greybus-dev

greybus-dev@lists.linaro.org

9 participants
573 discussions

[PATCH 2/2] staging: greybus: Fixed a misspelling in hid.c

by Pritthijit Nath

Fixed the spelling of 'transfered' to 'transferred'. Signed-off-by: Pritthijit Nath <pritthijit.nath(a)icloud.com> --- Fixed the typo in 'transferred' which crept in last time. drivers/staging/greybus/hid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/greybus/hid.c b/drivers/staging/greybus/hid.c index a56c3fb5d35a..adb91286803a 100644 --- a/drivers/staging/greybus/hid.c +++ b/drivers/staging/greybus/hid.c @@ -254,7 +254,7 @@ static int __gb_hid_output_raw_report(struct hid_device *hid, __u8 *buf, ret = gb_hid_set_report(ghid, report_type, report_id, buf, len); if (report_id && ret >= 0) - ret++; /* add report_id to the number of transfered bytes */ + ret++; /* add report_id to the number of transferred bytes */ return 0; } -- 2.25.1

4 years, 4 months

[PATCH 1/2] staging: greybus: Fixed alignment issue in hid.c

by Pritthijit Nath

This change fixes a checkpatch CHECK style issue for "Alignment should match open parenthesis". Signed-off-by: Pritthijit Nath <pritthijit.nath(a)icloud.com> --- drivers/staging/greybus/hid.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/greybus/hid.c b/drivers/staging/greybus/hid.c index ed706f39e87a..a56c3fb5d35a 100644 --- a/drivers/staging/greybus/hid.c +++ b/drivers/staging/greybus/hid.c @@ -221,8 +221,8 @@ static void gb_hid_init_reports(struct gb_hid *ghid) } static int __gb_hid_get_raw_report(struct hid_device *hid, - unsigned char report_number, __u8 *buf, size_t count, - unsigned char report_type) + unsigned char report_number, __u8 *buf, size_t count, + unsigned char report_type) { struct gb_hid *ghid = hid->driver_data; int ret; -- 2.25.1

4 years, 4 months

[PATCH 2/2] staging: greybus: Fixed a misspelling in hid.c

by Pritthijit Nath

Fixed the spelling of 'transfered' to 'transferred'. Signed-off-by: Pritthijit Nath <pritthijit.nath(a)icloud.com> --- Fixed the typo in the patch which was meant to fix that very typo. Really sorry for last time. Hope this does not have any other typo. drivers/staging/greybus/hid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/greybus/hid.c b/drivers/staging/greybus/hid.c index a56c3fb5d35a..adb91286803a 100644 --- a/drivers/staging/greybus/hid.c +++ b/drivers/staging/greybus/hid.c @@ -254,7 +254,7 @@ static int __gb_hid_output_raw_report(struct hid_device *hid, __u8 *buf, ret = gb_hid_set_report(ghid, report_type, report_id, buf, len); if (report_id && ret >= 0) - ret++; /* add report_id to the number of transfered bytes */ + ret++; /* add report_id to the number of transferred bytes */ return 0; } -- 2.25.1

4 years, 4 months

[PATCH] staging: greybus: Fixed misspelling and alignment issue in hid.c

by Pritthijit Nath

This change fixes a checkpatch CHECK style issue for "Alignment should match open parenthesis". In addition the misspelling of "transferred" also has been fixed. Signed-off-by: Pritthijit Nath <pritthijit.nath(a)icloud.com> --- drivers/staging/greybus/hid.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/staging/greybus/hid.c b/drivers/staging/greybus/hid.c index ed706f39e87a..adb91286803a 100644 --- a/drivers/staging/greybus/hid.c +++ b/drivers/staging/greybus/hid.c @@ -221,8 +221,8 @@ static void gb_hid_init_reports(struct gb_hid *ghid) } static int __gb_hid_get_raw_report(struct hid_device *hid, - unsigned char report_number, __u8 *buf, size_t count, - unsigned char report_type) + unsigned char report_number, __u8 *buf, size_t count, + unsigned char report_type) { struct gb_hid *ghid = hid->driver_data; int ret; @@ -254,7 +254,7 @@ static int __gb_hid_output_raw_report(struct hid_device *hid, __u8 *buf, ret = gb_hid_set_report(ghid, report_type, report_id, buf, len); if (report_id && ret >= 0) - ret++; /* add report_id to the number of transfered bytes */ + ret++; /* add report_id to the number of transferred bytes */ return 0; } -- 2.25.1

