greybus-dev

greybus-dev@lists.linaro.org

1 participants
756 discussions

[PATCH v2] greybus: gb-beagleplay: remove unneeded calls to devm_gpiod_put()

by Bartosz Golaszewski

From: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> gb_fw_init() is only called in this driver's probe() and we abort the probing if it fails. This means that calling devm_gpiod_put() in error path is not required as devres will already manage the releasing of the resources when the device is detached. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> --- Changes in v2: - add a comment to gb_fw_init() saying it must only be called from probe() drivers/greybus/gb-beagleplay.c | 25 ++++++++----------------- 1 file changed, 8 insertions(+), 17 deletions(-) diff --git a/drivers/greybus/gb-beagleplay.c b/drivers/greybus/gb-beagleplay.c index da31f1131afc..9610f878da1b 100644 --- a/drivers/greybus/gb-beagleplay.c +++ b/drivers/greybus/gb-beagleplay.c @@ -1039,9 +1039,12 @@ static const struct fw_upload_ops cc1352_bootloader_ops = { .cleanup = cc1352_cleanup }; +/* + * Must only be called from probe() as the devres resources allocated here + * will only be released on driver detach. + */ static int gb_fw_init(struct gb_beagleplay *bg) { - int ret; struct fw_upload *fwl; struct gpio_desc *desc; @@ -1060,29 +1063,17 @@ static int gb_fw_init(struct gb_beagleplay *bg) bg->bootloader_backdoor_gpio = desc; desc = devm_gpiod_get(&bg->sd->dev, "reset", GPIOD_IN); - if (IS_ERR(desc)) { - ret = PTR_ERR(desc); - goto free_boot; - } + if (IS_ERR(desc)) + return PTR_ERR(desc); bg->rst_gpio = desc; fwl = firmware_upload_register(THIS_MODULE, &bg->sd->dev, "cc1352p7", &cc1352_bootloader_ops, bg); - if (IS_ERR(fwl)) { - ret = PTR_ERR(fwl); - goto free_reset; - } + if (IS_ERR(fwl)) + return PTR_ERR(fwl); bg->fwl = fwl; return 0; - -free_reset: - devm_gpiod_put(&bg->sd->dev, bg->rst_gpio); - bg->rst_gpio = NULL; -free_boot: - devm_gpiod_put(&bg->sd->dev, bg->bootloader_backdoor_gpio); - bg->bootloader_backdoor_gpio = NULL; - return ret; } static void gb_fw_deinit(struct gb_beagleplay *bg) -- 2.48.1

9 months, 1 week

[PATCH] greybus: gb-beagleplay: remove unneeded calls to devm_gpiod_put()

by Bartosz Golaszewski

From: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> gb_fw_init() is only called in this driver's probe() and we abort the probing if it fails. This means that calling devm_gpiod_put() in error path is not required as devres will already manage the releasing of the resources when the device is detached. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> --- drivers/greybus/gb-beagleplay.c | 21 ++++----------------- 1 file changed, 4 insertions(+), 17 deletions(-) diff --git a/drivers/greybus/gb-beagleplay.c b/drivers/greybus/gb-beagleplay.c index da31f1131afc..1ea48b71a030 100644 --- a/drivers/greybus/gb-beagleplay.c +++ b/drivers/greybus/gb-beagleplay.c @@ -1041,7 +1041,6 @@ static const struct fw_upload_ops cc1352_bootloader_ops = { static int gb_fw_init(struct gb_beagleplay *bg) { - int ret; struct fw_upload *fwl; struct gpio_desc *desc; @@ -1060,29 +1059,17 @@ static int gb_fw_init(struct gb_beagleplay *bg) bg->bootloader_backdoor_gpio = desc; desc = devm_gpiod_get(&bg->sd->dev, "reset", GPIOD_IN); - if (IS_ERR(desc)) { - ret = PTR_ERR(desc); - goto free_boot; - } + if (IS_ERR(desc)) + return PTR_ERR(desc); bg->rst_gpio = desc; fwl = firmware_upload_register(THIS_MODULE, &bg->sd->dev, "cc1352p7", &cc1352_bootloader_ops, bg); - if (IS_ERR(fwl)) { - ret = PTR_ERR(fwl); - goto free_reset; - } + if (IS_ERR(fwl)) + return PTR_ERR(fwl); bg->fwl = fwl; return 0; - -free_reset: - devm_gpiod_put(&bg->sd->dev, bg->rst_gpio); - bg->rst_gpio = NULL; -free_boot: - devm_gpiod_put(&bg->sd->dev, bg->bootloader_backdoor_gpio); - bg->bootloader_backdoor_gpio = NULL; - return ret; } static void gb_fw_deinit(struct gb_beagleplay *bg) -- 2.48.1

