Y2038 March 2019

y2038@lists.linaro.org

4 participants
5 discussions

[PATCH 0/2] Unify the system call scripts

by Firoz Khan

System call table generation support is provided for alpha, ia64, m68k, microblaze, mips, parisc, powerpc, sh, sparc and xtensa architectures. The implementat- ions are almost similar across all the above archte- ctures. In order to reduce the source code across all the above architectures, create common ".sh" files and keep it in the common directory, script/. This will be a generic scripts which can use for all the above architectures. This patch depends on; https://lore.kernel.org/lkml/1546439331-18646-1-git-send-email-firoz.khan@l… Firoz Khan (2): mips: remove nargs from __SYSCALL mips: generate uapi header and system call table files arch/mips/kernel/scall32-o32.S | 2 +- arch/mips/kernel/scall64-n32.S | 2 +- arch/mips/kernel/scall64-n64.S | 2 +- arch/mips/kernel/scall64-o32.S | 2 +- arch/mips/kernel/syscalls/Makefile | 6 +++--- arch/mips/kernel/syscalls/syscallhdr.sh | 37 --------------------------------- arch/mips/kernel/syscalls/syscallnr.sh | 28 ------------------------- arch/mips/kernel/syscalls/syscalltbl.sh | 36 -------------------------------- 8 files changed, 7 insertions(+), 108 deletions(-) delete mode 100644 arch/mips/kernel/syscalls/syscallhdr.sh delete mode 100644 arch/mips/kernel/syscalls/syscallnr.sh delete mode 100644 arch/mips/kernel/syscalls/syscalltbl.sh -- 1.9.1