4 years, 4 months

[PATCH 0/1] Coding style fix

by Fatih YILDIRIM

Hi, I have a coding style fix in greybus subsystem. By the way, I'm following the Eudyptula Challenge Linux kernel tasks and this patch is related to my task no 10. I hope I'm doing it the right way. Thanks for your understanding and kind comments. Fatih YILDIRIM (1): Macros with multiple statements should be enclosed in a do - while loop. drivers/staging/greybus/loopback.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) -- 2.20.1

4 years, 4 months

[PATCH 1/2] staging: greybus: vibrator: use proper API for vibrator devices

by Greg Kroah-Hartman

The correct user/kernel api for vibrator devices is the Input rumble api, not a random sysfs file like the greybus vibrator driver currently uses. Add support for the correct input api to the vibrator driver so that it hooks up to the kernel and userspace correctly. Cc: Johan Hovold <johan(a)kernel.org> Cc: Alex Elder <elder(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/staging/greybus/vibrator.c | 59 ++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) diff --git a/drivers/staging/greybus/vibrator.c b/drivers/staging/greybus/vibrator.c index 0e2b188e5ca3..94110cadb5bd 100644 --- a/drivers/staging/greybus/vibrator.c +++ b/drivers/staging/greybus/vibrator.c @@ -13,13 +13,18 @@ #include <linux/kdev_t.h> #include <linux/idr.h> #include <linux/pm_runtime.h> +#include <linux/input.h> #include <linux/greybus.h> struct gb_vibrator_device { struct gb_connection *connection; + struct input_dev *input; struct device *dev; int minor; /* vibrator minor number */ struct delayed_work delayed_work; + bool running; + bool on; + struct work_struct play_work; }; /* Greybus Vibrator operation types */ @@ -36,6 +41,7 @@ static int turn_off(struct gb_vibrator_device *vib) gb_pm_runtime_put_autosuspend(bundle); + vib->on = false; return ret; } @@ -59,11 +65,48 @@ static int turn_on(struct gb_vibrator_device *vib, u16 timeout_ms) return ret; } + vib->on = true; schedule_delayed_work(&vib->delayed_work, msecs_to_jiffies(timeout_ms)); return 0; } +static void gb_vibrator_play_work(struct work_struct *work) +{ + struct gb_vibrator_device *vib = + container_of(work, struct gb_vibrator_device, play_work); + + if (vib->running) + turn_off(vib); + else + turn_on(vib, 100); +} + +static int gb_vibrator_play_effect(struct input_dev *input, void *data, + struct ff_effect *effect) +{ + struct gb_vibrator_device *vib = input_get_drvdata(input); + int level; + + level = effect->u.rumble.strong_magnitude; + if (!level) + level = effect->u.rumble.weak_magnitude; + + vib->running = level; + schedule_work(&vib->play_work); + return 0; +} + +static void gb_vibrator_close(struct input_dev *input) +{ + struct gb_vibrator_device *vib = input_get_drvdata(input); + + cancel_delayed_work_sync(&vib->delayed_work); + cancel_work_sync(&vib->play_work); + turn_off(vib); + vib->running = false; +} + static void gb_vibrator_worker(struct work_struct *work) { struct delayed_work *delayed_work = to_delayed_work(work); @@ -169,10 +212,26 @@ static int gb_vibrator_probe(struct gb_bundle *bundle, INIT_DELAYED_WORK(&vib->delayed_work, gb_vibrator_worker); + INIT_WORK(&vib->play_work, gb_vibrator_play_work); + vib->input->name = "greybus-vibrator"; + vib->input->close = gb_vibrator_close; + vib->input->dev.parent = &bundle->dev; + vib->input->id.bustype = BUS_HOST; + + input_set_drvdata(vib->input, vib); + input_set_capability(vib->input, EV_FF, FF_RUMBLE); + + retval = input_ff_create_memless(vib->input, NULL, + gb_vibrator_play_effect); + if (retval) + goto err_device_remove; + gb_pm_runtime_put_autosuspend(bundle); return 0; +err_device_remove: + device_unregister(vib->dev); err_ida_remove: ida_simple_remove(&minors, vib->minor); err_connection_disable: -- 2.30.0

4 years, 4 months

[PATCH] staging: greybus: audio_helper.c: Replace strlcpy() with strscpy()

by B K Karthik

In gbaudio_remove_controls() , replace the usage of strlcpy() with strscpy() because strlcpy() only limits the *destination* size, and the source is always read fully. https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmk… was quoted by checkpatch while showing this warning. Signed-off-by: B K Karthik <bkkarthik(a)pesu.pes.edu> --- drivers/staging/greybus/audio_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/greybus/audio_helper.c b/drivers/staging/greybus/audio_helper.c index 3011b8abce38..1ed4772d2771 100644 --- a/drivers/staging/greybus/audio_helper.c +++ b/drivers/staging/greybus/audio_helper.c @@ -166,7 +166,7 @@ static int gbaudio_remove_controls(struct snd_card *card, struct device *dev, snprintf(id.name, sizeof(id.name), "%s %s", prefix, control->name); else - strlcpy(id.name, control->name, sizeof(id.name)); + strscpy(id.name, control->name, sizeof(id.name)); id.numid = 0; id.iface = control->iface; id.device = control->device; -- 2.17.1

