + return id; + port->id = id; + port->dev.bus = &mikrobus_bus_type; + port->dev.type = &mikrobus_port_type; + strncpy(port->name, "mikrobus-port", sizeof(port->name) - 1); + dev_set_name(&port->dev, "mikrobus-%d", port->id); + pr_info("registering port mikrobus-%d\n ", port->id); + retval = device_register(&port->dev); + if (retval) { + pr_err("port '%d': can't register device (%d)\n", port->id, retval); + put_device(&port->dev); + return retval; + } + retval = class_compat_create_link(mikrobus_port_compat_class, &port->dev, + port->dev.parent); + if (retval) + dev_warn(&port->dev, "failed to create compatibility class link\n"); + if (!port->eeprom) { + pr_info("mikrobus port %d eeprom empty probing default eeprom\n", port->id); + retval = mikrobus_port_probe_eeprom(port); + } + if (port->eeprom) { + retval = mikrobus_port_scan_eeprom(port); + if (retval) + dev_warn(&port->dev, "failed to register board from manifest\n"); + } + return retval; +} +EXPORT_SYMBOL_GPL(mikrobus_register_port); + +void mikrobus_del_port(struct mikrobus_port *port) +{ + struct mikrobus_port *found; + + found = idr_find(&mikrobus_port_idr, port->id); + if (found != port) { + pr_err("attempting to delete unregistered port [%s]\n", port->name); + return; + } + if (port->board != NULL) { + pr_err("attempting to delete port with registered boards, port [%s]\n", + port->name); + return; + } + + if (port->eeprom) { + nvmem_device_put(port->eeprom); + i2c_unregister_device(port->eeprom_client); + } + + class_compat_remove_link(mikrobus_port_compat_class, &port->dev, + port->dev.parent); + device_unregister(&port->dev); + idr_remove(&mikrobus_port_idr, port->id); + memset(&port->dev, 0, sizeof(port->dev)); +} +EXPORT_SYMBOL_GPL(mikrobus_del_port); + +static int __init mikrobus_init(void) +{ + int retval; + + retval = bus_register(&mikrobus_bus_type); + if (retval) { + pr_err("bus_register failed (%d)\n", retval); + return retval; + } + mikrobus_port_compat_class = class_compat_register("mikrobus-port"); + if (!mikrobus_port_compat_class) { + pr_err("class_compat register failed (%d)\n", retval); + retval = -ENOMEM; + goto class_err; + } + is_registered = true; + return 0; +class_err: + bus_unregister(&mikrobus_bus_type); + idr_destroy(&mikrobus_port_idr); + is_registered = false; + return retval; +} +subsys_initcall(mikrobus_init); + +static void __exit mikrobus_exit(void) +{ + bus_unregister(&mikrobus_bus_type); + class_compat_unregister(mikrobus_port_compat_class); + idr_destroy(&mikrobus_port_idr); +} +module_exit(mikrobus_exit); + +MODULE_AUTHOR("Vaishnav M A <vaishnav(a)beagleboard.org>"); +MODULE_DESCRIPTION("mikroBUS main module"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/mikrobus/mikrobus_core.h b/drivers/misc/mikrobus/mikrobus_core.h new file mode 100644 index 000000000000..9684d315f564 --- /dev/null +++ b/drivers/misc/mikrobus/mikrobus_core.h @@ -0,0 +1,130 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * mikroBUS Driver for instantiating add-on + * board devices with an identifier EEPROM + * + * Copyright 2020 Vaishnav M A, BeagleBoard.org Foundation. + */ + +#ifndef __MIKROBUS_H +#define __MIKROBUS_H + +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/machine.h> +#include <linux/spi/spi.h> +#include <linux/idr.h> +#include <linux/init.h> +#include <linux/jump_label.