Ping! (Added Arnd to the CC list)
On 04/27/2015 09:40 AM, Hans Verkuil wrote:
Added the y2038 mailinglist since I would like to get their input for this API.
Y2038 experts, can you take a look at my comment in the code below?
Thanks!
Arnd, I just saw your patch series adding struct __kernel_timespec to uapi/linux/time.h. I get the feeling that it might take a few kernel cycles before we have a timespec64 available in userspace. Based on that I think this CEC API should drop the timestamps for now and wait until timespec64 becomes available before adding it.
The timestamps are a nice-to-have, but not critical. So adding it later shouldn't be a problem. What is your opinion?
Hans
On 04/23/2015 03:03 PM, Kamil Debski wrote:
From: Hans Verkuil hansverk@cisco.com
The added HDMI CEC framework provides a generic kernel interface for HDMI CEC devices.
Signed-off-by: Hans Verkuil hansverk@cisco.com [k.debski@samsung.com: Merged CEC Updates commit by Hans Verkuil] [k.debski@samsung.com: Merged Update author commit by Hans Verkuil] [k.debski@samsung.com: change kthread handling when setting logical address] [k.debski@samsung.com: code cleanup and fixes] [k.debski@samsung.com: add missing CEC commands to match spec] [k.debski@samsung.com: add RC framework support] [k.debski@samsung.com: move and edit documentation] [k.debski@samsung.com: add vendor id reporting] [k.debski@samsung.com: add possibility to clear assigned logical addresses] [k.debski@samsung.com: documentation fixes, clenaup and expansion] [k.debski@samsung.com: reorder of API structs and add reserved fields] [k.debski@samsung.com: fix handling of events and fix 32/64bit timespec problem] [k.debski@samsung.com: add cec.h to include/uapi/linux/Kbuild] Signed-off-by: Kamil Debski k.debski@samsung.com
Documentation/cec.txt | 396 ++++++++++++++++ drivers/media/Kconfig | 6 + drivers/media/Makefile | 2 + drivers/media/cec.c | 1161 +++++++++++++++++++++++++++++++++++++++++++++ include/media/cec.h | 140 ++++++ include/uapi/linux/Kbuild | 1 + include/uapi/linux/cec.h | 303 ++++++++++++ 7 files changed, 2009 insertions(+) create mode 100644 Documentation/cec.txt create mode 100644 drivers/media/cec.c create mode 100644 include/media/cec.h create mode 100644 include/uapi/linux/cec.h
<snip>
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index 4842a98..5854cfd 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -81,6 +81,7 @@ header-y += capi.h header-y += cciss_defs.h header-y += cciss_ioctl.h header-y += cdrom.h +header-y += cec.h header-y += cgroupstats.h header-y += chio.h header-y += cm4000_cs.h diff --git a/include/uapi/linux/cec.h b/include/uapi/linux/cec.h new file mode 100644 index 0000000..bb6d66c --- /dev/null +++ b/include/uapi/linux/cec.h @@ -0,0 +1,303 @@ +#ifndef _CEC_H +#define _CEC_H
+#include <linux/types.h>
+struct cec_time {
- __u64 sec;
- __u64 nsec;
+};
I don't like having to introduce a new struct for time here. Basically we are only doing this because there is still no public struct timespec64.
When will that struct become available for use in a public API? If it is 4.2, then we can start using it. If it will take longer, then what alternative can we use to prevent having to change the API later?
One alternative might be to drop it for now and just reserve space in the structs to add it later.
Input from the y2038 experts will be welcome!
Regards,
Hans
+struct cec_msg {
- struct cec_time ts;
- __u32 len;
- __u32 status;
- __u32 timeout;
- /* timeout (in ms) is used to timeout CEC_RECEIVE.
Set to 0 if you want to wait forever. */- __u8 msg[16];
- __u8 reply;
- /* If non-zero, then wait for a reply with this opcode.