9 months, 1 week

[PATCH 01/33] tty: introduce and use tty_port_tty_vhangup() helper

by Jiri Slaby (SUSE)

This code (tty_get -> vhangup -> tty_put) is repeated on few places. Introduce a helper similar to tty_port_tty_hangup() (asynchronous) to handle even vhangup (synchronous). And use it on those places. In fact, reuse the tty_port_tty_hangup()'s code and call tty_vhangup() depending on a new bool parameter. Signed-off-by: Jiri Slaby (SUSE) <jirislaby(a)kernel.org> Cc: Karsten Keil <isdn(a)linux-pingi.de> Cc: David Lin <dtwlin(a)gmail.com> Cc: Johan Hovold <johan(a)kernel.org> Cc: Alex Elder <elder(a)kernel.org> Cc: Oliver Neukum <oneukum(a)suse.com> Cc: Marcel Holtmann <marcel(a)holtmann.org> Cc: Johan Hedberg <johan.hedberg(a)gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz(a)gmail.com> --- Cc: netdev(a)vger.kernel.org Cc: greybus-dev(a)lists.linaro.org Cc: linux-staging(a)lists.linux.dev Cc: linux-usb(a)vger.kernel.org Cc: linux-bluetooth(a)vger.kernel.org --- drivers/isdn/capi/capi.c | 8 +------- drivers/staging/greybus/uart.c | 7 +------ drivers/tty/serial/serial_core.c | 7 +------ drivers/tty/tty_port.c | 12 ++++++++---- drivers/usb/class/cdc-acm.c | 7 +------ drivers/usb/serial/usb-serial.c | 7 +------ include/linux/tty_port.h | 12 +++++++++++- net/bluetooth/rfcomm/tty.c | 7 +------ 8 files changed, 25 insertions(+), 42 deletions(-) diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c index 70dee9ad4bae..78e6e7748fb9 100644 --- a/drivers/isdn/capi/capi.c +++ b/drivers/isdn/capi/capi.c @@ -306,15 +306,9 @@ static void capincci_alloc_minor(struct capidev *cdev, struct capincci *np) static void capincci_free_minor(struct capincci *np) { struct capiminor *mp = np->minorp; - struct tty_struct *tty; if (mp) { - tty = tty_port_tty_get(&mp->port); - if (tty) { - tty_vhangup(tty); - tty_kref_put(tty); - } - + tty_port_tty_vhangup(&mp->port); capiminor_free(mp); } } diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c index 308ed1ca9947..10df5c37c83e 100644 --- a/drivers/staging/greybus/uart.c +++ b/drivers/staging/greybus/uart.c @@ -916,7 +916,6 @@ static void gb_uart_remove(struct gbphy_device *gbphy_dev) { struct gb_tty *gb_tty = gb_gbphy_get_data(gbphy_dev); struct gb_connection *connection = gb_tty->connection; - struct tty_struct *tty; int ret; ret = gbphy_runtime_get_sync(gbphy_dev); @@ -929,11 +928,7 @@ static void gb_uart_remove(struct gbphy_device *gbphy_dev) wake_up_all(&gb_tty->wioctl); mutex_unlock(&gb_tty->mutex); - tty = tty_port_tty_get(&gb_tty->port); - if (tty) { - tty_vhangup(tty); - tty_kref_put(tty); - } + tty_port_tty_vhangup(&gb_tty->port); gb_connection_disable_rx(connection); tty_unregister_device(gb_tty_driver, gb_tty->minor); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 1f7708a91fc6..d6485714eb0f 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -3209,7 +3209,6 @@ static void serial_core_remove_one_port(struct uart_driver *drv, struct uart_state *state = drv->state + uport->line; struct tty_port *port = &state->port; struct uart_port *uart_port; - struct tty_struct *tty; mutex_lock(&port->mutex); uart_port = uart_port_check(state); @@ -3228,11 +3227,7 @@ static void serial_core_remove_one_port(struct uart_driver *drv, */ tty_port_unregister_device(port, drv->tty_driver, uport->line); - tty = tty_port_tty_get(port); - if (tty) { - tty_vhangup(port->tty); - tty_kref_put(tty); - } + tty_port_tty_vhangup(port); /* * If the port is used as a console, unregister it diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c index 4af1fbf73f51..903eebdbe12d 100644 --- a/drivers/tty/tty_port.c +++ b/drivers/tty/tty_port.c @@ -396,15 +396,19 @@ EXPORT_SYMBOL(tty_port_hangup); * @port: tty port * @check_clocal: hang only ttys with %CLOCAL unset? */ -void tty_port_tty_hangup(struct tty_port *port, bool check_clocal) +void __tty_port_tty_hangup(struct tty_port *port, bool check_clocal, bool async) { struct tty_struct *tty = tty_port_tty_get(port); - if (tty && (!check_clocal || !C_CLOCAL(tty))) - tty_hangup(tty); + if (tty && (!check_clocal || !C_CLOCAL(tty))) { + if (async) + tty_hangup(tty); + else + tty_vhangup(tty); + } tty_kref_put(tty); } -EXPORT_SYMBOL_GPL(tty_port_tty_hangup); +EXPORT_SYMBOL_GPL(__tty_port_tty_hangup); /** * tty_port_tty_wakeup - helper to wake up a tty diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index c2ecfa3c8349..f9171fbedf5c 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1571,7 +1571,6 @@ static int acm_probe(struct usb_interface *intf, static void acm_disconnect(struct usb_interface *intf) { struct acm *acm = usb_get_intfdata(intf); - struct tty_struct *tty; int i; /* sibling interface is already cleaning up */ @@ -1598,11 +1597,7 @@ static void acm_disconnect(struct usb_interface *intf) usb_set_intfdata(acm->data, NULL); mutex_unlock(&acm->mutex); - tty = tty_port_tty_get(&acm->port); - if (tty) { - tty_vhangup(tty); - tty_kref_put(tty); - } + tty_port_tty_vhangup(&acm->port); cancel_delayed_work_sync(&acm->dwork); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 7266558d823a..c78ff40b1e5f 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1176,7 +1176,6 @@ static void usb_serial_disconnect(struct usb_interface *interface) struct usb_serial *serial = usb_get_intfdata(interface); struct device *dev = &interface->dev; struct usb_serial_port *port; - struct tty_struct *tty; /* sibling interface is cleaning up */ if (!serial) @@ -1191,11 +1190,7 @@ static void usb_serial_disconnect(struct usb_interface *interface) for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; - tty = tty_port_tty_get(&port->port); - if (tty) { - tty_vhangup(tty); - tty_kref_put(tty); - } + tty_port_tty_vhangup(&port->port); usb_serial_port_poison_urbs(port); wake_up_interruptible(&port->port.delta_msr_wait); cancel_work_sync(&port->work); diff --git a/include/linux/tty_port.h b/include/linux/tty_port.h index 08f89a598366..021f9a8415c0 100644 --- a/include/linux/tty_port.h +++ b/include/linux/tty_port.h @@ -232,7 +232,7 @@ bool tty_port_carrier_raised(struct tty_port *port); void tty_port_raise_dtr_rts(struct tty_port *port); void tty_port_lower_dtr_rts(struct tty_port *port); void tty_port_hangup(struct tty_port *port); -void tty_port_tty_hangup(struct tty_port *port, bool check_clocal); +void __tty_port_tty_hangup(struct tty_port *port, bool check_clocal, bool async); void tty_port_tty_wakeup(struct tty_port *port); int tty_port_block_til_ready(struct tty_port *port, struct tty_struct *tty, struct file *filp); @@ -251,4 +251,14 @@ static inline int tty_port_users(struct tty_port *port) return port->count + port->blocked_open; } +static inline void tty_port_tty_hangup(struct tty_port *port, bool check_clocal) +{ + __tty_port_tty_hangup(port, check_clocal, true); +} + +static inline void tty_port_tty_vhangup(struct tty_port *port) +{ + __tty_port_tty_hangup(port, false, false); +} + #endif diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index 21a5b5535ebc..827dfbe66085 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -438,7 +438,6 @@ static int __rfcomm_release_dev(void __user *arg) { struct rfcomm_dev_req req; struct rfcomm_dev *dev; - struct tty_struct *tty; if (copy_from_user(&req, arg, sizeof(req))) return -EFAULT; @@ -464,11 +463,7 @@ static int __rfcomm_release_dev(void __user *arg) rfcomm_dlc_close(dev->dlc, 0); /* Shut down TTY synchronously before freeing rfcomm_dev */ - tty = tty_port_tty_get(&dev->port); - if (tty) { - tty_vhangup(tty); - tty_kref_put(tty); - } + tty_port_tty_vhangup(&dev->port); if (!test_bit(RFCOMM_TTY_OWNED, &dev->status)) tty_port_put(&dev->port); -- 2.49.0