4 years, 4 months

[PATCH] greybus: es2: drop short control-transfer checks

by Johan Hovold

There's no need to check for short USB control transfers when sending data using so remove the redundant sanity checks. Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/greybus/es2.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/greybus/es2.c b/drivers/greybus/es2.c index 1df6ab5d339d..48ad154df3a7 100644 --- a/drivers/greybus/es2.c +++ b/drivers/greybus/es2.c @@ -567,12 +567,9 @@ static int cport_enable(struct gb_host_device *hd, u16 cport_id, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, cport_id, 0, req, sizeof(*req), ES2_USB_CTRL_TIMEOUT); - if (ret != sizeof(*req)) { + if (ret < 0) { dev_err(&udev->dev, "failed to set cport flags for port %d\n", cport_id); - if (ret >= 0) - ret = -EIO; - goto out; } @@ -961,12 +958,10 @@ static int arpc_send(struct es2_ap_dev *es2, struct arpc *rpc, int timeout) 0, 0, rpc->req, le16_to_cpu(rpc->req->size), ES2_USB_CTRL_TIMEOUT); - if (retval != le16_to_cpu(rpc->req->size)) { + if (retval < 0) { dev_err(&udev->dev, "failed to send ARPC request %d: %d\n", rpc->req->type, retval); - if (retval > 0) - retval = -EIO; return retval; } -- 2.26.2

4 years, 4 months

Authentication and Ecryption

by Christopher Friedt

Hi everyone, I thought it might be a good time to start / re-start / join the conversation about authentication and encryption in Greybus, and in particular, for using a transport (and lower layers) other than UniPro. This is the logical next step after getting the TCP/IP transport working with gbridge over BLE, 802.15.4, WiFi, ethernet, UART, etc. There is the Component Authentication Protocol that exists already, but I'm not terribly familiar with it. Is anyone able to clarify if there is some overlap between CAP and some of the work that follows? If it's possible to re-use some of the CAP, that would be nice. Just over a year ago I set up authentication and encryption over Greybus for BeagleBoard.org. I was able to demonstrate it working over a TCP/IP transport. Here is some code that is on the back-burner for now. https://github.com/friedtco/gbridge/blob/feature/tcpip-ble-ipsp/pkauth.h https://github.com/friedtco/gbridge/blob/feature/tcpip-ble-ipsp/pkauth.c I have a PR open to anobli/gbridge on GitHub that pulls in the non-authentication / encryption changes. So the change that deals with auth and encryption is fairly small. On the Host side, it uses OpenSSL. We are using regular SSH keys for asymmetric authentication and the initial secure channel, then generating and sharing an AES-128 session key for symmetric encryption of the subsequent communications. The wireless SoC we're using for testing is the CC1352R from TI, and it has both AES and PK hardware accelerators. Most SoC's these days have an AES accelerator, at least. The handshake is described here, but I'll copy it into the email as well. https://github.com/friedtco/gbridge/blob/feature/tcpip-ble-ipsp/pkauth.c#L1… 1. Device sends its public key 2. Host compares device public key with those in a collection of trusted public keys. if not found connection closed. 3. Host sends its public key 4. Device compares host public key with those in a collection of trusted public keys. if not found connection closed. 5. Device creates a randomly generated message, "PlainText A". 6. Device encrypts "PlainText A" using Host public key, creating "CipherText A". 7. Device transmits "CipherText A" to Host. 8. Host decrypts "CipherText A" with Host private key, resulting in "PlainText B". 9. Host encrypts "PlainText B" using Device public key, creating "CipherText B". 10. Host transmits "CipherText B" to Device. 11. Device decrypts "CipherText B" with Device private key, resulting in "PlainText C". 12. Device compares "PlainText A" and "PlainText C", and responds with success or noauth. 13. Host creates a randomly generated message, "PlainText D". 14. Host encrypts "PlainText D" using Device public key, creating "CipherText D". 15. Host transmits "CipherText D" to Device. 16. Device decrypts "CipherText D" with Device private key, resulting in "PlainText E". 17. Device encrypts "PlainText E" using Host public key, creating "CipherText E". 18. Device transmits "CipherText E" to Host. 19. Host decrypts "CipherText E" with Host private key, resulting in "PlainText F". 20. Host compares "PlainText D" and "PlainText F", and responds with success or noauth. 21. Host generates symmetric session key as "PlainText G", pairs session key with socket. 22. Host encrypts "PlainText G" with Device public key, resulting in "CipherText G". 23. Host transmits "CipherText G" to device. 24. Device decrypts "CipherText G" using Device private key, resulting in "PlainText H". 25. Device pairs the session key ("PlainText H") with socket. Currently, this handshake happens when a new connection is created on any port / CPort (be it Control, GPIO, I2C, SPI, etc). While I understand that this security mechanism is not nearly as sophisticated as that of Thread, for example, it's fairly easy to implement locally for developers. However, we would ultimately like to support more than one method of authentication and encryption in Greybus. For the very basic method we implemented above, 5 additional message primitives were required: https://github.com/friedtco/gbridge/blob/feature/tcpip-ble-ipsp/pkauth.h#L32 #define GB_PKAUTH_TYPE_VERSION 0x7a #define GB_PKAUTH_TYPE_PUBKEY 0x7b #define GB_PKAUTH_TYPE_CHALLENGE 0x7c #define GB_PKAUTH_TYPE_CHALLENGE_RESP 0x7d #define GB_PKAUTH_TYPE_SESSION_KEY 0x7e For full negotiation of the auth mechanism and encryption algorithm (e.g. OAuth2 authentication + 3DES encryption) we'll probably need a few more message primitives, and likely a new minor version (at least) for each CPort protocol. It should be possible (although discouraged) to opt for everything in plaintext, but that would also be the default case for the CPort protocols as they exist today. I would love to hear some ideas about this from whoever is interested. Cheers, C