5 years, 3 months

[PATCH v3] generic/390: Add tests for inode timestamp policy

by Deepa Dinamani

The test helps to validate clamping and mount behaviors according to supported file system timestamp ranges. Note that the test can fail on 32-bit systems for a few file systems. This will be corrected when vfs is transitioned to use 64-bit timestamps. Signed-off-by: Deepa Dinamani <deepa.kernel(a)gmail.com> --- The branch of the kernel tree can be located at https://github.com/deepa-hub/vfs refs/heads/vfs_timestamp_policy The xfs_io patch to add utimes is at https://www.spinics.net/lists/linux-xfs/msg02952.html Changes since v2: * Refactored notrun handling * Updated comments Changes since v1: * Use xfs_io utimes command * Updated error handling * Reorganized code according to review comments common/rc | 48 +++++++++++++ tests/generic/390 | 192 ++++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/390.out | 2 + tests/generic/group | 1 + 4 files changed, 243 insertions(+) create mode 100755 tests/generic/390 create mode 100644 tests/generic/390.out diff --git a/common/rc b/common/rc index e3b54ec..17f025e 100644 --- a/common/rc +++ b/common/rc @@ -1960,6 +1960,51 @@ _run_aiodio() return $status } +# this test requires y2038 sysfs switch and filesystem +# timestamp ranges support. +_require_y2038() +{ + local device=${1:-$TEST_DEV} + local sysfsdir=/proc/sys/fs/fs-timestamp-check-on + + if [ ! -e $sysfsdir ]; then + _notrun "no kernel support for y2038 sysfs switch" + fi + + local tsmin tsmax + read tsmin tsmax <<<$(_filesystem_timestamp_range $device) + if [ $tsmin -eq -1 -a $tsmax -eq -1 ]; then + _notrun "filesystem $FSTYP timestamp bounds are unknown" + fi +} + +_filesystem_timestamp_range() +{ + device=${1:-$TEST_DEV} + case $FSTYP in + ext4) + if [ $(dumpe2fs -h $device 2>/dev/null | grep "Inode size:" | cut -d: -f2) -gt 128 ]; then + echo "-2147483648 15032385535" + else + echo "-2147483648 2147483647" + fi + ;; + + xfs) + echo "-2147483648 2147483647" + ;; + jfs) + echo "0 4294967295" + ;; + f2fs) + echo "-2147483648 2147483647" + ;; + *) + echo "-1 -1" + ;; + esac +} + # indicate whether YP/NIS is active or not # _yp_active() @@ -2070,6 +2115,9 @@ _require_xfs_io_command() echo $testio | egrep -q "Inappropriate ioctl" && \ _notrun "xfs_io $command support is missing" ;; + "utimes" ) + testio=`$XFS_IO_PROG -f -c "utimes" 0 0 0 0 $testfile 2>&1` + ;; *) testio=`$XFS_IO_PROG -c "$command help" 2>&1` esac diff --git a/tests/generic/390 b/tests/generic/390 new file mode 100755 index 0000000..f68b931 --- /dev/null +++ b/tests/generic/390 @@ -0,0 +1,192 @@ +#! /bin/bash +# FS QA Test 390 +# +# Tests to verify policy for filesystem timestamps for +# supported ranges: +# 1. Verify filesystem rw mount according to sysctl +# timestamp_supported. +# 2. Verify timestamp clamping for timestamps beyond max +# timestamp supported. +# +# Exit status 1: either or both tests above fail. +# Exit status 0: both the above tests pass. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016 Deepa Dinamani. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "exit \$status" 0 1 2 3 15 + +# Get standard environment, filters and checks. +. ./common/rc +. ./common/filter +. ./common/attr + +# remove previous $seqres.full before test +rm -f $seqres.full + +# Prerequisites for the test run. +_supported_fs generic +_supported_os Linux +_require_scratch +_require_xfs_io_command utimes + +# Compare file timestamps obtained from stat +# with a given timestamp. +check_stat() +{ + file=$1 + timestamp=$2 + + stat_timestamp=`stat -c"%X;%Y" $file` + + prev_timestamp="$timestamp;$timestamp" + if [ $prev_timestamp != $stat_timestamp ]; then + echo "$prev_timestamp != $stat_timestamp" | tee -a $seqres.full + fi +} + +run_test_individual() +{ + file=$1 + timestamp=$2 + update_time=$3 + + #check if the time needs update + if [ $update_time -eq 1 ]; then + echo "Updating file: $file to timestamp `date -d @$timestamp`" >> $seqres.full + $XFS_IO_PROG -f -c "utimes $timestamp 0 $timestamp 0" $file + if [ $? -ne 0 ]; then + echo "Failed to update times on $file" | tee -a $seqres.full + fi + fi + + tsclamp=$(($timestamp>$tsmax?$tsmax:$timestamp)) + echo "Checking file: $file Updated timestamp is `date -d @$tsclamp`" >> $seqres.full + check_stat $file $tsclamp +} + +run_test() +{ + update_time=$1 + + n=1 + + for TIME in "${TIMESTAMPS[@]}" + do + #Run the test + run_test_individual ${SCRATCH_MNT}/test_$n $TIME $update_time + + #update iterator + ((n++)) + done +} + +_scratch_mkfs &>> $seqres.full 2>&1 || _fail "mkfs failed" +_require_y2038 $SCRATCH_DEV + +read tsmin tsmax <<<$(_filesystem_timestamp_range $SCRATCH_DEV) +echo min supported timestamp $tsmin $(date --date=@$tsmin) >> $seqres.full +echo max supported timestamp $tsmax $(date --date=@$tsmax) >> $seqres.full + +# Test timestamps array + +declare -a TIMESTAMPS=( + $tsmin + 0 + $tsmax + $((tsmax+1)) + 4294967295 + 8589934591 + 34359738367 +) + +# Max timestamp is hardcoded to Mon Jan 18 19:14:07 PST 2038 +sys_tsmax=2147483647 +echo "max timestamp that needs to be supported by fs for rw mount is" \ + "$((sys_tsmax+1)) $(date --date=@$((sys_tsmax+1)))" >> $seqres.full + +read ts_check <<<$(cat /proc/sys/fs/fs-timestamp-check-on) + +_scratch_mount +result=$? + +if [ $ts_check -ne 0 ]; then + echo "sysctl filesystem timestamp check is on" >> $seqres.full + # check for mount failure if the minimum requirement for max timestamp + # supported is not met. + if [ $sys_tsmax -ge $tsmax ]; then + if [ $result -eq 0 ]; then + echo "mount test failed" | tee -a $seqres.full + exit + fi + else + if [ $result -ne 0 ]; then + echo "failed to mount $SCRATCH_DEV" | tee -a $seqres.full + exit + fi + fi +else + # if sysctl switch is off then mount should succeed always. + echo "sysctl filesystem timestamp check is off" >> $seqres.full + if [ $result -ne 0 ]; then + echo "failed to mount $SCRATCH_DEV and timestamp check is off" >> $seqres.full + exit + fi +fi + +# Begin test case 1 +echo "In memory timestamps update test start" >> $seqres.full + +# update time on the file +update_time=1 + +run_test $update_time + +echo "In memory timestamps update complete" >> $seqres.full + +echo "Unmounting and mounting scratch $SCRATCH_MNT" >> $seqres.full + +# unmount and remount $SCRATCH_DEV +_scratch_cycle_mount + +# Begin test case 2 + +n=1 + +# Do not update time on the file this time, just read from disk +update_time=0 + +echo "On disk timestamps update test start" >> $seqres.full + +# Re-run test +run_test $update_time + +echo "On disk timestamps update test complete" >> $seqres.full + +echo "y2038 inode timestamp tests completed successfully" + +# success, all done +status=0 +exit diff --git a/tests/generic/390.out b/tests/generic/390.out new file mode 100644 index 0000000..82bd4eb --- /dev/null +++ b/tests/generic/390.out @@ -0,0 +1,2 @@ +QA output created by 390 +y2038 inode timestamp tests completed successfully diff --git a/tests/generic/group b/tests/generic/group index 08007d7..d137d01 100644 --- a/tests/generic/group +++ b/tests/generic/group @@ -392,3 +392,4 @@ 387 auto clone 388 auto log metadata 389 auto quick acl +390 auto quick rw -- 2.7.4