9 months, 1 week

[PATCH] greybus: firmware: use strscpy, fix tag size

by Pranav Tyagi

Increase the size of firmware_tag arrays in the following structs from GB_FIRMWARE_U_TAG_MAX_SIZE to GB_FIRMWARE_U_TAG_MAX_SIZE + 1 to accommodate null termination: - fw_mgmt_ioc_intf_load_and_validate - fw_mgmt_ioc_get_backend_version - fw_mgmt_ioc_backend_fw_update - fw_mgmt_ioc_get_intf_version Replace strncpy() with strscpy() to ensure proper null termination as firmware_tag is interpreted as a null-terminated string and printed with %s. Signed-off-by: Pranav Tyagi <pranav.tyagi03(a)gmail.com> --- .../greybus/Documentation/firmware/firmware.c | 12 ++++++------ drivers/staging/greybus/greybus_firmware.h | 8 ++++---- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/staging/greybus/Documentation/firmware/firmware.c b/drivers/staging/greybus/Documentation/firmware/firmware.c index 765d69faa9cc..3b4061f4b34a 100644 --- a/drivers/staging/greybus/Documentation/firmware/firmware.c +++ b/drivers/staging/greybus/Documentation/firmware/firmware.c @@ -63,8 +63,8 @@ static int update_intf_firmware(int fd) intf_load.major = 0; intf_load.minor = 0; - strncpy((char *)&intf_load.firmware_tag, firmware_tag, - GB_FIRMWARE_U_TAG_MAX_SIZE); + strscpy((char *)&intf_load.firmware_tag, firmware_tag, + GB_FIRMWARE_U_TAG_MAX_SIZE + 1); ret = ioctl(fd, FW_MGMT_IOC_INTF_LOAD_AND_VALIDATE, &intf_load); if (ret < 0) { @@ -101,8 +101,8 @@ static int update_backend_firmware(int fd) /* Get Backend Firmware Version */ printf("Getting Backend Firmware Version\n"); - strncpy((char *)&backend_fw_info.firmware_tag, firmware_tag, - GB_FIRMWARE_U_TAG_MAX_SIZE); + strscpy((char *)&backend_fw_info.firmware_tag, firmware_tag, + GB_FIRMWARE_U_TAG_MAX_SIZE + 1); retry_fw_version: ret = ioctl(fd, FW_MGMT_IOC_GET_BACKEND_FW, &backend_fw_info); @@ -129,8 +129,8 @@ static int update_backend_firmware(int fd) /* Try Backend Firmware Update over Unipro */ printf("Updating Backend Firmware\n"); - strncpy((char *)&backend_update.firmware_tag, firmware_tag, - GB_FIRMWARE_U_TAG_MAX_SIZE); + strscpy((char *)&backend_update.firmware_tag, firmware_tag, + GB_FIRMWARE_U_TAG_MAX_SIZE + 1); retry_fw_update: backend_update.status = 0; diff --git a/drivers/staging/greybus/greybus_firmware.h b/drivers/staging/greybus/greybus_firmware.h index b6042a82ada4..ad5b2c8a6461 100644 --- a/drivers/staging/greybus/greybus_firmware.h +++ b/drivers/staging/greybus/greybus_firmware.h @@ -38,20 +38,20 @@ /* IOCTL support */ struct fw_mgmt_ioc_get_intf_version { - __u8 firmware_tag[GB_FIRMWARE_U_TAG_MAX_SIZE]; + __u8 firmware_tag[GB_FIRMWARE_U_TAG_MAX_SIZE + 1]; __u16 major; __u16 minor; } __packed; struct fw_mgmt_ioc_get_backend_version { - __u8 firmware_tag[GB_FIRMWARE_U_TAG_MAX_SIZE]; + __u8 firmware_tag[GB_FIRMWARE_U_TAG_MAX_SIZE + 1]; __u16 major; __u16 minor; __u8 status; } __packed; struct fw_mgmt_ioc_intf_load_and_validate { - __u8 firmware_tag[GB_FIRMWARE_U_TAG_MAX_SIZE]; + __u8 firmware_tag[GB_FIRMWARE_U_TAG_MAX_SIZE + 1]; __u8 load_method; __u8 status; __u16 major; @@ -59,7 +59,7 @@ struct fw_mgmt_ioc_intf_load_and_validate { } __packed; struct fw_mgmt_ioc_backend_fw_update { - __u8 firmware_tag[GB_FIRMWARE_U_TAG_MAX_SIZE]; + __u8 firmware_tag[GB_FIRMWARE_U_TAG_MAX_SIZE + 1]; __u8 status; } __packed; -- 2.49.0