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/device.h> +#include <linux/of_device.h> +#include <linux/serdev.h> +#include <linux/of.h> +#include <linux/property.h> +#include <linux/slab.h> + +#define MIKROBUS_VERSION_MAJOR 0x00 +#define MIKROBUS_VERSION_MINOR 0x02 + +extern struct bus_type mikrobus_bus_type; +extern struct device_type mikrobus_port_type; + +enum mikrobus_property_type { + MIKROBUS_PROPERTY_TYPE_LINK = 0x00, + MIKROBUS_PROPERTY_TYPE_GPIO = 0x01, + MIKROBUS_PROPERTY_TYPE_U8 = 0x02, + MIKROBUS_PROPERTY_TYPE_U16 = 0x03, + MIKROBUS_PROPERTY_TYPE_U32 = 0x04, + MIKROBUS_PROPERTY_TYPE_U64 = 0x05, +}; + +enum mikrobus_gpio_pin { + MIKROBUS_GPIO_INVALID = 0x00, + MIKROBUS_GPIO_INT = 0x01, + MIKROBUS_GPIO_RST = 0x02, + MIKROBUS_GPIO_PWM = 0x03, +}; + +enum mikrobus_protocol { + MIKROBUS_PROTOCOL_SPI = 0x01, + MIKROBUS_PROTOCOL_I2C = 0x02, + MIKROBUS_PROTOCOL_UART = 0x03, + MIKROBUS_PROTOCOL_SPI_GPIOCS = 0x04, + MIKROBUS_PROTOCOL_I2C_MUX = 0x05 +}; + +enum mikrobus_gpio_state { + MIKROBUS_GPIO_UNUSED = 0x00, + MIKROBUS_GPIO_INPUT = 0x01, + MIKROBUS_GPIO_OUTPUT_HIGH = 0x02, + MIKROBUS_GPIO_OUTPUT_LOW = 0x03, +}; + +struct mikrobus_port_config { + __u8 i2c_adap_nr; + __u8 spi_master_nr; + __u8 serdev_ctlr_nr; + __u8 rst_gpio_nr; + __u8 pwm_gpio_nr; + __u8 int_gpio_nr; +} __packed; + +struct board_device_info { + struct list_head links; + int id; + char *drv_name; + unsigned short protocol; + unsigned short reg; + u32 max_speed_hz; + unsigned int mode; + int irq; + int irq_type; + int cs_gpio; + unsigned short num_gpio_resources; + unsigned short num_properties; + struct property_entry *properties; + struct gpiod_lookup_table *gpio_lookup; + void *dev_client; +}; + +struct addon_board_info { + char *name; + unsigned short num_devices; + unsigned short rst_gpio_state; + unsigned short pwm_gpio_state; + unsigned short int_gpio_state; + struct list_head manifest_descs; + struct list_head devices; +}; + +struct mikrobus_port { + char name[48]; + struct module *owner; + struct device dev; + int id; + struct gpio_desc *pwm_gpio; + struct gpio_desc *int_gpio; + struct gpio_desc *rst_gpio; + struct spi_master *spi_mstr; + struct i2c_adapter *i2c_adap; + struct addon_board_info *board; + struct i2c_client *eeprom_client; + struct nvmem_device *eeprom; +}; +#define to_mikrobus_port(d) container_of(d, struct mikrobus_port, dev) + +int mikrobus_register_board(struct mikrobus_port *port, + struct addon_board_info *board); +void mikrobus_unregister_board(struct mikrobus_port *port, + struct addon_board_info *board); +int mikrobus_register_port_config(struct mikrobus_port_config *cfg); +int mikrobus_register_port(struct mikrobus_port *port); +void mikrobus_del_port(struct mikrobus_port *port); + +#endif /* __MIKROBUS_H */ diff --git a/drivers/misc/mikrobus/mikrobus_manifest.c b/drivers/misc/mikrobus/mikrobus_manifest.c new file mode 100644 index 000000000000..60ebca560f0d --- /dev/null +++ b/drivers/misc/mikrobus/mikrobus_manifest.c @@ -0,0 +1,390 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * mikroBUS manifest parsing, an + * extension to Greybus Manifest Parsing + * under drivers/greybus/manifest.c + * + * Copyright 2014-2015 Google Inc. + * Copyright 2014-2015 Linaro Ltd. + */ + +#define pr_fmt(fmt) "mikrobus_manifest: " fmt + +#include <linux/bits.h> +#include <linux/types.h> +#include <linux/property.h> +#include <linux/greybus/greybus_manifest.h> + +#include "mikrobus_manifest.h" + +struct manifest_desc { + struct list_head links; + size_t size; + void *data; + enum greybus_descriptor_type type; +}; + +static void release_manifest_descriptor(struct manifest_desc *descriptor) +{ + list_del(&descriptor->links); + kfree(descriptor); +} + +static void release_manifest_descriptors(struct addon_board_info *info) +{ + struct manifest_desc *descriptor; + struct manifest_desc *next; + + list_for_each_entry_safe(descriptor, next, &info->manifest_descs, links) + release_manifest_descriptor(descriptor); +} + +static