5 years, 7 months

[GIT PULL] y2038: A build fix for compat mode

by Arnd Bergmann

The following changes since commit cfbe271667b7aba03b403aee916ccd457409d2e8: Merge tag 'y2038-syscall-abi' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into timers/2038 (2019-02-27 21:45:27 +0100) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git tags/y2038-fix for you to fetch changes up to 7e89a37c477c4caacde7b511c64720e20104945f: ipc: Fix building compat mode without sysvipc (2019-03-06 16:00:56 +0100) ---------------------------------------------------------------- y2038: A build fix for compat mode Here is one more patch on top of the y2038 changes already pulled for linux-5.1, for some reason this had escaped all testing. Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> ---------------------------------------------------------------- Arnd Bergmann (1): ipc: Fix building compat mode without sysvipc kernel/sys_ni.c | 3 +++ 1 file changed, 3 insertions(+)

5 years, 8 months

[PATCH] ipc: Fix building compat mode without sysvipc

by Arnd Bergmann

As John Stultz noticed, my y2038 syscall series caused a link failure when CONFIG_SYSVIPC is enabled but CONFIG_COMPAT is enabled: arch/arm64/kernel/sys32.o:(.rodata+0x960): undefined reference to `__arm64_compat_sys_old_semctl' arch/arm64/kernel/sys32.o:(.rodata+0x980): undefined reference to `__arm64_compat_sys_old_msgctl' arch/arm64/kernel/sys32.o:(.rodata+0x9a0): undefined reference to `__arm64_compat_sys_old_shmctl' Add the missing entries in kernel/sys_ni.c for the new system calls. Cc: Laura Abbott <labbott(a)redhat.com> Cc: John Stultz <john.stultz(a)linaro.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> --- I'm about to send off my pull requests for arm-soc, so I'd just send another one with just this common from my y2038 tree. --- kernel/sys_ni.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c index 85e5ccec0955..62a6c8707799 100644 --- a/kernel/sys_ni.c +++ b/kernel/sys_ni.c @@ -202,6 +202,7 @@ COND_SYSCALL(msgget); COND_SYSCALL(old_msgctl); COND_SYSCALL(msgctl); COND_SYSCALL_COMPAT(msgctl); +COND_SYSCALL_COMPAT(old_msgctl); COND_SYSCALL(msgrcv); COND_SYSCALL_COMPAT(msgrcv); COND_SYSCALL(msgsnd); @@ -212,6 +213,7 @@ COND_SYSCALL(semget); COND_SYSCALL(old_semctl); COND_SYSCALL(semctl); COND_SYSCALL_COMPAT(semctl); +COND_SYSCALL_COMPAT(old_semctl); COND_SYSCALL(semtimedop); COND_SYSCALL(semtimedop_time32); COND_SYSCALL(semop); @@ -221,6 +223,7 @@ COND_SYSCALL(shmget); COND_SYSCALL(old_shmctl); COND_SYSCALL(shmctl); COND_SYSCALL_COMPAT(shmctl); +COND_SYSCALL_COMPAT(old_shmctl); COND_SYSCALL(shmat); COND_SYSCALL_COMPAT(shmat); COND_SYSCALL(shmdt); -- 2.20.0

5 years, 8 months

[PATCH 0/2] powerpc: Unify the system call scripts

by Firoz Khan

System call table generation support is provided for alpha, ia64, m68k, microblaze, mips, parisc, powerpc, sh, sparc and xtensa architectures. The implementat- ions are almost similar across all the above archte- ctures. In order to reduce the source code across all the above architectures, create common ".sh" files and keep it in the common directory, script/. This will be a generic scripts which can use for all the above architectures. This patch depends on; https://lore.kernel.org/lkml/1546439331-18646-1-git-send-email-firoz.khan@l… Firoz Khan (2): powerpc: remove nargs from __SYSCALL powerpc: generate uapi header and system call table files arch/powerpc/kernel/syscalls/Makefile | 11 +++++++-- arch/powerpc/kernel/syscalls/syscallhdr.sh | 37 ----------------------------- arch/powerpc/kernel/syscalls/syscalltbl.sh | 36 ---------------------------- arch/powerpc/kernel/systbl.S | 6 ++--- arch/powerpc/platforms/cell/spu_callbacks.c | 2 +- 5 files changed, 13 insertions(+), 79 deletions(-) delete mode 100644 arch/powerpc/kernel/syscalls/syscallhdr.sh delete mode 100644 arch/powerpc/kernel/syscalls/syscalltbl.sh -- 1.9.1

5 years, 8 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

Y2038 March 2019