9 months, 2 weeks

[RFC] spi: expand bits_per_word_mask to 64 bits

by Da Xue

Most current controller IP support 64-bit words. Update the mask to u64 from u32. Signed-off-by: Da Xue <da(a)libre.computer> --- drivers/iio/adc/ad7949.c | 2 +- drivers/spi/spi-dln2.c | 2 +- drivers/spi/spi-ingenic.c | 2 +- drivers/spi/spi-sh-msiof.c | 2 +- drivers/spi/spi.c | 4 ++-- drivers/staging/greybus/spilib.c | 2 +- include/linux/spi/altera.h | 2 +- include/linux/spi/spi.h | 6 +++--- 8 files changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/iio/adc/ad7949.c b/drivers/iio/adc/ad7949.c index edd0c3a35ab7..469789ffa4a3 100644 --- a/drivers/iio/adc/ad7949.c +++ b/drivers/iio/adc/ad7949.c @@ -308,7 +308,7 @@ static void ad7949_disable_reg(void *reg) static int ad7949_spi_probe(struct spi_device *spi) { - u32 spi_ctrl_mask = spi->controller->bits_per_word_mask; + u64 spi_ctrl_mask = spi->controller->bits_per_word_mask; struct device *dev = &spi->dev; const struct ad7949_adc_spec *spec; struct ad7949_adc_chip *ad7949_adc; diff --git a/drivers/spi/spi-dln2.c b/drivers/spi/spi-dln2.c index 2013bc56ded8..cccbb00ad5ce 100644 --- a/drivers/spi/spi-dln2.c +++ b/drivers/spi/spi-dln2.c @@ -315,7 +315,7 @@ static int dln2_spi_set_bpw(struct dln2_spi *dln2, u8 bpw) } static int dln2_spi_get_supported_frame_sizes(struct dln2_spi *dln2, - u32 *bpw_mask) + u64 *bpw_mask) { int ret; struct { diff --git a/drivers/spi/spi-ingenic.c b/drivers/spi/spi-ingenic.c index 318b0768701e..21d453d6e46e 100644 --- a/drivers/spi/spi-ingenic.c +++ b/drivers/spi/spi-ingenic.c @@ -51,7 +51,7 @@ #define SPI_INGENIC_FIFO_SIZE 128u struct jz_soc_info { - u32 bits_per_word_mask; + u64 bits_per_word_mask; struct reg_field flen_field; bool has_trendian; diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index 94a867967e02..97f5a6192279 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -33,7 +33,7 @@ #define SH_MSIOF_FLAG_FIXED_DTDL_200 BIT(0) struct sh_msiof_chipdata { - u32 bits_per_word_mask; + u64 bits_per_word_mask; u16 tx_fifo_size; u16 rx_fifo_size; u16 ctlr_flags; diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 1bc0fdbb1bd7..4f47201f2462 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -3824,8 +3824,8 @@ static int __spi_validate_bits_per_word(struct spi_controller *ctlr, u8 bits_per_word) { if (ctlr->bits_per_word_mask) { - /* Only 32 bits fit in the mask */ - if (bits_per_word > 32) + /* Only 64 bits fit in the mask */ + if (bits_per_word > 64) return -EINVAL; if (!