If there was an error when sending the msg or FeatureAbortwas returned, then reply is set to 0.If reply is non-zero upon return, then len/msg are set tothe received message.If reply is zero upon return and status has theCEC_TX_STATUS_FEATURE_ABORT bit set, then len/msg are set to thereceived feature abort message.If reply is zero upon return and status has theCEC_TX_STATUS_REPLY_TIMEOUTbit set, then no reply was seen at all.This field is ignored with CEC_RECEIVE.If reply is non-zero for CEC_TRANSMIT and the message is a broadcast,then -EINVAL is returned.if reply is non-zero, then timeout is set to 1000 (the requiredmaximum response time).*/- __u8 reserved[31];
+};
+static inline __u8 cec_msg_initiator(const struct cec_msg *msg) +{
- return msg->msg[0] >> 4;
+}
+static inline __u8 cec_msg_destination(const struct cec_msg *msg) +{
- return msg->msg[0] & 0xf;
+}
+static inline bool cec_msg_is_broadcast(const struct cec_msg *msg) +{
- return (msg->msg[0] & 0xf) == 0xf;
+}
+/* cec status field */ +#define CEC_TX_STATUS_OK (0) +#define CEC_TX_STATUS_ARB_LOST (1 << 0) +#define CEC_TX_STATUS_RETRY_TIMEOUT (1 << 1) +#define CEC_TX_STATUS_FEATURE_ABORT (1 << 2) +#define CEC_TX_STATUS_REPLY_TIMEOUT (1 << 3) +#define CEC_RX_STATUS_READY (0)
+#define CEC_LOG_ADDR_INVALID 0xff
+/* The maximum number of logical addresses one device can be assigned to.
- The CEC 2.0 spec allows for only 2 logical addresses at the moment. The
- Analog Devices CEC hardware supports 3. So let's go wild and go for 4. */
+#define CEC_MAX_LOG_ADDRS 4
+/* The "Primary Device Type" */ +#define CEC_PRIM_DEVTYPE_TV 0 +#define CEC_PRIM_DEVTYPE_RECORD 1 +#define CEC_PRIM_DEVTYPE_TUNER 3 +#define CEC_PRIM_DEVTYPE_PLAYBACK 4 +#define CEC_PRIM_DEVTYPE_AUDIOSYSTEM 5 +#define CEC_PRIM_DEVTYPE_SWITCH 6 +#define CEC_PRIM_DEVTYPE_VIDEOPROC 7
+/* The "All Device Types" flags (CEC 2.0) */ +#define CEC_FL_ALL_DEVTYPE_TV (1 << 7) +#define CEC_FL_ALL_DEVTYPE_RECORD (1 << 6) +#define CEC_FL_ALL_DEVTYPE_TUNER (1 << 5) +#define CEC_FL_ALL_DEVTYPE_PLAYBACK (1 << 4) +#define CEC_FL_ALL_DEVTYPE_AUDIOSYSTEM (1 << 3) +#define CEC_FL_ALL_DEVTYPE_SWITCH (1 << 2) +/* And if you wondering what happened to VIDEOPROC devices: those should
- be mapped to a SWITCH. */
+/* The logical address types that the CEC device wants to claim */ +#define CEC_LOG_ADDR_TYPE_TV 0 +#define CEC_LOG_ADDR_TYPE_RECORD 1 +#define CEC_LOG_ADDR_TYPE_TUNER 2 +#define CEC_LOG_ADDR_TYPE_PLAYBACK 3 +#define CEC_LOG_ADDR_TYPE_AUDIOSYSTEM 4 +#define CEC_LOG_ADDR_TYPE_SPECIFIC 5 +#define CEC_LOG_ADDR_TYPE_UNREGISTERED 6 +/* Switches should use UNREGISTERED.