int identify_descriptor(struct addon_board_info *info, struct greybus_descriptor *desc, + size_t size) +{ + struct greybus_descriptor_header *desc_header = &desc->header; + struct manifest_desc *descriptor; + size_t desc_size; + size_t expected_size; + + if (size < sizeof(*desc_header)) + return -EINVAL; + desc_size = le16_to_cpu(desc_header->size); + if (desc_size > size) + return -EINVAL; + expected_size = sizeof(*desc_header); + switch (desc_header->type) { + case GREYBUS_TYPE_STRING: + expected_size += sizeof(struct greybus_descriptor_string); + expected_size += desc->string.length; + expected_size = ALIGN(expected_size, 4); + break; + case GREYBUS_TYPE_PROPERTY: + expected_size += sizeof(struct greybus_descriptor_property); + expected_size += desc->property.length; + expected_size = ALIGN(expected_size, 4); + break; + case GREYBUS_TYPE_DEVICE: + expected_size += sizeof(struct greybus_descriptor_device); + break; + case GREYBUS_TYPE_MIKROBUS: + expected_size += sizeof(struct greybus_descriptor_mikrobus); + break; + case GREYBUS_TYPE_INTERFACE: + expected_size += sizeof(struct greybus_descriptor_interface); + break; + case GREYBUS_TYPE_CPORT: + expected_size += sizeof(struct greybus_descriptor_cport); + break; + case GREYBUS_TYPE_BUNDLE: + expected_size += sizeof(struct greybus_descriptor_bundle); + break; + case GREYBUS_TYPE_INVALID: + default: + return -EINVAL; + } + + descriptor = kzalloc(sizeof(*descriptor), GFP_KERNEL); + if (!descriptor) + return -ENOMEM; + descriptor->size = desc_size; + descriptor->data = (char *)desc + sizeof(*desc_header); + descriptor->type = desc_header->type; + list_add_tail(&descriptor->links, &info->manifest_descs); + return desc_size; +} + +static char *mikrobus_string_get(struct addon_board_info *info, u8 string_id) +{ + struct greybus_descriptor_string *desc_string; + struct manifest_desc *descriptor; + bool found = false; + char *string; + + if (!string_id) + return NULL; + + list_for_each_entry(descriptor, &info->manifest_descs, links) { + if (descriptor->type != GREYBUS_TYPE_STRING) + continue; + desc_string = descriptor->data; + if (desc_string->id == string_id) { + found = true; + break; + } + } + if (!found) + return ERR_PTR(-ENOENT); + string = kmemdup(&desc_string->string, desc_string->length + 1, GFP_KERNEL); + if (!string) + return ERR_PTR(-ENOMEM); + string[desc_string->length] = '\0'; + return string; +} + +static void mikrobus_state_get(struct addon_board_info *info) +{ + struct greybus_descriptor_mikrobus *mikrobus; + struct greybus_descriptor_interface *interface; + struct manifest_desc *descriptor; + bool found = false; + + list_for_each_entry(descriptor, &info->manifest_descs, links) { + if (descriptor->type == GREYBUS_TYPE_MIKROBUS) { + mikrobus = descriptor->data; + found = true; + break; + } + } + + if (found) { + info->num_devices = mikrobus->num_devices; + info->rst_gpio_state = mikrobus->rst_gpio_state; + info->pwm_gpio_state = mikrobus->pwm_gpio_state; + info->int_gpio_state = mikrobus->int_gpio_state; + } else { + info->num_devices = 1; + info->rst_gpio_state = MIKROBUS_GPIO_UNUSED; + info->pwm_gpio_state = MIKROBUS_GPIO_UNUSED; + info->int_gpio_state = MIKROBUS_GPIO_UNUSED; + } + + list_for_each_entry(descriptor, &info->manifest_descs, links) { + if (descriptor->type == GREYBUS_TYPE_INTERFACE) { + interface = descriptor->data; + break; + } + } + info->name = mikrobus_string_get(info, interface->product_stringid); +} + +static struct property_entry * +mikrobus_property_entry_get(struct addon_board_info *info, u8 *prop_link, + int num_properties) +{ + struct greybus_descriptor_property *desc_property; + struct manifest_desc *descriptor; + struct property_entry *properties; + int i; + char *prop_name; + bool found = false; + u8 *val_u8; + u16 *val_u16; + u32 *val_u32; + u64 *val_u64; + + properties = kcalloc(num_properties, sizeof(*properties), GFP_KERNEL); + if (!properties) + return ERR_PTR(-ENOMEM); + for (i = 0; i < num_properties; i++) { + list_for_each_entry(descriptor, &info->manifest_descs, links) { + if (descriptor->type != GREYBUS_TYPE_PROPERTY) + continue; + desc_property = descriptor->data; + if (desc_property->id == prop_link[i]) { + found = true; + break; + } + } + if (!found) + return ERR_PTR(-ENOENT); + prop_name = mikrobus_string_get(info, desc_property->propname_stringid); + switch (desc_property->type) { + case MIKROBUS_PROPERTY_TYPE_U8: + val_u8 = kmemdup(&desc_property->value, + (desc_property->length) * sizeof(u8), GFP_KERNEL); + if (desc_property->length == 1) + properties[i] = PROPERTY_ENTRY_U8(prop_name, *val_u8); + else + properties[i] = PROPERTY_ENTRY_U8_ARRAY_LEN( + prop_name, (void *)desc_property->value, desc_property->length); + break; + case MIKROBUS_PROPERTY_TYPE_U16: + val_u16 = kmemdup(&desc_property->value, + (desc_property->length) * sizeof(u16), GFP_KERNEL); + if (desc_property->length == 1) + properties[i] = PROPERTY_ENTRY_U16(prop_name, *val_u16); + else + properties[i] = PROPERTY_ENTRY_U16_ARRAY_LEN( + prop_name, (void *)desc_property->value, desc_property->length); + break; + case MIKROBUS_PROPERTY_TYPE_U32: + val_u32 = kmemdup(&desc_property->value, + (desc_property->length) * sizeof(u32), GFP_KERNEL); + if (desc_property->length == 1) + properties[i] = PROPERTY_ENTRY_U32(prop_name, *val_u32); + else + properties[i] = PROPERTY_ENTRY_U32_ARRAY_LEN( + prop_name, (void *)desc_property->value, desc_property->length); + break; + case MIKROBUS_PROPERTY_TYPE_U64: + val_u64 = kmemdup(&desc_property->value, + (desc_property->length) * sizeof(u64), GFP_KERNEL); + if (desc_property->length == 1) + properties[i] = PROPERTY_ENTRY_U64(prop_name, *val_u64); + else + properties[i] = PROPERTY_ENTRY_U64_ARRAY_LEN( + prop_name, (void *)desc_property->value, desc_property->length); + break; + default: + return ERR_PTR(-EINVAL); + } + } + return properties; +} + +static u8 *mikrobus_property_link_get(struct addon_board_info *info, u8 prop_id, + u8 prop_type) +{ + struct greybus_descriptor_property *desc_property; + struct manifest_desc *descriptor; + bool found = false; + u8 *val_u8; + + if (!prop_id) + return NULL; + list_for_each_entry(descriptor, &info->manifest_descs, links) { + if (descriptor->type != GREYBUS_TYPE_PROPERTY) + continue; + desc_property = descriptor->data; + if (desc_property->id == prop_id && desc_property->type == prop_type) { + found = true; + break; + } + } + if (!found) + return ERR_PTR(-ENOENT); + val_u8 = kmemdup(&desc_property->value, desc_property->length, GFP_KERNEL); + return val_u8; +} + +static int mikrobus_manifest_attach_device(struct addon_board_info *info, + struct greybus_descriptor_device *dev_desc) +{ + struct board_device_info *dev; + struct gpiod_lookup_table *lookup; + struct greybus_descriptor_property *desc_property; + struct manifest_desc *descriptor; + int i; + u8 *prop_link; + u8 *gpio_desc_link; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + dev->id = dev_desc->id; + dev->drv_name = mikrobus_string_get(info, dev_desc->driver_stringid); + dev->protocol = dev_desc->protocol; + dev->reg = dev_desc->reg; + dev->irq = dev_desc->irq; + dev->irq_type = dev_desc->irq_type; + dev->max_speed_hz = le32_to_cpu(dev_desc->max_speed_hz); + dev->mode = dev_desc->mode; + dev->cs_gpio = dev_desc->cs_gpio; + dev->num_gpio_resources = dev_desc->num_gpio_resources; + dev->num_properties = dev_desc->num_properties; + pr_info("device %d , number of properties=%d , number of gpio resources=%d\n", + dev->id, dev->num_properties, dev->num_gpio_resources); + if (dev->num_properties > 0) { + prop_link = mikrobus_property_link_get(info, dev_desc->prop_link, + MIKROBUS_PROPERTY_TYPE_LINK); + dev->properties = mikrobus_property_entry_get(info, prop_link, dev->num_properties); + } + if (dev->num_gpio_resources > 0) { + lookup = kzalloc(struct_size(lookup, table, dev->num_gpio_resources), + GFP_KERNEL); + if (!lookup) + return -ENOMEM; + gpio_desc_link = mikrobus_property_link_get(info, dev_desc->gpio_link, + MIKROBUS_PROPERTY_TYPE_GPIO); + for (i = 0; i < dev->num_gpio_resources; i++) { + list_for_each_entry(descriptor, &info->manifest_descs, links) { + if (descriptor->type != GREYBUS_TYPE_PROPERTY) + continue; + desc_property = descriptor->data; + if (desc_property->id == gpio_desc_link[i]) { + lookup->table[i].chip_hwnum = *desc_property->value; + lookup->table[i].con_id = + mikrobus_string_get(info, desc_property->propname_stringid); + break; + } + } + } + dev->gpio_lookup = lookup; + } + list_add_tail(&dev->links, &info->devices); + return 0; +} + +static int mikrobus_manifest_parse_devices(struct addon_board_info *info) +{ + struct greybus_descriptor_device *desc_device; + struct manifest_desc *desc, *next; + int devcount = 0; + + if (WARN_ON(!list_empty(&info->devices))) + return false; + list_for_each_entry_safe(desc, next, &info->manifest_descs, links) { + if (desc->type != GREYBUS_TYPE_DEVICE) + continue; + desc_device = desc->data; + mikrobus_manifest_attach_device(info, desc_device); + devcount++; + } + return devcount; +} + +bool mikrobus_manifest_parse(struct addon_board_info *info, void *data, + size_t size) +{ + struct greybus_manifest *manifest; + struct greybus_manifest_header *header; + struct greybus_descriptor *desc; + u16 manifest_size; + int dev_count; + int desc_size; + + if (WARN_ON(!list_empty(&info->manifest_descs))) + return false; + if (size < sizeof(*header)) + return false; + manifest = data; + header = &manifest->header; + manifest_size = le16_to_cpu(header->size); + if (manifest_size != size) + return false; + if (header->version_major > MIKROBUS_VERSION_MAJOR) + return false; + desc = manifest->descriptors; + size -= sizeof(*header); + while (size) { + desc_size = identify_descriptor(info, desc, size); + if (desc_size < 0) { + pr_err("invalid manifest descriptor"); + return -EINVAL; + } + desc = (struct greybus_descriptor *)((char *)desc + desc_size); + size -= desc_size; + } + mikrobus_state_get(info); + dev_count = mikrobus_manifest_parse_devices(info); + pr_info(" %s manifest parsed with %d device(s)\n", info->name, + info->num_devices); + release_manifest_descriptors(info); + return true; +} + +size_t mikrobus_manifest_header_validate(void *data, size_t size) +{ + struct greybus_manifest_header *header; + u16 manifest_size; + + if (size < sizeof(*header)) + return 0; + + header = data; + manifest_size = le16_to_cpu(header->size); + if (header->version_major > MIKROBUS_VERSION_MAJOR) + return 0; + return manifest_size; +} diff --git a/drivers/misc/mikrobus/mikrobus_manifest.h b/drivers/misc/mikrobus/mikrobus_manifest.h new file mode 100644 index 000000000000..a195d1c26493 --- /dev/null +++ b/drivers/misc/mikrobus/mikrobus_manifest.