4 years, 5 months

[PATCH] staging: greybus: fix stack size warning with UBSAN

by Arnd Bergmann

From: Arnd Bergmann <arnd(a)arndb.de> clang warns about excessive stack usage in this driver when UBSAN is enabled: drivers/staging/greybus/audio_topology.c:977:12: error: stack frame size of 1836 bytes in function 'gbaudio_tplg_create_widget' [-Werror,-Wframe-larger-than=] Rework this code to no longer use compound literals for initializing the structure in each case, but instead keep the common bits in a preallocated constant array and copy them as needed. Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> --- drivers/staging/greybus/audio_topology.c | 106 ++++++++++------------- 1 file changed, 47 insertions(+), 59 deletions(-) diff --git a/drivers/staging/greybus/audio_topology.c b/drivers/staging/greybus/audio_topology.c index 96b8b29fe899..c03873915c20 100644 --- a/drivers/staging/greybus/audio_topology.c +++ b/drivers/staging/greybus/audio_topology.c @@ -974,6 +974,44 @@ static int gbaudio_widget_event(struct snd_soc_dapm_widget *w, return ret; } +static const struct snd_soc_dapm_widget gbaudio_widgets[] = { + [snd_soc_dapm_spk] = SND_SOC_DAPM_SPK("spk", gbcodec_event_spk), + [snd_soc_dapm_hp] = SND_SOC_DAPM_HP("hp", gbcodec_event_hp), + [snd_soc_dapm_mic] = SND_SOC_DAPM_MIC("mic", gbcodec_event_int_mic), + [snd_soc_dapm_output] = SND_SOC_DAPM_OUTPUT("output"), + [snd_soc_dapm_input] = SND_SOC_DAPM_INPUT("input"), + [snd_soc_dapm_switch] = SND_SOC_DAPM_SWITCH_E("switch", SND_SOC_NOPM, + 0, 0, NULL, + gbaudio_widget_event, + SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), + [snd_soc_dapm_pga] = SND_SOC_DAPM_PGA_E("pga", SND_SOC_NOPM, + 0, 0, NULL, 0, + gbaudio_widget_event, + SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), + [snd_soc_dapm_mixer] = SND_SOC_DAPM_MIXER_E("mixer", SND_SOC_NOPM, + 0, 0, NULL, 0, + gbaudio_widget_event, + SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), + [snd_soc_dapm_mux] = SND_SOC_DAPM_MUX_E("mux", SND_SOC_NOPM, + 0, 0, NULL, + gbaudio_widget_event, + SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), + [snd_soc_dapm_aif_in] = SND_SOC_DAPM_AIF_IN_E("aif_in", NULL, 0, + SND_SOC_NOPM, 0, 0, + gbaudio_widget_event, + SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), + [snd_soc_dapm_aif_out] = SND_SOC_DAPM_AIF_OUT_E("aif_out", NULL, 0, + SND_SOC_NOPM, 0, 0, + gbaudio_widget_event, + SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), +}; + static int gbaudio_tplg_create_widget(struct gbaudio_module_info *module, struct snd_soc_dapm_widget *dw, struct gb_audio_widget *w, int *w_size) @@ -1050,78 +1088,28 @@ static int gbaudio_tplg_create_widget(struct