- Video processors should use SPECIFIC. */
+/* The CEC version */ +#define CEC_VERSION_1_4B 5 +#define CEC_VERSION_2_0 6
+struct cec_event {
- struct cec_time ts;
- __u32 event;
- __u8 reserved[4];
+};
+/* The CEC state */ +#define CEC_STATE_DISABLED 0 +#define CEC_STATE_ENABLED 1
+/* Userspace has to configure the adapter state (enable/disable) */ +#define CEC_CAP_STATE (1 << 0) +/* Userspace has to configure the physical address */ +#define CEC_CAP_PHYS_ADDR (1 << 1) +/* Userspace has to configure the logical addresses */ +#define CEC_CAP_LOG_ADDRS (1 << 2) +/* Userspace can transmit messages */ +#define CEC_CAP_TRANSMIT (1 << 3) +/* Userspace can receive messages */ +#define CEC_CAP_RECEIVE (1 << 4) +/* Userspace has to configure the vendor id */ +#define CEC_CAP_VENDOR_ID (1 << 5) +/* The hardware has the possibility to work in the promiscuous mode */ +#define CEC_CAP_PROMISCUOUS (1 << 6)
+struct cec_caps {
- __u32 available_log_addrs;
- __u32 capabilities;
- __u32 vendor_id;
- __u8 version;
- __u8 reserved[11];
+};
+struct cec_log_addrs {
- __u8 cec_version;
- __u8 num_log_addrs;
- __u8 primary_device_type[CEC_MAX_LOG_ADDRS];
- __u8 log_addr_type[CEC_MAX_LOG_ADDRS];
- __u8 log_addr[CEC_MAX_LOG_ADDRS];
- /* CEC 2.0 */
- __u8 all_device_types;
- __u8 features[CEC_MAX_LOG_ADDRS][12];
- __u8 reserved[9];
+};
+/* Commands */
+/* One Touch Play Feature */ +#define CEC_OP_ACTIVE_SOURCE 0x82 +#define CEC_OP_IMAGE_VIEW_ON 0x04 +#define CEC_OP_TEXT_VIEW_ON 0x0d
+/* Routing Control Feature */ +#define CEC_OP_ACTIVE_SOURCE 0x82 +#define CEC_OP_INACTIVE_SOURCE 0x9d +#define CEC_OP_REQUEST_ACTIVE_SOURCE 0x85 +#define CEC_OP_ROUTING_CHANGE 0x80 +#define CEC_OP_ROUTING_INFORMATION 0x81 +#define CEC_OP_SET_STREAM_PATH 0x86
+/* Standby Feature */ +#define CEC_OP_STANDBY 0x36
+/* One Touch Record Feature */ +#define CEC_OP_RECORD_OFF 0x0b +#define CEC_OP_RECORD_ON 0x09 +#define CEC_OP_RECORD_STATUS 0x0a +#define CEC_OP_RECORD_TV_SCREEN 0x0f
+/* Timer Programming Feature */ +#define CEC_OP_CLEAR_ANALOGUE_TIMER 0x33 +#define CEC_OP_CLEAR_DIGITAL_TIMER 0x99 +#define CEC_OP_CLEAR_EXT_TIMER 0xa1 +#define CEC_OP_SET_ANALOGUE_TIMER 0x34 +#define CEC_OP_SET_DIGITAL_TIMER 0x97 +#define CEC_OP_SET_EXT_TIMER 0xa2 +#define CEC_OP_SET_EXT_PROGRAM_TIMER 0x67 +#define CEC_OP_TIMER_CLEARED_STATUS 0x43 +#define CEC_OP_TIMER_STATUS 0x35
+/* System Information Feature */ +#define CEC_OP_CEC_VERSION 0x9e +#define CEC_OP_GET_CEC_VERSION 0x9f +#define CEC_OP_GIVE_PHYSICAL_ADDR 0x83 +#define CEC_OP_GET_MENU_LANGUAGE 0x91 +#define CEC_OP_REPORT_PHYSICAL_ADDR 0x84 +#define CEC_OP_SET_MENU_LANGUAGE 0x32
+/* Deck Control Feature */ +#define CEC_OP_DECK_CONTROL 0x42 +#define CEC_OP_DECK_STATUS 0x1b +#define CEC_OP_GIVE_DECK_STATUS 0x1a +#define CEC_OP_PLAY 0x41
+/* Tuner Control Feature */ +#define CEC_OP_GIVE_TUNER_DEVICE_STATUS 0x08 +#define CEC_OP_SELECT_ANALOGUE_SERVICE 0x92 +#define CEC_OP_SELECT_DIGITAL_SERVICE 0x93 +#define CEC_OP_TUNER_DEVICE_STATUS 0x07 +#define CEC_OP_TUNER_STEP_DECREMENT 0x06 +#define CEC_OP_TUNER_STEP_INCREMENT 0x05