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * mikroBUS manifest definition + * extension to Greybus Manifest Definition + * + * Copyright 2014-2015 Google Inc. + * Copyright 2014-2015 Linaro Ltd. + * + * Released under the GPLv2 and BSD licenses. + */ + +#ifndef __MIKROBUS_MANIFEST_H +#define __MIKROBUS_MANIFEST_H + +#include "mikrobus_core.h" + +bool mikrobus_manifest_parse(struct addon_board_info *info, void *data, + size_t size); +size_t mikrobus_manifest_header_validate(void *data, size_t size); + +#endif /* __MIKROBUS_MANIFEST_H */ diff --git a/include/linux/greybus/greybus_manifest.h b/include/linux/greybus/greybus_manifest.h index 6e62fe478712..79c8cab9ef96 100644 --- a/include/linux/greybus/greybus_manifest.h +++ b/include/linux/greybus/greybus_manifest.h @@ -23,6 +23,9 @@ enum greybus_descriptor_type { GREYBUS_TYPE_STRING = 0x02, GREYBUS_TYPE_BUNDLE = 0x03, GREYBUS_TYPE_CPORT = 0x04, + GREYBUS_TYPE_MIKROBUS = 0x05, + GREYBUS_TYPE_PROPERTY = 0x06, + GREYBUS_TYPE_DEVICE = 0x07, }; enum greybus_protocol { @@ -151,6 +154,53 @@ struct greybus_descriptor_cport { __u8 protocol_id; /* enum greybus_protocol */ } __packed; +/* + * A mikrobus descriptor is used to describe the details + * about the add-on board connected to the mikrobus port. + * It describes the number of indivdual devices on the + * add-on board and the default states of the GPIOs + */ +struct greybus_descriptor_mikrobus { + __u8 num_devices; + __u8 rst_gpio_state; + __u8 pwm_gpio_state; + __u8 int_gpio_state; +} __packed; + +/* + * A property descriptor is used to pass named properties + * to device drivers through the unified device properties + * interface under linux/property.h + */ +struct greybus_descriptor_property { + __u8 length; + __u8 id; + __u8 propname_stringid; + __u8 type; + __u8 value[0]; +} __packed; + +/* + * A device descriptor is used to describe the + * details required by a add-on board device + * driver. + */ +struct greybus_descriptor_device { + __u8 id; + __u8 driver_stringid; + __u8 num_properties; + __u8 protocol; + __le32 max_speed_hz; + __u8 reg; + __u8 mode; + __u8 num_gpio_resources; + __u8 cs_gpio; + __u8 irq; + __u8 irq_type; + __u8 prop_link; + __u8 gpio_link; +} __packed; + struct greybus_descriptor_header { __le16 size; __u8 type; /* enum greybus_descriptor_type */ @@ -164,6 +214,9 @@ struct greybus_descriptor { struct greybus_descriptor_interface interface; struct greybus_descriptor_bundle bundle; struct greybus_descriptor_cport cport; + struct greybus_descriptor_mikrobus mikrobus; + struct greybus_descriptor_property property; + struct greybus_descriptor_device device; }; } __packed; -- 2.25.1

5 years

[PATCH] svc: add missed destroy_workqueue when gb_svc_create fails

by Li Heng

destroy_workqueue() should be called to destroy svc->wq when gb_svc_create() init resources fails. Fixes: 8465def499c7 ("staging: greybus: move the greybus core to drivers/greybus") Reported-by: Hulk Robot <hulkci(a)huawei.com> Signed-off-by: Li Heng <liheng40(a)huawei.com> --- drivers/greybus/svc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/greybus/svc.c b/drivers/greybus/svc.c index ce7740e..38f858f 100644 --- a/drivers/greybus/svc.c +++ b/drivers/greybus/svc.c @@ -1340,6 +1340,7 @@ struct gb_svc *gb_svc_create(struct gb_host_device *hd) err_put_device: put_device(&svc->dev); + destroy_workqueue(svc->wq); return NULL; } -- 2.7.4

5 years

PR for examples manifests

by Christopher Friedt

Hi list, I made a PR to GitHub before realizing that it's probably preferred to send a patch to the ML. https://github.com/projectara/manifesto/pull/1 Patch is attached as well. Is anyone able to merge the PR or patch? Thanks, C

5 years

← Newer
1
...
32
33
34
35
36
37
38
...
59
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

greybus-dev