gbaudio_module_info *module, strlcpy(temp_name, w->name, NAME_SIZE); snprintf(w->name, NAME_SIZE, "GB %d %s", module->dev_id, temp_name); + if (w->type > ARRAY_SIZE(gbaudio_widgets)) { + ret = -EINVAL; + goto error; + } + *dw = gbaudio_widgets[w->type]; + dw->name = w->name; + switch (w->type) { case snd_soc_dapm_spk: - *dw = (struct snd_soc_dapm_widget) - SND_SOC_DAPM_SPK(w->name, gbcodec_event_spk); module->op_devices |= GBAUDIO_DEVICE_OUT_SPEAKER; break; case snd_soc_dapm_hp: - *dw = (struct snd_soc_dapm_widget) - SND_SOC_DAPM_HP(w->name, gbcodec_event_hp); module->op_devices |= (GBAUDIO_DEVICE_OUT_WIRED_HEADSET - | GBAUDIO_DEVICE_OUT_WIRED_HEADPHONE); + | GBAUDIO_DEVICE_OUT_WIRED_HEADPHONE), module->ip_devices |= GBAUDIO_DEVICE_IN_WIRED_HEADSET; break; case snd_soc_dapm_mic: - *dw = (struct snd_soc_dapm_widget) - SND_SOC_DAPM_MIC(w->name, gbcodec_event_int_mic); module->ip_devices |= GBAUDIO_DEVICE_IN_BUILTIN_MIC; break; - case snd_soc_dapm_output: - *dw = (struct snd_soc_dapm_widget)SND_SOC_DAPM_OUTPUT(w->name); - break; - case snd_soc_dapm_input: - *dw = (struct snd_soc_dapm_widget)SND_SOC_DAPM_INPUT(w->name); - break; - case snd_soc_dapm_switch: - *dw = (struct snd_soc_dapm_widget) - SND_SOC_DAPM_SWITCH_E(w->name, SND_SOC_NOPM, 0, 0, - widget_kctls, - gbaudio_widget_event, - SND_SOC_DAPM_PRE_PMU | - SND_SOC_DAPM_POST_PMD); - break; - case snd_soc_dapm_pga: - *dw = (struct snd_soc_dapm_widget) - SND_SOC_DAPM_PGA_E(w->name, SND_SOC_NOPM, 0, 0, NULL, 0, - gbaudio_widget_event, - SND_SOC_DAPM_PRE_PMU | - SND_SOC_DAPM_POST_PMD); - break; - case snd_soc_dapm_mixer: - *dw = (struct snd_soc_dapm_widget) - SND_SOC_DAPM_MIXER_E(w->name, SND_SOC_NOPM, 0, 0, NULL, - 0, gbaudio_widget_event, - SND_SOC_DAPM_PRE_PMU | - SND_SOC_DAPM_POST_PMD); - break; - case snd_soc_dapm_mux: - *dw = (struct snd_soc_dapm_widget) - SND_SOC_DAPM_MUX_E(w->name, SND_SOC_NOPM, 0, 0, - widget_kctls, gbaudio_widget_event, - SND_SOC_DAPM_PRE_PMU | - SND_SOC_DAPM_POST_PMD); - break; case snd_soc_dapm_aif_in: - *dw = (struct snd_soc_dapm_widget) - SND_SOC_DAPM_AIF_IN_E(w->name, w->sname, 0, - SND_SOC_NOPM, - 0, 0, gbaudio_widget_event, - SND_SOC_DAPM_PRE_PMU | - SND_SOC_DAPM_POST_PMD); - break; case snd_soc_dapm_aif_out: - *dw = (struct snd_soc_dapm_widget) - SND_SOC_DAPM_AIF_OUT_E(w->name, w->sname, 0, - SND_SOC_NOPM, - 0, 0, gbaudio_widget_event, - SND_SOC_DAPM_PRE_PMU | - SND_SOC_DAPM_POST_PMD); - break; - default: - ret = -EINVAL; - goto error; + dw->sname = w->sname; } dev_dbg(module->dev, "%s: widget of type %d created\n", dw->name, -- 2.29.2

4 years, 5 months

← Newer
1
...
28
29
30
31
32
33
34
...
58
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

greybus-dev