+/* Vendor Specific Commands Feature */ +#define CEC_OP_CEC_VERSION 0x9e +#define CEC_OP_DEVICE_VENDOR_ID 0x87 +#define CEC_OP_GET_CEC_VERSION 0x9f +#define CEC_OP_GIVE_DEVICE_VENDOR_ID 0x8c +#define CEC_OP_VENDOR_COMMAND 0x89 +#define CEC_OP_VENDOR_COMMAND_WITH_ID 0xa0 +#define CEC_OP_VENDOR_REMOTE_BUTTON_DOWN 0x8a +#define CEC_OP_VENDOR_REMOTE_BUTTON_UP 0x8b
+/* OSD Display Feature */ +#define CEC_OP_SET_OSD_STRING 0x64
+/* Device OSD Transfer Feature */ +#define CEC_OP_GIVE_OSD_NAME 0x46 +#define CEC_OP_SET_OSD_NAME 0x47
+/* Device Menu Control Feature */ +#define CEC_OP_MENU_REQUEST 0x8d +#define CEC_OP_MENU_STATUS 0x8e +#define CEC_OP_USER_CONTROL_PRESSED 0x44 +#define CEC_OP_USER_CONTROL_RELEASED 0x45
+/* Power Status Feature */ +#define CEC_OP_GIVE_DEVICE_POWER_STATUS 0x8f +#define CEC_OP_REPORT_POWER_STATUS 0x90 +#define CEC_OP_FEATURE_ABORT 0x00 +#define CEC_OP_ABORT 0xff
+/* System Audio Control Feature */ +#define CEC_OP_GIVE_AUDIO_STATUS 0x71 +#define CEC_OP_GIVE_SYSTEM_AUDIO_MODE_STATUS 0x7d +#define CEC_OP_REPORT_AUDIO_STATUS 0x7a +#define CEC_OP_SET_SYSTEM_AUDIO_MODE 0x72 +#define CEC_OP_SYSTEM_AUDIO_MODE_REQUEST 0x70 +#define CEC_OP_SYSTEM_AUDIO_MODE_STATUS 0x7e
+/* Audio Rate Control Feature */ +#define CEC_OP_SET_AUDIO_RATE 0x9a
+/* Events */ +/* Event that occurs when a cable is connected */ +#define CEC_EVENT_CONNECT 1 +/* Event that occurs when all logical addresses were claimed */ +#define CEC_EVENT_READY 2 +/* Event that is sent when the cable is disconnected */ +#define CEC_EVENT_DISCONNECT 3
+/* ioctls */
+/* issue a CEC command */ +#define CEC_G_CAPS _IOWR('a', 0, struct cec_caps) +#define CEC_TRANSMIT _IOWR('a', 1, struct cec_msg) +#define CEC_RECEIVE _IOWR('a', 2, struct cec_msg)
+/*
- Configure the CEC adapter. It sets the device type and which
- logical types it will try to claim. It will return which
- logical addresses it could actually claim.
- An error is returned if the adapter is disabled or if there
- is no physical address assigned.
- */
+#define CEC_G_ADAP_LOG_ADDRS _IOR('a', 3, struct cec_log_addrs) +#define CEC_S_ADAP_LOG_ADDRS _IOWR('a', 4, struct cec_log_addrs)
+/*
- Enable/disable the adapter. The Set state ioctl may not
- be available if that is handled internally.
- */
+#define CEC_G_ADAP_STATE _IOR('a', 5, __u32) +#define CEC_S_ADAP_STATE _IOW('a', 6, __u32)
+/*
- phys_addr is either 0 (if this is the CEC root device)
- or a valid physical address obtained from the sink's EDID
- as read by this CEC device (if this is a source device)
- or a physical address obtained and modified from a sink
- EDID and used for a sink CEC device.
- If nothing is connected, then phys_addr is 0xffff.
- See HDMI 1.4b, section 8.7 (Physical Address).
- The Set ioctl may not be available if that is handled
- internally.
- */
+#define CEC_G_ADAP_PHYS_ADDR _IOR('a', 7, __u16) +#define CEC_S_ADAP_PHYS_ADDR _IOW('a', 8, __u16)
+#define CEC_G_EVENT _IOWR('a', 9, struct cec_event) +/*
- Read and set the vendor ID of the CEC adapter.
- */
+#define CEC_G_VENDOR_ID _IOR('a', 9, __u32) +#define CEC_S_VENDOR_ID _IOW('a', 10, __u32)
+#endif
Y2038 mailing list Y2038@lists.linaro.org https://lists.linaro.org/mailman/listinfo/y2038