(ctlr->bits_per_word_mask & SPI_BPW_MASK(bits_per_word))) return -EINVAL; diff --git a/drivers/staging/greybus/spilib.c b/drivers/staging/greybus/spilib.c index 24e9c909fa02..087eed1879b1 100644 --- a/drivers/staging/greybus/spilib.c +++ b/drivers/staging/greybus/spilib.c @@ -27,7 +27,7 @@ struct gb_spilib { unsigned int op_timeout; u16 mode; u16 flags; - u32 bits_per_word_mask; + u64 bits_per_word_mask; u8 num_chipselect; u32 min_speed_hz; u32 max_speed_hz; diff --git a/include/linux/spi/altera.h b/include/linux/spi/altera.h index 3b74c3750caf..d6e036ed00e2 100644 --- a/include/linux/spi/altera.h +++ b/include/linux/spi/altera.h @@ -24,7 +24,7 @@ struct altera_spi_platform_data { u16 mode_bits; u16 num_chipselect; - u32 bits_per_word_mask; + u64 bits_per_word_mask; u16 num_devices; struct spi_board_info *devices; }; diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 4789f91dae94..f44120d5a63c 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -586,7 +586,7 @@ struct spi_controller { u32 buswidth_override_bits; /* Bitmask of supported bits_per_word for transfers */ - u32 bits_per_word_mask; + u64 bits_per_word_mask; #define SPI_BPW_MASK(bits) BIT((bits) - 1) #define SPI_BPW_RANGE_MASK(min, max) GENMASK((max) - 1, (min) - 1) @@ -1329,9 +1329,9 @@ spi_max_transfer_size(struct spi_device *spi) */ static inline bool spi_is_bpw_supported(struct spi_device *spi, u32 bpw) { - u32 bpw_mask = spi->controller->bits_per_word_mask; + u64 bpw_mask = spi->controller->bits_per_word_mask; - if (bpw == 8 || (bpw <= 32 && bpw_mask & SPI_BPW_MASK(bpw))) + if (bpw == 8 || (bpw <= 64 && bpw_mask & SPI_BPW_MASK(bpw))) return true; return false; -- 2.39.5

9 months, 3 weeks

[PATCH] staging: greybus: remove unnecessary GPIO line direction check

by Bartosz Golaszewski

From: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> As of commit 92ac7de3175e3 ("gpiolib: don't allow setting values on input lines"), the GPIO core makes sure values cannot be set on input lines. Remove the unnecessary check. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> --- drivers/staging/greybus/gpio.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/staging/greybus/gpio.c b/drivers/staging/greybus/gpio.c index f81c34160f720..1280530c8987a 100644 --- a/drivers/staging/greybus/gpio.c +++ b/drivers/staging/greybus/gpio.c @@ -192,12 +192,6 @@ static int gb_gpio_set_value_operation(struct gb_gpio_controller *ggc, struct gb_gpio_set_value_request request; int ret; - if (ggc->lines[which].direction == 1) { - dev_warn(dev, "refusing to set value of input gpio %u\n", - which); - return -EPERM; - } - request.which = which; request.value = value_high ? 1 : 0; ret = gb_operation_sync(ggc->connection, GB_GPIO_TYPE_SET_VALUE, -- 2.48.1

9 months, 3 weeks

[PATCH] staging : greybus : Documentation : firmware : Replace deprecated strncpy() with strscpy()

by rujra

To ensuring that the firmware_tag is properly null-terminated. When copying firmware tag strings to prevent buffer overflows and ensure data integrity. The maximum size of tag is GB_FIRMWARE_U_TAG_MAX_SIZE = 10 bytes, and it may or may not be NULL-terminated. included in "greybus_firmware.h" changes has been made at 3 positions: 1: update firmware tag 2: backend update firmware tag 3: backend update firmware tag with unipro Signed-off-by: Rujra Bhatt <braker.noob.kernel(a)gmail.com> --- drivers/staging/greybus/Documentation/firmware/firmware.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/staging/greybus/Documentation/firmware/firmware.c b/drivers/staging/greybus/Documentation/firmware/firmware.c index 765d69faa..f37904b91 100644 --- a/drivers/staging/greybus/Documentation/firmware/firmware.c +++ b/drivers/staging/greybus/Documentation/firmware/firmware.c @@ -63,7 +63,7 @@ static int update_intf_firmware(int fd) intf_load.major = 0; intf_load.minor = 0; - strncpy((char *)&intf_load.firmware_tag, firmware_tag, + strscpy((char *)&intf_load.firmware_tag, firmware_tag, GB_FIRMWARE_U_TAG_MAX_SIZE); ret = ioctl(fd, FW_MGMT_IOC_INTF_LOAD_AND_VALIDATE, &intf_load); @@ -101,7 +101,7 @@ static int update_backend_firmware(int fd) /* Get Backend Firmware Version */ printf("Getting Backend Firmware Version\n"); - strncpy((char *)&backend_fw_info.firmware_tag, firmware_tag, + strscpy((char *)&backend_fw_info.firmware_tag, firmware_tag, GB_FIRMWARE_U_TAG_MAX_SIZE); retry_fw_version: @@ -129,7 +129,7 @@ static int update_backend_firmware(int fd) /* Try Backend Firmware Update over Unipro */ printf("Updating Backend Firmware\n"); - strncpy((char *)&backend_update.firmware_tag, firmware_tag, + strscpy((char *)&backend_update.firmware_tag, firmware_tag, GB_FIRMWARE_U_TAG_MAX_SIZE); retry_fw_update: -- 2.43.0

10 months

[PATCH v2] greybus: Avoid fake flexible array for response data

by clingfei

We want to get rid of zero size arrays and use flexible arrays instead. However, in this case the struct is just one flexible array of u8 which adds no value. Just use a pointer instead. v1: https://lore.kernel.org/all/202505262032.507AD8E0DC@keescook/ Signed-off-by: clingfei <clf700383(a)gmail.com> --- drivers/staging/greybus/i2c.c | 12 ++++-------- include/linux/greybus/greybus_protocols.h | 3 --- 2 files changed, 4 insertions(+), 11 deletions(-) diff --git a/drivers/staging/greybus/i2c.c b/drivers/staging/greybus/i2c.c index 14f1ff6d448c..b248d6717b71 100644 --- a/drivers/staging/greybus/i2c.c +++ b/drivers/staging/greybus/i2c.c @@ -144,15 +144,14 @@ gb_i2c_operation_create(struct gb_connection *connection, } static void gb_i2c_decode_response(struct i2c_msg *msgs, u32 msg_count, - struct gb_i2c_transfer_response *response) + u8 *data) { struct i2c_msg *msg = msgs; - u8 *data; u32 i; - if (!response) + if (!data) return; - data = response->data; + for (i = 0; i < msg_count; i++) { if (msg->flags & I2C_M_RD) { memcpy(msg->buf, data, msg->len); @@ -188,10 +187,7 @@ static int gb_i2c_transfer_operation(struct gb_i2c_device *gb_i2c_dev, ret = gb_operation_request_send_sync(operation); if (!ret) { - struct gb_i2c_transfer_response *response; - - response = operation->response->payload; - gb_i2c_decode_response(msgs, msg_count, response); + gb_i2c_decode_response(msgs, msg_count, operation->response->payload); ret = msg_count; } else if (!gb_i2c_expected_transfer_error(ret)) { dev_err(dev, "transfer operation failed (%d)\n", ret); diff --git a/include/linux/greybus/greybus_protocols.h b/include/linux/greybus/greybus_protocols.h index 820134b0105c..6a35c78b967b 100644 --- a/include/linux/greybus/greybus_protocols.h +++ b/include/linux/greybus/greybus_protocols.h @@ -678,9 +678,6 @@ struct gb_i2c_transfer_request { __le16 op_count; struct gb_i2c_transfer_op ops[]; /* op_count of these */ } __packed; -struct gb_i2c_transfer_response { - __u8 data[0]; /* inbound data */ -} __packed; /* GPIO */ -- 2.34.1

10 months, 1 week

[PATCH] greybus: Avoid fake flexible array for response data

by clingfei

As https://lore.kernel.org/all/20240304211940.it.083-kees@kernel.org/ pointed out, to enforce the 0-sized destinations, the remaining 0-sized destinations need to be handled. Thus the struct gb_control_get_manifest_response and struct gb_i2c_transfer_response are removed. Signed-off-by: clingfei <clf700383(a)gmail.com> --- drivers/staging/greybus/i2c.c | 9 ++++----- include/linux/greybus/greybus_protocols.h | 9 --------- 2 files changed, 4 insertions(+), 14 deletions(-) diff --git a/drivers/staging/greybus/i2c.c b/drivers/staging/greybus/i2c.c index 14f1ff6d448c..2857c2834206 100644 --- a/drivers/staging/greybus/i2c.c +++ b/drivers/staging/greybus/i2c.c @@ -144,15 +144,14 @@ gb_i2c_operation_create(struct gb_connection *connection, } static void gb_i2c_decode_response(struct i2c_msg *msgs, u32 msg_count, - struct gb_i2c_transfer_response *response) + u8 *data) { struct i2c_msg *msg = msgs; - u8 *data; u32 i; - if (!response) + if (!data) return; - data = response->data; + for (i = 0; i < msg_count; i++) { if (msg->flags & I2C_M_RD) { memcpy(msg->buf, data, msg->len); @@ -188,7 +187,7 @@ static int gb_i2c_transfer_operation(struct gb_i2c_device *gb_i2c_dev, ret = gb_operation_request_send_sync(operation); if (!ret) { - struct gb_i2c_transfer_response *response; + u8 *response; response = operation->response->payload; gb_i2c_decode_response(msgs, msg_count, response); diff --git a/include/linux/greybus/greybus_protocols.h b/include/linux/greybus/greybus_protocols.h index 820134b0105c..14395f9300d6 100644 --- a/include/linux/greybus/greybus_protocols.h +++ b/include/linux/greybus/greybus_protocols.h @@ -110,11 +110,6 @@ struct gb_control_get_manifest_size_response { __le16 size; } __packed; -/* Control protocol manifest get request has no payload */ -struct gb_control_get_manifest_response { - __u8 data[0]; -} __packed; - /* Control protocol [dis]connected request */ struct gb_control_connected_request { __le16 cport_id; @@ -678,10 +673,6 @@ struct gb_i2c_transfer_request { __le16 op_count; struct gb_i2c_transfer_op ops[]; /* op_count of these */ } __packed; -struct gb_i2c_transfer_response { - __u8 data[0]; /* inbound data */ -} __packed; - /* GPIO */ -- 2.34.1

10 months, 1 week

[PATCH] greybus: Remove gb_control_get_manifest_response struct

by clingfei

The gb_control_get_manifest_response struct is not used. So we delete it in this commit. Signed-off-by: clingfei <clf700383(a)gmail.com> --- include/linux/greybus/greybus_protocols.h | 5 ----- 1 file changed, 5 deletions(-) diff --git a/include/linux/greybus/greybus_protocols.h b/include/linux/greybus/greybus_protocols.h index 820134b0105c..dd09dc691dda 100644 --- a/include/linux/greybus/greybus_protocols.h +++ b/include/linux/greybus/greybus_protocols.h @@ -110,11 +110,6 @@ struct gb_control_get_manifest_size_response { __le16 size; } __packed; -/* Control protocol manifest get request has no payload */ -struct gb_control_get_manifest_response { - __u8 data[0]; -} __packed; - /* Control protocol [dis]connected request */ struct gb_control_connected_request { __le16 cport_id; -- 2.34.1

10 months, 1 week

← Newer
1
...
16
17
18
19
20
21
22
...
76
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

greybus-dev